Fargo G2 da Manual mai amfani na Koda
www.linortek.comFargo G2, Koda
TCP/IP Web Tushen Mai Kula da Relay
Rev C 04/2022

Fargo G2 TCP/IP Web Tushen Mai Kula da Relay

Na gode don siyan Linortek Fargo G2 ko Koda TCP/IP Controller. Akwai na'urori da yawa waɗanda FARGO/KODA za su iya sarrafa su Web Mai Kula da Relay FARGO/KODA Web Ana iya amfani da mai sarrafawa a cikin irin waɗannan aikace-aikace kamar (amma ba'a iyakance ga): Haske, tsaro, tsarin yayyafawa, ikon samun dama, kayan aikin masana'antu, aikin gini, HVAC, da ƙari mai yawa. Da fatan za a koma zuwa Tsarin Maganar Hukumar a shafi na 29 don shigarwa da ƙayyadaddun fitarwa akan mai sarrafa ku don tabbatar da sun dace da buƙatun ku.

Wannan littafin ya ƙunshi:

• Farashin R8 G2
• FARGO R4DI G2
• FARGO R4ADI G2
• KODA 100
• KODA200

Wadannan za a kira su da SERVER nan gaba. Lokacin da akwai bambance-bambance ko ƙarin fasali za a lura da su a cikin rubutu.
Don bidiyoyin koyarwa, FAQ's da bayanin tuntuɓar ƙungiyar tallafin fasaha, da fatan za a ziyarci: https://www.linortek.com/technical-support

Garanti na SHEKARU DAYA LINORTEK

Dokokin mabukaci: Ga masu amfani waɗanda dokokin kariya ko ƙa'idodi suka rufe su a ƙasarsu ta zama ("Dokar Masu amfani"), fa'idodin da aka bayar a cikin wannan Garanti mai iyaka na Shekara ɗaya na Linortek ("Warranty Linortek Limited") ƙari ne kuma ba a maimakon haƙƙoƙin da Dokar Kasuwanci ta bayar kuma baya ware, iyakance ko dakatar da haƙƙoƙin ku da suka taso daga Dokar Abokan ciniki. Ya kamata ku tuntubi hukumomin da suka dace a ƙasar ku don ƙarin bayani game da waɗannan haƙƙoƙin
Sharuɗɗan garanti na Linortek na wannan kayan masarufi (“Samfur”) sun iyakance ga sharuɗɗan da aka tsara a ƙasa:
Linor Technology, Inc. ("Linortek") yana ba da garantin wannan samfur ga lahani a cikin kayan aiki da aiki na tsawon SHEKARU DAYA (1) daga ranar siyan siyarwa ta ainihin mai siye mai amfani ("Lokacin Garanti") lokacin amfani da shi daidai da umarnin aiki. Ana buƙatar kwafin rasidin dillali a matsayin shaidar sayan. Idan wani lahani na hardware ya taso kuma an karɓi ingantaccen da'awar a cikin Lokacin Garanti, a zaɓinsa kuma gwargwadon izinin doka, Linortek ko dai (1) zai gyara lahanin kayan masarufi ba tare da caji ba, ta amfani da sabbin kayan maye ko gyara, (2) musanya samfur ɗin tare da sabon samfuri ko wanda aka ƙera shi daga sabo ko sassa da aka yi amfani da shi kuma aƙalla daidai da samfurin aiki, ko kuma daidai da abin da aka saya. Lokacin da aka ba da kuɗi, samfurin da aka bayar da kuɗin dole ne a mayar da shi zuwa Linortek kuma ya zama mallakin Linortek.
