Series Programmable Logic Controller
Bukana ea Mosebelisi

IVC3 Series Programmable Logic Controller

Ntho	Sepheo se akaretsang sa IVC3
Bokhoni ba lenaneo	64 lik'hilograma
Ho kenya ka lebelo le phahameng	200 kHz
Phallo e phahameng ka ho fetisisa	200 kHz
Matla-utagmemori	64 kB
KA	Protocol (master) ea CANopen DS301 e ts'ehetsa liteishene tse fihlang ho tse 31, 64 TxPDOs, le 64 RxPDOs. Protocol ea CANopen DS301 (lekhoba) e ts'ehetsa 4 TxPDOs le 4 RxPDOs. Sehanyetsi sa terminal: E na le tlhophiso ea nomoro ea Seteishene ea DIP e hahelletsoeng: E ​​behiloe ka ho sebelisa switch kapa lenaneo la DIP.
TCP ea Modbus	Ho tšehetsa liteishene tsa master le makhoba Tlhophiso ea aterese ea IP: E behiloe ka ho sebelisa switch kapa lenaneo la DIP
Puisano ka serial	Mokhoa oa puisano: R8485 Max. sekhahla sa baud sa PORT1 le PORT2: 115200 Terminal resistor: E na le sesebelisoa sa DIP se kentsoeng
Puisano ea USB	Maemo: USB2.0 Full Speed ​​le interface MiniB Mosebetsi: Ho kenya le ho jarolla lenaneo, ho lekola, le ho ntlafatsa lits'ebetso tsa mantlha.
Phetolelo	Tlhaloso ea li-axis tse peli le arc (e tšehetsoeng ke software ea boto V2.0 kapa hamorao)
Khamera ea elektronike	E tšehetsoa ke boto software V2.0 kapa hamorao
Katoloso e khethehileng mojule	Max. kakaretso ea li-module tsa katoloso e khethehileng: 8

Setsi sa litšebeletso tsa bareki
Shenzhen INVT Electric Co., Ltd.

Letlapa la maikutlo a boleng ba sehlahisoa

Lebitso la mosebedisi		Mohala
Aterese ea mosebelisi		Nomoro ea poso
Lebitso la lihlahisoa le mohlala		Letsatsi la ho kenya
Mochini No.
Ponahalo kapa sebopeho sa sehlahisoa
Ts'ebetso ea sehlahisoa
Sehlahisoa sephutheloana
Lisebelisoa tsa lihlahisoa
Boleng bo sebelisoang
Ntlafatso ea maikutlo kapa litlhahiso

Aterese: INVT Guangming Technology Building, Songbai Road, Matian,
Setereke sa Guangming, Shenzhen, China _ Tel: +86 23535967

Kenyelletso ea sehlahisoa

1.1 Tlhaloso ea mohlala
Setšoantšo sa 1-1 se hlalosa mohlala oa sehlahisoa.

1.2 Ponahalo le sebopeho
Setšoantšo sa 1-2 se bonts'a ponahalo le sebopeho sa module ea mantlha ea IVC3 (e sebelisa IVC3-1616MAT joalo ka ex.ample).

Sokete ea libese e sebelisoa ho hokahanya li-module tsa katoloso. Phetoho ea ho khetha mokhoa e fana ka likhetho tse tharo: ON, TM, le OFF.
1.3 Selelekela sa Terminal
Lipalo tse latelang li bonts'a tlhophiso ea terminal ea IVC3-1616MAT.
Lisebelisoa tsa ho kenya:

Litheminale tsa lihlahisoa:

Litlhaloso tsa phepelo ea motlakase

Letlapa la 2-1 le hlalosa litlhaloso tsa motlakase o hahiloeng ka har'a mochine o moholo le oa matla ao mochine o ka sehloohong o ka fanang ka oona ho li-module tsa katoloso.
Lethathamo la 2-1 Litlhaloso tsa phepelo ea motlakase

