AEMC INSTRUMENTS 1821 Thermometer Data Logger

Nqe Lus Qhia Txog Kev Ua Raws Cai

Chauvin Arnoux®, Inc. dba AEMC® Instruments tau lees paub tias cov cuab yeej no tau raug ntsuas los ntawm kev siv cov qauv thiab cov cuab yeej ua raws li cov qauv thoob ntiaj teb.
Peb lav tias thaum lub sijhawm xa khoom koj lub cuab yeej tau ua tiav nws cov ntawv tshaj tawm.
Daim ntawv pov thawj NIST traceable tuaj yeem thov thaum lub sijhawm yuav khoom, lossis tau txais los ntawm kev xa rov qab cov cuab yeej rau peb qhov chaw kho thiab ntsuas qhov ntsuas, rau tus nqi nominal.
Qhov kev pom zoo calibration ncua sij hawm rau qhov ntsuas no yog 12 lub hlis thiab pib rau hnub uas tus neeg siv khoom tau txais. Rau recalibration, thov siv peb cov kev pab cuam calibration. Xa mus rau peb qhov kho thiab calibration seem ntawm www.aemc.com.

• Lub #:……………………………………………………………………………………………..
• Catalog #:…………………………………………………………………………………………….
• Qauv #:…………………………………………………………………………………………….
• Thov sau hnub tsim nyog raws li qhia:………………………………………
• Hnub Tau Txais:……………………………………………………………………………………………
• Hnub Kawg Calibration:………………………………………………………………………………

Ua tsaug rau kev yuav khoom Model 1821 los yog Model 1822 thermocouple tus pas ntsuas kub cov ntaub ntawv logger, los yog Model 1823 tsis kam ntsuas kub cov ntaub ntawv logger. Rau cov txiaj ntsig zoo tshaj plaws los ntawm koj lub cuab yeej:
nyeem cov lus qhia ua haujlwm no kom zoo zoo
ua raws li kev ceev faj rau kev siv

• CEEB TOOM, txaus ntshai DANGER! Tus neeg teb xov tooj yuav tsum xa mus rau cov lus qhia no thaum twg cov cim kev phom sij no tshwm sim.
• Cov ntaub ntawv lossis cov lus qhia muaj txiaj ntsig.
• Roj teeb.
• Hlau nplaum.
• Cov khoom tau raug tshaj tawm rov ua dua tom qab kev tshuaj xyuas ntawm nws lub neej voj voog raws li ISO14040 tus qauv.
• AEMC tau siv txoj hauv kev Eco-Design los tsim cov khoom siv no. Kev soj ntsuam ntawm kev ua tiav lub neej ua haujlwm tau ua rau peb tswj hwm thiab ua kom zoo dua qhov cuam tshuam ntawm cov khoom ntawm ib puag ncig. Hauv tshwj xeeb, cov khoom siv no tshaj li cov kev cai tswj hwm ntawm kev rov ua dua tshiab thiab rov siv dua.
• Qhia txog kev ua raws li European cov lus qhia thiab nrog cov cai tswj hwm EMC.
• Qhia tias, nyob rau hauv European Union, cov cuab yeej yuav tsum tau xaiv pov tseg raws li cov lus qhia WEEE 2002/96/EC. Cov cuab yeej no yuav tsum tsis txhob muab pov tseg hauv tsev.

Cov kev ceev faj

Cov cuab yeej no tau ua raws li tus qauv kev nyab xeeb IEC 61010-2-030, rau voltages mus txog 5V nrog rau hauv av. Tsis ua raws li cov lus qhia txog kev nyab xeeb hauv qab no tuaj yeem ua rau hluav taws xob poob siab, hluav taws kub, tawg, thiab kev puas tsuaj rau lub cuab yeej thiab / lossis kev teeb tsa uas nws nyob.

• Tus neeg teb xov tooj thiab / lossis lub luag haujlwm yuav tsum ua tib zoo nyeem thiab nkag siab meej txog txhua yam kev ceev faj yuav tsum tau siv. Kev paub zoo thiab kev paub txog kev phom sij hluav taws xob yog qhov tseem ceeb thaum siv cov cuab yeej no.
• Ua tib zoo saib xyuas cov xwm txheej ntawm kev siv, suav nrog qhov kub thiab txias, txheeb ze av noo, qhov siab, qhov ntsuas ntawm cov pa phem, thiab qhov chaw siv.
• Tsis txhob siv lub cuab yeej yog tias nws zoo li puas, tsis tiav, lossis kaw tsis zoo.
• Ua ntej txhua yam siv, xyuas qhov xwm txheej ntawm lub tsev thiab cov khoom siv. Txhua yam khoom uas lub rwb thaiv tsev tsis zoo (txawm tias ib nrab) yuav tsum tau muab tso rau kev kho lossis khawb.
• Tsis txhob siv cov kev ntsuas ntawm liab qab nyob conductors. Siv ib qho tsis sib cuag los yog zoo insulated sensor.
• Ib txwm hnav cov khoom tiv thaiv tus kheej (PPE), tshwj xeeb yog cov hnab looj tes insulating, yog tias muaj kev tsis ntseeg txog qhov voltage theem uas qhov ntsuas kub sensor txuas nrog.
• Txhua qhov kev daws teeb meem thiab kev kuaj xyuas metrological yuav tsum tau ua los ntawm cov neeg ua haujlwm muaj peev xwm, raug lees paub.

