DOSTMANN LOG40 Data Logger don Zazzabi da Sensor na waje

Gabatarwa

Mun gode sosai don siyan ɗayan samfuranmu. Kafin yin aiki da ma'aunin bayanan da fatan za a karanta wannan littafin a hankali. Za ku sami bayanai masu amfani don fahimtar duk ayyuka

Abubuwan bayarwa

• Bayanan Bayani na LOG40
• 2 x Baturi 1.5 Volt AAA (an riga an saka shi)
• Kebul kariyar hula
• Kit ɗin hawa

Sanarwa da kyau / Umarnin Tsaro

• Bincika idan abinda ke cikin kunshin bai lalace ba kuma ya cika.
• Cire bayanan kariya sama da nuni.
• Don tsaftace kayan aikin don Allah kar a yi amfani da abin goge goge kawai busasshen zane mai laushi ko rigar. Kada ka ƙyale kowane ruwa zuwa cikin na'urar.
• Da fatan za a adana kayan aunawa a bushe da wuri mai tsabta.
•  Guji kowane ƙarfi kamar girgiza ko matsa lamba ga kayan aiki.
• Ba a ɗauki alhakin ƙima ba bisa ƙa'ida ba ko rashin cika ma'auni da sakamakon su, ba a keɓe alhakin lalacewa na gaba!
• Ka kiyaye waɗannan na'urori da batura daga wurin da yara za su iya isa.
• Batura sun ƙunshi acid masu cutarwa kuma suna iya zama haɗari idan an haɗiye su. Idan baturi ya haɗiye, wannan na iya haifar da mummunan kuna na ciki da mutuwa a cikin sa'o'i biyu. Idan kuna zargin ana iya haɗiye baturi ko kuma an kama shi a cikin jiki, nemi taimakon likita nan da nan.
• Ba dole ba ne a jefa batura cikin wuta, gajeriyar kewayawa, cirewa ko sake caji. Hadarin fashewa!
• Ya kamata a canza ƙananan batura da wuri -wuri don hana ɓarna da zubar ruwa ke haifarwa. Kada a taɓa amfani da haɗin tsoffin da sabbin batura tare, ko batir iri iri.
• Sanya safofin hannu masu kariya daga sunadarai da tabarau na aminci lokacin kula da batir mai yawo.

Kayan aiki da amfani

Ana amfani da na'urar aunawa don yin rikodi, ƙararrawa, da duba yanayin zafi da, tare da na'urori masu auna firikwensin waje, haka nan don ɗanɗano zafi da matsa lamba. Wuraren aikace-aikacen sun haɗa da saka idanu akan yanayin ajiya da sufuri ko wasu zafin jiki, danshi da/ko matakai masu matsi. Logger yana da ginanniyar tashar USB kuma ana iya haɗa shi ba tare da igiyoyi ba zuwa duk kwamfutocin Windows, kwamfutocin Apple ko allunan (ana iya buƙatar adaftar USB). Ana kiyaye tashar USB ta hular filastik. Bayan ainihin sakamakon aunawa, nunin yana nuna ma'aunin MIN- MAX- da AVG na kowane tashar aunawa. Layin matsayi na ƙasa yana nuna ƙarfin baturi, yanayin shiga da yanayin ƙararrawa. Koren LED yana walƙiya kowane sakan 30 yayin rikodi. Ana amfani da jajayen LED don nuna iyakacin ƙararrawa ko saƙonnin matsayi (canjin baturi… da sauransu). Logger kuma yana da buzzer na ciki wanda ke goyan bayan ƙirar mai amfani. Wannan samfurin an yi niyya ne kawai don filin aikace-aikacen da aka kwatanta a sama. Ya kamata a yi amfani da shi kawai kamar yadda aka bayyana a cikin waɗannan umarnin. An hana gyare-gyare, gyare-gyare ko canje-canje ga samfurin ba tare da izini ba kuma sun ɓace kowane garanti!

