Fargo G2 thiab Koda User Manual
www.linortek.comRau Fargo G2, Koda
TCP/IP Web Raws li Relay Controller
Rov C 04/2022

Fargo G2 TCP/IP Web Raws li Relay Controller

Ua tsaug rau kev yuav Linortek Fargo G2 lossis Koda TCP / IP Controller. Muaj ntau yam khoom siv uas tuaj yeem tswj tau los ntawm FARGO / KODA Web Relay Controller. FARGO/KODA Web Cov maub los siv tau rau hauv cov ntawv thov xws li (tab sis tsis txwv rau): Teeb, kev ruaj ntseg, lub tshuab nqus dej, kev tswj xyuas, cov khoom siv hauv tsev, lub tsev automation, HVAC, thiab ntau ntxiv. Thov xa mus rau Pawg Thawj Saib Xyuas Kev Ruaj Ntseg ntawm nplooj ntawv 29 rau kev tawm tswv yim thiab tso tawm cov ntsiab lus ntawm koj tus maub los kom paub tseeb tias lawv tsim nyog rau koj cov kev xav tau.

Phau ntawv no npog:

• FARGO R8 G2
• FARGO R4DI G2
• FARGO R4ADI G2
• KODA 100
• TSI 200

Cov no yuav raug xa mus rau SERVER hereafter. Thaum muaj qhov sib txawv lossis cov yam ntxwv ntxiv lawv yuav raug sau tseg hauv cov ntawv nyeem.
Rau cov yeeb yaj kiab qhia, FAQ's thiab cov ntaub ntawv tiv tauj rau peb pab pawg txhawb nqa, thov mus saib: https://www.linortek.com/technical-support

LINORTEK IB-YEAR LIMITED Warranty

Consumer law: Rau cov neeg tau txais kev pab uas raug them los ntawm cov cai lij choj tiv thaiv neeg siv khoom lossis cov kev cai hauv lawv lub tebchaws nyob ("Consumer Law"), cov txiaj ntsig tau muab hauv Linortek Ib Xyoo Txwv Warranty ("Linortek Limited Warranty") yog ntxiv rau thiab tsis hloov cov cai muab los ntawm Consumer Law thiab nws tsis suav nrog, txwv lossis ncua koj txoj cai los ntawm Consumer Law. Koj yuav tsum sab laj nrog cov tub ceev xwm tsim nyog hauv koj lub teb chaws nyob rau cov ntaub ntawv ntxiv txog cov cai no
Linortek cov kev lav phib xaub rau cov khoom siv kho vajtse no ("Cov Khoom") raug txwv rau cov lus teev tseg hauv qab no:
Linor Technology, Inc. ("Linortek") lav cov khoom no tiv thaiv qhov tsis xws luag hauv cov ntaub ntawv thiab kev ua haujlwm rau ib lub sijhawm ntawm IB (1) xyoo txij li hnub ntawm cov khw muag khoom los ntawm tus neeg siv khoom kawg ("Lub Sijhawm Warranty") thaum siv raws li cov lus qhia ua haujlwm. Daim ntawv luam ntawm daim ntawv txais nyiaj yuav tsum tau ua pov thawj ntawm kev yuav khoom. Yog tias muaj teeb meem kho vajtse tshwm sim thiab qhov kev thov raug lees paub tau txais nyob rau hauv Lub Sijhawm Warranty, ntawm nws qhov kev xaiv thiab raws li txoj cai tau tso cai, Linortek yuav yog (1) kho cov khoom siv kho vajtse tsis raug them nqi, siv cov khoom hloov tshiab lossis hloov kho tshiab, (2) pauv cov khoom lag luam nrog cov khoom tshiab lossis uas tau tsim los ntawm cov khoom siv tshiab lossis cov khoom siv ua haujlwm tsawg kawg nkaus (cov khoom siv los yog cov khoom siv tsawg kawg nkaus) thiab yog qhov zoo tshaj plaws. refund tus nqi yuav khoom ntawm cov khoom. Thaum muab nyiaj rov qab, cov khoom lag luam uas muab cov nyiaj rov qab yuav tsum tau xa rov qab mus rau Linortek thiab dhau los ua Linortek cov cuab yeej.
Qhov kev lees paub yav dhau los yog nyob ntawm Tus Neeg Yuav Khoom (i) sau ntawv thov kom sai thiab (ii) muab sijhawm rau Linortek ntawm lub sijhawm los tshuaj xyuas thiab kuaj cov khoom lees paub tias muaj kev puas tsuaj. Cov kev soj ntsuam zoo li no tuaj yeem nyob ntawm Tus Neeg Yuav Khoom thiab / lossis Linortek tuaj yeem thov kom rov qab cov khoom ntawm tus neeg yuav khoom tus nqi. Txawm li cas los xij, Linortek yuav tsis muaj lub luag haujlwm rau kev ntim khoom, tshuaj xyuas, lossis cov nqi ua haujlwm nrog rau kev xa khoom rov qab. Tsis muaj cov khoom lag luam yuav raug lees txais rau qhov kev pab cuam lav uas tsis nrog los ntawm Daim Ntawv Tso Cai Xa Khoom Rov Qab (RMA#) los ntawm Linortek.
EXCLUSIONS THIAB LIMITATIONS
Qhov Kev Txiav Txim Siab no tsis suav nrog kev puas tsuaj los ntawm kev tsim txom, kev siv tsis raug, kev tsis saib xyuas, hluav taws lossis lwm yam ua rau sab nraud, kev sib tsoo, kev hloov kho, kev kho lossis lwm yam ua rau tsis muaj qhov tsis xws ntawm cov khoom thiab kev ua haujlwm. Software faib los ntawm Linortek nrog lossis tsis muaj Linortek hom npe suav nrog, tab sis tsis txwv rau kev kaw lus software ("Software") tsis muaj nyob rau hauv qhov Kev Tiv Thaiv Txwv Tsis Pub. Koj qhov kev siv thiab cov cai cuam tshuam nrog Software yog tswj hwm los ntawm Linortek End User License Daim ntawv cog lus uas koj tuaj yeem pom ntawm no: https://www.linortek.com/end-user-licenseagreement/. Linortek tsis yog lub luag haujlwm rau kev puas tsuaj tshwm sim los ntawm kev tsis ua raws li cov lus qhia ntsig txog cov khoom siv. Txhawm rau kom ua raws li cov kev txwv kev ua haujlwm, Tus Neeg yuav khoom yuav tsum xa mus rau phau ntawv qhia [muab nrog cov khoom]. Cov roj teeb tsis suav nrog hauv Warranty.
Raws li qhov siab tshaj plaws tau tso cai, qhov kev txwv txwv no thiab cov kev kho mob uas tau teev tseg saum toj no yog qhov tshwj xeeb thiab nyob rau hauv lwm qhov kev lav phib xaub, kev kho, thiab cov xwm txheej, thiab cov kev cai tshwj xeeb , suav nrog tiam sis tsis txwv rau, kev lav phib xaub ntawm kev muag khoom, FITNESS FOR A PARTICULAR PURPOSE, non-INFRINGEMENT. TAM SIM NO THIAJ LI YUAV TSUM TAU TXAIS KEV PAB CUAM, tag nrho cov kev lav phib xaub zoo li no yuav tsum, txog qhov uas tau tso cai los ntawm txoj cai lij choj, raug txwv nyob rau lub sijhawm mus txog lub sijhawm ntawm LINORTEK LIMITED ROV QAB ROV QAB, KEV PAB CUAM TSHIAB Lossis rov qab tau raws li tau txiav txim los ntawm LINORTEK NTAWM NWS TSEEM CEEB. QHOV TSEEB (Lub teb chaws thiab lub xeev) tsis tso cai txwv rau ntev npaum li cas qhov kev lav phib xaub lossis qhov xwm txheej yuav kav ntev, yog li cov kev txwv uas tau piav qhia saum toj no yuav tsis siv rau koj. Qhov kev lav phib xaub no muab cov cai tshwj xeeb rau koj, thiab koj tuaj yeem muaj lwm txoj cai uas txawv ntawm lub xeev mus rau lub xeev (lossis los ntawm lub tebchaws lossis lub xeev). Qhov kev txwv txwv no yog tswj hwm los ntawm thiab tsim qauv raws li txoj cai ntawm United States.
Tsis lees paub

1. Nyeem Cov Lus Qhia - Nyeem tag nrho cov lus qhia kev nyab xeeb thiab kev khiav hauj lwm ua ntej ua haujlwm ntawm cov khoom.
2. Khaws Cov Lus Qhia - Khaws cov lus qhia kev nyab xeeb thiab kev ua haujlwm rau yav tom ntej siv.
3. Ua raws li cov lus ceeb toom - Ua raws li tag nrho cov lus ceeb toom ntawm cov khoom thiab hauv cov lus qhia ua haujlwm.
4. Ua raws li cov lus qhia - Ua raws li txhua yam kev khiav hauj lwm thiab siv cov lus qhia.
5. Ntxuav - Tshem cov khoom tawm ntawm lub hwj chim ua ntej ntxuav. Tsis txhob siv cov tshuaj ntxuav kua los yog tshuaj aerosol. Siv adamp daim ntaub los ntxuav lub qhov rooj nkaus xwb.
6. Cov ntawv txuas - Tsis txhob siv cov ntawv txuas tshwj tsis yog lawv tau pom zoo tshwj xeeb los ntawm Linortek. Kev siv cov ntaub ntawv tsis sib xws lossis lwm yam tsis zoo yuav ua rau muaj kev phom sij.
7. Accessories - Tsis txhob muab cov khoom no tso rau ntawm qhov chaw tsis ruaj khov, lub koob yees duab, lub khawm, lossis lub mount. Cov khoom yuav poob, ua rau raug mob loj rau ib tug neeg thiab kev puas tsuaj loj rau cov khoom. Siv tsuas yog nrog ib qho chaw muag khoom, tripod, bracket, lossis mount pom zoo los ntawm cov chaw tsim khoom, lossis muag nrog cov khoom. Ua raws li cov chaw tsim khoom cov lus qhia thaum mounting cov khoom, thiab tsuas yog siv mounting accessories pom zoo los ntawm cov chaw tsim tshuaj paus. Ceev faj thaum siv cov khoom siv thiab lub laub ua ke. Kev nres ceev, quab yuam ntau dhau, thiab qhov chaw tsis sib xws tuaj yeem ua rau cov khoom siv thiab lub laub sib xyaw ua ke.
8.  Qhov cua nkag - Kev qhib rau hauv lub thawv, yog tias muaj, yog muab rau qhov cua thiab kom ntseeg tau tias cov khoom lag luam txhim khu kev qha thiab tiv thaiv nws los ntawm overheating. Tsis txhob thaiv lossis npog cov qhov qhib. Tsis txhob muab cov khoom no tso rau hauv ib qho kev teeb tsa tshwj tsis yog muab qhov cua kom zoo lossis Linortek cov lus qhia tau ua raws.
9. Lub Hwj Chim Muaj Peev Xwm - Ua haujlwm cov khoom no tsuas yog los ntawm hom fais fab uas tau teev tseg hauv phau ntawv qhia lossis ntawm daim ntawv lo.
   Yog tias koj tsis paub meej txog hom khoom siv hluav taws xob uas koj npaj yuav siv, sab laj nrog koj tus neeg muag khoom lossis lub tuam txhab hluav taws xob hauv zos - yog tias kev siv cov khoom siv hluav taws xob uas tsis yog qhia hauv phau ntawv qhia lossis daim ntawv cim yuav tsis muaj qhov lav. Rau cov khoom tsim los ua haujlwm ntawm lub roj teeb lub zog, lossis lwm qhov chaw, xa mus rau cov lus qhia ua haujlwm [suav nrog cov khoom].
10. Grounding los yog Polarization - Cov khoom no tej zaum yuav nruab nrog ib tug polarized alternating-tam sim no kab plug (ib tug plug muaj ib tug hniav dav dua lwm yam). Cov ntsaws no yuav haum rau hauv lub qhov hluav taws xob nkaus xwb ib txoj kev. Qhov no yog ib qho kev nyab xeeb. Yog tias koj tsis tuaj yeem ntxig lub ntsaws rau hauv lub qhov hluav taws xob, sim thim rov qab lub ntsaws. Yog tias lub ntsaws tseem tsis haum nws yog vim tias koj lub qhov hluav taws xob tsis sib haum nrog lub ntsaws. Hu rau koj tus kws kho hluav taws xob los hloov koj lub qhov hluav taws xob nrog ib qho uas sib xws. Tsis txhob yuam lub ntsaws kom haum rau hauv lub qhov hluav taws xob tsis sib xws lossis sim ua kom lub hom phiaj kev nyab xeeb ntawm lub ntsaws. Hloov pauv, cov khoom no tuaj yeem nruab nrog 3-xaim grounding-type plug, lub ntsaws nrog peb tus pin (grounding) pin. Lub plug no tsuas yog haum rau hauv av-hom hluav taws xob qhov hluav taws xob. Qhov no yog ib qho kev nyab xeeb. Tsis txhob yuam lub ntsaws kom haum rau hauv lub qhov hluav taws xob tsis sib xws lossis sim ua kom lub hom phiaj kev nyab xeeb ntawm lub ntsaws. Yog tias koj lub qhov hluav taws xob tsis sib haum nrog lub ntsaws, tiv tauj koj tus kws kho hluav taws xob los hloov koj lub qhov hluav taws xob nrog ib qho uas sib haum.
11. Kev Tiv Thaiv Hluav Taws Xob - Txoj hauv kev siv cov hlua hluav taws xob kom lawv tsis tuaj yeem taug kev lossis rub los ntawm cov khoom tso rau lossis tawm tsam lawv, ua tib zoo saib xyuas cov hlua thiab cov ntsaws ruaj ruaj, cov khoom siv yooj yim, thiab qhov chaw uas cov hlua tawm ntawm cov khoom siv. .
12.  Cov kab hluav taws xob - Tsis txhob tso lub kaw lus sab nraum zoov nyob qhov twg hauv ib puag ncig ntawm cov kab hluav taws xob hluav taws xob lossis lwm lub teeb hluav taws xob lossis lub zog hluav taws xob, lossis qhov chaw uas nws tuaj yeem poob rau hauv cov kab hluav taws xob lossis cov kab hluav taws xob. Thaum txhim kho lub kaw lus sab nraum zoov, siv kev saib xyuas hnyav kom tsis txhob kov cov kab hluav taws xob lossis cov kab hluav taws xob vim tias kev sib cuag nrog lawv yuav ua rau tuag taus.
13. Overloading - Tsis txhob tshaj qhov hluav taws xob thiab txuas txuas ntxiv vim qhov no tuaj yeem ua rau hluav taws kub lossis hluav taws xob poob.
14. Yam khoom thiab kua nkag - Tsis txhob thawb cov khoom ntawm txhua yam rau hauv cov khoom no los ntawm kev qhib vim lawv tuaj yeem kov cov phom sij txaus ntshaitage cov ntsiab lus lossis qhov luv luv uas tuaj yeem ua rau hluav taws kub lossis hluav taws xob poob siab. Tsis txhob nchuav kua ntawm txhua yam ntawm cov khoom.
15.  Kev Pabcuam - Tsis txhob sim ua haujlwm rau cov khoom no koj tus kheej vim tias qhib lossis tshem cov npog yuav ua rau koj muaj kev phom sij.tage lossis lwm yam kev phom sij. Xa tag nrho cov kev pabcuam ntawm cov khoom rau Linortek.
16. Kev Puas Tsuaj Rau Kev Pabcuam - Tshem tawm cov khoom ntawm lub qhov hluav taws xob thiab xa mus rau Linortek Cov Neeg Siv Khoom Pabcuam raws li cov hauv qab no:
    ib. Thaum lub hwj chim-siv qaum los yog plug puas lawm.
    b. Yog tias cov kua tau nchuav, lossis cov khoom tau poob rau ntawm cov khoom.
    c. Yog tias cov khoom lag luam tau nthuav tawm los nag lossis dej.
    d. Yog tias cov khoom lag luam tsis ua haujlwm ib txwm ua raws li cov lus qhia ua haujlwm [nrog rau cov khoom lag luam]. Kho tsuas yog cov kev tswj hwm uas tau them los ntawm cov lus qhia ua haujlwm, vim tias kev hloov kho tsis raug ntawm lwm yam kev tswj yuav ua rau muaj kev puas tsuaj thiab feem ntau yuav xav tau kev ua haujlwm ntau los ntawm tus kws tshaj lij uas tsim nyog los kho cov khoom kom zoo li qub.
    e. Yog tias cov khoom lag luam poob lawm lossis cov txee raug mob lawm.
    f. Yog tias cov khoom muaj qhov txawv txav ntawm kev ua haujlwm.
17. Hloov Cov Khoom Siv - Yog tias xav tau cov khoom hloov pauv, muaj qhov Tsawg-Voltage Hluav taws xob hloov lawv siv tsuas yog ib feem teev los ntawm cov chaw tsim khoom. Kev hloov pauv tsis tau tso cai yuav ua rau muaj hluav taws kub, hluav taws xob poob lossis lwm yam kev phom sij. Hloov qhov chaw tuaj yeem nrhiav tau ntawm https://www.linortek.com/store/
18. Kev Ntsuam Xyuas Kev Nyab Xeeb - Thaum ua tiav cov kev pabcuam lossis kho cov khoom no, nug tus kws tshaj lij kev pabcuam ua haujlwm kuaj xyuas kev nyab xeeb los txiav txim siab tias cov khoom nyob rau hauv kev ua haujlwm zoo.
19.  Coax Grounding - Yog tias cov kab hluav taws xob sab nraud txuas nrog cov khoom lag luam, nco ntsoov tias cov kab hluav taws xob yog hauv av. Teb chaws As Mes Lis Kas qauv nkaus xwb – Tshooj 810 ntawm National Electrical Code, ANSI/NFPA No.70-1981, muab cov ntaub ntawv hais txog kev ncaj ncees grounding ntawm lub mount thiab txhawb cov qauv, grounding ntawm coax mus rau ib tug paug cov khoom, qhov loj ntawm grounding conductors, qhov chaw ntawm cov khoom tawm, kev sib txuas rau grounding electrodes, thiab cov kev xav tau rau cov khoom siv hauv av electrode.
20.  xob laim - Rau kev tiv thaiv ntxiv ntawm cov khoom no thaum muaj cua daj cua dub, lossis ua ntej tawm hauv nws tsis tuaj yeem siv thiab tsis siv rau lub sijhawm ntev, tshem tawm ntawm phab ntsa qhov hluav taws xob thiab tshem tawm cov kab hluav taws xob. Qhov no yuav tiv thaiv kev puas tsuaj rau cov khoom vim hluav taws xob thiab hluav taws xob-kab surges.
21.  Kev siv sab nraum zoov - Cov khoom no tsis muaj dej tsis zoo thiab yuav tsum tsis txhob tso dej ntub. Tsis txhob tso dej los nag lossis lwm yam kua.
    Tsis txhob tawm sab nraum qhov rooj thaum hmo ntuj vim tias muaj qhov sib xyaw ua ke tuaj yeem tshwm sim.
22.  Thaum hloov roj teeb, fuses lossis tuav cov khoom lag luam qib siab yuav tsum ceev faj ntawm cov hluav taws xob hluav taws xob uas tuaj yeem ua rau cov khoom siv hluav taws xob puas. Nws yog qhov zoo tshaj plaws los siv cov khoom siv hluav taws xob hauv pem teb. Yog tias qhov no tsis muaj, koj tuaj yeem tso koj tus kheej los ntawm kev kov cov khoom siv hlau lossis cov yeeb nkab. Thaum hloov cov roj teeb lossis cov fuses tsis txhob kov i) cov xov hlau uas tsis yog cov xov tooj ntawm tes thiab ii) lub rooj tsav xwm luam tawm.

