BOX TX Multi-Elevator's Voice na Intercom Scalable System
Ozi ngwaahịa
ANEP BOX TX bụ olu elevator ọtụtụ yana intercom nwere ike ịgbatị
usoro. Emebere ya maka ibuli a zụrụ azụ na nke nwere ahụmahụ
ndị ọkachamara. Usoro a na-akwado EN81-28 na EN 81-70
ụkpụrụ maka nleba anya n'ime anya, nchekwa na nnweta na
igwe mbuli elu.
ANEP BOX TX nwere atụmatụ ọrụ aka ndị a:
- Ntọala ụlọ ọrụ: akpaaka
- Ogologo oge nleba anya: ụbọchị 3
Ntuziaka ojiji ngwaahịa
1. Nwụnye / Nrụpụta
- Tupu ịwụnye ihe ANEP, hụ na ebuli ya nke ọma
a na-agbaso iwu nchekwa. - Jiri akụrụngwa nchedo onwe gị n'oge ntinye.
- Lelee nrụnye tupu ịme ọkụ eletrik ọ bụla
njikọ. - Gaa ebe nchekwa tupu itinye aka na mbuli elu
aro.
2. Ijikwa ngwa ANEP
- Gbaa mbọ hụ na akụrụngwa ANEPBOX niile (TA, TX, TX+, wdg) bụ
agbanyụrụ tupu ejiri ya. - Jikọọ ngwaọrụ niile na ngwa ANEPBOX tupu jikọọ
na akara ekwentị.
3. BOX TX Njikọ
Achọrọ njikọ ndị a maka ANEP BOX TX:
- Ihe mmetụta magnetik dị elu (MSH)
- Ihe mmetụta ndọta dị ala (MSL)
- CD (Oghere ụzọ)
- OD (Ọnụ ụzọ mechiri emechi)
- PB Cabin Mkpu (NO ma ọ bụ NC)
- RJ11
- Maka LEDs Y/G
- Ekwentị n'okpuru Cabin (BOX-SC)
- Ahịrị ekwentị
- ALIM-CONTROL II (ref ANEP A-BA-039)
- Nwalee
- Ụlọ ekwentị (MIDIS BP)
4. Ijikọ ihe mmetụta
Igbe ANEP nwere ntinye anọ (E1 ruo E4) maka ijikọ
sensọ:
- E1 - ọnụ ụzọ ụlọ imeghe
- E2 - emechiela ọnụ ụzọ ụlọ
- E3 - ihe mmetụta magnetik HIGH
- E4 - ihe mmetụta magnetik LOW
5. Ijikọ ọnọdụ / ndozi ihe mmetụta [E3] na
[E4]
Igbe ANEP chọrọ idobe ndọta maka izi ezi
nchọpụta:
- Ịgụ Igwe Ọdụdọ: Elu = 50mm
- Ịtọgharịa Igwe Ọdụdọ: Elu = 200mm
5.1 Elevator nwere ala dị mkpụmkpụ
N'ihe gbasara ala dị mkpụmkpụ, uru kacha nta maka stage
nchọpụta bụ 700mm n'etiti ọkwa abụọ.
Biko rụtụ aka na ntuziaka onye ọrụ maka ntuziaka zuru ezu karị
yana ozi gbasara ịrụ ọrụ ANEP BOX TX.
Igbe ANEP TX
ỤDỤ MULTI-ELIVATOR NA SITECOM SCALABLE SYSTEM
NT_ANEP_BOX_TX_EN_31-03-2023
1 – NDỤMỌDỤ
Ezubere akwụkwọ a maka ndị ọkachamara n'ebuli a zụrụ azụ na ahụmahụ. 1.1 - Nwụnye / Nrụpụta Ya mere, n'oge ntinye aka na igwe mbuli iji wụnye ihe ANEP, a ga-agbaso iwu nchekwa nchekwa kwesịrị ekwesị.
Ojiji nke " Akụrụngwa nchedo onwe onye ". Nbunye nke nrụnye tupu ịme njikọ eletrik ọ bụla. Gaa n'ebe dị mma tupu itinye aka n'olu ọ bụla.
Tupu ijikwa ngwa ANEP ọ bụla, gbaa mbọ hụ na agbanyụrụ nke ikpeazụ.
Na ngwa “ANEPBOX” ọ bụla (TA,TX,TX+,…), ngwaọrụ niile ga-ejikọrịrị tupu njikọ ọ bụla na ahịrị ekwentị.
Ọ dị mkpa maka njikọ njikọ l'ensemble des périphériques AVANT de brancher la ligne téléphonique:
– Bouton d'alarme cabine (NO ou NC en contact sec) – Plastron cabine (MIDIS) ma ọ bụ phonie HP et micro (BA-mini-GHP) – Phonie sous cabine (BOX-SC) – Alimentation 230/12V secourue na contrôlée de pịnye ANEP ALIM-CONTROL II
(si boucle magnétique auditive et/ou voyants Jaune / Vert)
1.2 - Igwe na-eme njem Anyị na-adụ ọdụ ka ị kwado igwe mbuli na eriri njem enyo enyo iji hụ na ụda olu dị mma iji zere ọgba aghara ọ bụla nke nwere ike ibute mmebi ọ bụla. Ọrụ nke akụrụngwa ekwentị na-adabere n'ụzọ dị ukwuu na njirimara nke akara ekwentị. A ghaghị ilebara anya pụrụ iche iji hụ na akara ekwentị ahụ ka ọ ghara imebi njirimara teknụzụ ahaziri. Vérifier les câblages surtout si ceux-ci relient plusieurs machineries ascenseurs. · Ụdị USB, Cable routing (obere / ike ugbu a), Parasites (VMC, generators), wdg ...
2
NT_ANEP_BOX_TX_EN_31-03-2023
2 - Izugbe
2.1 - Nkà na ụzụ atụmatụ
Ndabere na ụkpụrụ European EN81-28 na EN81-70 * agbakwunyere olu ma ọ bụ nke dịpụrụ adịpụ · Usoro ụda olu atọ site na mgbakwunye nke modul BOX-SC MIC ma ọ bụ BOX-SC,
Igbe-F · Ịkwado n'elu ụlọ ebuli ụgbọ ala · Akwadoro site na eriri ekwentị analogical ma ọ bụ kwadoro ma ọ bụrụ na magnetik loop ma ọ bụ
A na-ejikọta ọkụ na-acha akwụkwọ ndụ akwụkwọ ndụ na-acha akwụkwọ ndụ akwụkwọ ndụ · Ụdị ọkpụkpọ ugboro ugboro · Nkwụghachi akpaaka · Mpịakọta olu na nhazi ụda (mmemme mpaghara ma ọ bụ nke dịpụrụ adịpụ) · Nkwenye ọnọdụ oku · A na-ezigara njirimara ọnọdụ oku na ANEPCenter® ma ọ bụ na anepanywhere.com · Igwe eji eme ihe na bọtịnụ 12 · 1 ntinye site na bọtịnụ mkpuchi ụgbọ ala na-ebuli elu (NO1 ma ọ bụ NC) nnabata,
mbata/ ọpụpụ nke onye ọrụ nyocha wee nwalee oku na nkesa ụda olu ANEP · 1 onye na-ahụ maka oti mkpu na-ebuli elu ụgbọ elu · 6 ncheta nọmba ekwentị · Mgbasa ozi nke nọmba nke abụọ na-akpaghị aka ma ọ bụrụ na ọ na-arụ ọrụ ma ọ bụ na-azaghị nọmba ekwentị · Ncheta na EEprom na-enweghị batrị ma ọ bụ mmezi ọ bụla · Nnwale cyclical (1, 2 ma ọ bụ 3 ụbọchị) · Mgbasa ozi sekit na-arụ ọrụ n'ala. nke
Ozi olu · Ntinye 1 “Ebuli ọkụ ụgbọ ala” · Na-ebuli njikwa ọrụ
Ntọala ụlọ ọrụ
Koodu mmemme:
1 2 3
· Ogologo oge nkwukọrịta: nkeji 3
· Dokwasa :
Akpaaka
Nnwale cyclical:
3 ụbọchị
* ọkọlọtọ EN81-28: nlekota anya maka igwe mbuli elu ọhụrụ kemgbe Ọktọba 2003
TS EN 81-70 Iwu nchekwa maka nrụpụta na ntinye nke igwe mbuli elu - Nkebi 70: nnweta nke mbuli elu maka mmadụ niile gụnyere ndị nwere nkwarụ
3
NT_ANEP_BOX_TX_EN_31-03-2023
3 - Njikọ Igbe TX
Ihe mmetụta magnetik Elu
MSH
MSL
Sensọ magnetik dị ala
CD
MSH MSL
CD OD
OD
Igbe-INTENS
PB CABIN Mkpu (Ọ dịghị NC)
Ma ọ bụ igbe-DISCRI ma ọ bụ igbe-SECU
RJ11
*,1,2,3
Maka Y/G LEDS
Ekwentị n'okpuru CABIN
(BOX-SC)
Akara ekwentị
ALIM-CONTROL II
(Ref ANEP A-BA-039)
Nnwale
PHony CABIN (MIDIS BP)
… ma ọ bụ MIDIS-FACEPLATE LIGAN / LIGAN-BP MICRO-DEP. BA-MAX BA-Obere-GHP
Ụlọ
230Vac akwụkwọ ndụ akwụkwọ ndụ
agba aja aja
NT_ANEP_BOX_TX_EN_31-03-2023
Ngalaba
230Vac
(Akụkụ ejiri olu ANEP wetara)
4
3.1 - Ijikọ ihe mmetụta sensọ
Njikọ nke sensọ ozi na mmeghe / mmechi nke ọnụ ụzọ ụgbọ ala na mmegharị nke ebuli ga-ejikọta ya na ntinye E1 na E4 nke ANEP BOX.
Ntinye ndị a na-enweta kọntaktị akọrọ na-enweghị ike ọ bụla.
E1 - Ọnụ ụzọ ime ụlọ emeghere E2 - Ọnụ ụzọ ime ụlọ emechiela E3 - Ihe mmetụta magnetik HIGH E4 - Ihe mmetụta magnetik LOW
Mara: Iberibe ozi anọ a bụ iwu maka ịrụ ọrụ nke nkwupụta.
