I-Series Programmable Logic Controller
Imaniwali yosebenzisayo

I-IVC3 Series Isilawuli Sengqondo Ehlelekayo

Into	Inhloso ejwayelekile IVC3
Amandla ohlelo	64kz
Okokufaka kwesivinini esikhulu	200 kHz
Okukhiphayo ngesivinini esikhulu	200 kHz
Amandla-wenataginkumbulo	64, XNUMX kb
CAN	Iphrothokholi ye-CANopen DS301 (master) isekela ubuningi beziteshi ezingu-31, 64 TxPDOs, kanye nama-RxPDO angu-64. Iphrothokholi ye-CANopen DS301 (isigqila) isekela ama-TxPDO angu-4 kanye nama-RxPDO angu-4. Isinqamuleli setheminali: Sifakwe isilungiselelo senombolo yesiteshi se-DIP esakhelwe ngaphakathi: Sethwa ngokusebenzisa inkinobho ye-DIP noma uhlelo.
I-Modbus TCP	Iziteshi ezisekelayo nezigqila Ukulungiselelwa kwekheli le-IP: Kusethwa ngokusebenzisa iswishi ye-DIP noma uhlelo
Ukuxhumana kwe-serial	Imodi yokuxhumana: R8485 Ubukhulu. izinga le-baud le-PORT1 ne-PORT2: 115200 I-Terminal resistor: Ifakwe inkinobho ye-DIP eyakhelwe ngaphakathi
Ukuxhumana kwe-USB	Okujwayelekile: Isivinini esigcwele se-USB2.0 kanye nesixhumi esibonakalayo se-MiniB Umsebenzi: Ukulayisha nokulanda uhlelo, ukuqapha, kanye nokuthuthukiswa kwamasistimu angaphansi
Ukuhunyushwa	Ama-axis amabili emigqa kanye ne-arc interpolation (esekelwa isofthiwe yebhodi ye-V2.0 noma kamuva)
Ikhamera ye-elekthronikhi	Isekelwa isofthiwe yebhodi ye-V2.0 noma kamuva
Isandiso esikhethekile imojula	Ubukhulu. isamba senani lamamojula okunweba akhethekile: 8

Isikhungo senkonzo yamakhasimende
Inkampani Shenzhen INVT Electric Co., Ltd.

Ishidi lempendulo yekhwalithi yomkhiqizo

Igama lomsebenzisi		Ucingo
Ikheli lomsebenzisi		I-Postal Code
Igama lomkhiqizo nemodeli		Idethi yokufakwa
Umshini No.
Ukubukeka komkhiqizo noma isakhiwo
Ukusebenza komkhiqizo
Iphakethe lomkhiqizo
Izinto zomkhiqizo
Ikhwalithi esetshenziswayo
Thuthukisa imibono noma iziphakamiso

Ikheli: INVT Guangming Technology Building, Songbai Road, Matian,
Isifunda sase-Guangming, e-Shenzhen, e-China _ Ucingo: +86 23535967

Isingeniso somkhiqizo

Incazelo yemodeli
Umfanekiso 1-1 uchaza imodeli yomkhiqizo.

1.2 Ukubukeka nesakhiwo
Umfanekiso 1-2 ukhombisa ukubukeka nokwakheka kwe-IVC3 series module main (esebenzisa i-IVC3-1616MAT njenge-example).

Isokhethi yebhasi isetshenziselwa ukuxhuma amamojula esandiso. Iswishi yokukhetha imodi inikeza izinketho ezintathu: VULIWE, TM, futhi VALIWE.
1.3 Isingeniso setheminali
Izibalo ezilandelayo zibonisa ukuhlelwa kwetheminali ye-IVC3-1616MAT.
Amatheminali okokufaka:

Amatheminali okukhiphayo:

Ukucaciswa kokunikezwa kwamandla

Ithebula 2-1 lichaza imininingwane yokunikezwa kwamandla okwakhelwe ngaphakathi kwemojuli eyinhloko kanye nalawo amandla imojula eyinhloko engawanikeza kumamojula wokunweba.
Ithebula 2-1 Ukucaciswa kokunikezwa kwamandla