LIMITATION OF LIABILITY
YUAV TSUM TAU TXAIS LINOR TECHNOLOGY yuav tsum lav, txawm hais tias nyob hauv kev cog lus, kev tsim txom, lossis lwm yam, rau ib qho xwm txheej, tshwj xeeb, tsis ncaj ncees, cuam tshuam lossis raug nplua, suav nrog, TAB SIS TSIS TXAUS SIAB, TSIS TXAUS SIAB, PUAS YOG LUB SIJHAWM, INCONVENIENCE, COMMERCIAL LOSS, LOS YOG POV THAWJ, TXAUS SIAB, LOS YOG NYIAJ NYIAJ LOS NTAWM LUB SIJ HAWM UAS YUAV TSUM TAU TXAIS KEV RUAJ NTSEG. DISCLAIMER rau daim ntawv thov tseem ceeb
Cov khoom no tsis yog npaj los yog tso cai rau cov khoom txhawb nqa lub neej lossis rau lwm yam kev siv uas qhov kev ua tsis tiav tuaj yeem ua rau tus kheej raug mob lossis tuag. Yog tias koj lossis koj cov neeg siv khoom siv lossis tso cai siv cov khoom no rau kev siv yam tsis xav tau lossis tsis raug tso cai, koj pom zoo kom them nyiaj rau Linor Technology thiab nws cov koom tes, thiab cov tub ceev xwm, cov neeg ua haujlwm thiab cov neeg faib khoom ntawm txhua tus, los ntawm txhua qhov kev lav phib xaub ntsig txog kev siv, suav nrog tus kws lij choj cov nqi thiab cov nqi.
NTAUB NTAWV NTAUB NTAWV RAU LWM TUS
Tshwj tsis yog tau hais tshwj xeeb, peb cov khoom tsis yog tsim los hloov kab voltage (110V thiab siab dua) cov khoom siv. Txhawm rau tswj cov cuab yeej ua haujlwm ntawm kab voltages ib tug tsim nyog hluav taws xob yuav tsum tau nruab ib lub intermediary ntaus ntawv xws li ib tug relay. Thaum xaiv cov khoom siv los tswj, nws yog qhov zoo tshaj los xaiv cov voltage tswj xws li 24VAC solenoid rau dej ntws tswj. Tsuas yog cov kws tshaj lij hluav taws xob tsim nyog tuaj yeem xa cov kab voltage ntaus ntawv. Tsis tas li ntawd, cov lis dej num hauv zos yuav tsum tau ua raws li suav nrog tab sis tsis txwv rau cov kab ntsuas loj thiab cov vaj tsev tsim nyog. Linortek tsis muaj lub luag haujlwm rau kev puas tsuaj rau cov neeg siv lossis cov neeg thib peb rau kev siv peb cov khoom tsis raug. Qhov kev lav no tseem nyob nrog tus neeg siv. Linortek tsis muaj lub luag haujlwm rau kev puas tsuaj rau lub cuab yeej vim yog siv peb cov khoom siv tsis raug.
RELAY VOLTAGE SPECIFICATIONS
Thov siv ceev faj thaum txuas cov khoom siv hluav taws xob los yog lwm yam khoom siv. Qhov no web maub los tsis yog tsim los txuas rau ib qho voltage ntau dua 48V. Siv qhov kev npaj no, yuav tsum tso cai rau koj kom tswj tau txhua yam. Nws yog ib qho tseem ceeb uas koj siv cov kws kho hluav taws xob muaj ntawv tso cai thiab ua raws li cov cai hluav taws xob uas siv tau rau koj qhov chaw nyob. Cov lej no muaj nyob rau koj txoj kev nyab xeeb, nrog rau kev nyab xeeb ntawm lwm tus. Linortek tsis muaj lub luag haujlwm rau kev puas tsuaj lossis kev puas tsuaj uas tshwm sim los ntawm qhov tsis ua raws li cov cai hauv zos, kab ke lossis cov kev cai lossis tsis ua raws li cov lus qhia tshwj xeeb rau kev teeb tsa thiab kev siv khoom.

Daim Ntawv Pom Zoo Daim Ntawv Tso Cai Kawg rau Linortek Software thiab Cov Ntaub Ntawv

Daim Ntawv Pom Zoo Daim Ntawv Tso Cai Kawg No ("EULA") yog daim ntawv cog lus raws cai ntawm koj (ib tus neeg lossis ib lub koom haum) thiab Linor Technology, Inc. ("Linortek" lossis "peb" lossis "peb") uas tswj hwm koj kev siv software thiab cov ntaub ntawv ("Software") kos los yog txuam nrog Fargo, Koda, Netbell, IoTMeter, thiab iTrixx series ntawm cov khoom ("Linortek Products").
Qhov no EULA tsis tswj hwm koj kev siv Linortek website lossis Linortek Cov Khoom (tsis suav nrog Software). Koj siv Linortek webqhov chaw yog tswj hwm los ntawm Linortek website cov ntsiab lus ntawm kev pabcuam thiab Linortek txoj cai ntiag tug uas tuaj yeem nrhiav tau ntawm:
http://www.linortek.com/terms-and-conditions [Koj qhov kev yuav khoom ntawm Linortek Cov Khoom (tsis suav nrog Software) yog tswj hwm los ntawm Linortek txwv warranty, uas tuaj yeem nrhiav tau ntawm https://www.linortek.com/linortek-one-year-limited-warranty/
Qhov no EULA tswj hwm koj txoj kev nkag mus thiab siv Software. Qhov EULA no muab cov cai lij choj tshwj xeeb rau koj, thiab koj tuaj yeem muaj lwm yam kev cai lij choj ntxiv, uas txawv ntawm txoj cai mus rau kev txiav txim. Cov kev tsis lees paub, kev cais tawm, thiab cov kev txwv ntawm kev lav ris hauv qab
EULA no yuav tsis siv rau qhov txwv lossis txwv los ntawm txoj cai lij choj. Qee qhov kev txiav txim siab tsis tso cai rau kev cais tawm ntawm kev lees paub lossis kev cais lossis kev txwv tsis pub muaj kev puas tsuaj lossis lwm yam cai, yog li cov kev cai ntawm EULA no yuav tsis siv rau koj.
Los ntawm kev txhim kho, nkag mus, luam tawm thiab / lossis siv Software lossis cov ntaub ntawv koj pom zoo yuav raug khi los ntawm cov lus thiab cov xwm txheej ntawm EULA no sawv cev ntawm koj tus kheej lossis lub koomhaum uas koj sawv cev rau kev txuas nrog xws li kev teeb tsa, nkag mus, luam tawm thiab / lossis siv. Koj sawv cev thiab lees paub tias (i) koj muaj txoj cai, txoj cai, thiab muaj peev xwm lees txais thiab pom zoo rau cov nqe lus ntawm EULA no sawv cev ntawm koj tus kheej lossis lub koom haum koj sawv cev (ii) koj muaj hnub nyoog txaus cai hauv koj qhov chaw nyob. , (iii) koj tsis nyob hauv ib lub teb chaws uas raug rau US Government embargo, los yog uas tau raug xaiv los ntawm US tsoom fwv raws li ib tug "neeg ua phem pab txhawb" lub teb chaws; thiab (ii) koj tsis tau teev nyob rau hauv ib daim ntawv teev npe ntawm Tsoom Fwv Teb Chaws Asmeskas txwv tsis pub tog twg los yog txwv.
Yog tias koj tsis xav kom raug khi los ntawm cov nqe lus ntawm EULA no koj yuav tsis nruab, nkag mus, luam lossis siv Software hauv txhua txoj kev (txawm tias tsis tau teeb tsa ua ntej ntawm lub cuab yeej koj tau yuav).