Ihe mmetụta magnetik Elu
MSH
Sensọ magnetik dị ala
MSL
MSL MSH
CD OD
OD
Oghere ụzọ
CD
Ọnụ ụzọ emechi
5
NT_ANEP_BOX_TX_EN_31-03-2023
3.2 - Ijikọ ihe mmetụta ọnọdụ/mmezigharị ihe mmetụta [E3] na [E4]
Ọkwa iri na anọ
Nhazi 10mm Max
Ọkwa 4th
Ịgụ magnetik Height = 50 mm
Ọkwa 3rd
Ntọghari ndọta * Elu = 200 mm
15° Max
Ọkwa 2nd Ọkwa 1st
(*) IHE: A ga-etinye ndọta ntọgharị n'ọkwa ebe ụgbọ mmiri na-agafekarị (Ex.ample: Ala ala maka R+4)
Ọ bụrụ na enwere mgbasa ozi na-arụ ọrụ, anyị kwesịrị ịbawanye anya
n'etiti magnetik, ma ọ bụ mee ka anya Y
ihe mmetụta magnetik.
ỊGỤTA MAGNETS
Ịtọgharịa magnetik
Igwe Ọdụdọ elu
50mm
MSH
MAGNETIC
SENSOR
ELU
MSL
MAGNETIC
Y
SENSOR
ala
200mm
50mm
MAGNET dị ala
6
NT_ANEP_BOX_TX_EN_31-03-2023
3.2.1 - Elevator nwere ala dị mkpụmkpụ Opekempe uru maka obere stagnchọpụta e bụ 700mm n'etiti ọkwa abụọ (stage ozi).
ELEVATOR SHEATH LIFT (dịkaample)
ỊGỤTA MAGNETS
Ala nke abụọ
Ala nke mbụ
Ala ala Elu
Ala ala dị ala
N'okpuru ala
CABIN
Ịtọgharịa magnetik
Mbelata ihe mmetụta sensọ na-enye ohere ịgụta ndọta
Ihe ndọta na-agụta agaghị enwe ike ịrụ ọrụ sensọ 2 n'otu oge (Nchọpụta ihe ndozi)
7
NT_ANEP_BOX_TX_EN_31-03-2023
3.3 - Njikọ ihe mmetụta PO * na PF ** [E3] na [E4]
*OD = Mepee ụzọ
** CD = Ọnụ ụzọ mechiri emechi
3.3.1 - Elevator na ịnweta otu.
A ga-ejikọta ozi ọnụ ụzọ OD/CD na ntinye E1 (OD) na E2 (CD)
CD OD
Ọnụ ụzọ OD
CD ọnụ ụzọ
3.3.2 - Ebuli ohere ugboro abụọ.
Ozi ọnụ ụzọ OD/CD ga-abụ okpukpu abụọ. (Odiri OD na Oghere Usoro CD)
Mee
Mee (1)
Ọnụ ụzọ 1 CD (2)
Ọnụ ụzọ 2
CD (1)
CD (2)
Ọnụ ụzọ 1
Ọnụ ụzọ 2
IHE: PF na-enye GONG mmalite mmalite. Ọ BỤRỤ na synthesis ahụ na-amalite mgbe mbuli elu KWỤSỊRỊ TUPU emeghere ụzọ, PF SENSOR na-ezighi ezi.
8
NT_ANEP_BOX_TX_EN_31-03-2023
4 - Njikọ YELLOW & GREEN LED (ọ bụrụ na MIDIS adịghị)
- Jikọọ ihe nrịbama eji na ụgbọ ala dịka ọkọlọtọ NF EN 81.28 nke 2003 ma ọ bụ 2018 na 81.70 (12Vcc / 140 mA max kwa egosi) (lee Peeji 15)
- Jikọọ ọkụ ALIM-CONTROL 2 12Vcc (9 ruo 15Vcc).
Enweghị njikọ dị otú ahụ a ga-eme ma ọ bụrụ na ị na-eji MIDIS phony
Igwe ọkụ cathode nkịtị
ÌHÈ ODO
CATHODES nkịtị
ÌHÈ GREEN
Ngalaba
Igwe ọkụ Annode nkịtị
ÌHÈ ODO
CATHODES nkịtị
ÌHÈ GREEN
Ejighi ya
Ngalaba
9
NT_ANEP_BOX_TX_EN_31-03-2023
4.1 - Ọdụdọ & Green LED Prog. dabere na ụkpụrụ EN81-28 nke 2003 ma ọ bụ 2018
Mgbe itinye koodu ohere mmemme
Dabere n'ụdị ọkọlọtọ ịchọrọ maka njikwa LED, pịa # 417 #, ma ọ bụ # 418 #, ma ọ bụ # 419 # n'aka ya.
# 417 #
# 418 #
Ọkọlọtọ EN81-28
2003
Gbanyụọ Þ Gbanyụọ
Gbanyụọ Þ Gbanyụọ
Ngwa ihi ụra/Ụdị nkịtị
Oti mkpu na agbanyere, oku na-aga n'ihu Na nkwurịta okwu ya na onye na-ahụ maka ebe a na-akpọ ebe a na-ekwurịta okwu, a kwụsịrị n'ahịrị, anabatara mkpu (ime ime ma ọ bụ na saịtị)
Gbanyụọ
Gbanyụọ Ngwaọrụ ihi ụra / ỌDỊDỊ NKE
NA Þ
Gbanyụọ mkpu, kpọọ na-aga n'ihu
Ọkọlọtọ EN81-28
2018
NA Þ NA Þ Gbanyụọ
NA Þ Gbanyụọ
Na nkwurịta okwu ya na onye na-ahụ maka ebe a na-akpọ oku Nzikọrịta ozi emechara, ahịrị kwụnyere oti mkpu (imetere ma ọ bụ na saịtị)
FLASHING ÞºÞº
FLASHING ºÞºÞ
Nrụrụ ule cyclic ahaziri
Gbanyụọ
Gbanyụọ Ngwaọrụ ihi ụra / ỌDỊDỊ NKE
Ọkọlọtọ EN81-28
2018
NA Þ NA Þ
Gbanyụọ Þ
Oti mkpu na agbanyere, oku na-aga n'ihu Na nkwurịta okwu gị na onye na-ahụ maka ebe oku
EGWU ODO
Gbanyụọ ọkụ ọkụ ŞºÞº
Gbanyụọ ọkụ ºÞºÞ
Emechara nzikọrịta ozi, ahịrị kwụnyere oti mkpu (nke dịpụrụ adịpụ ma ọ bụ na saịtị) ntụpọ ule cyclic ahaziri
Mmemme ahụigodo ANEP BOX
* Mgbe ịgbalite ọnọdụ ohere mmemme ”123″
# 417 # Na-akwado njikwa Yellow na Green LED na ụkpụrụ 2003
# 418 # Na-akwado njikwa Yellow na Green LED na ụkpụrụ 2018
Na-akwado njikwa nke LEDs edo edo na akwụkwọ ndụ akwụkwọ ndụ dị ka # 419 # ruo ụkpụrụ 2018 na-acha odo odo LED kwụsịrị mgbe nkwurịta okwu.
(njedebe mkpu)
# 419 #
10
NT_ANEP_BOX_TX_EN_31-03-2023
5 – CABIN Mkpu ịkpa oke
A na-eji ịkpa oke mkpu egbochi mgbasa ozi na-enweghị isi na enweghị isi n'ihi iji ihe ọjọọ eme ihe ma ọ bụ ebumnobi ọjọọ.
Enwere ike ịme ịkpa ókè n'ime ma ọ bụ na mpụga ma ọ bụ na-akwadoghị ya. 5.1 - ịkpa oke na-akwadoghị Ụdị nhazi a na-enye ohere ka eburu n'uche mkpuchi ụlọ ahụ kpamkpam. N'ụdị mmemme, (lee ibe 11)
- Pịa igodo # 307 # nke ọma - ANEP-BOX TX na-ewepụta ụda 3. 5.2 - ịkpa ókè dị n'ime na ọnọdụ a, ANEP BOX TX na-arụ ọrụ nhazi na-eburu n'uche oghere / mmechi nke ụgbọ ala na ọdụ ụgbọ ala yana mmegharị nke elevator. A na-akpa oke oti mkpu: - Mgbe ị na-ebuli elu, - N'ime nkeji iri na ise nke mbụ ka agbanyere igwe mbuli elu n'elu ụlọ, - Mgbe ụlọ na ọnụ ụzọ ọdịda abụọ mepere emepe. Ntinye E1, E2 na-enweta kọntaktị OD, CD nke ọnụ ụzọ ụlọ.
Ọnụ ụzọ DISCRI nwere ike ịnweta onyonyo nke imeghe/imechi ụzọ ọdịda: – A voltage (5Vcc ruo 230Vac) etinyere na ntinye DISCRI na-egosi na
Mkpuchi ọnụ ụzọ ọdịda. N'okwu a: · N'agbanyeghị ọnọdụ nke ọnụ ụzọ ụlọ ahụ, a kwadoro mkpu ahụ. - Enweghị voltage etinyere na ntinye DISCRI na-egosi n'ọnụ ụzọ emeghere ọdịda. N'okwu a:
· A na-emechi ọnụ ụzọ ụlọ: a na-eme ka oti mkpu, · Ọnụ ụzọ ụlọ emeghere: a na-akpa ókè. N'oge onye ọrụ nka nọ, a naghị enweta ịkpa oke. Usoro ọgwụgwọ a chọrọ ọnụnọ nke 12V ọkọnọ voltage. Na ọnọdụ nhazi a na enweghị 12V, ọ dịghị ịkpa ókè.
Na usoro mmemme,
Pịa # 308 # n'usoro ANEP-BOX na-ewepụta ụda 3
5.3 - Mkpu amanye Mgbe akwadoro ịkpa ókè a, enwere ike ịkpalite mkpu ụlọ ma ọ bụrụ na ejiri 4 pịa n'ime oge nkeji iri na ise na bọtịnụ ụlọ. Oge ọ bụla a pịara bọtịnụ ahụ, oge njide ga-adị ogologo karịa oge iwere mmemme yana oge ntọhapụ bọtịnụ dịkarịa ala 3 sekọnd ga-enwerịrị nkwanye ùgwù n'etiti pịa ọ bụla.
