Autonics logo.

Igbe I/O dịpụrụ adịpụ (PROFINET)
ADIO-PN
Akwụkwọ ntuziaka ngwaahịa Igbe Nwepụta Nwepụ Autonics ADIO-PN -

Maka nchekwa gị, gụọ ma soro echiche ndị edere na ntuziaka ntuziaka, akwụkwọ ntuziaka ndị ọzọ na Autonics websaịtị.
Nkọwapụta, akụkụ, wdg nwere ike ịgbanwe na-enweghị ọkwa maka mmelite ngwaahịa. Enwere ike ịkwụsị ụdị ụfọdụ na-enweghị ọkwa.

ọdịnaya zoo
1 Atụmatụ
2 Atụmatụ nchekwa
3 Ozi ịtụ
4 Njikọ
5 Akụkụ
6 Nwụnye
7 Njikọ Port
8 Ihe ngosi
9 Nkọwapụta
10 Akwụkwọ / akụrụngwa
10.1 Ntụaka
11 Ozi ndị metụtara

Atụmatụ

  • Protocol nzikọrịta ozi nke elu: PROFINET
  • Protocol nzikọrịta ozi dị ala: 10-1_41k ver. 1.1 (klaasị ọdụ ụgbọ mmiri: Klas A)
  • Ụlọ m ebe obibi: Nkedo Zinc Die
  • Ogo nchekwa: IP67
  • Chaịnụ daisy na-enye ohere ọkọnọ ike tile site na iji teknụzụ njikọ na njikọ njikọ 7/8”.
  • Ihe nrụpụta kachasị ugbu a nke ọkọnọ ike: 2 A kwa ọdụ ụgbọ mmiri
  • Ntọala ọdụ ụgbọ mmiri I/O na nlekota ọkwa (mkpirisi eriri USB, ọkwa njikọ, wdg)
  • Na-akwado nzacha ntinye dijitalụ

Atụmatụ nchekwa

  • Debe 'Ntụle Nchekwa' niile maka ịrụ ọrụ nchekwa na nke ọma iji zere ihe egwu.
  • ịdọ aka ná ntị 2 akara na-egosi ịkpachara anya n'ihi ọnọdụ pụrụ iche nke ihe egwu nwere ike ime.
    ịdọ aka ná ntị 2 Ịdọ aka ná ntị Ọdịda ịgbaso ntuziaka nwere ike ibute nnukwu mmerụ ahụ ma ọ bụ ọnwụ.
  1. A ga-etinyerịrị ngwaọrụ na-adịghị mma mgbe ị na-eji unit nwere igwe nwere ike ibute nnukwu mmerụ ahụ ma ọ bụ nnukwu mfu akụ na ụba (dịka njikwa ike nuklia, akụrụngwa ahụike, ụgbọ mmiri, ụgbọ ala, ụgbọ oloko, ụgbọ elu, ngwa mgba ọkụ, ngwa nchekwa, mpụ / mgbochi ọdachi. ngwaọrụ, wdg) Ọdịda ịgbaso ntuziaka a nwere ike bute mmerụ ahụ nkeonwe, mfu akụ na ụba ma ọ bụ ọkụ.
  2. Ejila oke iru mmiri, unitcl? te in thetstlplace gt, radiant heat, flammable/explosive/corrosive 'ay('lays nwere ike ịdị ugbu a. Ịghara ịgbaso ntụziaka a nwere ike ịkpata mgbawa ma ọ bụ ọkụ.
  3. Ejikọtala, rụkwaa ma ọ bụ nyochaa unit ahụ mgbe ejikọrọ na isi iyi ike. Ọdịda ịgbaso ntuziaka a nwere ike ibute ọkụ.
  4. Lelee 'njikọ' tupu ịjinye waya. Ọdịda ịgbaso ntuziaka a nwere ike ibute ọkụ.
  5. Akụkọsịla ma ọ bụ gbanwee unit ahụ Ịghara ịgbaso ntuziaka a nwere ike ibute ọkụ.
  6. Emetụla ngwaahịa ahụ aka mgbe ọ na-arụ ọrụ ma ọ bụ ruo oge ụfọdụ ka ịkwụsịchara.
    Ọdịda ịgbaso ntuziaka a nwere ike bute nsogbu.

ịdọ aka ná ntị 2 Ịkpachara anya Ọdịda ịgbaso ntuziaka nwere ike bute mmerụ ahụ ma ọ bụ mmebi ngwaahịa.