Ntho		Yuniti	Min. boleng	E tloaelehileng boleng	Max. boleng	Litlhaloso
Keletso voltage fapaneng		V AC	85	220	264	Moqtage fapaneng bakeng sa ho qala le ts'ebetso e nepahetseng
Kenya hona joale		A	/	/	2.	Kenyelletso ea 90 V AC, tlhahiso e felletseng
E lekanyelitsoe tlhahiso ea hona joale	5V/GND	mA	/	1000	/	Bokhoni ke kakaretso ea tšebeliso ea ka hare ea module e kholo le mojaro oa li-extension modules. Matla a phahameng a tlhahiso ke kakaretso ea mojaro o feletseng oa li-modules tsohle, ke hore, 35 W. Mokhoa oa ho pholile oa tlhaho o amoheloa bakeng sa module.
	24V/GND	mA	/	650	/
	24V/COM	mA	/	600	/

Litšobotsi tsa ho kenya / tlhahiso ea dijithale

3.1 Litšobotsi tsa ho kenya le litlhaloso tsa matšoao
Letlapa la 3-1 le hlalosa litšobotsi tsa ho kenya le litlhaloso tsa matšoao.
Lethathamo la 3-1 Litšobotsi tsa ho kenya le litlhaloso tsa matšoao

Ntho		Ho kenya ka lebelo le phahameng li-terminals tsa XO ho isa X7	Theminale e tloaelehileng ea ho kenya
Mokhoa oa ho kenya lets'oao		Mofuta oa mohloli kapa mofuta oa sink. U ka khetha mokhoa ka "S/S" terminal.
Motlakase paramete rs	Ho lemoha voltage	24V DC
	Kenyeletso	1 kf)	5.7 k0
	Kenyeletso bulela	The Khanyetso ea potoloho ea kantle e tlase ho feta 400 0.	Ho hanyetsa ha potoloho ea kantle ho tlase ho feta 400 0.
	Kenyeletso e koetsoe	Ho hanyetsa ha potoloho ea ka ntle ho phahame ho feta 24 ka	Khanyetso ea potoloho ea kantle e phahame ho feta 24 kf2.
Ho sefa tshebetso	Dijithale tlhotla	X0—X7: Nako ea ho sefa e ka hlophisoa ka lenaneo, 'me sebaka se amohelehang ke 0 ho isa ho 60 ms.
	Lisebelisoa tlhotla	Ho sefa lisebelisoa ho amoheloa bakeng sa likou ntle le XO ho X7, 'me nako ea ho sefa e ka ba 10 ms.
Mosebetsi oa lebelo le phahameng		Boema-kepe ba XO ho isa ho X7 bo ka kenya tšebetsong mesebetsi e mengata e kenyelletsang ho bala ka lebelo le holimo, ho sitisa, le ho ts'oaroa ha sekhahla. Maqhubu a phahameng ka ho fetesisa a XO ho X7 ke 200 kHz.

Maqhubu a mangata a koung ea ho kenya ka lebelo le phahameng a lekanyelitsoe. Haeba maqhubu a kentsweng a feta tekanyo, palo e kanna ya fosahala kapa sistimi e hloleha ho sebetsa hantle. U hloka ho khetha sensor e nepahetseng ea kantle.
PLC e fana ka kou ea "S/S" bakeng sa ho khetha mokhoa oa ho kenya lets'oao. U ka khetha mofuta oa mohloli kapa mofuta oa sink. Ho hokela "S/S" ho "+24V" ho bontša hore u khetha mokhoa oa ho kenya mofuta oa sink, ebe ho ka hokeloa sensor ea mofuta oa NPN. Haeba "S/S" e sa hokahane le "+24V", e bontša hore ho khethiloe mokhoa oa ho kenya mofuta oa mohloli. Sheba setšoantšo sa 3-1 le setšoantšo sa 3-2.