Into		Iyunithi	Okuncane. inani	Okujwayelekile inani	Ubukhulu. inani	Ukuphawula
Okokufaka ivoltagibanga		V AC	85	220	264	Voltage ububanzi bokuqalisa nokusebenza okufanele
Okokufaka kwamanje		A	/	/	2.	90 V okokufaka kwe-AC, okukhiphayo okugcwele
Ikalwe okukhiphayo okwamanje	5V/GND	mA	/	1000	/	Umthamo uyisamba sokusetshenziswa kwangaphakathi kwemojuli eyinhloko kanye nomthwalo wamamojula wokunweba. Amandla aphezulu okukhipha isamba somthwalo ogcwele wawo wonke amamojula, okungukuthi, 35 W. Imodi yokupholisa yemvelo iyamukelwa kumojula.
	24V/GND	mA	/	650	/
	24V/COM	mA	/	600	/

Izici zedijithali/zokukhiphayo

3.1 Izici zokufaka kanye nokucaciswa kwesiginali
Ithebula 3-1 lichaza izici zokufakwayo kanye nokucaciswa kwesignali.
Ithebula 3-1 Izici zokufaka kanye nokucaciswa kwesignali

Into		Okokufaka kwesivinini esikhulu amatheminali XO kuya ku-X7	Itheminali yokufaka evamile
Imodi yokufaka isignali		Uhlobo lomthombo noma imodi yohlobo lukasinki. Ungakhetha imodi ngokusebenzisa itheminali "S/S".
Ezogesi ipharamethi rs	Ukutholwa ivolumutage	24V DC
	Okokufaka	1 kf)	awu 5.7k0
	Okokufaka kuvuliwe	Ukumelana kwesekethe yangaphandle kungaphansi kuka-400 0.	Ukumelana kwesekethe yangaphandle kungaphansi kuka-400 0.
	Okokufaka kucishiwe	Ukumelana kwesifunda sangaphandle kuphakeme kune-24 ka	Ukumelana kwesekethe yangaphandle kungaphezulu kuka-24 kf2.
Ukuhlunga umsebenzi	Idijithali ukuhlunga	X0—X7: Isikhathi sokuhlunga singasethwa ngohlelo, futhi ububanzi obuvumelekile bungu-0 kuya ku-60 ms.
	Izingxenyekazi zekhompuyutha ukuhlunga	Ukuhlunga kwezingxenyekazi zekhompyutha kwamukelwa ezimbobeni ngaphandle kwe-XO ukuya ku-X7, futhi isikhathi sokuhlunga sicishe sibe ngu-10 ms.
Umsebenzi wejubane eliphezulu		Izimbobo ze-XO ukuya ku-X7 zingasebenzisa imisebenzi eminingi ehlanganisa ukubala ngesivinini esiphezulu, ukuphazamisa, nokuthwebula ukushaya kwenhliziyo. Imvamisa yomsindo omkhulu we-XO ukuya ku-X7 ngu-200 kHz.

Imvamisa enkulu yembobo yokufaka enesivinini esiphezulu ikhawulelwe. Uma ifrikhwensi yokufaka idlula umkhawulo, ukubala kungase kungalungile noma isistimu yehluleke ukusebenza kahle. Udinga ukukhetha inzwa yangaphandle efanele.
I-PLC inikeza imbobo "S/S" yokukhetha imodi yokufaka isignali. Ungakhetha uhlobo lomthombo noma imodi yohlobo lukasinki. Ukuxhuma okuthi “S/S” kokuthi “+24V” kubonisa ukuthi ukhetha imodi yokufaka yohlobo lukasinki, bese kuxhunywa inzwa yohlobo lwe-NPN. Uma i-“S/S” ingaxhumekile ku-“+24V”, ibonisa ukuthi imodi yokufaka yohlobo lomthombo ikhethiwe. Bheka Umfanekiso 3-1 kanye noMfanekiso 3-2.

