Nkuzi Ọgbọ nke ụda C15
Ozi ngwaahịa
Nkọwapụta
- Ngwaahịa: C15 Synthesizer
- Onye nrụpụta: Labs na-adịghị adị
- Websaịtị: www.nonlinear-labs.de
- Email: info@nonlinear-labs.de
- Onye edemede: Matthias Fuchs
- Ụdị akwụkwọ: 1.9
Banyere nkuzi ndị a
Emebere nkuzi ndị a iji nyere ndị ọrụ aka ngwa ngwa na ngwa ngwa
ghọta ma jiri atụmatụ nke C15 synthesizer. Tupu
iji nkuzi ndị a, a na-atụ aro ka ị kpọtụrụ Quickstart
Nduzi ma ọ bụ akwụkwọ ntuziaka onye ọrụ ka ịmụta gbasara echiche na nhazi nke bụ isi
nke C15. Akwụkwọ ntuziaka onye ọrụ nwekwara ike ịnyekwu omimi
ozi na ike na parameters nke
ngwa.
Nkuzi nkuzi na-eji n'ihu panel nke ngwa.
Otú ọ dị, ọ bụrụ na ndị ọrụ na-ahọrọ ịrụ ọrụ na Interface User Graphic
(GUI), ha kwesịrị izo aka na Quickstart Guide ma ọ bụ isi 7 Onye ọrụ
Interfaces nke akwụkwọ ntuziaka onye ọrụ ịghọta isi echiche nke
nke GUI. E mesịa, ndị ọrụ nwere ike mfe itinye mmemme usoro
kọwara na nkuzi site na ngwaike panel gaa na GUI.
Ụdị
Nkuzi ndị a na-eji usoro nhazi kpọmkwem mee ntuziaka
doro anya ma dị mfe ịgbaso. A na-ahazi bọtịnụ igodo na koodu n'ime ya
nkwuwa okwu, a na-egosikwa ngalaba na brackets. Paragraf nke abụọ
nke enwere ike ịnweta site na ịpị bọtịnụ ugboro ugboro ka etinyere ya
italic nwere obi ike. A na-egosi ụkpụrụ data na brackets square.
A na-akpọ ndị njikwa dịka Ribbons na Pedal na Bold
Isi obodo.
A na-akụnye usoro mmemme n'aka nri wee kaa ya akara
akara triangle. Ihe ndetu na usoro mmemme gara aga na-aga n'ihu
etinyere ya ma kaa ya na njiri okpukpu abụọ. Akara ndetu ndị dị mkpa
jiri akara mkpu. Njem nlegharị anya na-enyekwu omimi
ihe ọmụma ma gosipụta ya n'ime ndepụta nke usoro mmemme.
Interface Onye ọrụ ngwaike
Ihe nrụpụta C15 na-egosipụta Panel Edit, Panel Nhọrọ,
na Ogwe njikwa. Biko rụtụ aka na onyonyo dị na ibe na-esote
maka ihe ngosi anya nke ogwe ndị a.
Ntuziaka ojiji ngwaahịa
Ụda Init
Ka ibido ụda na C15 synthesizer, soro ndị a
nzọụkwụ:
- Pịa bọtịnụ Init Sound dị n'ihu panel.
Ngalaba Oscillator / Ịmepụta Waveforms
Iji mepụta ebili mmiri site na iji ngalaba Oscillator nke C15
synthesizer, soro usoro ndị a:
- Pịa bọtịnụ ngalaba Oscillator dị n'ihu panel.
- Tụgharịa Encoder ka ịhọrọ ụdị ebili mmiri achọrọ.
FAQ
Ajụjụ: Ebee ka m nwere ike ịhụ ozi zuru ezu gbasara C15
synthesizer?
A: Maka ozi ndị ọzọ gbasara C15 synthesizer,
biko lelee ntuziaka onye ọrụ nke Labs na-adịghị adị na-enye. Ọ
nwere ozi zuru oke na echiche bụ isi, nhazi,
ike, na parameters nke ngwá ọrụ.
Ajụjụ: Enwere m ike iji Interface Onye ọrụ eserese (GUI) kama nke
ihu panel?
A: Ee, ị nwere ike iji Interface User Graphic (GUI) dị ka ihe
ọzọ na ihu panel. Biko rụtụ aka na Quickstart
Nduzi ma ọ bụ isi 7 Interface onye ọrụ nke ntuziaka onye ọrụ ka ịmụta
gbasara echiche ndị bụ isi nke GUI na otu esi ebufe mmemme
nzọụkwụ site na ngwaike panel gaa na GUI.
Nkuzi Ọgbọ nke ụda
GmbH Helmholtzstraße 2-9 E 10587 Berlin Germany
www.nonlinear-labs.de info@nonlinear-labs.de
Odee: Matthias Fuchs Ụdị akwụkwọ: 1.9
Ụbọchị: Septemba 21, 2023 © NONLINEAR LABS GmbH, 2023, Edebere ikike niile.
ọdịnaya
Banyere nkuzi ndị a. . . . . . . . . . . . . . . . . . . . 6 ụda olu. . . . . . . . . . . . . . . . . . . . . . 10 Ngalaba Oscillator / Ịmepụta Waveforms. . . . . . . . . . . . . 12
Ntọala Oscillator. . . . . . . . . . . . . . . . . . . 12 Oscillator onwe Modulation. . . . . . . . . . . . . . . . 13 Ewebata Shaper . . . . . . . . . . . . . . . . . 14 Ma Oscillators ọnụ . . . . . . . . . . . . . . . . 16 Ihe nzacha na-agbanwe agbanwe steeti. . . . . . . . . . . . . . . . . . 24 Ngwakọta ihe mmepụta . . . . . . . . . . . . . . . . . . . . 28 Ihe nzacha Comb. . . . . . . . . . . . . . . . . . . . . 30 Parameters ndị bụ isi. . . . . . . . . . . . . . . . 31 Oke dị elu karịa / Nnụcha ụda. . . . . . . . . 33 Na-agbanwe agbanwe ntọala exciter (Oscillator A) . . . . . . . . . . . 35 Iji ụzọ nzaghachi. . . . . . . . . . . . . . . . . . . 37
Okwu mmalite
Banyere nkuzi ndị a
Edere nkuzi ndị a iji mee ka ị chọta ụzọ gị na nzuzo nke C15 synthesizer gị ngwa ngwa na ngwa ngwa. Biko gaa na ntuziaka Quickstart ma ọ bụ akwụkwọ ntuziaka onye ọrụ ka ị mụta ihe niile gbasara echiche bụ isi na nhazi nke C15 gị tupu i jiri nkuzi ndị a. Biko lelee akwụkwọ ntuziaka onye ọrụ oge ọ bụla ka inyocha miri emi n'ime ike nke injin C15, yana mụta nkọwa niile nke paramita ngwa ọ bụla.
Nkuzi ga-akụziri gị akụkụ ndị bụ isi nke echiche C15 yana akụkụ dị iche iche nke igwe ụda, yana otu ha na-esi emekọrịta ihe, n'ụzọ aka. Ọ bụ ụzọ dị mfe iji mara onwe gị na C15 gị, yana mmalite maka ọrụ imewe ụda gị na ngwá ọrụ ọ bụkwa. 6 Ọ bụrụ na ọ na-amasị gị ịmụtakwu gbasara nkọwapụta nke otu paramita (dịka ọnụọgụ uru, scaling, ike mgbanwe wdg), biko rụtụ aka na isi 8.4. "Ntụaka Parameter" nke akwụkwọ ntuziaka onye ọrụ n'oge ọ bụla. Ị nwere ike iji nkuzi na akwụkwọ ntuziaka onye ọrụ n'otu aka ahụ.
Nkuzi na-eji n'ihu panel nke ngwá. Ọ bụrụ na ọ ga-amasị gị ịrụ ọrụ na Interface Onye ọrụ eserese, biko rụtụ aka na Quickstart Guide ma ọ bụ isi 7 “Mmadụ Onye ọrụ” nke akwụkwọ ntuziaka onye ọrụ ka ị buru ụzọ mụọ gbasara echiche ndị bụ isi nke GUI. Mgbe nke a gasịrị, ị ga-enwe ike itinye usoro mmemme akọwara ngwa ngwa wee bufee ha site na ogwe ngwaike gaa na GUI.
Ụdị
Nkuzi ndị a na-akọwa mmemme dị mfe examples ị nwere ike soro nzọụkwụ site nzọụkwụ. Ị ga-ahụ ndepụta na-anya isi usoro mmemme yana ọnụ ọgụgụ ndị na-egosi ọnọdụ interface onye ọrụ C15. Iji mee ka ihe doo anya nke ọma, anyị na-eji usoro nhazi akọwapụtara n'oge nkuzi niile.
A na-ahazi bọtịnụ (Ngalaba) nke a chọrọ ịpị na mbipụta gbara okpotokpo. Aha nke ngalaba na-esote na (brackets). A na-akpọ koodu ahụ otu ụzọ:
Nkwado (Envelopu A) … Encoder…
Akara akara nke abụọ enwere ike ịnweta site na ịpị bọtịnụ ugboro ugboro na italic: Asym
Okwu mmalite
Ụkpụrụ data nwere nkwuwa okwu yana na braket square: [60.0%] Ndị njikwa, dị ka Ribbons na Pedals, ka akpọnyere aha n'isi isi ike: PEDAL 1
A na-akụnye usoro mmemme a ga-eme n'aka nri wee jiri triangle akara, dịka nke a:
Ihe ndetu na usoro mmemme gara aga na-agbakwunyere karịa n'aka nri wee jiri slash slash akara: //
Nke a ga-adị ka nke a:
Itinye modulation na PM self modulation nke Oscillator A:
Pịa PM A (Oscillator B) ugboro abụọ. E gosipụtara Env A na ngosipụta.
Tụgharịa encoder ka ọ bụrụ [30.0%].
7
A na-emezigharị Oscillator B ugbu a site na mgbama nke Oscillator A.
A na-achịkwa omimi modulation site na envelopu A na uru nke 30.0%.
N'otu oge n'otu oge, ị ga-ahụ ụfọdụ ndetu dị mkpa (ma ọ dịkarịa ala anyị kwenyere na…) A na-eji akara mkpu (nke dị ka nke a:)
Biko mara na enwere…
Mgbe ụfọdụ, ị ga-ahụ nkọwa ụfọdụ n'ime ndepụta nke usoro mmemme. Ha na-enye ntakịrị ihe ọmụma dị omimi ma na-akpọ ha "Njem njem". Ha dị ka nke a:
Njem nlegharị anya: Mkpebi Uru Uru Ụfọdụ paramita chọrọ…
N'ebe a, ị ga-ahụ mkpirisi mkpirisi mkpirisi ha dị ka nke a:
5 Mkpokọta: Ngalaba Oscillator
Mgbakọ ndị bụ isi
Tupu ịmalite, ọ dị oké mkpa ịghọta ụfọdụ mgbakọ dị mkpa nke ihu panel karịa na nke a na Quickstart Guide:
· Mgbe ịpịrị bọtịnụ dị na Panel Nhọrọ, a na-ahọrọ paramita ma nwee ike dezie uru ya. Ikanam ya ga-enwu ruo mgbe ebighị ebi. Enwere ike ịnweta "Sub Parameters" ọzọ site na ịpị bọtịnụ ọtụtụ oge.
Enwere ike inwe ụfọdụ ọkụ ọkụ na-egbuke egbuke iji gosi ebumnuche nke mgbaàmà a na-eme na Parameter Group ahọpụtara.
Mgbe ahọpụtara njikwa Macro, LEDs na-egbuke egbuke na-ewepụ paramita ọ na-agbanwe.
Mgbe ihuenyo atọrọ agbanyere, mgbama na-arụ ọrụ ugbu a ma ọ bụ paramita na-arụ ọrụ
8
N'otu n'otu na-egosi site LEDs ọkụ na-adịgide adịgide.
Okwu mmalite
Interface Onye ọrụ ngwaike
Foto ndị dị na ibe na-esote na-egosi Panel Edit na otu n'ime Nhọrọ Nhọrọ nke Ụlọ Ọrụ Panel, na Ogwe njikwa nke ngalaba ntọala.