Setšoantšo sa 3-1 Sets'oants'o sa terata ea ho kenya mofuta oa mohloli

Setšoantšo sa 3-2 Setšoantšo sa terata sa mofuta oa sink

3.2 Litšobotsi tsa sephetho le litlhaloso tsa matšoao
Letlapa la 3-2 le hlalosa lintlha tsa motlakase tse hlahisoang.
Lethathamo la 3-2 Litlhaloso tsa motlakase tse hlahisoang

Ntho	Khumo ga tlhaloso
Mokhoa oa ho tsoa	Sephetho sa Transistor Sehlahisoa se hokahane ha boemo ba tlhahiso bo ON, 'me sea khaoha ha boemo ba tlhahiso bo TIMA.
Sekoahelo sa potoloho	Optocoupler insulation
Pontšo ea ketso	Letšoao le teng ha optocoupler e khannoa.
Phepelo ea motlakase oa potoloho voltage	5-24V DC Li-polarity li fapane.
Open-circuit leakage current	Ka tlase ho 0.1 mA/30 V DC

Ntho		Khumo ga tlhaloso
Min. morwalo		5 mA (5-24 V DC)
Boholo. tlhahiso jwale	Mojaro o hanyetsanang	Kakaretso ea li-terminals tse tloaelehileng: Terminal e tloaelehileng ea sehlopha sa 0.3 A/1-point Terminal e tloaelehileng ea sehlopha sa 0.8 N4-point Terminal e tloaelehileng ea sehlopha sa 1.6 N8-point
	Moroalo o matla	7.2 W/24 V DC
	Konyana mojaro'	0.9 W/24 V DC
Nako ea ho arabela	OFF-00N	YO—Y7: 5.1 ps/kahodimo ho 10 mA Tse ding: 50.5 ms/ho feta 100mA
	ON—) TLHOKOMELA
Maqhubu a phahameng a tlhahiso		Y0—Y7: 200 kHz (boholo)
Terminal e tloaelehileng ea tlhahiso		Sebaka se le seng se tloaelehileng se ka arolelanoa ka boholo ba likou tse 8, 'me li-terminals tsohle tse tloaelehileng li arotsoe ho tse ling. Bakeng sa lintlha tse mabapi le li-terminals tse tloaelehileng tsa mefuta e fapaneng, bona tlhophiso ea terminal.
Tšireletso ea fuse		Che

1. Potoloho ea transistor e na le mokelikeli o kentsoengtage-stabilizing tube ho thibela matla a counter-electromotive a bakoang ha mojaro oa inductive o khaotsoe. Haeba boima ba mojaro bo feta tlhokahalo e boletsoeng, o hloka ho eketsa diode ea kantle ea freewheeling.
2. Phallo e phahameng ea lebelo la transistor e kenyelletsa bokhoni bo ajoang. Ka hona, haeba mochine o sebetsa ho 200 kHz, o lokela ho etsa bonnete ba hore motlakase o tsamaisoang o moholo ho feta 15 mA ho ntlafatsa phallo ea sebopeho sa curve, 'me sesebelisoa se hokahaneng le sona se ka hokahanngoa le mohanyetsi ka mokhoa o tšoanang ho eketsa mojaro oa hona joale. .

3.3 Maemo a khokahanyo ea lintho tse kenang le tse hlahisoang
Mohlala oa ho kenya
Setšoantšo sa 3-3 se bonts'a khokahanyo ea IVC3-1616MAT le IVC-EH-O808ENR, e leng mohlala oa ho kenya ts'ebetsong taolo e bonolo ea boemo. Lipontšo tsa boemo tse fumanoeng ke encoder li ka bonoa ke li-terminals tsa ho bala tsa XO le X1 tsa lebelo le phahameng. Matshwao a switjha boemo a hlokang karabelo e potlakileng a ka hokelwa ho diterminals tsa lebelo le phahameng X2 ho X7. Lipontšo tse ling tsa basebelisi li ka ajoa har'a li-terminals tsa ho kenya.

