AEMC INSTRUMENTS 1821 Thermometer Data Logger

Bayanin Biyayya

Chauvin Arnoux®, Inc. dba AEMC® Instruments yana ba da tabbacin cewa an ƙirƙira wannan kayan aikin ta amfani da ma'auni da kayan aikin da aka gano zuwa ƙa'idodin ƙasashen duniya.
Muna ba da tabbacin cewa a lokacin jigilar kaya kayan aikinku sun cika ƙayyadaddun bayanan da aka buga.
Ana iya neman takardar shaidar ganowa ta NIST a lokacin siye, ko samu ta hanyar mayar da kayan aikin zuwa wurin gyarawa da wurin daidaitawa, don farashi na ƙima.
Shawarar tazarar daidaitawa don wannan kayan aikin shine watanni 12 kuma yana farawa akan ranar da abokin ciniki ya karɓi. Don sake daidaitawa, da fatan za a yi amfani da sabis na daidaitawa. Koma zuwa sashin gyarawa da daidaitawa a www.aemc.com.

• Serial #:…………………………………………………………………………………………………………
• Catalog #:…………………………………………………………………………………………………
• Misali #:………………………………………………………………………………………………….
• Da fatan za a cika kwanan watan da ya dace kamar yadda aka nuna:…………………………………
• Kwanan Watan Da Aka Samu:…………………………………………………………………………………………
• Ƙayyadaddun kwanan wata:…………………………………………………………………………

Na gode don siyan Model 1821 ko Model 1822 ma'aunin ma'aunin zafi da sanyio, ko Model 1823 juriya na ma'aunin zafi da sanyio. Don kyakkyawan sakamako daga kayan aikin ku:
karanta waɗannan umarnin aiki a hankali
bi kariyar don amfani

• GARGADI, kasadar HADARI! Dole ne mai aiki ya koma ga waɗannan umarnin a duk lokacin da wannan alamar haɗari ta bayyana.
• Bayani ko shawarwari masu amfani.
• Baturi
• Magnet
• An ayyana samfurin a sake yin amfani da shi bayan nazarin yanayin rayuwarsa daidai da ma'aunin ISO14040.
• AEMC ta ɗauki tsarin Eco-Design don tsara wannan kayan aikin. Binciken cikakken yanayin rayuwa ya ba mu damar sarrafawa da haɓaka tasirin samfurin akan muhalli. Musamman wannan na'urar ta zarce ka'idoji game da sake amfani da su da sake amfani da su.
• Yana nuna daidaituwa tare da umarnin Turai kuma tare da ƙa'idodi da suka shafi EMC.
• Yana nuna cewa, a cikin Tarayyar Turai, dole ne a zubar da kayan aiki bisa ga umarnin WEEE 2002/96/EC. Wannan kayan aikin ba dole ba ne a dauki shi azaman sharar gida.

Matakan kariya

Wannan kayan aikin ya dace da ma'aunin aminci IEC 61010-2-030, don voltages har zuwa 5V dangane da ƙasa. Rashin kiyaye waɗannan umarnin aminci na iya haifar da girgiza wutar lantarki, wuta, fashewa, da lalacewa ga kayan aiki da/ko shigarwar da yake ciki.

• Dole ne mai aiki da/ko mai alhakin ya karanta a hankali kuma su fahimci duk matakan kariya da za a yi amfani da su. Cikakken sani da sanin hatsarori na lantarki suna da mahimmanci yayin amfani da wannan kayan aikin.
• Kula da yanayin amfani, gami da zafin jiki, danshi mai dangi, tsayi, matakin ƙazanta, da wurin amfani.
• Kada kayi amfani da kayan aiki idan ya bayyana lalacewa, bai cika ba, ko kuma mara kyau a rufe.
• Kafin kowane amfani, duba yanayin mahalli da na'urorin haɗi. Duk wani abu da abin rufe fuska ya lalace (ko da wani bangare) dole ne a ware shi don gyarawa ko gogewa.
• Kar a ɗauki ma'auni a kan ƴan madugu marasa rai. Yi amfani da firikwensin da ba na lamba ba ko kuma keɓaɓɓen firikwensin.
• Koyaushe sanya kayan kariya na sirri (PPE), musamman safofin hannu masu rufewa, idan akwai shakka game da voltage matakan da aka haɗa firikwensin zafin jiki.
• Dole ne a gudanar da duk binciken matsala da binciken yanayin awo ta hanyar ƙwararrun ma'aikata, ƙwararrun ma'aikata.

Karbar Kayan Ka
Bayan karɓar jigilar kaya, tabbatar da cewa abubuwan da ke ciki sun yi daidai da lissafin tattarawa. Sanar da mai rarraba ku duk wani abu da ya ɓace. Idan kayan aikin ya bayyana sun lalace, file da'awar nan da nan tare da mai ɗauka kuma sanar da mai rarraba ku a lokaci ɗaya, ba da cikakken bayanin kowane lalacewa. Ajiye kwandon da aka lalace don tabbatar da da'awar ku.
Bayanin oda

• Samfurin Logger Data Logger Thermocouple 1821……………………………………………………………………………. #2121.74
• Ya haɗa da jaka mai laushi, baturan alkaline AA uku, kebul na USB 6 ft. (1.8m), Nau'in thermocouple K guda, jagorar farawa mai sauri, Kebul na babban yatsan yatsa tare da BayanaiView® software da littafin mai amfani.
• Samfurin Logger Data Logger Thermocouple 1822…………………………………………………………………………………. Cat. #2121.75
• Ya haɗa da jaka mai laushi, baturan alkaline AA uku, kebul na USB 6 ft. (1.8m), nau'in thermocouple K guda biyu, jagorar farawa mai sauri, USB-drive tare da BayanaiView® software da littafin mai amfani.
• Samfurin Logger Data Logger na RTD 1823…………………………………………………………………………………………. #2121.76
• Ya haɗa da jaka mai laushi, batirin alkaline AA uku, kebul na USB ft 6, RTD mai sassauƙa guda 3, jagorar farawa mai sauri, Kebul ɗin babban yatsan yatsa tare da BayanaiView® software da littafin mai amfani.