1. Tso cai siv Software / Software License.
   Raws li cov nqe lus ntawm EULA no, Linortek muab rau koj txwv, tshem tawm, tsis suav nrog, tsis yog sublicensable, tsis hloov txoj cai thiab daim ntawv tso cai rau (a) rub tawm, nruab thiab ua tiav ib daim qauv ntawm Software, hauv daim foos ua tiav cov khoom siv. nkaus xwb, tsuas yog ntawm Linortek Cov Khoom Muag uas koj muaj lossis tswj hwm thiab (b) siv Software nkaus xwb nrog rau Linortek Khoom raws li nws qhov kev npaj siv raws li tau piav qhia hauv Linortek website (txhua qhov ntawm 1(a) thiab 1(b) ib qho "Tswj Tso Cai" thiab sib sau ua ke "Kev Tso Cai Siv").
2. Kev txwv ntawm Koj Kev Siv Software.
   Koj pom zoo tsis ua, thiab tsis tso cai rau lwm tus, siv Software rau lwm lub hom phiaj uas tsis yog Kev Tso Cai Siv tau piav qhia hauv Tshooj 1 saum toj no. Qhov no txhais tau tias, ntawm lwm yam, koj yuav tsis:
   (a) hloov kho, hloov kho, hloov kho, hloov kho, txhais lus, ua cov khoom siv los ntawm, disassemble, thim rov qab engineer lossis thim rov qab sau ib feem ntawm Software (tshwj tsis yog raws li txoj cai lij choj tshwj xeeb txwv tsis pub muaj kev txwv rau kev sib koom ua haujlwm, qhov twg koj pom zoo thawj zaug hu rau Linortek thiab muab sijhawm rau Linortek los tsim cov kev hloov pauv raws li qhov xav tau rau kev sib koom ua haujlwm);
   (b) daim ntawv tso cai, muab, faib, xa tawm, muag, xauj, tswv tsev, outsource, nthuav tawm lossis lwm yam siv Software rau kev lag luam lossis ua Software rau lwm tus neeg sab nrauv;
   (c) tso cai rau ib tus neeg thib peb siv Software sawv cev lossis rau qhov txiaj ntsig ntawm lwm tus neeg sab nrauv;
   (d) siv ib feem ntawm Software ntawm ib lub cuab yeej lossis lub computer uas tsis yog Linortek Cov Khoom uas koj muaj lossis tswj;
   (e) siv lub Software nyob rau hauv txhua txoj kev uas ua txhaum cai nyob rau hauv lub zos, lub teb chaws los yog thoob ntiaj teb txoj cai; los yog
   (f) tshem tawm lossis hloov cov ntawv cim, cim, cov lus dab neeg lossis cov ntawv ceeb toom muaj tswv, suav nrog tab sis tsis txwv rau ib qho kev cai lij choj, cim lag luam, logo hauv Software. Koj tsis tuaj yeem nthuav tawm cov txiaj ntsig ntawm kev ua tau zoo lossis kev ntsuas kev ua haujlwm ntawm ib qho ntawm Software rau lwm tus neeg sab nrauv yam tsis tau sau ntawv tso cai ua ntej ntawm Linortek rau txhua qhov kev tso tawm.
3. Hloov tshiab.
   Linortek tuaj yeem tsim kho tshiab, hloov kho tshiab, thaj ua rau thaj, kho kab laum thiab lwm yam kev hloov kho ("Hloov kho") txhawm rau txhim kho kev ua haujlwm ntawm Software. Tsuas yog raws li tau muab rau hauv Linortek website, Cov Hloov Kho Tshiab yuav muab rau koj dawb xwb. Cov Kev Hloov Kho tshiab no tuaj yeem raug teeb tsa yam tsis tau ceeb toom rau koj. Los ntawm kev siv lub Software, koj kuj tso cai rau kev hloov kho tsis siv neeg. Yog tias koj tsis pom zoo rau qhov no koj yuav tsis nruab, nkag mus, luam lossis siv Software hauv txhua txoj kev.
4. Cov tswv cuab.
   Lub software muaj ntawv tso cai rau koj thiab tsis muag. Linortek tuav tag nrho cov cai rau Software thiab ib qho Kev Hloov Kho Tshiab uas tsis tau tso cai hauv no. Cov Software thiab Linortek Cov Khoom lag luam muaj kev tiv thaiv los ntawm kev cai lij choj, kev lag luam thiab lwm yam kev cai lij choj thiab kev cai lij choj. Linortek thiab nws cov ntawv tso cai muaj lub npe, kev cai lij choj, cov cim lag luam thiab lwm cov cai muaj tswv yim hauv Software.
   Koj tsis tau tso cai rau Linortek cov cim lag luam lossis cov cim kev pabcuam. Tsis muaj daim ntawv tso cai implied hauv EULA no.
5. Kev txiav txim.
   Qhov EULA no siv tau txij li hnub koj thawj zaug siv Software thiab yuav txuas ntxiv mus ntev npaum li koj muaj Linortek Cov Khoom lag luam cuam tshuam nrog nws lossis txog thaum koj lossis Linortek txiav tawm qhov kev pom zoo hauv nqe lus no. Koj tuaj yeem txiav tawm EULA no txhua lub sijhawm raws li sau ntawv ceeb toom rau Linortek ntawm qhov chaw nyob hauv qab no. Linortek tuaj yeem txiav tawm EULA no txhua lub sijhawm yog tias koj tsis ua raws li ib qho ntawm cov nqe lus hauv daim ntawv cog lus no. Daim ntawv tso cai tso rau hauv EULA no yuav xaus tam sim ntawd thaum daim ntawv cog lus xaus. Thaum txiav tawm, koj yuav tsum tsis txhob siv Linortek Cov Khoom Muag thiab Cov Software thiab koj yuav tsum rho tawm tag nrho cov ntawv luam ntawm cov khoom siv.
   Software. Cov nqe lus ntawm Tshooj 2 tseem yuav siv tau tom qab qhov kev pom zoo xaus.
6.  Warranty Disclaimer.
   TSEEM CEEB raws li txoj cai lij choj siv tau, LINORTEK muab cov software "raws li yog" thiab tsis lees paub txhua qhov kev lav phib xaub thiab cov xwm txheej, txawm hais tias nthuav tawm, hais qhia, lossis kev cai, suav nrog cov khoom lag luam, kev lav phib xaub TSEEM CEEB NTAWM LUB SIJ HAWM NTAWM LUB TSEV KAWM NTAWV, TSEV KAWM NTAWV, QHOV TSEEB, thiab tsis ua txhaum cai ntawm peb tog. LINORTEK tsis tau lees paub cov txiaj ntsig tshwj xeeb los ntawm kev siv SOFTWARE. LINORTEK tsis muaj kev lav phib xaub tias SOFTWARE yuav tsis muaj kev cuam tshuam, tsis muaj kab mob lossis lwm yam kev phom sij, raws sijhawm, ruaj ntseg, lossis tsis muaj qhov yuam kev. Koj siv cov software thiab cov khoom LINORTEK ntawm koj tus kheej qhov kev txiav txim siab thiab pheej hmoo. KOJ YUAV TSUM TAU TXAIS LUB SIJ HAWM (Thiab LINORTEK tsis lees paub) Txhua yam thiab txhua yam kev poob, kev lav phib xaub, lossis kev puas tsuaj uas tshwm sim los ntawm koj siv SOFTWARE
   THIAB LINORTEK PRODUCT.
7. Kev Cai Liability.
   Tsis muaj dab tsi hauv EULA no thiab tshwj xeeb hauv tsab xov xwm "Limitation of Liability" no yuav tsum sim tshem tawm kev lav phib xaub uas tsis tuaj yeem raug cais tawm raws li txoj cai lij choj.
   TXOJ HAUJ LWM NTAWM TXOJ HAUJ LWM NTAWM TXOJ HAUJ LWM NTAWM TXOJ CAI NTAWM TXOJ CAI NTAWM TXOJ HAUJ LWM, Ntxiv rau cov lus ceeb toom saum toj saud, tsis muaj qhov xwm txheej twg yuav (A) LINORTEK yuav raug lees paub rau txhua qhov txiaj ntsig, piv txwv, qhov tsis txaus ntseeg, tshwj xeeb, Los ntawm lossis cuam tshuam rau cov khoom lossis cov software, txawm tias LINORTEK paub lossis yuav tsum tau paub txog qhov muaj peev xwm ntawm kev puas tsuaj, thiab (B) LINORTEK TAG NRHO COV LIAB CEEV NTAWM KEV PAB CUAM NTAWM LUB ROOJ HAUJ LWM, THIAB YUAV TSUM TAU TXAIS RAU IB TUG NTAU NTAU NTAU NTAU NTAU NTAU NTAU NTAU NTAU NTAU NTAU NTAU NTAU NTAU LI NTAUB NTAWV RAU LINORTEK thiab LINORTEK'S TSO CAI DISTRIBUTOR lossis Tus Neeg Sawv Cev Muag Khoom rau Cov Khoom Muag lossis Cov Kev Pabcuam (6). TXOJ CAI NTAWM LUB SIJ HAWM THIAB YUAV TSUM TAU TXAIS KEV PAB CUAM NTAWM LUB SIJ HAWM NTAWM LUB SIJ HAWM NTAWM LUB SIJ HAWM. LINORTEK tsis lees paub txhua yam kev lav phib xaub ntawm txhua yam ntawm LINORTEK cov ntawv tso cai thiab cov khoom siv.
8. Ua raws li cov cai ntawm Export.
   Koj lees paub tias Software thiab lwm yam thev naus laus zis muaj feem cuam tshuam nrog US cov cai tswj kev xa tawm US export jurisdiction thiab tej zaum yuav raug rau export los yog ntshuam kev cai nyob rau hauv lwm lub teb chaws. Koj pom zoo ua raws li tag nrho cov kev cai lij choj thoob ntiaj teb thiab lub teb chaws thiab cov kev cai uas siv rau Software, suav nrog US Export Administration Regulations nrog rau cov neeg siv khoom kawg, kev siv kawg, thiab cov kev txwv qhov chaw tawm los ntawm US thiab lwm lub tseem fwv. Koj lees paub tias koj muaj lub luag haujlwm kom tau txais kev tso cai rau kev xa tawm, rov xa tawm, lossis xa cov software thiab cov cuab yeej cuam tshuam, raws li xav tau.
   Koj yuav them nyiaj thiab tuav Linortek tsis muaj kev phom sij los ntawm txhua qhov kev thov, kev poob, kev lav phib xaub, kev puas tsuaj, kev nplua, kev nplua, cov nqi thiab cov nuj nqis (xws li tus kws lij choj tus nqi) uas tshwm sim los ntawm lossis cuam tshuam txog kev ua txhaum cai los ntawm koj ntawm koj lub luag haujlwm hauv nqe lus no.
9. Txoj hauj lwm.
   Koj tsis tuaj yeem muab koj cov cai lossis kev lav phib xaub raws li EULA no, thiab txhua qhov kev sim ua haujlwm yuav tsis muaj dab tsi thiab tsis muaj txiaj ntsig.
10. Daim ntawv ceeb toom.
    Linortek tuaj yeem muab cov ntawv ceeb toom rau koj cuam tshuam nrog EULA no siv email thiab chaw nyob uas koj muab thaum koj sau npe nrog Linortek.
11. Kev zam
    Yuav kom ua tau zoo, ib qho thiab tag nrho cov kev zam los ntawm Linortek ntawm no yuav tsum sau ntawv thiab kos npe los ntawm tus neeg sawv cev Linortek tso cai. Lwm qhov kev ua tsis tiav ntawm Linortek los tswj cov ntsiab lus ntawm no yuav tsis suav tias yog kev zam.
12.  Mob hnyav.
    Ib qho kev qhia ntawm EULA no uas pom tias tsis tuaj yeem siv tau yuav raug kho thiab txhais kom ua tiav cov hom phiaj ntawm cov kev cai ntawd kom muaj txiaj ntsig zoo tshaj plaws raws li txoj cai lij choj siv tau thiab tag nrho cov kev cai tseem ceeb yuav nyob twj ywm thiab siv tau.
13. Txoj Cai Tswjfwm; Qhov chaw.
    Koj pom zoo tias EULA no, thiab ib qho kev thov, kev tsis sib haum xeeb, kev nqis tes ua, kev ua, qhov teeb meem, lossis kev thov kev pab cuam uas tshwm sim los ntawm lossis cuam tshuam nrog EULA no, yuav raug tswj hwm los ntawm txoj cai lij choj ntawm lub xeev North Carolina, Tebchaws Asmeskas, tsis hais txog kev tsis sib haum xeeb ntawm txoj cai lij choj, yog tias koj nyob hauv ib lub tebchaws uas yuav tsis siv US txoj cai lij choj rau kev tsis sib haum xeeb txog cov nqe lus no, ces txoj cai ntawm koj lub teb chaws yuav siv. Koj kuj pom zoo tias United Nations Convention on Contracts for the International Muag Khoom yuav tsum tsis txhob
    thov. Koj pom zoo tias tsis hais txog kev cai lij choj lossis kev cai lij choj rau qhov tsis sib xws, txhua qhov ua rau kev txiav txim tawm tsam peb tshwm sim los ntawm lossis cuam tshuam nrog Linortek webqhov chaw, Software lossis Linortek Cov Khoom yuav tsum pib ua ntej ib (1) xyoo tom qab qhov ua rau muaj kev cuam tshuam los yog qhov ua rau ntawm qhov kev txiav txim yuav raug txwv mus tas li. Ib qho kev nqis tes ua lossis kev txiav txim siab hais txog EULA no yuav tsum raug coj mus rau hauv tsoomfwv lossis lub xeev lub tsev hais plaub nyob hauv Raleigh, North Carolina thiab txhua tus neeg tuaj yeem thim rov qab mus rau qhov chaw txiav txim plaub ntug thiab qhov chaw ntawm ib lub tsev hais plaub hauv ib qho kev thov lossis kev tsis sib haum xeeb, tshwj tsis yog tias Linortek yuav nrhiav kev tsis txaus siab. nyem rau hauv ib lub tsev hais plaub uas muaj kev txiav txim siab los tiv thaiv nws cov cuab yeej cuab tam.
14. California Proposition 65 Ceeb Toom.
    CEEB TOOM: Cov khoom no tuaj yeem ua rau koj muaj tshuaj lom neeg xws li txhuas, uas paub txog lub Xeev California ua rau mob qog noj ntshav. Yog xav paub ntxiv, mus rau ntawm www.P65Warnings.ca.gov.

Pib pib

Lub Fargo SERVER yog qhov hu ua "cov khoom lag luam liab qab" thiab muab khoom tsis muaj vaj tse. Nws ua haujlwm ntawm qis voltage; txawm li cas los xij koj yuav tsum tau siv kev ceev faj yooj yim los tiv thaiv kev puas tsuaj rau lub voj voog. Tag nrho cov khoom siv hluav taws xob muaj kev cuam tshuam rau electrostatic paug. This high voltage "kev poob siab" tuaj yeem ua rau koj lub cuab yeej puas tas mus li. Ua ntej tuav cov khoom, koj yuav tsum kov ib qho chaw xws li lub rooj zaum hauv av lossis rooj. Nws kuj yog qhov zoo tshaj plaws los tuav lub cuab yeej los ntawm nws cov npoo. Yog tias koj pom tias koj lub rooj zaum lossis khaub ncaws feem ntau ua rau muaj qhov tsis zoo, koj yuav tsum tau ceev faj ntxiv. Lub tsev yog muab nrog plaub roj hmab taw uas ua rau hauv qab ntawm lub rooj tsavxwm los ntawm kev sib cuag nrog qhov chaw koj muab tso rau. Ceev faj kom tsis txhob cia cov khoom siv hlau, xws li cov ntsia hlau tsav tsheb lossis cov khoom siv kho vajtse, tuaj yeem tiv nrog hauv qab ntawm cov khoom no. Lub rooj tsavxwm tuaj yeem ntsia tau rau ntawm lub vaj huam sib luag siv cov khoom muag thiab # 4 kho vajtse. Lub qhov mounting yog txuas nrog GROUND teeb liab. SERVER unit yog tus kheej muaj web server configured nrog ntau yam input thiab output circuits. Txawm hais tias cov relays raug ntsuas rau siab dua voltages, cov khoom no tsis yog tsim los siv ntawm kab voltages. Koj yuav tsum tsis txhob siv voltages los ntawm SERVER khoom tshaj 48 volts. TSIS ZOO.
KODA SERVER yog ib lub tsev nyob nrog DIN rail mountable enclosure uas tuaj yeem rub mus rau DIN rail lossis txuas rau txhua qhov chaw tiaj tus xws li phab ntsa lossis hauv qab txee. KODA 100 muaj ob lub relays (48VAC@1A), KODA 200 muaj plaub relays uas tuaj yeem tsav 10V 50mA rau cov khoom siv sab nraud. Chav tsev yog muab nrog DIN Rail mountable enclosure nrog tshem tau cov davhlau ya nyob twg txuas rau kev yooj yim installation. KODA SERVER tuaj yeem ntsia tau rau ntawm lub vaj huam sib luag lossis ntawm phab ntsa siv DIN rail mount clip. Cov hlau txuas txuas tau tshem tau yooj yim ua rau thaj chaw teeb tsa thiab tso cai rau kev daws teeb meem yooj yim thiab txij nkawm: chav tsev tuaj yeem raug tshem tawm ntawm qhov system yam tsis muaj kev cuam tshuam cov kab hluav taws xob.

Txuas lub Server
Nco tseg: Rau daim duab qhia qhov chaw ntawm tag nrho cov connectors ntawm koj SERVER hais txog hauv seem no, thov mus saib hauv seem - Board Layout Reference.
Ceev faj: Cov units no yog nyob rau hauv av cais. Ib txwm txuas kom lub voj voog fais fab tsuas yog txuas nrog SERVER unit.
Tsis txhob siv kev sib txuas hauv av sab nraud. Ua li no tuaj yeem ua rau SERVER lossis POE cov cuab yeej tsim khoom puas.