Yadda ake amfani da na'ura

Bayanin na'urar

1. Rataye madauki
2. LCD cf. fig. B
3. LED: rouge/vert
4. Maɓallin yanayi
5. Maballin Fara / Tsaya
6. Akwatin baturi a gefen baya
7. Murfin USB a ƙasa mai haɗin USB (ana kuma amfani da tashar USB don haɗa na'urori masu auna firikwensin waje)

1. Raka'a don auna ƙima / extrema
   1. EXT = bincike na waje
   2. AVG = matsakaicin ƙima,
   3. MIN = mafi ƙarancin ƙima,
   4. MAX = matsakaicin ƙima (babu alama) = ƙimar ma'aunin yanzu
2. Aunawa
3. Layin matsayi (daga hagu zuwa dama)

• Nunin baturi,
• Data logger yana yin rikodi,
• An saita mai shigar da bayanai,
• iO, (ohne ► Alama) und
• Ƙararrawa aufgetreten nicht iO (ohne ► Alama)

Idan an kashe nunin (nuni a kashe ta Software LogConnect), alamar baturi da alamar rikodi (►) ko daidaitawa (II) har yanzu suna aiki a Layi 4 (layin matsayi).

Farkon na'ura
rarrabuwa fitar da kayan aiki daga marufi, cire foil ɗin nuni. An riga an saita logger kuma an shirya don farawa. Ana iya amfani da shi nan da nan ba tare da kowace software ba! Ta latsa kowane maɓalli ko matsar da kayan aikin kafin fara aiki kayan aikin yana nuna FS (saitin masana'anta) na daƙiƙa 2, bayan haka ana nuna ma'auni na mintuna 2. Sannan nunin kayan aiki yana kashe. Maɓalli mai maimaitawa ko motsi yana sake kunna nuni.

Saitunan masana'anta
Kula da waɗannan saitunan tsoho na mai shigar da bayanai kafin fara amfani da su. Ta amfani da LogConnect (duba ƙasa 5.2.2.1 Kanfigareshan Software Log Connect) software, za'a iya canza ma'aunin saitin cikin sauƙi:

• Tazarar Rikodi: 15 min.
• Aunawa tazara: Yayin yin rikodin tazarar ma'auni da tazarar rikodi iri ɗaya ne! Idan ba'a fara ma'auni ba (BA RUBUTU ba) tazarar ma'auni shine kowane sakan 6 na mintuna 15, bayan haka tazarar awo shine kowane minti 15. tsawon sa'o'i 24, bayan haka tazarar ma'aunin shine sau ɗaya a cikin awa ɗaya. Idan ka danna kowane maɓalli ko matsar da na'urar zai sake farawa don auna kowane sakan 6.
• Fara mai yiwuwa by: Latsa maɓalli
• Dakata mai yiwuwa ta: kebul na USB
• Ƙararrawa: kashe
• Jinkirin ƙararrawaku: 0s
• Nuna ma'auni akan nuni: a yi
• Yanayin Ajiye Wuta don nuni: a yi

Yanayin Ajiye Wuta don Nuni
Ana kunna Yanayin Ajiye Wuta azaman ma'auni. Nunin yana kashewa lokacin da tsawon mintuna 2 ba a danna maɓalli ba ko kuma ba a motsa na'urar ba. Mai shigar da shiga yana aiki har yanzu, nuni kawai yana kashe. Agogon ciki yana gudana. Matsar da logger zai sake kunna nuni.

Windows Software don LOG40
An riga an saita kayan aikin kuma an shirya don farawa. Ana iya amfani da shi ba tare da wani software ba! Koyaya, akwai aikace-aikacen Windows kyauta don saukewa. Da fatan za a lura hanyar haɗin yanar gizon kyauta don amfani: duba ƙasa 5.2.2.1 Kanfigareshan Software Log Connect

Haɗin Shiga Software Kanfigareshan
Ta wannan software mai amfani zai iya canza ma'aunin daidaitawa kamar auna tazara, fara jinkiri(ko wasu sigogin farawa), ƙirƙirar matakan ƙararrawa ko canza lokacin agogo na ciki Haɗin log ɗin Software ya ƙunshi taimako kan layi. Zazzage software na LogConnect kyauta: www.dostmann-electronic.de

Erster Start & Aufzeichnung fara

• Maɓallin latsa na tsawon daƙiƙa 2, sautin ƙara na daƙiƙa 1, ainihin kwanan wata da lokaci za a nuna don ƙarin daƙiƙa 2.
• LED fitilu kore don 2 sconds - shiga ya fara!
• LED yana ƙyalli kore kowane sakan 30.