Sassan Sauyawa

• Thermocouple - Mai Sauƙi (1M), Nau'in K, -58 zuwa 480 °F (-50 zuwa 249 °C)………………………………………………. Cat. #2126.47
• Kebul - Sauyawa 6 ft. (1.8m) USB……………………………………………………………………………………………………………………….Cat. #2138.66
• Aljihu - Aljihu Mai ɗaukar Maye gurbin………………………………………………………………………………………………………………………………….. Cat. #2154.71
• 3-Prong Mini Flat Pin Connector don RTD ………………………………………………………………………………………………………… Cat. #5000.82

Na'urorin haɗi

• Multifix Universal Hawa Tsarin …………………………………………………………………………………………………………………………….Cat. #5000.44
• Adafta – US bango Plug zuwa USB………………………………………………………………………………………………………………………………………….. Cat. #2153.78
• Gidajen Hujja na Shock………………………………………………………………………………………………………………………………………………………….. Cat. #2122.31
• Case - Babban Manufar Dauke Case …………………………………………………………………………………………………………………………………….Cat. #2118.09
• Thermocouple – Allura, 7.25 x 0.5” K Nau'in, -58° zuwa 1292 °F …………………………………………………………………………………. Cat. #2126.46
• Don na'urorin haɗi da kayan maye, ziyarci mu website: www.aemc.com.

FARAWA

Shigar da baturi

Kayan aiki yana karɓar batura AA ko LR6 alkaline guda uku.

1. "Tear-drop" daraja don rataya kayan aiki
2. Kushin da ba skid ba
3. Magnets don hawa zuwa saman ƙarfe
4. Murfin sashin baturi

Don canza batura:

1. Danna shafin murfin murfin baturin kuma dauke shi a sarari.
2. Cire murfin ɗakin baturi.
3. Saka sabbin batura, yana tabbatar da daidaiton polarity.
4. Rufe murfin sashin baturi; tabbatar da an rufe shi gaba daya kuma daidai.

Kayan Aikin Gaban Gaba

Model 1821 da 1822

1. T1 shigar da thermocouple
2. T2 shigar da thermocouple
3. LCD na baya
4. faifan maɓalli
5. Maɓallin ON / KASHE
6. Nau'in B micro-USB connector

Model 1823

1. Shigar da bincike na RTD
2. LCD na baya
3. faifan maɓalli
4. Maɓallin ON / KASHE
5. Nau'in B micro-USB connector

Ayyukan Kayan aiki

• Model 1821 da 1822 sune ma'aunin zafi da sanyio na tushen ma'aunin zafi da sanyio tare da tashoshi ɗaya da biyu, bi da bi. Suna aiki tare da nau'ikan firikwensin K (Chromel / Alumel), J (iron / Constantan), T (jan karfe / Constantan), E (Chromel / Constantan), N (Nicrosil / Nisil), R (platinum-rhodium / platinum), da S (platinum-rhodium/platinum) kuma yana iya auna yanayin zafi daga -418 zuwa +3213°F (-250 zuwa +1767°C) dangane da firikwensin.
• Model 1823 shine ma'aunin zafi da sanyio mai juriya-bincike mai tashar tashoshi ɗaya (RTD100 ko RTD1000). Yana auna yanayin zafi daga -148 zuwa +752°F (-100 zuwa +400°C).

Waɗannan kayan aikin na tsaye kaɗai zasu iya

• Nuna ma'aunin zafin jiki a °C ko °F
• Yi rikodin mafi ƙanƙanta da matsakaicin yanayin zafi a cikin ƙayyadadden lokaci
• Yi rikodin kuma adana ma'auni
• Sadarwa tare da kwamfuta ta Bluetooth ko kebul na USB

BayanaiView® tare da Data Logger Control Panel za a iya shigar da software akan kwamfuta don ba ku damar daidaita kayan aikin, view ma'auni a cikin ainihin lokaci, zazzage bayanai daga kayan aikin, da ƙirƙirar rahotanni.

Kunna / KASHE Kayan aikin

• A: Danna maɓallin button don> 2 seconds.
• KASHE: Danna maɓallin maɓallin don> 2 seconds lokacin da kayan aiki ke kunne. Lura cewa ba za ka iya kashe kayan aikin ba lokacin da yake cikin HOLD ko yanayin rikodi.

Idan allon hagu ya bayyana yayin farawa, ana ci gaba da yin rikodi a ƙarshen lokacin da aka kashe kayan aikin. Wannan allon yana nuna kayan aikin yana adana bayanan da aka yi rikodi.
Kar a kashe kayan aiki yayin da wannan allon yake nunawa; in ba haka ba, bayanan da aka yi rikodin za su ɓace.