Umfanekiso 3-1 Umdwebo wokufaka izintambo wohlobo lomthombo

Umfanekiso 3-2 Umdwebo wezintambo zokufakwayo kohlobo lukasinki

3.2 Izici zomphumela kanye nokucaciswa kwesiginali
Ithebula 3-2 lichaza imininingwane kagesi ephumayo.
Ithebula 3-2 Imininingwane kagesi ephumayo

Into	Ukucaciswa kokukhipha
Imodi yokukhipha	Okukhiphayo kwe-Transistor Okukhiphayo kuxhunywe uma isimo sokuphuma IVULIWE, futhi kuyanqanyulwa lapho isimo sokuphuma CIMILE.
Ukufakwa kwesifunda	I-Optocoupler insulation
Inkomba yesenzo	Inkomba ivuliwe uma i-optocoupler ishayelwa.
Ukunikezwa kwamandla wesekethe voltage	5-24V DC I-polarity ihlukaniswe.
Ukuvuza kwe-Open-circuit current	Ngaphansi kuka-0.1 mA/30 V DC

Into		Ukucaciswa kokukhipha
Okuncane. umthwalo		5 mA (5-24 V DC)
UMax. okukhipha okwamanje	Umthwalo ophikisayo	Isamba somthwalo wamatheminali avamile: Itheminali evamile yeqembu lephoyinti elingu-0.3 A/1 Itheminali evamile yeqembu le-0.8 N4-point Itheminali evamile yeqembu le-1.6 N8-point
	Umthwalo we-inductive	7.2 W/24 V DC
	Iwundlu lilayisha'	0.9 W/24 V DC
Isikhathi sokuphendula	OFF-00N	YO—Y7: 5.1 ps/phezulu kuno-10 mA Abanye: 50.5 ms/phezulu kuno-100mA
	KHANYISA CISHA
Imvamisa yokuphuma okukhulu		Y0—Y7: 200 kHz (ubukhulu)
Itheminali yokuphuma evamile		Itheminali eyodwa evamile ingabiwa ngamachweba angama-8, futhi wonke amatheminali ajwayelekile ahlukanisiwe. Ukuze uthole imininingwane mayelana namatheminali avamile amamodeli ahlukene, bheka uhlelo lwetheminali.
Ukuvikelwa kwe-fuse		Cha

1. I-transistor output circuit ifakwe ivolthi eyakhelwe ngaphakathitagithubhu ye-e-stabilizing ukuvimbela amandla e-counter-electromotive abangelwa lapho umthwalo we-inductive unqanyulwa. Uma umthamo womthwalo udlula imfuneko yokucaciswa, udinga ukwengeza i-freewheeling diode yangaphandle.
2. I-High-speed transistor okukhiphayo ifaka i-capacitance esabalalisiwe. Ngakho-ke, uma umshini usebenza ku-200 kHz, udinga ukuqinisekisa ukuthi okwamanje owenziwe mkhulu kuno-15 mA ukuze uthuthukise ijika le-characistc okukhiphayo, futhi idivayisi exhunywe kuyo ingaxhunyaniswa ne-resistor kwimodi efanayo ukuze kwandiswe umthamo wamanje. .

3.3 Izimo zokuxhuma okokufaka/okukhiphayo
Isibonelo sokuxhumanisa okokufaka
Umfanekiso 3-3 ubonisa uxhumano lwe-IVC3-1616MAT kanye ne-IVC-EH-O808ENR, okuyisibonelo sokuqalisa ukulawulwa kokuma okulula. Amasiginali okuma atholwe isifaki khodi angatholwa yi-XO kanye ne-X1 yokubala amatheminali anesivinini esiphezulu. Amasignali okushintsha indawo adinga ukusabela okusheshayo angaxhunywa kumatheminali anesivinini esikhulu X2 kuya ku-X7. Amanye amasiginali womsebenzisi angasatshalaliswa phakathi kwamatheminali okokufaka.

Isibonelo soxhumano lokukhiphayo
Umfanekiso 3-4 ubonisa uxhumano lwe-IVC3-1616MAT ne-IVC-EH-O808ENR. Amaqembu okukhiphayo angaxhunywa kuvolumu yesignali ehlukenetagama-e circuits, okungukuthi, amaqembu okukhiphayo angasebenza kumasekhethi evolumu ehlukenetage amakilasi. Angaxhunywa kuphela kumasekethe e-DC. Naka isiqondiso samanje uma uwaxhuma.