Garanti na baya yana ƙarƙashin iƙirarin rubutacciyar gaggawar mai siye (i) da (ii) tanadin kan lokaci ga Linortek na damar dubawa da gwada samfurin da ake da'awar rashin lahani. Irin wannan binciken na iya kasancewa akan wuraren mai siye da/ko Linortek na iya buƙatar dawo da samfur a kuɗin mai siye. Koyaya, Linortek bazai da alhakin tattarawa, dubawa, ko farashin aiki dangane da dawowar samfur. Babu samfurin da za'a karɓa don sabis na garanti wanda baya tare da lambar Izinin Kasuwancin Komawa (RMA#) wanda Linortek ya bayar.
BAYANI DA IYAKA
Wannan Garanti mai iyaka ya keɓance lalacewa ta hanyar zagi, rashin amfani, sakaci, wuta ko wasu dalilai na waje, haɗari, gyare-gyare, gyare-gyare ko wasu dalilai waɗanda basu da lahani a cikin kayan aiki da aiki. Software da Linortek ya rarraba tare da ko ba tare da sunan alamar Linortek wanda ya haɗa da, amma ba'a iyakance ga software na tsari ("Software") ba a ƙarƙashin wannan Garanti mai iyaka. Amfani da ku da haƙƙoƙin da ke da alaƙa da Software suna ƙarƙashin Yarjejeniyar Lasisi na Ƙarshen Mai Amfani da Linortek wanda zaku iya samu anan: https://www.linortek.com/end-user-licenseagreement/. Linortek ba shi da alhakin lalacewar da ta taso daga rashin bin umarnin da ya shafi amfanin samfurin. Don tabbatar da daidaituwa tare da iyakokin aiki, mai siye ya kamata ya koma zuwa littafin koyarwa [wanda aka bayar tare da samfurin]. Ba a haɗa batura a cikin Garanti.
ZUWA MATSALAR IYAKA, WANNAN GORANTI IYAKA DA MAGANGANUN NAN DA KE SAMA KENAN BANE DA MAGANGANUN DUKKAN SAURAN GARANTI, MAGANGANUN , DA SHARADI, DA LINORTEK NA MUSAMMAN, BABBAN BAYANI TO, GARANTIN SAUKI, KWANTA DON MUSAMMAN MANUFA, RA'AYI. IDAN HAR BAZA IYA BAYYANA IRIN WANNAN GARANTIN BA, DUK IRIN WADANNAN GARANTIN, ZUWA WANDA DOKA TA YARDA, A IYA IYAKA A LOKACIN GARANTIN LINORTEK ANA IYA IYAKA MAGANIN DON GYARAWA, A CIKIN HANKALINSA KADAI. WASU JIHOHI (KASASHE DA LArduna) BASA YARDA IYAKA KAN IYAKA DODO WARRANTI KO SHARI'A ZAI WUCE, DON HAKA IYAKA DA AKA BAYYANA A SAMA BA ZA SU AIKATA GAREKA BA. WANNAN GARANTIN YANA BAKA MAKA TAUSAMMAN HAKKOKIN SHARI'A, KUMA KANA IYA SAMU WASU HAKKOKIN DA SAURAN JIHA ZUWA JAHA (KO TA KASA KO Lardi). WANNAN GARANTI MAI IYAKA ANA GIRMA DA KUMA GIRINTA A KAN Dokokin Amurka.
Karyatawa