11
NT_ANEP_BOX_TX_EN_31-03-2023
6 – NOMBA NKE MBUFE NA-EKWU NDỊ NA-EKWU
Nọmba nnyefe (ma ọ bụ ihe nchọpụta ma ọ bụ PROM): Modul ANEP BOX na-egosipụta onwe ya na ọnọdụ data site na izipu “Numba” Transmitter ID” (nke a na-akpọkwa Identifier ma ọ bụ PROM dabere na ebe oku) Nọmba a dabara na nọmba nrụpụta nke modul ANEP BOX.
Iji mee mgbanwe na ọdụ data dị iche iche nke ebe nnabata, ọ ga-ekwe omume gbanwee nọmba nnyefe a.
Mara: Nọmba nnyefe bụ ọnụọgụ ma nwee ọnụọgụ asatọ.
Ọpụ: 4 3 2 1 1 5 6 9
Kpachara anya: Ịgbanwe ID Transmitter, anaghị achọ ka ịnweta mmemme
* * # 2 2 2 0 xx xx xx xx #
xx xx xx xx = ọnụọgụ ọnụọgụ ọnụọgụ asatọ
6.1 - Nọmba Modul okwu:
Enwere ike itinye ọtụtụ modul nke ANEP BOX n'otu ahịrị ekwentị (kachasị 8), ọ bụ iwu na ịhazi adreesị nke modul ọ bụla.
Mgbe itinye koodu ohere mmemme, pịa igodo:
# 303 wee 1 # ma ọ bụrụ modul 1 (Elevator 1)
or
# 303 wee 2 # ma ọ bụrụ modul 2 (Elevator 2)
or
# 303 wee 8 # ma ọ bụrụ modul 8 (Elevator 8)
Mara: Modul = ANEP BOX-TX (ma ọ bụ TX +) ma ọ bụ ANEP BOX-C (olulu ala)
Igbe-C
12
NT_ANEP_BOX_TX_EN_31-03-2023
Nhazi 1 - Ekwentị nnabata nke akwụghị ụgwọ yana okwu BOX-C ga-eme na 4 BOX TX yana na 4 BOX-C
Akara ekwentị
ELEV. 1
ELEV. 2
ELEV. 3
ELEV. 4
Nhazi 2 - Akụrụngwa ụgbọ ala nwere BOX-SC (kachasị 8) na-agwa okwu a ga-eme na 8 BOX TX
Akara ekwentị
ELEV. 1
ELEV. 2
ELEV. 3
ELEV. 4
ELEV. 5
ELEV. 6
ELEV. 7
ELEV. 8
IHE: A ga-ekewa ọnụọgụ abụọ ndị a mgbe ị na-eji ụzọ GSM => ugboro anọ BOX-TX nwere BOX-SC (n'okpuru cabin) => 2 ugboro BOX-TX nwere BOX-C (olulu ala)
13
NT_ANEP_BOX_TX_EN_31-03-2023
7 - Mmemme (igbe ANEP kwụsịrị)
Ihe dị mkpa:
A ga-ejikọtarịrị ANEP BOX TX niile n'otu ahịrị ekwentị iji kwe ka ịnweta usoro mmemme.
A na-eji keyboard nke ANEP BOX modul arụ ọrụ mmemme dị iche iche.
Ka ịzenarị aghụghọ na-achọghị, a na-echekwa ohere ịnweta igbe ANEP site na koodu ntinye ọnụọgụ atọ:
*1 2
Onye ọrụ nwere ike ịgbanwe koodu a (ọnụọgụ 1 ruo 7) (lee ibe 16)
7.1 - Ịnweta mmemme
* Pịnye nọmba ndị dị na koodu nnweta mmemme sochiri ya
Example: (Site na ndabara ahaziri koodu na ọpụpụ ụlọ ọrụ)
* 1 2
Ngwaọrụ na-ewepụta ụda olu
Ya mere, ngwaọrụ dị na mmemme mmemme
… 2 BEEPs kwa sekọnd 20 ọ bụla
7.2 - Mmepụta ọnọdụ mmemme
Mgbe ịmechara mmemme ngwaọrụ ahụ
* Pịa igodo ""
Na njedebe nke mmemme, ngwaọrụ na-ewepụta ụda olu ụtọ
Mara: Ọ bụrụ na enweghị igodo dị na ahụigodo emetụghị maka nkeji 3, ngwaọrụ ahụ na-apụ n'ụdị mmemme.
Ngwaọrụ na-ewepụta ụda olu
14
NT_ANEP_BOX_TX_EN_31-03-2023
7.3 - Nhazi tebụl nọmba ekwentị (mkpu olu)
Igbe ANEP na-achọpụta na-akpaghị aka ọdịdị nke bọtịnụ mkpu nke igbe NO ma ọ bụ NC, ọ dị mkpa ijikọ bọtịnụ mkpu tupu ijikọ akara ekwentị.
Ahụigodo
*
MGBE
Koodu nnweta mmemme
Ikwu (koodu ụlọ ọrụ: 123)
#001# #101 #102
RES
Nọmba ekwentị + # Nọmba ekwentị + #
Tọgharia ntọala wee kpochapụ nọmba ekwentị
Nọmba ekwentị etiti oku 1st
Nọmba ekwentị etiti oku nke abụọ
#303
*
Nọmba ekwentị
Modul Nke 1-8
Mmepụta Ụdị Mmemme
Nhazi ụlọ ọrụ
Koodu mmemme: · Oge nzikọrịta ozi: · Nkwudo: · Nnwale cyclic:
*1 2
Nkeji 3 akpaaka ụbọchị 3
15
NT_ANEP_BOX_TX_EN_31-03-2023
7.4 - Nhọrọ nke netwọk ekwentị BOX TX modul na-eji netwọk ekwentị maka ịnyefe mkpu na ebe nnabata, maka ịrụ ọrụ nke ọma nke akụrụngwa ọ dị mkpa igosi ụdị netwọkụ n'etiti:
– Netwọk ekwentị gbanwere (analog PSTN), – GSM Gateway, – Autocom mode. Ịhọrọ netwọk ahụ na-emetụta njirimara ndị a: - GSM ọnụ ụzọ ámá ụgwọ ozi batrị (naanị maka ụdị PG1, PGU, P3GU na P4GU) - Njikwa okwu nke ọkà okwu na igwe okwu, - Ịchekwa ịnyefe data na ebe nnabata The Autocom mode, na-enye ohere BOX TX na-arụ ọrụ na ọtụtụ autocoms na-enweghị nkwa na-arụ ọrụ na niile autocoms na ahịa. Ụdị a na-eme ka o kwe omume: – Ịkpọ nọmba na ahịrị izu ike voltages n'etiti 20 na 28v, - emebeghị ya ma ọ bụrụ na ụgbọ oloko na-akụ karịa 400ms. 7.5 – Standard mode Ọ bụrụ na voltage nke ahịrị ekwentị Orange gị ma ọ bụ onye ọrụ ọzọ karịrị 28V, ị ga-ahazi akụrụngwa gị na “Standard Mode” (Orange Line) na Line Vol.tage (Akara Voltage> 28V) Nke a bụ ụdị nke ị nwetara akụrụngwa gị (ọnọdụ ụlọ ọrụ) Iji hụ na nke a, mee usoro mmemme ndị a. Mgbe itinye koodu ohere mmemme,
Pịa igodo # 4 0 4 # Ngwaọrụ na-ewepụta ụda olu
* Wepụ ọnọdụ mmemme site na ịpị igodo «»,
Ngwaọrụ na-ewepụta ụda olu
16
NT_ANEP_BOX_TX_EN_31-03-2023
7.6 - Ọnọdụ Autocom na/ma ọ bụ ahịrị dị ala voltage Ọ bụrụ na ejikọrọ akụrụngwa gị na ahịrị Orange (ma ọ bụ onye ọrụ ọzọ), mana ahịrị voltage na ezumike dị ala (ihe na-erughị 28V), ị ga-ahazi akụrụngwa gị ka ọ bụrụ "Autocom Mode na / ma ọ bụ Low Line Vol.tage” (20V <= Ahịrị Voltage <28V) Iji mee nke a, mee usoro mmemme ndị a. Mgbe ịbanyechara koodu nnabata mmemme, pịa igodo # 4 0 3 # Ngwaọrụ na-ewepụta ụda olu.
* Wepụ ọnọdụ mmemme site na ịpị igodo «»,
Ngwaọrụ na-ewepụta ụda olu
Ọ bụrụ na ejikọrọ akụrụngwa gị na “Autocom”, ị ga-ahazi akụrụngwa gị ka ọ bụrụ “Autocom Mode na/ma ọ bụ Low Line Vol.tage” (20V <= Ahịrị Voltage <28V)” 7.7 – GSM Mode Ọ bụrụ na ejikọrọ akụrụngwa gị na ọnụ ụzọ GSM, ị ga-ahazi akụrụngwa gị na “GSM Mode.” Iji mee nke a, mee usoro mmemme ndị a.
Mgbe ịbanyechara koodu nnweta mmemme, pịa # 4 0 5 # Ngwaọrụ na-ewepụta ụda olu
* Wepụ ọnọdụ mmemme site na ịpị igodo «»,
Ngwaọrụ na-ewepụta ụda olu Ka ị pụọ na ọnọdụ GSM wee laghachi na Ọkọlọtọ Ọnọdụ,
Pịa # 406 #
Ngwaọrụ na-ewepụta ụda olu
* Wepụ ọnọdụ mmemme site na ịpị igodo «»,
Ngwaọrụ na-ewepụta ụda olu
17
NT_ANEP_BOX_TX_EN_31-03-2023
7.8 - Usoro nhazi nọmba 7.8.1 - Ebe nchekwa mmemme 101 (Oku olu isi) Mgbe ịbanyechara koodu ntinye mmemme
Pịa # 101
Ngwaọrụ na-ewepụta ụda olu
Pịa akara ekwentị na igodo # sochiri
Ngwaọrụ na-ewepụta ụda olu ụtọ 7.8.2 - Ebe nchekwa mmemme 102 na nkwụsịtụ N'ihe banyere nrụnye n'azụ PABX, ọ dị mkpa ịkpọ prefix na-esochi nkwụsịtụ na nọmba oku.