1. Muab cov khoom tso rau ntawm lub rooj lossis lub rooj zaum kom ceev faj kom tsis txhob cia cov khoom siv hlau nkag mus rau hauv qab ntawm lub rooj tsavxwm Circuit Court (Fargo nkaus xwb).
2. Txuas lub 12VDC fais fab mov mus rau lub qhov hluav taws xob tsim nyog AC thiab ntsaws lub chim txuas rau hauv SERVER ntawm qhov chaw sau npe "12VDC / POWER". Xwb, koj tuaj yeem siv POE. Lub sijhawm no lub GREEN / Boot LED yuav tsum tuaj thiab pib flashing qhia tias SERVER tab tom ua haujlwm thiab nyob hauv "Bootload Mode". Hom no tso cai rau tus neeg siv hloov kho cov software server uas siv rau hauv chav tsev. Tom qab kwv yees li 5 vib nas this, GREEN LED yuav tawm mus thiab RED LED yuav pib ntsais ib zaug ib pliag qhia tias SERVER ua haujlwm hauv "Server Mode" thiab nkag mus rau hauv lub network siv TCP / IP raws tu qauv.
   CEEB TOOM: Thaum koj siv POE NETWORK SWITCH, Tsis txhob siv lub 12VDC fais fab mov los ua lub zog rau lub server tib lub sijhawm, nws yuav ua rau lub board puas.
3. Txuas lub Ethernet cable rau hauv RJ45 / NET connector. Lub "Kev Sib Txuas" LED yuav los rau yog tias muaj 100MHz network, txwv tsis pub nws yuav nyob twj ywm thiab "Kev Ua Haujlwm" LED yuav tsum pib blinking qhia txog kev ua haujlwm hauv network. Fargo G2 Relay txuas
   Muaj 8 relays ntawm FARGO R8 thiab 4 ntawm FARGO R4. Cov no yog cov kev sib cuag qhuav. Cov chav no yog tsim los rau cov voltage tswj thiab yuav tsum tsis txhob muaj voltage siv rau cov relay ntau dua 48 volts. Qhov no yog rau koj txoj kev nyab xeeb nrog rau nyob rau hauv qhov tsis sib xws ntawm cov khoom thiab Circuit Board tsim. Cov relays muaj 3 terminals sau tias TSIS TAU, C thiab NC uas sawv cev rau Nquag Qhib, Feem ntau thiab Nquag kaw. Thaum qhib, lub relay txav kev sib txuas ntawm CNC mus rau CNO. Yog tias koj xav ua kom muaj kev sib txuas thaum lub relay qhib, txuas koj cov xov hlau ntawm C thiab NO. Thaum lub relay qhib C thiab NO yuav txuas ua ke. Yog tias koj xav tawg lub voj voog thaum lub relay qhib, ua rau koj cov kev sib txuas rau C thiab NC. Thaum lub relay qhib, lub Circuit Court yuav tawg (los yog qhib)
   Koda Relay txuas
   Muaj 2 relays ntawm KODA 100. Lub KODA 100 muaj 2 tshem tau 2 txoj hauj lwm txuas (1 rau txhua tus relay) thiab tsuas yog suav "1" thiab "2". Cov relays no nquag qhib.
   Muaj 4 relays ntawm KODA 200. Lub KODA 200 muaj 1 tshem tau 8 txoj hauj lwm connector. Txhua relay muaj qhov kev sib txuas "+" thiab kev sib txuas ntawm tus lej. Cov relays yuav raug teem kom muab txog 10VDC los ntawm kev xaiv "+V" ntawm qhov chaw hloov chaw (saib Board Layout Reference nplooj ntawv 29) lossis teem rau qhuav hu rau DC ntawm qhov hloov. Yog tias "+V" raug xaiv ces lub voltage yuav muaj nyob rau ntawm lub davhlau ya nyob twg "+" thiab cov lej lej yog qhov rov qab los. Txwv tsis pub, ib txwm qhib kev sib cuag qhuav muaj nyob thoob plaws "+" thiab cov lej sib txuas. KODA 100/200 yog tsim los tsuas yog qis voltage tswj thiab yuav tsum tsis txhob muaj voltage siv rau cov relay ntau dua 48 volts. Qhov no yog rau koj txoj kev nyab xeeb thiab nyob rau hauv qhov tsis sib xws ntawm cov khoom thiab Circuit Board tsim.

YUAV TSUM TAU TXAIS LINOR TECHNOLOGY yuav tsum lav, txawm hais tias nyob hauv kev sib cog lus, kev tsim txom, lossis lwm yam, rau ib qho xwm txheej, tshwj xeeb, tsis ncaj ncees, cuam tshuam lossis raug nplua, suav nrog, TABSIS, TSIS TXAUS SIAB, TSIS TXAUS SIAB, TSIS TXAUS SIAB , COMMERCIAL POSS , LOS YOG PUAS PAUB TIAS , TXOJ CAI , LOSSIS REVENUES NTAWM LUB SIJ HAWM UAS YUAV TSUM TAU TXAIS KEV PAB CUAM .

NTAUB NTAWV NTAUB NTAWV RAU LWM TUS
Tshwj tsis yog hais tshwj xeeb, cov khoom no TSIS tsim los hloov kab voltage cov khoom siv. Qhov kev txwv no suav nrog tag nrho cov khoom ntawm FARGO thiab KODA. Txhawm rau tswj cov cuab yeej ua haujlwm ntawm kab voltages tus neeg siv yuav tsum tau nruab thiab intermediary ntaus ntawv xws li ib tug relay.
Thaum txuas ib kab voltage cov cuab yeej siv cov cuab yeej nruab nrab, koj YUAV TSUM yog tus kws tshaj lij hluav taws xob tsim nyog lossis siv cov kev pabcuam ntawm tus kws tshaj lij hluav taws xob tsim nyog. Tsis tas li ntawd, cov lej hauv zos yuav tsum tau ua raws li suav nrog, tab sis tsis txwv rau, ntsuas qhov loj me thiab cov vaj tsev tsim nyog.
Linortek tsis tuaj yeem ua lub luag haujlwm rau kev puas tsuaj rau cov neeg siv lossis cov neeg thib peb rau kev siv peb cov khoom Fargo / Koda tsis raug. Qhov kev lav no tseem nyob nrog tus neeg siv. Linortek tsis tuaj yeem ua lub luag haujlwm rau kev puas tsuaj rau lub cuab yeej rau kev siv peb cov khoom SERVER tsis raug.
Rau cov lus qhia tshwj xeeb, thov mus saib Board Reference Layout nplooj 29
Digital Input Kev Sib Txuas (Fargo R4 thiab Koda)
Cov khoom siv digital tso cai rau SERVER txhawm rau txheeb xyuas qhov chaw sab nraud ntawm / tawm ntawm lub sensor. Nrog rau cov ntaub ntawv no, SERVER tuaj yeem tso saib seb qhov kev tawm tswv yim twg yog nyob rau lossis tawm, suav cov xwm txheej hauv lub txee resettable lossis tsis rov pib dua, thiab suav cov zaus (xws li siv los ua lub tachometer) lossis lub sijhawm ntawm cov khoom nkag. Muaj ob hom kev ua haujlwm rau cov khoom siv digital - PULL UP thiab ISOLATED.
a) PULL UP hom txuas ib qho 1K resistor mus rau sab hauv voltage tso cai rau koj siv qhov hloov pauv yooj yim (xws li lub qhov rooj sib nqus sib nqus) hla lub davhlau ya nyob twg 1 thiab 2. Qhov no thaum lub tshuab hluav taws xob qhib lub teeb liab raug xa mus rau cov tswv yim.
b) ISOLATED hom tso cai rau koj ncaj qha tsav SERVER's optoisolator nrog rau sab nraud voltage txawm tias ib qho 1K resistor. Qhov no voltage tej zaum yuav nyob rau hauv thaj tsam ntawm 5V txog 24V muab qhov tsawg kawg nkaus ntawm 2mA lossis siab tshaj ntawm 30mA rau optoisolator diode. Tsis muaj lwm yam kev sib txuas nrog rau qhov voltage yog li nws yog ib qho kev tawm tswv yim cais. Thov nco ntsoov, thaum txuas 12VDC-¬24VDC Circuit Court rau cov tswv yim, ib qho kev tiv thaiv sab nraud (tuaj yeem muab tau ntawm kev thov, 2.2k ohm 0.5watt) yuav tsum tau siv.
Cov qauv no raug xaiv los ntawm kev hloov pauv ntawm SERVER (saib Board Layout Reference nplooj ntawv 29) cim ISO thiab PU rau kev sib cais thiab rub tawm raws. Cov no tau teeb tsa ntawm lub Hoobkas rau ISO los ntawm lub neej ntawd.
Txuas lub laub khawm: Rau kev ncua deb mus txog 500 ko taw, 20 AWG shielded hlau yog tsim rau xaim lub laub khawm. Yog tias qhov kev ncua deb ntawm lub laub khawm thiab tus maub los txuas mus txog 5,000 ko taw, siv 16 AWG shielded cable hloov. Nco ntsoov tias ntev cable khiav yog qhov cuam tshuam rau cov teeb liab cuam tshuam.
Ceev faj: Yog tias koj npaj siab yuav siv hom kev sib cais, xyuas kom meej tias lub tswv yim hloov pauv tau teeb tsa rau ISO ua ntej siv cov khoom siv sab nraudtage. Ua lwm yam tuaj yeem ua rau SERVER lossis POE cov cuab yeej tsim khoom puas.
Analog Input Connections (Fargo R4ADI)
Cov analog inputs tso cai rau SERVER nyeem tus nqi ntawm cov khoom siv sab nraud. Muaj 2 analog inputs.
Rau AC tam sim no saib xyuas, siv ib qho ntawm ob lub 3.5 hli tso suab inputs los cuam tshuam nrog lub sensor tam sim no.
Lub 2 analog input davhlau ya nyob twg thaiv yog txuas nrog cov tsis raug rho tawm 0-5V tam sim no sensors uas yuav txuas nrog ntau yam khoom siv xws li kub lossis siab sensors. SERVER muab kev sib txuas hauv av thiab hluav taws xob kom ntsuas tau yam tsis muaj voltage cov ntaub ntawv. Koj yuav tsum siv lub sensor uas cais tawm kom nws tsis muaj kev sib txuas rau thaj chaw deb. Saib daim duab hauv qab Board Reference Layout nplooj 29.
Nkag mus rau koj SERVER
Thaum koj lub SERVER tau qhib thiab txuas nrog lub network, nws yuav tau txais qhov chaw nyob IP ntawm DHCP ntev npaum li koj lub router tau teeb tsa ua li ntawd. Txhawm rau txuas, sau tus IP chaw nyob rau hauv koj li web browser. Qhov no yuav coj koj mus rau koj SERVER nplooj ntawv tsaws. Txhawm rau nkag mus, nyem lub pob nkag rau sab xis saum toj ntawm nplooj ntawv. Koj tus browser yuav hais kom koj sau koj tus username thiab password. Los ntawm lub neej ntawd, cov ntawv pov thawj no tau teeb tsa rau tus thawj tswj hwm. Txhawm rau nrhiav koj tus SERVER tus IP chaw nyob, saib hauv qab no.
Nrhiav koj tus IP Chaw Nyob nrog Linortek Discoverer
Qhov kev pab cuam Discoverer yuav nrhiav tau koj tus SERVER. Lub Discoverer yog Java program, thiab xav kom Java Runtime yuav tsum tau teeb tsa kom siv cov yam ntxwv no. Java tuaj yeem pom ntawm no: http://java.com/en/download/index.jsp.
Txhawm rau rub tawm Discover program, thov mus rau: https://www.linortek.com/downloads/supportprogramming/
Pom zoo siv Chrome & Firefox browsers. Thov nco ntsoov: Yog tias koj xav siv Internet Explorer, Internet Explorer txuag Linortek Discoverer ua Zip file los ntawm lub neej ntawd. Txhawm rau siv Discoverer, koj yuav tsum xaiv Txuag li thiab hloov npe rau file li Linortek Discoverer.jar thaum koj rub tawm.
Thaum rub tawm Discover program, qee zaum koj yuav pom cov lus ceeb toom popup nyob ntawm koj qhov browser kev ruaj ntseg teeb tsa, nug seb koj puas xav khaws lossis pov tseg qhov no file, thov nyem khawm Keep vim qhov no yog Java program, thiab nws yuav tsis ua mob rau koj lub computer.
Thaum Discoverer nrhiav koj lub cuab yeej, nws yuav tso tawm:

1. IP Chaw Nyob
2. Lub Npe Lub Npe
3.  MAC Chaw Nyob
4. Lwm cov ntaub ntawv:
   a. Blue LED (yog tias muaj)
   b. Khoom npe
   c. Server Software Revision
   d. Port Number (yog tias ported)

Nyem rau ntawm lub cuab yeej koj xav siv pom ntawm Discoverer program los tso SERVER web cov nplooj ntawv hauv koj tus browser. Nyem lub Login khawm ntawm lub homepage. Lub neej ntawd username/password yog: admin/admin. Koj tuaj yeem hloov cov no raws li koj xav tau lossis lov tes taw qhov no hauv cov ntawv qhia zaub mov.
Txuas koj SERVER ncaj qha rau koj lub PC
Koj tseem tuaj yeem txuas koj SERVER ncaj qha rau koj lub PC yog tias tsis muaj kev sib txuas hauv network. Yog tias koj ntsaws koj lub SERVER rau hauv koj lub PC Ethernet chaw nres nkoj nws yuav siv qhov chaw nyob IP default: 169.254.1.1 tshwj tsis yog koj tau teeb tsa koj SERVER yav dhau los kom siv tus IP zoo li qub. Sau 169.254.1.1 rau hauv koj web browser txuas. Tsis tas yuav muaj kev sib txuas hauv internet. Thaum teeb tsa, koj tuaj yeem nruab koj SERVER qhov koj xav tau.

Server Configuration
Nkag mus
Thaum koj tau nkag mus rau IP chaw nyob thiab tus lej chaw nres nkoj, yog tias teeb tsa, nplooj ntawv nkag nkag yuav qhib. Nplooj ntawv no qhia lub npe ntawm tus neeg rau zaub mov no uas koj tuaj yeem hloov pauv hauv Configure/Network Config.

Nplooj ntawv no yog qhov zoo li qub uas tsis muaj kev ua haujlwm tom qab thiab yog qhov chaw muaj txiaj ntsig zoo rau nres yog tias koj tsis siv SERVER thiab tsis xav kaw qhov kev sib txuas.
Los ntawm nias LOGIN, koj yuav raug nug txog koj tus username thiab password. Cov ntawv pov thawj no yuav khaws cia los ntawm browser kom txog thaum lub browser kaw. Koj tuaj yeem lov tes taw tus password yuav tsum tau nyob hauv nplooj ntawv chaw. Saib tshooj 21.
Nplooj ntawv
Thaum koj cov ntaub ntawv pov thawj nkag mus, koj yuav raug xa mus rau nplooj ntawv tseem ceeb ntawm daim ntawv thov. Lub Tsev lossis Index nplooj ntawv qhia qee cov ntaub ntawv hauv lub cev thiab muaj peev xwm nrhiav tau lub cev lub cev yog tias nws nyob hauv thaj chaw nrog lwm tus. Saib cov npe hauv qab no kom piav qhia.