  1. Jiri nkeji n'ime nkọwapụta akwadoro. Ọdịda ịgbaso ntuziaka a nwere ike ime ka azụ azụ belata usoro ndụ ngwaahịa ahụ.
  2. Jiri akwa kpọrọ nkụ hichaa otu ahụ, ma ejikwala mmiri ma ọ bụ ihe mgbaze. Ọdịda ịgbaso ntuziaka a nwere ike ibute ọkụ.
  3. Debe ngwaahịa ahụ pụọ na mgbawa igwe, uzuzu na waya nke na-abanye n'ime unit ahụ. Ọdịda ịgbaso ntuziaka a nwere ike bute mmebi ngwaahịa ọkụ.
  4. Jikọọ eriri ahụ nke ọma ma gbochie kọntaktị adịghị mma Ọ bụrụ na ịgbaso ntuziaka a nwere ike ịkpata mmebi ma ọ bụ mmebi ngwaahịa.
  5. Ejikọtala ma ọ bụ bepụ waya nke eriri mgbe ị na-arụ ọrụ otu ahụ, ọ bụrụ na ịgbaso ntuziaka a nwere ike ịkpata mmebi ọkụ ma ọ bụ ngwaahịa.

Ịdọ aka ná ntị n'oge eji

  • Soro ntuziaka dị na 'akpachara anya n'oge eji: Ma ọ bụghị ya, ọ nwere ike ibute ihe mberede na-atụghị anya ya.
  • Ike LA (ike actuator) na ike US (ike sensọ) kwesịrị iji ngwaọrụ ike dịpụrụ adịpụ kpuchie ya.
  • Ekwesịrị ikpo ọkụ ọkụ na oke voltage/ugbu a ma ọ bụ klaasị 2, ngwaọrụ ọkọnọ ike SELV.
  • Jiri eriri ọkọlọtọ na njikọ njikọ. Etinyekwala pogger gabigara ókè mgbe ị na-ejikọ ma ọ bụ na-ewepụ njikọ nke ngwaahịa ahụ.
  • Chebe na elu voltage ahịrị ma ọ bụ ahịrị ọkụ iji gbochie mkpọtụ inductive. Ọ bụrụ na ị na-etinye eriri ọkụ na ahịrị mgbama ntinye nso, jiri akara nzacha orvaristor na ahịrị ọkụ yana waya kpuchiri ekpuchi na mgbama ntinye dị mma. Maka ịrụ ọrụ kwụsiri ike, jiri waya ọta na ferrite core, mgbe ị na-ejikọ waya nkwukọrịta, waya ike ma ọ bụ waya mgbaama.
  • Ejila nso akụrụngwa na-ebute ike ndọta siri ike ma ọ bụ mkpọtụ ugboro ugboro.
  • Ejikọtala, ma ọ bụ wepụ otu a ka ejikọrọ na isi iyi ike.
  • Enwere ike iji nkeji a na gburugburu ndị a.
    - N'ime ụlọ (na ọnọdụ gburugburu ebe obibi dị na 'Nkọwa')
    -Elu max. 2,000m
  • ogo mmetọ 2
    – Ụdị nwụnye II

Nhazi nke ADIO-PN
Ọnụ ọgụgụ dị n'okpuru na-egosi netwọk PROFINET na ngwaọrụ ndị na-ede ya.
Maka iji ngwaahịa ahụ nke ọma, rụtụ aka na akwụkwọ ntuziaka ma jide n'aka na ị ga-agbaso echiche nchekwa na akwụkwọ ntuziaka.
Budata akwụkwọ ntuziaka na Autonics websaịtị.

Igbe ntinye ihe n'ime ime ADIO-PN Autonics - Autonics

Autonics ADIO-PN Igbe ntinye-mpụta ihe dịpụrụ adịpụ - tabile

01) Akụrụngwa atụmatụ atụmatụ nke usoro nkwurịta okwu nke elu nwere ike ịdị iche dabere na gburugburu onye ọrụ.
Maka ozi ndị ọzọ, rụtụ aka na ntuziaka onye nrụpụta.

