Littafin aiki
Ultrasonic kusanci canza tare da sauyawa fitarwa guda ɗaya da IO-Link
kube-35/F
kube-130/F
kube-340/F
Bayanin Samfura
Firikwensin cube yana ba da ma'aunin mara lamba na nisa zuwa abu wanda dole ne a sanya shi a cikin yankin gano firikwensin.
An saita fitarwar sauyawa bisa sharadi akan daidaitawar nisan sauyawa.
Bayanan Tsaro
- Karanta littafin aiki kafin farawa.
- Ƙwararrun ma'aikata ne kawai za a iya aiwatar da haɗin kai, shigarwa da gyare-gyare.
- Babu wani bangaren aminci daidai da umarnin Injin EU, amfani da shi a cikin yanki na kariyar na'ura da ba a yarda da shi ba.
Amfani Da Kyau
Ana amfani da na'urori masu auna firikwensin cube ultrasonic don gano abubuwan da ba a haɗa su ba.
IO Link
Firikwensin cube yana da IO-Link-mai ikon daidai da ƙayyadaddun IO-Link V1.1 kuma yana goyan bayan Smart Sensor Pro.file kamar Aunawa da Sauyawa Sensor. Ana iya sa ido da daidaita firikwensin ta hanyar IO-Link.
Shigarwa
Hana firikwensin a wurin dacewa, duba "Hanyar hawan QuickLock".
Haɗa kebul na haɗi zuwa filogin na'urar M12, duba Hoto 2.
Idan ya cancanta, yi amfani da taimakon jeri (duba »Amfani da Taimakon Daidaitawa«).
Farawa
Haɗa wutar lantarki.
Saita sigogi na firikwensin, duba zane 1.
Gudanar da firikwensin cube
Ana iya sarrafa firikwensin ta amfani da maɓallin turawa T1 da T2. LEDs guda hudu suna nuna aiki da yanayin fitarwa, duba hoto na 1 da siffa 3.
 |
alamar microsonic | Bayanin IO-Link | IO-Link Smart Sensor Profile | launi |
| 1 | + UB | L+ | launin ruwan kasa | |
| 2 | – | – | – | fari |
| 3 | - UB | L- | blue | |
| 4 | F | Q | SSC | baki |
| 5 | Com | NC | launin toka |
Hoto 2: Pin aiki tare da view a kan filogin firikwensin, bayanin IO-Link da lambar launi na igiyoyin haɗin microsonic
| LED | Launi | Mai nuna alama | LED… | Ma'ana |
| LED1 | rawaya | yanayin fitarwa | on kashe |
an saita fitarwa fitarwa ba a saita |
| LED2 | kore | ikon nuna alama | on walƙiya |
yanayin aiki na yau da kullun Yanayin IO-Link |
| LED3 | kore | ikon nuna alama | on walƙiya |
yanayin aiki na yau da kullun Yanayin IO-Link |
| LED4 | rawaya | yanayin fitarwa | on kashe |
an saita fitarwa fitarwa ba a saita |
Hoto 3: Bayanin alamun LED
Hoto na 1: Saita firikwensin ta hanyar hanyar koyarwa
Hanyoyin Aiki
- Aiki tare da wurin sauyawa ɗaya
Ana saita fitarwar sauyawa lokacin da abu ya faɗi ƙasa da wurin da aka saita. - Yanayin taga
Ana saita fitarwar sauyawa lokacin da abu yana cikin iyakokin taga. - Shamaki mai nuni da hanya biyu
Ana saita fitarwar sauyawa lokacin da abu yake tsakanin firikwensin da kafaffen abin tunani.
Aiki tare
Idan nisan haɗin na'urori masu auna firikwensin ya faɗi ƙasa da ƙimar da aka nuna a hoto na 4, za su iya yin tasiri ga juna.