* Ka ịtọọ oge kwụsịtụ (sekọnd abụọ), pịa « »
Example: (kwụsịtụ mgbe prefix 0)
# 102 0 0 1 4 5 6 9 2 8 0 0 Pịa « # » iji kwado
Ngwaọrụ na-ewepụta ụda olu
7.8.3 - Hichapụ nọmba
Pịa : « # » wee, nọmba ebe nchekwa na igodo “#”.
Example : (Hichapụ nọmba ebe nchekwa 102)
# 102 #
Ngwaọrụ na-ewepụta ụda olu
Cheta na : Ọ bụrụ na emeghị ihe omume ahụigodo maka sekọnd 20, ngwaọrụ ahụ na-ewepụta "BEEP", wee laghachi na mmalite nke nhọrọ nke ncheta nọmba ekwentị.
18
NT_ANEP_BOX_TX_EN_31-03-2023
7.9 - Oke nke ncheta
bouton d'alarme Mémoire 101 Mémoire 102
7.9.1 - Ụzọ mbufe
Enwere ike ịhazi ngwaọrụ ANEP dabere na ojiji achọrọ yana teknụzụ ejiri na ebe nnabata oti mkpu. Iji kparịta ụka n'ụlọ ọrụ nnabata, ngwaọrụ ANEP na-ebufe ozi (nchọpụta ọnọdụ) ma guzobe nzikọrịta ozi olu n'otu nzikọrịta ozi ma ọ bụ na nkwukọrịta abụọ dị iche.
Usoro akwadoro n'ihe gbasara ọkọlọtọ dabara na usoro dị n'otu nzikọrịta ozi (Njicha nke igbu oge maka njirimara na mkparịta ụka ụda)
7.9.2 - Tebụl maka mmemme otu oku.
Nọmba ekwentị.
Nrigbu Osisi Ike
Ebe nchekwa
Ofdị ozi
Nkwukọrịta
# 101 Onye ọrụ na oti mkpu
Data + ekwentị
#102
Oti mkpu na onye ọrụ nka
Data + ekwentị
#104
Ebuli ọdịda ọdịda Ọkachamara mbata /
Ọpụpụ Cabin Light
Data
#105
Nnwale cyclic
Data
Ebe ozi # 106
Oti mkpu na ọdịda
Data
#101: Nweta nọmba ekwentị ọdụ #102 : Nọmba ekwentị nke ihe mberede ma ọ bụ ebe nnabata nke oke mmiri #104: Nweta nọmba ekwentị ọdụ ọdụ #105: Nweta akara ekwentị ọdụ maka nnwale cyclical #106: Nọmba ekwentị nke ANEP n'ebe ọ bụla ebe ama ama ndị ahịa ma ọ bụ websaịtị.
Agbanyeghị, ọ bụrụ na ụlọ nnabata gị na-eji usoro oku abụọ, biko kpọtụrụ anyị. 7.9.3 - Na-ahazi ọnọdụ “oku abụọ”.
Ụdị oku ugboro abụọ na-enye ohere ka a kpọọ ọdụ nche (naanị olu), tupu ebunye mkpu na ebe nnabata (data na olu). A na-eji ncheta ekwentị 101 na 102 rụọ ọrụ a. N'ụdị mmemme, iji mee ka ọnọdụ oku abụọ mee:
Pịa # 206 # Ngwaọrụ na-ewepụta ụda olu Ka gbanyụọ ọnọdụ oku abụọ
tinye usoro # 207 #
19
NT_ANEP_BOX_TX_EN_31-03-2023
Ekwesịrị ịhazi ncheta “ekwentị” dị ka ndị a:
Ebe nchekwa 101: Nọmba ekwentị nche Ebe nchekwa 102: Nọmba ekwentị nke ebe nnabata.
Oge oti mkpu:
Mgbe etinyere oti mkpu, onye na-ebugharị na-akpọ nọmba dị na ebe nchekwa 101 (onye na-elekọta). Ọ na-akpọ nọmba dị na ebe nchekwa 102 (etiti nnabata).
Ọ bụrụ na ịnọ na nọmba na ebe nchekwa 101 (onye nlekọta) ma ọ bụ 102 (n'etiti nnabata), a na-akpọ nọmba ndị a ruo ugboro isii (6x mem. 101 na 6x meme. 102).
7.10 - nkwado na ntọala (na ọnọdụ mmemme)
7.10.1 - Oge igbu oge maka iburu n'uche na ịpị bọtịnụ mkpu ụlọ (second 0.5 ndabara)
Pịa # 3 0 2 # na oge akọwapụtara na nkeji iri nke nkeji. Ngwa a na-ewepụta "BEEP" 3
Jiri igodo «#» kwado. Ọpụample: 4.5 sekọnd oge. Pịa # 302 45 #
7.10.1 Nkwenye nke oku onye akpọchiri akpọchi (EN81-28) site na #1
Mgbe arụrụchara ọrụ a, onye ọrụ ga-anabatarịrị oku oti mkpu site na BOX ANEP site n'ịkpọ usoro "#" na "1" na kiiboodu ekwentị ya (na ọnọdụ DTMF) n'oge mkparịta ụka olu.
Ọ bụrụ na arụghị ọrụ a, ANEP BOX na-akpọ ebe nnabata ugboro 6 n'otu nọmba akara ngosi oku ahaziri (Lee 5.1.2)
Iji kwado ọrụ a, pịa igodo ahụ n'otu n'otu # 2 0 2 # Ngwa a na-ewepụta "BEEP" 3.
A kwadoro ọrụ nkwenye oku (anaghị akwado ya na ndabara)
Ka iwepu ntọhapụ nke mkpesa ahụ Pịa # 203 # Ngwa a na-ewepụta "BEEP" 3
A kagbuola ọrụ ịnakwere mkpesa ahụ.
20
NT_ANEP_BOX_TX_EN_31-03-2023
N'ụdị PROGRAMMING:
7.10.2 - Oge nkwurịta okwu
Oge nkata 1-99 nkeji (nhazi ụlọ ọrụ = nkeji 3) Pịa: # 2 0 1 puis ..
… tinye ogologo oge mkparịta ụka ịchọrọ (site na 1 ruo 99) na #
Ngwaọrụ na-ewepụta ụda olu
7.10.3 - Ndozi ọkwa ụda nke olu ụlọ
Mgbe emechara mmemme, kpalite oku site na ịpị bọtịnụ oti mkpu dị na ụlọ ntu maka igbe ANEP ma ọ bụ bọtịnụ.
Ntọala ndị a dị maka ịhazigharị ọkwa ụda yana igwe okwu ANEP BOX flip-flop n'okpuru ọnọdụ mpaghara.
Igodo" 6" = +
Igodo "9" =
Ntọala a na-agbanwe olu nke ọkà okwu ka ịgbagharịchara.
Igodo" 5" = +
Igodo "8" =
Ntọala a na-agbanwe nghọta nke igwe okwu
Igodo "0" na-eme ka ekwentị kwụdo. Igodo "1" na-alaghachi na ntọala ụlọ ọrụ.
Mgbanwe emere n'ụdị mgbanwe ntuziaka na-ewepụ nke emere na mbụ na ọnọdụ mgbanwe akpaaka.
7.10.4 - Ịkwado oku na-aga ugboro ugboro Pịa igodo ahụ n'usoro # 105 Ngwaọrụ na-ebunye 3 "BEEPs" Pịa nọmba oku iji nata data na ọdụ nnata nke nwere FT1000 ma ọ bụ FT4004 Modem na ANEPCENTER® ma ọ bụ ngwanrọ dakọtara n'ihu.
Pịa "#" Ngwaọrụ na-ewepụta ụda olu
A ga-enwerịrị “kaadị saịtị” tupu oge eruo na ngwa ANEPCENTER® (lee mpempe akwụkwọ ngwugwu ANEPCENTER®)
MARA : oku a na-akpọ oge na-emegharị elekere ANEP BOX-TX
21
NT_ANEP_BOX_TX_EN_31-03-2023
7.10.5 - Ndozi nke uru na Interphone Machinery na Fire Department mode.
Ikike ịhazi igwe okwu na igwe okwu n'onwe ya nke ejiri maka igwe arụ ọrụ intercom yana modul fireman. Ntọala ndị a anaghị agbanwe ntọala akọwapụtara maka ọrụ triphony ọdịnala.
Nhazi uru igwe okwu
Mgbe itinye koodu ohere mmemme
Pịa # 407 wee uru site na 1 ruo 15, wee # (1 = uru nkeji, 15 = uru kacha)
Na-emezi uru Ọkà Okwu
Mgbe itinye koodu ohere mmemme
Pịa # 408 wee uru sitere na 1 a 15, wee # (1 = uru min, 15 = uru max)
7.10.6 - Nnwale cyclic / Oge oge Pịa igodo ahụ n'usoro # 301
Ngwa a na-ewepụta "BEEP" 3
Kpọọ ọnụọgụ ụbọchị maka oge nke oku okirikiri 1, 2, ma ọ bụ 3.
Ebube: ụbọchị 3
Example : 2 ụbọchị = # 301 2 #
7.10.7 - Ige nti mgbanwe data
Iji mee ka onye na-ahụ maka ọrụ na-arụ ọrụ na elevator mara na modul ANEP-BOX na-ekwurịta okwu na ebe a na-anabata ndị ọbịa, a na-anụ ihe niile na-agbanwe data (Low Level) na ụda ụda nke ANEP-BOX.
DỊ MKPA: Ọ dịghị ihe ga-ekwe omume na ANEP-BOX n'oge usoro nkwurịta okwu.
7.10.8 - Gbanwee koodu nnweta mmemme
Pịa igodo otu ugboro # 0 0 2 Ngwa a na-ewepụta "BEEP" 3
Tinye koodu mmemme ọhụrụ (site na mkpụrụ edemede 1 ruo 7) yana «#» Ngwa ahụ na-ewepụta “BEEP 3”
Kwenye koodu mmemme ọhụrụ (ọnụọgụ 1-7) yana «#» Ngwaọrụ na-ewepụta ụda olu
Ọ dị mkpa iji nlezianya rịba ama koodu ọhụrụ emebere. Ọnwụ nke ikpeazụ na-eme ka nlọghachi nke ngwa ahụ na ụlọ ọrụ mmepụta ihe.
