ozobot Bit Plus Programmable Neeg Hlau Phau Ntawv Qhia

Ua raws li cov lus qhia hauv lub ntim rau kev txuas rau koj lub computer.
Xaiv qhov chaw nres nkoj tsim nyog rau cov khoom hauv Cov Cuab Yeej -> Chaw nres nkoj -> *** (Ozobot Bit +).

Upload koj qhov program los ntawm nias Sketch -> Upload (Ctrl + U).

Rov qab ua haujlwm tawm ntawm lub thawv

Nkag mus rau https://www.ozoblockly.com/editor.
Xaiv Bit + neeg hlau nyob rau sab laug vaj huam sib luag.

Tsim lossis thauj ib qho program los ntawm examples panel.
Txuas Bit + rau lub computer ntawm USB cable.

Nyem Txuas thiab tom qab ntawd Load los kho cov khoom lag luam firmware.

Calibrating koj Ozobot

Kos lub voj voog dub me ntsis loj dua koj lub bot thiab tso Bit + rau nws.
Nias thiab tuav lub Go Button rau 3 vib nas this kom txog rau thaum lub sab saum toj LED flashes dawb, ces tso.

Bit + yuav txav mus sab nraum lub voj voog thiab ntsais ntsuab thaum ntsuas ntsuas. Rov pib dua yog tias nws ntsais liab.

Thaum twg kom Calibrate

Calibration yog qhov tseem ceeb thaum hloov qhov chaw lossis hom tshuaj ntsuam los txhim kho qhov tseeb hauv cov lej thiab kab nyeem. Yog xav paub ntxiv, mus saib ozobot.com/support/calibration.

Taw qhia rau Ozobot

Sab laug View

Txoj cai View

LED Teeb
Circuit Board
Roj teeb / Program
Txiav-Off Switch
Mus khawm
Flex Cable
Tsav
Lub log
Sensor Board

Luam theej duab QR code kom nkag mus rau Arduino IDE cov ntaub ntawv ua lus Askiv. Ua raws li cov lus qhia nyob ntawd yam tsis tau ua qhov ntsuas ntsuas - calibration tsis yog thawj kauj ruam.

Phau Ntawv Qhia Pib Ceev

Download tau thiab nruab qhov tseeb version ntawm Arduino® IDE.

Download tau thiab nruab qhov tseeb version ntawm Arduino® IDE. Arduino IDE version 2.0 thiab tom qab tau txais kev txhawb nqa.
Thov nco ntsoov: cov kauj ruam yuav tsis ua haujlwm nrog Arduino® version qub dua 2.0.
Nco tseg: Yog tias Arduino software download txuas tsis ua haujlwm, koj tuaj yeem tshawb nrhiav siv Google lossis lwm lub tshuab tshawb nrhiav. Tsuas yog ntaus "Arduino IDE download" thiab koj yuav pom qhov tseeb version muaj rau koj lub cuab yeej.

Hauv Arduino® IDE software

File -> Preferences -> Tus Thawj Saib Xyuas Haujlwm Ntxiv URLs:
- Luam thiab muab tso rau hauv qab no
  URL: https://static.ozobot.com/arduino/package_ozobot_index.json

Cov cuab yeej -> Board -> Boards Manager
Nrhiav rau “Ozobot”
Nruab "Ozobot Arduino® Robots" pob

Compile thiab load example program rau Ozobot Bit+

Cov cuab yeej -> Board -> Ozobot Arduino® robots
Xaiv "Ozobot Bit +"

File -> Examples -> Ozobot Bit+ -> 1. Basics -> OzobotBitPlusBlink
Txuas cov khoom mus rau USB chaw nres nkoj ntawm lub computer siv lub USB cable muab rau hauv lub ntim
Cov cuab yeej -> Chaw nres nkoj -> *** (Ozobot ntsis +)
- (Xaiv qhov chaw nres nkoj tsim nyog ntawm cov khoom lag luam. Yog tias tsis paub meej, sim txhua yam muaj nyob rau ib ntus kom txog thaum ib qho ua tiav.)
Sketch -> Upload (Ctrl + U)
Ozobot yuav tawm tag nrho nws cov LED tso tawm hauv ib nrab-ob ntus. Lub Bit + tsis muaj peev xwm ua lwm yam haujlwm kom txog thaum sib txawv Sketch lossis firmware default yog uploaded.

Kev teeb tsa

Txhim kho 3rd Party Arduino® Boards rau Arduino® IDE

Qhov ntau yam thiab lub zog ntawm Arduino® los ntawm qhov tseeb tias nws yog qhov qhib. Vim qhov xwm txheej ntawm qhov chaw qhib ecosystems koj tuaj yeem tsim koj tus kheej Arduino "-raws li cov laug cam thiab ua cov tsev qiv ntawv code kom mus nrog lawv.ample lub tsev qiv ntawv ntawm Arduino® sketches los pab koj kawm lawv cov haujlwm, qhov tsis tu ncua, thiab kev siv lus.