Don guje wa wannan, ya kamata a yi amfani da aiki tare na ciki («sync« dole ne a kunna, duba zane 1). Haɗin haɗin kowane fil 5 na firikwensin da za a daidaita su.
 |
 |
|
| kube-35… kube-130… kube-340… |
≥0.40m ≥1.10m ≥2.00m |
≥2.50m ≥8.00m ≥18.00m |
Hoto 4: Ƙananan nisa na taro ba tare da aiki tare ba
Bakin hawa na QuickLock
Ana haɗe firikwensin cube ta amfani da madaidaicin hawa na QuickLock:
Saka firikwensin a cikin madaidaicin bisa ga siffa 5 kuma latsa har sai an ji sautin sashin.
Ana iya jujjuya firikwensin a kusa da kusurwoyinsa lokacin da aka saka shi cikin madaidaicin. Bugu da ƙari, ana iya jujjuya kan firikwensin ta yadda za a iya ɗaukar ma'auni ta hanyoyi huɗu daban-daban, duba "Rotatable Sensor head".
Ana iya kulle maƙallan:
Zamar da latch (Fig. 6) a cikin hanyar firikwensin.
Cire firikwensin daga madaidaicin hawa na QuickLock:
Buɗe latch bisa ga hoto na 6 kuma danna ƙasa (Fig. 7). Firikwensin yana cirewa kuma ana iya cire shi.
Shugaban firikwensin juyawa
Na'urar firikwensin cube yana da shugaban firikwensin juyawa, wanda za'a iya jujjuya yanayin firikwensin ta 180 ° (Fig. 8).
Saitin masana'anta
Ana isar da firikwensin cube masana'anta tare da saitunan masu zuwa:
- Sauyawa fitarwa akan wurin sauya yanayin aiki
- Canja wurin fitarwa akan NOC
- Canza nisa a kewayon aiki
- An saita Input Com zuwa "sync"
- Tace a F01
- Ƙarfin tacewa a P00
Amfani da Taimakon Alignment
Tare da taimakon jeri na ciki na'urar firikwensin za a iya daidaita shi da kyau ga abu yayin shigarwa. Don yin wannan, ci gaba kamar haka (duba hoto 9):
Hana firikwensin sako-sako a wurin da ake hawa domin har yanzu ana iya motsa shi.
Danna T2 anjima. LEDs masu launin rawaya. Da sauri da rawaya LEDsflash, da karfi da aka samu siginar.
Nuna firikwensin a kusurwoyi daban-daban zuwa abu na kusan daƙiƙa 10 domin firikwensin ya iya tantance matsakaicin matakin sigina. Bayan haka daidaita firikwensin har sai hasken ledojin rawaya koyaushe.
Kunna firikwensin a wannan matsayi.
Latsa T2 ba da jimawa ba (ko jira kimanin 120 s) don fita Taimakon Alignment. Koren LEDs suna walƙiya 2x kuma firikwensin yana komawa yanayin aiki na yau da kullun.
Kulawa
Na'urori masu auna firikwensin microsonic ba su da kulawa. Idan akwai wuce gona da iri da datti muna bada shawarar tsaftace farin firikwensin firikwensin.
Bayanan kula
- Na'urar firikwensin cube yana da yankin makaho, wanda a cikinsa ba zai yuwu a auna nisa ba.
- Na'urar firikwensin cube an sanye shi da diyya na zafin jiki na ciki. Saboda dumama na'urori masu auna kai, ramuwar zafin jiki ya kai wurin aiki mafi kyau bayan kusan. Minti 3 na aiki.
- Na'urar firikwensin cube yana da abin da ake juyawa na turawa.
- Zaɓi tsakanin aikin fitarwa NOC da NCC yana yiwuwa.
- A cikin yanayin aiki na yau da kullun hasken fitilar LEDs masu haske cewa an saita fitarwar sauyawa.
- Ledojin kore masu walƙiya suna nuna cewa firikwensin yana cikin yanayin IO-Link.
- Idan ba a kammala tsarin koyarwa ba, duk canje-canje ana share su bayan kusan. 30 seconds.