Tau txais koj cov khoom xa tuaj
Thaum tau txais koj cov khoom xa tuaj, xyuas kom meej tias cov ntsiab lus zoo ib yam nrog cov npe ntim khoom. Qhia rau koj tus neeg muag khoom ntawm txhua yam khoom uas ploj lawm. Yog tias cov cuab yeej zoo li puas lawm, file ib daim ntawv thov tam sim nrog tus neeg nqa khoom thiab ceeb toom rau koj tus neeg xa khoom ib zaug, muab cov lus piav qhia ntxaws txog kev puas tsuaj. Txuag lub thawv ntim khoom puas los ua pov thawj koj qhov kev thov.
Ordering Information

• Thermocouple Thermometer Cov Ntaub Ntawv Logger Model 1821….………………….………………………… Cat. #2121.74
• Xws li cov hnab nqa khoom muag, peb lub roj teeb AA alkaline, 6 ft. (1.8m) USB cable, ib lub thermocouple K Hom, phau ntawv qhia pib ceev, USB ntiv tes xoo tsav nrog Cov ntaub ntawvView® software thiab cov neeg siv phau ntawv.
• Thermocouple Thermometer Cov Ntaub Ntawv Logger Model 1822….…………………………………………………………. Cat. #2121.75
• Xws li cov hnab nqa khoom muag, peb lub roj teeb AA alkaline, 6 ft. (1.8m) USB cable, ob lub thermocouple K Hom, phau ntawv qhia pib ceev, USB ntiv tes xoo-tsav nrog Cov Ntaub NtawvView® software thiab cov neeg siv phau ntawv.
• RTD Thermometer Cov Ntaub Ntawv Logger Model 1823….…………………………………………………………………….. Cat. #2121.76
• Xws li cov hnab nqa khoom muag, peb lub roj teeb AA alkaline, 6 ft. USB cable, ib qho 3 prong hloov tau RTD, phau ntawv qhia pib ceev, USB ntiv tes xoo tsav nrog Cov ntaub ntawvView® software thiab cov neeg siv phau ntawv.

Hloov qhov chaw

• Thermocouple - Flexible (1M), K Hom, -58 txog 480 ° F (-50 txog 249 ° C) …………………………………………. Cat. #2126.47
• Cable – Hloov 6 ft. (1.8m) USB …………………………………………………………………….Cat. #2138.66
• Pouch – Replacement Carrying Pouch……………………………………………………………………………………………..Cat. #2154.71
• 3-Prong Mini Flat Pin Connector rau RTD ……………………………………………………………………. Cat. #5000.82

Cov khoom siv

• Multifix Universal Mounting System ………………………………………..……………………………………… Cat. #5000.44
• Adapter – US Phab Ntsa Plug rau USB…………………………………………………………………………………………….. Cat. #2153.78
• Shock Proof Housing………………………………………..…...………………………………..……..………….. Cat. #2122.31
• Case – General Purpose Carrying Case…………..…….….…………………………..……..…………….Cat. #2118.09
• Thermocouple - Koob, 7.25 x 0.5 "K Hom, -58 ° txog 1292 ° F …………..….…………………………. Cat. #2126.46
• Rau accessories thiab hloov qhov chaw, mus saib peb webqhov chaw: www.aemc.com.

THOV KOM TAU

Kev teeb tsa roj teeb

Lub cuab yeej txais peb lub roj teeb AA lossis LR6 alkaline.

1. "Tear-poob" notch rau dai instrument
2. Cov pob tsis nplua
3. Magnets rau mounting rau ib tug metallic nto
4. Roj teeb npog npog

Hloov cov roj teeb:

1. Nias lub tab ntawm lub roj teeb npog npog thiab nqa kom meej.
2. Tshem lub roj teeb lub hau npog.
3. Ntxig cov roj teeb tshiab, kom ntseeg tau qhov tseeb polarity.
4. Kaw lub roj teeb npog npog; xyuas kom nws yog kiag li thiab raug kaw.

Instrument Pem Hauv Ntej Vaj Huam Sib Luag

Qauv 1821 thiab 1822

1. T1 thermocouple input
2. T2 thermocouple input
3. Backlit LCD
4. Keypad
5. ON/OFF khawm
6. Hom B micro-USB connector

Qauv: 1823

1. RTD sojntsuam input
2. Backlit LCD
3. Keypad
4. ON/OFF khawm
5. Hom B micro-USB connector

Cov cuab yeej muaj nuj nqi

• Cov Qauv 1821 thiab 1822 yog cov thermocouple-based thermometers nrog ib thiab ob txoj kab, feem. Lawv ua haujlwm nrog cov sensor hom K (Chromel / Alumel), J (hlau / Constantan), T (tooj liab / Constantan), E (Chromel / Constantan), N (Nicrosil / Nisil), R (platinum-rhodium / platinum), thiab S (platinum-rhodium / platinum) thiab tuaj yeem ntsuas kub ntawm -418 txog +3213 ° F (-250 txog +1767 ° C) nyob ntawm qhov ntsuas.
• Tus Qauv 1823 yog ib-channel resistive-probe tus pas ntsuas kub (RTD100 lossis RTD1000). Nws ntsuas kub ntawm -148 txog +752 ° F (-100 txog +400 ° C).

Cov cuab yeej ib leeg no tuaj yeem ua tau

• Tso cov ntsuas kub hauv ° C lossis ° F
• Sau qhov ntsuas qhov tsawg kawg nkaus thiab siab tshaj plaws nyob rau lub sijhawm teev tseg
• Sau thiab khaws cov ntsuas
• Sib txuas lus nrog lub computer ntawm Bluetooth lossis USB cable

Cov ntaub ntawvView® nrog cov ntaub ntawv Logger Control Vaj Huam Sib Luag software tuaj yeem ntsia tau rau hauv lub computer kom tso cai rau koj los teeb tsa cov cuab yeej, view kev ntsuas hauv lub sijhawm tiag tiag, rub tawm cov ntaub ntawv los ntawm cov cuab yeej, thiab tsim cov ntawv ceeb toom.

Tig lub Instrument ON/OFF

• ON: Nias lub khawm rau> 2 vib nas this.
• Tawm: Nias lub khawm rau> 2 vib nas this thaum lub ntsuas ON. Nco ntsoov tias koj tsis tuaj yeem kaw lub ntsuas ntsuas thaum nws nyob hauv HOLD lossis kaw hom.

Yog tias qhov screen rau sab laug tshwm thaum pib, qhov kev kaw cia tseem tab tom ua tiav lub sijhawm kawg qhov ntsuas tau raug kaw. Qhov kev tshuaj ntsuam no qhia tias qhov ntsuas tau txuag cov ntaub ntawv kaw.
Tsis txhob kaw qhov ntsuas thaum lub vijtsam no tshwm sim; txwv tsis pub, cov ntaub ntawv kaw yuav ploj.

