Iibhokisi ze-I/O ezikude (PROFINET)
I-ADIO-PN
IMVELISO YEMVELISO 
Ukhuseleko lwakho, funda kwaye ulandele iingqwalasela ezibhalwe kwincwadana yemiyalelo, ezinye iimanyuwali kunye neeAutonics webindawo.
Iinkcukacha, imilinganiselo, njl.njl. zinokutshintshwa ngaphandle kwesaziso sokuphucula imveliso. Ezinye iimodeli zinokuyekwa ngaphandle kwesaziso.
Iimbonakalo
- Iprothokholi yonxibelelwano lwenqanaba eliphezulu: PROFINET
- Iprothokholi yonxibelelwano yenqanaba elisezantsi:10-1_41k ver. 1.1 (iklasi yezibuko: Udidi A)
- Isixhobo sezindlu: iZinc Die casting
- Umgangatho wokhuseleko: IP67
- Itsheyini yedaisy ivumela unikezelo lwamandla ethayile usebenzisa itekhnoloji yoqhagamshelo kwisidibanisi esisemgangathweni se-7/8”
- Ubuninzi bemveliso yangoku yonikezelo lwamandla: 2 A kwizibuko ngalinye
- I/O useto lwezibuko kunye nokujongwa kwesimo (intambo emfutshane/ uqhawulo, ubume boqhagamshelo, njl.njl.)
- Ixhasa icebo lokucoca idijithali
Iingqwalasela zoKhuseleko
- Qwalasela zonke 'Iingqwalasela zoKhuseleko' ukuze usebenze ngokukhuselekileyo nangokufanelekileyo ukuphepha iingozi.
uphawu lubonisa ukulumka ngenxa yeemeko ezizodwa apho iingozi zinokuthi zenzeke.
Isilumkiso Ukungaphumeleli ukulandela imiyalelo kunokubangela ukwenzakala kakhulu okanye ukufa.
- Isixhobo esingakhuselekanga kufuneka sifakelwe xa kusetyenziswa iyunithi enoomatshini abanokubangela ukwenzakala okukhulu okanye ilahleko enkulu kwezoqoqosho. izixhobo, njl.) Ukungaphumeleli ukulandela lo myalelo kunokubangela ukwenzakala komntu, ilahleko yezoqoqosho okanye umlilo.
- Musa ukusebenzisa ukufuma okuphezulu, i-unincl? I-te in thetslplace gt, ubushushu obukhazimlayo, obunokutsha/uqhushumbo/i-ay( 'iingqimba zisenokubakho. Ukungaphumeleli ukulandela lo myalelo kunokubangela ugqabhuko-dubulo okanye umlilo.
- Musa ukudibanisa, ukulungisa, okanye ukuhlola iyunithi ngelixa uqhagamshelwe kumthombo wamandla. Ukungaphumeleli ukulandela lo myalelo kunokubangela umlilo.
- Jonga 'Unxibelelwano' ngaphambi kwentambo. Ukusilela ukulandela lo myalelo kunokubangela umlilo.
- Musa ukuqhawula okanye ukuguqula iyunithi Ukungaphumeleli ukulandela lo myalelo kunokubangela umlilo.
- Ungayichukumisi imveliso ngexesha lokusebenza okanye ixesha elithile emva kokuyeka.
Ukungaphumeleli ukulandela lo myalelo kunokubangela i-bum.
Isilumkiso Ukungaphumeleli ukulandela imiyalelo kunokubangela ukulimala okanye umonakalo wemveliso.
- Sebenzisa iyunithi ngaphakathi kweenkcazo ezilinganisiweyo. Ukungaphumeleli ukulandela lo myalelo kunokubangela ukuba umva ucuthe umjikelo wobomi bemveliso.
- Sebenzisa ilaphu elomileyo ukucoca iyunithi, kwaye ungasebenzisi amanzi okanye i-solvent ephilayo. Ukungaphumeleli ukulandela lo myalelo kunokubangela umlilo.