Melite
Ụda
Ozi
Ọ dị mma
Shi
Ọdabara
Dec
Inc
Ntọala
Ụlọ ahịa
Banye
Dezie
Megharịa
Megharịa
Panel dezie
Bọtịnụ ntọala 1 Ngosipụta nkeji 2 ntọala 3 bọtịnụ ụda 4 bọtịnụ dị nro 5 ruo 1 4 bọtịnụ ụlọ ahịa 6 bọtịnụ ozi 7 bọtịnụ dị mma 8 Encoder 9 Tinye bọtịnụ 10 bọtịnụ dezie 11 bọtịnụ Mgbanwe 12 bọtịnụ ndabara 13 Dec / Inc. Megharịa bọtịnụ
Ngwakọta nzaghachi
A/B x
Ngwakọta
Ihe nzacha SV
Mmetụta
Ihe nzacha ọkụ
Ụgbọala
A B
Mgbapụta
Ire ure
AP Tune
Ihe nzacha agbanwe agbanwe steeti
Ndewo Cut
A B
Ngwakọta ngwakọta
Bepụ
Reson
Ngwakọta mmepụta
Kesaa
A
B
Ngwakọta
Ihe nzacha SV
Ụgbọala
Ọkwa PM
Ọkwa FM
Ogwe nhọrọ
16 Parameter Group 17 Parameter egosi 18 Nhọrọ oke
Bọtịnụ 19 Ngosipụta maka
Sub Parameters
+
Ọrụ
Ụdị
Ogwe njikwa ngalaba ntọala
20 / + Bọtịnụ 21 Ngosipụta nkeji ntọala 22 Ọrụ / Bọtịnụ ọnọdụ
Ọgbọ ụda
Nkuzi mbụ na-akọwa ọrụ ndị bụ isi nke modul ọgbọ ụda, mmekọrịta ha (ike mgbanwe mgbanwe), na ụzọ mgbaàmà. Ị ga-amụta ka esi mepụta ụdị ebili mmiri dị iche iche site na iji oscillators, gwakọta ha, wee zụọ ha n'ime modul na-esote dị ka nzacha na mmetụta. Anyị ga na-emeso ihe nzacha dị ka ngwaọrụ na-arụ ọrụ ụda yana ike na-emepụta ụda nke Comb Filter. A ga-ekpuchi nkuzi a site na nghọta na ikike nzaghachi (nke bụ ụzọ ọzọ na-adọrọ mmasị nke ịmepụta ụda).
Dị ka ị maralarị, oscillators C15 na-ebupụta ebili mmiri. Ezigbo ihe ụtọ na-amalite mgbe ebili mmiri ndị a na-agbagọ iji mepụta ụdị ebili mmiri dị mgbagwoju anya nwere nsonaazụ ụda dị ịtụnanya. Anyị ga-amalite ebe ahụ:
Ụda Init
10
Malite na ụda Init bụ ihe kacha mma ịme. Mgbe ị na-ebunye ụda Init, a na-edobe paramita na ụkpụrụ ndabara ha (otu ihe na-eme mgbe ị na-eji bọtịnụ ndabara). Ụda Init na-eji ụzọ mgbama kachasị nke na-enweghị mgbanwe ọ bụla. Ọtụtụ n'ime ngwakọta agwakọta ka atọrọ na uru efu.
Na-ebido paramita niile (resp. ihe nchekwa ndezi):
Pịa ụda (Panel dezie). Pịa ma jide Ndi an-kpọ (Panel dezie). Ugbu a ị nwere ike họrọ ma ịchọrọ ibido ihe nchekwa ndezi ka a
Otu, oyi akwa ma ọ bụ mgbawa ụda (Ogwe Dezie> Bọtịnụ dị nro 1-3). Ugbu a ebidola ihe nchekwa ndezi. Ị gaghị anụ ihe ọ bụla. Emela
ichegbu onwe gị, ọ bụghị gị ka a ga-ata ụta. Biko gaa n'ihu: Pịa A (Mpụta Ngwakọta). Tụgharịa Encoder ka ọ bụrụ ihe ruru. [60.0%]. Kpọọ ndetu.
Ị ga-anụ ụda Init a na-ahụkarị ka ọ dị mfe, na-eji nwayọọ nwayọọ na-emebi oneoscillator sine-wave ụda.
Njem nlegharị anya dị mkpirikpi n'okporo ụzọ mgbaama Tupu anyị aga n'ihu, ka anyị leba anya nkenke na nhazi/ụzọ mgbama C15:
Ọgbọ ụda
Ngwakọta nzaghachi
Shaper
Oscillator A
Shaper A
Oscillator B
Shaper B
Ngwakọta FB RM
Ngwakọta FB
Ihe nzacha ọkụ
Ngbanwe steeti
Iyo
Ngwakọta mmepụta (Stereo) Shaper
Envelopu A
Envelopu B
Flanger Cabinet
Nzacha oghere
Echo
Ntughari
11
Maka FX /
FX
Oghere Usoro FX
Ngwakọta
Envelopu C
Flanger Cabinet
Nzacha oghere
Echo
Ntughari
Ebe mmalite bụ oscillators abụọ. Ha na-emepụta ebili mmiri sine maka mmalite mana ebili mmiri ndị a nwere ike ịgbagha n'ụzọ dị iche iche iji mepụta ụdị ebili mmiri dị mgbagwoju anya. A na-eme nke a site na nhazi usoro (PM) yana site na iji ngalaba Shaper. Enwere ike ịmegharị oscillator ọ bụla site na isi mmalite atọ: onwe ya, oscillator nke ọzọ na mgbama nzaghachi. Enwere ike iji isi mmalite atọ ahụ n'otu oge n'ụzọ dị iche iche. Envelopu atọ na-achịkwa ma Oscillators na Shapers (Env A Osc/Shaper A, Env B Osc/Shaper B, ebe Env C nwere ike imegharị ya nke ọma, dịka maka ịchịkwa nzacha). Iji hazie akara ngosi oscillator ọbụna n'ihu, enwere ihe nzacha nke steeti yana ihe nzacha Comb. Mgbe ị na-arụ ọrụ na ntọala resonance dị elu yana mgbama oscillator na-agbanye ya, nzacha abụọ ahụ nwere ike ịrụ ọrụ dị ka ndị na-emepụta mgbama n'onwe ha. A na-ebunye ihe nrụpụta Oscillator/Shaper na ihe nzacha n'ime igwe ihe nrụpụta. Nkebi a na-enye gị ohere ịgwakọta ma dozie ihe dị iche iche sonic na ibe ha. Iji zere mgbagha na-achọghị na mmepụta stage, legide anya na oke Ọkwa Ngwakọta Mmepụta. Uru gburugburu 4.5 ma ọ bụ 5 dB na-abụkarị n'akụkụ nchekwa. Ọ bụrụ na ịchọrọ iji mgbagha kpachaara anya mepụta ọdịiche timbral, biko tụlee iji paramita mbanye nke Ngwakọta mmepụta ma ọ bụ mmetụta Cabinet kama. Nke ikpeazụ stage nke ụzọ mgbama bụ ngalaba mmetụta. A na-enye ya nri site na Ngwakọta Mmepụta ebe a na-ejikọta olu niile na mgbama monophonic. Mgbe ị na-eji ụda Init, mmetụta ise niile ga-agafe.
Ngalaba Oscillator / Ịmepụta Waveforms
Ihuenyo paramita nke ihe ngosi Panel Unit dị ka nke a:
Ọgbọ ụda
1 Otu nkụnye eji isi mee 2 Parameter aha
12
Oscillator Basics
3 Ihe ngosi eserese 4 Uru oke
5 Mpempe bọtịnụ dị nro 6 nke isi na nke dị n'okpuru
Ka anyị dozie Oscillator A:
Pịa Pitch (Oscillator A) AB (Comb Filter) AB (State Variable Filter) na A (mmepụta igwekota) bụ
na-egbuke egbuke iji gosi gị na ma nzacha na ihe mmepụta ihe na-enweta mgbaama sitere na Oscillator A ahọpụtara (n'agbanyeghị na ị naghị anụ ọtụtụ nzacha ugbu a). Tụgharịa Encoder wee detuo Oscillator A site na semitones. A na-egosipụta ọkwa ahụ na nọmba MIDI-note: "60" bụ MIDI note 60 na
nhata na ndetu "C3". Ọ bụ pitch ị na-anụ mgbe ị na-akpọ "C" nke atọ nke ahụigodo.
Ugbu a, ka anyị jiri Key Tracking gwuo egwu:
Pịa Pitch (Oscillator A) ugboro abụọ. Ìhè ya na-adịgide. Ugbu a lelee ihe ngosi. Ọ na-egosi oke agbapụtara agbapụta igodo Trk. Rịba ama na ọtụtụ ịpị bọtịnụ paramita na-atụgharị n'etiti oke "isi" elu (ebe a "Pitch") na ọtụtụ "sub" paramita (ebe a Env C na Key Trk) ndị metụtara isi oke.
Tụgharịa encoder ka [50.00%]. Oscillator A's kiiboodu ebelatala ọkara nke ha nhata ịkpọ nkeji nkeji na ahụigodo.
Ọgbọ ụda
Tụgharịa koodu ahụ ka ọ bụrụ [0.00%]. Igodo ọ bụla na-egwu n'otu pitch ugbu a. Igodo nsochi dị nso na 0.00% nwere ike ịba uru mgbe ejiri oscillator mee ihe dị ka isi mmalite mgbanwe LFO ma ọ bụ onye na-ebu PM ngwa ngwa. More na nke a emechaa…
Tụgharịa Encoder azụ ka ọ bụrụ [100.00 %] (nkọwa nke ọkara ụda na-emebu). Tọgharịa paramita ọ bụla ka ọ bụrụ uru ndabara ya site na ịpị aka aka (Panel dezie).
Ka anyị webata ụfọdụ parampat envelopu:
(biko gaa na ntuziaka onye ọrụ maka nkọwa niile nke parampat envelopu ma ọ bụ jiri bọtịnụ Ama na Panel Dezie).
Pịa Mmegide (Envelopu A).
Tụgharịa Encoder ma kpọọ ụfọdụ ndetu.
Mwepụta mgbasa ozi (Envelopu A).
13
Tụgharịa Encoder ma kpọọ ụfọdụ ndetu.
A na-ejikọta envelopu A mgbe niile na Oscillator A ma na-ejikwa olu ya.
Pịa Sustain (Envelopu A).
Tụgharịa Encoder ka ọ bụrụ ihe ruru. [60,0%].
Oscillator A na-enye ọkwa mgbama static ugbu a.
Oscillator onwe Modulation
Pịa PM Self (Oscillator A). Tụgharịa Encoder azụ na azụ.
Oscillator A na-eweghachite mmepụta ya na ntinye ya. N'ọnụego dị elu, ebili mmiri mmepụta na-agbagọ nke ukwuu ma na-ebute ebili mmiri sawtooth nwere ọdịnaya kwekọrọ. Ikpochapụ koodu ahụ ga-emepụta mmetụta nzacha.
Ụkpụrụ ihe nlegharị anya bipolar
PM Self na-arụ ọrụ nke ọma yana ụkpụrụ oke oke adịghị mma. Ị ga-ahụ ọtụtụ paramita ndị ọzọ nwere ụkpụrụ dị mma na nke na-adịghị mma, ọ bụghị nanị ntọala omimi mgbanwe (dị ka ị nwere ike ịma site na ndị ọzọ synthesizers) kamakwa ịgwakọta ọkwa wdg. N'ọtụtụ ọnọdụ, uru na-adịghị mma na-anọchi anya mgbaàmà na-agbanwe agbanwe. Naanị mgbe ị na-agwakọta mgbama dị otú ahụ na mgbaama ndị ọzọ, nkwụsị nke oge ga-emepụta mmetụta a na-anụ. Na Self PM na-arụ ọrụ, uru dị mma ga-emepụta sawtooth-efegharị na-ebili elu, ụkpụrụ ọjọọ na-emepụta ihu na-ada.
Ka anyị mee Oscillator onwe modulation ike na-achịkwa onwe-PM nke Oscillator A site envelopu A:
Tọọ koodu ahụ ka ọ bụrụ ihe ruru. [70,0%] ego mgbanwe onwe. Pịa PM Self (Oscillator A) ọzọ. Lelee Ngosipụta: E gosipụtara Env A
Ị nwetala akara nke mbụ "n'azụ" PM-Self ("Env A"). Ọ bụ ego nke envelopu A na-emegharị PM-Self nke Oscillator A.