Mohlala oa khokahano ea sephetho
Setšoantšo sa 3-4 se bontša khokahanyo ea IVC3-1616MAT le IVC-EH-O808ENR. Lihlopha tse hlahisoang li ka kopanngoa le li-voltage tse fapanengtagli-circuits, ke hore, lihlopha tse hlahisoang li ka sebetsa ka lipotoloho tse fapaneng tsa voltage lihlopha. Li ka hokahanngoa feela le li-circuits tsa DC. Ela hloko tataiso ea hona joale ha u li kopanya.

Tataiso ea puisano

4.1 Puisano ea serial
Mojule oa mantlha oa IVC3 o fana ka likou tse tharo tsa puisano tsa serial, e leng PORTO, PORT1, le PORT2. Ba tšehetsa litekanyetso tsa baud tsa 115200, 57600, 38400, 19200, 9600, 4800, 2400, le 1200 bps. PORTO e amohela boemo ba RS232 le sokete ea Mini DIN8. Setšoantšo sa 4-1 se hlalosa tlhaloso ea pin ea PORTO.

Setšoantšo sa 4-1 Boemo ba ho fetola mokhoa oa ho khetha le tlhaloso ea lipini tsa PORTO
Joalo ka sehokelo se ikhethileng bakeng sa mananeo a basebelisi, PORTO e ka fetisetsoa ho protocol ea porting port ka sesebelisoa sa khetho ea mode. Letlapa la 4-1 le hlalosa 'mapa lipakeng tsa linaha tse sebetsang tsa PLC le liprothokholo tse sebetsang tsa PORTO.
Lethathamo la 4-1 'mapa lipakeng tsa PLC le liprothokholo tse sebetsang tsa PORTO

Tlhophiso ea ho khetha mokhoa	Naha	PORTO e tsamaisang protocol
ON	Ho matha	E itšetlehile ka lenaneo la mosebedisi le tsamaiso ea eona ea tsamaiso. E ka ba boema-kepe ba mananeo, Modbus, free-port, kapa N:N network protocol.
TM (ON→ TM)	Ho matha	E fetiselitsoe ho protocol ea boema-kepe ba mananeo.
TM (OFF→ TM)	E emisitsoe
TLOA	E emisitsoe	Haeba protocol ea mahala-port e sebelisoa tlhophisong ea sistimi ea mosebelisi, PORTO e fetoloa ka bo eona ho protocol ea porting port kamora hore PLC e emisoe. Ho seng joalo, protocol e behiloeng tsamaisong ha e fetohe.

4.2 RS485 puisano
Ka bobeli PORT1 le PORT2 ke likou tsa RS485 tse ka hokahanngoang le lisebelisoa tse nang le mesebetsi ea puisano, joalo ka li-inverters kapa li-HMI. Likou tsena li ka sebelisoa ho laola lisebelisoa tse ngata ka mokhoa oa marang-rang ka Modbus, N: N, kapa protocol ea mahala-port. Ke li-terminals tse tlanngoeng ka li-screw. U ka iketsetsa likhoele tsa mats'oao a puisano u le mong. Ho khothalletsoa hore u sebelise lipara tse sothehileng tse sirelelitsoeng (STPs) ho hokahanya likou.

Lethathamo la 4-2 RS485 litšobotsi tsa puisano

	Ntho	Sebopeho
RS485 puisano	Boema-kepe ba puisano	2
	Socket mode	PORT1, PORT2
	Sekhahla sa Baud	115200, 57600, 38400, 19200, 9600, 4800, 2400, 1200bps
	Boemo ba lipontšo	RS485, halofo ea duplex, e seng ho itšehla thajana
	Protocol e tšehelitsoeng	Protocol ea seteishene sa Modbus master/slave, protocol ea mahala ea puisano, N:N protocol
	Sehanyetsi sa terminal	E na le switjha ea DIP e hahelletsoeng kahare