Umhlahlandlela wokuxhumana

4.1 Ukuxhumana kwe-serial
Imojula eyinhloko yochungechunge lwe-IVC3 ihlinzeka ngamachweba wokuxhumana we-serial amathathu asynchronous, okuyi-PORTO, PORT1, kanye ne-PORT2. Basekela amazinga e-baud angu-115200, 57600, 38400, 19200, 9600, 4800, 2400, no-1200 bps. I-PORTO yamukela izinga le-RS232 kanye nesokhethi le-Mini DIN8. Umfanekiso 4-1 uchaza incazelo yephinikhodi ye-PORTO.

Umfanekiso 4-1 Indawo yokushintshwa kwemodi yokukhetha kanye nencazelo yamaphinikhodi e-PORTO
Njengesixhumi esibonakalayo esikhethekile sohlelo lomsebenzisi, i-PORTO ingashintshwa ngenkani kuphrothokholi yembobo yokuhlela ngokusebenzisa inkinobho yokukhetha imodi. Ithebula 4-1 lichaza imephu phakathi kwezifunda ezisebenzayo ze-PLC kanye nezivumelwano ezisebenzayo ze-PORTO.
Ithebula 4-1 Ukumepha phakathi kwezifunda ezisebenzayo ze-PLC kanye namaphrothokholi asebenzayo we-PORTO

Isethingi yokushintsha ukukhetha imodi	Izwe	Iphrothokholi esebenzayo ye-PORTO
ON	Ukugijima	Kuya ngohlelo lomsebenzisi kanye nokucushwa kwesistimu yalo. Kungaba imbobo yokuhlela, i-Modbus, i-free-port, noma iphrothokholi yenethiwekhi ye-N:N.
TM (ON→TM)	Ukugijima	Ushintshele kuphrothokholi yembobo yokuhlela.
TM (OFF→TM)	Imile
VALIWE	Imile	Uma iphrothokholi ye-free-port isetshenziswa ekucushweni kwesistimu yohlelo lomsebenzisi, i-PORTO ishintshelwa ngokuzenzakalelayo kuphrothokholi yembobo yokuhlela ngemva kokumiswa kwe-PLC. Uma kungenjalo, iphrothokholi esethwe kusistimu ayishintshwa.

4.2 RS485 ukuxhumana
Kokubili i-PORT1 kanye ne-PORT2 yizimbobo ze-RS485 ezingaxhunywa kumadivayisi anemisebenzi yokuxhumana, njengama-inverter noma ama-HMI. Lezi zimbobo zingasetshenziswa ukulawula amadivayisi amaningi kumodi yokuxhumana nge-Modbus, N:N, noma iphrothokholi yembobo yamahhala. Zingamatheminali aboshwe ngezikulufo. Ungenza izintambo zesignali yokuxhumana uwedwa. Kunconywa ukuthi usebenzise amapheya asontekile avikelekile (ama-STP) ukuze uxhume izimbobo.

Ithebula 4-2 RS485 izici zokuxhumana

	Into	Isici
RS485 ukuxhumana	Imbobo yokuxhumana	2
	Imodi yesokhethi	I-PORT1, PORT2
	Isilinganiso se-Baud	115200, 57600, 38400, 19200, 9600, 4800, 2400, 1200bps
	Izinga lesiginali	I-RS485, i-half duplex, ukungahlukanisi
	Iphrothokholi esekelwe	Iphrothokholi yesiteshi se-Modbus master/slave, umthetho olandelwayo wokuxhumana kwamahhala, umthetho olandelwayo we-N:N
	Isithasiselo setheminali	Ifakwe iswishi ye-DIP eyakhelwe ngaphakathi