- Idan duk LEDs suna walƙiya da sauri a madadin. 3 seconds yayin aikin koyarwa, tsarin koyarwar bai yi nasara ba kuma an watsar da shi.
- A cikin yanayin "hanyoyi biyu masu nuni da" aiki, abu dole ne ya kasance tsakanin kewayon 0 zuwa 92 % na nisa da aka saita.
- A cikin "Saita wurin sauyawa - hanyar A« Koyarwar hanyar koyarwa ainihin nisa zuwa abu ana koyar da firikwensin azaman wurin sauyawa. Idan abu ya matsa zuwa firikwensin (misali tare da sarrafa matakin) to nisan da aka koya shine matakin da firikwensin ya canza kayan aiki.
- Idan abin da za a bincika ya motsa zuwa wurin ganowa daga gefe, "Saita wurin sauyawa +8 % - hanyar B« ya kamata a yi amfani da tsarin koyarwa. Ta wannan hanyar ana saita nisan sauyawa 8 % fiye da ainihin nisa da aka auna zuwa abu. Wannan yana tabbatar da ingantaccen yanayin canzawa koda kuwa tsayin abubuwan ya ɗan bambanta, duba hoto na 10.
- Ana iya sake saita firikwensin zuwa saitin masana'anta (duba "Ƙarin saitunan", zane 1).
- Ana iya kulle firikwensin cube akan canje-canjen da ba'a so a cikin firikwensin ta hanyar aiki "Kunna ko kashe Koyarwa-in + daidaitawa", duba Hoton 1.
- Yin amfani da adaftar LinkControl (na'urorin haɗi na zaɓi) da software na LinkControl don Windows®, duk Koyarwa da ƙarin saitunan sigar firikwensin za a iya daidaita su ta zaɓin zaɓi.
- Sabuwar IODD file da bayanai game da farawa da daidaita na'urori masu auna firikwensin cube ta hanyar IO-Link, zaku sami kan layi a: www.microsonic.de/en/cube.
Iyakar bayarwa
- 1 x QuickLock mai hawa
Bayanan fasaha
 |
 |
 |
 |
| yankin makafi | 0 zuwa 65 mm | 0 zuwa 200 mm | 0 zuwa 350 mm |
| kewayon aiki | mm350 ku | mm1,300 ku | mm3,400 ku |
| iyakar iyaka | mm600 ku | mm2,000 ku | mm5,000 ku |
| kwana na katako yada | duba yankin ganowa | duba yankin ganowa | duba yankin ganowa |
| mitar transducer | 400 kHz | 200 kHz | 120 kHz |
| ƙudurin aunawa | mm0.056 ku | mm0.224 ku | mm0.224 ku |
| ƙudurin dijital | mm0.1 ku | mm1.0 ku | mm1.0 ku |
| yankunan ganowa don abubuwa daban-daban: Wuraren launin toka mai duhu suna wakiltar yankin inda yana da sauƙin gane mai nuna al'ada (masanin zagaye). Wannan yana nuna alamar na al'ada aiki kewayon na'urori masu auna sigina. Wuraren launin toka mai haske suna wakiltar yankin inda har yanzu za'a iya gane babban mai nuni - alal misali faranti. The abin da ake bukata anan shine don mafi kyawu daidaitawa zuwa firikwensin. Ba zai yiwu a kimanta tunanin ultrasonic a wajen wannan yanki ba. |
 |
 |
 |
| sake haifuwa | ± 0.15% | ± 0.15% | ± 0.15% |
| daidaito | ± 1 % (An biya diyya na yanayin zafi na ciki, ana iya kashe shi 1) , 0.17%/K ba tare da diyya ba) |
± 1 % (Zazzagewar zafin jiki na ciki, maiyuwa a kashe 1) , 0.17%/K ba tare da diyya ba) |