Ua ntej, koj yuav tsum nrhiav qhov txuas board pob. Qhov txuas yuav taw tes rau qhov no yuav tuaj rau hauv daim ntawv ntawm json file. Rau Ozobot Bit + Arduino® pob, qhov txuas yog https://static.ozobot.com/arduino/package_ozobot_index.json. Qhib Arduino IDE thiab ntaus 'Ctrl +, (tswj thiab comma) yog tias koj nyob hauv PC thiab Linux. Yog tias koj siv Mac, nws yuav yog 'Command + ,.

Koj yuav tau txais tos nrog ib tug version ntawm no screen:
Hauv qab ntawm lub qhov rais, koj yuav pom ib qho kev xaiv ntxiv 'Additional board manager URLs', Koj tuaj yeem tshaj tawm json txuas rau ntawd lossis nyem lub cim nrog ob lub thawv me me ntxiv rau ntau lub rooj tsavxwm rau koj tus thawj tswj hwm ntawm ib zaug. Koj tsuas yog yuav tsum ntaus nkag / rov qab tom qab koj tso qhov txuas rau hauv lub thawv kom pib kab tshiab.
Koj tuaj yeem ntxiv Ozobot Bit + ntxiv board nrog qhov txuas no: https://static.ozobot.com/arduino/package_ozobot index.json

Thaum koj tau tshaj tawm koj cov ntawv txuas hauv lub thawv ntaus OK thiab tawm ntawm cov ntawv qhia nyiam.
Tam sim no koj tuaj yeem nyem rau ntawm qhov kev xaiv thib ob ntawm sab bar, nws yog lub rooj tsav xwm me me uas yuav qhib cov ntawv qhia zaub mov board. Tam sim no koj tuaj yeem nyem "Nruab" kom tau txais txhua qhov tsim nyog files rau kev pab cuam nrog koj lub rooj tsavxwm, qhov no Ozobot Bit +.
Koj tseem tuaj yeem nyem rau ntawm "Tools" ntawm cov ntawv qhia zaub mov nyob rau sab saum toj thiab nrhiav Tus Thawj Saib Xyuas Haujlwm hauv "Board:" sub-menu. Los yog los ntawm kev ntaus 'CtrI + Shift + B' ntawm Windows thiab Linux ('Command + Shift + B' ntawm Mac).

Tom qab koj tau nruab lub files rau koj lub rooj tsavxwm Arduino®, rov pib koj lub software kom paub tseeb tias Arduino® paub txog txhua yam. files koj nyuam qhuav ntsia.
Tom ntej no koj yuav xav nyem qhov poob rau saum koj lub qhov rais thiab xaiv lub rooj tsavxwm koj xav tau thiab qhov chaw nres nkoj nws tau ntsaws rau hauv koj lub computer:
Hauv qhov no peb xaiv Ozobot Bit + ntawm COM4 virtual serial chaw nres nkoj. Yog tias koj lub rooj tsavxwm tsis tshwm sim hauv daim ntawv no, nyem rau ntawm "Xaiv lwm lub rooj tsavxwm thiab kev xaiv chaw nres nkoj":

Koj tuaj yeem tshawb nrhiav koj lub rooj tsavxwm los ntawm kev ntaus ntawv hauv lub npov sab saum toj, raws li koj tuaj yeem pom peb tau tshawb nrhiav 'ozobot' thiab xaiv Ozobot Bit + Board txuas nrog COM4, nyem OK.
Mus saib cov example sketches muaj rau koj lub rooj tsavxwm tshiab nyem rau ntawm "File” ces hover dua “examples” thiab koj yuav pom cov ntawv qhia zaub mov uas muaj tus qauv Arduino® examples, ua raws li tag nrho cov examples los ntawm cov tsev qiv ntawv uas koj lub Rooj Tswjhwm Saib tau sib haum nrog. Raws li koj tuaj yeem pom, peb tau suav nrog qee qhov hloov kho ntawm qee tus qauv Arduino® examples thiab ntxiv qee qhov kev cai, hauv "6.

Ib yam li yooj yim li ntawd, koj tau nruab qhov kev txhawb nqa files rau koj lub rooj tsavxwm thiab npaj txhij los pib tshawb nrhiav qhov chaw tshiab hauv ntiaj teb ntawm Arduino.