4.3 Ukuxhumana kwe-CANopen
Ithebula 4-3 izici zokuxhumana ze-CAN

Into	Isici
Iphrothokholi	Iphrothokholi ejwayelekile ye-CANopen DS301v4.02 engasetshenziselwa iziteshi eziyinhloko nezigqila, isekela isevisi ye-NMT, Iphrothokholi Yokulawula Amaphutha, Iphrothokholi ye-SDO, I-SYNC, Isimo Esiphuthumayo, ne-EDS file ukumisa
Isiteshi esikhulu	Isekela ama-TxPDO angu-64, ama-RxPDO angu-64, kanye neziteshi eziphezulu ezingu-31. Indawo yokushintshisana ngedatha (ingxenye engu-D) iyalungiseka.
Isiteshi sezigqila	Isekela ama-TxPDO angu-4 kanye nama-RxPDO angu-4 Indawo yokushintshanisa idatha: SD500—SD531
Imodi yesokhethi	Itheminali exhumekayo engu-3.81 mm

Isithasiselo setheminali		Ifakwe iswishi ye-DIP eyakhelwe ngaphakathi
Ukulungiselelwa kwesiteshi	Cha.	Setha kumabhithi 1 kuye ku-6 weswishi ye-DIP noma ngohlelo
Isilinganiso se-Baud		Setha kumabhithi 7 kuye ku-8 weswishi ye-DIP noma ngohlelo

Sebenzisa ama-STP wokuxhumana kwe-CAN. Uma amadivaysi amaningi ebandakanyeka ekuxhumaneni, qinisekisa ukuthi amatheminali e-GND awo wonke amadivaysi axhunyiwe futhi izinqamuleli zetheminali zisethelwe KUVULIWE.
4.4 Ukuxhumana kwe-Ethernet

Ithebula 4-4 izici zokuxhumana ze-Ethernet

	Into	Isici
I-Ethernet	Iphrothokholi	Isekela i-Modbus TCP kanye namaphrothokholi echweba lokuhlela
	Ukulungiselelwa kwekheli le-IP	Ingxenye yokugcina yekheli lasesizindeni se-inthanethi ingasethwa ngokushintsha kwe-DIP noma ngekhompyutha ephezulu
	Ukuxhumana kwesiteshi sezigqila	Iziteshi zezigqila ezingaphezu kwezingu-16 zingaxhunywa ngesikhathi esisodwa.
	Uxhumano lwesiteshi esikhulu	Iziteshi eziphezulu ezingu-4 ezingaxhunywa ngesikhathi esisodwa.
	Imodi yesokhethi	RJ45
	Umsebenzi	Ukulayisha/ukulanda kohlelo, ukuqapha, nokuthuthukiswa kohlelo lomsebenzisi
	Ikheli le-IP elizenzakalelayo	192.168.1.10
	Ikheli le-MAC	Setha efekthri. Bona i-SD565 kuya ku-SD570.

Ukufakwa

Ama-IVC3 Series PLC asebenza kuzimo ezinendawo yokufaka ye-Il ejwayelekile nezinga lokungcola elingu-2.
5.1 Ubukhulu nokucaciswa
Ithebula 5-1 lichaza ubukhulu kanye nokucaciswa kwamamojula amakhulu ochungechunge lwe-IVC3.
Ithebula 5-1 Ubukhulu kanye nokucaciswa

Imodeli	Ububanzi	Ukujula	Ubude	Isisindo sengqikithi
I-IVC3-1616MAT	167 mm	90 mm	90 mm	740 g
I-IVC3-1616MAR

5.2 Izindlela zokufaka
Ukusebenzisa izikhala ze-DIN
Ngokuvamile, ama-PLC afakwa kusetshenziswa izikhala ze-DIN ezinobubanzi obungu-35 mm, njengoba kuboniswe kuMfanekiso 5-1.

Izinyathelo zokufaka eziqondile zimi kanje:

1. Lungisa i-DIN slot ngokuvundlile ku-backplate yokufaka.
2. Khipha i-DIN slot clampukubopha ibhande kusukela phansi kwemojuli.
3. Faka imojula ku-DIN slot.
4. Cindezela i-clampbopha ibhande emuva lapho belikhona ukukhiya ukulungisa imojuli.
5. Sebenzisa izivalo ze-DIN slot ukuze ulungise iziphetho ezimbili zemojuli, uyivimbele ukuthi ingasheleli.

