KIDDE KE-IO3122 Intelligent Addressable Ob Plaub Plaub Tawm Tawm Module
Cov lus qhia siv khoom
CEEB TOOM: Teeb meem hluav taws xob. Xyuas kom txhua lub zog qhov chaw raug tshem tawm ua ntej kev teeb tsa.
Ceev faj: Ua raws li EN 54-14 cov qauv thiab hauv zos cov cai rau kev npaj thiab tsim qauv.
- Siv daim ntawv thov NeXT System Builder los txiav txim siab tshaj plaws muaj peev xwm.
- Nruab lub module nyob rau hauv ib tug sib haum tiv thaiv vaj tse (eg, N-IO-MBX-1 DIN Rail Module Box).
- Lub ntiaj teb yog lub tsev tiv thaiv.
- Mount lub vaj tse ruaj ntseg ntawm phab ntsa.
- Txuas cov hlua hlau raws li Table 1 thiab siv tau pom zoo cable specifications los ntawm Table 2.
- Teem lub cuab yeej chaw nyob (001-128) siv DIP hloov. Xa mus rau lub muab cov duab rau configuration.
- Cov tswv yim hom yog teem rau ntawm lub vaj huam sib luag tswj. Ntau hom yog muaj nrog cov kev xav tau ntawm cov resistor (saib rau Table 3).
FAQ
- Q: Kuv puas tuaj yeem nruab lub module sab nraum zoov?
- A: Tsis yog, lub module yog tsim rau sab hauv tsev installation nkaus xwb.
- Q: Yuav ua li cas kuv thiaj paub qhov siab tshaj plaws nyob deb ntawm lub voj hlau?
- A: Qhov siab tshaj plaws nyob deb ntawm lub input davhlau ya nyob twg mus rau qhov kawg ntawm kab yog 160m.
- Q: Dab tsi firmware version yog sib xws nrog no module?
- A: Lub module yog sib xws nrog firmware version 5.0 los yog tom qab ntawd rau 2X-A Series hluav taws tswb tswj vaj huam sib luag.
Daim duab 1: Device dhauview (KOJ-IO3144)
- Loop terminal block
- Mounting qhov (× 4)
- Kuaj (T) khawm
- Channel (C) khawm
- Input terminal blocks
- Input status LEDs
- Output xwm txheej LEDs
- Tso zis terminal blocks
- DIP hloov
- Ntaus xwm txheej LED
Daim duab 2: Cov tswv yim sib txuas
- Hom li qub
- Bi-Level hom
- Nquag Qhib hom
- Nquag kaw hom
Kev piav qhia
Daim ntawv teeb tsa no suav nrog cov ntaub ntawv hauv qab no 3000 Series input / output modules.
| Qauv | Kev piav qhia | Hom ntaus ntawv |
| TIAB SA 3122 | Intelligent addressable 2 input/output module nrog luv luv Circuit Court isolator | 2 Ib |
| TIAB SA 3144 | Intelligent addressable 4 input/output module nrog luv luv Circuit Court isolator | 4 Ib |
- Txhua module suav nrog kev sib txuas luv luv Circuit Court cais thiab tsim nyog rau kev teeb tsa sab hauv tsev.
- Txhua 3000 Series modules txhawb nqa Kidde Excellence raws tu qauv thiab siv tau nrog 2X-A Series hluav taws tswb tswj vaj huam sib luag nrog firmware version 5.0 lossis tom qab.
Kev teeb tsa
CEEB TOOM: Kev puas tsuaj hluav taws xob. Txhawm rau zam kev raug mob ntawm tus kheej lossis kev tuag los ntawm hluav taws xob, tshem tawm tag nrho cov peev txheej ntawm lub zog thiab cia lub zog khaws cia kom tso tawm ua ntej txhim kho lossis tshem cov khoom siv.
Ceev faj: Rau cov lus qhia dav dav ntawm kev npaj, tsim, kev teeb tsa, commissioning, siv, thiab kev saib xyuas, xa mus rau EN 54-14 tus qauv thiab cov cai hauv zos.
Txhim kho lub module
- Ib txwm siv daim ntawv thov NeXT System Builder los xam cov lej siab tshaj plaws uas tuaj yeem ntsia tau.
- Lub module yuav tsum tau muab tso rau hauv ib tug sib haum tiv thaiv vaj tse (tsis muab) - peb xav kom N-IO-MBX-1 DIN Rail Module Box. Nco ntsoov lub ntiaj teb tiv thaiv vaj tse.
- Nco tseg: Lwm qhov kev tiv thaiv vaj tse yuav raug siv los muab nws ua tau raws li cov lus qhia tshwj xeeb hauv "Protective Housing" ntawm nplooj 4.