Ọgbọ ụda
N'aka nke ọzọ, ị nwere ike ịtụgharị site na sub-parameter n'azụ
bọtịnụ na-arụ ọrụ ugbu a yana bọtịnụ rọrọ nke kacha nri n'oge ọ bụla.
Tụgharịa encoder ka ọ bụrụ [100,0%].
14
Envelopu A na-enye omimi mgbanwe mgbanwe ike maka PM Self of Osc
A. N'ihi ya, ị ga-anụ mgbanwe site na-egbuke egbuke ruo nro ma ọ bụ nke ọzọ
gburugburu, dabere na ntọala nke Env A.
Ugbu a tweak dị iche iche envelopu A ntakịrị (lee n'elu): Dabere-
N'ime ntọala, ị ga-anụ ụfọdụ ụda brass ma ọ bụ mkpasu iwe.
Ebe ọ bụ na ọsọ ahụigodo na-emetụta envelopu A, ụda ga-adịkwa
dabere na ike ị na-akụ igodo.
Na-ewebata Shaper
Nke mbụ, biko tọgharịa Oscillator A ka ọ bụrụ nke dị mfe site na ịhọrọ PM Self na PM Self - Env A (Env A) wee pịa Default. Envelopu A kwesịrị ịdị na-enye ntọala akụkụ ahụ dị mfe.
Pịa Mix (Shaper A). Tụgharịa Encoder nwayo ka ọ bụrụ [100.0] wee kpọọ ụfọdụ ndetu.
N'ịbawanye ụkpụrụ ngwakọta, ị ga-anụ ụda na-egbuke egbuke. Rịba ama na ụda dịtụ iche na nsonaazụ nke "PM Self". Ugbu a Oscillator A na-emegharị akara ngosi site na Shaper A. "Mix" ngwakọta n'etiti akara ngosi oscillator dị ọcha (0%) na mmepụta nke Shaper (100%).
Pịa Drive (Shaper A). Tụgharịa Encoder nwayọọ nwayọọ ma kpọọ ụfọdụ ndetu.
Ọgbọ ụda
Mgbe ahụ tọọ mbanye ahụ ka [20.0 dB]. Pịa Fold (Shaper A). Tụgharịa Encoder nwayọọ nwayọọ ma kpọọ ụfọdụ ndetu. Pịa Asym (Shaper A). Tụgharịa Encoder nwayọọ nwayọọ ma kpọọ ụfọdụ ndetu.
Fold, Drive na Asym(metry) na-agbagha mgbama ahụ iji mepụta ụdị ebili mmiri dị iche iche nwere ọdịnaya kwekọrọ na nsonaazụ timbral dị iche iche.
Pịa PM Self (Oscillator A) ọzọ. Tụgharịa Encoder ka [50.0 %] wee kpọọ ụfọdụ ndetu. Pịa PM Self (Oscillator A) ọzọ. Tụgharịa Encoder nwayọọ nwayọọ ma kpọọ ụfọdụ ndetu.
Ugbu a, ị dị nnọọ nri Shaper na onwe modulated (resp. sawtooth ife) mgbaama kama a sine ife.
15 Njegharị gịnị ka Shaper na-eme?
N'okwu dị mfe, Shaper na-agbagọ mgbama oscillator n'ụzọ dị iche iche. Ọ na-esetịpụ mgbama ntinye gaa na akụkụ a na-akpụzi iji mepụta ụdị ebili mmiri dị mgbagwoju anya karị. Dabere na ntọala ndị a, enwere ike ịmepụta nnukwu ihe nlegharị anya dị iche iche.
yx
Mpụta t
Ntinye
t
Ụgbọ ala:
3.0dB, 6.0dB, 8.0dB
Mpịakọta:
100%
Asymetry: 0%
Oke draịva na-achịkwa ike nke mgbagwoju anya nke Shaper na-ebute ma nwee ike mepụta mmetụta nzacha na-enweghị isi. Paramita Fold na-achịkwa ọnụọgụ nke ripples na ụdị ifegharị. Ọ na-emesi ike ụfọdụ harmonics na-adịghị mma ebe a na-ebelata isi ihe. Ụda ahụ na-enweta ụfọdụ àgwà "imi", n'adịghị ka nzacha na-atụgharị. Asymmetry na-emeso akụkụ elu na ala nke mgbama ntinye n'ụzọ dị iche iche ma na-ebute ọbụna harmonics (2nd, 4th, 6th etc) otú ahụ. N'ọbara dị elu, a na-atụba mgbaama ahụ otu octave dị elu ebe a na-ewepụ ihe ndị bụ isi. Paragraf atọ ahụ niile na-emekọrịta ihe na ibe ha, na-emepụta ọtụtụ mgbanwe dị iche iche nke akụkụ mgbagha na ụdị ebili mmiri na-ebute.
Ọgbọ ụda
Gaa njem nlegharị anya C15 ntụgharị / ngwakọta
Dị ka ọ dị na ụzọ mgbaàmà niile dị na C15, Shaper adịghị agbanye ma ọ bụ pụọ na mgbama ma na-ejikọta ya na mgbaàmà ọzọ (na-emekarị nkụ). Nke a bụ ihe ezi uche dị na ya ebe ọ na-enye ike morphing dị ukwuu na-enweghị usoro ọ bụla ma ọ bụ pịa na ụda. More na nke a emechaa.
Oke njem nlegharị anya bara ezigbo mkpebi
Ụfọdụ parampat chọrọ mkpebi dị mma nke ukwuu iji dozie ụda dị ka gị
ọchịchọ. Iji mee nke a, enwere ike ịgbasa mkpebi nke paramita ọ bụla site na a
ihe nke 10 (mgbe ụfọdụ ọbụna 100). Naanị pịa bọtịnụ dị mma ka ị gbanwee ezigbo mkpebi -
tion on na gbanyụọ. Iji nweta mmetụta nke mmetụta ahụ, nwalee “Drive (Shaper A)” nke ọma
ụdị mkpebi.
Site na ịhọrọ oke ọhụrụ, ezigbo “mode” ga-enwe nkwarụ na-akpaghị aka. Iji
16
mee mkpebi dị mma na-adịgide adịgide, pịa Shift + Fine.
Ugbu a tọọ PM Self ka ọ bụrụ [75%]. Pịa PM Self (Oscillator A) ugboro abụọ ọzọ (ma ọ bụ jiri nke kachasị nro
bọtịnụ) iji nweta sub-parameter Shaper. A na-eme ka ọ pụta ìhè na ngosi. Tụgharịa Encoder nwayọọ nwayọọ ma kpọọ ụfọdụ ndetu.
Ugbu a akara ngosi nke usoro mgbanwe nke Oscillator A na-enye azụ azụ Shaper: Kama nke sine-efegharị, a na-eji usoro ebili mmiri dị mgbagwoju anya ugbu a dị ka modulator. Nke a na-ebute oke ụda karịa na, gafere ogo ụfọdụ, ọ nwere ike iwepụta nsonaazụ ọgba aghara na-arịwanye elu, mkpọtụ ma ọ bụ ụda "chirpy" karịsịa. Ị ga-anụ mmetụta nke shaper ọbụna mgbe ị na-edozi paramita Mix nke shaper ka ọ bụrụ efu.
Abụọ Oscillators ọnụ
Na-agwakọta Oscillators abụọ:
Nke mbụ, biko bugharịa ụda Init. Abụọ Oscillators na-ekepụta ebili mmiri dị mfe ọzọ.
Pịa A (Mpụta Ngwakọta). Tụgharịa Encoder ka ọ bụrụ ihe ruru. [60.0%]. Pịa B (ngwakọta mmepụta).
Tụgharịa Encoder ka ọ bụrụ ihe ruru. [60.0%]. Ugbu a, ma oscillators abụọ na-ezipụ akara ha site na Ngwakọta mmepụta.
Pịa Ọkwa (Mpụta Ngwakọta). Tụgharịa Encoder ka ọ bụrụ ihe ruru. [-10.0 dB].
Ị ka belatara mgbaama mmepụta igwekota nke ọma iji zere mgbagha achọghị.
Pịa Sustain (Envelopu A). Tụgharịa encoder ka ọ bụrụ [50%].
Oscillator A na-enye ugbu a sine-efegharị na ọkwa mgbe niile ebe Oscillator B ka na-apụ n'anya ka oge na-aga.
Ọgbọ ụda
Ịmepụta oge:
Pịa Pitch (Oscillator B).
Tụgharịa encoder ka [67.00 st]. Kpọọ ndetu.
17
Ugbu a Oscillator B na-ege ntị semitones asaa (otu nke ise) n'elu Oscillator A. You
nwekwara ike nwalee oge dị iche iche dịka ọmụmaatụ octave ("72") ma ọ bụ octave
gbakwunyere mgbakwunye nke ise (“79”).
Tụgharịa Encoder azụ na [60.00 st] ma ọ bụ jiri bọtịnụ Ndi an-kpọ.
Pịa PM Self (Oscillator B).
Tụgharịa Encoder ka ọ bụrụ ihe ruru. [60.0%]. Kpọọ ndetu.
Oscillator B na-emegharị onwe ya ugbu a, na-ada ụda karịa Oscillator A.
Pịa Decay 2 (Envelopu B).
Tụgharịa Encoder ka ọ bụrụ ihe ruru. [300 ms].
Oscillator B na-apụ n'anya ugbu a n'ogo ire ere. Ihe si na ya pụta
ụda na-apụtachaghị ìhè na-echetara ụdị piano.
Pịa Sustain (Envelopu B).
Tụgharịa encoder ka ọ bụrụ [50%].
Ugbu a, ma Oscillators na-emepụta ụda kwụ ọtọ. Ụda dapụtara bụ
na-echetaghị akụkụ ahụ.
Ị ka kere ụfọdụ ụda na-mere nke abụọ components: A isi sine-efegharị efegharị si Oscillator A na ụfọdụ kwadoro / decaying overtones si Oscillator B. Dị mfe ka, ma na nza nke okike nhọrọ ịhọrọ site na ...
Ọgbọ ụda
Nchọpụta Oscillator B:
Pịa PM Self (Oscillator A). Tụgharịa encoder ka ọ bụrụ [60.00%].
Naanị anyị chọrọ ime ka ụda ahụ dum dịkwuo ọkụ, iji meziwanye ụda nke ndị mbụ aample.
Pịa Pitch (Oscillator B). Pịa Ọma (Panel dezie). Jiri nwayọọ gbagoo na ala wee zaa ihe ngbanwe ahụ wee pịa [60.07 st].
Oscillator B ejirila 7 cents mee ihe ugbu a n'elu Oscillator A. Detuning na-emepụta ugboro ugboro nke anyị niile hụrụ n'anya nke ukwuu n'ihi na ọ na-eme ka ụda ahụ bụrụ "abụba" na "dị egwu".
Na-emegharị ụda ahụ ntakịrị:
18 Mwakpo Pịa (envelopu A na B). Tụgharịa encoder. Mwepụta mgbasa ozi (envelopu A na B). Tụgharịa encoder. Gbanwee ọkwa onwe nke PM na parampat envelopu dị ka ịchọrọ. Dabere na ntọala, nsonaazụ ga-adịgasị iche n'etiti eriri na ụda ọla.
Otu ugboro iti n'usoro ọ bụla nwere igodo nsochi
Dịka ị chọpụtala, ugboro iti na-agbanwe n'ofe ahụigodo. N'elu ahụigodo, mmetụta ahụ nwere ike itolite nke ukwuu wee daa ntakịrị "ihe na-ekwekọghị n'okike". Iji nweta akara aka na-aga n'ihu na ọkwa ọkwa niile:
Pịa Pitch (Oscillator B) ugboro atọ. A na-eme ka igodo Trk pụta ìhè na ngosi. Pịa Ọma (Panel dezie). Tụgharịa Encoder nwayo ka ọ bụrụ [99.80%].
N'ime igodo nsochi n'okpuru 100%, ọkwa nke ndetu dị elu ga-abawanye nke ukwuu. adabereghị na ọnọdụ ha na ahụigodo. Nke a na-eme ka ndetu dị elu dị ntakịrị ihe na-erughị obere ndetu ma na-eme ka iti ụda dị ala n'ogo dị elu, resp. kwụ ọtọ n'ofe ọkwa dị obosara.