Cov nyees khawm

Khawm	Muaj nuj nqi
	(Cov qauv 1821 thiab 1823) Toggles ntawm ° C thiab ° F.
	(Qauv 1822) Luv nias toggles ntawm T2 thiab T1-T2. Ntev nias (> 2 vib nas this) toggles ntawm ° C thiab ° F.
	Cov xovxwm luv luv khaws qhov ntsuas thiab hnub / sijhawm hauv qhov ntsuas lub cim xeeb. MAP hom: ntxiv qhov ntsuas rau qhov ntsuas hauv MAP (§3.1.3). Ntev nias pib / nres qhov kev kaw tseg.
	Luv nias tig rau lub teeb rov qab. Ntev nias: (Cov Qauv 1821 thiab 1822) xaiv hom thermocouple (K, J, T, E, N, R, S) (Model 1823) toggles ntawm PT100 thiab PT1000 probes
	Luv xovxwm freezes cov zaub. Ntev nias qhib / deactivates Bluetooth.
MAX MIN THIAB	Xovxwm luv nkag mus rau MAX MIN hom; ntsuas qhov tseem ceeb txuas ntxiv mus tso tawm. Xovxwm thib ob qhia txog tus nqi siab tshaj plaws. Xovxwm thib peb qhia txog tus nqi tsawg kawg nkaus. Plaub xovxwm rov qab mus rau qhov kev ntsuas qhov qub. Ntev nias tawm MAX MIN hom.

Zaub

• – – – – qhia tias sensors los yog probes tsis txuas.
• qhia tias qhov ntsuas tshaj qhov ntsuas ntsuas (zoo lossis tsis zoo). qhia tias Auto OFF yog neeg xiam. Qhov no tshwm sim thaum lub ntsuas yog:
• kaw tseg
• hauv MAX MIN lossis HOLD hom
• txuas ntawm USB cable mus rau lwm lub hwj chim lossis lub computer
• Kev sib txuas lus ntawm Bluetooth
• teem rau Auto OFF neeg xiam (saib §2.4).

SETUP

Ua ntej siv koj lub cuab yeej, koj yuav tsum teem nws hnub thiab sijhawm. Yog tias koj npaj yuav siv lub tswb, koj yuav tsum txhais lub tswb ntsuas qhov pib. Hnub / sijhawm thiab lub tswb ceeb toom yuav tsum tau teeb tsa los ntawm Cov Ntaub NtawvView. Lwm yam kev teeb tsa yooj yim muaj xws li xaiv:

• ° F lossis ° C rau ntsuas ntsuas (yuav ua tau ntawm qhov ntsuas lossis ntawm Cov Ntaub NtawvView)
• Nws pib OFF lub sijhawm (yuav tsum tau Cov Ntaub NtawvView)
• (Cov qauv 1821 thiab 1822) Sensor hom (yuav ua tau rau ntawm qhov ntsuas lossis ntawm cov ntaub ntawvView)

Cov ntaub ntawvView Kev teeb tsa

1. Ntxig lub USB tsav uas los nrog cov cuab yeej rau hauv qhov chaw nres nkoj USB ntawm koj lub computer.
2. Yog tias Autorun qhib, lub qhov rai AutoPlay tshwm rau ntawm koj lub vijtsam. Nyem "Qhib nplaub tshev rau view files" los tso saib cov ntaub ntawvView nplaub tshev. Yog tias Autorun tsis tau qhib lossis tso cai, siv Windows Explorer los nrhiav thiab qhib USB tsav uas sau tias "Cov ntaub ntawvView”
3. Thaum ntawvView folder qhib, nrhiav cov file Setup.exe thiab nyem ob npaug rau nws.
4. Lub teeb screen tshwm. Qhov no ua rau koj xaiv hom lus ntawm Cov Ntaub NtawvView rau nruab. Koj tuaj yeem xaiv cov kev xaiv ntxiv rau nruab (txhua qhov kev xaiv tau piav qhia hauv Daim Ntawv Qhia Qhia). Ua koj xaiv thiab nyem Install.
5. Lub vijtsam InstallShield Wizard tshwm. Qhov kev pab cuam no coj koj los ntawm Cov Ntaub NtawvView nruab txheej txheem. Thaum koj ua tiav cov ntxaij vab tshaus no, nco ntsoov xyuas Cov Ntaub Ntawv Loggers thaum raug ceeb toom kom xaiv cov yam ntxwv rau nruab.
6. Thaum InstallShield Wizard tiav kev txhim kho Cov Ntaub NtawvView, lub teeb screen tshwm. Nyem Exit kom kaw. Cov ntaub ntawvView folder tshwm nyob rau hauv koj lub computer desktop.

Txuas lub cuab yeej rau lub computer
Koj tuaj yeem txuas lub cuab yeej rau lub computer los ntawm USB cable (muab nrog lub ntsuas) lossis Bluetooth®. Thawj ob kauj ruam ntawm txoj kev sib txuas yog nyob ntawm hom kev sib txuas:

USB

1. Txuas lub cuab yeej mus rau ib qho chaw nres nkoj USB uas siv cov khoom siv cable.
2. Tig lub ntsuas ntsuas. Yog tias qhov no yog thawj zaug qhov ntsuas no tau txuas nrog lub khoos phis tawj no, cov tsav tsheb yuav raug teeb tsa. Tos rau kev teeb tsa tsav tsheb kom tiav ua ntej pib nrog cov kauj ruam 3 hauv qab no.

Bluetooth: Txuas lub cuab yeej ntawm Bluetooth yuav tsum muaj Bluegiga BLED112 Smart Dongle (muag nyias) ntsia hauv koj lub computer. Thaum lub dongle raug ntsia, ua cov hauv qab no:

1. Tig lub ntsuas ntsuas los ntawm nias lub khawm.
2. Qhib Bluetooth ntawm lub cuab yeej los ntawm nias lub khawm kom txog thaum lub cim tshwm hauv LCD.
   Tom qab USB cable txuas nrog lossis Bluetooth qhib, ua raws li hauv qab no:
3. Qhib Cov Ntaub NtawvView folder ntawm koj lub desktop. Qhov no qhia cov npe ntawm cov cim rau Control Vaj Huam Sib Luag (s) ntsia nrog Cov Ntaub NtawvView.
4. Qhib Cov Ntaub NtawvView Cov Ntaub Ntawv Logger Tswj Vaj Huam Sib Luag los ntawm txhaj rau icon.
5. Hauv cov ntawv qhia zaub mov nyob rau sab saum toj ntawm lub vijtsam, xaiv Pab. Hauv cov ntawv qhia zaub mov nco-down uas tshwm, nyem qhov kev xaiv Pab Cov Ntsiab Lus. Qhov no qhib cov ntaub ntawv Logger Control Vaj Huam Sib Luag Pab Pawg.
6. Siv Cov Ntsiab Lus Qhov rai hauv Cov Txheej Txheem Pabcuam txhawm rau nrhiav thiab qhib lub ntsiab lus "Txuas mus rau ib qho cuab yeej." Qhov no muab cov lus qhia piav qhia yuav ua li cas txuas koj lub cuab yeej rau lub computer.
7. Thaum lub cuab yeej txuas nrog, nws lub npe tshwm nyob rau hauv Cov Ntaub Ntawv Logger Network nplaub tshev nyob rau sab laug ntawm Pawg Tswj Xyuas. Daim npav ntsuab tshwm nyob ib sab ntawm lub npe qhia tias nws txuas nrog tam sim no.