Maɓallin Aiki

Maɓalli	Aiki
	(Model 1821 da 1823) Canza tsakanin °C da °F.
	(Misali 1822) Gajerun latsa maɓalli tsakanin T2 da T1-T2. Dogon danna (> 2 seconds) yana juyawa tsakanin °C da °F.
	Shortan latsa yana adana awo da kwanan wata/lokaci a cikin ƙwaƙwalwar kayan aiki. Yanayin MAP: yana ƙara ma'auni zuwa ma'auni a cikin MAP (§3.1.3). Dogon danna yana farawa/tsaya zaman rikodi.
	Shortan latsa yana kunna hasken baya. Dogon latsawa: (Model 1821 da 1822) yana zaɓar nau'in thermocouple (K, J, T, E, N, R, S) (Model 1823) masu juyawa tsakanin PT100 da PT1000 bincike
	Shortan latsawa yana daskare nunin. Dogon latsa yana kunna / yana kashe Bluetooth.
MAX MIN	Shortan latsa yana shiga yanayin MAX MIN; Ana ci gaba da nuna ƙimar ma'auni. Latsa na biyu yana nuna matsakaicin ƙimar. Latsa na uku yana nuna mafi ƙarancin ƙima. Latsa na huɗu yana komawa zuwa aikin aunawa na yau da kullun. Dogon danna yana fita yanayin MAX MIN.

Nunawa

• – – – – yana nuna na’urori masu auna firikwensin ko bincike ba a haɗa su ba.
• yana nuna ma'aunin ya wuce iyakokin kayan aiki (mai kyau ko mara kyau). yana nuna an kashe Auto Off. Wannan yana faruwa lokacin da kayan aikin shine:
• yin rikodi
• a cikin MAX MIN ko yanayin HOLD
• an haɗa ta kebul na USB zuwa wutar lantarki ta waje ko kwamfuta
• sadarwa ta Bluetooth
• saita zuwa kashewa ta atomatik (duba §2.4).

SATA

Kafin amfani da kayan aikin ku, dole ne ku saita kwanan wata da lokacin sa. Idan kuna shirin amfani da ƙararrawa, dole ne ku ayyana madaidaicin ƙararrawa. Dole ne a saita saitunan kwanan wata/lokaci da ƙararrawa ta hanyar BayanaiView. Sauran ayyukan saitin asali sun haɗa da zaɓi:

• °F ko °C don ma'aunin raka'a (ana iya yin shi akan kayan aiki ko ta DataView)
• Tazarar KASHE ta atomatik (yana buƙatar BayanaiView)
• (Model 1821 da 1822) Nau'in Sensor (ana iya yin shi akan kayan aiki ko ta DataView)

BayanaiView Shigarwa

1. Saka kebul na USB wanda ya zo tare da kayan aiki a cikin tashar USB akan kwamfutarka.
2. Idan an kunna Autorun, taga AutoPlay yana bayyana akan allonku. Danna "Buɗe babban fayil zuwa view files" don nuna bayananView babban fayil. Idan ba a kunna Autorun ko ba a yarda ba, yi amfani da Windows Explorer don gano wuri da buɗe kebul ɗin kebul ɗin mai lakabin “DataView.”
3. Lokacin DataView babban fayil yana buɗe, nemo file Setup.exe kuma danna sau biyu.
4. Allon saitin yana bayyana. Wannan yana ba ku damar zaɓar nau'in Bayanai na harsheView don shigarwa. Hakanan zaka iya zaɓar ƙarin zaɓuɓɓukan shigarwa (an yi bayanin kowane zaɓi a cikin filin Bayani). Yi zaɓinku kuma danna Shigar.
5. Allon Wizard InstallShield yana bayyana. Wannan shirin yana jagorantar ku ta hanyar DataView shigar da tsari. Yayin da kake kammala waɗannan allon, tabbatar da duba Data Loggers lokacin da aka sa ka zaɓi fasalulluka don shigarwa.
6. Lokacin da InstallShield Wizard ya gama shigar da DataView, allon saiti ya bayyana. Danna Fita don rufewa. BayananView babban fayil yana bayyana akan tebur ɗin kwamfutarka.

Haɗa Kayan aiki zuwa Kwamfuta
Zaka iya haɗa kayan aiki zuwa kwamfuta ta hanyar kebul na USB (wanda aka samar da kayan aiki) ko Bluetooth®. Matakan farko guda biyu na hanyar haɗin sun dogara da nau'in haɗin kai:

USB

1. Haɗa kayan aikin zuwa tashar USB da ake samuwa ta amfani da kebul ɗin da aka kawo.
2. Kunna kayan aiki. Idan wannan shine karo na farko da aka haɗa wannan kayan aikin zuwa wannan kwamfutar, za a shigar da direbobi. Jira shigarwar direba don gamawa kafin ci gaba da mataki na 3 a ƙasa.

Bluetooth: Haɗin kayan aikin ta Bluetooth yana buƙatar Bluegiga BLED112 Smart Dongle (sayar da ita daban) shigar a cikin kwamfutarka. Lokacin da aka shigar da dongle, yi abubuwa masu zuwa:

1. Kunna kayan aiki ta latsa maɓallin maballin.
2. Kunna Bluetooth akan kayan aiki ta latsa maɓallin button har zuwa Alamar tana bayyana a cikin LCD.
   Bayan an haɗa kebul na USB ko an kunna Bluetooth, ci gaba kamar haka:
3. Bude DataView babban fayil akan tebur ɗinku. Wannan yana nuna jerin gumakan da aka shigar tare da BayanaiView.
4. Bude DataView Cibiyar Kula da Logger Data ta danna maɓallin ikon.
5. A cikin mashaya menu a saman allon, zaɓi Taimako. A cikin menu mai saukarwa da ya bayyana, danna zaɓin Taimakon Taimako. Wannan yana buɗe tsarin Taimakon Taimakon Gudanar da Logger Data.
6. Yi amfani da taga abubuwan da ke ciki a tsarin Taimako don gano wuri da buɗe taken "Haɗa zuwa Kayan aiki." Wannan yana ba da umarnin bayanin yadda ake haɗa kayan aikin ku zuwa kwamfutar.
7. Lokacin da aka haɗa kayan aikin, sunanta yana bayyana a cikin babban fayil ɗin Data Logger Network a gefen hagu na Control Panel. Alamar rajistan koren yana bayyana kusa da sunan da ke nuna an haɗa shi a halin yanzu.