• SIJ HAWM – Tso tawm nrog rau hnub ntawm lub lim tiam. Lub sij hawm no yuav raug teem kom nyob rau hauv 12 teev hom nrog AM / PM qhia lossis 24 teev hom.
• DATE – Hnub tim tam sim no muaj nyob ntawm no.
• VOLTS – Voltage ntawm lub rooj tsavxwm yog tso tawm. Qhov no yuav pab tau yog tias SERVER yog powered nrog rau lwm yam khoom siv, voltage variance tuaj yeem sau tseg. Fargo thiab Koda servers muaj cov tswv yim voltage ntau ntawm 1248vDC.
• TEMPERATURE – Kub ntawm lub rooj tsavxwm yog tso tawm. Cov zaub no yuav yog ° C lossis ° F. Qhov ntsuas kub no yuav cuam tshuam los ntawm cov cua sov tsim los ntawm SERVER nws tus kheej yog li nws yuav ib txwm siab me ntsis siab dua qhov kub thiab txias.
• LEDs - Muaj 3 LEDs tso tawm. RED LED yog qhov system mem tes. Qhov no yuav tsum blink txog ib zaug ib ob ntev li ntev raws li lub server tab tom khiav. GREEN LED yog siv rau kev xaiv bootloader thiab feem ntau tsis pom ntawm qhov webqhov chaw. BLUE LED yog clickable thiab koj tuaj yeem tig nws rau thiab tawm ntawm qhov no web nplooj. Qhov no yog qhov tseem ceeb rau kev nrhiav cov cuab yeej siv lub cev yog tias nws siv nrog lwm cov khoom sib xws li nws yuav teeb pom kev ntawm lub tsev uas qhov no web browser txuas nrog. Qhov kev pab cuam Discoverer tseem yuav ceeb toom yog tias BLUE LED qhib. Qhov no feem ntau hu ua "Nrhiav" muaj nuj nqi.

Kev pabcuam
Cov Kev Pabcuam tab yog qhov hloov pauv thiab yuav hloov pauv raws li kev teeb tsa ntawm koj lub server. Qhov no yog qhov chaw uas koj tuaj yeem tswj cov khoom nkag, tawm, sensors thiab lwm yam kev tswj tshwj xeeb.
Hauv / Tawm lossis Relays Nplooj
Nyob ntawm seb koj siv SERVER twg, thawj nplooj ntawv ntawm SERVICES tab yuav yog In / Out lossis Relays.
Hauv / Tawm muaj cov kev tswj hwm relay thiab cov tswv yim tswj ntawm ib nplooj ntawv, thaum Relays tsuas muaj kev tswj hwm relay.
Relay tswj
Ib nplooj ntawv hauv / tawm tau tshwm sim hauv qab no. Qee nplooj ntawv tswj hwm relay muaj 2, 4 lossis 8 relays tso tawm. Txhua relay muaj tus lej, hauv qhov no 1 txog 4.

Lub Xeev LED qhia seb lub relay yog nyob rau lossis tawm qhia los ntawm GREEN thiab RED raws li. Lub icon no yog clickable los tswj tus neeg siv relay. Txhua tus relay tuaj yeem muaj Lub Npe nrog rau cov cim rau qhov Nquag Qhib, Common thiab Nquag kaw kev sib txuas.
Muaj plaub qhov xwm txheej LEDs qhia:

1. Email - Yog tias email yuav raug xa thaum qhov kev hloov pauv no tau qhib / tawm
2. Pulse - Yog tias qhov Relay no tau teeb tsa nrog lub mem tes dav thiab mem tes dav qhov sib npaug (lub sijhawm) - saib ntu txuas ntxiv kom paub ntxiv
3.  Teem sijhawm. - Yog tias muaj lub sijhawm tsim nyob rau hauv Cov Haujlwm nplooj ntawv (saib nplooj 15) teeb tsa kom tau txais qhov kev xa tawm no.
4.  Sijhawm - Yog tias pulse tau teeb tsa thiab qhov kev hloov pauv no tau qhib, Lub Sijhawm LED yuav tig liab uas qhia tias tam sim no relay tab tom ua haujlwm ntawm lub sijhawm.

Nyem qhov Kho kom raug Icon los hloov cov kev tswj rau tus coj relay. Qhov no yuav coj koj mus rau nplooj ntawv Set Relay (saib nplooj 11).
Cov tswv yim
Nplooj ntawv nkag / tawm lossis nkag (nyob ntawm koj SERVER) yuav tso tawm cov ntaub ntawv los ntawm txhua qhov kev tawm tswv yim. SERVERs muaj kev sib xyaw ua ke ntawm cov khoom siv. Lub Fargo R4DI muaj plaub lub tswv yim digital, Lub R4ADI muaj, plaub lub tswv yim digital, plaub analog inputs. KODA SERVER muaj ob lub tswv yim digital.
Nyob rau sab saum toj ntawm txhua qhov kev tawm tswv yim yog daim ntawv lo (piv txwv li: DIN 1, AIN 2) qhia seb nws puas yog digital input (DIN) lossis analog input (AIN) nrog rau tus lej nkag. Daim ntawv lo no yuav tig ntsuab thaum lub tswv yim qhib. Nyob rau hauv lub thawv yuav yog ib qho zaub configured los ntawm lub teeb Input nplooj ntawv (saib nplooj 12 rau digital input, nplooj 14 rau analog input). Ib tug liab dot nyob rau hauv qis-sab laug ces kaum qhia lub xeev ntawm ib tug txuas relay (yog tias muaj), yuav tig ntsuab thaum lub linked relay qhib.
Thaum kawg, ib qho Kho kom raug icon nyob rau hauv qis-txoj cai ces kaum ntawm lub npov los hloov kho cov ntaub ntawv sib raug. Qhov no yuav coj koj mus rau qhov teeb tsa Digital Input lossis Set Analog Input nplooj ntawv (nplooj 12 lossis nplooj 14).
Teem Relay Nplooj
Nplooj ntawv SET RELAY tso cai rau koj los teeb tsa ntau yam khoom ntsig txog Relay.

1. Relay Xaiv - Tus Relay uas koj tab tom kho ( txheeb xyuas los ntawm kab uas koj nyem rau Kho kom raug icon ntawm nplooj RELAY).
2. Lub Npe - Nkag mus rau 15 tus cim Relay Lub Npe. Qhov no thiab 3 daim teb hauv qab no tuaj yeem siv rau cov ntaub ntawv txheeb xyuas uas xav tau.
3. TSIS TXAUS SIAB - Sau lub npe 7-tus cim rau qhov Nquag Qhib (NO) txuas.
4. Com Lub Npe - Sau lub npe 7-tus cim rau kev sib txuas (COM).
5. NC Lub Npe - Nkag mus rau 7-tus cim lub npe rau qhov Nquag Kaw (NC) txuas.
6. Pulse Width - Thaum koj tswj lub relay nws tig rau lossis tawm. Koj tuaj yeem tswj nws rau lub sijhawm qhib rau lub sijhawm los ntawm kev nkag mus rau Pulse Width thaum 0 txhais tau tias tsis muaj sijhawm teem sijhawm thiab tus lej sawv cev rau lub sijhawm ntawm lub mem tes. Tus lej siab tshaj plaws uas koj tuaj yeem nkag rau ntawm no yog 4 tus lej, piv txwv li. 1234 ib.
7. Pulse Width Multiplier - Txhawm rau txheeb xyuas qhov ntev ntawm lub mem tes xaiv lub Pulse Width Multiplier txhawm rau txheeb xyuas qhov dav ntawm mem tes. Koj tuaj yeem xaiv:
   • Tsis muaj
   • mS (Millisecond, 1/1000 thib ob)
   • Sec (Seconds)
   • Min (feeb)
8. Hom Relay - SERVER tuaj yeem nkag mus rau lub cev ntawm SERVER lossis siv lwm txoj kev. Koj tuaj yeem xaiv:
   • Ib txwm – relay lub cev ntawm SERVER
   • Latched – tam sim no tsis txaus siab
   • Chaw taws teeb – ib tug relay ntawm lwm tus SERVER nkag tau rau hauv lub network
   • Zigbee – ib tug relay ntawm ib tug tej thaj chaw deb ntaus ntawv nkag mus rau ib tug RF system
   • Ib txwm thiab tej thaj chaw deb – ob qho tib si relay qhib
   • Ib txwm thiab Zigbee – ob qho tib si relay qhib
9. Qhov chaw ID - qhov no yog tus lej txheeb xyuas qhov chaw nyob deb
10. Relay ntawm Qhov Chaw - tus lej sawv cev rau lub relay lossis ntaus ntawv ntawm Qhov Chaw
11. Xa Email - SERVER tuaj yeem tsim los xa email yog tias lub relay qhib lossis kaw.

Teem Digital Input Page
Cov Inputs Digital tuaj yeem tsim los muab ntau yam kev nyeem ntawv ntawm kev siv ntau hom zaub. Ntxiv nrog rau kev tso tawm cov ntaub ntawv tawm tswv yim, koj tuaj yeem sau npe rau cov zaub thiab koom nrog ib qho relay nrog nws. Qhov no relay yuav hloov los ntawm ntsuab rau RED raws li nws mus los ntawm rau mus rau off thiab yog clickable los tswj nws. Los ntawm txhaj rau lub cim hloov cwj mem, koj tuaj yeem hloov kho qhov chaw rau cov tswv yim no:

1. Cov tswv yim Digital Xaiv - Cov tswv yim Digital uas koj tab tom kho ( txheeb xyuas los ntawm kab uas koj nyem rau Kho kom raug icon).
2. Lub Npe - Koj tuaj yeem teeb tsa 15 tus cim npe rau qhov kev nkag siab no. Lub npe no mus rau hauv lub bar nyob rau sab saum toj ntawm cov zaub.
3. Label - Teem ib daim ntawv 7-tus cim uas tau tshwm sim ntawm cov khoom siv tiag tiag.
4. Corrector - Siv daim teb no koj tuaj yeem ntxiv, rho tawm, sib faib, lossis faib tus nqi ua ntej tus nqi yuav tshwm rau ntawm nplooj ntawv. Qhov no yog 2-tus nqi kho nrog txhua qhov sib cais los ntawm ib qho chaw cim. (ie. “+2, -2, *3, /3”)
5. USE - Teem lub tswv yim no kom ua haujlwm. Tig lub input naj npawb qhia rau ntsuab. Nws yuav tsum raug sau tseg tias thaum siv cov tswv yim siv CPU sijhawm thiab lwm yam kev pab nyob ntawm nws hom. Txawm hais tias tag nrho cov tswv yim tuaj yeem ua haujlwm tib lub sijhawm, nws raug nquahu kom qhib tsuas yog cov uas koj xav siv.
6.  Hom - Cov ntaub ntawv tawm tswv yim tuaj yeem siv los xam ntau qhov txiaj ntsig. Koj tuaj yeem xaiv:
   • Xeev – Qhov no muaj txiaj ntsig rau kev paub yog tias muaj kev tawm tswv yim qhib lossis kaw, zoo li lub qhov rooj qhib lossis kaw.
   • CounterNR – Qhov no yog lub txee uas tsis tuaj yeem hloov dua tshiab.
   • CounterR – Qhov no yog lub txee resettable.
   • Zaus – suav qhov zaus ntawm cov tswv yim hauv KHz (kilo hertz lossis 1/1000 vib nas this). Qhov no tuaj yeem pab tau hauv kev nthuav tawm lub tachometer qhov twg 60Hz = 1 RPM
   • Lub Sijhawm – nyob rau hauv 1/1000 vib nas this ib input in kHz (milliseconds los yog 1/1000 vib nas this). Qhov no yuav muaj txiaj ntsig zoo rau kev ntsuas lub sijhawm.
7.  Zaub - Qhov kev xaiv no tso cai rau koj hloov cov zaub hom siv. Koj tuaj yeem xaiv:
   • Dot – Ib qho chaw nrog tus nqi nyob nruab nrab. Qhov no tuaj yeem siv rau Xeev. Koj tuaj yeem ua qhov taw qhia ruam los ntawm kev hloov xim ntawm Dot raws li tus nqi. Daim ntawv lo yog nyob rau hauv Dot.
   • Tus nqi – Qhia tus nqi kho nrog daim ntawv lo rau hauv ib lub thawv ncaj qha hauv qab nws.
   • Meter – Qhov ntsuas no muaj qhov ntsuas tau raws li qhov Min/Max qhov tseem ceeb thiab arcs tuaj yeem ua xim raws li xim xim. Daim ntawv lo yog tso rau hauv lub Meter.
   • VBar – Kuj raws li qhov Min/Max qhov tseem ceeb rau qhov teev thiab lub bar hloov xim raws li qhov tseem ceeb hauv cov xim ntau yam.
8. Relay L / T - Sau tus lej Relay ntawm no. Yog hais tias nws yog ib lub zos relay nws yuav qhia GREEN los yog RED nyob ntawm seb nws yog nyob rau los yog tawm. Los ntawm txhaj rau nws lub relay yuav tig rau thiab tawm. Lub npe los ntawm nplooj ntawv teeb tsa relay. Qhov no tej zaum yuav pab tau yog tias koj xav tig cov ntsiab lus ntawm ib qho screen rau thiab tawm. Ib qho relay tuaj yeem siv rau ntawm ib qho kev tawm tswv yim thiab txhua tus tuaj yeem rov qab siv rau lwm cov tswv yim. Ntxiv tus L tom qab tus xov tooj relay (piv txwv li: 2L) yuav txuas lub xeev ntawm cov tswv yim mus rau lub xeev ntawm relay. Qhov no yog ib txoj hauv kev yooj yim thiab tam sim ntawd kom muaj kev tawm tswv yim ua raws li cov relay. Ntxiv ib tug T tom qab tus xov tooj relay yuav ua rau lub relay mus rau lub xeev ntawm input. Qhov no yog ib qho yooj yim thiab tam sim no txoj kev kom muaj ib tug relay ua raws li cov tswv yim.
9.  Hais kom Z / N / I - Daim teb no yog siv rau kev tshaj tawm ntau cov lus txib rau Digital Input controller: Z Zero lub txee resettable. N Cia cov tswv yim li qub. Kuv Invert lub tswv yim.
10. Tus nqi - Cov no yog Min / Max qhov tseem ceeb siv rau cov zaub. Qhov no muaj txiaj ntsig zoo rau kev tiv thaiv Meter los ntawm kev mus dhau nws qhov kawg lossis teeb tsa tus nqi ntawm VBar. Qhov no yog tus nqi tom qab kho. Lub kaw lus tsis tuaj yeem tso saib tus nqi dhau los Max, yog li nco ntsoov qhov no tsawg kawg yog teem rau 1.
11. Daj / Liab / Ntsuab - Muaj peb xim uas tuaj yeem siv los txhais cov duab ntxiv. Teem ntau yam ntawm cov xim no los txhais cov xim rau cov zaub Tus nqi. Qhov no yog tus nqi tom qab kho. Nco ntsoov tias yog koj siv lub xeev hom koj yuav xav muab RED = Los ntawm 0 mus rau 0, GREEN = Los ntawm 1 mus rau 1 thiab YELLOW = Los ntawm 2 mus rau 2. Txij li thaum lub Xeev ib txwm yog 1 lossis 0 qhov no yuav tiv thaiv cov ntaub ntawv tsis meej thiab tiv thaiv YELLOW xim los ntawm kev siv. Koj tuaj yeem xaiv ob xim uas koj nyiam rau ib hom Lub Xeev.