4.3 Puisano ea CANopen
Lethathamo la 4-3 Litšobotsi tsa puisano tsa CAN

Ntho	Sebopeho
Protocol	Protocol e tloaelehileng ea CANopen DS301v4.02 e ka sebelisoang bakeng sa liteishene tse kholo le tsa makhoba, tse tšehetsang tšebeletso ea NMT, Protocol Control Control, SDO protocol, SYNC, Emergency, le EDS file tlhophiso
Seteishene sa Master	E ts'ehetsa 64 TxPDOs, 64 RxPDOs, le boholo ba liteishene tse 31. Sebaka sa phapanyetsano ea data (karolo ea D) se ka lokisoa.
Seteishene sa makhoba	E ts'ehetsa 4 TxPDOs le 4 RxPDOs Sebaka sa phapanyetsano ea data: SD500—SD531
Socket mode	Theminale ea plugable ea 3.81 mm

Sehanyetsi sa terminal		E na le switjha ea DIP e hahelletsoeng kahare
Boemo ba seteishene	Che.	Beha likotoana tsa 1 ho isa ho tse 6 tsa switch ea DIP kapa ka lenaneo
Sekhahla sa Baud		Beha likotoana tsa 7 ho isa ho tse 8 tsa switch ea DIP kapa ka lenaneo

Sebelisa li-STP bakeng sa puisano ea CAN. Haeba lisebelisoa tse ngata li ameha puisanong, etsa bonnete ba hore li-terminals tsa GND tsa lisebelisoa tsohle li hokahane 'me li-resistance tsa terminal li behiloe HO ON.
4.4 Khokahano ea Ethernet

Lethathamo la 4-4 Litšobotsi tsa puisano tsa Ethernet

	Ntho	Sebopeho
Ethernet	Protocol	E ts'ehetsa Modbus TCP le li-protocol tsa porting port
	Litlhophiso tsa aterese ea IP	Karolo ea ho qetela ea aterese ea IP e ka hlophisoa ka sesebelisoa sa DIP kapa komporo e holimo
	Khokahano ea seteishene sa makhoba	Boholo ba liteishene tsa makhoba tse 16 li ka hokahanngoa ka nako e le 'ngoe.
	Khokahano ea seteishene se seholo	Ho ka hoketsoa liteishene tse kholo tse 4 ka nako e le 'ngoe.
	Socket mode	RJ45
	Mosebetsi	Ho kenya / ho jarolla, ho beha leihlo, le ho ntlafatsa lenaneo la basebelisi
	Aterese ea IP ea kamehla	192.168.1.10
	Aterese ea MAC	Beha fekthering. Sheba SD565 ho SD570.

Ho kenya

IVC3 Series PLCs e sebetsa maemong a nang le maemo a ho kengoa a Il e tloaelehileng le boemo ba tšilafalo ea 2.
5.1 Litekanyo le litlhaloso
Lethathamo la 5-1 le hlalosa litekanyo le litlhaloso tsa li-module tsa sehlooho tsa IVC3.
Lethathamo la 5-1 Litekanyo le litlhaloso

Mohlala	Bophara	Botebo	Bophahamo	Boima bo kahare
IVC3-1616MAT	167 limilimithara	90 limilimithara	90 limilimithara	740 g
IVC3-1616MAR

5.2 Mekhoa ea ho kenya
Ho sebelisa li-slots tsa DIN
Ka kakaretso, li-PLC li kenngoa ka ho sebelisa li-slots tsa DIN ka bophara ba 35 mm, joalokaha ho bontšitsoe setšoantšong sa 5-1.

Mehato e khethehileng ea ho kenya ke e latelang:

1. Lokisa sekotjana sa DIN se otlolohile holim'a letlapa la ho instola.
2. Hula sekotjana sa DIN clampho kokota ho tloha tlase ho mojulu.
3. Kenya module ho slot ea DIN.
4. Tobetsa clamping buckle ho khutlela moo e neng e le ho notlela lokisa mojulung.
5. Sebelisa liepisi tsa sekotjana sa DIN ho lokisa lintlha tse peli tsa mojule, ho e thibela ho thella.