- Mount cov vaj tse tiv thaiv rau ntawm phab ntsa siv qhov tsim nyog mounting system rau cov yam ntxwv ntawm phab ntsa.
Txuas lub module
Txuas cov hlua khi raws li qhia hauv qab no. Saib Table 2 rau kev pom zoo cable specifications.
Table 1: Loop kev twb kev txuas
| Terminal | Kev piav qhia |
| B- | Kab tsis zoo (–) |
| A- | Kab tsis zoo (–) |
| B+ | Kab lus zoo (+) |
| A+ | Kab lus zoo (+) |
Table 2: Pom zoo cable specifications
| Kab | Specification |
| Loop | 0.13 txog 3.31 mm² (26 mus rau 12 AWG) shielded los yog unshielded twisted khub (52 Ω thiab 500 nF max.) |
| Tso zis | 0.13-3.31 mm² (26-12 AWG) shielded los yog unshielded twisted-pair |
| Input [1] | 0.5-4.9 mm² (20-10 AWG) shielded los yog unshielded twisted-pair |
| [1] Qhov siab tshaj plaws kev ncua deb ntawm lub input davhlau ya nyob twg mus rau qhov kawg ntawm kab yog 160 m. | |
- [1] Qhov siab tshaj plaws kev ncua deb ntawm lub input davhlau ya nyob twg mus rau qhov kawg ntawm kab yog 160 m.
- Saib daim duab 2 thiab "Input configuration" hauv qab no rau kev sib txuas lus.
Hais txog qhov module
- Teem lub cuab yeej chaw nyob siv DIP hloov. Qhov chaw nyob yog 001-128.
- Qhov chaw nyob ntawm cov cuab yeej teeb tsa yog cov lej ntawm cov keyboards hauv ON txoj haujlwm, raws li pom hauv cov duab hauv qab no.
Cov lus qhia configuration
Lub module input hom yog configured ntawm lub vaj huam sib luag tswj (Tsav teeb> Loop device configuration).
Cov hom muaj yog:
- Ib txwm
- Bi-Level
- Nquag Qhib (NO)
- Nquag Kaw (NC)
Txhua qhov kev tawm tswv yim tuaj yeem teeb tsa rau ib hom sib txawv yog tias xav tau.
Cov resistors xav tau rau txhua hom yog qhia hauv qab no.
Table 3: Input configuration resistors
| Qhov kawg ntawm kab resistor | Series resistor [1] | Series resistor [1] | |
| Hom | 15 kΩ, ¼ W, 1% | 2 kΩ, ¼ W, 5% | 6.2 kΩ, ¼ W, 5% |
| Ib txwm | X | X | |
| Bi-Level | X | X | X |
| TSIS MUAJ | X | ||
| NC | X | ||
| [1] Nrog rau kev hloov pauv. | |||
Hom li qub
Hom ib txwm siv tau rau kev siv hauv kev teeb tsa uas xav tau EN 54-13 ua raws.
Input activation yam ntxwv rau hom no muaj nyob rau hauv cov lus hauv qab no.
Table 4: Hom li qub
| Xeev | Ua kom tus nqi |
| Luv luv | <0.3 kΩ |
| Active 2 | 0.3kΩ txog 7kΩ |
| Siab tsis kam ua txhaum | 7kΩ txog 10kΩ |
| Tub Nyab | 10kΩ txog 17kΩ |
| Qhib Circuit Court | > 17 kΩ |
Bi-Level hom
- Bi-Level hom tsis sib xws rau kev siv hauv kev teeb tsa uas yuav tsum tau ua raws EN 54-13.
- Input activation yam ntxwv rau hom no muaj nyob rau hauv cov lus hauv qab no.
Table 5: Bi-Level mode
| Xeev | Ua kom tus nqi |
| Luv luv | <0.3 kΩ |
| Active 2 [1] | 0.3kΩ txog 3kΩ |
| Active 1 | 3kΩ txog 7kΩ |
| Tub Nyab | 7kΩ txog 27kΩ |
| Qhib Circuit Court | > 27 kΩ |
| [1] Active 2 siv qhov tseem ceeb tshaj Active 1. | |
Nquag Qhib hom
Nyob rau hauv hom no, luv luv Circuit Court yog txhais raws li active nyob rau hauv lub tswj vaj huam sib luag (tsuas yog qhib Circuit Court faults raug ceeb toom).
Nquag kaw hom
Nyob rau hauv hom no, qhib Circuit Court yog txhais raws li active nyob rau hauv lub tswj vaj huam sib luag (tsuas yog luv luv Circuit Court faults raug ceeb toom).