Rov qab "tawm-ntawm-lub thawv" Bit + functionality Loading Arduino® sketch rau Bit + neeg hlau yuav overwrite lub "Tshuag" firmware. Qhov ntawd txhais tau hais tias tus neeg hlau yuav ua rau Arduino® firmware thiab tsis muaj peev xwm ntawm "Ozobot" ua haujlwm li niaj zaus, xws li cov kab hauv qab no thiab kuaj cov lej xim. Tus cwj pwm qub tuaj yeem rov qab tau los ntawm kev thauj khoom "Tshuag" firmware rov qab mus rau Bit + chav tsev uas tau teeb tsa yav dhau los nrog Arduino IDE. Txhawm rau thauj khoom firmware, siv Ozobot Blockly:

Nkag mus rau https://www.ozoblockly.com/editor
Nco ntsoov xaiv "Bit +" neeg hlau nyob rau sab laug vaj huam sib luag

Tsim ib qho kev pab cuam, lossis thauj ib qho kev pab cuam los ntawm "examples” vaj huam sib luag ntawm sab xis.
Nyob rau sab xis, nyem rau ntawm "Programs" icon, yog li lub vaj huam sib luag txoj cai qhib
Nco ntsoov tias Bit + txuas nrog lub computer ntawm USB cable

Nyem qhov "Connect" khawm
Nyem qhov "Load" khawm.
Lub Bit + Tshuag firmware yuav raug thauj mus rau cov neeg hlau, ua ke nrog Blockly program (tsis tseem ceeb, raws li peb tau ua qhov kev tawm dag zog no los thauj cov Tshuag FW thawj qhov chaw)

Battery Cutoff Switch

Muaj ib tug swb mus rau sab ntawm tus neeg hlau uas yuav tig lub neeg hlau tawm. Qhov no yog qhov tshwj xeeb tshaj yog tias koj thauj khoom Arduino® program uas ua qee qhov rov ua dua, tab sis tsis tuaj yeem ncua nws tus kheej. Lub swb hloov yuav ib txwm nres qhov kev pab cuam thaum nws disconnects lub roj teeb. Txawm li cas los xij, thaum txuas nrog lub charger, lub roj teeb yuav ib txwm pib them thiab Arduino® kos duab yuav khiav, txawm tias txoj haujlwm ntawm tus swb.

Kuv Yuav Calibrate li cas?

Kauj ruam 1

Kos lub voj voog dub, me ntsis loj dua koj lub bot. Sau nrog Dub Marker Qhov Chaw Ntsis + ntawm nws.

Kauj ruam 2

Nias thiab tuav lub ntsis + Mus khawm rau 3 vib nas this (los yog kom txog thaum nws sab saum toj LED flashes dawb), ces tso.

Kauj ruam 3

Ntsis + yuav txav mus sab nraum lub voj voog, thiab ntsais ntsuab thaum ntsuas ntsuas. Yog tias Bit + blinks liab, pib dua los ntawm Kauj Ruam 1.

Thaum twg thiaj Calibrate?

Calibration pab txhim kho Bit + code thiab kab nyeem qhov tseeb. Nws yog ib qho tseem ceeb rau calibrate thaum koj hloov qhov chaw lossis hom tshuaj ntsuam.

Thaum tsis ntseeg, calibrate!

Yog xav paub ntxiv txog yuav ua li cas thiab thaum twg los ntsuas, thov mus rau ozobot.com/support/calibration

Bot Labels

Nrhiav bot cov lus qhia txog kev tswj hwm chav kawm ntawm support@ozobot.com

FAQ

Q: Kuv yuav ntsuas kuv Ozobot li cas?
- A: Txhawm rau calibrate koj Ozobot, ua raws li cov kauj ruam no:
  - Kauj ruam 1: Kos lub voj voog dub me ntsis loj dua koj lub bot thiab tso Bit + rau nws.
  - Kauj ruam 2: Nias thiab tuav lub Go Button rau 3 vib nas this kom txog rau thaum lub sab saum toj LED flashes dawb, ces tso.
  - Kauj ruam 3: Bit + yuav txav mus sab nraum lub voj voog thiab ntsais ntsuab thaum ntsuas ntsuas. Rov pib dua yog tias nws ntsais liab.
Q: Vim li cas calibration tseem ceeb?
- A: Calibration pab txhim kho cov lej thiab kab nyeem kom raug, tshwj xeeb tshaj yog thaum hloov chaw lossis hom tshuaj ntsuam. Nws raug nquahu kom calibrate thaum twg tsis paub meej.

Cov ntaub ntawv / Cov ntaub ntawv

ozobot Bit Plus Programmable neeg hlau [ua pdf] Cov neeg siv phau ntawv qhia
Bit Plus Programmable Robot, Bit Plus, Programmable Robot, Neeg Hlau

Cov ntaub ntawv

Cov neeg siv phau ntawv

ozobot Bit Plus Programmable neeg hlau

Cov lus qhia siv khoom