Ọgbọ ụda
Otu oscillator na-emegharị nke ọzọ:
Nke mbụ, biko bugharịa Init-Sound. Echefula ịgbanye ọkwa A na
Ngwakọta mmepụta ihe ruo [60.0%]. Abụọ Oscillators na-emepụta sine dị mfe.
ebili mmiri. Ihe ị na-anụ ugbu a bụ Oscillator A.
Pịa PM B (Oscillator A).
Tụgharịa Encoder wee pịa ihe ruru. [75.00%].
A naghị atụkwasị Oscillator B na igwekota mmepụta kama a na-eji ya gbanwee
Oge nke Oscillator A kama. Ebe ọ bụ na Oscillator B na-emepụta ugbu a
sine-wave n'otu ọkwa ahụ dị ka Oscillator A, mmetụta a na-anụ yiri ya
onwe modulation nke Oscillator A. Ma ebe a na-abịa na fun akụkụ, anyị bụ ugbu a
Mgbanwe nke Oscillator B:
Pịa Pitch (Oscillator B).
Hichapụ ihe ngbanwe ahụ wee kpọọ ụfọdụ ndetu. Wee pịa [53.00 st].
Ugbu a, ị ga na-anụ ụfọdụ timbre “ọla” dị nro na-ada nke ọma
19
na-ekwe nkwa (mana nke ahụ bụ naanị anyị, n'ezie…).
Njem Nlegharị anya Ihe nzuzo nke Modulation Phase (PM) Oscillator Pitches and Modulation Index
Mgbe ị na-emegharị akụkụ nke otu oscillator site na nke ọzọ n'otu oge dị iche, a na-emepụta ọtụtụ akụkụ akụkụ ma ọ bụ ụda ọhụrụ n'otu n'otu. Ndị ahụ anọghị na mgbama isi mmalite. Oke ugboro nke ma oscillator mgbama na-akọwapụta nkwekọ ọdịnaya resp. nhazi ụda olu nke mgbaàmà na-apụta. Ụda a na-esi na ya pụta na-anọgide na-adakọ ọnụ ma ọ bụrụhaala na oke dị n'etiti oscillator modulated (a na-akpọ "bu" ebe a Oscillator A) na modulating oscillator (a na-akpọ "modulator" ebe a Oscillator B) bụ ọnụọgụ kwesịrị ekwesị (1: 1, 1: 2, 1). :3 wdg). Ọ bụrụ na ọ bụghị, ụda ga-esi na ya pụta ga-adịwanye njọ na enweghị mmasị. Dabere na ọnụọgụ ugboro ugboro, agwa sonic na-echetara "osisi", "igwe" ma ọ bụ "iko". Nke a bụ n'ihi na ugboro ole dị na mpempe osisi, igwe ma ọ bụ ugegbe na-ama jijiji yiri nke ugboro ugboro nke PM na-emepụta. N'ụzọ doro anya, PM bụ ngwá ọrụ dị mma nke na-emepụta ụda na-egosipụta ụdị àgwà timbral a. Oke nke abụọ dị oke mkpa bụ ike nke usoro modulation ma ọ bụ “ntụgharị mgbanwe mgbanwe”. Na C15, a na-akpọ paramita kwesịrị ekwesị "PM A" na "PM B". Ụkpụrụ dị iche iche ga-arụpụta nsonaazụ timbral dị iche iche. Mmekọrịta dị n'etiti pitch nke ndị oscillators dị iche iche na ntọala omimi mgbanwe ha ("PM A / B") dịkwa oke mkpa na nsonaazụ sonic.
Ijikwa envelopu jikwaa modulator:
Dịka ị mụtala ugbu a, ugboro na mod omimi nke modulator (ebe a Oscillator B) dị oke mkpa maka ịkpụzi ụda site na iji PM. N'adịghị ka kpochapụwo subtractive njikọ, ọ dị nnọọ mfe n'ịwa a dịgasị iche iche nke mkpọtụ na "ọla" timbres na-enye ọtụtụ ikike mgbe iṅomi ngwa egwu, dị ka mallets ma ọ bụ dọpụta urụk. Iji nyochaa nke a, anyị ga-agbakwunye ụdị "stroke" na-ada ụda na ụda dị mfe:
Ọgbọ ụda
Wụnye ụda Init wee tụgharịa Oscillator A (onye na-ebu ya):
A (ngwakọta mmepụta) = [75.0%]
Pịa Pitch (Oscillator B).
Tọọ koodu ahụ ka ọ bụrụ [96.00 st].
20
Pịa PM B (Oscillator A).
Tọọ koodu ahụ ka ọ bụrụ ihe ruru [60.00%].
Ugbu a ị na-anụ Oscillator A ka Oscillator B na-emezigharị usoro ya.
Ụda na-egbuke egbuke ma jiri nwayọọ nwayọọ na-ere ure.
Pịa Pitch (Oscillator B) ruo mgbe emepụtara Key Trk na ngosi.
Tụgharịa encoder wee pịa [0.00%].
Igodo nsochi nke Oscillator B agbanyụrụ ugbu a, na-enye modula na-aga n'ihu.
tor-pitch maka igodo niile. N'akụkụ ụfọdụ isi, ụda na-aghọzi
dịtụ iche.
Pịa PM B (Oscillator A) ruo mgbe egosipụtara Env B na ngosipụta.
Tọọ koodu ahụ ka ọ bụrụ [100.0%].
Ugbu a envelopu B na-achịkwa omimi nke nhazi usoro (PM B).
oge.
Pịa Decay 1 (Envelopu B).
Tụgharịa encoder ka [10.0 ms].
Pịa Decay 2 (Envelopu B).
Tụgharịa Encoder ka ọ bụrụ ihe ruru. [40.0 ms] ma kpọọ ụfọdụ ndetu. Debe ezumike -
ebe (Ọkwa BP) na uru ndabara 50%.
Envelopu B na-ewepụta “stroke” dị mkpụmkpụ nke na-agba ọsọ ngwa ngwa
na-apụ apụ. N'ime igodo ọ bụla, "stroke" na-ada ụda na-ada ntakịrị
dị iche iche ebe ọ bụ na pitch ratio n'etiti ụgbọelu na modulator bụ a bit
dị iche iche maka ọ bụla igodo. Nke a na-enyere aka ịme emulation nke ụda eke
mara ezigbo mma.
Iji igodo nsochi dị ka oke ụda:
Pịa Pitch (Oscillator B) ruo mgbe emepụtara Key Trk na ngosi. Tụgharịa Encoder wee pịa [50.00%] ka ị na-egwu ụfọdụ ndetu.
Enyerela igodo nsochi nke Oscillator B ọzọ nke na-amanye Oscillator B ịgbanwe ọkwa ya dabere na ndetu akpọre. Dị ka ị na-echeta, a na-agbanwe oke ọkwa dị n'etiti oscillators, yabụ na usoro nkwekọ nke ụda ga-apụta ga-agbanwekwa n'ofe ndetu niile. Nwee obi ụtọ ịnwale ụfọdụ nsonaazụ timbral.
Ọgbọ ụda
Iji Modulator Pitch ịgbanwe agwa sonic:
Ugbu a gbanwee Pitch (Oscillator B).
Ị ga-ahụ mgbanwe timbral site na "osisi" (ọkara ọkwa
21
ranges) site na "ọla" ruo "glassy" (oke ọkwa dị elu).
Tinyegharịa Decay 2 (Envelopu B) ntakịrị ma ị ga-anụ ụfọdụ dị mfe
ma dị ịtụnanya "mkpọ ukwe" na-ada.
Dị ka ọmarịcha ọmarịcha ụda example, pịa na eg Pitch (Oscillator B) 105.00
st na Decay 2 (Envelopu B) 500 ms. Nwee anụrị ma buru ibu (mana
ọ bụghị oke)…
Mgbanwe mgbanwe:
Pịa PM A (Oscillator B). Tụgharịa Encoder nwayọọ nwayọọ wee pịa ihe ruru. [50.00%].
Oscillator A na-emezi usoro nke Oscillator B ugbu a. Nke ahụ pụtara, ma oscillators abụọ na-emezi usoro nke ibe ha ugbu a. A na-akpọ nke a cross- ma ọ bụ x-modulation. N'ụzọ dị otú ahụ, a na-emepụta ọtụtụ ụda inharmonic na, ya mere, nsonaazụ sonic nwere ike bụrụ ihe na-adịghị mma ma na-emekarị mkpọtụ. Ha na-adabere nke ukwuu n'ogo ugboro/pitch nke ọ bụla oscillators (biko lee n'elu). Biko nweere onwe gị inyocha ụfọdụ ụkpụrụ Pitch B mara mma na ntọala envelopu B yana ọdịiche nke PM A na PM B yana mgbanwe nke PM A site na envelopu A. N'ụkpụrụ oke uru kwesịrị ekwesị, ị nwere ike mepụta nylon mara mma “plucked strings” na eriri ígwè gụnyere.
Njem nlegharị anya na-edozi nghọta ọsọ ọsọ
N'ezie, ịchọrọ inyocha ọtụtụ ikike igosipụta mgbe ị na-anụ ụtọ ụda gị. C15 na-enye ọtụtụ ikike ime ya (Ribbon Controllers, Pedals wdg). Maka mbido, anyị ga-achọ iwebata ngwa ngwa ahụigodo. Ntọala ndabara ya bụ 30.0 dB nke na-arụ ọrụ nke ọma n'ọtụtụ ọnọdụ.
Ọgbọ ụda
Pịa Ọkwa Vel (envelopu A).
Tụgharịa Encoder wee pịa [0.0 dB] nke mbụ, wee bulite uru nke nta nke nta ka ọ bụrụ
[60.0 dB] mgbe ị na-egwu ụfọdụ ndetu.Tinyegharịa usoro ahụ na envelopu B.
Ebe ọ bụ na envelopu A na-achịkwa ọkwa nke Oscillator A, mgbanwe nke ọsọ ya
22
uru na-emetụta ụda olu dị ugbu a. Ọkwa Oscillator B (nke
Modulator) na-achịkwa envelopu B. Ebe ọ bụ na Oscillator B na-ekpebi
agwa timbral nke ọnọdụ dị ugbu a ruo n'ókè ụfọdụ, ọkwa ya nwere a
nnukwu mmetụta na ụda dị ugbu a.
Oscillator dị ka LFO (Oscillator dị ala):
Ugbu a guzobe C15 gị ka nke ahụ
Oscillator A na-emepụta sine-efegharị kwụ ọtọ (enweghị onwe-PM, enweghị envelopu modulation)
Oscillator B na-emezigharị Oscillator A mgbe niile (ọ dịghịkwa Onwe-PM, enweghị envelopu modulation ebe a). PM B (Oscillator A) kwesịrị inwe uru gburugburu [90.0%] iji mee ka nsonaazụ sonic niile na-esote ngwa ngwa. Oscillator B ekwesịghị ịbụ akụkụ nke mgbama mmepụta a na-anụ, ya bụ B (Mpụta Ngwakọta) bụ [0.0%].
Pịa Pitch (Oscillator B). Zachaa Encoder elu na ala ka ị na-egwu ụfọdụ ndetu.
Wee pịa [0.00 st]. Ị ga-anụ ụda vibrato ngwa ngwa. Ugboro ya dabere na ndetu
egwuri egwu. Pịa Pitch (Oscillator B) ruo mgbe emepụtara Key Trk na ngosi. Tụgharịa encoder wee pịa [0.00%].
Edobere igodo nsochi nke Oscillator B ka ọ bụrụ gbanyụọ ugbu a nke na-ebute ụda ụda mgbe niile (na ọsọ vibrato) n'ofe ndetu niile.
Ugbu a Oscillator B na-eme ka LFO nkịtị (ihe fọrọ nke nta ka ọ bụrụ) enwere ike iji ya dị ka isi iyi maka mgbanwe oge oge na mpaghara ọdịyo. Biko mara na, n'adịghị ka ọtụtụ ndị ọzọ (analog) synthesizers na LFO raara onwe ya nye, na C15 egwuregwu oscillator/LFO kwa olu. A naghị ejikọta ha na usoro nke na-enyere aka ịmegharị ọtụtụ ụda n'ụzọ okike.