Hnub tim/sijhawm

1. Xaiv cov cuab yeej hauv Data Logger Network.
2. Hauv cov ntawv qhia zaub mov bar, xaiv Instrument. Hauv cov ntawv qhia zaub mov nco-down uas tshwm, nyem Teem Clock.
3. Lub hnub / Sijhawm dialog box tshwm. Ua kom tiav cov teb hauv lub dialog box no. Yog tias koj xav tau kev pab, nias F1.
4. Thaum koj ua tiav qhov teeb tsa hnub thiab sijhawm, nyem OK kom txuag koj cov kev hloov pauv rau lub ntsuas.

Nws pib OFF

• Los ntawm lub neej ntawd, lub cuab yeej cia li kaw tom qab 3 feeb ntawm kev tsis ua haujlwm. Koj tuaj yeem siv Cov Ntaub Ntawv Logger Tswj Vaj Huam Sib Luag los hloov qhov pib OFF lub sijhawm, lossis lov tes taw cov yam ntxwv no, raws li tau qhia los ntawm Pab Pawg uas tuaj nrog software.
• Thaum Auto OFF yog neeg xiam, lub cim tshwm hauv qhov ntsuas ntsuas LCD.

Kev ntsuas ntsuas

• Lub pob ntawm lub ntsuas vaj huam sib luag pem hauv ntej tso cai rau koj hloov ntawm ° C thiab ° F rau ntsuas ntsuas. Koj tuaj yeem teeb tsa qhov no los ntawm Cov Ntaub Ntawv Logger Tswj Vaj Huam Sib Luag.

Tswb

• Koj tuaj yeem tsim cov phiaj xwm ceeb toom rau txhua qhov kev ntsuas raws siv cov ntaub ntawvView Data Logger Control Vaj Huam Sib Luag.
• Yog xav paub ntxiv txog kev siv lub tswb, saib §3.4.

Hom Sensor

• Cov Qauv 1821 thiab 1822 xav kom koj xaiv hom sensor (K, J, T, E, N, R, lossis S) siv nrog lub ntsuas. Koj tuaj yeem ua qhov no ntawm qhov ntsuas, lossis ntawm Cov Ntaub NtawvView. (Nco ntsoov tias Tus Qauv 1823 tau kuaj pom hom sensor thaum koj nruab lub sensor.)

Ntsuas

1. Nias thiab tuav lub hom khawm. Tom qab ob peb lub sij hawm lub sensor hom qhia nyob rau hauv qab ntawm LCD pib cycling los ntawm cov kev xaiv muaj.
2. Thaum hom sensor xav tau tshwm sim, tso lub khawm Hom.

Cov ntaub ntawvView

1. Nyem lub ntsuas kub tab nyob rau hauv Configure Instrument dialog box. Qhov no qhia cov npe ntawm hom sensor muaj.
2. Xaiv hom xav tau, thiab nyem OK kom txuag koj cov kev hloov pauv.

STAANDALONE Kev Ua Haujlwm

Cov cuab yeej tuaj yeem ua haujlwm hauv ob hom:

• Stand-alone hom, piav nyob rau hauv nqe lus no
• Hom chaw taws teeb, nyob rau hauv uas qhov ntsuas yog tswj los ntawm lub computer khiav cov ntaub ntawvView (saib § 4)

Kev teeb tsa Sensor

• Lub cuab yeej txais ib lossis ob lub sensors, nyob ntawm tus qauv:
• Qauv 1821: txuas ib lub thermocouple.
• Qauv 1822: txuas ib lossis ob lub thermocouples ntawm tib hom.
• Qauv 1823: txuas ib qho RTD100 lossis RTD1000 sojntsuam.

Xyuas kom meej polarity thaum txhim kho sensors.

• Cov Qauv 1821 thiab 1822 txais cov thermocouples ntawm hom K, J, T, E, N, R, lossis S.
• Tus Qauv 1821 tuaj yeem txuas rau ib lub thermocouple, thiab Model 1822 rau ob. Thaum siv tus qauv 1822 nrog ob lub thermocouples, ob qho tib si yuav tsum yog tib hom.
• Cov pins ntawm cov txiv neej thermocouple connectors yog ua los ntawm cov ntaub ntawv them nyiaj uas (txawm hais tias txawv ntawm cov thermocouple) muab tib emf nyob rau hauv qhov kub ntawm kev siv.
• Kev ntsuas kub ntawm cov terminals kom ntseeg tau tias tsis siv neeg txias kev sib tshuam.
• Tom qab tso lub sensor (s) rau hauv Model 1821 lossis 1822, nias thiab tuav cia. khawm. Thaum koj tuav lub khawm qis, lub LCD yuav dhau los ntawm cov npe ntawm cov thermocouple hom muaj. Thaum hom raug tso tawm, tso tawm khawm.
• Tus Qauv 1823 cia li kuaj xyuas hom kev sojntsuam (PT100 thiab PT1000).

Ua Kev Ntsuas
Yog hais tias lub ntsuas yog OFF, nias thiab tuav cia khawm kom txog thaum nws tig ON. Cov cuab yeej qhia lub sijhawm tam sim no, ua raws li qhov ntsuas (s).

Tos kom cov zaub kom ruaj khov ua ntej nyeem qhov ntsuas.