Kwanan wata/Lokacin Kayan aiki

1. Zaɓi kayan aikin a cikin Cibiyar Sadarwar Bayanai.
2. A cikin mashaya menu, zaɓi Kayan aiki. A cikin menu mai saukewa wanda ya bayyana, danna Saita Clock.
3. Akwatin maganganu na Kwanan wata/Lokaci ya bayyana. Kammala filayen cikin wannan akwatin maganganu. Idan kuna buƙatar taimako, danna F1.
4. Lokacin da kuka gama saita kwanan wata da lokaci, danna Ok don adana canje-canjenku zuwa kayan aikin.

KASHE KANKA

• Ta hanyar tsoho, kayan aikin yana kashe ta atomatik bayan mintuna 3 na rashin aiki. Kuna iya amfani da Cibiyar Kula da Logger Data don canza tazarar KASHE ta atomatik, ko kuma musaki wannan fasalin, kamar yadda Taimakon da ke zuwa tare da software ya umarta.
• Lokacin da aka kashe ta atomatik, alamar ya bayyana a allon LCD na kayan aiki.

Raka'a Ma'auni

• Maɓallin kan gaban kayan aikin yana ba ka damar juyawa tsakanin °C da °F don raka'o'in aunawa. Hakanan zaka iya saita wannan ta Cibiyar Kula da Logger Data.

Ƙararrawa

• Kuna iya tsara matakan ƙararrawa akan kowane tashoshi na auna ta amfani da BayanaiView Kwamitin Kula da Logger Data.
• Don bayani game da amfani da ƙararrawa duba §3.4.

Nau'in Sensor

• Samfuran 1821 da 1822 suna buƙatar ka zaɓi nau'in firikwensin (K, J, T, E, N, R, ko S) da aka yi amfani da su tare da kayan aiki. Kuna iya yin wannan akan kayan aiki, ko ta hanyar DataView. (Lura cewa Model 1823 yana gano nau'in firikwensin ta atomatik lokacin da kuka shigar da firikwensin.)

Kayan aiki

1. Latsa ka riƙe ƙasa maɓallin Type. Bayan wasu 'yan lokuta mai nuna nau'in firikwensin a kasan LCD yana fara hawan keke ta wurin zaɓin da ake da su.
2. Lokacin da nau'in firikwensin da ake so ya bayyana, saki maɓallin Type.

BayanaiView

1. Danna shafin ma'aunin zafi da sanyio a cikin akwatin maganganu Sanya kayan aiki. Wannan yana nuna jerin samuwa nau'ikan firikwensin.
2. Zaɓi nau'in da ake so, kuma danna Ok don adana canje-canjenku.

AIKI TSAYE

Na'urorin na iya aiki ta hanyoyi biyu:

• Yanayin tsaye, wanda aka kwatanta a wannan sashe
• Yanayin nesa, wanda kwamfutar ke sarrafa kayan aikin ta hanyar sarrafa bayanaiView (duba §4)

Shigar da Sensor

• Kayan aikin yana karɓar firikwensin guda ɗaya ko biyu, ya danganta da ƙira:
• Model 1821: Haɗa thermocouple ɗaya.
• Model 1822: Haɗa ɗaya ko biyu thermocouples iri ɗaya.
• Model 1823: gama daya RTD100 ko RTD1000 bincike.

Tabbatar da daidaiton polarity lokacin shigar da firikwensin.

• Samfuran 1821 da 1822 sun karɓi ma'aunin zafi da sanyio nau'in K, J, T, E, N, R, ko S.
• Model 1821 na iya haɗawa zuwa thermocouple ɗaya, da Model 1822 zuwa biyu. Lokacin amfani da Model 1822 tare da thermocouples biyu, duka biyu dole ne su kasance nau'in iri ɗaya.
• Fil na masu haɗin thermocouple na maza an yi su ne da kayan da aka biya diyya waɗanda (ko da yake sun bambanta da na thermocouple) suna ba da emf iri ɗaya a cikin kewayon zafin amfani.
• Ma'aunin zafin jiki akan tashoshi yana tabbatar da diyya ta junction sanyi ta atomatik.
• Bayan shigar da firikwensin (s) a cikin Model 1821 ko 1822, latsa ka riƙe ƙasa maballin. Yayin da kake riƙe maɓallin ƙasa, LCD yana zagayawa ta cikin jerin nau'ikan thermocouple da ake samu. Lokacin da aka nuna daidai nau'in, saki maballin.
• Model 1823 yana gano nau'in bincike ta atomatik (PT100 da PT1000).

Yin Ma'auni
Idan kayan aikin ya KASHE, danna ka riƙe ƙasa button har sai ya kunna. Kayan aiki yana nuna lokacin yanzu, sannan aunawa (s).

Jira nuni ya daidaita kafin karanta ma'aunin.