Ọgbọ ụda
5 Mkpokọta: Ngalaba Oscillator
Nchikota C15 nke oscillators abụọ na ndị na-akpụzi abụọ, nke envelopu abụọ na-achịkwa, na-enye ohere ịmepụta ụdị ụdị ebili mmiri dị iche iche site na mfe ruo mgbagwoju anya:
Na mbụ, ma Oscillators na-emepụta sine-ebili mmiri (na-enweghị ụda ọ bụla)
Na Self PM na-arụ ọrụ, Oscillator ọ bụla na-emepụta ebili mmiri sawtooth na-agbanwe agbanwe
23
(n'okwu niile)
Mgbe a na-agafe na Shaper, dabere na ntọala nke Drive na Fold, enwere ike ịmepụta rectangle dị iche iche na pulse dị ka ebili mmiri (na-eji ụda na-enweghị atụ).
Ihe njiri mara nke Shaper's Asym(metry) na-agbakwunye ọbụna harmonics.
Mmekọrịta nke paramita ndị a kpọtụrụ aha n'elu na-emepụta timbral sara mbara
ogologo na mgbanwe timbral dị egwu.
· Ịgwakọta ihe abụọ Oscillator/Shaper na ihe mmepụta ihe na-emepụta ụda nwere ihe abụọ sonic, yana nkwụsịtụ na mmetụta na-adịghị mma.
Modulation usoro (PM A / PM B) nke otu Oscillator site na nke ọzọ yana
cross-modulation nwere ike iwepụta ụda inharmonic. Ọnụ ego nke Oscil-
lators na ntọala modulation na-ekpebi nsonaazụ timbral.
Nhazi nke ọma nke pitch, igodo nsochi na ntọala omimi mod bụ mbubata-
ndanda maka timbre nakwa maka ịme ụda ụda dị egwu! Jiri ezigbo mkpebi
iji dozie paramita dị oke mkpa.
· Mmalite nke envelopu A na B na-emepụta njikwa ike n'ọkwa na timbre.
Enwere ike iji oscillators dị ka LFO mgbe enwere nkwarụ igodo nsochi.
Ihe nzacha na-agbanwe agbanwe steeti
Ọgbọ ụda
Iji webata State Variable Filter (SV Filter), anyị kwesịrị ibu ụzọ guzobe ngalaba oscillator ka ọ mepụta sawtooth waveform nke bara ụba na oke ụda. Nke a bụ ezigbo nri mgbama ntinye iji nyochaa nzacha ngbanwe steeti. Nke mbụ, biko buru ụda Init n'oge a, ịkwesighi ịkwanye "A" na igwekota mmepụta!
Tọọ Oscillator A's PM Self ka ọ bụrụ 90% maka ịkwọ ụda dị mma. Tọọ Envelopu A ka ọ bụrụ 60% iji mepụta ụda kwụ ọtọ.
Ugbu a, biko gaa n'ihu dị ka nke a:
24
Na-eme ka nzacha SV:
Pịa SV Filter (ngwakọta mmepụta). Tọọ koodu ahụ ka ọ bụrụ ihe ruru. [50.0%].
Ntinye "SV Filter" nke Ngwakọta mmepụta emepeela nke ọma ugbu a ma ị nwere ike ịnụ mgbaàmà na-agafe nzacha. Ebe emechiela ntinye “A”, ihe niile ị na-anụ bụ mgbama SV Filter.
Pịa A B (State Variable Filter). Oke a na-ekpebi oke dị n'etiti akara Oscillator/Shaper A na B, etinyere na ntinye SV Filter. Maka ugbu a, debe ya na ntọala ndabara ya “A”, ntụgharị [0.0%].
Parameter ndị bụ isi:
Pịa Cutoff (State Variable Filter). SV Filter (mmepụta mmepụta) na-egbuke egbuke iji mee ka ị mara na SV Filter bụ akụkụ nke ụzọ mgbama.
Wepu ihe mkpuchi ahụ n'ofe oke uru niile wee pịa uru ndabara [80.0 st]. Ị ga-anụ ngbanwe e ji mara ya site na-egbukepụ egbukepụ gaa na-ada ada ebe ọ bụ na a na-eji nwayọọ nwayọọ na-ewepụ ụda olu na mgbama. ! N'ebe ntọala dị obere, mgbe ntọala mbelata dị n'okpuru ugboro nke ndetu bụ isi, mgbama mmepụta nwere ike ịbụ nke anaghị anụ ya.
Pịa Reson (State Variable Filter).
Ọgbọ ụda
Wepu ihe mkpuchi ahụ n'ofe oke uru niile wee pịa uru ndabara [50.0 st]. Mgbe ị na-amụba ụkpụrụ resonance, ị ga-anụ ugboro ugboro na gburugburu ntọala nkwụsị na-aghọwanye nke na-adịwanye njọ ma na-apụtawanye ìhè. Mbelata na resonance bụ parampat nzacha kachasị dị irè.
Njem nlegharị anya iji Ribbon 1 na-achịkwa ihe dị ugbu a
Mgbe ụfọdụ, ọ nwere ike ịba uru karịa (ma ọ bụ na-atọ ọchị) ijikwa ihe nrụnye site na iji njikwa rịbọn karịa ihe ngbanwe. Nke a bara uru mgbe ị na-eji paramita na-arụ ọrụ yana ịhazigharị ụkpụrụ nke ọma. Iji kenye Ribbon na otu oke (ebe a Cutoff nke SV Filter), dị mfe:
Pịa Cutoff (State Variable Filter).
25
Pịa na ọnọdụ (Base Unit Control Panel) ruo mgbe Ngosipụta nkeji nkeji na-egosi
Bepụ. A na-akpọkwa ọnọdụ a ọnọdụ Dezie.
Mafee mkpịsị aka gị n'ofe RIBBON 1.
RIBBON 1 na-achịkwa paramita ahọpụtara ugbu a (Cutoff),
ma ọ bụ mkpịsị aka gị
Mgbe ị na-eji njikwa Macro C15, Ribbons / Pedals nwere ike ijikwa parampat dị iche iche n'otu oge. A ga-ekpuchi isiokwu a na-atọ ụtọ na nkuzi ọzọ. Nọrọ na-ekiri.
Na-enyocha ụfọdụ n'ime ihe nzacha SV kachasị elu:
Okwu ndụmọdụ anyị: N'agbanyeghị ma ị maara ihe nzacha n'ozuzu ma ọ bụ na ị maghị, biko jide akwụkwọ ntuziaka onye ọrụ wee wepụta oge iji mụọ parampat niile na-egbuke egbuke SV Filter n'ụzọ zuru ezu.
Njem njem: Ọrụ SV Filter
Ihe nzacha SV bụ ngwakọta nke nzacha abụọ na-emegharị emegharị abụọ na-agbanwe agbanwe steeti, nke ọ bụla nwere mkpọda 12 dB. Enwere ike iji aka chịkwaa mbelata na resonance site na envelopu C na nsochi igodo.
Ọgbọ ụda
Mara Pitch & Pitchbend
Env C
Cutoff Mgbasa igodo Trk Env C
Njikwa mbepụ
Bee 1 2
LBH
Njikwa LBH LBH 1 LBH 2 Bee 1 Reson LBH 1
26
In
Yiri
2-Ogwe SVF
FM
Bee 2 Reson LBH 2
Yiri
X-Fade
pụọ
X-Fade
FM
sitere na AB
2-Ogwe SVF
FM
Oghere dị n'etiti isi ihe nkwụsị abụọ ahụ na-agbanwe ("Spread"). Enwere ike ịsacha njirimara nzacha ahụ mgbe niile site na obere site na band gaa na ọnọdụ ngafe dị elu ("LBH"). Ihe nzacha abụọ a na-arụ ọrụ n'usoro site na ndabara mana enwere ike ịgbanwe ya n'ihu n'ihu na arụ ọrụ yiri ya ("Parallel").
Ịtọba Mgbasa na 0.0 st na-emepụta nzacha osisi anọ dị mfe. N'ụkpụrụ Mgbasa dị elu, oghere dị n'etiti ugboro abụọ Cutoff na-abawanye.
· Cutoff na Resonance na-emetụta akụkụ abụọ nzacha n'otu ụzọ ahụ. LBH na-ekpebi njirimara nke akụkụ abụọ nke nzacha: · L akụkụ abụọ nke nzacha na-arụ ọrụ na ọnọdụ dị ala. A na-ebelata ugboro ole dị elu,
na-emepụta ụda nke a pụrụ ịkọwa dị ka "gburugburu", "dị nro", "abụba", "dull" wdg · H abụọ nzacha ngalaba na-arụ ọrụ na highpass mode. A na-ebelata ugboro ole dị ala,
na-emepụta ụda nke a pụrụ ịkọwa dị ka "nkọ", "mkpa", "na-egbuke egbuke" wdg.
B nke mbụ nzacha ngalaba na-arụ ọrụ dị ka a highpass, nke abụọ dị ka a lowpass. A na-ebelata ugboro ole dị ala na nke dị elu yana eriri ugboro nwere obosara na-agbanwe agbanwe ("Spread") na-agafe SV Filter. Karịsịa na ntọala Resonance dị elu, enwere ike nweta ụda ụdaume/ụda olu.
FM na-enye ngbanwe Cutoff site na akara Oscillator/Shaper A na B. Ọ dị mma maka ụda ike ike na agbagọ.
Lelee paramita ndị a kpọtụrụ aha n'elu ma buru n'uche na ha niile na-emekọ ihe ọnụ n'ụzọ ụfọdụ. Jiri bọtịnụ Ndi an-kpọ iji tọgharịa uru oke.
Ọgbọ ụda
Envelopu / igodo nsochi modul nke Cutoff na Resonance:
Pịa Cutoff (State Variable Filter) ruo mgbe egosipụtara Env C na ngosi.
Tọọ koodu ahụ ka ọ bụrụ [70.00 st].
Ị ga-anụ ụda na-esiwanye ike n'ime oge ebe ọ bụ na
27
A na-ahazi Cutoff site na envelopu C.
Gbanwee ntọala nke parampat envelopu C yana omimi mgbanwe
("Env C"). Maka nzacha dị egwu karịa “sweeps” tọọ Resonance nke SV
Tụgharịa na ụkpụrụ dị elu.
Pịa Cutoff (State Variable Filter) ruo mgbe emepụtara igodo Trk na ngosi.
Wepu ihe mkpuchi ahụ n'ofe niile wee pịa [50.0%].
Mgbe atọrọ na 0.0 %, Cutoff nwere otu uru n'ofe ahụigodo dum
oke. Mgbe ị na-ebelata uru nsochi igodo, uru Cutoff ga-eme
na-abawanye n'ogo ahụigodo dị elu ma ụda na-enwu enwu
mmetụta ị nwere ike ịchọta n'ọtụtụ ngwa egwu.
Biko lelee Env C/ Key Trk modulation nke Resonance yana.
Ịgbanwe àgwà nzacha:
Ihe nzacha SV bụ ihe nzacha osisi anọ nwere nzacha pọọlụ abụọ mejupụtara. The Spread paramita na-ekpebi etiti oge n'etiti ugboro abụọ cutoff nke akụkụ abụọ a.
Tọọ Resonance ka ọ bụrụ [80%]. Pịa Mgbasa (State Variable Filter). Site na ndabara, a na-edozi Mgbasa ka ọ bụrụ 12 semitones. Nwaa ntọala n'etiti 0 na 60
semitones ma na-agbanwekwa Cutoff. Mgbe ị na-ebelata uru Mgbasa, ọnụ ọgụgụ abụọ ahụ ga-emesi nke ọ bụla ike
ndị ọzọ na ihe ga-esi na ya pụta ga-abụ ụda na-ada ụda nke ukwuu.
Ọgbọ ụda
Pịa Mgbasa (State Variable Filter) ọzọ ruo mgbe LBH pụtara na ngosi.
Wepu ihe ngbanwe ahụ n'ofe oke uru niile wee pịa uru ndabara [0.0%] (Lowpass). N'iji paramita LBH, ị nwere ike morph na-aga n'ihu site na pass dị ala site na bandss ruo elu. 0.0% zuru oke, 100.0% dị elu zuru oke. A na-ekpebi obosara nke bandwit site na paramita Mgbasa.