22
NT_ANEP_BOX_TX_EN_31-03-2023
7.10.9 - Ngụ oge njikwa ọkụ ụlọ
?
ANEP-BOX TX na-enye ohere ijikwa voltage “Cabin Light” (230Vac) Mmejọ na nloghachi nke voltage na-ebunye ya na nnabata ọdụ ọkụ (Ebe nchekwa ekwentị 104).
Oge igbu oge maka iburu n'uche nloghachi nke voltage atọrọ na 2 min. Oge igbu oge maka iburu mmejọ ahụ n'uche bụ mmemme.
Na ọnọdụ mmemme, pịa # 304 wee kọwaa oge akọwapụtara na nkeji (site na 0 ruo 99) - ANEP-BOX na-ewepụta 3 “BEEPs.
Kwado site na igodo #
Mgbe ngụ oge bụ 0, anaghị edozi ntụpọ "Cabin Light" (Ntọala ụlọ ọrụ)
7.10.10 - Ọkụ mbata dị ka ntinye mmalite/Ọgwụgwụ nleta Nleta
Enwere ike iji ntinye ọkụ Cabin iji gosi mmalite/njedebe nleta nlekọta mgbe ntọala "Cabin Light Tempo" bụ efu.
Mmalite nke nleta Interview
Ọnụnọ nke voltage (5V ruo 220V) na ntinye maka sekọnd ise na-eme ka mmalite nke nleta nlekọta.
Ekwuru na ozi olu "Technician Arrival" · Mbufe ihe omume "Presence Technician Presence
maka nleta mmezi” na-ewepụ nkeji ise.
Ọgwụgwụ nleta Interview
Ọnwụ nke voltage na ntinye maka sekọnd ise na-egosi njedebe nke "Ndozi Ọnụnọ".
· Ekwuputara ozi olu "Ọpụpụ Teknụzụ".
· Mfefe nke ihe omume "Ọhụụ Nkà na-ahụ Maka Ọpụpụ" adịghị akwụ ụgwọ.
Ọrụ ọkụ Cabin
Ntinye CABIN LIGHT na-ejigide ọrụ ya "Cabin Light Control" mgbe oke "Cabin Light Tempo" abụghị efu.
23
NT_ANEP_BOX_TX_EN_31-03-2023
8 - Mgbugbu
8.1 - Nnwale mkpu ụlọ
Pịa bọtịnụ oti mkpu na ụgbọ ala. Ọ bụrụ na akwadoghị ịkpa ókè, a na-agbasa ozi olu “a na-edekọ oku gị, biko chere” ma ANEP BOX na-akpọ onye nta akụkọ (lee ibe 8)
A na-ewepụta “BEEPs” kwa sekọnd isii ọ bụla ma ọ bụrụ na agbachiri nkịtị iji gosi na ngwaọrụ ahụ dị n'ịntanetị
Iji mee ka ịgbalite onye njem n'ime mkpu ụgbọ ala, nwalee:
- Mechiri emechi ma ọ bụ na-arụ ọrụ - akwadoro ọnụnọ ndị ọkachamara - Oti mkpu amanye
Ọgwụgwụ ụgbọ ala na-akpaghị aka:
Na-eso oti mkpu onye ọrụ egbochiri n'ime ụlọ, enwere ike ịme ngwụcha mkpu na-akpaghị aka:
- Ma ọ bụ mgbe oge igbu oge nke 1 hour, - Ma ọ bụ mgbe 2 na-agba ọsọ nke ụlọ na 2 ụzọ oghere.
Iji kwado ọrụ a, tinye usoro mmemme wee dezie usoro "#706#"
Ka ị ghara ịkwado ọrụ a, tinye usoro mmemme wee dezie usoro "#707#"
N'oge njedebe nke mkpu na-akpaghị aka, a na-ekwupụta ozi "Njedebe nke mkpu" site na nchịkọta olu, a na-ebufe ozi "Ọdịnihu nke mkpuchi akpaaka" site na ebe nchekwa ekwentị 104. "Njedebe nke mkpu" nwere ike ime mgbe niile na mpaghara site na bọtịnụ akwụkwọ ndụ akwụkwọ ndụ ma ọ bụ site na ANEPCenter.
A na-agbanwegharị oge nkwụsị nke elekere 1 site na ANEPCenter. (Mgbe ịlaghachiri na ntọala ụlọ ọrụ (#001#), arụghị ọrụ njedebe mkpuchi akpaaka.)
8.2 - Oti mkpu onye na-ahụ maka ụlọ ụlọ Pịa bọtịnụ mkpu na modul ANEP BOX.
A na-agbasa ozi olu "A na-edekọ oku gị, biko chere" ANEP BOX na-akpọ nnabata ahụ. A na-ewepụta “BEEPs” kwa sekọnd isii ọ bụla ma ọ bụrụ na agbachiri nkịtị iji gosi na ngwaọrụ dị n'ịntanetị
24
NT_ANEP_BOX_TX_EN_31-03-2023
8.3 - Nkwụghachi onwe ya (Ụdị okwu)
Ịkpọgide ekwentị na-apụta na-akpaghị aka mgbe achọpụtara ọnụnọ ahịrị ekwentị ma ọ bụ oge mmecha (nkeji 3) ndabara.
Igbe ANEP na-ewepụta ụda olu sekọnd iri tupu njedebe nke nzikọrịta ozi akwadoro (lee ibe 15).
8.4 - Usoro Nọmba oku
Ọ bụrụ na nọmba akpọrọ na-arụ ọrụ ma ọ bụ na-azaghị (ụdaolu 10), BOX TX kpọọ nọmba echekwara nke abụọ.
A na-akpọ nọmba ekwentị ọ bụla ahaziri ahazi ugboro isii.
8.5 - Njirimara bọtịnụ Green
1- "Technician Presence" ọrụ
Bọtịnụ akwụkwọ ndụ akwụkwọ ndụ maka ọnụnọ ndị ọrụ nka na-eme ka ntinye aka nke etiti ọnụnọ onye ọrụ nka na mbuli elu. Ịpị bọtịnụ na-akpalite ọkwa ọkwa "Onye Nkà na ụzụ" na-esote oku maka ozi. Nkwado nke abụọ na-ebute ọkwa “Ọpụpụ onye nka na ụzụ olu” na-esote oku maka izipu ozi.
2- «Njedebe nke mkpu» ọrụ N'ihe omume nke onye ọrụ mkpu na-aga n'ihu, na ịpị green button mechie onye ọrụ mkpu, a olu ọkwa na-agwa ndị technician ọgwụgwụ nke mkpu (arụsi ọrụ ike ịkpa ókè ma ọ bụrụ na mmemme).
3- Olu "Ọrụ nkesa"
Ọrụ nkesa olu hụ paragraf 7.
25
NT_ANEP_BOX_TX_EN_31-03-2023
9 - Ọrụ Igbe TX
Ụdị TX nke ANEP BOX gụnyere atụmatụ niile nke ụdị TA wee gbakwụnye:
1 - Nkwekọrịta olu na ịgbalite mkpu onye ọrụ egbochiri, 2 - Ọrụ "Oti mkpu" (HP na ọrụ buzzer) 3 - Ọrụ nkwupụta ala, 4 - mbata na ọpụpụ nke onye ọrụ nka, 5 - Ohere nke icheta ọnụnọ site na ozi olu mgbe niile.
onye ọrụ nka, 6 - Ikike ịgbasa ozi olu mgbe ọ kpalitere mkpu ụlọ,
ruo mgbe onye na-ahụ maka nkà na-anabata oti mkpu, 7 - Ọnụ ụzọ «Cabin Light», 8 - Nchọpụta ụda olu nke ọnọdụ mkpu n'oge oku.
9.1 - egbochiri njikọ olu na mkpu onye ọrụ
Iji mee ka obi sie onye ọrụ ahụ tọrọ n'ime ụlọ ahụ, ANEP BOX TX na-agbasa ozi nchịkọta, mgbe nkwenye nke itinye n'uche nke mkpu "egbochi onye ọrụ", na-esote ịpị bọtịnụ mkpu nke elevator.
9.2 - Oti mkpu siren A na-arụ ọrụ "Oti mkpu" arụnyere n'ime ANEP-BOX TX mgbe ọ kpalitere mkpu n'ọnọdụ abụọ:
1 - Mgbe oku ekwentị emezughị, na njedebe nke oku a nwara.
2 – Ngwa ngwa mgbe agbanyere oti mkpu mgbe achọpụtara mbelata n'ahịrị ekwentị voltage (Voltage ihe na-erughị 28 Volts) nke na-egosi na ma eriri ekwentị enweghị ntụpọ, ma ọ bụ igbe ọzọ na-eji otu ahịrị ekwentị nọ n'okpuru mkpesa.
Oge ịgbalite bụ 6 sekọnd na ọkà okwu ahọpụtara bụ nke agbakwunyere na ANEP-BOX (ụlọ elu)
Njirimara a chọrọ ọkụ ọkụ 12Vcc (ALIM-CONTROL 2 ụdị).
9.2.1 - Ikike ịgbalite siren mgbe ọ bụla pịa bọtịnụ mkpu ụlọ.
Ma a kpasuru mkpu ma ọ bụ na ọ bụghị, a na-eburu n'uche mkpu ụlọ ahụ nwere ike igosi ya site na ịgbalite siren agbakwunyere maka sekọnd 2.