- Gcina imveliso kude netshiphu yesinyithi, uthuli, kunye nentsalela yocingo olungena kwiyunithi. Ukungaphumeleli ukulandela lo myalelo kunokubangela ukonakala kwemveliso yomlilo.
- Qhagamshela intambo ngokuchanekileyo kwaye uthintele ukudibana kakubi Ukungaphumeleli ukulandela lo myalelo kunokubangela ukonakala komlilo okanye imveliso.
- Musa ukuqhagamshela okanye ukuqhawula ucingo lwentambo ngelixa usebenza iyunithi Ukungaphumeleli ukulandela lo myalelo kunokubangela umlilo okanye umonakalo wemveliso.
Izilumkiso ngexesha lokusetyenziswa
- Landela imiyalelo 'kwiZilumkiso ngexesha lokuSebenzisa: Kungenjalo, kunokubangela iingozi ezingalindelekanga.
- Amandla e-LA (amandla e-actuator) kunye namandla ase-US (amandla e-sensor) kufuneka afakwe kwisixhobo sombane esizimeleyo.
- Unikezelo lwamandla kufuneka lufakwe kwi-insulated kunye nomthamo omncincitage/yangoku okanye iClass 2, i-SELV isixhobo sokubonelela ngombane.
- Sebenzisa iintambo eziqhelekileyo kunye nezihlanganisi. Musa ukusebenzisa i-pogger egqithisileyo xa udibanisa okanye uqhawula izihlanganisi zemveliso.
- Gcina kude kwivolthi ephezulutagiintambo ze-e okanye iintambo zombane ukunqanda ingxolo ye-inductive. Kwimeko yokuhlohla umgca wamandla kunye nomgca wesignali yegalelo ngokusondeleyo, sebenzisa isihluzo somgca okanye i-orvaristor kumgca wamandla kunye nocingo olukhuselekileyo kwisignali yegalelo. Ukusebenza okuzinzileyo, sebenzisa i-shield wire kunye ne-ferrite core, xa i-wiring yonxibelelwano yocingo, i-power wire, okanye i-signal wire.
- Musa ukusebenzisa kufutshane nesixhobo esenza amandla ombane anamandla okanye ingxolo ephezulu yamaza.
- Musa ukudibanisa, okanye ukususa le yunithi ngelixa uqhagamshelwe kumthombo wamandla.
- Le yunithi ingasetyenziswa kwiimeko ezilandelayo.
-Ngaphakathi (kwimeko yemo engqongileyo ifakwe 'kwiNgcaciso')
-Ukuphakama okuphezulu. 2,000m - Isidanga songcoliseko 2
– Udidi lofakelo II
Uqwalaselo lwe-ADIO-PN
Umfanekiso ongezantsi ubonisa inethiwekhi ye-PROFINET kunye nezixhobo eziyibumbayo.
Ukusetyenziswa ngokufanelekileyo kwemveliso, bhekisa kwiincwadana kwaye uqiniseke ukuba ulandela ingqwalasela yokhuseleko kwiincwadana.
Khuphela iimanyuwali ezivela kwi-Autonics webindawo.
01) Isoftware yocwangciso lweprojekthi yenkqubo yonxibelelwano yenqanaba eliphezulu inokwahluka ngokuxhomekeke kwindawo yomsebenzisi.
Ngolwazi oluthe vetshe, jonga kwincwadana yemigaqo yomenzi.
■ Iiparamitha ezixhaswayo
| Imo yokusebenza | Ilizwe eliKhuselekileyo 01) | Ukuqinisekiswa | Ukugcinwa kwedatha | Isihluzo segalelo 01) | Isazisi somthengisi | I-ID yesixhobo | Ixesha lomjikelo |
| Igalelo ledijithali | – | – | – | ○ | – | – | – |
| Iziphumo zoDijithali | ○ | – | – | – | – | – | – |
| Igalelo le-10-Link | – | ○ | ○ | – | ○ | ○ | ○ |
| 10-Link Isiphumo | – | ○ | ○ | – | ○ | ○ | ○ |
| I-10-Link Input / Output | – | ○ | ○ | – | ○ | ○ | ○ |
Ukuodola Ulwazi
Oku kuphela kwereferensi, imveliso yokwenyani ayixhasi zonke iindibaniselwano.