Cutoff FM:
Pịa FM (State variable filter).
Wepu ihe mkpuchi ahụ n'ofe niile.
Ugbu a mgbama ntinye nzacha na-emegharị ugboro ugboro Cutoff. Ọtụtụ mgbe,
ụda na-akawanye njọ na abrasive. Biko mara nke ahụ dị mma
28
na FM na-adịghị mma nwere ike iwepụta nsonaazụ dị iche iche.
Pịa FM (State Variable Filter) ruo mgbe egosipụtara A B na ngosi.
A B na-agwakọta n'etiti akara Oscillator/Shaper A na B ma gbochie-
na-egwupụta oke mgbama nke na-emezigharị ihe nchacha Filter. Dabere
na ebili mmiri na pitch nke ma Oscillator/Shaper akara, nsonaazụ ya
nwere ike ịdị iche nke ukwuu na ibe ya.
Tọgharịa FM na A B na ụkpụrụ ndabara ha.
Ngwakọta mmepụta
Ị bikwasịlarị aka gị na Ngwakọta mmepụta. Ebe ị ga-ahụ ụfọdụ ozi na modul ahụ. Ọ bụrụ naanị na ị na-abata n'oge a, anyị kwesịrị ibu ụzọ tọọ ngalaba oscillator iji mepụta ụdị ebili mmiri sawtooth:
Nke mbụ, biko bunye ụda Init, echefula ịkwanye “A” na igwekota mmepụta!
Tọọ Oscillator A's PM Onwe ka [90%] maka ebili mmiri sawtooth na-ada ụda mara mma. Tọọ Envelopu A ka ọ bụrụ [60%] iji mepụta ụda kwụ ọtọ.
Ugbu a gaa n'ihu, biko:
Ọgbọ ụda
Iji Ngwakọta Mmepụta:
Pịa SV Filter (ngwakọta mmepụta).
Tọọ koodu ahụ ka ọ bụrụ ihe ruru. [50.0%].
Pịa A (Mpụta Ngwakọta).
Tọọ koodu ahụ ka ọ bụrụ ihe ruru. [50.0%].
Ị ka ejikọtala mgbama mmepụta nke SV Filter na kpọmkwem
mgbama (enweghị nzacha) nke Oscillator A.
Wepu ihe mkpuchi ahụ n'ofe oke uru niile wee laghachi na [50.0%].
Ọkwa dị mma na-agbakwunye akara. Ụkpụrụ Ọkwa adịghị mma na-ewepụ ihe ahụ
mgbaàmà sitere na ndị ọzọ. N'ihi ịkagbu usoro, ụkpụrụ dị mma na nke na-adịghị mma nwere ike
rụpụta nsonaazụ timbral dị iche iche ebe a na ebe ahụ. Ọ bara uru ịnwale
ma polarities nke ọkwa. Biko mara na ọkwa ntinye dị elu nwere ike iwepụta saturation a na-anụ
29
mmetụta na-eme ka ụda edgier na/ma ọ bụ karịa ike ike. Iji zere
mgbagha achọghị na s sochirinụtages (dịka ngalaba mmetụta), biko
kwụọ ụgwọ maka mmụba uru site na ibelata ọkwa mmepụta nke igwekota
site na iji Ọkwa (mmepụta Ngwakọta).
Parameter draịva:
Pịa Draịvụ (Mpụta Ngwakọta). Wepu ihe ngbanwe ahụ n'ofe oke uru niile.
Ugbu a, mgbama mmepụta nke igwekota na-agafe sekit na-agbanwe agbanwe nke na-emepụta ihe niile site na mgbagwoju anya dị nro ruo na ụda mangling wildest. Lelee draịvụ draịva Fold na asymmetry kwa. Iji zere mgbagha na-achọghị na s ndị na-esotetages (dịka ngalaba mmetụta), biko kwụọ ụgwọ maka mmụba uru site na ibelata ọkwa mmepụta nke igwekota site na iji Ọkwa (Mpụta Ngwakọta).
Tọgharịa paramita draịva niile na ụkpụrụ ndabara ha.
Ọgbọ ụda
Ihe nzacha Comb
Ihe nzacha Comb nwere ike ịkpụzi ụda na-abata site n'itinye njirimara akọwapụtara na ya. Ihe nzacha Comb nwekwara ike ịrụ ọrụ dị ka onye na-emegharị emegharị na ọ nwere ike imepụta ụdị ebili mmiri nke oge dị ka oscillator n'ụzọ dị otú a. Ọ bụ akụkụ dị mkpa nke ọgbọ ụda C15, ọ nwekwara ike ịba uru mgbe ị na-enweta njirimara imbral nke dịka ụdọ ndị a kpụrụ akpụ ma ọ bụ na-ehulata, ahịhịa amị a fụrụ afụ, mpi, na ọtụtụ ihe dị ịtụnanya dị n'etiti na karịa nke ahụ.
Isi ihe nzacha ihe nlegharị anya Comb
Ka anyị leba anya na nhazi nke C15 Comb Filter:
30
Mgbapụta
AP Tune
Ndewo Cut
igodo Trk
igodo Trk
igodo Trk
Env C
Env C
Env C
Mara Pitch/ Pitchbend
Env C
Njikwa Oge igbu oge
Njikwa ugboro ole etiti
Njikwa mbepụ
In
igbu oge
2-Pole Allpass
1-Obere okporo ụzọ
pụọ
AP Reson
Gbanyụọ/ Gbanyụọ
Njikwa nzaghachi
Igodo ire ure Trk
Ọnụ ụzọ
N'ụzọ bụ isi, nzacha mbo bụ igbu oge nwere ụzọ nzaghachi. Mgbama na-abata na-agafe mpaghara igbu oge ma a na-enyeghachi ụfọdụ akara ngosi na ntinye. Ihe nrịbama na-eme okirikiri ha na nzaghachi nzaghachi a na-emepụta ụda nke nwere ike ịchịkwa site na paramita dị iche iche iji nweta njirimara sonic kpọmkwem na ọkwa nke raara onwe ya nye, a na-atụgharị nzacha mbo ka ọ bụrụ isi iyi resonator / ụda ụda.
Ọgbọ ụda
Na-eme ka nzacha Comb:
Iji nyochaa Comb Filter, pịa na ụda sawtooth dị mfe anyị enweghị ihe mere anyị ga-eji kwere na ị mabeghị otu esi eme nke a. Ọ dị mma, ebe a na-abịa obere ncheta maka ịdị mma gị:
Bunye ụda Init wee tọọ ọkwa igwekota mmepụta ihe A ka ọ bụrụ [50.0%].
Pịa Sustain (Envelopu A).
Tọọ koodu ahụ ka ọ bụrụ ihe ruru. [80.0%].
Pịa PM Self (Oscillator A).
Tọọ koodu ahụ ka ọ bụrụ [90.0%].
Oscillator A na-emepụta ebili mmiri sawtooth na-adịgide adịgide.
Pịa Comb (ngwakọta mmepụta).
Tọọ koodu ahụ ka ọ bụrụ ihe ruru. [50.0%].
Agwakọtala mgbama Comb Filter na mgbama oscillator.
Pịa A B (Comb Filter).
31
Oke a na-ekpebi oke dị n'etiti Oscillator/Shaper
akara A na B, etinyere na ntinye Comb Filter. Maka oge a, biko
Debe ya na ntọala ndabara ya "A", ntụgharị 0.0 %.
Parameter ndị bụ isi
Ọkụ:
Pịa Pitch (Comb Filter). Jiri nwayọ zachaa ihe ngbanwe ahụ n'ofe niile wee pịa [90.00 st].
Biko gbalịakwa ijikwa ya site na RIBBON 1 na ọnọdụ Dezie (biko rụtụ aka na ibe 25). Ị ga-anụ mgbanwe ụda mgbe ị na-atụgharị Encoder. Ogige ahụ
oke bụ n'ezie oge igbu oge nke agbanwere ma gosipụta na semitones. Ụda ụda na-agbanwe agbanwe bụ n'ihi nkwalite ma ọ bụ wepụ kpọmkwem ugboro ole mgbe ejikọtara mgbaàmà na-egbu oge na mgbaàmà na-adịghị egbu oge. Biko nwaa uru na-adịghị mma maka otu ọkwa agwakọta.
Ogo (dB)
20dB 0dB 20dB 40dB 60dB 80dB
Ngwakọta anaghị atụgharị
Oke ugboro ugboro
1.0 2.0 3.0 4.0 5.0
Ogo (dB)
20dB 0dB
0.5 20 dB 40 dB 60 dB 80 dB
Ngwakọta atụgharịrị
1.5 2.5 3.5
Oke ugboro ugboro
4.5
Ọgbọ ụda
ire ure:
Pịa ire ure (nyocha Comb).
Jiri nwayọ zachaa koodu ahụ n'ofe niile.
Gbanwee ma Pitch na Decay wee nwalee mmetụta timbral dị iche iche.
32
Nrụrụ aka na-achịkwa nzaghachi nke igbu oge. Ọ na-ekpebi ego nke
mgbaàmà na-eme gburugburu ya na nzaghachi nzaghachi, ya mere oge ọ na-ewe
n'ihi na oscillating nzaghachi loop ga-agwụ. Nke a dabere nke ukwuu
oge igbu oge akpọrọ ("Pitch"). Mgbe ị na-agbanwe Pitch nwayọọ nwayọọ, ị nwere ike
nụrụ “ọnụ ọnụ” na “ọgbọ mmiri” na ụdịdị dị iche iche, ya bụ agbaliri elu
na attenuated frequencies. Biko mara na enwere ụkpụrụ Decay dị mma na nke na-adịghị mma. Ihe ọjọọ
ụkpụrụ tụgharịrị akụkụ nke mgbama (nzaghachi na-adịghị mma) ma nye
nsonaazụ sonic dị iche iche nwere ụfọdụ agwa “oghere” dị mma maka eg
timbre dị ka mgbịrịgba…
Ihe nzacha Comb na-atọ ụtọ:
Ruo ugbu a, anyị na-eji mgbama ntinye aka kwụgidere/ static na-arụ ọrụ. Ọbụna ihe na-adọrọ mmasị karị bụ iji mkpali na-akpali nzaghachi nzaghachi nke Comb Filter:
Tụgharịa mgbaama mmepụta nke Oscillator/Shaper A ka ọ bụrụ “pịa” dị mkpụmkpụ ma dịkwa nkọ site na ịpị ụkpụrụ paramita dabara adaba maka Envelopu A:
Mwakpo:
0.000 ms
Ebe nkwụsị: 100%
Nkwado:
0.0%
Mbibi 1: Mbibi 2: Mwepụta:
2.0 ms 4.0 ms 4.0 ms
Ọgbọ ụda
Tọọ ire ere (Comb Filter) ka [1000 ms] Tọọ pitch (Comb Filter) ka ọ bụrụ [0.00 st] wee jiri nwayọọ nwayọọ tụgharịa uru nbanye.
mgbe ị na-egwu ụfọdụ ndetu. Wee pịa [60.00 st]. N'ebe dị ala nke oke Pitch, ị ga-ahụ "ntụgharị uche" a na-anụ.
nke ahịrị igbu oge. Ọnụọgụ ha dabere na ntọala Decay (resp. ọkwa nzaghachi). N'ebe dị elu, resp. Oge igbu oge dị mkpụmkpụ, ntụgharị uche na-etowanye ụba ruo mgbe ha na-ada ụda dị ka ụda kwụ ọtọ nke nwere ụda raara onwe ya nye.
Njem njem ụfọdụ mkpụrụ na bolts nke imepụta anụ ahụ
Ihe ị mebere n'ime C15 gị bụ ihe mbụ dị mfeample nke a
Ụdị ụda ọgbọ a na-akpọkarị "Modelling anụ ahụ". Ọ gụnyere a
Mgbama raara onwe ya nye na-ebute ihe na-akpali akpali na onye na-emegharị emegharị, n'ọnọdụ anyị bụ Comb Filter.
Ihe mgbaàmà na-akpali akpali na-akpali resonator, na-emepụta "ụda ụda". Dakọtara
33
A na-akwalite ugboro ọmịiko nke exciter na resonator, ndị ọzọ na-ebelata.