± 1 % (Zazzagewar zafin jiki na ciki, maiyuwa a kashe 1) , 0.17%/K ba tare da diyya ba) |
| aiki voltagda UB | 9 zuwa 30V DC, juyewar kariyar polarity (Class 2) | 9 zuwa 30V DC, juyewar kariyar polarity (Class 2) | 9 zuwa 30V DC, juyewar kariyar polarity (Class 2) |
| voltagda rigima | ± 10% | ± 10% | ± 10% |
| babu-load wadata halin yanzu | ≤50 mA | ≤50 mA | ≤50 mA |
| gidaje | PA, Ultrasonic transducer: polyurethane kumfa, epoxy guduro tare da gilashin abun ciki |
PA, Ultrasonic transducer: polyurethane kumfa, epoxy guduro tare da gilashin abun ciki |
PA, Ultrasonic transducer: polyurethane kumfa, epoxy guduro tare da gilashin abun ciki |
| Tsarin kariya ga EN 60529 | IP67 | IP67 | IP67 |
| daidaituwar al'ada | TS EN 60947-5-2 | TS EN 60947-5-2 | TS EN 60947-5-2 |
| nau'in haɗin gwiwa | 5-pin initiator toshe, PBT | 5-pin initiator toshe, PBT | 5-pin initiator toshe, PBT |
| sarrafawa | 2 maɓallan turawa | 2 maɓallan turawa | 2 maɓallan turawa |
| alamomi | 2x LED kore, 2x LED rawaya | 2x LED kore, 2x LED rawaya | 2x LED kore, 2x LED rawaya |
| shirye-shirye | Koyarwa ta hanyar maɓallin turawa, LinkControl, IO-Link | Koyarwa ta hanyar maɓallin turawa, LinkControl, IO-Link | Koyarwa ta hanyar maɓallin turawa, LinkControl, IO-Link |
| IO Link | V1.1 | V1.1 | V1.1 |
| zafin aiki | –25 zuwa + 70 ° C | –25 zuwa + 70 ° C | –25 zuwa + 70 ° C |
| zafin jiki na ajiya | –40 zuwa + 85 ° C | –40 zuwa + 85 ° C | –40 zuwa + 85 ° C |
| nauyi | 120g ku | 120g ku | 130g ku |
| canza yanayin hysteresis 1) | mm5 ku | mm20 ku | mm50 ku |
| sauyawa mita 2) | 12 Hz | 8 Hz | 4 Hz |
| lokacin amsawa 2) | 64 ms | 96 ms | 166 ms |
| jinkirta lokaci kafin samuwa | <300 ms | <300 ms | <300 ms |
| oda A'a. | kube-35/F | kube-130/F | kube-340/F |
| sauyawa fitarwa | tura tura, UB-3 V, -UB+3 V, Imax = 100mA mai sauyawa NOC/NCC, tabbataccen kewayawa | tura tura, UB-3 V, -UB+3 V, Imax = 100mA mai sauyawa NOC/NCC, tabbataccen kewayawa | tura tura, UB-3 V, -UB+3 V, Imax = 100 mA NOC/NCC mai sauya sheka, tabbacin gajeriyar kewayawa |
microsonic GmbH / Phoenixseestraße 7 / 44263 Dortmund / Jamus /
T +49 231 975151-0 / F +49 231 975151-51 /
E info@microsonic.de / W microsonic.de
Abubuwan da ke cikin wannan takarda yana ƙarƙashin canje-canjen fasaha. Ana gabatar da ƙayyadaddun ƙayyadaddun bayanai a cikin wannan takaddar ta hanyar siffantawa kawai.
Ba su da garantin kowane fasalin samfur.
Takardu / Albarkatu
 |
microsonic IO-Link Ultrasonic Proximity Switch Tare da Fitowar Canjawa ɗaya [pdf] Jagoran Jagora IO-Haɗin Ultrasonic Excimity Canja tare da Fitar Sauyawa, IO-Haɗin Ultrasonic Canjin da fitarwa ɗaya, sauyawa tare da fitarwa ɗaya, sauya fitarwa |