Qhov kub thiab txias (Model 1822)

• Thaum tus qauv 1822 txuas nrog ob lub sensors, nws qhia ob qho kev ntsuas, nrog T1 nyob rau hauv qab thiab T2 nyob rau sab saum toj (saib cov duab qhia saum toj). Koj tuaj yeem tso saib qhov sib txawv ntawm qhov ntsuas sensor los ntawm nias lub khawm. Kev ntsuas T2 yog hloov los ntawm qhov sib txawv ntawm qhov kub thiab txias, sau npe T1-T2. Ib tug thib ob xovxwm ntawm restores qhov ntsuas T2.

MAX-MIN hom
Koj tuaj yeem saib xyuas qhov siab tshaj plaws thiab qhov ntsuas qhov tsawg kawg nkaus los ntawm nias lub pob MAX MIN. Qhov no qhia cov lus MIN MAX nyob rau sab saum toj ntawm cov zaub (saib hauv qab). Hauv hom no, nias MAX MIN ib zaug qhia txog tus nqi siab tshaj plaws ntsuas thaum lub sijhawm tam sim no. Ib tug thib ob xovxwm qhia qhov tsawg kawg nkaus tus nqi, thiab ib tug thib peb restores lub qub zaub. Tom qab nias ntawm MAX MIN rov ua dua lub voj voog no.

• Txhawm rau tawm MAX MIN hom, nias lub pob MAX MIN rau> 2 vib nas this.
• Nco tseg tias thaum siv Model 1822 hauv MAX MIN hom, lub khawm yog neeg xiam.

THOV
Nyob rau hauv ib txwm ua haujlwm, cov zaub hloov tshiab ntsuas hauv lub sijhawm. Nias lub khawm HOLD "freezes" qhov ntsuas tam sim no thiab tiv thaiv cov zaub los ntawm kev hloov kho. Nias HOLD zaum ob "unfreezes" cov zaub.

Kev ntsuas ntsuas
Koj tuaj yeem pib thiab nres qhov kev kaw tseg ntawm qhov ntsuas. Cov ntaub ntawv kaw tseg yog khaws cia rau hauv qhov ntsuas lub cim xeeb, thiab tuaj yeem rub tawm thiab viewed ntawm lub computer khiav cov ntaub ntawvView Data Logger Control Vaj Huam Sib Luag.

• Koj tuaj yeem sau cov ntaub ntawv los ntawm nias lub khawm:
• Cov xovxwm luv luv (MEM) sau cov ntsuas tam sim no thiab hnub tim.
• Ib lub xovxwm ntev (REC) pib lub sijhawm kaw. Thaum lub kaw lus tab tom ua tiav, lub cim REC tshwm nyob rau sab saum toj ntawm cov zaub. Ib tug thib ob ntev nias ntawm nres qhov kev kaw cia. Nco ntsoov tias thaum lub cuab yeej kaw, luv nias ntawm tsis muaj teebmeem.
• Txhawm rau teem sijhawm kaw cov ntu, thiab rub tawm thiab view cov ntaub ntawv kaw, sab laj cov ntaub ntawvView Data Logger Control Vaj Huam Sib Luag Pab (§4).

Aw rms
Koj tuaj yeem tsim cov phiaj xwm ceeb toom ntawm txhua qhov ntsuas channel ntawm Cov Ntaub NtawvView Data Logger Control Vaj Huam Sib Luag. Nyob rau hauv standalone hom, yog hais tias lub tswb pib pib programmed, lub cim qhia. Thaum ib qho chaw hla dhau, qhov cim blinks, thiab ib qho ntawm cov cim blinking hauv qab no tshwm rau sab xis ntawm qhov ntsuas:

• qhia tias qhov ntsuas yog siab tshaj qhov pib.
• qhia tias qhov ntsuas tau qis dua qhov pib qis.
• qhia tias qhov ntsuas nyob nruab nrab ntawm ob qhov chaw pib.

yuam kev
Cov cuab yeej kuaj pom qhov yuam kev thiab qhia lawv hauv daim ntawv Er.XX:

• Er.01 Hardware malfunction ntes tau. Cov cuab yeej yuav tsum raug xa mus rau kev kho.
• Er.02 BIInternal nco yuam kev. Txuas lub cuab yeej rau lub computer ntawm USB cable thiab format nws nco siv Windows.
• Er.03 Hardware malfunction ntes tau. Cov cuab yeej yuav tsum raug xa mus rau kev kho.
• Er.10 Lub ntsuas tsis tau raug kho kom raug. Cov cuab yeej yuav tsum raug xa mus rau cov neeg siv khoom.
• Er.11 Lub firmware yog incompatible nrog lub ntsuas. Nruab qhov tseeb firmware (saib §6.4).
• Er.12 Lub firmware version yog incompatible nrog lub ntsuas. Reload lub yav dhau los firmware version.
• Er.13 Kev teev sijhawm yuam kev. Xyuas kom meej tias qhov ntsuas lub sij hawm thiab lub sij hawm ntawm cov ntaub ntawvView Cov Ntaub Ntawv Logger Tswj Vaj Huam Sib Luag yog tib yam (saib §2.3).

DATAVIEW

Raws li tau piav qhia hauv § 2, Cov Ntaub NtawvView® yuav tsum tau ua ntau yam kev teeb tsa yooj yim suav nrog kev txuas lub cuab yeej rau lub khoos phis tawj, teeb tsa lub sijhawm thiab hnub tim ntawm lub ntsuas ntsuas, thiab hloov qhov Auto OFF teeb tsa. Ntxiv rau, DataView tso cai rau koj mus:

• Configure thiab teem sij hawm kaw ib ntu ntawm qhov ntsuas.
• Download tau kaw cov ntaub ntawv los ntawm qhov ntsuas mus rau lub computer.
• Tsim cov ntawv ceeb toom los ntawm cov ntaub ntawv rub tawm.
• View ntsuas ntsuas hauv lub sijhawm ntawm lub computer.

Yog xav paub ntxiv txog kev ua cov haujlwm no, sab laj Cov Ntaub NtawvView Data Logger Control Vaj Huam Sib Luag Pab.

TECHNICAL CHARACTERISTICS

Cov xwm txheej siv

Ntau qhov kev cuam tshuam	Kev siv qhov tseem ceeb
Kub	73 ± 3.6 ° F (23 ± 2 ° C)
txheeb ze humidity	45% txog 75%
Muab voltage	3 rau 4.5v
Hluav taws xob	<1V / m
Sib nqus teb	<40A/m

Qhov tsis paub tseeb hauv qhov tseeb yog qhov yuam kev teev tseg rau cov xwm txheej siv.