■ Ihe ndị akwadoro

Ụdị ọrụ steeti nchekwa 01) Nkwado Nchekwa data Ntinye ntinye 01) NJ onye na-ere ahịa NJ ngwaọrụ Oge okirikiri
Ntinye Dijitalụ – – – ○ – – –
Nsonaazụ dijitalụ ○ – – – – – –
Ntinye 10-njikọ – ○ ○ – ○ ○ ○
10-Mpụta njikọ – ○ ○ – ○ ○ ○
10- Ntinye / mmepụta njikọ – ○ ○ – ○ ○ ○

Ozi ịtụ

Nke a bụ naanị maka ntụnye aka, ezigbo ngwaahịa anaghị akwado mkpokọta niile.
Maka ịhọrọ ụdị akọwapụtara, soro Autonics websaịtị.

Igbe ntinye ihe n'ime ime ADIO-PN Autonics - Autonics1

❶ I/O nkọwapụta
N: NPN
P: PNP

Ngwa ngwaahịa

  • Ngwaahịa (+ mkpuchi mkpuchi maka ntụgharị rotary)
  • Efere aha × 20
  • M4 × 10 ịghasa na washer × 1
  • Akwụkwọ ntuziaka × 1
  • Mkpuchi mkpuchi mmiri × 4

rere iche

  • Efere aha
  • mkpuchi mkpuchi mmiri

Ngwa ngwa
Budata nrụnye file na akwụkwọ ntuziaka sitere na Autonics websaịtị.

  • naIOLink
    atIOLink nwere ebumnuche maka ịtọ, nchoputa, mmalite na mmezi nke IO-Link ngwaọrụ site na IODD file Enyere dị ka ngwa ọrụ onfiguration Port na Device (PDCT).

Njikọ

■ ọdụ ụgbọ mmiri Ethernet

M12 (Socket-Nwanyị), D-coded Ntụtụ Ọrụ Nkọwa
Igbe ntinye ntinye aka Autonics ADIO-PN - fig 1 1 TX + Nyefee data +
2 RX + Nweta data +
3 TX - Nyefee data -
4 RX - Nweta data -

■ ọdụ ụgbọ mmiri ọkụ

Mpụga (7/8 ″, oghere- nwanyị) N'ime (7/8 ″, Plug-Nwoke) Ntụtụ Ọrụ Nkọwa
Igbe ntinye ntinye aka Autonics ADIO-PN - fig 2 Igbe ntinye ntinye aka Autonics ADIO-PN - fig 3 1, 2 0 V Ihe mmetụta na onye na-eme ihe
3 FG Ala etiti
4 + 24 VDC Ntinye ihe mmetụta
5 + 24 VDC Onye na-enye ihe nkiri

■ PDCT ọdụ ụgbọ mmiri

i M12 (Socket-Nwanyị), A-koodu Ntụtụ Ọrụ
Igbe ntinye ntinye aka Autonics ADIO-PN - fig 4 1 Ejikọtaghị ya (NC)
2 Data-
3 0 V
4 Ejikọtaghị ya (NC)
5 Data +

■ ọdụ ụgbọ mmiri I/O

M12 (Socket-Nwanyị), A-koodu Ntụtụ Ọrụ
Igbe ntinye ntinye aka Autonics ADIO-PN - fig 14 1 + 24 VDC
2 I/Q: Ntinye dijitalụ
3 0 V
4 C/Q: 10-njikọ, Ntinye/ mmepụta dijitalụ
5 Ejikọtaghị ya (NC)

Akụkụ

  • Nkeji: mm, Maka nkọwa zuru ezu nke ngwaahịa ahụ, soro Autonics websaịtị.

Igbe ntinye ntinye aka Autonics ADIO-PN - fig 6

Nkọwa nke otu

Igbe ntinye ihe n'ime ime ADIO-PN Autonics - Autonics6

01. Oghere ala
02. Oghere mgbago
03. Akụkụ ntinye maka efere aha
04. Ethernet mmiri n'ọdụ ụgbọ mmiri
05. ọdụ ụgbọ mmiri		 06. PDCT ọdụ ụgbọ mmiri
07. I / O ọdụ ụgbọ mmiri
08. Rotary switches
09. Ngosipụta ọnọdụ
10. Ihe ngosi ọdụ ụgbọ mmiri I / O

Nwụnye

■ Ịkwado

  1. Kwadebe mbadamba mbadamba ma ọ bụ ígwè n'ime ogige ahụ.
  2. Gwuo oghere iji bulie ma gwuo ngwaahịa ahụ n'elu.
  3. Gbanyụọ ike niile.
  4. Idozi ngwaahịa ahụ site na iji skru M4 n'ime oghere ndị a na-agbanye.
    Ike ikechichi: 1.5 N m

Igbe ntinye ihe n'ime ime ADIO-PN Autonics - Autonics7

■ Ala ala

ịdọ aka ná ntị 2 Jide n'aka na ị ga-eji eriri nwere obere nkwụsị na dị mkpụmkpụ dịka o kwere mee maka ijikọ ụlọ na ngwaahịa ahụ.