Ịkwado ọrụ siren Mgbe itinye koodu ohere mmemme Pịa #401#
Nbibi nke siren ọrụ Mgbe itinye koodu ohere mmemme Pịa #402#
26
NT_ANEP_BOX_TX_EN_31-03-2023
9.3 - Ịtọ ntọala BOX TX Module Clock Na ọnọdụ mmemme, pịa igodo # 601 83 `hh' `mm' nke ọma,
* ANEP BOX-TX na-ewepụta "Gong",
Mechaa site na ịpị ugboro abụọ (hh na mm na-anọchi anya iri nke awa, awa, iri nkeji na nkeji) Ex.amples : Maka mgbanwe na 3:48 pm => # 601 83 15 48
Maka mgbanwe n'elekere 7:30 nke ụtụtụ => # 601 83 07 30 Maka mgbanwe n'elekere 9:05 nke ụtụtụ => # 601 83 09 05 9.3.1 - Ịgụ oge mpaghara na usoro mmemme, pịa igodo nsochi # 602 83 # ANEP-BOX TX na-ekwupụta oge na nkeji 4.ample : 12:09 pm => a ga-ama ọkwa «OTU», « ABỤỌ », «ATO», «Uniteine» 9.4 – Nkwuputa ala ANEP-BOX TX gụnyere ikike ịkpọsa ala n'oge mmeghe nke ọnụ ụzọ. Njirimara a chọrọ ọkụ ọkụ 12VDC (ụdị ALIM-CONTROL 2). Enwere ike ịhazi ma nyochaa nkwupụta ndị gbadoro ụkwụ na ọkwa site na ANEPCenter®.
27
NT_ANEP_BOX_TX_EN_31-03-2023
ZP-RECAL
OD
CD
9.4.1 - Nkwado nke nkwupụta
Na usoro mmemme, - Pịa igodo n'usoro # 603 # nkwupụta ala n'oge imeghe ọnụ ụzọ ahụ, a ga-agbasa ozi na-ekwupụta mmechi ọnụ ụzọ site na elekere 8:00 ruo 8:00 ehihie ma ọ bụ na-adịgide adịgide.
9.4.2 - Mmebi nke nkwupụta
N'ụdị mmemme, - Pịa igodo nke ọma # 604 # agaghị akwado nkwupụta ala na ozi na-ekwupụta mmechi ọnụ ụzọ.
9.4.3 – Mmemme Ọkwa Ahụigodo
Site na ndabara, stagA na-echekwa nkwupụta maka ọkwa ọ bụla na BOX TX
Maka ikpe pụrụ iche, ọ ga-ekwe omume ịgbanwe ọnọdụ mgbasa ozi iji kwado nkwupụta na mbuli elu.
Onye nrụnye nwere ike ịgbanwe ọnọdụ akọwapụtagoro nke mgbasa ozi (site na 1 ruo 39)
Tupu ịmalite mmemme, jupụta tebụl (ibe na-esote) na ntinye aka nke ọkwa ndị a ga-ekwu maka ọkwa ọ bụla.
Iji hazie ọkwa usoro bụ: # 601 «n» # «a» #
«n» bụ ọkwa, «a» bụ ntụaka ndepụta.
Ụkpụrụ ndị a sitere na 1 ruo 39 gụnyere.
28
NT_ANEP_BOX_TX_EN_31-03-2023
Ọkwa ọkwa ndepụta aha ezighi ezi
39
Ala nke mbụ
38
Ala nke 30
37
Ala nke 29
36
Ala nke 28
35
Ala nke 27
34
Ala nke 26
33
Ala nke 25
32
Ala nke 24
31
Ala nke 23
30
Ala nke abụọ
29
Ala nke mbụ
28
Ala nke 20
27
Ala nke 19
26
Ala nke 18
25
Ala nke 17
24
Ala nke 16
23
Ala nke 15
22
Ala nke 14
21
Ala nke 13
20
Ala nke 12
19
Ala nke 11
18
Ala nke 10
17
Ala nke 9
16
Ala nke 8
15
Ala nke 7
14
Ala nke 6
13
Ala nke 5
12
Ala nke 4
11
Ala nke 3
10
Ala nke abụọ
9
Ala nke mbụ
8
Ala ala
7
okpuru ulo 1st
okpuru ulo nke 62
okpuru ulo nke 5 3
4
okpuru ulo nke anọ
3
okpuru ulo nke anọ
2
okpuru ulo nke anọ
1
okpuru ulo nke anọ
Ọkwa "n"
39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8
Nd ndezi ndetu ka ịhazi “a”
29
NT_ANEP_BOX_TX_EN_31-03-2023
Mgbasa ozi n'etiti elekere asatọ nke ụtụtụ ruo elekere asatọ nke abalị,
N'ụdị mmemme, pịa igodo n'usoro # 602 81
* Kwado site na #, nchịkọta a na-ewepụta «gong»,
Mechaa site na ịpị igodo ugboro abụọ. Mara : A ga-emerịrịrịrị elekere ANEP BOX TX site na ịkpalite a
cyclical oku.
9.4.4 - Ngosipụta oge ọkwa ọkwa nke ala
Ozugbo ịbanye na mmemme mmemme, LED amber-green na-egosi oge nke stage kwuru okwu.
- Green LED On: Mgbasa nkwupụta ala n'etiti elekere asatọ na elekere asatọ nke abalị - Yellow LED On: Mgbasa nkwupụta ala 24 awa kwa ụbọchị - Enweghị ọkụ On : Uncommitted stage nkwupụta nkesa
10 – OKWU OKWU OKWU NDỊ MMADỤ / MAKA MMADỤ
Mgbe agbanyere mkpu ụlọ, a na-echekwa "Oti mkpu na-aga n'ihu" ruo mgbe ịpịrị bọtịnụ nnabata nke onye ọrụ aka.
ANEP-BOX TX na-enye ohere ịkpọsa n'ime ụlọ ahụ "Oti mkpu na-aga n'ihu" na "Technician Arrival" na mmechi ọnụ ụzọ ọ bụla na isi ọkwa (RdC base) A ga-agbasa ọkwa ọrụ ndị a n'otu oge ahụ nkwupụta ala (lee nkwupụta ala mmemme)
10.1 - Nkwado nke mgbasa ozi "Oti mkpu na Ọganihu" & "Technician Arrival"
N'ụdị mmemme, pịa igodo otu ugboro # 605 #
10.2 - Nbibi nke «Oti mkpu na-aga n'ihu» na «Technician mbata» ọkwa.
N'ụdị mmemme, pịa igodo otu ugboro # 606 #
A naghị ewepụta ọkwa «Technician Arrival» na akpaghị aka mgbe onye ọrụ na-ahụ maka ọrụ nọ mana ọkwa a ka dị irè mgbe pịa bọtịnụ teknụzụ.
10.3 - Nkwenye mkpu ụlọ
Ọ bụrụ na mkpu ụlọ na-aga n'ihu, pịa bọtịnụ Technician na-ebute ọkwa «End Alarm» wee wepụ ebe nchekwa «Oti mkpu» na-aga n'ihu.
30
NT_ANEP_BOX_TX_EN_31-03-2023
10.4 – Remote “Oti mkpu na-aga n’ihu” Tọgharia ANEP-BOX TX na-agbakwunye ọrụ “Njedebe nke mkpu onye ọrụ kpatara n'ime oge”. - Onye ọrụ na-ebute nnabata site na AnepCenter mgbe "Oti mkpu onye ọrụ egbochiri n'ime ụlọ" esoghị na saịtị "Njedebe Mkpu". - Mgbe ị nwetachara nkwenye dịpụrụ adịpụ site na AnepCenter, Igbe ahụ na-ewepụta oku ọhụrụ nwere aha: "ọdịdị: Ọgwụgwụ nke Mkpu Okpueze"
Récapitulatif des intitulés selon les modes d'activation de la fin d'alarme : – Cabin Alarm => Ọdịdị: Cabin Mkpu - Ọgwụgwụ mkpu (omume na bọtịnụ igbe akwụkwọ ndụ akwụkwọ ndụ) => Apụọ: Ụlọ mkpu - Oti mkpu n'ebe dịpụrụ adịpụ => Ọpụta: Nkwụsị Mkpuchi Mpụ
10.5 - Mbufe ihe omume na koodu pụrụ iche A na-eme nnyefe nke ihe omume ndị a nkeji 5 ka ha pụtachara:
– Mpụta Technician ọnụnọ. – Ụlọ oti mkpu na-apụ apụ. - Ọkachamara ọnụnọ ọnụnọ maka nleta nlekọta. – Kabinet njikwa ọnụnọ ọnụnọ. - Emere ihe omume "Ọkachamara Ọdịdị" site na ịpị igodo Green
ANEP BOX TX + (Ọkachamara, Ọgwụgwụ Mkpu, SVA). – Ihe omume “Ọhụụ Cabin Oti mkpu” bụ nke igodo akwụkwọ ndụ akwụkwọ ndụ na-akpata
ANEP BOX TX+ ( Ọkachamara, Ọgwụgwụ Mkpu, SVA).
* - Ihe omume "Onye na-ahụ maka ọdịdị ihu maka nleta nlekọta" kpatara ntinye na keyboard ANEP BOX TX + nke usoro «64570».
* – Ihe omume “Apearance Presence Cabinet de Comptrollership” mere site na ntinye igodo ANEP BOX TX + nke usoro «12456».
A na-ebufe ihe omume "Onye na-ahụ maka teknụzụ na-adịghị ahụ anya" ozugbo. Ọ bụrụ na ihe omume a mere n'ime nkeji 5 nke ihe ọ bụla n'ime ihe ndị a dị n'elu mere, a na-ebufe ihe omume ndị na-echere nnyefe tupu oge eruo.
31
NT_ANEP_BOX_TX_EN_31-03-2023
11 - Nchọpụta ONLINE nke Ebe Oku
ANEP-BOX TX na-etinye ọrụ njirimara ọnọdụ oku dabere na okwu. Ọ ga-ekwe omume na n'oge mkparịta ụka ekwentị n'etiti onye tọrọ n'ime ụlọ ebuli elu na onye na-arụ ọrụ nke ụlọ ọrụ mberede, ANEP BOX TX modul ga-enye ozi iji chọta ebe oku mberede. Enwere ike ikwu ụdị ozi olu abụọ: – Mgbasa ozi etinyere dịka mkpụrụedemede redio mba ụwa, nke a ga-akpọ «Digital Identification» kacha nke mkpụrụedemede 8 nke nọmba ntinye ma ọ bụ ntụaka ka a ga-egosipụta n'okwu. (A: Alfa, B: Bravo,…, Z: Zulu, 1: otu, 2: abụọ, 3: atọ,…) – Ozi e dekọburu nke edekọ, nke a ga-akpọ “nchọpụta edekọ” (ebe adreesị ngwaọrụ) Enwere ike hazie ID dijitalụ wee gụọ ya na mpaghara ma ọ bụ n'ime ngwa site na ngwa ANEPCenter. 11.1 - Mmemme njirimara keyboard Na ọnọdụ mmemme, - Pịa igodo # 501 n'otu n'otu, - ANEP-BOX TX na-ewepụta beeps 3, - Tinye ntụaka nrụnye, - Kwado site na #. 11.2 - Ịgụ njirimara site na keyboard Na ọnọdụ mmemme, - Pịa igodo # 502 # nke ọma, - ANEP-BOX TX na-ewepụta koodu njirimara. A na-eme ndekọ ahụ site na set ekwentị.