Mehato ena e ka boela ea sebelisoa ho kenya li-PLC tse ling tsa letoto la IVC3 ka ho sebelisa DIN slots.
Ho sebelisa lisepa
Bakeng sa maemo ao tšusumetso e kholo e ka bang teng, o ka kenya li-PLC ka ho sebelisa li-screw. Beha li-screws tse tiisang (M3) ka likoti tse peli tsa screw ho ntlo ea PLC 'me u li lokise holim'a mokokotlo oa khabinete ea motlakase, joalokaha ho bontšitsoe setšoantšong sa 5-2.

5.3 Khokelo ea thapo le litlhaloso
Khokahano ea thapo ea motlakase le thapo ea fatše
Setšoantšo sa 5-3 se bonts'a khokahanyo ea AC le lisebelisoa tsa motlakase tse thusang.

Bokhoni ba ho kena-kenana le anti-electromagnetic ba li-PLC bo ka ntlafatsoa ka ho lokisa likhoele tsa motheo tse tšepahalang. Ha o kenya PLC, hokela setsi sa phepelo ea motlakase fatshe. Ho kgothaletswa hore o sebedise mehala ya kgokelo ya AWG12 ho AWG16 mme o leke ho kgutsufatsa mehala, le hore o lokise motheo o ikemetseng mme o boloke dithapo tsa motheo di le hole le tsa disebediswa tse ding (haholo-holo tse hlahisang tšitiso e matla), jwalo ka ha ho bontshitswe ho Setšoantšo sa 5- 4.

Litlhaloso tsa cable
Bakeng sa likhoele tsa PLC, ho khothaletsoa hore u sebelise terata ea koporo e nang le likhoele tse ngata 'me u lokise liteishene tse sirelelitsoeng ho netefatsa boleng ba likhoele. Letlapa la 5-2 le hlalosa libaka le mehlala e khothalletsoang ea terata.

Lethathamo la 5-2 Likarolo tse khothalelitsoeng tse fapaneng le mehlala

Cable	Sebaka sa Coss-sectional sa terata	Moetso oa terata o khothalelitsoeng	Li-terminals tse tsamaisanang tsa likhoele le li-tubing tse honyehang mocheso
Matla a AC, N) thapo (L	1 .0-2.0mm2	AWG12, 18	H1.5/14 preinsulated tube-like terminal, kapa hot tin-coated cable terminal
Thapo e thehang	2•Omm2	AWG12	H2.0/14 preinsulated tube-like terminal, kapa hot tin-coated cable terminal
Lets'oao la ho kenya thapo (X)	0.8-1.0mm2	AWG18, 20	UT1-3 kapa OT1-3 terminal e hatelitsoeng ka serame, 03 kapa (li-tubing tsa D4 tse honyehang mocheso
Mohala oa lets'oao (Y)	0.8-1.0mm2	AWG18, 20

Lokisa liteishene tsa lithapo tse sebetsitsoeng holim'a liteishene tsa likhoele tsa PLC ka ho sebelisa li-screw. Ela hloko maemo a li-screws. Torque e tiisang li-screws ke 0.5 ho 0.8 Nm, e ka sebelisetsoang ho tlatsa khokahanyo e tšepahalang ntle le ho senya li-screws.
Setšoantšo sa 5-5 se bontša mokhoa o khothalletsoang oa ho lokisetsa cable.

Ho futhumala
Se ke oa hokela tlhahiso ea transistor ho li-circuits tsa AC, joalo ka potoloho ea 220 V AC. Latela ka tieo li-parameter tsa motlakase ho rala li-circuits tsa tlhahiso. Netefatsa hore ha ho na overvolvingtage kapa overcurrent e etsahala.