  1. Jikọọ eriri grounding na M4 × 10 ịghasa na washer.
  2. Dozie ịghasa na oghere nke ala.
    Ike ikechichi: 1.2 N m

Igbe ntinye ntinye aka Autonics ADIO-PN - fig 7

Ntọala Aha ngwaọrụ
Iji jikọọ na netwọk PROFINET, hazie interface PROFINET. Enwere ike ịhazi aha ngwaọrụ PROFINET site na iji ụzọ ndị a.

  • Mgbanwe ntụgharị

ịdọ aka ná ntị 2 Jide n'aka na ị ga-etinye akara mkpuchi mkpuchi nke ọma na ntụgharị rotary mgbe ịmechara ntọala.
A naghị ekwe nkwa nchebe mgbe mkpuchi mkpuchi meghere.

Igbe ntinye ntinye aka Autonics ADIO-PN - fig 8

  1. Tụgharịa ntụgharị rotary ka ịtọ aha ngwaọrụ. Ikanam ndụ ndụ nke ihe ngosi US na-enwu.
    Ụdị nhazi Mgbanwe ntụgharị Nkọwa Uru
    Aha ngwaọrụ PROFINET 0 A na-echekwa aha ngwaọrụ a na ADIO-PN's EEPROM.
    Itinye aha ngwaọrụ ahaziri na PROFINET Master ma ọ bụ ngwaọrụ DCP.    		 PROFINET aha ngwaọrụ
    001 ruo 999 Mepụta njikọ nzikọrịta ozi mgbe ịtọlitechara aha ngwaọrụ ADIO-PN. A na-egosipụta uru nke mgba ọkụ rotary n'ikpeazụ nke aha ngwaọrụ. ADIO-PN-MA08A-ILM-
  2. Gbanwuo ADIO-PN ọzọ.
  3. Lelee na akwụkwọ ndụ akwụkwọ ndụ LED nke akara US agbanyere.
  4. Agbanweela aha ngwaọrụ.
  5. Tinye mkpuchi mkpuchi na rotary switches.

■ atIOLink
A na-echekwa aha ngwaọrụ PROFINET site na ngwanrọ atIOLink na ADIO-PN's EEPROM. Maka ozi ndị ọzọ, rụtụ aka na ntuziaka onye ọrụ atIOLink.

Njikọ Port

■ Nkọwa ọdụ ụgbọ mmiri

  • Jide n'aka na ịlele nkọwa ọdụ ụgbọ mmiri dị n'okpuru tupu ijikọ ngwaọrụ ahụ. Kwadebe eriri na-akwado ọkwa nchedo IP67.
ọdụ ụgbọ mmiri Ethernet ọdụ ụgbọ mmiri I/O PDCT ọdụ ụgbọ mmiri ọdụ ụgbọ mmiri ọkụ
Ụdị M12 (Socket-Nwanyị), 4-pin, D-coded M12 (Socket-Nwanyị), 5-pin, A-koodu M12 (Socket-Nwanyị), 5-pin, A-koodu Ntinye: 7/8 ″ (Plug-Nwoke), Nrụpụta 5-pin: 7/8 ″ (Socket-Nwanyị), 5-pin
Push-Pull EE EE EE NA
Ọnụọgụ ọdụ ụgbọ mmiri 2 8 1 2
torque na-agbatị 0.6 N m 0.6 N m 0.6 N m 1.5 N m
Ọrụ akwadoro yinye Daisy USB serial nkwukọrịta yinye Daisy
  • The example of Communication cable maka ọdụ ụgbọ mmiri PDCT
Njikọ 1 Njikọ 2 Wiring
Igbe ntinye ntinye aka Autonics ADIO-PN - fig 9M12 (Nkwụnye-Nwoke), 5-pin Igbe ntinye ntinye aka Autonics ADIO-PN - fig 10Ụdị USB A (Nkwụnye-Nwoke) Autonics ADIO-PN igbe ntinye ihe n'ime ime - tabile 2
  1. Jikọọ na PROFINETIgbe ntinye ntinye aka Autonics ADIO-PN - fig 1101. Jikọọ njikọ M12 na ọdụ ụgbọ mmiri Ethernet. Hụ njikọ dị n'okpuru.Igbe ntinye ntinye aka Autonics ADIO-PN - fig 12
    1 TX + Nyefee data +
    2 RX + Nweta data +
    3 TX - Nyefee data -
    4 RX - Nweta data -