Ukukhetha imodeli echaziweyo, landela i-Autonics webindawo.
❶ Iinkcukacha ze-I/O
N: NPN
P: PNP
Amacandelo eMveliso
- Imveliso (+ Isigqubuthelo esikhuselayo sokutshintsha okujikelezayo)
- Amacwecwe amagama × 20
- I-M4×10 isikrufu ngewasha × 1
- Incwadi yomyalelo × 1
- Isigqubuthelo esingenamanzi × 4
Ithengiswa ngokwahlukeneyo
- Iipleyiti zamagama
- Isigqubuthelo sokungangeni manzi
Isoftware
Khuphela ufakelo file kunye neencwadana ezivela kwi-Autonics webindawo.
- kwiIOLink
I-atIOLink ngeenjongo zokuseta, ukuxilongwa, ukuqaliswa kunye nokugcinwa kwesixhobo se-IO-Link nge-IDD file ibonelelwa njengeSixhobo esizinikeleyo soLungiso lweSixhobo kunye neSixhobo (PDCT).
Uqhagamshelwano
■ I-Ethernet port
| M12 (I-Socket-Female), i-D-coded | Iphini | Umsebenzi | Inkcazo |
 |
1 | TX + | Dlulisa idatha + |
| 2 | RX + | Fumana iDatha + | |
| 3 | TX - | Dlulisa idatha - | |
| 4 | RX- | Fumana iDatha- |
■ Indawo yokubonelela ngombane
| PHUMA (7/8″, Socket- Female) | IN (7/8″, Iplagi-Male) | Iphini | Umsebenzi | Inkcazo |
 |
 |
1, 2 | 0 V | Ubonelelo lwenzwa kunye ne actuator |
| 3 | FG | Umhlaba wesakhelo | ||
| 4 | +24 VDC  |
Ubonelelo lwenzwa | ||
| 5 | +24 VDC |
Ubonelelo lweActuator |
■ Izibuko lePDCT
| i M12 (Socket-Female), A-coded | Iphini | Umsebenzi |
 |
1 | Ayiqhakamshelwanga (NC) |
| 2 | Idatha- | |
| 3 | 0 V | |
| 4 | Ayiqhakamshelwanga (NC) | |
| 5 | Idatha + |
■ I/O izibuko
| M12 (I-Socket-Female), i-A-coded | Iphini | Umsebenzi |
 |
1 | +24 VDC |
| 2 | I/Q: Igalelo leDijithali | |
| 3 | 0 V | |
| 4 | C / Q: I-10-Link, i-Digital Input / Output | |
| 5 | Ayiqhakamshelwanga (NC) |
Imilinganiselo
- Iyunithi: mm, Kwimilinganiselo eneenkcukacha yemveliso, landela iAutonics webindawo.
Iinkcazelo zeyunithi
| 01. Umngxuma womhlaba 02. Umngxuma wokunyuka 03. Inxalenye yokufaka ipleyiti yegama 04. Izibuko le-Ethernet 05. Izibuko lokubonelela ngombane |
06. Izibuko lePDCT 07. I/O izibuko 08. Ukutshintsha okujikelezayo 09. Isalathisi semeko 10. I/O isalathisi sezibuko |
Ukuhlohla
■ Ukuxhoma
- Lungisa ipaneli ecaba okanye yentsimbi kwindawo ebiyelweyo.
- Gqoka umngxuma ukuze uyifake kwaye uyicole imveliso phezu komhlaba.
- Cima onke amandla.