• θ = kub
• R = nyeem ntawv

Hluav taws xob Specifications

• Qauv 1821 thiab 1822
• Kev ntsuas kub

Hom thermocouple	J, K, T, N, E, R, S
Kev ntsuas qhov ntsuas tshwj xeeb (raws li hom thermocouple siv)	J: -346 txog +2192 ° F (-210 txog +1200 ° C) K: -328 txog +2501 ° F (-200 txog +1372 °C) T: -328 txog +752 ° F (-200 txog + + 400 ° C) N: -328 txog +2372 ° F (-200 txog +1300 ° C) E: -238 txog +1742 ° F (-150 txog +950 °C) R: +32 txog +3212 ° F ( 0 txog +1767 ° C) S: +32 txog +3212 ° F (0 txog +1767 ° C)
Kev daws teeb meem	° F: q < 1000 ° F: 0.1 ° F thiab q ³ 1000 ° F: 1 ° F Qhov kub thiab txias: 1000 ° C thiab q ³ 0.1 ° C: 1000 ° C
Intrinsic uncertainty (J, K, T, N, E)	° F: q £ -148°F: ±(0.2% R ± 1.1°F) -148 ° F < q £ +212 ° F: ± (0.15% R ± 1.1 ° F) q > + 212 ° F ± (0.1% R ± 1.1 ° F) °C: q £ -100°C: ± (0.2% R ± 0.6°C) -100 ° C < q £ +100 ° C: ± (0.15% R ± 0.6 ° C) Q> +100 ° C: ± (0.1% R ± 0.6 ° C)
Intrinsic uncertainty (R, S)	° F: q £ +212°F: ±(0.15%R ± 1.8°F) Q: > + 212 ° F: ± (0.1% R ± 1.8 ° F) °C: q £ +100 °C: ± (0.15% R ± 1.0 °C) Q> +100 ° C: ± (0.1% R ± 1.0 ° C)

Kev laus ntawm Internal reference voltage ua rau qhov tsis meej pem hauv ntej kom nce:

• Tom qab 4000 teev ntawm kev siv nrog R thiab S thermocouples
• Tom qab 8000 teev nrog lwm cov thermocouples

Rau Cov Qauv 1821 thiab 1822, kev sib txuas cov cuab yeej rau lub computer ntawm micro USB cable ua rau muaj qhov kub thiab txias hauv qhov ntsuas uas yuav ua rau muaj qhov ntsuas kub ntawm kwv yees li 2.7 ° F (1.5 ° C). Qhov kub nce no tsis tshwm sim thaum lub ntsuas hluav taws xob txuas nrog lub qhov hluav taws xob ntawm phab ntsa lossis thaum nws siv los ntawm cov roj teeb.

Variations nyob rau hauv ntau yam kev siv

Ntau qhov kev cuam tshuam	Ntau yam kev cuam tshuam	Qhov muaj feem cuam tshuam	Kev npam
Kub	+14 txog 140 ° F (-10 txog +60 ° C)	q	J: ± (0.02% R ± 0.27 ° F) / 18 ° F (± (0.02% R ± 0.15 ° C) / 10 ° C) K: ± (0.03% R ± 0.27 ° F) / 18 ° F (± (0.03% R ± 0.15 ° C) / 10 ° C) T: ± (0.03% R ± 0.27 ° F) / 18 ° F (± (0.03% R ± 0.15 ° C) / 10 ° C) E: ± ( 0.02% R ± 0.27 ° F) / 18 ° F (± (0.02% R ± 0.15 ° C) / 10 ° C) N: ± (0.035% R ± 0.27 ° F) / 18 ° F (± (0.035% R ± 0.15 ° C) / 10 ° C) R: ± (0.01% R ± 0.45 ° F) / 18 ° F (± (0.01% R ± 0.25 ° C) / 10 ° C) S: ± (0.01% R ± 0.45 ° F) / 18 ° F (± (0.01% R ± 0.25 ° C) / 10 ° C)

Kev laus ntawm Internal reference voltage ua rau qhov tsis meej pem hauv ntej kom nce:

• Tom qab 4000 teev ntawm kev siv nrog R thiab S thermocouples
• Tom qab 8000 teev nrog lwm cov thermocouples

Rau Cov Qauv 1821 thiab 1822, kev sib txuas cov cuab yeej rau lub computer ntawm micro USB cable ua rau muaj qhov kub thiab txias hauv qhov ntsuas uas yuav ua rau muaj qhov ntsuas kub ntawm kwv yees li 2.7 ° F (1.5 ° C). Qhov kub nce no tsis tshwm sim thaum lub ntsuas hluav taws xob txuas nrog lub qhov hluav taws xob ntawm phab ntsa lossis thaum nws siv los ntawm cov roj teeb.

Teb Sijhawm
Lub sijhawm teb yog lub sijhawm xav tau rau emf kom ncav cuag 63% ntawm nws qhov kev hloov pauv tag nrho thaum lub thermocouple raug kub hnyiab. Lub sij hawm teb ntawm lub sensor nyob ntawm lub peev xwm ntawm qhov nruab nrab thiab thermal conductivity ntawm lub sensor. Lub sij hawm teb ntawm lub thermocouple nrog zoo thermal conductivity, immersed nyob rau hauv ib tug nruab nrab ntawm high kub muaj peev xwm, yuav luv luv. Conversely, nyob rau hauv cov huab cua los yog lwm yam thermally unfavorable nruab nrab, lub sij hawm teb qhov tseeb yuav ua tau 100 lub sij hawm los yog ntev tshaj lub sij hawm teb cov thermocouple.

Qauv: 1823

Kev ntsuas kub

Kub sensor	PT100 los yog PT1000
Kev ntsuas qhov ntsuas	-148 rau + 752 ° F (-100 txog +400 ° C)
Kev daws teeb meem	0.1 ° F (0.1 ° C)
Intrinsic uncertainty	± (0.4% R ± 0.5 ° F) (± (0.4% R ± 0.3 ° C))

Txhawm rau txiav txim siab tag nrho qhov tsis paub tseeb, ntxiv qhov tsis paub tseeb ntawm lub platinum sojntsuam rau qhov ntsuas, qhia hauv cov lus ua ntej.