Bambancin Zazzabi (Model 1822)

• Lokacin da aka haɗa Model 1822 zuwa na'urori masu auna firikwensin guda biyu, yana nuna ma'auni biyu, tare da T1 a ƙasa da T2 a saman (duba hoton da ke sama). Kuna iya nuna bambanci tsakanin ma'aunin firikwensin ta latsa maɓallin maballin. Ana maye gurbin ma'aunin T2 da bambancin zafin jiki, mai lakabi T1-T2. Latsa na biyu na yana mayar da ma'aunin T2.

Yanayin MAX-MIN
Kuna iya saka idanu mafi girma da mafi ƙarancin ma'auni ta latsa maɓallin MAX MIN. Wannan yana nuna kalmomin MIN MAX a saman nunin (duba ƙasa). A cikin wannan yanayin, danna MAX MIN sau ɗaya yana nuna matsakaicin ƙimar da aka auna yayin zaman na yanzu. Latsa na biyu yana nuna ƙaramin ƙima, kuma na uku yana dawo da nuni na yau da kullun. Latsa MAX MIN na gaba suna maimaita wannan sake zagayowar.

• Don fita yanayin MAX MIN, danna maɓallin MAX MIN na> 2 seconds.
• Lura cewa lokacin amfani da Model 1822 a cikin yanayin MAX MIN, da button an kashe

RIKE
A cikin aiki na yau da kullun, nuni yana sabunta ma'auni a ainihin lokacin. Danna maɓallin HOLD yana "daskare" ma'aunin na yanzu kuma yana hana nuni daga ɗaukakawa. Danna HOLD a karo na biyu "yana cire" nunin.

Ma'aunin Rikodi
Kuna iya farawa da dakatar da zaman rikodi akan kayan aiki. Ana adana bayanan da aka yi rikodi a cikin ƙwaƙwalwar kayan aiki, kuma ana iya saukewa kuma viewed a kan kwamfutar da ke gudanar da DataView Kwamitin Kula da Logger Data.

• Kuna iya rikodin bayanai ta danna maɓallin maballin:
• Wani ɗan gajeren latsa (MEM) yana rikodin ma'aunin (s) na yanzu da kwanan wata.
• Dogon latsa (REC) yana fara zaman rikodi. Yayin da ake yin rikodi, alamar REC tana bayyana a saman nunin. Dogon latsa na biyu na yana dakatar da zaman rikodi. Lura cewa yayin da kayan aiki ke yin rikodi, ɗan gajeren latsa na ba shi da tasiri.
• Don tsara lokutan rikodi, da zazzagewa da view rubuta bayanai, tuntuɓi DataView Taimakon Kwamitin Kula da Logger Data (§4).

Ala rms
Kuna iya tsara matakan ƙararrawa akan kowace tashar aunawa ta DataView Kwamitin Kula da Logger Data. A cikin keɓantaccen yanayi, idan an tsara matakin ƙararrawa, da an nuna alamar. Lokacin da aka ketare ƙofa, da Alama tana kiftawa, kuma ɗaya daga cikin alamomin kyaftawa masu zuwa yana bayyana a hannun dama na ma'aunin:

• yana nuna ma'aunin yana sama da babban kofa.
• yana nuna ma'aunin yana ƙasa da ƙananan kofa.
• yana nuna ma'aunin yana tsakanin mashigin biyu.

Kurakurai
Kayan aikin yana gano kurakurai kuma yana nuna su a cikin sigar Er.XX:

• Er.01 Hardware an gano matsala. Dole ne a aika da kayan aiki don gyarawa.
• Er.02 Kuskuren ƙwaƙwalwar ajiya na BI. Haɗa kayan aikin zuwa kwamfuta ta kebul na USB kuma tsara ƙwaƙwalwar ajiyar ta ta amfani da Windows.
• Er.03 Hardware an gano matsala. Dole ne a aika da kayan aiki don gyarawa.
• Er.10 Ba a daidaita kayan aikin daidai ba. Dole ne a aika kayan aiki zuwa sabis na abokin ciniki.
• Er.11 Firmware bai dace da kayan aiki ba. Sanya firmware daidai (duba §6.4).
• Er.12 Sigar firmware bai dace da kayan aiki ba. Sake shigar da sigar firmware ta baya.
• Er.13 Kuskuren tsara rikodi. Tabbatar cewa lokacin kayan aiki da lokacin BayananView Kwamitin Kula da Logger Data iri ɗaya ne (duba §2.3).

DATAVIEW

Kamar yadda aka bayyana a cikin §2, DataViewAna buƙatar ® don aiwatar da ayyukan saiti da yawa waɗanda suka haɗa da haɗa kayan aiki zuwa kwamfuta, saita lokaci da kwanan wata akan kayan aikin, da canza saitin KASHE Auto. Bugu da kari, DataView ba ka damar:

• Sanya da tsara zaman rikodi akan kayan aiki.
• Zazzage bayanan da aka yi rikodi daga kayan aiki zuwa kwamfuta.
• Ƙirƙirar rahotanni daga bayanan da aka sauke.
• View ma'aunin kayan aiki a ainihin lokacin akan kwamfutar.

Don bayani game da yin waɗannan ayyuka, tuntuɓi BayananView Taimakon Taimakon Ƙimar Logger Data.

HALAYEN FASAHA

Yanayin Nuna

Yawan tasiri	Abubuwan bincike
Zazzabi	73 ± 3.6°F (23 ± 2°C)
Dangi zafi	45% zuwa 75%
Ƙarar voltage	3 zuwa 4.5v
Wurin lantarki	<1V/m
Filin maganadisu	<40A/m

Rashin tabbas na ciki shine kuskuren da aka ƙayyade don yanayin tunani.