- Lungisa imveliso usebenzisa i-M4 screws kwimingxuma yokunyuka.
Ukuqinisa itorque: 1.5 N m
■ Ukuthoba
Qinisekisa ukusebenzisa ikhebula kunye ne-impedance ephantsi kwaye ibe mfutshane kangangoko ukudibanisa indlu kwimveliso.
- Xhuma umtya wokumisa kunye ne-M4 × 10 isikrufu ngewasha.
- Lungisa isikrufu kumngxunya wokumisa.
Ukuqinisa itorque: 1.2 N m
Izicwangciso zeGama lesiXhobo
Ukuqhagamshela kwinethiwekhi ye-PROFINET, qwalasela i-interface ye-PROFINET. Igama lesixhobo se-PROFINET lingamiselwa ngokusebenzisa iindlela ezilandelayo.
- Ukutshintsha okujikelezayo
Qinisekisa ukuba ubeke itywina lekhava yokukhusela ngokuqinileyo kwiitshintshi ezijikelezayo emva kokugqiba izicwangciso.
Umlinganiselo wokukhusela awuqinisekiswanga xa i-inshorensi ekhuselayo ivuliwe.
- Jikelezisa iiswitshi ezijikelezayo ukuseta igama lesixhobo. I-LED eluhlaza yesalathisi sase-US sidanyaza.
Imo yokumisela Ukutshintsha okujikelezayo Inkcazo Ixabiso PROFINET Igama leSixhobo 0 Igama lesixhobo ligcinwe kwi-ADIO-PN's EEPROM.
Ukusebenzisa igama lesixhobo elimiselweyo kwi-PROFINET Master okanye izixhobo ze-DCP.PROFINET igama lesixhobo 001 ukuya 999 Seka uqhagamshelwano lonxibelelwano emva kokuseta igama lesixhobo se-ADIO-PN. Ixabiso lokutshintsha okujikelezayo liboniswa ekugqibeleni kwegama lesixhobo. I-ADIO-PN-MA08A-ILM- - Vula i-ADIO-PN kwakhona.
- Khangela ukuba i-LED eluhlaza yesilathisi sase-US IVULIWE.
- Igama lesixhobo litshintshiwe.
- Beka ikhava yokukhusela kwiitshintshi ezijikelezayo.
■ kwiIOLink
Igama lesixhobo se-PROFINET eliqwalaselwe yi-atIOLink isoftwe igcinwe kwi-ADIO-PN's EEPROM. Ngolwazi oluthe vetshe, jonga kwi-atIOLink User Manual.
Uqhagamshelo lwePort
■ Iinkcukacha zezibuko
- Qinisekisa ukujonga iinkcukacha zezibuko ngezantsi phambi kokuqhagamshela isixhobo. Lungiselela intambo ehambelana nomgangatho wokhuseleko IP67.
| Ethernet port | I/O izibuko | Izibuko lePDCT | Izibuko lokubonelela ngombane | |
| Uhlobo | I-M12 (I-Socket-Female), i-4-pin, i-D-coded | I-M12 (I-Socket-Female), i-5-pin, i-A-coded | I-M12 (I-Socket-Female), i-5-pin, i-A-coded | Igalelo: 7/8″ (Plag-Male), 5-pin Isiphumo: 7/8″ (Socket-Female), 5-pin |
| Tyhala-Tsalo | EWE | EWE | EWE | N / A |
| Inani lamazibuko | 2 | 8 | 1 | 2 |
| Ukuqinisa itorque | 0.6 N m | 0.6 N m | 0.6 N m | 1.5 N m |
| Umsebenzi oxhaswayo | Ikhonkco leDaisy | Unxibelelwano lwe-serial ye-USB | Ikhonkco leDaisy |
- ExampIntambo yonxibelelwano yezibuko lePDCT
| Isinxibelelanisi 1 | Isinxibelelanisi 2 | Iintambo |
 M12 (Plug-Male), 5-pin |
 Uhlobo lwe-USB A (Iplagi-Male) |
 |
- Qhagamshela kwiPROFINET
01. Qhagamshela i-M12 isinxibelelanisi kwi-Ethernet port. Jonga unxibelelwano olungezantsi.
1 TX + Dlulisa idatha + 2 RX + Fumana iDatha + 3 TX - Dlulisa idatha - 4 RX- Fumana iDatha- 02. Qhagamshela isiqhagamshelanisi kwinethiwekhi ye-PROFINET.