Variation nyob rau hauv ntau yam ntawm kev siv

Ntau qhov kev cuam tshuam	Ntau yam kev cuam tshuam	Qhov muaj feem cuam tshuam	Kev npam
Kub	+14 txog +140 ° F (-10 txog + 60 ° C)	q	± 0.23 ° F / 18 ° F (± 0.13 ° C / 10 ° C)

Nco
Cov cuab yeej muaj 8MB ntawm flash nco, txaus los sau thiab khaws ib lab kev ntsuas. Txhua qhov ntsuas tau sau nrog hnub tim, sijhawm, thiab chav tsev. Rau ob-channel Model 1822, ob qhov kev ntsuas tau kaw.

USB

• Txoj Cai: USB Loj Cia
• Kev sib kis ceev tshaj plaws: 12 Mbit / s Hom B micro-USB connector

Bluetooth

• Bluetooth 4.0 BLE
• Ntau yam 32 '(10m) raug thiab mus txog 100' (30m) hauv kab pom
• Cov zis hluav taws xob: +0 txog -23dBm
• Nominal rhiab heev: -93dBm
• Kev hloov pauv siab tshaj plaws: 10 kbit / s
• Kev siv nruab nrab: 3.3μA txog 3.3V

Fais fab mov

• Qhov ntsuas tau siv los ntawm peb lub 1.5V LR6 lossis AA alkaline roj teeb. Koj tuaj yeem hloov cov roj teeb nrog cov roj teeb NiMH rechargeable ntawm tib qhov loj. Txawm li cas los xij, txawm tias thaum lub roj teeb rov qab tau them tag nrho, lawv yuav tsis ncav cuag voltage ntawm cov roj teeb alkaline, thiab lub roj teeb qhia yuav tshwm sim li or .
• Voltage rau kev ua haujlwm raug yog 3 mus rau 4.5V rau alkaline roj teeb thiab 3.6V rau cov roj teeb rov qab. Hauv qab 3V, lub ntsuas ntsuas nres ntsuas thiab qhia cov lus BAt.
• Lub roj teeb lub neej (nrog rau kev sib txuas ntawm Bluetooth deactivated) yog:
• standby hom: 500 teev
• hom kaw: 3 xyoos ntawm tus nqi ntawm ib qho kev ntsuas txhua 15 feeb
• Cov cuab yeej tseem tuaj yeem siv tau los ntawm micro USB cable, txuas nrog lub khoos phis tawj lossis phab ntsa hluav taws xob adapter.

Ib puag ncig tej yam kev mob
Rau siv sab hauv tsev thiab sab nraum zoov.

• Kev khiav hauj lwm ntau: +14 txog +140 ° F (-10 txog 60 ° C) thiab 10 txog 90% RH yam tsis muaj condensation
• Cia ntau yam: -4 txog +158 ° F (-20 txog +70 ° C) thiab 10 txog 95% RH yam tsis muaj condensation, tsis muaj roj teeb
• Qhov siab: <6562 '(2000m), thiab 32,808' (10,000m) nyob rau hauv cia
• Pollution degree: 2

Mechanical Specifications

• Qhov Loj (L x W x H): 5.91 x 2.83 x 1.26 "(150 x 72 x 32mm)
• Loj: 9.17oz (260g) approx.
• Ingress tiv thaiv: IP 50, nrog rau USB connector kaw, raws li IEC 60 529
• Poob tej kev sim: 3.28' (1m) rau IEC 61010-1

Ua raws li International Standards
Qhov ntsuas tau ua raws li tus qauv IEC 61010-1.

Electromagnetic Compatibility (CEM)

• Qhov ntsuas tau ua raws li tus qauv IEC 61326-1.
• Cov cuab yeej tsis cuam tshuam los ntawm hluav taws xob electromagnetic. Txawm li cas los xij, cov sensors rau Cov Qauv 1821 thiab 1822 tuaj yeem cuam tshuam, vim lawv cov duab hlau. Qhov no tuaj yeem ua rau lawv ua haujlwm raws li cov kav hlau txais xov muaj peev xwm tau txais hluav taws xob hluav taws xob hluav taws xob thiab cuam tshuam rau kev ntsuas.

Kev kho mob

Tsuas yog cov roj teeb, cov cuab yeej tsis muaj cov khoom uas tuaj yeem hloov tau los ntawm cov neeg ua haujlwm uas tsis tau txais kev cob qhia tshwj xeeb thiab kev lees paub. Ib qho kev kho tsis tau tso cai lossis hloov ib feem los ntawm "sib npaug" tuaj yeem ua rau muaj kev nyab xeeb loj heev.

Ntxuav

• Disconnect lub ntsuas los ntawm tag nrho cov sensors, cable, thiab lwm yam thiab tig nws.
• Siv daim ntaub mos, damptau nrog dej soapy. Yaug nrog adamp ntaub thiab qhuav sai nrog ib daim ntaub qhuav los yog yuam cua. Tsis txhob siv cawv, kuab tshuaj, lossis hydrocarbons.

Kev tu

• Muab lub hau tiv thaiv ntawm lub sensor thaum lub ntsuas ntsuas tsis siv.
• Khaws cov cuab yeej rau hauv qhov chaw qhuav thiab qhov kub thiab txias.

Hloov roj teeb

• Cov lub cim qhia tias lub roj teeb tseem tshuav. Thaum lub cim yog khoob, tag nrho cov roj teeb yuav tsum tau hloov (saib §1.1).
• Cov roj teeb uas siv lawm yuav tsum tsis txhob muab pov tseg raws li cov khoom pov tseg hauv tsev. Coj lawv mus rau qhov chaw tsim nyog rov ua dua tshiab.

Firmware Update
AEMC tuaj yeem hloov kho lub ntsuas ntsuas lub firmware ib ntus. Cov kev hloov tshiab muaj rau rub tawm dawb. Txhawm rau txheeb xyuas qhov hloov tshiab:

1. Txuas cov cuab yeej mus rau Cov Ntaub Ntawv Logger Tswj Vaj Huam Sib Luag.
2. Nyem Pab.
3. Nyem Hloov tshiab. Yog tias lub cuab yeej siv lub firmware tshiab, cov lus tshwm tuaj qhia koj txog qhov no.Yog tias muaj kev hloov tshiab, nplooj ntawv AEMC Download yuav qhib. Ua raws li cov lus qhia hauv nplooj ntawv no txhawm rau rub tawm qhov hloov tshiab.