Dabere na pitch nke exciter (Oscillator pitch) na resonator (oge igbu oge
nke Comb Filter), frequencies ndị a nwere ike ịdị iche iche. A na-ekpebi ọkwa ụda olu
site na resonator. Usoro a bụ njirimara nke ọtụtụ ngwa egwu, dịka a
eriri a tụrụ apị ma ọ bụ ọjà na-afụ nke na-akpali ụdị anụ ahụ na-anụ ọkụ n'obi.
Parameter dị elu karịa / Nnụcha ụda
Igodo nsochi:
Pịa Decay (Comb Filter) ruo mgbe egosipụtara igodo Trk na ngosi. Wepu ihe mkpuchi ahụ n'ofe niile wee pịa ihe ruru. [50.0%].
Ugbu a, a na-ebelata Decay na ọkwa ndetu dị elu, ma e jiri ya tụnyere ọkwa ndetu dị ala. Nke a na-emepụta "mmetụta okike", bara uru maka ọtụtụ ụda nke ga-adị ka àgwà ụda kpọmkwem.
Ndewo Cut:
Pịa Hi Cut (Comb Filter). Wepu ihe mkpuchi ahụ n'ofe niile wee kpọọ ndetu. Mgbe ahụ pịa na a
uru nke [110.00 st]. Ụzọ mgbama nke Comb Filter nwere ihe nzacha dị ala nke na-aga-
uates elu frequencies. Na uru kachasị (140.00 st), a ga-emepe paspas dị ala kpamkpam na-enweghị nkwụsịtụ ugboro ugboro, na-enye ụda na-egbuke egbuke. N'ịbelata uru nke nta nke nta, ebe mgbaba dị ala na-amịpụta ụda na-esiwanye ike nke nwere ugboro treble na-ere ngwa ngwa. Ntọala ndị a bara ezigbo uru maka iṅomi dịka ụdọ ndị a dọpụtara.
Ọgbọ ụda
Ọnụ ụzọ:
Pịa Decay (Comb Filter) ruo mgbe egosipụtara ọnụ ụzọ ámá na ngosi.
34
Wepu ihe mkpuchi ahụ n'ofe niile. Kpọọ ndetu ma kpọọ banye
[60.0%].Oke a na-achịkwa ruo ókè mgbama ọnụ ụzọ na-ebelata ire ere
oge nke Comb Filter ozugbo ewepụtara igodo. Mgbe nkwarụ (0.0
%), Nree ga-abụ otu ihe ahụ n'oge niile, n'agbanyeghị ma igodo ọ dị
dara mbà n'obi ma ọ bụ hapụ ya. Karịsịa yana nchikota na igodo nsochi, nke a
na-enyekwa ohere maka nsonaazụ na-ada ụda, dịka chee echiche maka omume ahụ
nke ahụigodo piano.
AP Tune:
Pịa AP Tune (Comb Filter). Jiri nwayọ zachaa Encoder site na oke ya ruo na uru kacha nta ya mgbe
na-emegharị etiti "C" na ahụigodo. Mgbe ahụ pịa [100.0 st]. Oke a na-eme ka ihe nzacha ọ bụla dị n'okporo ụzọ mgbama nke Comb
Iyo. Ọtụtụ mgbe (na-enweghị ihe nzacha allpass), oge igbu oge bụ otu ihe maka ugboro niile na-agafe. All the overtones eme (resp. ha multiples) dabara n'ụzọ zuru oke n'ime oge igbu oge nso a na-akpọ. A na-eṅomi mmetụta a site na nzacha allpass. A na-agbaji ụda ụda nke nzaghachi nzaghachi na-emegide ibe ya site na allpass nke na-emepụta ihe ndị na-adịghị ahụkebe kpọmkwem. A na-emegharị ihe nzacha allpass dị ala, ka a na-emetụta ụda olu karịa, na mgbanwe timbral na-abawanye. A na-anụ mmetụta a dịka n'ime
Ọgbọ ụda
octave kacha ala nke piano, nke na-ada ezigbo ọla. Nke a bụ n'ihi na àgwà anụ ahụ nke eriri piano ndị ahụ dị arọ, bụ́ ndị a na-achọta na octave kasị ala, na-adị nnọọ ka nke tin ígwè ma ọ bụ efere. Pịa AP Tune (Comb Filter) ruo mgbe AP Reson ga-apụta na ngosipụta. Wepu ihe mkpuchi ahụ n'ofe niile ka ị na-egwu ụfọdụ ndetu. Mgbe ahụ kpọọ ihe ruru. [50.0%]. Oke resonance nke ihe nzacha allpass na-agbakwunye ọtụtụ ikike ịkpụpụta ụda. Nyochaa mmekọrịta dị n'etiti AP Tune na AP Reson nke ọma. Ha na-emepụta nso nso nke njirimara sonic nke yiri tine metal, efere, na ndị ọzọ. Tọgharịa parampat AP Tune niile na ụkpụrụ ndabara ha.
Na-agbanwe Settings Exciter (Oscillator A)
35
Ọbụna mgbe mgbaàmà Oscillator anaghị ege ntị, àgwà ya dị oke mkpa maka ụda na-apụta. Ọdịdị envelopu, pitch, na elu ụda olu nke exciter nwere mmetụta dị ukwuu na resonator (Comb Filter).
Ụdị envelopu:
Pịa Sustain (Envelopu A). Tọọ koodu ahụ ka ọ bụrụ ihe ruru. [30.0%] Pịa Mmegide (Envelopu A). Tọọ koodu ahụ ka [100 ms] Pịa Decay 2 (Envelopu A). Tọọ uru ka ọ bụrụ [100 ms] (nke ndabara).
Oscillator A onye na-akpali akpali nke Comb Filter agaghịkwa enye ping dị mkpụmkpụ kama ụda kwụ ọtọ.
Pịa Pitch (Oscillator A). Jiri nwayọ zachaa akara ahụ n'ofe niile wee kpọọ ndetu. Mgbe ahụ pịa
na [48.00 st]. Nwee obi ụtọ… Dabere na Oscillator 1 Pitch, ị ga-ahụ ihe na-atọ ụtọ
ugboro yana kagbuo ugboro ugboro. Àgwà sonic na-echetara (n'elu) ahịhịa amị a fụrụ afụ ma ọ bụ ụdọ akpọda.
Iji "Mgbanwe":
Pịa Fluct (Oscillator A).
Wepu ihe ngbanwe ahụ nwayọ n'ofe niile ka ị na-egwu ụfọdụ ndetu.
Mgbe ahụ kpọọ ihe ruru. [60.0%].
N'ogo dị iche iche dị n'etiti Oscillator A (exciter) na Comb Filter
(resonator), ugboro boosts na attenuations bụ nnọọ ike na
ejedebere na eriri ugboro dị warara. N'ihi ya, ọnụ ọgụgụ kasị elu na ọkwa
na-esi nnọọ ike ijikwa, na mgbe ọ na-esi ike imezu music
nsonaazụ bara uru, dịka ogo ụda ụda na-aga n'ihu gafee nnukwu igodo.
Ihe ngbanwe mgbanwe bụ ihe enyemaka nnabata n'oge a: Ọ na-agbanwe na-enweghị usoro.
bụ oscillator pitch ma si otú a na-emepụta ọtụtụ ugboro bandeji na
nha nha nhata. A na-agbapụta ọnụ ọnụ na ọkwa, na ụda
na-aghọwanye agbanwe agbanwe. The sonic agwa na-agbanwekwa na anyị
36
exampLe, ọ na-esi na ngwa ahịhịa atụgharị gaa n'ọgbọ egwu ụdọ.
Ọgbọ ụda
5 Ntugharị: Iji Comb Filter dị ka onye na-emegharị ihe
Ihe nzacha Comb bụ ahịrị na-egbu oge yana loop nzaghachi, na-ebugharị n'ime oscillation wee si otú a na-emepụta ụda.
· Oke Pitch nke Comb Filter na-ekpebi oge igbu oge wee si otú a na-enwe ụda olu emepụtara.
· Nkwalite ugboro ugboro na kagbuo na nzaghachi nzaghachi na-emepụta nzaghachi ugboro ugboro dị mgbagwoju anya nke na-ekpebi agwa timbral.
· Oke nbibi na-achịkwa ego nzaghachi yana, site na nke ahụ, ọnụọgụ ugboro ugboro nke mgbama ntinye. Nke a na-ekpebi oge ire ere nke ụda resonator mepụtara.
Ihe mgbama oscillator (exciter) na-akpali nzaghachi nke nzacha comb (resonator). · Àgwà nke exciter na-ekpebi àgwà timbral nke ụda na-apụta
ruo n'ókè dị ukwuu. · Mkpirisi mgbama na-akpali akpali na-akpali akpali na-emepụta ụda dị ka eriri adọkapụrụ adọkapụ. Na-akwado
mgbama ndị na-akpali akpali na-emepụta ụda dị ka eriri gbadara agbagọ ma ọ bụ (n'elu) ifufe osisi gbawara agbawa. · Ndepụta igodo na ọnụ ụzọ ámá (na ire ere) yana nzacha dị ala (“Hi Cut”) na-emepụta
njirimara ụda eke nke "ụdọ adọkapụrụ". Ihe nzacha ihe niile (“AP Tune”) nwere ike ịgbanwe ụda olu wee nye njirimara sonic.
tics nke "metal tines" ma ọ bụ "metal plates".
Ọgbọ ụda
Gee Oscillator A (onye na-akpali akpali) na Comb Filter (ihe resonator) iche iche site na ịgbanwe ntọala mixer mmepụta. Igwe oscillator na-emepụta mkpọtụ kwụ ọtọ na nso nso a sara mbara. Ihe nzacha Comb “na-ahọrọ” ugboro ole ya na-agbapụta ma na-ebuli ha elu. N'ihi ya, ọnụọgụ ugboro dị n'etiti exciter na resonator dị mkpa maka ụda na-apụta. Oke dị ka ntọala envelopu olu exciter na ihe niile Comb Filter na-akpụkwa ụda ahụ ma na-emekọrịta ihe. N'ụzọ dị otú ahụ, atụmatụ ịwepụta anụ ahụ nke C15 ga-enye gị nnukwu ubi maka nyocha timbral.
Iji ụzọ nzaghachi
37
Dị ka ị maraworị (opekata mpe, anyị ji obi ike na ị na-eme ya), ụzọ mgbama C15 na-enye ụzọ dị iche iche nke inye nri azụ nke pụtara na enwere ike itinye akara ụfọdụ n'otu ebe na mgbago mgbama wee tinyeghachi ya na mbụ s.tage. Anyị ga-enyocha ugbu a ka esi emepụta ụda site na iji usoro nzaghachi ndị a.
Mbụ, biko bugharịa ụda Init ama ama. Ọ bụrụ na ọ dị mkpa, biko chọta nkọwa zuru ezu na ibe 10.
Nke abụọ, pịa na-ahụkarị Comb Filter ụda nwere àgwà nke eriri a dọpụtara. Nke a ga-achọ
A na-agwakọta ihe nzacha Comb na mmepụta (Comb (Filter Mixer) gburugburu 50%) · mgbama mkpirisi exciter, resp. ụda oscillator na-emebi ngwa ngwa (Envelopu A:
Ire 1 gburugburu 1 ms, Mbelata 2 gburugburu 5 ms) nwere ọtụtụ ụda olu (uru dị elu maka PM Self). Ọ na-enye akụkụ mgbama “kpọwara” nke na-akpali nzacha comb. Ntọala nzacha mbo nwere oge ire ere (ihe dị ka 1200 ms) na ntọala Hi Cut (dịka 120.00 st). Tọọ ọnụ ụzọ ire ere ka ọ bụrụ ihe ruru. 40.0%
Ọ bụrụ na ọ dị mkpa, dozie paramita ahụ ntakịrị ka ọ masịrị gị ruo mgbe C15 dara dị ka ụbọ akwara. Ugbu a, anyị dị njikere ịga n'ihu.