    02. Jikọọ njikọ na netwọk PROFINET.
    • Ngwaọrụ netwọk: PLC ma ọ bụ ngwaọrụ PROFINET na-akwado protocol PROFINET
    03. Tinye ihe mkpuchi mmiri na ọdụ ụgbọ mmiri na-ejighị ya.

  2. Jikọọ ngwaọrụ IO-Link
    ịdọ aka ná ntị 2 Ihe nrụpụta kacha ugbu a bụ 2 A na ọdụ ụgbọ mmiri I/O ọ bụla. Hazie ngwaọrụ ka mkpokọta ọdụ ụgbọ mmiri I/O ghara ịfe 9 A.
    ịdọ aka ná ntị 2 Lelee ozi wiring na akwụkwọ ntuziaka nke ngwaọrụ IO-Link iji jikọọ.Igbe ntinye ntinye aka Autonics ADIO-PN - fig 1301. Jikọọ njikọ M12 na ọdụ ụgbọ mmiri I / O. Hụ njikọ dị n'okpuru.Igbe ntinye ntinye aka Autonics ADIO-PN - fig 16
    1 + 24 VDC
    2 I/Q: Ntinye dijitalụ
    3 0 V
    4 C/Q: 10-njikọ, Ntinye/ mmepụta dijitalụ
    5 Ejikọtaghị ya (NC)

    02. Tinye ihe mkpuchi mmiri na ọdụ ụgbọ mmiri na-ejighị ya.

  3. Jikọọ na atIOLink
    ịdọ aka ná ntị 2 Ejila ọdụ ụgbọ mmiri PDCT na ọdụ ụgbọ mmiri Ethernet n'otu oge.Igbe ntinye ntinye aka Autonics ADIO-PN - fig 1501. Jikọọ njikọ M12 na ọdụ ụgbọ mmiri PDCT. Hụ njikọ dị n'okpuru.
    Igbe ntinye ntinye aka Autonics ADIO-PN - fig 5
    1 Ejikọtaghị ya (NC)
    2 Data -
    3 0 V
    4 Ejikọtaghị ya (NC)
    5 Data +

    02. Jikọọ njikọ na ngwaọrụ netwọk.
    • Ngwaọrụ netwọk: PC/laptop arụnyere atIOLink software
    03. Tinye ihe mkpuchi mmiri na ọdụ ụgbọ mmiri na-ejighị ya.

  4. Jikọọ ọkụ na ADIO
    ịdọ aka ná ntị 2 Jide n'aka na ị gaghị agafe 9 A nke kacha enye ihe mmetụta ugbu a (US).Igbe ntinye ntinye aka Autonics ADIO-PN - fig 1701. Gbanyụọ ike niile.
    02. Jikọọ njikọ 7/8 "na ọdụ ụgbọ mmiri ọkụ. Hụ njikọ dị n'okpuru.

Igbe ntinye ntinye aka Autonics ADIO-PN - fig 18

1, 2 0 V Ihe mmetụta na onye na-eme ihe
3 FG Ala etiti
4 + 24 VDC Ntinye ihe mmetụta
5 + 24 VDC Onye na-enye ihe nkiri