• θ= zafin jiki
• R = karatu

Ƙimar Lantarki

• Model 1821 da 1822
• Ma'aunin Zazzabi

Nau'in thermocouple	J, K, T, N, E, R, S
Ƙayyadadden kewayon ma'auni (bisa ga nau'in thermocouple da aka yi amfani da shi)	J: -346 zuwa +2192°F (-210 zuwa +1200°C) K: -328 zuwa +2501°F (-200 zuwa +1372°C) T: -328 zuwa +752°F (-200 zuwa + 400°C) N: -328 zuwa +2372°F (-200 zuwa +1300°C) E: -238 zuwa +1742°F (-150 zuwa +950°C) R: +32 zuwa +3212°F ( 0 zuwa +1767°C) S: +32 zuwa +3212°F (0 zuwa +1767°C)
Ƙaddamarwa	°F: q <1000°F: 0.1°F da q ³ 1000°F: 1°F °C: q <1000°C: 0.1°C da q ³ 1000°C: 1°C
Rashin tabbas (J, K, T, N, E)	° F: q £ -148°F: ±(0.2% R ± 1.1°F) -148°F <q £ +212°F: ±(0.15% R ± 1.1°F) q > +212°F ±(0.1% R ± 1.1°F) °C: q £ -100°C: ±(0.2% R ± 0.6°C) -100°C <q £ +100°C: ±(0.15% R ± 0.6°C) q> +100°C: ±(0.1% R ± 0.6°C)
Rashin tabbas (R, S)	° F: q £ +212°F: ±(0.15% R ± 1.8°F) q: > +212°F: ±(0.1% R ± 1.8°F) °C: q £ +100°C: ±(0.15% R ± 1.0°C) q> +100°C: ±(0.1% R ± 1.0°C)

Tsufa na tunani na ciki voltage yana haifar da rashin tabbas ya karu:

• bayan sa'o'i 4000 na amfani tare da R da S thermocouples
• bayan 8000 hours tare da sauran thermocouples

Don Model 1821 da 1822, haɗa kayan aikin zuwa kwamfuta ta hanyar kebul na USB micro yana haifar da haɓakar zafin jiki na ciki a cikin kayan aikin wanda zai iya haifar da kuskuren auna zafin jiki kusan 2.7°F (1.5°C). Wannan tashin zafin ba ya faruwa a lokacin da aka haɗa kayan aiki zuwa mashin bango ko lokacin da batura ke aiki da shi.

Bambance-bambance tsakanin kewayon Amfani

Yawan tasiri	Yawan tasiri	Yawan tasiri	Tasiri
Zazzabi	+14 zuwa 140 ° F (-10 zuwa +60°C)	q	J: ± (0.02% R ± 0.27°F) / 18°F (± (0.02% R ± 0.15°C) / 10°C) K: ± (0.03% R ± 0.27°F) / 18°F (± (0.03% R ± 0.15°C) / 10°C) T: ± (0.03% R ± 0.27°F) / 18°F (± (0.03% R ± 0.15°C) / 10°C) E: ± ( 0.02% R ± 0.27°F) / 18°F (± (0.02% R ± 0.15°C) / 10°C) N: ± (0.035% R ± 0.27°F) / 18°F (± (0.035% R ± 0.15°C) / 10°C) R: ± (0.01% R ± 0.45°F) / 18°F (± (0.01% R ±)) /0.25°F (10% R ± 0.01°F) / 0.45°F (± (18% R ± 0.01°C) / 0.25°C)

Tsufa na tunani na ciki voltage yana haifar da rashin tabbas ya karu:

• bayan sa'o'i 4000 na amfani tare da R da S thermocouples
• bayan 8000 hours tare da sauran thermocouples

Don Model 1821 da 1822, haɗa kayan aikin zuwa kwamfuta ta hanyar kebul na USB micro yana haifar da haɓakar zafin jiki na ciki a cikin kayan aikin wanda zai iya haifar da kuskuren auna zafin jiki kusan 2.7°F (1.5°C). Wannan tashin zafin ba ya faruwa a lokacin da aka haɗa kayan aiki zuwa mashin bango ko lokacin da batura ke aiki da shi.

Lokacin Amsa
Lokacin amsawa shine lokacin da ake buƙata don emf ya kai kashi 63% na jimlar sa lokacin da thermocouple ya kasance ƙarƙashin matakin zafin jiki. Lokacin amsawar firikwensin ya dogara da ƙarfin zafi na matsakaici da kuma yanayin zafi na firikwensin. Lokacin amsawa na thermocouple tare da kyakkyawan yanayin zafi, wanda aka nutsar da shi a cikin matsakaicin matsakaicin ƙarfin zafi, zai zama gajere. Sabanin haka, a cikin iska ko wata matsakaiciyar zafi mara kyau, lokacin amsa na gaskiya zai iya zama sau 100 ko fiye fiye da lokacin amsawar thermocouple.

Model 1823

Ma'aunin Zazzabi

firikwensin zafin jiki	PT100 ya da PT1000
Ƙayyadadden kewayon awo	-148 zuwa + 752°F (-100 zuwa +400°C)
Ƙaddamarwa	0.1F (0.1°C)
Rashin tabbas na ciki	± (0.4% R ± 0.5°F) (± (0.4% R ± 0.3°C))

Don tantance jimillar rashin tabbas na ciki, ƙara rashin tabbas na binciken platinum zuwa na kayan aikin, wanda aka nuna a teburin da ya gabata.