Nuni a Yanayin-Aiki (Nuni yana nuna duk tashar ma'auni a cikin jerin daƙiƙa 3)

Ta amfani da Software LogConnect, ana iya canza saitattun saitattu cikin sauƙi. Duba ƙasa Kanfigareshan Software Log Connect

Sensors na waje
Ana shigar da na'urori masu auna firikwensin waje cikin tashar USB akan ma'aunin bayanan. Sai dai idan an haɗa na'urori masu auna firikwensin lokacin da aka fara logger za a yi rikodin su!

Sake kunna rikodi
Duba 5.3. Farawa na farko / fara rikodi. Ana fara logger ta tsohuwa ta maɓalli kuma an dakatar da shi ta hanyar toshewar tashar USB. Ana ƙididdige ƙididdiga masu ƙima ta atomatik zuwa PDF file.

NOTE: Lokacin da kuka sake kunna PDF ɗin da ke akwai file an sake rubutawa.

Muhimmanci! Koyaushe ajiye PDF ɗin da aka samar files zuwa PC. Idan LogConnect yana buɗewa lokacin haɗa masu guntu kuma an zaɓi AutoSave a cikin Saituna (Tsoffin), ana kwafi sakamakon log ɗin zuwa wurin ajiya nan da nan ta tsohuwa.

Nuna ƙwaƙwalwar ajiyar da aka yi amfani da ita (%), kwanan wata da lokaci
Ta hanyar latsa maɓallin farawa a taƙaice (bayan farawa logger), MEM, ƙwaƙwalwar ajiya cikin kashi dari, MEM, rana/wata, Shekara da lokaci kowane don 2 seconds an nuna.

Dakatar da rikodi / ƙirƙirar PDF
Haɗa logger zuwa tashar USB. Beeper yana sauti na daƙiƙa 1. LED yana ƙyalli kore har sai an ƙirƙiri sakamako PDF (zai iya ɗaukar har zuwa 40 seconds). Alamar } bace a layin matsayi. Yanzu an dakatar da katako. Ana nuna Logger azaman drive mai cirewa LOG40. View PDF kuma ajiye. Za a sake rubuta PDF tare da farawa log na gaba!

Lura: Tare da rikodin na gaba Extrema (Max- da Min-darajar), kuma za a sake saita darajar AVG.

Dakatar da rikodi ta maɓalli.
Don dakatar da Logger ta maballin dole ne a canza saitin ta Software LogConnect. Idan an yi wannan saitin maɓallin farawa kuma shine maɓallin tsayawa

Bayanin sakamakon PDF file

Filesuna: eg
LOG32TH_14010001_2014_06_12T092900.DBF

• LOG32THNa'urar 14010001: Serial
• 2014_06_12: Fara rikodi (kwanan wata) T092900: lokaci: (hhmmss)
• Bayani: Log run info, gyara tare da LogConnect* software
• Kanfigareshan: saitattun sigogi
• Takaitawa: Overview sakamakon aunawa
• Zane-zane: Tsarin ma'auni
• Sa hannu: Sa hannu PDF idan an buƙata
• Auna Yayi : An kasa aunawa

Kebul-Haɗin
Don daidaitawa kayan aikin dole ne a haɗa su zuwa tashar USB na Kwamfutarka. Don daidaitawa don Allah karanta bisa ga babi kuma yi amfani da taimakon kan layi kai tsaye na Software LogConnect

Yanayin Nuni da Yanayin - Maɓallin: EXT, AVG, MIN, MAX

1. Yanayin AUTO
   Nuni a madadin yana nuna kowane sakan 3: Mafi ƙarancin (MIN) / Matsakaicin (AVG) / zazzabi na yanzu. Ana iya gano tashar meas da aka nuna ta hanyar naúrar jiki (° C / ° F = zazzabi, Td + ° C / ° F = dewpoint,% rH = zafi, hPa = matsa lamba na iska) tare da alamun tsawo = ƙimar ma'auni na yanzu, MIN = Mafi ƙarancin, MAX= Matsakaicin, AVG=matsakaici. Yanayin AUTO yana ba da sauriview akan ƙimar ma'auni na yanzu na duk tashoshi. Danna maɓallin MODE (maɓallin hagu) yana barin yanayin AUTO kuma ya shiga yanayin MANUAL:
2. Yanayin MANUAL
   Maɓallin MODE yana jujjuya duk ƙimar ma'aunin da ake samu, yana bin jerin ƙimar halin yanzu (babu alama), ƙarami (MIN), matsakaicin (MAX), matsakaici (AVG) da AUTO (Yanayin AUTO). Yanayin MANUAL yana da amfani ga view kowane tashar meas tare da babban tashar meas. Misali. matsa lamba iska vs. babban tashar iska matsa lamba. Danna maɓallin MODE har sai nuni ya nuna Auto don ci gaba da yanayin AUTO. EXT yana ƙaddamar da firikwensin waje. Yanayin MANUAL yana da amfani ga view kowane meas channel