Ihe ngosi

■ Status egosi

Igbe ntinye ntinye aka Autonics ADIO-PN - fig 19

  1. Ike ọkọnọ nke ihe mmetụta
    Ihe ngosi Ikanam agba Ọnọdụ Nkọwa
    US  

    Akwụkwọ ndụ akwụkwọ ndụ

    		 ON etinyere voltage: nkịtị
    Na-egbuke egbuke (1 Hz) Ntọala nke ntụgharị rotary na-agbanwe.
    Uhie Na-egbuke egbuke (1 Hz) etinyere voltage: obere (18 VDC)
  2. Ike ọkọnọ nke actuator
    Ihe ngosi Ikanam agba Ọnọdụ Nkọwa
    UA Akwụkwọ ndụ akwụkwọ ndụ ON etinyere voltage: nkịtị
    Uhie Na-egbuke egbuke (1 Hz) etinyere voltage: obere (18 VDC), Mmehie na rotary switches
    ON etinyere voltage: ọ dịghị (10 VDC)
  3. Mmalite ngwaahịa
    Ihe ngosi Ikanam agba Ọnọdụ Nkọwa
    US, UA Uhie ON ADIO ọdịda mmalite
  4. Ọdịda sistemu
    Ihe ngosi Ikanam agba Ọnọdụ Nkọwa
    SF Uhie Gbanyụọ Enweghị mperi
    ON Oge nkwụsị nke nche, njehie sistemụ
    Na-egbuke egbuke A na-ebute ọrụ mgbama DCP site na bọs.
  5. Ọdịda ụgbọ ala
    Ihe ngosi Ikanam agba Ọnọdụ Nkọwa
    BF Uhie Gbanyụọ Enweghị mperi
    ON Obere ọsọ nke njikọ anụ ahụ ma ọ bụ enweghị njikọ anụ ahụ
    Na-egbuke egbuke Enweghị nnyefe data ma ọ bụ ntọala nhazi
  6. Njikọ Ethernet
    Ihe ngosi Ikanam agba Ọnọdụ Nkọwa
    L/A1 L/A2  

    Akwụkwọ ndụ akwụkwọ ndụ

    		 Gbanyụọ Enweghị njikọ Ethernet
    ON Ewubere njikọ Ethernet.
    Odo Na-egbuke egbuke Nbufe data
  7. Ọnụego nnyefe nke Ethernet
    Ihe ngosi Ikanam agba Ọnọdụ Nkọwa
    100 Akwụkwọ ndụ akwụkwọ ndụ ON Ọnụ ego mbufe: 100Mbps

■ Ihe ngosi ọdụ ụgbọ mmiri I/O

Igbe ntinye ntinye aka Autonics ADIO-PN - fig 20

  1. Pin 4 (C/Q)
    Ihe ngosi Ikanam agba Ọnọdụ Nkọwa
    0  

    Odo

    		 Gbanyụọ DI/ME: pin 4 Gbanyụọ
    ON DI/DO: pin 4 ON
     

    Akwụkwọ ndụ akwụkwọ ndụ

    		 ON Nhazi ọdụ ụgbọ mmiri: IO-Link
    Na-egbuke egbuke (1 Hz) Nhazi ọdụ ụgbọ mmiri: IO-Link, Enweghị ngwaọrụ IO-Link achọtara
    Uhie Na-egbuke egbuke (2 Hz) Njehie nhazi IO-Link
    • Nkwado dara, Ogologo data ezighi ezi, mperi Nchekwa data
    ON • NPN: Obere sekit mere na ntinye nke pin 4 na pin 1
    • PNP: Obere sekit mere na ntinye nke pin 4 na pin 3
  2. Pin 2 (I/Q)
    Ihe ngosi Ikanam agba Ọnọdụ Nkọwa
    1 Odo Gbanyụọ DI: pin 2 Gbanyụọ
    ON DI: pin 2 ON
  3. Ike ọkọnọ nke ọdụ ụgbọ mmiri I/O
    Ihe ngosi Ikanam agba Ọnọdụ Nkọwa
    0,1 Uhie Na-egbuke egbuke (1 Hz) Obere sekit mere na ike ọkọnọ I/O (pin 1, 3)