• Isixhobo senethiwekhi: PLC okanye isixhobo sePROFINET esixhasa iprotocol yePROFINET
03. Beka isigqubuthelo sokungena manzi kwizibuko elingasetyenziswanga. - Qhagamshela izixhobo ze-IO-Link
Ubuninzi bemveliso yangoku yi-2 A kwi-port nganye ye-I/O. Qwalasela isixhobo ukuze umbane opheleleyo wamazibuko we-I/O ungagqithi kwi-9 A.
Jonga ulwazi lweingcingo kwimanuwali yesixhobo se-IO-Link esiza kuqhagamshelwa.
01. Qhagamshela umdibaniso we-M12 kwi-port ye-I/O. Jonga unxibelelwano olungezantsi.
1 +24 VDC 2 I/Q: Igalelo leDijithali 3 0 V 4 C / Q: I-10-Link, i-Digital Input / Output 5 Ayiqhakamshelwanga (NC) 02. Beka isigqubuthelo sokungena manzi kwizibuko elingasetyenziswanga.
- Qhagamshelana ne-atIOLink
Musa ukusebenzisa i-PDCT port kunye ne-Ethernet port ngexesha elinye.
01. Qhagamshela umdibaniso we-M12 kwizibuko le-PDCT. Jonga unxibelelwano olungezantsi.
1 Ayiqhakamshelwanga (NC) 2 Idatha- 3 0 V 4 Ayiqhakamshelwanga (NC) 5 Idatha + 02. Qhagamshela isinxibelelanisi kwisixhobo senethiwekhi.
• Isixhobo senethiwekhi: I-PC/ilaptop efakwe kwi-software ye-IOLink
03. Beka isigqubuthelo sokungena manzi kwizibuko elingasetyenziswanga. - Qhagamshela ubonelelo lwamandla kwi-ADIO
Qinisekisa ukuba awugqithi kwi-9 A yowona mkhulu wokubonelela ngoku kuluvo (US).
01. Cima onke amandla.
02. Qhagamshela i-7/8″ isidibanisi kwindawo yonikezelo lwamandla. Jonga unxibelelwano olungezantsi.
| 1, 2 | 0 V | Ubonelelo lwenzwa kunye ne actuator |
| 3 | FG | Umhlaba wesakhelo |
| 4 | +24 VDC |
Ubonelelo lwenzwa |
| 5 | +24 VDC |
Ubonelelo lweActuator |
Iimpawu
■ Sisalathisi sesithathu
- Unikezelo lwamandla lwenzwa
Isalathisi I-LED umbala Ubume Inkcazo US Luhlaza
ON Ukusetyenziswa voltage: eqhelekileyo Ukudanyaza (1 Hz) Izicwangciso zokutshintsha kwe-rotary ziyatshintsha. Bomvu Ukudanyaza (1 Hz) Ukusetyenziswa voltage: phantsi (＜ 18 VDC ) - Ubonelelo lwamandla e-actuator
Isalathisi I-LED umbala Ubume Inkcazo UA Luhlaza ON Ukusetyenziswa voltage: eqhelekileyo Bomvu Ukudanyaza (1 Hz) Ukusetyenziswa voltage: phantsi (＜ 18 VDC ), Impazamo kwiiswitshi ezijikelezayoON Ukusetyenziswa voltage: akukho nanye (＜ 10 VDC ) - Ukuqaliswa kwemveliso
Isalathisi I-LED umbala Ubume Inkcazo US, UA Bomvu ON Ukusilela kokuqaliswa kwe-ADIO - Ukusilela kwenkqubo