Ayyukan Mode-Button na musamman

Saita alama
Don yiwa al'amura na musamman alama yayin rikodin, ana iya saita alamomi. Danna maɓallin MODE na tsawon daƙiƙa 2.5 har sai an yi ƙara kaɗan (duba alama akan Fig. C na PDF). Ana adana alamar tare da ma'auni na gaba (girmama tazarar rikodin!) .

Sake saita buffer MAX-MIN
Mai shiga yana da aikin MIN/MAX don yin rikodin ƙimar ƙima na kowane lokaci. Danna maɓallin MODE na tsawon daƙiƙa 5, har sai ɗan gajeren waƙar ya yi sauti. Wannan yana sake farawa lokacin awo. Ɗaya mai yuwuwar amfani shine gano yanayin zafin rana da dare. Aikin MIN/MAX yana gudana ba tare da rikodin bayanai ba.

Da fatan za a kula:

• A farkon rikodin, ana sake saita buffer MIN/MAX/AVG don nuna ƙimar MIN/MAX/AVG waɗanda suka dace da rikodi.
• Yayin yin rikodi, sake saita buffer MIN/MAX/AVG zai tilasta alamar.

Matsayin Baturi-Anzeige

• Alamar baturi mara komai tana nuna cewa ana buƙatar maye gurbin baturin. Na'urar za ta yi aiki daidai don ƙarin sa'o'i 10 kawai.
• Alamar baturi tana nunawa bisa ga matsayin baturi tsakanin sassa 0 da 3.
• Idan alamar baturi tana walƙiya, baturin ya zama fanko. Kayan aiki ba ya aiki!
• Buɗe sashin baturi tare da screwdriver Phillips. Sauya baturan biyu. Ana nuna polarity a ƙasan akwati na baturi. Kula da polarity. Idan canjin baturi yayi kyau, kunna haske don LEDs biyu suna haskaka kusan kusan. 1 seconds kuma sautin sigina yana sauti.
• Rufe dakin baturi.

Lura! Bayan maye gurbin baturin da fatan za a duba daidai lokaci da kwanan wata na agogon ciki. Don saita lokacin duba babi na gaba ko 5.2.2.1 Software na Kanfigareshan LogConnect.

Saita Kwanan wata da Lokaci bayan maye gurbin baturi ta maɓallin
Bayan maye gurbin baturi ko wuta ya katse kayan aikin ta atomatik yana canzawa zuwa yanayin sanyi don saita kwanan wata, lokaci da tazara. Idan ba za a danna maɓalli na daƙiƙa 20 naúrar tana ci gaba da kwanan wata da lokaci na ƙarshe a cikin ƙwaƙwalwar ajiya:

• Latsa N = Babu canjin kwanan wata da lokaci, ko
• Latsa Y= Ee don canza kwanan wata da lokaci
• Latsa maɓallin Yanayin-don ƙara ƙimar,
• danna Fara-button don tsalle zuwa ƙima ta gaba.
• Bayan lokaci-lokaci-buƙatar Interval (INT) za a iya canza.
• Latsa N = A'a don soke canje-canje, ko Latsa
• Y=Eh don tabbatar da canje-canje

Fadakarwa
Beeper yana yin sauti sau ɗaya kowane daƙiƙa 30 na daƙiƙa 1, jajayen LED yana ƙiftawa kowane daƙiƙa 3 - ƙimar ƙima ta wuce saitunan ƙararrawa da aka zaɓa (ba tare da daidaitattun saitunan ba). Ta Software LogConnect (5.2.2.1 Kanfigareshan software LogConnect.) Ana iya saita matakan ƙararrawa. Idan matakin ƙararrawa ya faru za a nuna X a ƙasan nuni. A daidai rahoton PDF-report za a nuna matsayin ƙararrawa, shima. Idan tashar aunawa ta nuna inda ƙararrawa ta faru, X a gefen dama na nuni yana kyalli. X yana ɓacewa lokacin da aka sake kunna kayan aiki don yin rikodi! Red LED yana ƙyalli sau ɗaya kowane daƙiƙa 4. Sauya baturi. Kiftawa sau biyu ko fiye kowane 4 scond. Laifin hardware!