Bambanci tsakanin kewayon Amfani

Yawan tasiri	Yawan tasiri	Yawan tasiri	Tasiri
Zazzabi	+14 zuwa +140°F (-10 zuwa + 60°C)	q	0.23°F/18°F (± 0.13°C/10°C)

Ƙwaƙwalwar ajiya
Na'urar tana da 8MB na ƙwaƙwalwar walƙiya, wanda ya isa don yin rikodi da adana ma'auni miliyan. Ana yin rikodin kowane ma'auni tare da kwanan wata, lokaci, da naúrar. Don Model na tashoshi biyu na 1822, ana yin rikodin ma'auni biyu.

USB

• Protocol: USB Mass Adana
• Matsakaicin saurin watsawa: 12 Mbit/s Nau'in B micro-USB connector

Bluetooth

• Bluetooth 4.0 BLE
• Range 32' (10m) na al'ada kuma har zuwa 100' (30m) a layin gani
• Ƙarfin fitarwa: +0 zuwa -23dBm
• Mahimmancin ƙima: -93dBm
• Matsakaicin adadin canja wuri: 10 kbits/s
• Matsakaicin amfani: 3.3μA zuwa 3.3V

Tushen wutan lantarki

• Ana yin amfani da kayan aikin ta batirin alkaline 1.5V LR6 ko AA uku. Kuna iya maye gurbin batura tare da batura NiMH masu caji na girman iri ɗaya. Duk da haka, ko da lokacin da batura masu caji suka cika, ba za su kai ga voltage na batirin alkaline, kuma alamar baturi zai bayyana azaman or .
• Voltage don daidaitaccen aiki shine 3 zuwa 4.5V don batir alkaline da 3.6V don batura masu caji. A ƙasan 3V, kayan aikin yana daina ɗaukar ma'auni kuma yana nuna saƙon BAt.
• Rayuwar baturi (tare da kashe haɗin Bluetooth) shine:
• Yanayin jiran aiki: 500 hours
• Yanayin rikodi: shekaru 3 akan ƙimar ma'auni ɗaya kowane minti 15
• Hakanan ana iya kunna na'urar ta hanyar kebul na USB micro, wanda aka haɗa da komfuta ko adaftar hanyar bango.

Yanayin Muhalli
Don amfani a ciki da waje.

• Kewayon Aiki: +14 zuwa +140°F (-10 zuwa 60°C) da 10 zuwa 90% RH ba tare da tari ba.
• Kewayon ajiya: -4 zuwa +158°F (-20 zuwa +70°C) da 10 zuwa 95% RH ba tare da tari ba, ba tare da batura ba.
• Tsayi: <6562' (2000m), da 32,808' (10,000m) a cikin ajiya
• Matsayin gurɓatawa: 2

Ƙayyadaddun Makanikai

• Girma (L x W x H): 5.91 x 2.83 x 1.26" (150 x 72 x 32mm)
• Mass: 9.17oz (260g) kimanin.
• Kariyar shiga: IP 50, tare da haɗin kebul na rufe, ta IEC 60 529
• Gwajin tasirin juzu'i: 3.28' (1m) akan IEC 61010-1

Yarda da Ka'idodin Duniya
Kayan aikin ya dace da daidaitaccen IEC 61010-1.

Daidaitawar Electromagnetic (CEM)

• Kayan aikin ya dace da daidaitaccen IEC 61326-1.
• Kayayyakin ba su tasiri ta hanyar hasken lantarki na lantarki. Koyaya, na'urori masu auna firikwensin na Model 1821 da 1822 na iya shafar su, saboda siffar wayar su. Wannan na iya sa su yi aiki azaman eriya masu iya karɓar radiyo na lantarki da tasiri a ma'auni.

KIYAWA

Sai dai batura, kayan aikin ba su ƙunshi sassan da za a iya maye gurbinsu da ma'aikatan da ba a ba su horo na musamman ba kuma ba su da izini ba. Duk wani gyara mara izini ko maye gurbin sashe da "daidai" na iya cutar da aminci sosai.

Tsaftacewa

• Cire haɗin kayan aiki daga duk na'urori masu auna firikwensin, kebul, da sauransu kuma kashe shi.
• Yi amfani da yadi mai laushi, dampcike da ruwan sabulu. Kurkura da tallaamp yadi da bushewa da sauri tare da busasshiyar kyalle ko iska ta tilastawa. Kada a yi amfani da barasa, abubuwan kaushi, ko hydrocarbons.

Kulawa

• Sanya hular kariya akan firikwensin lokacin da ba a amfani da kayan aiki.
• Ajiye kayan aiki a wuri mai bushe kuma a yawan zafin jiki.

Madadin Baturi

• The alamar tana nuna ragowar rayuwar baturi. Lokacin da alamar babu komai, duk batura dole ne a maye gurbinsu (duba §1.1).
• Ba dole ba ne a kula da batirin da aka kashe a matsayin sharar gida na yau da kullun. Kai su zuwa wurin da ya dace na sake yin amfani da su.

Sabunta Firmware
AEMC na iya sabunta firmware na kayan aiki lokaci-lokaci. Ana samun sabuntawa don saukewa kyauta. Don bincika sabuntawa:

1. Haɗa kayan aikin zuwa Cibiyar Kula da Logger Data.
2. Danna Taimako.
3. Danna Sabuntawa. Idan na'urar tana gudanar da sabuwar firmware, saƙo yana bayyana yana sanar da ku wannan. Idan akwai sabuntawa, shafin AEMC Zazzagewa yana buɗewa ta atomatik. Bi umarnin da aka jera akan wannan shafin don zazzage sabuntawar.