Lezi zinyathelo zingasetshenziswa futhi ukufaka amanye ama-PLC ochungechunge lwe-IVC3 ngokusebenzisa izikhala ze-DIN.
Ukusebenzisa izikulufo
Ezimeni lapho umthelela omkhulu ungase ube khona, ungafaka ama-PLC ngokusebenzisa izikulufu. Faka izikulufu zokubopha (M3) embotsheni yezikulufu ezimbili endlini ye-PLC futhi uzilungise ku-backplate yekhabethe likagesi, njengoba kuboniswe kuMfanekiso 5-2.

5.3 Ukuxhumeka kwekhebula kanye nemininingwane
Ikhebula lamandla noxhumo lwekhebula yaphansi
Umfanekiso 5-3 ubonisa uxhumano lwe-AC kanye nezinsiza zamandla ezisizayo.

Amandla okugxambukela kwe-anti-electromagnetic ama-PLCs angathuthukiswa ngokumisa amakhebuli aphansi athembekile. Lapho ufaka i-PLC, xhuma itheminali yokuphakela amandla phansi. Kunconywa ukuthi usebenzise izintambo zokuxhuma ze-AWG12 ukuya ku-AWG16 bese uzama ukufinyeza izintambo, nokuthi ulungise isisekelo esizimele futhi ugcine izintambo eziphansi zikude nalezo zamanye amadivaysi (ikakhulukazi lawo akhiqiza ukuphazamiseka okuqinile), njengoba kuboniswe kuMfanekiso 5- 4.

Ukucaciswa kwekhebula
Ukuze kufakwe izintambo ze-PLC, kunconywa ukuthi usebenzise izintambo zethusi ezinemicu eminingi futhi ulungise amatheminali avalelwe ukuze uqinisekise ikhwalithi yezintambo. Ithebula 5-2 lichaza izindawo ezinconyiwe zezintambo eziphambanayo namamodeli.

Ithebula 5-2 Izindawo ezinconyiwe eziphambanayo namamodeli

Ikhebula	Indawo ye-Coss-sectional yocingo	Imodeli yocingo enconyiwe	Amatheminali ezintambo ahambisanayo kanye namashubhu ashwabenekayo
Amandla e-AC, N) ikhebula (L	1 .0-2.0mm2	AWG12, 18	Itheminali efana neshubhu efakwe ngaphambili engu-H1.5/14, noma itheminali yekhebula evalwe ngothayela eshisayo
Intambo yesisekelo	2•Omm2	AWG12	Itheminali efana neshubhu efakwe ngaphambili engu-H2.0/14, noma itheminali yekhebula evalwe ngothayela eshisayo
Isignali yokokufaka ikhebuli (X)	0.8-1.0mm2	AWG18, 20	I-UT1-3 noma i-OT1-3 ecindezelwa ngokubanda, i-03 noma (ishubhu le-D4 elishwabana ukushisa
Ikhebuli yesignali yokuphumayo (Y)	0.8-1.0mm2	AWG18, 20

Lungisa amatheminali ekhebula acutshunguliwe kumatheminali ezintambo e-PLC ngokusebenzisa izikulufu. Naka izikhundla zezikulufi. I-torque eqinisayo yezikulufu ingu-0.5 kuya ku-0.8 Nm, engasetshenziswa ukuqedela uxhumano oluthembekile ngaphandle kokulimaza izikulufu.
Umfanekiso 5-5 ubonisa imodi yokulungiselela ikhebula enconyiwe.

Ukufudumala
Ungaxhumi okukhiphayo kwe-transistor kumasekhethi e-AC, njengesekhethi engu-220 V AC. Landela ngokuqinile amapharamitha kagesi ukuklama amasekhethi okukhiphayo. Qinisekisa ukuthi akukho overvolvetagi-e noma i-overcurrent ivela.

Ukukhanyisa, ukusebenza, nokugcinwa kwenjwayelo

6.1 Ukuvula nokusebenza
Ngemuva kokuthi izintambo seziqediwe, hlola konke ukuxhumana. Qinisekisa ukuthi azikho izindaba zangaphandle ezehlile ngaphakathi kwezindlu futhi ukuchithwa kokushisa kusesimweni esihle.