Teem Analog Input Page
Analog Inputs tuaj yeem tsim los muab ntau yam kev nyeem ntawv ntawm kev siv ntau hom zaub. Ntxiv nrog rau kev tso tawm cov ntaub ntawv tawm tswv yim, koj tuaj yeem sau npe rau cov zaub thiab koom nrog ib qho relay nrog nws. Qhov no relay yuav hloov los ntawm ntsuab rau RED raws li nws mus los ntawm rau mus rau off thiab yog clickable los tswj nws.

1. Analog Input Xaiv - Cov tswv yim Analog uas koj tab tom kho ( txheeb xyuas los ntawm kab uas koj nyem rau Kho kom raug icon).
2.  Lub Npe - Koj tuaj yeem teeb tsa 15 tus cim npe rau qhov kev nkag siab no. Lub npe no mus rau hauv lub bar nyob rau sab saum toj ntawm cov zaub.
3. Label - Teem ib daim ntawv 7-tus cim uas tau tshwm sim ntawm cov khoom siv tiag tiag.
4. Corrector - Siv daim teb no koj tuaj yeem ntxiv, rho tawm, sib faib, lossis faib tus nqi ua ntej tus nqi yuav tshwm rau ntawm nplooj ntawv. Qhov no yog 2-tus nqi kho nrog txhua qhov sib cais los ntawm ib qho chaw cim. (ie. “+2, -2, *3, /3”)
5. USE - Teem lub tswv yim no kom ua haujlwm. Tig qhov taw qhia tus lej nkag mus rau GREEN. Nws yuav tsum raug sau tseg tias thaum siv cov tswv yim siv CPU sijhawm thiab lwm yam kev pab nyob ntawm nws hom. Txawm hais tias tag nrho cov tswv yim tuaj yeem ua haujlwm tib lub sijhawm, nws raug nquahu kom qhib tsuas yog cov uas koj xav siv.
6. Hom - Cov ntaub ntawv tawm tswv yim tuaj yeem siv los xam ntau qhov txiaj ntsig. Koj tuaj yeem xaiv:
   • Analog 1 – Analog 1 input los ntawm SERVER nrog ib qho kev tawm tswv yim xws li pom ntawm R4ADI.
   • Analog 2 – Analog 2 input los ntawm SERVER nrog ib qho kev tawm tswv yim xws li pom ntawm R4ADI.
   • AC Tam sim no 1 – AC tam sim no sensor 1 input los ntawm SERVER nrog ib qho kev tawm tswv yim xws li pom ntawm R4ADI.
   • AC Tam sim no 2 – AC tam sim no sensor 2 input los ntawm SERVER nrog ib qho kev tawm tswv yim xws li pom ntawm R4ADI.
   • AC Tam sim no 3 – Tsis siv
   • Volts – Qhov ntsuas ntawm lub voltage powering SERVER.
   • Tam sim no - Ntawm "S" qauv, qhov no yog qhov tam sim no siv los ntawm SERVER.
   • Int. Temp - Kub los ntawm lub rooj tsavxwm mounted sensor.
   • Ext. Temp - Kub los ntawm "S" qauv SERVER.
   • R. Humidity – % Relative Humidity los ntawm "S" qauv SERVER.
   • MMA X – X axis accelerometer cov ntaub ntawv los ntawm "S" qauv SERVER.
   • MMA Y – Y axis accelerometer cov ntaub ntawv los ntawm "S" qauv SERVER.
   • MMA Z – Z axis accelerometer cov ntaub ntawv los ntawm "S" qauv SERVER.
7. Zaub - Qhov kev xaiv no tso cai rau koj hloov cov zaub hom siv. Koj tuaj yeem xaiv:
   1. Dot – Ib lub dot nrog tus nqi hauv nruab nrab. Qhov no tuaj yeem siv rau Xeev. Koj tuaj yeem ua qhov taw qhia ruam los ntawm kev hloov xim ntawm Dot raws li tus nqi. Daim ntawv lo yog nyob rau hauv Dot.
   2. Tus nqi – Qhia tus nqi kho nrog daim ntawv lo rau hauv ib lub thawv ncaj qha hauv qab nws.
   3. Meter - Qhov ntsuas no muaj qhov ntsuas tau raws li qhov Min/Max qhov tseem ceeb thiab arcs tuaj yeem ua xim raws li xim ntau yam. Daim ntawv lo yog tshwm nyob rau hauv lub Meter.
   4. VBar – Kuj raws li qhov Min/Max qhov tseem ceeb rau qhov teev thiab lub bar hloov xim raws li qhov tseem ceeb hauv cov xim ntau yam.
8. Relay - Sau tus lej Relay ntawm no. Yog hais tias nws yog ib lub zos relay nws yuav qhia ntsuab los yog RED nyob ntawm seb nws yog nyob rau los yog tawm.
   Los ntawm txhaj rau nws lub relay yuav tig rau thiab tawm. Lub npe los ntawm nplooj ntawv teeb tsa relay. Qhov no tej zaum yuav pab tau yog tias koj xav tig cov ntsiab lus ntawm ib qho screen rau thiab tawm. Ib qho relay tuaj yeem siv rau ntawm ib qho kev tawm tswv yim thiab txhua tus tuaj yeem rov qab siv rau lwm cov tswv yim.
9. Tus nqi - Cov no yog Min / Max qhov tseem ceeb siv rau cov zaub. Qhov no muaj txiaj ntsig zoo rau kev tiv thaiv Meter los ntawm kev mus dhau nws qhov kawg lossis teeb tsa tus nqi ntawm VBar. Qhov no yog tus nqi tom qab kho. Lub kaw lus tsis tuaj yeem tso saib tus nqi dhau los Max yog li nco ntsoov qhov no tsawg kawg yog teem rau 1.
10.  Daj / Liab / Ntsuab - Muaj peb xim uas tuaj yeem siv los txhais cov duab ntxiv. Teem ntau yam ntawm cov xim no los txhais cov xim rau cov zaub Tus nqi. Qhov no yog tus nqi tom qab kho. Nco ntsoov tias yog koj siv lub xeev hom koj yuav xav muab RED = Los ntawm 0 mus rau 0, GREEN = Los ntawm 1 mus rau 1 thiab YELLOW = Los ntawm 2 mus rau 2. Txij li thaum lub Xeev ib txwm yog 1 lossis 0 qhov no yuav tiv thaiv cov ntaub ntawv tsis meej thiab tiv thaiv YELLOW xim los ntawm kev siv. Koj tuaj yeem xaiv ob xim uas koj nyiam rau ib hom Lub Xeev.

Tasks Page
TASKS nplooj ntawv qhia cov xwm txheej tsis siv neeg uas tuaj yeem ua haujlwm rau hauv SERVER. Koj tuaj yeem teem sijhawm txog 16 txheej xwm hauv SERVER. Cov no yog tsim los ua IF… TAM SIM NO. Tsis tas li ntawd, lub sij hawm IF tuaj yeem muaj 2 lub ntsiab lus (IF a, THIAB / LOS YOG / TSIS b ... TAM SIM NO c). Qhov no muab ib qho yooj yim rau kev pab cuam thiab muaj zog txoj kev coj advantage ntawm cov ntaub ntawv tau los ntawm SERVER. Nplooj ntawv Tasks qhia koj ib qho dhauview ntawm configured tej hauj lwm. Koj tuaj yeem nyem qhov dot hauv State kem kom tig ib txoj haujlwm rau lossis tawm uas qhia los ntawm lub cim ntsuab rau ON, thiab cov dot liab rau OFF. Txhawm rau hloov lossis tsim ib txoj haujlwm, nyem qhov Kho kom raug icon mus rau sab xis ntawm txoj haujlwm. Qhov no yuav coj koj mus rau nplooj ntawv Teem Sijhawm teem kom ntxaws hauv ntu tom ntej.

Teem caij nplooj ntawv
SET SCHEDULE nplooj ntawv tso cai rau koj los tsim lub sijhawm thiab cov xwm txheej raws li kev xav uas yuav tshwm sim tau yog tias cov xwm txheej tau ua tiav.

1. Lub Sijhawm Xaiv - Txiav txim siab los ntawm txhaj rau ntawm kab ntawv teem sijhawm los ntawm nplooj ntawv dhau los.
2.  Lub Sijhawm Lub Npe - Sau 15-tus cim Lub Npe Lub Npe.
3. SIV - Txhawm rau kom lub sijhawm teem caij ua haujlwm koj yuav tsum xaiv USE khawm. Yog tias pom muaj qhov yuam kev hauv kev nkag mus rau Schedule cov ntaub ntawv, USE lub thawv yuav cia li uncheck.
4. LOG - Xaiv lub cav rau cov khoom no kom tshwm sim hauv lub kaw lus txhua zaus nws raug tua.
5. Email - Nyem Email kom xa email xa tuaj thaum lub sijhawm ua tiav.
6. Ntaus A - Xaiv Ntaus A rau thawj lub sijhawm hauv IF nqe lus los ntawm lub thawv xa khoom.
7.  Cov Ntaub Ntawv A - Xaiv Cov Ntaub Ntawv A rau cov khoom siv saum toj no. Nyob ntawm cov cuab yeej xaiv, cov ntaub ntawv siv rau kev sim yuav muaj cov khoom tshwj xeeb. Saib cov npe hauv qab no rau Cov Ntaub Ntawv uas tuaj yeem nkag mus. Yog tias qhov yuam kev raug kuaj pom cov ntaub ntawv nkag thaum lub pob "Txuag" raug thawb, USE lub thawv yuav tshem tawm thiab cov ntaub ntawv lub thawv uas muaj qhov yuam kev yuav raug qhia.
   • feeb – Nkag mus: mm
   • Teev – Nkag mus: hh (siv lub kaw lus 24-teev)
   • Hnub – Nkag mus: dd
   • Hnub Sunday – Nkag mus: Hnub Sunday = 1, Monday = 2, Tuesday = 3, Wednesday = 4, Thursday = 5, Friday = 6, Hnub Saturday = 7, Hnub Sunday = 8, Hnub so = 9
   • Lub Sijhawm – Nkag mus: hh:mm (siv tus lej lej, vib nas this tsis quav ntsej) (siv 24 teev) ex: 07:30 lossis 14:05
   • Hnub tim – Nkag mus: yy/mm/dd (siv tus lej lej) ex: 20/01/10 rau Lub Ib Hlis 10, 2020
   • Relay – Nkag mus: Relay tooj thiab (+ lossis -), xws li: 01+ rau Relay 1 ON lossis 01- rau Relay 1 OFF
   • Khawm – Nkag mus: + lossis – (rau ON lossis OFF feem)
   • Chij – Nkag mus: Chij tooj (opt.+), lossis Chij tooj (rau ON los yog OFF feem)
   • Temp – Enter: >, = or < value; example:> 40 (ib txwm degrees C)
   • Volts – Sau: >, = los yog < tus nqi; example: <10
   • Analog – Analog input. Sau tus lej nkag thiab >, = lossis < thiab tus nqi. Example: 3<123 (Tus nqi no yog tus nqi raw cov ntaub ntawv ua ntej rau ib qho Corrector siv los ntawm nplooj ntawv nkag.)
   • Digital – Digital input. Sau tus lej nkag, Hom, >, =, lossis < thiab tus nqi; example: 1F> 7500 (Tus nqi no yog tus nqi raw cov ntaub ntawv ua ntej ib qho Corrector siv rau ntawm nplooj ntawv). Hom tuaj yeem yog (case sensitive):
   • S State (Qhib / Off)
   • C Tsis-resettable counter
   • c Resettable counter (cov ntawv qis 'c')
   • F zaus hauv 1/1000 vib nas this
   • P Lub Sij Hawm hauv 1/1000 vib nas this
8. Logic - Teem lub Logic sib piv ntawm Ntaus A thiab Ntaus B.
   • THIAB – Muaj tseeb yog tias: Ntaus A muaj tseeb thiab ntaus B yog qhov tseeb
   • LOS YOG – Muaj tseeb yog tias: Ntaus A muaj tseeb lossis Ntaus B yog qhov tseeb
   • TSIS MUAJ - Muaj tseeb yog tias: Ntaus A muaj tseeb thiab Ntaus B tsis muaj tseeb
9.  Ntaus B - Xaiv Ntaus B rau kev sim los ntawm lub thawv poob.
10. Cov Ntaub Ntawv B - Xaiv Cov Ntaub Ntawv B rau lub cuab yeej saum toj no. Nyob ntawm cov cuab yeej xaiv cov ntaub ntawv siv rau kev sim yuav muaj cov khoom tshwj xeeb. Saib cov npe saum toj no.
11.  Ntaus C - yog dab tsi los tswj.
12. Cov ntaub ntawv C – Teem cov cuab yeej rau Ntaus C. Syntax yog siv raws li hauv qab no:
    • RELAY – Cov no yog relays ntawm no SERVER. Koj tuaj yeem teem caij mus txog plaub rau ib lub sijhawm. Sau cais los ntawm commas, piv txwv liampyog “1,2,3,4”
    • FLAG – Qhov no yog lub cim cia uas tuaj yeem siv los ua cov txheej txheem nyuaj dua. Muaj 8 tus chij uas tuaj yeem qhib lossis kaw.
    • REMOTE – Hais txog lub chaw SERVER nyob deb. Thaum cov xwm txheej no tau ua tiav, SERVER no yuav xa cov lus txib los tswj lub chaw taws teeb SERVER. Cov ntaub ntawv teb rau ib chav nyob tej thaj chaw deb yuav tsum yog hom ntawv,
    "KEV UA HAUJ LWM UA HAUJ LWM, REMOTE UNIT RELAY". Rau example, “3,5”. Cov SERVERS tej thaj chaw deb no yuav tsum raug txheeb xyuas hauv nplooj ntawv Configure/Remote Device Config.
    • COUNTER – Ntxiv suav rau cov khoom siv digital input txee – teem li 1 lossis 2 nyob ntawm seb cov tswv yim twg suav
    • BLUE LED – Tsis muaj ntaub ntawv.
    • eMAIL – Yuav xa eMail, tsis muaj ntaub ntawv.
    • CEEB TOOM – Yuav xa ntawv ceeb toom rau Kodalert, teem 1- 8 rau Chaw/Tswb ceeb toom naj npawb. (Tsis siv)
13.  Kev Ua - Yuav ua li cas nrog Ntaus C. Cov kev xaiv yog:
    • ON – Tig lub cuab yeej ON
    • OFF – Tig ntaus ntawv OFF
    • TGL – Toggles lub xeev ntawm Ntaus C
    • RESET – Resets CounterR

Nplooj ntawv
Lub Logs tab qhia ntau dua 10,000 nkag los ntawm kev ua los ntawm SERVER lossis los ntawm cov neeg siv lawv tus kheej. Cov yam ntxwv no tso cai rau ntau qhov kev ua kom yooj yim ntawm kev nthuav tawm thiab sau cov ntaub ntawv los ntawm SERVER.