Cov xwm txheej qhia
- Cov xwm txheej ntawm cov cuab yeej yog qhia los ntawm Cov Khoom Siv raws li txoj cai LED (Daim duab 1, yam 10), raws li qhia hauv cov lus hauv qab no.
Table 6: Ntaus xwm txheej LED qhia
| Xeev | Qhov taw qhia |
| Kev rho tawm nquag | Lub teeb daj LED |
| Cov cuab yeej ua txhaum | Flashing daj LED |
| Test hom | Fast flashing liab LED |
| Cov khoom siv hauv tsev [1] | Steady ntsuab LED |
| Kev sib txuas lus [2] | Flashing ntsuab LED |
| [1] Qhia txog qhov ua haujlwm Locate Device hais kom ua los ntawm kev tswj vaj huam sib luag. [2] Qhov kev taw qhia no tuaj yeem cuam tshuam los ntawm kev tswj hwm vaj huam sib luag lossis daim ntawv thov Configuration Utility. | |
Cov txheej txheem input yog qhia los ntawm Input status LED (Daim duab 1, yam 6), raws li qhia hauv cov lus hauv qab no.
Table 7: Input status LED indications
| Xeev | Qhov taw qhia |
| Active 2 | Lub teeb liab LED |
| Active 1 | Flashing liab LED |
| Qhib Circuit Court, luv luv | Flashing daj LED |
| Test hom [1] Active Fault Normal
Kev sim ua kom ua haujlwm |
Steady liab LED Steady yellow LED Steady ntsuab LED Flashing ntsuab LED |
| [1] Cov kev qhia no tsuas pom thaum lub module nyob rau hauv Test hom. | |
Cov xwm txheej tso zis yog qhia los ntawm Cov Txheej Txheem Tso Tawm LED (Daim duab 1, yam 7), raws li qhia hauv cov lus hauv qab no.
Table 8: Tso zis raws li txoj cai LED indications
| Xeev | Qhov taw qhia |
| Active | Flashing liab LED (flashing tsuas yog thaum polled, txhua 15 vib nas this) |
| txhaum | Flashing daj LED (flashing tsuas yog thaum polled, txhua 15 vib nas this) |
| Test hom [1] Active Fault Normal
Xaiv rau kev xeem [2] Test Activation |
Steady liab LED Steady yellow LED Steady ntsuab LED Slow flashing ntsuab LED qeeb flashing liab LED |
| [1] Cov kev qhia no tsuas pom thaum lub module nyob rau hauv Test hom. [2] Tsis qhib. | |
Kev tu thiab kev sim
Kev tu thiab tu
- Kev saib xyuas yooj yim muaj kev tshuaj xyuas txhua xyoo. Tsis txhob hloov cov kab hluav taws xob sab hauv lossis cov kab hluav taws xob.
- Ntxuav sab nraum lub module siv adamp daim ntaub.
Kev sim
- Kuaj lub module raws li tau piav qhia hauv qab no.
- Saib daim duab 1 rau qhov chaw kuaj (T) khawm, Channel (C) khawm, Device Status LED, Input status LED, thiab Output status LED. Saib Table 6, Table 7, thiab Table 8 rau cov xwm txheej LED qhia.
Txhawm rau ua qhov kev xeem
- Nias thiab tuav lub pob Test (T) tsawg kawg yog 3 vib nas this (ntev nias) kom txog rau thaum Device status LED flashes liab (ceev flashing), thiab ces tso lub pob.
Lub module nkag mus rau Test hom.
Cov cuab yeej xwm txheej LED flashes liab rau lub sijhawm ntawm qhov kev sim.
Lub tswv yim / tso zis raws li LEDs qhia lub tswv yim / tso zis lub xeev ntawm kev nkag mus rau Test hom: ib txwm (ntxuav ntsuab), nquag (ntxhiab liab), los yog txhaum (tsis khov daj).
Lus Cim: Cov tswv yim tuaj yeem kuaj tau thaum lub xeev cov tswv yim zoo li qub. Yog tias LED qhia tias muaj kev ua haujlwm lossis ua txhaum, tawm ntawm qhov kev sim. Cov zis tuaj yeem kuaj tau hauv txhua lub xeev. - Nias lub Channel (C) khawm.
Cov kev xaiv nkag / tso zis raws li LED flashes los qhia txog kev xaiv.
Cov tswv yim 1 yog thawj channel xaiv. Txhawm rau kuaj cov tswv yim sib txawv / tso tawm, nias lub Channel (C) khawm dua kom txog rau thaum qhov yuav tsum tau muaj cov tswv yim / tso zis LED flashes. - Nias lub pob Test (T) (nias luv) pib qhov kev xeem.