Ho bulela, ts'ebetso, le tlhokomelo ea kamehla

6.1 Ho bulela le ho sebetsa
Ka mor'a hore wiring e phethe, hlahloba likhokahano tsohle. Etsa bonnete ba hore ha ho na litaba tse tsoang linaheng tse ling tse theohileng ka hare ho matlo le ho senya mocheso ho maemong a matle.

1. Matla ho PLC.
   Letšoao la POWER la PLC le buletsoe.
2. Qala software ea Auto Station ho PC ebe u khoasolla lenaneo le hlophisitsoeng la mosebelisi ho PLC.
3. Kamora hore lenaneo le jarollotsoe le ho netefatsoa, ​​seta switch ea khetho ea mode ho ON.
   Letshwao la RUN le butswe. Haeba letšoao la ERR le ntse le le teng, le bontša hore liphoso li etsahala lenaneong la mosebedisi kapa tsamaiso. Tabeng ena, lokisa liphoso ka ho bua ka litaelo tse ho / VC Series Small-size PLC Programming Manual.
4. Matla ho sistimi ea kantle ea PLC ho etsa ts'ebetso ho sistimi.

6.2 Tlhokomelo ea kamehla
Ela hloko lintlha tse latelang ha u etsa tlhokomelo e tloaelehileng le tlhahlobo:

1. Netefatsa hore PLC e sebetsa tikolohong e hloekileng, e thibelang litaba tsa kantle ho naha kapa lerole ho oela mochining.
2. Boloka PLC e le maemong a matle a moea le a ho qhala mocheso.
3. Netefatsa hore lithapo li entsoe ka nepo le hore li-terminals kaofela li tlameletsoe hantle.

Hlokomela

1. Tiisetso e akaretsa feela mochini oa PLC.
2. Nako ea tiisetso ke _ 18 likhoeli. Re fana ka tlhokomelo e sa lefelloeng le ho lokisoa ha sehlahisoa haeba se fosahetse kapa se senyehile nakong ea ts'ebetso e nepahetseng nakong ea tiisetso.
3. Nako ea tiisetso e qala ho tloha ka letsatsi la khale la feme ea sehlahisoa.
   Mochine oa No. ke oona feela motheo oa ho etsa qeto ea hore na mochine o ka har'a nako ea tiisetso. Sesebelisoa se se nang mochini No. se nkuoa se se na tiisetso.
4. Litefiso tsa tlhokomelo le tokiso li lefisoa maemong a latelang esita le sehlahisoa se ka har'a nako ea tiisetso: Liphoso li bakoa ke ho se sebetse hantle. Ts'ebetso ha e etsoe ho latela litaelo tse fanoeng bukeng ea tataiso.
   Mochini o senyehile ka lebaka la lisosa tse kang mollo, likhohola, kapa voltage mekhelo.
   Mochine o senyehile ka lebaka la tšebeliso e fosahetseng. U sebelisa mochini ho etsa mesebetsi e meng e sa tšehetsoeng.
5. Litefiso tsa litšebeletso li baloa ho latela litefiso tsa 'nete. Haeba ho na le konteraka, litokisetso tse boletsoeng ho konteraka ke tsona tse renang.
6. Boloka karete ena ea tiisetso. E bontše setsi sa tlhokomelo ha u batla litšebeletso tsa tlhokomelo.
7. Ikopanye le morekisi oa lehae kapa ikopanye le k'hamphani ea rona ka kotloloho haeba u na le lipotso.

Shenzhen INVT Electric Co., Ltd.
Aterese: INVT Guangming Technology Building, Songbai Road, Matian,
Setereke sa Guangming, Shenzhen, China
Websebaka: www.invt.com
Litokelo tsohle li sirelelitsoe. Litaba tse tokomaneng ena li ka fetoha ntle le
hlokomela.

Litokomane / Lisebelisoa

invt IVC3 Series Programmable Logic Controller [pdf] Bukana ea Mosebelisi IVC3 Series, Programmable Logic Controller, IVC3 Series Programmable Logic Controller, Logic Controller, Controller

Litšupiso

• Bukana ea Mosebelisi