1. Lub checkboxes saum toj no hnub tso cai rau tus neeg siv los lim cov cav los ntawm ntau qhov chaw. Txhawm rau lim tawm cov cav koj tsis xav pom los ntawm qee qhov chaw tsuas yog uncheck lub thawv.
2. Txhua lub cav muaj tus lej siv thiab lub sijhawm thiab hnub uas txuas rau hauv "yyyy/mm/dd" thiab "hh:mm:ss" hom. Tom qab ntawd yog qhov tshwm sim tshwm sim.
3. Txhawm rau scroll los ntawm cov cav, siv cov xub mus rau sab xis, qhov twg kab kab rov tav thiab xub coj koj mus rau qhov pib lossis xaus, ob lub xub txav nce lossis nqis ib nplooj ntawv, thiab ib tus xub txav nce lossis nqis ib zaug.
4. Txhawm rau hloov kho cov cav manually nyem lub pob REFRESH hauv qab Cov Lus Qhia.
5. Txhawm rau rub tawm Cov Lus Qhia Log, nyem lub pob DOWNLOAD hauv qab Cov Ntaub Ntawv Cov Ntaub Ntawv, qhov no tso cai rau koj khaws cov cav sib cais. file.

Tus neeg siv thiab Admin Credentials Page
Siv cov nplooj ntawv no los ntawm cov ntawv qhia zaub mov nqis. Ntawm no koj tuaj yeem teeb tsa 3 tus neeg siv rau koj qhov SERVER system. Raws li lub neej ntawd tsuas yog siv 1 yog Active. Ntawm no koj tuaj yeem:

1. Tus neeg siv lub npe thiab tus password - Txhua tus neeg siv muaj lawv tus kheej daim ntawv pov thawj. Raws li lub neej ntawd cov no tau teeb tsa toadmin/admin, user2/user2 thiab user3/user3 rau Cov Neeg Siv 1, 2 thiab 3 feem. Cov passwords yeej tsis tshwm sim. Nco tseg: thaum koj rov pib dua tus password, nws yuav tsum tsawg dua 13-tus cim.
2. Active - Yuav tsum tau kuaj xyuas rau tus neeg siv no kos npe rau, koj tsis tuaj yeem deactivate User 1.
3. Admin - Tsuas yog admin tuaj yeem khaws cov ntaub ntawv hauv ntau nplooj ntawv. Qhov no tiv thaiv koj SERVER los ntawm kev hloov pauv los ntawm tus neeg tsis tau tso cai.
4. Timeout - Tsis tau qhib lub sijhawm no.

Sijhawm/hnub tim nplooj
Siv nplooj ntawv no los ntawm cov ntawv qhia zaub mov nqis nqis. Nplooj ntawv no tso cai rau koj los teeb tsa lub sijhawm thiab hnub tim.

1. Sijhawm - Teem sijhawm siv hom ntawv hh:mm:ss.
2. Hnub tim – Teem hnub siv hom yy/mm/dd.
3. Lub Sijhawm Cheeb Tsam - Teem lub sijhawm xav tau 5 rau EST, 8 rau PST, tam sim no koj tuaj yeem ntxiv ib qho : hli rau kev teeb tsa ib teev, rau example, 5:30 is a time zone at 5 teev 30 feeb.
4. Siv Lub Sijhawm Txuag Hnub Nruab Hnub - Xaiv los kho koj lub sijhawm tsis siv neeg nyob rau hnub txuag hnub. (Tsis muaj tseeb hauv txhua lub sijhawm.)
5. Siv MIL Sijhawm - Xaiv siv hom ntawv 24-teev.
6. Siv NTP Hloov Kho - Xaiv los synchronize SERVER lub sijhawm nrog NTP server
7.  NTP Web Site - Qhov no yog NTP neeg rau zaub mov xaiv rau kev hloov tshiab.
8. NTP Interval – Lub sij hawm ncua ntawm kev hloov tshiab hauv feeb.
9.  Log NTP Event - Feem ntau NTP kev zam yuav raug sau npe, xaiv qhov kev xaiv no los teev txhua qhov xwm txheej NTP. (Tej zaum yuav muaj txiaj ntsig hauv kev debugging.)

Nplooj ntawv

Nkag mus rau nplooj ntawv no los ntawm cov ntawv qhia zaub mov nqis nqis. Xaiv cov chaw no kom pab tau ntau yam hauv SERVER

1. Siv Active Main – Tsis siv lawm. (Xaiv PAUSE mus tsis ua haujlwm.)
2.  Yuav tsum tau nkag mus - Yog tias tsis xaiv SERVER yuav tso cai rau txhua qhov kev nkag mus yam tsis muaj ntawv pov thawj.
3. Siv IP Ranges - Tsis Siv.
4. Siv RESTFUL IP Ranges - Tsis siv.
5. Siv Cov Chaw IP Chaw Taws Teeb - Tsis siv.
6. Siv RESTful Authentication - Yuav tsum tau siv lub npe thiab tus password rau RESTful.
7. Ntxiv Relay Range - Pab kom 8 relays.
8. Siv Relay Xov tooj cua Khawm - Yog tias teeb tsa, thaum ib qho relay qhib, tag nrho lwm tus raug tua.
9. SSL Chaw nres nkoj No. – Tsis txaus siab – Rau yav tom ntej siv.
10.  Siv System emails - Ua kom muaj cov lus email ntxiv.
11. Siv Fahrenheit – Xaiv Celsius lossis Fahrenheit.
12. PGM Dynamic Relays - Hloov cov khoom ntawm relays hauv lub sijhawm ua haujlwm.
13.  CLR PGMs ntawm Pib - Rov pib ua haujlwm thaum pib.
14.  RTC Temperature Compensation - Txhua Koda boards tuaj yeem ntxiv qhov ntsuas kub thiab av noo.
15.  Siv AM2302 - Siv AM2302 Kub thiab Humidity sensor (muag nyias).
16.  Java Report - Xa cov ntaub ntawv mus rau HourCollector app hla ethernet (tsuas yog rau IoTeter)
17.  Siv Metric - Tsis txhawb - Rau kev siv yav tom ntej.
18.  UART Kev Siv - Nkag mus "Audio" rau Netbell-NTG, "Tsev" rau Netbell moos.
19.  Hloov Bypass (1/2) - Tsis quav ntsej cov tswv yim lub cev yog tias teeb tsa. Rau example, hauv Koda 200 board, koj xav tsis quav ntsej cov tswv yim 1 hloov, kos Hloov Bypass 1
20.  Teeb tsa 19 - Tsis txhawb - Rau kev siv yav tom ntej
21. Siv Suab File System - Qhib SD Card nyeem ntawv rau Netbell-NTG
22.  Daim ntawv tshaj tawm WiFi - Pab kom hloov cov ntaub ntawv hla WiFi (WiFi IoTeter nkaus xwb)
23.  Active Landing Page – Tsis txaus siab – Rau yav tom ntej siv.
24. . Invert Relay Control - Lub relay yog teem rau TSIS TAU los ntawm lub neej ntawd. Los ntawm kos lub thawv no lub relay yuav hloov mus rau NC.
25.  Teeb tsa 24 - Tsis txhawb - Rau kev siv yav tom ntej.

Dynamic DNS Nplooj ntawv
Nkag mus rau nplooj ntawv no los ntawm Configure dropdown menu. Los ntawm nplooj ntawv no koj tuaj yeem muab dynamic DNS nqis. Nplooj ntawv no, nrog rau cov chaw nres nkoj kom raug xa mus los ntawm lub router, tuaj yeem ua kom lub ntiaj teb nkag mus rau lub cuab yeej tom qab NAT router lossis firewall. Koj yuav tsum tau muab qhov chaw nyob IP zoo li qub thiab tus lej chaw nres nkoj (saib Network Config Nplooj ntawm nplooj ntawv 25) thiab chaw nres nkoj IP chaw nyob ntawm koj lub router (saib rau koj tus router tus neeg siv phau ntawv). Tus IP chaw nyob hauv is taws nem yuav tsum tau tuav kom nkag mus rau koj SERVER los ntawm Is Taws Nem. Tam sim no tsuas yog IP hosting kev pabcuam txhawb nqa yog muab los ntawm DynDNS (https://dyn.com)

1. Siv DDNS - Ua kom muaj kev pabcuam no.
2. DDNS Kev Pabcuam - Xaiv ib qho kev pabcuam los ntawm lub thawv poob. Tam sim no tsuas yog kev pabcuam txhawb nqa yog DynDNS
3.  Tus neeg siv lub npe - Qhov no yog hais txog tus account teeb tsa ntawm DDNS Service.
4. Tus password - Tus password rau kev nkag mus ntawm DDNS qhov kev pabcuam.
5. Lub party - Qhov no yog lub npe IP sau npe ntawm DDNS qhov kev pabcuam rau rerouting rau qhov SERVER

Email Teeb Page
Teeb tus email account rau SERVER siv los xa email los ntawm ntau lub modules. Nkag mus rau nplooj ntawv no los ntawm Configure tab.
Nco tseg: Chav tsev no tsis sib xws nrog SSL / TLS, muaj 3rd tog SMTP xa cov servers uas tsis tas yuav SSL thiab siv tau. Rau cov lus qhia yuav ua li cas siv 3rd tog SMTP kev xa khoom, thov xa mus rau Daim Ntawv Ntxiv 1 ntawm qhov kawg ntawm phau ntawv no).

1. SMTP Server - Nkag mus rau tus xa ntawv xa tawm uas koj xav siv.
2. Chaw nres nkoj - Qhov no yog qhov chaw nres nkoj ntawm lub server ntawd. Koj tuaj yeem saib koj qhov kev pabcuam xa ntawv online rau cov ntaub ntawv no nrog rau lwm qhov chaw teeb tsa.
3. Siv SSL - Cia nws tsis txheeb xyuas thaum koj siv 3rd tog SMTP server.
4. Tus neeg siv lub npe - Koj lub npe email account.
5. Password – Email account password.
6. Rau Chaw Nyob - Sau txog li 3 qhov chaw nyob rau qhov email teeb tsa no. Tus neeg hais lus, CC thiab BC.
7.  Kawm Subject - Cov kab ntawv ntawm email header.

Network Configuration Page
Nkag mus rau nplooj ntawv no los ntawm Configure dropdown menu. Nplooj ntawv no tso cai rau kev teeb tsa ntawm SERVER lub network teeb tsa.
CEEB TOOM: Kev teeb tsa tsis raug yuav ua rau lub rooj tsavxwm poob kev sib txuas hauv lub network. Txhawm rau nkag mus rau ib lub cuab yeej hauv koj lub network remotely koj yuav tsum PORT lub cuab yeej. Qhov no qhia koj lub router tias cov ntaub ntawv nkag mus yuav tsum raug xa mus rau ib qho khoom siv tshwj xeeb ntawm koj lub network.

1. MAC Chaw Nyob - Qhov no yog qhov tshwj xeeb MAC chaw nyob uas tau muab rau cov khoom no thaum lub sijhawm sib dhos. Nws hloov tsis tau.
2. Lub Npe Lub Npe - Qhov no yog lub npe Netbios uas lub tsev no yuav raug hais nyob rau hauv qee lub network. Nws kuj tseem yuav tshwm sim hauv koj lub router daim ntawv xauj tsev. Nws ua qhov chaw muaj txiaj ntsig rau npe koj SERVER thiab tshwm rau ntawm nplooj ntawv Home thiab ntawm Discoverer.
3. Tus nab npawb chaw nres nkoj - Qhov no dhau los ua ib feem ntawm IP chaw nyob thiab tsim nyog rau kev nkag mus rau Is Taws Nem. Yog tias qhov no tsis tau teeb tsa, SERVER defaults mus rau qhov chaw nres nkoj ntawm 80.
4. IP Chaw Nyob - Feem ntau koj tsuas yog hloov cov pab pawg kawg ntawm tus lej. Yog tias koj hloov qhov chaw nyob IP no nco ntsoov khaws tus IP no ntawm koj lub router thiab tsis muaj lwm yam khoom siv siv qhov chaw nyob IP no lossis koj yuav tsis tuaj yeem ncav cuag SERVER no. Yog tias qhov no tshwm sim koj yuav xav tau Restore Defaults siv txoj kev laub khawm.
5.  Gateway - Feem ntau yog ib lub router ntawm koj lub TCP / IP network uas ua haujlwm rau koj qhov ISP.
6. Subnet Mask - Tus lej 32-ntsis uas npog qhov chaw nyob IP, thiab faib tus IP chaw nyob rau hauv chaw nyob network thiab chaw nyob. Cia li tso nws ntawm 255.255.255.0
7. Primary DNS - Thawj DNS.
8. Secondary DNS - Ib tug thib ob DNS.

IP Range Configuration Nplooj
Nkag mus rau nplooj ntawv no los ntawm Configure dropdown menu. Siv cov chaw ruaj ntseg no los xaiv ntau qhov chaw nyob IP uas yuav tso cai nkag mus rau SERVER.CAUTION: Kev teeb tsa tsis raug tuaj yeem ua rau lub rooj tsavxwm poob kev sib txuas. Tsis siv rau ntawm SERVER no.
Tej thaj chaw deb Devices Page
Nkag mus rau nplooj ntawv no los ntawm Configure dropdown menu. Cov kev teeb tsa no tso cai rau SERVER los tswj cov relays ntawm lwm tus SERVER. Qhov no yog ua tiav los ntawm kev xaiv Cov Chaw Taws Teeb Hauv Lub Sijhawm Teem Sijhawm lossis los ntawm kev teeb tsa lub relay ua REMOTE. Muaj 8 qhov chaw nyob REMOTE.
CEEB TOOM: Kev teeb tsa tsis raug yuav ua rau lub rooj tsavxwm poob nws cov chaw taws teeb sib txuas.

1. Ntaus Lub Npe - Sau lub npe ntawv rau lub cuab yeej no rau yav tom ntej siv.
2. IP Chaw Nyob - Tus IP chaw nyob ntawm cov khoom siv nyob deb nroog suav nrog tus lej chaw nres nkoj.
3.  Tus neeg siv lub npe - Siv rau hauv Basic Authentication.
4. Lo lus zais - Siv hauv Basic Authentication.