1. Amandla ku-PLC.
   Inkomba ye-POWER ye-PLC ivuliwe.
2. Qala isofthiwe ye-Auto Station ku-PC bese ulanda uhlelo lomsebenzisi oluhlanganisiwe ku-PLC.
3. Ngemuva kokuthi uhlelo seludawunilodelwe futhi luqinisekisiwe, setha iswishi yokukhetha imodi ukuthi IVULIWE.
   Inkomba ye-RUN ivuliwe. Uma inkomba ye-ERR ivuliwe, ibonisa ukuthi amaphutha ayenzeka kuhlelo lomsebenzisi noma ohlelweni. Kulokhu, lungisa amaphutha ngokubhekisela emiyalweni ku/VC Series Small-size PLC Programming Manual.
4. Amandla kusistimu yangaphandle ye-PLC ukuze enze ukuthunywa ohlelweni.

6.2 Ukunakekela okujwayelekile
Naka izici ezilandelayo lapho wenza ukunakekelwa okujwayelekile nokuhlola:

1. Qinisekisa ukuthi i-PLC isebenza endaweni ehlanzekile, ivimbela izinto zangaphandle noma uthuli ukuthi luwele emshinini.
2. Gcina i-PLC isesimweni esihle sokungena komoya kanye nezimo zokukhipha ukushisa.
3. Qinisekisa ukuthi izintambo zenziwe ngendlela efanele futhi zonke izintambo zocingo ziboshwe kahle.

Qaphela

1. Iwaranti ihlanganisa kuphela umshini we-PLC.
2. Isikhathi sewaranti yizinyanga eziyi-18. Sihlinzeka ngokulungiswa kwamahhala kanye nokulungisa umkhiqizo uma unephutha noma ulimele ngesikhathi sokusebenza okufanele phakathi nesikhathi sewaranti.
3. Isikhathi sewaranti siqala kusukela ngosuku lwangaphambili lwemboni yomkhiqizo.
   Umshini No. ukuphela kwesisekelo sokunquma ukuthi umshini ungaphakathi kwesikhathi sewaranti. Idivayisi engenawo inombolo yomshini ithathwa njengengaphandle kwewaranti.
4. Izimali zokunakekela nokulungisa zikhokhiswa kulezi zimo ezilandelayo ngisho nomkhiqizo ungaphakathi kwesikhathi sewaranti: Amaphutha enziwa ngenxa yokungasebenzi kahle. Imisebenzi ayenziwa ngokulandela imiyalelo enikezwe kumanuwali.
   Umshini wonakele ngenxa yezizathu ezinjengomlilo, izikhukhula, noma ivolumutage okuhlukile.
   Umshini wonakele ngenxa yokusetshenziswa ngendlela engafanele. Usebenzisa umshini ukwenza imisebenzi ethile engasekelwe.
5. Izinkokhelo zesevisi zibalwa ngokusekelwe ezinkokhelweni zangempela. Uma kunenkontileka, izinhlinzeko ezishiwo kunkontileka yizo ezikhona.
6. Gcina leli khadi lewaranti. Ikhombise iyunithi yesondlo uma ufuna izinsiza zokulungisa.
7. Xhumana nomthengisi wendawo noma uthinte inkampani yethu ngokuqondile uma unemibuzo.

Inkampani Shenzhen INVT Electric Co., Ltd.
Ikheli: INVT Guangming Technology Building, Songbai Road, Matian,
Isifunda saseGuangming, eShenzhen, China
Webindawo: www.invt.com
Wonke Amalungelo Agodliwe. Okuqukethwe kule dokhumenti kungashintsha ngaphandle
isaziso.

Amadokhumenti / Izinsiza

I-invt IVC3 Series Isilawuli Sengqondo Ehlelekayo [pdf] Imaniwali yosebenzisayo I-IVC3 Series, Programmable Logic Controller, IVC3 Series Programmable Logic Controller, Logic Controller, Controller

Izithenjwa

• Imaniwali yosebenzisayo