Tom qab hloov kho firmware, tej zaum nws yuav tsim nyog los kho qhov ntsuas (saib §2).

Kho thiab calibration

Txhawm rau kom ntseeg tau tias koj cov cuab yeej ua tau raws li lub Hoobkas tshwj xeeb, peb xav kom nws yuav tsum tau teem sijhawm xa rov qab mus rau peb lub Hoobkas Chaw Pabcuam ntawm ib xyoos rau kev rov ua dua, lossis raws li xav tau los ntawm lwm cov qauv lossis cov txheej txheem sab hauv.
Rau cov cuab yeej kho thiab calibration
Koj yuav tsum hu rau peb Lub Chaw Pabcuam rau Tus Neeg Siv Khoom Kev Tso Cai Tus Naj Npawb (CSA#). Qhov no yuav ua kom ntseeg tau tias thaum koj cov cuab yeej tuaj txog, nws yuav raug taug qab thiab ua tiav sai. Thov sau CSA# rau sab nraum lub thawv xa khoom. Yog tias qhov ntsuas tau xa rov qab rau kev ntsuas ntsuas, peb yuav tsum paub yog tias koj xav tau tus qauv calibration lossis calibration traceable rau NIST (nrog rau daim ntawv pov thawj calibration ntxiv rau cov ntaub ntawv calibration kaw).

Rau North / Central / South America, Australia thiab New Zealand

• Nkoj Rau: Chauvin Arnoux®, Inc. dba AEMC® Instruments
• 15 Faraday Drive • Dover, NH 03820 USA
• Xov tooj: 800-945-2362 Ib (Ext. 360)
• (603) 749-6434 (Tshooj 360)
• Tus Fax: (603) 742-2346 603-749-6309 Ib
• E-mail: kho@aemc.com.

(Lossis hu rau koj tus neeg muab khoom tso cai.) Cov nqi kho mob, kev ntsuas tus qauv, thiab kev ntsuas qhov ntsuas tau raws li NIST muaj.
CEEB TOOM: Koj yuav tsum tau txais CSA # ua ntej xa cov twj paj nruag.

TECHNICAL THIAB SAIB XYUAS

• Yog tias koj tab tom ntsib teeb meem kev lag luam, lossis xav tau kev pab cuam nrog kev ua haujlwm zoo lossis kev thov ntawm koj lub cuab yeej, thov hu rau, fax, lossis e-mail peb pab pawg txhawb nqa:
• Hu rau: Chauvin Arnoux®, Inc. dba AEMC® Instruments Xov tooj: 800-945-2362 Ib (Ext. 351) • 603-749-6434 Ib (Ext. 351)
• Fax: 603-742-2346 Ib
• E-mail: techsupport@aemc.com.

LIMITED Warranty

Koj cov cuab yeej AEMC tau lees paub rau tus tswv rau lub sijhawm ob xyoos txij li hnub ntawm kev yuav khoom qub tiv thaiv qhov tsis xws luag hauv kev tsim khoom. Qhov kev txwv txwv no yog muab los ntawm AEMC® Instruments, tsis yog los ntawm tus muag khoom los ntawm tus neeg yuav khoom. Qhov kev lees paub no tsis muaj dab tsi yog tias chav tsev tau tampered nrog, raug tsim txom, lossis yog qhov tsis xws luag cuam tshuam nrog kev pabcuam tsis ua los ntawm AEMC® Instruments. Tag nrho warranty kev pab them nqi thiab cov khoom sau npe muaj nyob rau ntawm peb webqhov chaw ntawm:  www.aemc.com/warranty.html. Thov luam cov ntaub ntawv Warranty Coverage Online rau koj cov ntaub ntawv.

Dab tsi AEMC® Instruments yuav ua
Yog tias muaj teeb meem tshwm sim nyob rau hauv lub sijhawm lav, koj tuaj yeem xa rov qab cov cuab yeej rau peb kho, yog tias peb muaj koj cov ntaub ntawv pov thawj rau npe ntawm file los yog daim ntawv pov thawj ntawm kev yuav khoom. AEMC® Instruments yuav, ntawm nws qhov kev xaiv, kho lossis hloov cov khoom tsis raug.
Warranty Kho
Koj yuav tsum ua dab tsi kom rov qab tau cov cuab yeej rau Warranty Repair: Ua ntej, thov tus Neeg Siv Khoom Tso Cai Naj Npawb (CSA#) hauv xov tooj lossis fax los ntawm peb Lub Chaw Haujlwm Pabcuam (saib qhov chaw nyob hauv qab), tom qab ntawd xa cov cuab yeej nrog rau daim ntawv CSA kos npe. Thov sau CSA# rau sab nraum lub thawv xa khoom. Rov qab instrument, postage lossis khoom xa tuaj ua ntej them rau:

• Nkoj Rau: Chauvin Arnoux®, Inc. dba AEMC® Instruments
• 15 Faraday Drive • Dover, NH 03820 USA
• Xov tooj: 800-945-2362 Ib (Ext. 360)
• (603) 749-6434 (Tshooj 360)
• Tus Fax: (603) 742-2346 603-749-6309 Ib
• E-mail: kho@aemc.com.

Ceev faj: Txhawm rau tiv thaiv koj tus kheej tiv thaiv kev poob hauv kev thauj mus los, peb xav kom koj pov hwm koj cov khoom xa rov qab.
CEEB TOOM: Koj yuav tsum tau txais CSA # ua ntej xa cov twj paj nruag.

Chauvin Arnoux®, Inc. dba AEMC® Instruments

• 15 Faraday Drive • Dover, NH 03820 USA • Xov tooj: 603-749-6434 Ib • Fax: 603-742-2346 Ib
• www.aemc.com.

Cov ntaub ntawv / Cov ntaub ntawv

AEMC INSTRUMENTS 1821 Thermometer Data Logger [ua pdf] Tus neeg siv phau ntawv 1821, 1822, 1823, 1821 Thermometer Data Logger, Thermometer Data Logger, Data Logger, Logger

Cov ntaub ntawv

• Cov neeg siv phau ntawv