Kodalert Nplooj
Tseem tsis tau muab coj los siv. Nkag mus rau nplooj ntawv no los ntawm Configure dropdown menu. Kodalert muab qhov interface rau kev ceeb toom ntawm Internet txuas nrog cov khoom siv. Kodalert yog huab raws, qhib lub platform saib xyuas thiab ceeb toom rau Is Taws Nem ntawm Yam hauv koj lub ntiaj teb lub cev. Txhua yam uas tuaj yeem xa email lossis TCP cov lus nrog rau peb cov SERVERS, lwm yam khoom siv thiab cov neeg siv email tuaj yeem siv Kodalert. Nws tuaj yeem ua haujlwm rau ntau qhov chaw nyob deb, ceeb toom ntau tus neeg siv tam sim ntawd siv cov cai koj teeb tsa los ntawm cov ntawv nyeem, email, xov tooj ntse Apps thawb ceeb toom lossis lub tswb nrov tam sim thaum muaj qee yam tshwm sim.

1. Tus lej ceeb toom
2. Kuaj
3. Siv
4.  Txoj cai

Hauv nplooj ntawv ceeb toom ceeb toom, koj tuaj yeem hloov lub xeev (on / off) ntawm relay los ntawm nias lub voj voog ntsuab hauv lub xeev kem. Thawb lub EDIT icon hloov lub tswb qhov chaw.

Specifications

FARGO R8G2

• 10M / 100M RJ45 Internet interface nrog kev sib txuas thiab kev ua haujlwm LEDs
• 8 Relay outputs, 1FORMC 48 Volt Max (24VAC / DC 3A)
• Cov xwm txheej LEDs (pulse, bootloader, thiab nrhiav)
• Ethernet Bootloader (rau server hardware code upgrade)
• PoE los yog 12VDC @ 500mA (nominal)
• Web interface w/basic authentication
• On board kub sensor thiab voltage ua sensor
  Pib dua / Nrhiav lub laub khawm (xiav LED)
• Ua haujlwm kub ntawm 0 txog +70 ℃
• Cia kub ntawm 40 txog +125 ℃
• Humidity ntawm 10% mus rau 80% noncondensing
• Dimensions 74mm x 100mm x 20mm, mounting qhov 64mm x 92mm Ф 3.2mm 4 qhov chaw
• Txhawb Cov Txheej Txheem: HTTP / SMTP / SNTP

FARGO R4G2

• 10M / 100M RJ45 Internet interface nrog kev sib txuas thiab kev ua haujlwm LEDs
• 4 1FormC relays 48 Volt Max (24VAC / DC 3A)
• 2 optically cais cov inputs, 12V 1mA lossis rub down hloov xaiv, 2 tus neeg xyuas pib ntsia hlau davhlau ya nyob twg txuas rau txhua tus.
• 2 Analog 0-5VDC Inputs 30mA 3.3VDC fais fab mov PTC tiv thaiv. 3 tus neeg xyuas pib ntsia hlau davhlau ya nyob twg connectors rau txhua tus (3.3VDC, input, hauv av) (R4ADI nkaus xwb)
• 2 Tam sim no sensor inputs. 3.5mm stereo jack connector rau txhua tus (R4ADI nkaus xwb)
• Cov xwm txheej LEDs (pulse, bootloader, thiab nrhiav)
• Ethernet Bootloader (rau server hardware code upgrade
• POE lossis 12VDC @ 500mA (nominal)
• Web interface w/basic authentication
• On board kub sensor thiab voltage ua sensor
• Pib dua / Nrhiav lub pob nyem
• Ua haujlwm kub ntawm 0 txog +70 ℃
• Cia kub ntawm 40 txog +125 ℃
• Humidity ntawm 10% mus rau 80% noncondensing
• Dimensions 74mm x 100mm x 20mm, mounting qhov 64mm x 92mm Ф 3.2mm 4 qhov chaw
• Txhawb Cov Txheej Txheem: HTTP / SMTP / SNTP

TSI 100

• 10M / 100M RJ45 Internet interface nrog kev sib txuas thiab kev ua haujlwm LEDs
• 2 1-Form-A relay 48VAC@8A Max
• 2 optically cais cov inputs, 12V 1mA lossis rub down hloov xaiv
• Cov xwm txheej LEDs (pulse, bootloader, thiab nrhiav)
• Ethernet Bootloader (rau server hardware code upgrade)
• POE lossis 12VDC @ 500mA (nominal)
• Web interface w/basic authentication
•  On board kub sensor thiab voltage ua sensor
• Pib dua / Nrhiav Pushbutton (xiav LED)
• Ua haujlwm kub ntawm 0 txog +70 ℃
• Cia kub ntawm 40 txog +125 ℃
• Humidity ntawm 10% mus rau 80% noncondensing
• Loj: 70mm x 100mm x 25mm
• Txhawb Cov Txheej Txheem: HTTP / SMTP / SNTP

KOB 200

• 10M / 100M RJ45 Internet interface nrog kev sib txuas thiab kev ua haujlwm LEDs
• 4 1FormA relays 48 Volt Max 1A tiv tauj qhuav lossis tsav 10V ± 10% 50mA rau cov khoom siv sab nraud
• 2 optically cais cov inputs, 12V 1mA lossis rub down hloov xaiv
• Cov xwm txheej LEDs (pulse, bootloader, thiab nrhiav)
• Ethernet Bootloader (rau server hardware code upgrade)
• POE lossis 12VDC @ 500mA (nominal)
• Web interface w/basic authentication
• On board kub sensor thiab voltage ua sensor
• Pib dua / Nrhiav Pushbutton (xiav LED)
• Ua haujlwm kub ntawm 0 txog +70 ℃
• Cia kub ntawm 40 txog +125 ℃
• Humidity ntawm 10% mus rau 80% noncondensing
• Loj: 70mm x 100mm x 25mm
•  Txhawb Cov Txheej Txheem: HTTP / SMTP / SNTP

Board Reference Layout

Fargo R8

1. 8 Relay outputs, 1FORMC 48 Volt Max (24VAC / DC 3A)
2. Rj45 Connector
3. Fais fab Connector (12VDC)
4. Pib dua khawm
5. Nrhiav khawm

Fargo R4

1. 3.5mm Inputs rau AC Tam sim no Sensor (R4ADI nkaus xwb)
2. Analog Inputs (R4ADI nkaus xwb)
3. 4 Relay outputs, 1FORMC 48 Volt Max (24VAC / DC 3A)
4. Digital Inputs
5. Digital Input Switches (Input 1 ntawm sab xis.
   Up: Pullup, Down: cais)
6.  Rj45 Connector
7. Pib dua khawm
8. Nrhiav khawm
9.  Fais fab Connector (12VDC)

Koda 100

1. Digital Inputs (# 1 ntawm sab laug) 5VDC-48VDC (12VDC-48VDC yuav tsum siv cov resistor sab nraud)
2. Relay Outputs (#1 nyob rau sab xis) 8A @ 48VAC Max
3. Digital Input Switches (IN 1 ntawm sab laug. UP: cais, Down: Pullup)
4. Pib dua khawm
5. Reload Button (tig rau xiav LED - txheeb xyuas ntawm Discoverer)
6. Rj45 Connector
7. Fais fab Connector (12VDC)
8. USB Mini Connector rau Kub / Humidity Sensor (muag nyias)

Koda 200

1. Digital Inputs (# 1 ntawm sab laug) 5VDC-48VDC (12VDC-48VDC yuav tsum siv cov resistor sab nraud)
2. Relay Outputs (# 1 nyob rau sab laug) 48 Volt Max 1A qhuav hu lossis tsav 10V ± 10% 50mA
3. Digital Input Switches (IN 1 ntawm sab laug. UP: cais, Down: Pullup)
4.  Relay Switches (Up rau qhuav hu, down rau 10V / 50mA)
5. Pib dua khawm
6.  Reload Button (tig rau xiav LED - txheeb xyuas ntawm Discoverer)
7. Rj45 Connector
8.  Fais fab Connector (12VDC)
9. USB Mini Connector rau Kub / Humidity Sensor (muag nyias)

Factory Reset
Txhawm rau ua lub Hoobkas Pib dua, nias lub pob Pib dua. Thaum lub teeb ntsuab LED tig rau, thawb thiab tuav lub khawm Reload kom txog thaum lub teeb liab liab LED tig tawm thiab tom qab ntawd tig rau khoom. Xa mus rau Board Reference Layout seem rau qhov chaw khawm ntawm koj lub cuab yeej.

Cov neeg siv phau ntawv no ntxiv cov ntaub ntawv rau Linortek cov khoom hauv qab no:

• Netbell-2
• Netbell-8
• Netbell-K (thiab variants)
• iTrixx-NHM

Yog xav paub ntxiv, cov ntaub ntawv thiab yuav ua li cas-rau video, mus saib https://www.linortek.com/downloads/
Cov ntaub ntawv no tuaj yeem nrhiav tau ntawm www.linortek.com/downloads/documentations/
Yog tias koj xav tau kev pab nrog koj lub cuab yeej thov mus saib www.linortek.com/technical-support
Linor Technology, Inc.
Cov ntaub ntawv raug hloov pauv yam tsis tau ceeb toom.

Cov ntawv ntxiv 1

Yuav Ua Li Cas Xa SSL Emails Siv 3rd Party SMTP Kev Pabcuam rau Linortek Fargo thiab Koda Devices
Los ntawm lub neej ntawd, Koda / Fargo li siv tsis yog SSL SMTP email servers. Tab sis feem ntau ntawm email servers hnub no tau hloov mus rau SSL kev ruaj ntseg raws tu qauv, muaj 3rd tog SMTP xa cov servers uas tsis tas yuav SSL thiab siv tau. Muaj ntau SMTP email chaw muab kev pabcuam hauv khw. Peb siv SMTP2GO ua tus example los ua qauv qhia kev teeb tsa. SMTP2GO yog pub dawb rau siv nrog txog 1000 emails / hli. Txhawm rau siv SMTP2GO, thov mus saib: https://www.smtp2go.com/ .
Kauj ruam 1. Tsim tus account SMTP2GO.
Txhawm rau tsim ib tus account tsuas yog nyem rau ntawm "Sau npe", xaiv "1K Emails" ntawm qhov ntsuas, thiab xaiv "Daim phiaj xwm pub dawb" (Yog tias koj xav tau xa ntau dua 1000 email hauv ib hlis, xaiv txoj kev npaj ua raws li koj xav tau.)

Txhawm rau tsim ib tus account ntawm SMTP2GO, tus neeg siv email chaw nyob yuav xav tau. Kev pabcuam email dawb xws li Gmail lossis Yahoo yuav tsis cia koj mus ntxiv. Tom qab qhib koj tus account SMTP2GO, koj yuav tsum ntxiv ib tus neeg siv.
Kauj ruam 2. Ntxiv ib tug neeg siv.
Tus neeg siv koj tsim ntawm SMTP2GO, yuav yog tus xa ntawv xa tawm thaum koj teeb tsa Fargo / Koda ntaus ntawv xa email ceeb toom, thov xyuas kom koj lub tuam txhab email server yuav tsis thaiv cov email yog tias koj siv email dawb xws li Yahoo lossis Gmail rau ntxiv tus neeg siv ntawm no.
Nkag mus rau koj tus account SMTP2GO, nyob rau sab laug zaub mov xaiv "Settings" > "SMTP Cov Neeg Siv", Nyem rau "Ntxiv SMTP neeg siv" thiab sau daim ntawv.

Tom qab tus neeg siv tau ntxiv rau koj tus lej SMTP2GO, nws yuav tso tawm cov ntaub ntawv koj xav tau teeb tsa email ceeb toom ntawm koj cov khoom siv Fargo / Koda.

Kauj ruam 3. Kho lub Linortek ntaus ntawv.
Tom qab koj tsim ib tus account thiab ntxiv tus neeg siv, nkag mus rau koj lub cuab yeej Linortek, mus rau Configure - Email teeb nplooj ntawv teeb tsa Email ceeb toom:

• SMTP Server - Nkag mus rau tus xa ntawv xa tawm uas koj xav siv, nws yog mail.smtp2go.com hauv peb tus example.
• Chaw nres nkoj - Qhov no yog qhov chaw nres nkoj ntawm lub server ntawd. Qhov chaw nres nkoj SMTP yog 2525 hauv peb tus example.
• Siv SSL - Cia nws tsis txheeb xyuas thaum koj siv 3rd tog SMTP server.
• Tus neeg siv lub npe - Tus neeg siv lub npe los ntawm SMTP2GO thaum peb tsim ib tus neeg siv hauv cov kauj ruam dhau los.
• Password – Tus neeg siv tus password los ntawm SMTP2GO thaum peb tsim ib tus neeg siv hauv cov kauj ruam dhau los.
• Rau Chaw Nyob - Nkag mus txog 3 qhov chaw nyob rau qhov email teeb tsa no. Tus neeg hais lus, CC thiab BC.
• Kawm Subject - Cov kab ntawv ntawm email header.
  

Thaum koj ntaus "Txuag/Test", lub cuab yeej cia li xa email kuaj. Thov kos Junk/Lwm cov ntawv tais ceev tseg kom pom nws yog tias nws tsis nyob hauv Inbox folder.
Kauj ruam 4. Teem lub luag hauj lwm rau tsis siv neeg Email ceeb toom.
Koj yuav tsum tau txais email ceeb toom rau ntau yam xwm txheej los ntawm Fargo / Koda boards ntawm lub sijhawm no. Yog tias koj xav tau txais cov ntawv ceeb toom xwm txheej, koj tuaj yeem siv peb qhov xwm txheej logic teeb tsa los teeb tsa cov ntawv tshaj tawm. Txhawm rau teeb tsa cov lus ceeb toom ntawm qhov xwm txheej, mus rau nplooj ntawv Ua Haujlwm ntawm koj lub cuab yeej Fargo / Koda, nyem qhov Kho kom raug lub cim ntawm lub sijhawm. Yog xav paub meej txog yuav ua li cas los tsim ib qho kev tshwm sim raws li kev xav, thov xa mus rau Teem Sijhawm Nplooj Ntawv ntawm Fargo / Koda Tus Neeg Siv Phau Ntawv Qhia, uas tuaj yeem rub tawm ntawm no:
https://www.linortek.com/download/fargo%20g2_koda%20downloads/fargo%20g2_koda%20documentation/Fargo-G2-and-Koda-User-Manual.pdf
Hauv qhov no sample Peb yuav siv Network Teev Meter ntaus ntawv ua tus example rau yuav ua li cas thiaj tau txais email ceeb toom txhua hnub thaum 11:52 teev sawv ntxov.

Thaum tag nrho cov xwm txheej ntawm txoj haujlwm tau ua tiav, koj tau txais email hauv qab no:

Teev Kev Nyeem Ntawv
support@linortek.com
4.11.2022 11:52 TSİ
Hu rau: Liyu Nalven
HM 1, kuv lub tshuab, nyob ntawm 000242.01 teev.
Teb Forward

Cov ntaub ntawv / Cov ntaub ntawv

LINORTEK Fargo G2 TCP/IP Web Raws li Relay Controller [ua pdf] Tus neeg siv phau ntawv Fargo G2, Koda, Fargo G2 TCP-IP Web Raws li Relay Controller, Web Raws li Relay Controller, Raws li Relay Controller, Relay Controller

Cov ntaub ntawv

• Cov neeg siv phau ntawv