Isalathisi I-LED umbala Ubume Inkcazo SF Bomvu CIMA Akukho mpazamo ON Ukuphela kwexesha lokulinda, impazamo yenkqubo Ukudanyaza Inkonzo yomqondiso weDCP iqalwa ngebhasi. - Ukusilela kwebhasi
Isalathisi I-LED umbala Ubume Inkcazo BF Bomvu CIMA Akukho mpazamo ON Isantya esisezantsi sekhonkco lomzimba okanye akukho khonkco lomzimba Ukudanyaza Akukho lugqithiso lwedatha okanye useto lolungelelwaniso - Uqhagamshelo lwe-Ethernet
Isalathisi I-LED umbala Ubume Inkcazo L/A1 L/A2 Luhlaza
CIMA Akukho nxibelelwano lwe-Ethernet ON Uqhagamshelo lwe-Ethernet lusekiwe. Lubhelu Ukudanyaza Ukuhanjiswa kwedatha - Isantya sothumelo lwe-Ethernet
Isalathisi I-LED umbala Ubume Inkcazo 100 Luhlaza ON Izinga lokudluliselwa: 100 Mbps
■ I/O isalathisi sezibuko
- Iphini 4 (C/Q)
Isalathisi I-LED umbala Ubume Inkcazo 0 Lubhelu
CIMA DI/YENZA: pin 4 OFF ON DI/YENZA: pin 4 ON Luhlaza
ON Ubumbeko lwePort: IO-Link Ukudanyaza (1 Hz) Ubumbeko lwePort: IO-Link, Akukho sixhobo se-IO-Link sifunyenweyo Bomvu Ukudanyaza (2 Hz) Impazamo yoqwalaselo lwe-IO-Link
• Ukuqinisekisa akuphumelelanga, ubude bedatha obungasebenziyo, impazamo yoGcino-nkcukachaON • I-NPN: Isekethe emfutshane yenzeke kwimveliso ye-pin 4 kunye ne-pin 1
• I-PNP: Isekethe emfutshane yenzeke kwimveliso ye-pin 4 kunye ne-pin 3 - iPin 2 (I/Q)
Isalathisi I-LED umbala Ubume Inkcazo 1 Lubhelu CIMA DI: pin 2 OFF ON DI: pin 2 ON - Unikezelo lwamandla kwizibuko le-I/O
Isalathisi I-LED umbala Ubume Inkcazo 0,1 Bomvu Ukudanyaza (1 Hz) Isiphaluka esifutshane senzeke kumandla onikezelo lwe-I/O (pin 1, 3)
Iinkcukacha
■ Imiba yoMbane/yoomatshini
| Ubonelelo Umqulutage | 18 – 30 VDC |
| Ikaliwe Umqulutage | 24 VDC |
| Okwangoku ukusetyenziswa | 2.4 W ( ≤ 216 W) |
| Ukubonelela yangoku kwizibuko ngalinye | ≤ 2 A/Port |
| Isivamvo yangoku (US) | ≤ 9 A |
| Imilinganiselo | W 66 × H 215 × D 38 mm |
| Izinto eziphathekayo | Zinc Die casting |
| I-Ethernet izibuko | M12 (Socket-Female), 4-pin, D-coded, Push-Tsala Inani lamazibuko: 2 (IN/OUT) Umsebenzi oxhaswayo: daisy chain |
| Izibuko lokubonelela ngombane | Igalelo: 7/8” (Plug-Male), 5-pin Isiphumo: 7/8” (Socket-Female), 5-pin Inani lamazibuko: 2 (IN/OUT) Umsebenzi oxhaswayo: daisy chain |
| I-PDCT izibuko | M12 (Socket-Female), 5-pin, A-coded, Push-Tsala Inani lamazibuko: 1 Indlela yoQhagamshelwano: Unxibelelwano lwe-serial ye-USB |