Qhov kev xaiv nkag los yog qhov kev xeem tso zis qhib qhib.
Saib Table 9 hauv qab no kom paub meej qhov kev xeem nkag thiab tso zis. - Txhawm rau tso tseg qhov kev xeem thiab tawm hauv hom kev xeem, nias thiab tuav lub Test (T) khawm dua li tsawg kawg 3 vib nas this (ntev nias).
Nias lub Channel (C) khawm dua tom qab lub xeem channel raug xaiv kuj tawm hauv qhov kev xeem.
Lub module tawm ntawm qhov kev xeem tau txais tom qab 5 feeb yog tias qhov ntsuas (T) khawm tsis nias.
Tom qab qhov kev ntsuam xyuas cov tswv yim lossis cov zis rov qab mus rau nws qhov qub.
Nco tseg
Yog tias ib qho kev tawm tswv yim tau qhib, qhov Input status LED qhia txog lub xeev ua kom thaum lub module tawm ntawm Test hom. Pib dua lub tswj vaj huam sib luag kom tshem tawm qhov taw qhia LED.
Lub module tawm Test hom cia li yog hais tias tus tswj vaj huam sib luag xa ib tug hais kom hloov ib tug relay (rau example ib lub tswb hais kom ua) lossis yog tias cov tswj vaj huam sib luag rov pib dua.
Table 9: Kev xeem nkag thiab tso zis
| Input/Output | Kuaj |
| Tswv yim | Cov txheej txheem input LED flashes liab (slow flashing) los qhia qhov kev xeem.
Cov tswv yim qhib rau 30 vib nas this thiab cov xwm txheej ua kom raug xa mus rau pawg tswj hwm. Nias lub Test (T) khawm dua kom txuas ntxiv qhov kev xeem nkag mus rau lwm 30 vib nas this, yog tias xav tau. |
| Tso zis | Yog tias lub xeev tso zis tsis tau qhib thaum nkag mus rau Test hom, cov zis LED teeb nyem ntsuab.
Yog hais tias lub xeev tso zis tau qhib thaum nkag mus rau Test hom, cov Output status LED flashes liab. Nias lub Test (T) khawm dua (nias luv) pib qhov kev xeem. Yog hais tias qhov pib tso zis lub xeev (saum toj no) tsis qhib, cov Output status LED flashes liab. Yog tias qhov pib tso zis hauv lub xeev (saum toj no) tau qhib, qhov Output status LED flashes ntsuab. Txheeb xyuas tias cov khoom siv txuas nrog lossis cov khoom siv ua haujlwm raug. Nias lub Test (T) khawm dua los hloov lub xeev relay dua, yog tias xav tau. |
Specifications
Hluav taws xob
| Kev khiav hauj lwm voltage | 17 ~ 29VDC (4 ~ 11V mem tes) |
| Tam sim no noj Standby
KE-IO3122 KE-IO3144 Active KE-IO3122 KE-IO3144 |
300 µA A ntawm 24 VDC 350 µA A ntawm 24 VDC
2.5 mA ntawm 24 VDC 2.5 mA ntawm 24 VDC |
| Qhov kawg ntawm kab resistor | 15 kΩ, ¼ W, 1% |
| Polarity rhiab heev | Yog lawm |
| Tus naj npawb ntawm inputs KE-IO3122 KE-IO3144 |
2 4 |
| Tus naj npawb ntawm cov zis KE-IO3122 KE-IO3144 |
2 4 |
Muab cais nyob ib leeg
| Kev siv tam sim no (kev cais tawm ua haujlwm) | 2.5 mA |
| Rho tawm voltage
Yam tsawg kawg nkaus |
14 VDC 15.5 VDC |
| Reconnect voltage Yam tsawg kawg nkaus |
14 VDC 15.5 VDC |
| Rated tam sim no
Nruam (hloov kaw) Switching (short circuit) |
1.05 A 1.4 A |
| Cov dej ntws tam sim no | 1 mA max. |
| Series impedance | 0.08 Ω max. |
| Maximum impedance [1]
Nruab nrab ntawm tus thawj cais thiab tswj vaj huam sib luag Nruab nrab ntawm txhua qhov kev cais tawm |
13 Ω
13 Ω |
| Number of isolators ib lub voj | 128 max. |
| Tus naj npawb ntawm cov khoom siv nruab nrab ntawm cov khoom sib cais | 32 max. |
| [1] Sib npaug rau 500 m ntawm 1.5 mm2 (16 AWG) cable. | |
Mechanical thiab ib puag ncig
| Kev ntsuas IP | IP30 |
| Kev khiav hauj lwm ib puag ncig Kev khiav hauj lwm kub Cia kub Relative humidity |
-22 txog +55 ° C -30 txog +65 ° C 10 mus rau 93% (noncondensing) |
| Xim | Dawb (zoo ib yam li RAL 9003) |
| Khoom siv | ABS + PC |
| Qhov hnyav
KE-IO3122 KE-IO3144 |
135 g ib 145 g ib |
| Qhov Loj (W × H × D) | 148 × 102 × 27 mm |
Kev tiv thaiv vaj tse
Nruab lub module nyob rau hauv ib tug tiv thaiv vaj tse uas ua tau raws li nram no specifications.