32
NT_ANEP_BOX_TX_EN_31-03-2023
11.3 - Ịchekwa site na NJ echekwara Onye ọrụ nwere ike ịdekọ ma gee ntị na ozi sitere na ekwentị site na iji ụdị oku abụọ: - Mgbe ANEP-BOX TX malitere oku na-eso nnyefe nke oti mkpu na ngwa ngwa onye ọrụ na-enwe mkparịta ụka ụda na saịtị ahụ, usoro ndekọ nwere ike ịmalite. (lee n'okpuru: Usoro ndekọ) - Mgbe onye ọrụ na-akpọ ANEP-BOX TX. - Ọ bụrụ na ọ bụ naanị otu ANEP-BOX TX ejikọrọ n'ahịrị ekwentị: · Chere iburu igbe ahụ. · Mgbe ahụ chere 3 sekọnd maka a «Beep» ga-nụrụ na ekwentị. Usoro ndekọ nwere ike ịmalite. (Lee n'okpuru: Usoro ndekọ) N'ọnọdụ ebe ọtụtụ ANEP-BOX TX nọ n'otu ahịrị ekwentị, BOX nwere nọmba modul dị iche iche (1: isi igbe, 2 ruo 8: igbe nke abụọ) na naanị igbe nke isi na-akwụsị na mbụ: · Chere ka ebuli igbe isi. Mgbe ahụ chere 3 sekọnd ka a nụ ụda Beep na ekwentị. · Ọ bụrụ na e bu n’obi idekọ maka igbe a, usoro ndekọ nwere ike ibido. Ọ bụrụ na ịchọrọ ịdekọ na igbe nke abụọ, ị ga-eme ya n'oge ahụ pịa koodu ọnụọgụ abụọ iji họrọ igbe achọrọ. Ọnụọgụ nke mbụ bụ ọnụọgụ igbe nke abụọ (site na 2 ruo 8) na ọnụọgụ abụọ.
ga-abụ "1" maka ngwa a. Chere ihe dị ka sekọnd 5 ka a nụkwa Beep ọhụrụ na ekwentị. Enwere ike ịmalite usoro ndekọ na igbe nke abụọ a.
33
NT_ANEP_BOX_TX_EN_31-03-2023
Usoro ndekọ: - Pịa igodo "##" na ekwentị, ụda ANEP-BOX TX. – Iji malite ndekọ, pịa bọtịnụ “7” na ekwentị. – Ka ịkwụsị ndekọ, pịa igodo “8”. – Iji gee ndekọ ahụ, pịa igodo “9”. - Oge ndekọ kachasị bụ 12 sekọnd. - Enwere ike ịmegharị usoro nchekwa ahụ ọtụtụ ugboro na-enweghị iweghachi "##". – Iji pụọ na ọnọdụ a, pịa igodo “0”. - Ọ bụrụ na enweghị igodo ekwentị pịnyere maka afọ 30, pịagharịa usoro "##" iji nwalee ọrụ ahụ. 11.4 – Mgbasa njirimara Na-esochi mgbasa ozi mkpu na mgbe ebufechara akara ekwentị na ọdụ onye ọrụ, onye ọrụ ga-pịa igodo “3” na ekwentị ya ka ịnụ njirimara ahụ. Mgbe emebere ya, ID dijitalụ na-ebute ụzọ karịa ndekọ ahụ, a ga-agbasakwa ID nke nwere mkpụrụedemede redio.
* Wepụ ụlọ ọrụ, ma ọ bụ soro usoro ahụigodo ”123 #001#” (laghachi na
Ntọala ụlọ ọrụ), ehichapụla ID dijitalụ.
34
NT_ANEP_BOX_TX_EN_31-03-2023
Sample Programming :ProgrammingDeviceNo=>«ANEP94» Pịa # 501 The deviceemits3«BEEPs»
Pịa "2" igodo ugboro abụọ na-echere"BEEP"
Pịa "6" igodo3 ugboro na-echere"BEEP"
Pịa"3" igodo3 ugboro na-echere"BEEP"
Pịa "7" igodo ugboro abụọ na-echere"BEEP"
Pịa"9" igodo1 ugboro na-echere"BEEP"
Pịa"4" igodo1 ugboro na-echere"BEEP"
Pịa "#" igodo imezi njikwa ebe nchekwa olu sịntetik:
Ọgụgụ # 502 #
35
NT_ANEP_BOX_TX_EN_31-03-2023
12 – Nnwale onye na-ekwu okwu na igwe igwe
A na-eme ule a: - N'oge oku na-aga n'otu oge na naanị ikpe ebe MIDIS Plastron ma ọ bụ BOX BA MAX ma ọ bụ mini-GHP jikọtara ya na igbe, (anaghị arụ ọrụ na igwe okwu dịpụrụ adịpụ) - Ma ọ bụ na oku nke igbe igbe site na onye na-arụ ọrụ maka ngwọta nke obi abụọ.
12.1 – Nnwale na «oku ugboro ugboro» Nnwale ahụ mejupụtara na-ebufe ugboro nke 1 kHz maka 4 sekọnd na ọkà okwu, na-anakọta ya n'ime igwe okwu ma nyochaa mgbaama natara. Mgbe anataghị mgbaama ahụ nke ọma, a na-eme nnwale ọhụrụ. N'ọnọdụ nke ntụpọ "HP/Microphone", a ga-akpalite mkpu na taịbụ site na ịgbalite mermaid agbakwunyere n'ime igbe iji dọọ aka ná ntị maka adịghị arụ ọrụ, na-esote usoro mkpesa nkịtị. 12.2 - Onye na-arụ ọrụ na-achọ nnwale na-ebuli obi abụọ banyere ịrụ ọrụ nke ọma nke ọkà okwu / Micro Cabin ga-ekwe omume na anya. N'oge ule dịpụrụ adịpụ, ma ọ bụ na-anwale onye na-ekwu okwu Plastron ma ọ bụrụ na a na-anwale onye na-ekwu okwu agbakwunyere na Igbe na-anọghị Plastron. Nnwale ahụ gụnyere ịnyefe ugboro 1 kHz maka sekọnd 4 n'ime igwe okwu, kpokọta ya n'ime igwe okwu wee ziga ya na ahịrị ka onye ọrụ na nkwukọrịta gee ntị.
Usoro bụ nke a: - Kpọọ ahịrị ekwentị Igbe ahụ
Ọ bụrụ na ọ bụ naanị otu ANEP-BOX TX ejikọrọ na akara ekwentị: - Na-eche ka igbe ahụ bulie. – Mgbe ahụ chere 3 sekọnd maka a «Beep» ga-nụrụ na ekwentị. Pịa bọtịnụ «6» na ekwentị, ugboro 1kHz ga-abụ nke a na-anụ.
N'ọnọdụ ebe ọtụtụ ANEP-BOX TX nọ n'otu ahịrị ekwentị, BOX nwere nọmba modul dị iche iche (1: BOX master, 2 ruo 8: BOX secondary) yana onye isiBOXland site na mmalite:
- Chere ka ebuli igbe ukwu. – Mgbe ahụ chere 3 sekọnd maka a «Beep» ga-nụrụ na ekwentị. – Ọ bụrụ na ule bụ maka igbe a, pịa igodo «6» na ekwentị, ugboro nke 1kHz ga-nụrụ. – Ọ bụrụ na ule bụ maka igbe nke abụọ, ozugbo «Beep» gachara, pịa 2-digitcode họrọ nke achọrọ BOX.
Igbe nke abụọ (site na 2 ruo 8) na ọnụọgụ abụọ. Nọmba a ga-abụ "1" maka ngwa a. – Chere ihe dị ka 5 sekọnd maka ọhụrụ «Beep» ka a nụrụ na ekwentị. Pịa bọtịnụ «6» na ekwentị, ugboro nke 1kHz ga-abụrịrị
nụrụ.
36
NT_ANEP_BOX_TX_EN_31-03-2023
13 – TX VERSION GAARAVIEW
Ngwaahịa ANEP BOX TX na-agụnye usoro nlekota oru nke ozi-eziga ozi (ebuli ma ọ bụ ngwaahịa malfunctions) remotely site na netwọk ekwentị (Wired ma ọ bụ GSM).
Ọrụ nke akụkụ «ebuli elu» nke ANEP BOX TX chọrọ ọtụtụ presets (akwụkwọ ntuziaka ma ọ bụ akpaka) tupu nrigbu.
Nsonaazụ nleba anya nke mmemme mbuli elu dabere ozugbo nke ANEP BOX TX, ọ dị mkpa na paragraf dị iche iche nke usoro inye ọrụ bụ ihe nke onye na-ahụ maka ọrụ na-arụ ọrụ ahụ jikọtara.
Ulo ala nke abuo nke 3rd
Ọgwụgwụ-Njem MAGNET (50mm) Elu
Ihe dị mkpa: Tupu ịga n'ihu na ntinye nke ANEP BOX TX, ọ dị mkpa iji waya ntinye E1 ruo E4 dị ka e gosiri na ibe 6, a na-eme njikwa ọrụ nke ebuli site na ọnụ ụzọ anọ a. (Ọnọdụ ụlọ & ọnọdụ ọnụ ụzọ)
ALA ALA ALA 1ST
IHE: mmalite ndọta (200mm)
ka na isi larịị
Iji chịkwaa njedebe nke agbụrụ Top & Bottom ọ dị mkpa ịgbakwunye 2 magnets nke 5 cm na njedebe.