| I/O izibuko | M12 (Socket-Female), 5-pin, A-coded, Push-Tsala Inani lamazibuko: 8 |
| Ukunyuka indlela | Umngxuma wokunyuka: ulungiswe nge-M4 screw |
| Ukuthoba indlela | Umngxuma womhlaba: ulungiswe nge-M4 screw |
| Iyunithi ubunzima (ipakishiwe) | ≈ 700 g (≈ 900 g) |
■ Imiba yemowudi
| Imowudi | Igalelo ledijithali |
| Inani of imijelo | I-16-CH (I/Q: 8-CH, C/Q:8-CH) |
| I/O common | I-NPN / PNP |
| Igalelo yangoku | 5 mA |
| ON Umqulutage/yangoku | Umqulutage: ≥ 15 VDC Okwangoku: ≥ 5 mA |
| CIMA Umqulutage | ≤ I-VDC eyi-5 |
■ Imiba yemowudi
| Imowudi | Iziphumo zoDijithali |
| Inani of imijelo | 8-CH (C/Q) |
| I/O common | I-NPN / PNP |
| Amandla ubonelelo | 24 VDC (18 – 30 VDC ), uMax. 300 mA |
| Ukuvuza yangoku | ≤ 0.1 mA |
| Intsalela Umqulutage | ≤ I-VDC eyi-1.5 |
| Mfutshane isiphaluka ukhuselo | EWE |
■ Imiba yemowudi
| Imowudi | IO Link |
| Igalelo yangoku | 2 mA |
|
ON Umqulutage/yangoku |
Umqulutage: ≥ 15 VDC Okwangoku: ≥ 2 mA |
| CIMA Umqulutage | ≤ I-VDC eyi-5 |
■ Ukusingqongileyo iimeko
| I-Ambient ubushushu 01) | -5 ukuya 70 °C, Ugcino: -25 ukuya 70 °C (akukho mkhenkce okanye ukujiya) |
| I-Ambient ukufuma | 35 ukuya 75%RH (akukho mkhenkce okanye ukujiya) |
| Ukhuseleko ukukala | IP67 (umgangatho we-IEC) |
■ Ukwamkelwa
| Ukwamkelwa |  |
| Umbutho imvume |  |
INxibelelwano yoNxibelelwano
I-Ethernet
| I-Ethernet umgangatho | 100BASE-TX |
| Intambo spec. | I-STP (iShielded Twisted Peir) intambo ye-Ethernet phezu kweKati 5 |
| Ugqithiso izinga | 100 Mbps |
| Ubude bekhebula | 100 m |
| Umgaqo-nkqubo | PROFINET |
| Idilesi izicwangciso | Ukutshintsha kweRotary, i-DCP, i-atIOLink |
| GSDML file | Khuphela i-GSDML file kwiAutonics webindawo. |
IO Link
| Inguqulelo | 1.1 |
| Ugqithiso izinga | COM1 : 4.8 kbps / COM2 : 38.4 kbps / COM3 : 230.4 kbps |
| Izibuko iklasi | Iklasi A |
| Umgangatho | I-IO-Link Interface kunye neNgcaciso yeSistim Version 1.1.2 IO-Link Test Specification Version 1.1.2 |
18, Bansong-ro 5l3Beon-gil, Haeundae-gu, Busan, Republic of Korea, 48002
www.autonics.com Mna +82-2-2048-1577 mna sales@autonics.com
Amaxwebhu / Izibonelelo
 |
I-Autonics ye-ADIO-PN yeeBhokisi zeNgeniso-Iziphumo ezikude [pdf] Incwadi yoMnini I-ADIO-PN yeeBhokisi zeNgeniso-iNgeniso-iRemote, i-ADIO-PN, iibhokisi ze-Remote-Input-Output, iibhokisi ze-Input-Output, iibhokisi zeziphumo, iibhokisi |