| Kev ntsuas IP | Min. IP30 (hauv tsev installation) |
| Khoom siv | Hlau |
| Qhov hnyav [1] | Min. 4.75 kg ib |
| [1] Tsis suav nrog module. | |
Cov ntaub ntawv tswj hwm
Tshooj lus no muab cov ntsiab lus ntawm cov lus tshaj tawm ua haujlwm raws li Txoj Cai Kev Tsim Kho Khoom Siv (EU) 305/2011 thiab Cov Txheej Txheem Delegated (EU) 157/2014 thiab (EU) 574/2014.
Yog xav paub ntxiv, saib cov khoom Tshaj Tawm ntawm Kev Ua Haujlwm (muaj nyob ntawm firesecurityproducts.com).
| Kev sib haum xeeb |  |
| Ceeb Toom/pom zoo lub cev | 0370 |
| Chaw tsim tshuaj paus | Carrier Safety System (Hebei) Co. Ltd., 80 Changjiang East Road, QETDZ, Qinhuangdao 066004, Hebei, Suav.
Tso cai EU tsim tus neeg sawv cev: Carrier Fire & Security BV, Kelvinstraat 7, 6003 DH Weert, Netherlands. |
| Xyoo ntawm thawj CE cim | 2023 |
| Tshaj tawm ntawm Kev Ua Haujlwm naj npawb | 12-0201-360-0004 |
| TS EN 54 | EN 54-17, EN 54-18 |
| Kev txheeb xyuas cov khoom | KE-IO3122, KE-IO3144 |
| Npaj siv | Saib cov khoom tshaj tawm ntawm Kev Ua Haujlwm |
| Tshaj tawm kev ua haujlwm | Saib cov khoom tshaj tawm ntawm Kev Ua Haujlwm |
 |
2012/19/EU (WEEE Directive): Cov khoom lag luam cim nrog lub cim no tsis tuaj yeem muab pov tseg raws li cov pov tseg hauv nroog tsis muaj nyob hauv European Union. Rau kev rov ua dua tshiab kom raug, xa cov khoom no rov qab rau koj lub chaw muag khoom hauv zos thaum yuav cov khoom siv tshiab sib npaug, lossis muab pov tseg ntawm cov ntsiab lus sau tseg. Yog xav paub ntxiv mus saib: recyclethis.info. |
Tiv tauj cov ntaub ntawv thiab cov ntaub ntawv ntawm cov khoom
- Yog xav paub ntaub ntawv tiv tauj lossis mus download tau cov ntaub ntawv khoom tshiab, mus saib firesecurityproducts.com.
Cov khoom ceeb toom thiab tsis lees paub
Cov khoom no yog npaj rau kev muag khoom thiab kev teeb tsa los ntawm cov kws tshaj lij uas tsim nyog. CARRIER FIRE & SECURITY BV tsis tuaj yeem muab kev lees paub tias ib tus neeg lossis chaw yuav khoom nws cov khoom, suav nrog "Tus neeg muag khoom tau tso cai" lossis "tus neeg muag khoom tau txais kev tso cai", tau raug cob qhia los yog EXTECURITY ATED PRODUCTS.
Yog xav paub ntxiv txog kev lees paub tsis lees paub thiab cov ntaub ntawv kev nyab xeeb ntawm cov khoom, thov mus saib https://firesecurityproducts.com/policy/product-warning/ los yog luam theej duab QR code:
Cov ntaub ntawv / Cov ntaub ntawv
 |
KIDDE KE-IO3122 Intelligent Addressable Ob Plaub Plaub Tawm Tawm Module [ua pdf] Daim ntawv qhia kev teeb tsa KE-IO3122, KE-IO3144, KE-IO3122 Intelligent Addressable Ob Plaub Plaub Input Output Module, KE-IO3122, Intelligent Addressable Ob Plaub Plaub Input Output Module, Ob Plaub Plaub Input Output Module, Input Output Module, Output Module |