Bayanin alamomi

Wannan alamar tana ba da tabbacin cewa samfurin ya cika buƙatun umarnin EEC kuma an gwada shi bisa ƙayyadaddun hanyoyin gwaji.

Sharar gida

An kera wannan samfurin da marufinsa ta amfani da manyan kayan aiki da abubuwan da za'a iya sake sarrafa su da sake amfani da su. Wannan yana rage sharar gida kuma yana kare muhalli. Zubar da marufi a cikin yanayin muhalli ta hanyar amfani da tsarin tarin da aka kafa. Zubar da na'urar Wutar Lantarki Cire batura marasa dawwama da batura masu caji daga na'urar kuma jefar da su daban. An yi wa wannan samfurin lakabin daidai da umarnin EU Waste Electrical and Electronic Equipment Directive (WEEE). Kada a zubar da wannan samfurin a cikin sharar gida na yau da kullun.

A matsayinka na mabukaci, ana buƙatar ka ɗauki na'urorin ƙarshen rayuwa zuwa wurin da aka keɓe don zubar da kayan wuta da lantarki, don tabbatar da zubar da muhallin da ya dace. Sabis ɗin dawowa kyauta ne. Kula da ƙa'idodi na yanzu a wurin! Zubar da batura Dole ne a taɓa zubar da batura da batura masu caji da sharar gida. Suna dauke da abubuwa masu gurbata muhalli irin su karafa masu nauyi, wadanda za su iya cutar da muhalli da lafiyar dan Adam idan aka zubar da su ba daidai ba, da kuma kayan danye masu daraja irin su iron, zinc, manganese ko nickel wadanda za a iya kwato su daga sharar gida.

A matsayinka na mabukaci, bisa doka ya wajaba ka ba da batura da aka yi amfani da su da batura masu caji don zubar da muhalli a dillalai ko wuraren tarawa masu dacewa daidai da dokokin ƙasa ko na gida. Sabis ɗin dawowa kyauta ne. Kuna iya samun adiresoshin wuraren tattarawa masu dacewa daga majalisar birni ko karamar hukuma. Sunayen ƙarfe masu nauyi da ke ƙunshe sune: Cd = cadmium, Hg = mercury, Pb = gubar. Rage samar da sharar gida daga batura ta amfani da batura masu tsayin rayuwa ko batura masu caji masu dacewa. Ka guje wa sharar gida kuma kar a bar baturi ko na'urorin lantarki da na lantarki masu ɗauke da baturi suna kwance a cikin rashin kulawa. Tarin daban da sake yin amfani da batura da batura masu caji suna yin

GARGADI! Lalacewa ga muhalli da lafiya ta hanyar zubar da batir ba daidai ba!

Alama

EN 12830, EN 13485 dacewa don ajiya (S) da sufuri (T) don ajiyar abinci da rarrabawa (C), Daidaitaccen rarrabawa 1 (-30.. + 70 ° C), bisa ga EN 13486 muna ba da shawarar sake fasalin sau ɗaya a shekara.

Adanawa da tsaftacewa

Ya kamata a adana shi a cikin zafin jiki. Don tsaftacewa, yi amfani da zane mai laushi kawai tare da ruwa ko barasa na likita. Kada a nutsar da wani ɓangare na ma'aunin zafi da sanyio

DOSTMANN lantarki GmbH Mess- und Steuertechnik Waldenbergweg 3b D-97877 Wertheim-Reicholzheim Jamus

• Waya: +49 (0) 93 42 / 3 08 90
• Imel: info@dostmann-electronic.de
• Intanet: www.dostmann-electronic.de

Canje-canje na fasaha, duk wani kurakurai da ɓarna da aka tanada An haramta Haifuwa gaba ɗaya ko bangare Stand04 2305CHB © DOSTMANN electronic GmbH

Takardu / Albarkatu

DOSTMANN LOG40 Data Logger don Zazzabi da Sensor na waje [pdf] Jagoran Jagora Logger Data Logger don Zazzabi da Sensor na waje, LOG40, Logger Data don Zazzabi da na'ura mai ba da hanya tsakanin hanyoyin sadarwa

Magana

• Manual mai amfani