Ọgbọ ụda
Ịtọlite ụzọ nzaghachi:
Dịka e kwuru na mbụ, enwere ike nweta ụda nzacha mbo na-adịgide adịgide site na mkpali na-aga n'ihu nke nzacha comb (resonator). Enwere ike ime nke a site na iji akara oscillator na-adịgide adịgide. Ụzọ ọzọ ị ga-esi na-akpali akpali nke resonator na-enye nri ụfọdụ nke mgbaàmà mmepụta ya azụ na ntinye ya. Na C15, enwere ike ime nke a site na iji mixer nzaghachi, nke a ga-ewebata ugbu a:
Pịa Comb ( Ngwakọta nzaghachi).
Tụgharịa encoder ka ọ bụrụ [40.0%].
Site n'ime nke a, a na-atụtu ego ụfọdụ nke mgbama mmepụta Comb Filter
laghachi na ụgbọ ala nzaghachi. Enwere ike ijikọ ya na mmepụta
akara nke State Variable Filter na ngalaba mmetụta.
Iji mee ka ụzọ nzaghachi zuru ezu, ebe mgbama nzaghachi
kwesịrị ikpebisi ike. Enwere ike ịchọta ebe ndị dị na ebe a
38
Akụkụ Oscillator na Shaper. Anyị ga-eji ebe ntinye "FB Mix".
dị n'azụ Shaper na ụzọ mgbaàmà. Biko rụtụ aka na synth
engine gafereview mgbe ọ dị gị ka ị furu efu n'oge a.
Oscillator A
Shaper A
Oscillator B
Shaper B
Envelopu A Envelopu B Envelopu C
Ngwakọta FB RM
Ngwakọta FB
Nzaghachi mixer Shaper
Ihe nzacha ọkụ
Ngbanwe steeti
Iyo
Ngwakọta mmepụta (Stereo) Shaper
Flanger Cabinet
Nzacha oghere
Echo
Ntughari
Pịa FB Mix (Shaper A). Tụgharịa encoder ka ọ bụrụ [20.0%]. Ugbu a ị nwere ike ịnụ ndetu na-akwado.
A na-akụ mgbama Comb Filter wee laghachi azụ na ntinye Comb Filter dị ka mgbama na-akpali akpali site na mixer nzaghachi na ụgbọ ala nzaghachi. Ọ bụrụ na uru akaghị karịa 1, ọ ga-edobe nzacha ahụ mgbe niile "na-akụ" na ntụgharị onwe ya.
Ịhazi ụda nzaghachi:
… site na iji ntọala ọkwa nzaghachi adịghị mma:
Pịa Comb ( Ngwakọta nzaghachi). Tụgharịa encoder ka ọ bụrụ [40.0%].
Na ntọala adịghị mma, mgbama nzaghachi na-atụgharị. Nke a ga-enwekarị “damping” mmetụta ma na-ebelata ụda emepụtara. Ọ bụrụ na ị na-arụ ọrụ nzacha Comb na ụkpụrụ ire ure na-adịghị mma, ụkpụrụ adịghị mma dị na mixer nzaghachi ga-ebuba ya n'ime oscillation nke onwe.
Pịa ire ure (nyocha Comb). Tụgharịa encoder ka [1260.0 ms].
Ọgbọ ụda
… site n'itinye paramita na-akpụzi mgbama nke igwekota nzaghachi:
Pịa Draịvụ ( Ngwakọta nzaghachi).
39
Wepu ihe mkpuchi ahụ n'ofe niile.
Pịa Draịvụ ( Ngwakọta nzaghachi) ọzọ iji nweta parampat Fold na
Asymmetry.
Wepukwa ihe ntinye koodu n'ofe oke niile.
Dịka ọ dị na igwekota ihe, nzaghachi nzaghachi nwere shaper stage nwere ike
agbagọ mgbaama. The saturation nke a stage na-amachi ọkwa nzaghachi ka
zere mkparị na-achịkwaghị achịkwa. Ọkpụkpụ na-akpụ akpụ na-enye ohere njikwa sonic ụfọdụ
n'elu mgbaàmà onwe-oscillating. Nwalee mmetụta nke “Drive”, “folda” na
"Asymmetry" ma gee ntị nke ọma na nsonaazụ sonic. Ọkwa nzaghachi na
polarity yana paramita mbanye na-emekọ ihe ọnụ.
… site na imeghari ntọala envelopu/Oscillator A (exciter):
N'agbanyeghị nke ahụ, a na-emepụta ụda a na-anụ naanị site na nzacha mbo. Oscillator A na-emepụta ihe ọ bụla ma ọ bụghị obere mgbama exciter nke na-emetụta ụdị ebili mmiri na-apụta na mmepụta nke Comb Filter mana ọ naghị anụ n'onwe ya. Enwere ike nweta ọtụtụ ọdịiche timbral site na ịhazigharị paramita nke Oscillator A na envelopu A ya.
Tọgharịa Parameters of Drive (Nzaghachi nzaghachi) site na iji bọtịnụ Ndi an-kpọ Pịa Pitch (Oscillator A). Wepu ihe ntinye koodu n'ofe ya niile ka ị na-egwu ndetu wee pịa banye
[72.00 nke afọ]. Pịa Sustain (Envelopu A).
Gbalịa ọkwa Sustain dị iche iche mgbe ị na-egwu ndetu wee pịa ihe ruru. [5% ]. Pịa Fluct (Oscillator A). Gbalịa ọkwa mgbanwe dị iche iche mgbe ị na-egwu ndetu.
Site n'ịgbanwe envelopu, pitch, na ụdị akara ngosi nke Oscillator A, Comb-Filter na-eme onwe ya ga-emepụta plethora nke timbres dị iche iche. Biko nwaa ogologo oge ọgụ na ire ere yana ntọala dị iche iche nke PM, Self, na Ngwakọta nzaghachi na ihe ngwakọta FB.
Ọgbọ ụda
… site na nzacha mgbama nzaghachi site na iji nzacha mgbanwe steeti:
Nke mbụ, ka anyị laghachi na ntọala akọwapụtara nke ọma (na nke a ma ama):
Cheta ụda Init.
Tọọ Comb (ngwakọta mmepụta) ka ọ bụrụ [50%].
Tọọ ire 1 (Envelopu A) ka ọ bụrụ 1 ms yana ire 2 (Envelopu A) ka [5 ms].
40
Tọọ PM Self ka ọ bụrụ [75%].
Tọọ ire ere (Comb Filter) ka [1260 ms] na Hi Cut ka [120.00 st].
Ugbu a, anyị na-eke ụzọ nzaghachi nzaghachi pụrụ iche:
Pịa Ngwakọta Comb (State Variable Filter). Tụgharịa encoder ka [100.0%]. Pịa SV Filter ( Ngwakọta nzaghachi). Tụgharịa encoder ka [50.0%]. Pịa FB Mix (Oscillator A). Tụgharịa encoder ka ọ bụrụ [25.0%].
A na-edobe ihe nzacha mgbanwe steeti ugbu a n'ime ụzọ nzaghachi ma na-ahazi mgbama na-abịarute site na Comb Filter.
Pịa Mgbasa (State Variable Filter) ruo mgbe agbanyere [L - B - H]. Tụgharịa Encoder ka ọ bụrụ [50.0 %] iji mee ka ntọala bandwit nwee ike. Pịa Reson (State Variable Filter). Tụgharịa encoder ka ọ bụrụ [75.0%].
Ihe nzacha SV na-arụ ọrụ ugbu a dị ka ngafe dị warara, na-ahọrọ eriri ugboro maka loop nzaghachi.
Pịa Cutoff (State Variable Filter). Jiri nwayọ zachaa Encoder n'ofe niile wee pịa uru ahụ
masịrị gị ntị, ka anyị kwuo [80.0 st]. Ịhazi nzaghachi nzaghachi site na iji SV Filter na-arụpụta ọmarịcha
nsonaazụ timbral. Site n'ịgbanwe bandwit ahụ, ọscillation nke onwe na-apụta naanị mgbe band ahụ na-adakọ otu n'ime ihe mkpuchi nke Comb Filter nwere ike.
mepụta. Ikpochapụ SV Filter Cutoff ga-emepụta usoro nke ụda olu. Biko buru n'uche na ihe niile ị na-anụ bụ mgbaama mmepụta nke Comb Filter SV Filter bụ naanị akụkụ nke ụzọ nzaghachi (n'etiti Comb Filter na Feedback Mixer) ma na-enye mgbama nzaghachi nhọrọ. Oscillator A na-akpali Comb Filter ma ọ naghị ege ntị dị ka nke a.
… site na iji nsonaazụ nsonaazụ dị ka mgbama nzaghachi:
Ụzọ ọzọ na-atọ ụtọ ịkpụzi comb filter / ụda ihe nlegharị anya anụ ahụ nke C15 bụ iji ụzọ nzaghachi nke ngalaba mmetụta. Nke mbụ, gbanyụọ SV Filter n'ụzọ nzaghachi nke Comb Filter (n'ezie, nzaghachi nzaghachi na-enye ọtụtụ ụzọ nzaghachi n'otu oge ma, maka oge a, anyị chọrọ ime ka ihe dị mfe):
Pịa SV Filter ( Ngwakọta nzaghachi).
Tụgharịa encoder ka ọ bụrụ [0.0%].
41
Ọgbọ ụda
Ịnyeghachi mgbaama sitere na ngalaba Mmetụta gaa na Comb Filter:
Pịa Mmetụta ( Ngwakọta nzaghachi). Tụgharịa Encoder nwayọọ nwayọọ wee pịa uru nke na-ewepụta ndepụta dị nro -
ụda azụ. Uru gbara gburugburu [50.0%] kwesịrị ịrụ ọrụ nke ọma. Pịa oke ngwakọta nke mmetụta ọ bụla wee pịa uru ngwakọta dị elu.
Ugbu a, ị na-anụ mgbaàmà nzaghachi nke yinye mmetụta na-akpali akpali nzacha comb. Mgbe ị na-eme nke a, ị ga- (atụ anya) ga-eju ụfọdụ staggering soundscaps. Mmetụta ọ bụla n'otu n'otu na-enye ọgwụgwọ dị iche iche nke mgbaàmà nzaghachi ma si otú a na-enye aka dị iche iche na ụda ụda. Enwere ike iji kabinet gbanwee ọdịnaya kwekọrọ mgbe ihe nzacha Gap (nke bụ otu ìgwè jụrụ nzacha nke na-ebipụ oge ụfọdụ) bara uru ijikwa nzaghachi ugboro ole nke mgbama nzaghachi. Flanger, Echo, na Reverb na-agbakwunye akụkụ dị iche iche nke oghere yana mmegharị na ụda. Biko mara na enwere ike ịhazigharị ọnụọgụ nzagharị n'ụzọ nzaghachi iche iche site na paramita Rev Mix nke Ngwakọta nzaghachi.
5 Mkpokọta: Ụzọ nzaghachi
Ọgbọ ụda
Ya na ngalaba Oscillator / Shaper na Comb Filter, nzaghachi
Ụzọ nke C15 na-enye ike ịṅomi anụ ahụ na-adọrọ mmasị.
Iji ụzọ nzaghachi na-arụpụta ụda na-adịgide adịgide na-ejighi oscilla na-akwado.
ntọala tor (exciter) dị mma maka ụda nwere nkụ nkụ, ọla, na ụdọ akpọda-
dị ka agwa.
· Ka ịtọlite ụzọ nzaghachi, họrọ ma mee ka mgbama isi mmalite dị n'ime nzaghachi
Ngwakọta na ihe ngwakọta FB na ngalaba Shaper. The polarity nke nzaghachi
ego nwere ike ịdị mkpa maka ụda.
· Paragraf draịva nke Ngwakọta nzaghachi nwere ike ịkpụzi ụda nzaghachi.
Ịgbanwe ntọala exciter (Oscillator A na envelopu A) nwekwara mmetụta na ya
ụda na-esi na ya pụta.
Enwere ike iji ihe nzacha dị iche iche nke steeti họrọ oke ụda maka ntugharị onwe ya.
42
Enwere ike ịnyeghachi akara ngosi nke nsonaazụ ya site na igwekota nzaghachi.
43
Ọgbọ ụda
Akwụkwọ / akụrụngwa
 |
Nkuzi Ọgbọ nke ụda C15 na-anọghị n'ịntanetị [pdf] Akwụkwọ ntuziaka Nkuzi nkuzi nke ọgbọ C15, C15, nkuzi nke ọgbọ, nkuzi ọgbọ, nkuzi |