Nkọwapụta

■ Nkọwapụta ọkụ eletrik/Mechanical

Nkwanye voltage 18 - 30 VDC
Enyere aha voltage 24 VDC
Ugbu a oriri 2.4 W (≤ 216 W)
Na-enye ugbu a kwa ọdụ ụgbọ mmiri ≤2 ọdụ ụgbọ mmiri
Sensọ ugbu a (US) ≤ 9 A
Akụkụ W 66 × H 215 × D 38 mm
Ihe onwunwe Ihe nkedo Zinc Die
Ethernet ọdụ ụgbọ mmiri M12 (Socket-Nwanyị), 4-pin, D-coded, Push-Pull Number nke ọdụ ụgbọ mmiri: 2 (IN/Ọpụpụ)
Ọrụ akwadoro: yinye daisy
ọdụ ụgbọ mmiri ọkụ Ntinye: 7/8 "(Plug-Male), 5-pin mmepụta: 7/8" (Socket-Female), 5-pin Ọnụ ọgụgụ ọdụ ụgbọ mmiri: 2 (IN / OUT) Ọrụ akwadoro: yinye daisy
PDCT ọdụ ụgbọ mmiri M12 (Socket-Nwanyị), 5-pin, A-koodu, Push-Pull Ọnụọgụ ọdụ ụgbọ mmiri: 1
Usoro njikọ: USB serial Communication
I/O ọdụ ụgbọ mmiri M12 (Socket-Nwanyị), 5-pin, A-koodu, Push-Pull Ọnụọgụ ọdụ ụgbọ mmiri: 8
Ịkwanye usoro Oghere nkwụnye: edozi ya na m4 skru
Nda ala usoro Oghere ala: edozi ya na m4 skru
Nkeji ibu (akwakọrọ) ≈ 700g (≈ 900 g)

■ Ụdị nkọwapụta

Ụdị Ntinye Dijitalụ
Nọmba of ọwa 16-CH (I/Q: 8-CH, C/Q:8-CH)
I/O common NPN/PNP
Ntinye ugbu a 5 mA
ON voltage/ugbu a Voltage: ≥ 15 VDC Ugbu a: ≥5mA
Gbanyụọ voltage ≤ 5 VDC

■ Ụdị nkọwapụta

Ụdị Nsonaazụ dijitalụ
Nọmba of ọwa 8-CH (C/Q)
I/O common NPN/PNP
Ike ọkọnọ 24 VDC (18-30 VDC ), Max. 300mA
Nhapu ugbu a ≤0.1 mA
Mwepu voltage ≤ 1.5 VDC
Nkenke sekit nchebe EE

■ Ụdị nkọwapụta

Ụdị IO-njikọ
Ntinye ugbu a 2 mA
 

ON voltage/ugbu a

 Voltage: ≥ 15 VDC Ugbu a: ≥2mA
Gbanyụọ voltage ≤ 5 VDC

■ gburugburu ebe obibi ọnọdụ

Ambient okpomọkụ 01) -5 ruo 70 Celsius, Nchekwa: -25 ruo 70 Celsius (enweghị oyi ma ọ bụ condensation)
Ambient iru mmiri 35 ruo 75% RH (enweghị friza ma ọ bụ condensation)
Nchedo ogo IP67 (IEC ọkọlọtọ)

■ Nkwado

Nkwenye Igbe ntinye ihe n'ime ime ADIO-PN Autonics - icon0
Njikọ nkwado Autonics ADIO-PN igbe ntinye ihe n'ime ime - akara ngosi 01

Interface nkwurịta okwu

Ethernet

Ethernet ọkọlọtọ 100BASE-TX
USB nkọwa. STP (Shielded Twisted Pair) Ethernet cable over Cat 5
Mbufe ọnụego 100 Mbps
Ogologo eriri USB 100 m
Protocol PROFINET
Adreesị ntọala Rotary switches, DCP, atIOLink
GSDML file Budata GSDML file na Autonics websaịtị.

IO-njikọ

Ụdị 1.1
Mbufe ọnụego COM1 : 4.8 kbps / COM2: 38.4 kbps / COM3 : 230.4 kbps
Port klas Klas A
Ọkọlọtọ IO-Link Interface na ụdị nkọwapụta sistemụ 1.1.2 Ụdị nkọwapụta ule IO-njikọ 1.1.2

18, Bansong-ro 5l3Beon-gil, Haeundae-gu, Busan, Republic of Korea, 48002
www.autonics.com I +82-2-2048-1577 I sales@autonics.com

Autonics ADIO-PN Igbe ntinye ihe n'ime ime - akara ngosi

Akwụkwọ / akụrụngwa

Igbe ntinye-mpụta akpaghị aka ADIO-PN [pdf] Akwụkwọ ntuziaka onye nwe
ADIO-PN igbe ntinye ihe n'ime ime, ADIO-PN, igbe ntinye aka, igbe ntinye ihe, igbe ihe, igbe, igbe.

Ntụaka

Ozi ndị metụtara

Hapụ ikwu

Agaghị ebipụta adreesị ozi-e gị. Akara mpaghara achọrọ akara *