Bayan sabunta firmware, yana iya zama dole don sake saita kayan aikin (duba §2).

GYARA DA KYAUTA

Don tabbatar da cewa kayan aikinku sun cika ƙayyadaddun bayanai na masana'anta, muna ba da shawarar cewa a tsara za a mayar da shi zuwa Cibiyar Sabis ɗin masana'anta a cikin tazarar shekara ɗaya don sake daidaitawa, ko kamar yadda wasu ƙa'idodi ko hanyoyin ciki suka buƙata.
Don gyaran kayan aiki da daidaitawa
Dole ne ku tuntuɓi Cibiyar Sabis ɗinmu don Lambar Izinin Sabis na Abokin Ciniki (CSA#). Wannan zai tabbatar da cewa lokacin da kayan aikin ku ya zo, za a bi diddigin su kuma a sarrafa su da sauri. Da fatan za a rubuta CSA# a wajen kwandon jigilar kaya. Idan an dawo da kayan aikin don daidaitawa, muna buƙatar sanin idan kuna son daidaitaccen gyare-gyare ko abin da za a iya ganowa zuwa NIST (ya haɗa da takardar shaidar daidaitawa da bayanan daidaitawa da aka yi rikodi).

Don Arewa / Tsakiya / Kudancin Amurka, Ostiraliya da New Zealand

• Jirgin ruwa Zuwa: Chauvin Arnoux®, Inc. dba AEMC® Instruments
• 15 Faraday Drive • Dover, NH 03820 USA
• Waya: 800-945-2362 (Fitowa ta 360)
• (603)749-6434 (Fit. 360)
• Fax: (603)742-2346 • 603-749-6309
• Imel: gyara@aemc.com.

(Ko tuntuɓi mai rarrabawa ku mai izini.) Ana samun farashin gyara, daidaitaccen daidaitawa, da daidaitawa ga NIST.
NOTE: Dole ne ku sami CSA# kafin dawo da kowane kayan aiki.

TAIMAKON FASAHA DA SALLAH

• Idan kuna fuskantar kowace matsala ta fasaha, ko buƙatar kowane taimako tare da ingantaccen aiki ko aikace-aikacen kayan aikin ku, da fatan za a kira, fax, ko imel ɗin ƙungiyar tallafin fasahar mu:
• Tuntuɓi: Chauvin Arnoux®, Inc. dba AEMC® Instruments Wayar: 800-945-2362 (Fitowa ta 351) • 603-749-6434 (Fitowa ta 351)
• Fax: 603-742-2346
• Imel: techsupport@aemc.com.

GARANTI MAI KYAU

Kayan aikin AEMC ɗin ku yana da garanti ga mai shi na tsawon shekaru biyu daga ranar siyan asali na asali akan lahani a cikin kera. An bayar da wannan garanti mai iyaka ta AEMC® Instruments, ba ta mai rarrabawa daga wanda aka saya ba. Wannan garantin ya ɓace idan naúrar ta kasance tampda aka yi tare da, zagi, ko kuma idan lahanin yana da alaƙa da sabis ɗin da AEMC® Instruments bai yi ba. Ana samun cikakken kewayon garanti da rajistar samfur akan mu websaiti a:  www.aemc.com/warranty.html. Da fatan za a buga bayanan Garanti na kan layi don bayananku.

Abin da AEMC® Instruments zai yi
Idan rashin aiki ya faru a cikin lokacin garanti, zaku iya dawo mana da kayan aikin don gyarawa, muddin muna da bayanan rajistar garantin ku file ko hujjar sayayya. AEMC® Instruments zai, a zaɓinsa, gyara ko maye gurbin abin da bai dace ba.
Garanti Gyaran
Abin da dole ne ku yi don dawo da Kayan aiki don Gyara Garanti: Da farko, nemi Lambar Izinin Sabis na Abokin Ciniki (CSA#) ta waya ko ta fax daga Sashen Sabis ɗinmu (duba adireshin da ke ƙasa), sannan mayar da kayan aiki tare da Fom ɗin CSA da aka sa hannu. Da fatan za a rubuta CSA# a wajen kwandon jigilar kaya. Koma kayan aiki, postage ko jigilar kaya an riga an biya zuwa:

• Jirgin ruwa Zuwa: Chauvin Arnoux®, Inc. dba AEMC® Instruments
• 15 Faraday Drive • Dover, NH 03820 USA
• Waya: 800-945-2362 (Fitowa ta 360)
• (603)749-6434 (Fit. 360)
• Fax: (603)742-2346 • 603-749-6309
• Imel: gyara@aemc.com.

Tsanaki: Don kare kanku daga hasarar hanyar wucewa, muna ba da shawarar ku tabbatar da kayan da aka dawo dasu.
NOTE: Dole ne ku sami CSA# kafin dawo da kowane kayan aiki.

Chauvin Arnoux®, Inc. dba AEMC® Instruments

• 15 Faraday Drive • Dover, NH 03820 USA • Waya: 603-749-6434 • Fax: 603-742-2346
• www.aemc.com.

Takardu / Albarkatu

AEMC INSTRUMENTS 1821 Thermometer Data Logger [pdf] Manual mai amfani 1821, 1822, 1823, 1821 Thermometer Data Logger, Thermometer Data Logger, Data Logger, Logger

Magana

• Manual mai amfani