1ST BASEMENT
ỌJỤJỤ ỌJỤRỤ-Njem MAGNET (50mm) ala
37
NT_ANEP_BOX_TX_EN_31-03-2023
13.1 - Njikwa nhazi 13.1.1 - Njikwa ozi ọnụ ụzọ
A ghaghị ilekọta nlezianya pụrụ iche iji dozie ihe mmetụta OD / CD, hụ na kọntaktị na-anọgide na ọnọdụ achọrọ na njedebe nke oghere na mmechi. Ọmụmaatụ: Mwepụta igwe siri ike ma ọ bụ ọnụ ụzọ ụgbọ mmiri na ezumike. 13.1.2 - Nyochaa usoro onyunyo iji chịkwaa ọrụ nlekota ANEP BOX TX elevator 13.1.2.1 - Nyochaa nkwado ọnọdụ nleba anya:
Ọrụ # 703 #, mgbasa ozi ANEP BOX TX+ «VALIDATED» Ọ bụrụ na ọ bụghị, hụ Isi nke 12.1 - Elevator Monitoring. Lelee nhọrọ nke ụdị ọnụ ụzọ.
Ọrụ # 601 7 #, ANEP BOX TX+ «Automatic» ma ọ bụ «Swing» mgbasa ozi Ọ bụrụ na nhọrọ adabaghị, rụtụ aka na isi 12.1- elevator nlekota. 13.1.2.2 - Lelee ọrụ nke nchịkọta: - Agaghị enwe nkwupụta ala mgbe a na-ebugharị ụlọ,
ma ọ bụghị, lelee ntọala kọntaktị CD (Njedebe nke mmechi ọnụ ụzọ ụgbọ mmiri). – Dakọtara na nkwupụta nke stages mgbe imeghe ọnụ ụzọ stages (mmeghari na nkwupụta na-ezo aka na Isi nke 8.4 STAGE nkwupụta) - Mgbe ọnụ ụzọ meghere, a gaghị enwe nkwupụta ọ bụla maka mmetụta ahụ
ụzọ" tupu ọnụ ụzọ amalite imechi. Hapụ igwe mbuli elu na ebe a na-adọba ụgbọala nkịtị maka nkeji 7, ọ gaghị enwe oku kpalitere (na-ege ntị maka nnyefe DATA).
Nnwale ọdịda : Gbochie ụlọ n'etiti ala wee chere nkeji 7, ANEPBOX ga-akpọrịrị ma zipụ mmebi «ụlọ egbochiri n'etiti ala», lelee anya nleba anya maka mbata nke ihe omume ahụ. Mgbe mmegharị abụọ gasịrị, a ga-ezigarịrị njedebe ọdịda oku. Nleba anya ka ịkpọku mmachi (4 outages kwa ụbọchị), lee Isi 12.2 nkwado mmemme.
38
NT_ANEP_BOX_TX_EN_31-03-2023
14 – Okpokoro Igodo akara
**
#0…
Ịnweta na ịpụ na ọnọdụ nhazi + Ịtụgharị gaa na ọnọdụ ntọlite mmepụta ihe omume
Ịtọ ntọala
#001# Tọgharia ntọala na nọmba ekwentị #002…# Koodu nnweta ọhụrụ
#1…
Nọmba ekwentị
#101…##102…##103…##104…#105…##106…#
Nọmba ekwentị nke izizi maka oku olu Nọmba ekwentị oku ndabere nọmba ekwentị nke ọdụ nnata maka ịnyefe data n'ihu olu Nọmba ekwentị nke ọdụ nnata iji bufee data mgbe olu gachara Nọmba ekwentị nke ule cyclic na-akpọ Internet ekwentị Nọmba ekwentị.
#2…
#201…##202##203##204##205##206##207#
Nkwukọrịta
Oge nzikọrịta ozi oku (Nkeji 1-99) Onye na-arụ ọrụ kwetara ọrụ oku akwadoro ọrụ nnabata oku nke onye ọrụ akwadoghị nrụnye ọnọdụ Duplex zuru oke Mmebi nke ọnọdụ duplex zuru ezu na-akwado ọnọdụ “oku ugboro abụọ” na-eme ka ọnọdụ “oku ugboro abụọ” rụọ ọrụ.
#3…
Melite
#301…# #302…# #303…# #304…# #307# #308# #309#
#4…
#401##402##403##404##405##406##407##408##
Ugboro ugboro ule cyclic (1, 2 ma ọ bụ 3 ụbọchị) Oge nzaghachi mkpu (10-64 na 1/10 sk) Adreesị Modul (1-8) Oge ewepụtara iji buru n'uche n'ọnụ ụzọ Cabin Light (0 ruo 99 min) Enweghị ịkpa ókè ụlọ mkpu ịkpa ókè nke mkpu ụlọ na-edozi site na ịkpa ókè igbe igbe igbe (DISC)
Melite
Ịkwado ọrụ siren ahụ Nbibi nke ọrụ siren AUTOCOM Mode Standard Mode GSM Nkwado Mmebi nke ụdị igwe okwu GSM na-emezi uru igwe okwu.
39
NT_ANEP_BOX_TX_EN_31-03-2023
15 - Ahụigodo tebụl nhazi oge (Na-aga n'ihu)
#5… #501…# #502…#
Nchọpụta saịtị
Mmemme koodu njirimara Mgbasa nke koodu njirimara site na ụda olu
#6…
Nkwupụta ala
#601 n# a# If"n"na"a"rebettween1na39:mmemme nkwupụta ala.
#601 83 …# Oge (awa na nkeji)
#602 n# Ọ bụrụ na "n" dị n'etiti1 na39: mgbasa ozi nkwupụta site na ụda olu
#602 81# Limitationoffloorstatementsandmessagesfrom8:00a.m.to8:00p.m.
#602 82# Nkwupụta nke stages na ozi 24/24h
#602 83# Oge ịgụ ihe
#602 9n# Synthesis ụda larịị mmezi («n» site 1 ruo 8)
#603#
Ọrụ nkwupụta ala kwadoro
#604#
Ekwenyeghị ọrụ nkwupụta nke ala
#605#
"Oti mkpu na-aga n'ihu" na "Technician Arrival" kwadoro nkwupụta ozi
#606#
Nkwupụta ozi «Oti mkpu na Ọganihu» na «Technician Arrival» akwadobeghị
#6…
Nleba anya anya
#601 4 nn# Usoro nkwenye mmejọ #601 5 nn# Usoro mmechi mmejọ #601 nn# Ịgụ mmemme nke ntụpọ #602 6 n# Oge nhazi oge na-adịghị arụ ọrụ ("n" site na 0 ruo 7)
# 602 5 n # Ịmepụta ọnụ ọgụgụ kachasị elu nke ọkwa ( "nn" site na 0 ruo 20 ) #602 41# Nchikota nke igwe mbuli elu #602 71 # Ọnụ ụzọ akpaaka #602 72 # ọnụ ụzọ na-agbagharị #601 7# Ụdị ọnụ ụzọ ọgụgụ
#7…
#701##702##703##706##707#
Nleba anya n'ime obodo kwadoro
Nleba anya n'ime ime obodo na-akwadoghị Ọgụ nleba anya nleba anya n'ime ime akpaaka akwụsịla nkwado
Akwụsịghị oti mkpu na akpaaka
Nleba anya anya
40
NT_ANEP_BOX_TX_EN_31-03-2023
NKWUO
ANEP na-etinye usoro mmepe na-aga n'ihu, yabụ, ANEP nwere ikike ime mgbanwe na nkwalite ngwaahịa ọ bụla akọwara n'ime akwụkwọ a, na-enweghị ọkwa. Enweghị ike ijide ANEP n'ọnọdụ ọ bụla maka mfu data ọ bụla, yana mmebi ọ bụla ma ọ bụ ihe merenụ, nke sitere na mmejuputa iwu na-adịghị mma ma ọ bụ akwadoghị iji ngwaahịa ahụ. Enyere ọdịnaya nke akwụkwọ a "dị ka ọ dị". Enweghị akwụkwọ ikike nke ụdị ọ bụla, ekwupụtara ma ọ bụ nke egosipụtara, emere maka izi ezi, ntụkwasị obi, ma ọ bụ ọdịnaya nke akwụkwọ ahụ. ANEP nwere ikike idegharị akwụkwọ a ma ọ bụ wepụ ya n'oge ọ bụla na-enweghị ọkwa.
A ghaghị ịmegharị ngwa eletriki na mmanye dịka ntuziaka n°2012/19/EU nke 04/07/12 si metụta ngwa eletriki na-ekpofu ihe na eletrọnịkị (WEEE)
AKWỤKWỌ KWESỊRỊ A na-ekwe nkwa ngwaahịa a maka afọ 3 site na ụbọchị ịkwụ ụgwọ ngwaahịa ahụ, ewezuga batrị na sel nke ekwenyere maka ọnwa 6. Agbanyeghị, nkwa a anaghị emetụta ma ọ bụrụ na: - Jiri nke anaghị agbaso ntuziaka dị n'akwụkwọ ntuziaka a. - Mbelata site na ihe kpatara mpụga ngwaahịa ahụ (omume mmebi, ọkụ, idei mmiri, oke mmiri, oke oketage…). – Nwụnye nke onye nrụnye erughi eru nke ANEP anabataghị. - Mgbanwe ma ọ bụ nrụzi nke ụlọ ọrụ ANEP akwadoghị. - Mepee ngwaahịa site n'aka onye na-abụghị ANEP kwadoro.
41
NT_ANEP_BOX_TX_EN_31-03-2023
4 bis rue de Paris 94470 Boissy-Saint-Léger Tél : +33 1 45 98 34 44 na-enye ọrụ AFTER ire ere. Websaịtị: www.anepstore.com
NT_ANEP_BOX_TX_EN_31-03-2023
Akwụkwọ / akụrụngwa
 |
ANEP BOX TX Multi-Elevator's Voice na Intercom Scalable System [pdf] Ntuziaka BOX TX Multi-Elevator s Voice And Intercom Scalable System, BOX TX Multi-Elevator s Voice And Intercom Scalable SystemVoice and Intercom Scalable System, Intercom Scalable System, Scalable System |