1. Karanta Umarni – Karanta duk aminci da umarnin aiki kafin aiki da samfurin.
2. Riƙe Umarnin – Riƙe aminci da umarnin aiki don tunani na gaba.
3. Gargadin Saurara – Riƙe duk gargaɗin akan samfur da cikin umarnin aiki.
4. Bi umarnin – Bi duk aiki kuma yi amfani da umarnin.
5. Tsaftacewa - Cire samfurin daga wuta kafin tsaftacewa. Kada a yi amfani da masu tsabtace ruwa ko masu tsabtace iska. Yi amfani da tallaamp zane don tsaftacewa kawai.
6. Haɗe-haɗe-Kada a yi amfani da haɗe-haɗe sai dai idan Linortek ya ba da shawarar su musamman. Yin amfani da haɗe-haɗe marasa jituwa ko in ba haka ba na iya zama haɗari.
7. Na'urorin haɗi - Kar a sanya wannan samfur a kan madaidaicin tsayayye, mai saukowa, sashi, ko dutse. Samfurin na iya faɗuwa, yana haifar da mummunan rauni ga mutum da mummunar lalacewa ga samfurin. Yi amfani kawai tare da tashoshi, uku, sashi, ko dutsen da masana'anta suka ba da shawarar, ko aka sayar tare da samfurin. Bi umarnin masana'anta lokacin hawa samfurin, kuma yi amfani da na'urorin haɗi kawai wanda masana'anta suka ba da shawarar. Yi hankali yayin amfani da haɗin na'ura da cart. Tsayawa mai sauri, wuce gona da iri, da saman ƙasa mara daidaituwa na iya haifar da haɗin na'ura da keken hannu don juyewa.
8.  Samun iska - Buɗewa a cikin shinge, idan akwai, ana ba da shi don samun iska da kuma tabbatar da ingantaccen aiki na samfurin kuma don kare shi daga zafi. Kar a toshe ko rufe waɗannan buɗewar. Kar a sanya wannan samfurin a cikin ginanniyar shigarwa sai dai idan an samar da iskar da ta dace ko kuma an bi umarnin Linortek.
9. Tushen wutan lantarki – Yi aiki da wannan samfur daga nau'in tushen wutar lantarki da aka nuna a cikin jagorar koyarwa ko akan alamar samfur.
   Idan ba ku da tabbacin nau'in samar da wutar lantarki da kuke shirin amfani da shi, tuntuɓi dillalin kayan aikin ku ko kamfanin wutar lantarki na gida - in dai har yin amfani da kowane nau'in tushen wutar lantarki banda wanda aka nuna a cikin littafin koyarwa ko alamar alama zai ɓata kowane garanti. Don samfuran da aka yi nufin yin aiki daga ƙarfin baturi, ko wasu hanyoyin, koma zuwa umarnin aiki [haɗe da samfurin].
10. Grounding ko Polarization - Wannan samfurin na iya zama sanye take da filogin layi na yau da kullun (fulogi mai faffaɗa ɗaya fiye da ɗayan). Wannan filogi zai shiga cikin wutar lantarki ta hanya ɗaya kawai. Wannan siffa ce ta aminci. Idan ba za ku iya saka filogi cikakke a cikin mashin ba, gwada juya filogin. Idan har yanzu filogin ya kasa dacewa da ita saboda hanyar sadarwar ku ba ta dace da filogin ba. Tuntuɓi ma'aikacin wutar lantarki don maye gurbin kanti da wanda ya dace. Kar a tilasta filogin ya shiga cikin madaidaicin madaidaicin ko in ba haka ba kokarin kayar da manufar aminci na filogin. A madadin, wannan samfurin na iya zama sanye take da filogi mai nau'in ƙasa mai nau'in waya 3, filogi yana da fil na uku (ƙasa). Wannan filogi zai dace ne kawai a cikin tashar wutar lantarki irin ta ƙasa. Wannan siffa ce ta aminci. Kar a tilasta filogin ya shiga cikin madaidaicin madaidaicin ko in ba haka ba kokarin kayar da manufar aminci na filogin. Idan hanyar sadarwar ku ba ta dace da filogi ba, tuntuɓi mai ba da wutar lantarki don maye gurbin kanti da wanda ya dace.
11. Kariyar Igiyar Wutar Lantarki - Hanyar da igiyoyin samar da wutar lantarki ta yadda ba za a iya tafiya a kai ko dunƙule su ta abubuwan da aka sanya a kansu ko a kansu ba, ba da kulawa ta musamman ga igiyoyi da matosai, ɗakunan ajiya masu dacewa, da wurin da igiyoyin ke fita daga na'urar. .
12.  Layin Wutar Lantarki - Kada a sanya tsarin waje a ko'ina a kusa da layukan wutar lantarki na sama ko sauran hasken lantarki ko da'irar wutar lantarki, ko kuma inda zai iya fada cikin irin waɗannan layukan wuta ko da'irori. Lokacin shigar da tsarin waje, yi amfani da kulawa mai zurfi don kiyayewa daga taɓa irin waɗannan layukan wutar lantarki ko da'irori saboda haɗuwa da su na iya zama m.
13. Wuce-yawace-Kada a yi lodin kantuna da igiyoyi masu tsawo saboda hakan na iya haifar da gobara ko girgiza wutar lantarki.
14. Abu da Shigar Ruwa - Kada a taɓa tura abubuwa kowane iri cikin wannan samfur ta hanyar buɗewa saboda suna iya taɓa volts mai haɗari.tage maki ko gajerun sassan da zasu iya haifar da gobara ko wutar lantarki. Kada a taɓa zubar da ruwa kowane iri akan samfurin.
15.  Hidima – Kada kayi ƙoƙarin yin hidima ga wannan samfur da kanka saboda buɗewa ko cire murfin na iya fallasa ka ga voltage ko wasu hadura. Koma duk sabis na samfurin zuwa Linortek.
16. Lalacewar Sabis na Buƙatar - Cire samfurin daga kanti kuma koma sabis zuwa Tallafin Abokin Ciniki na Linortek ƙarƙashin sharuɗɗan masu zuwa:
    a. Lokacin da igiyar samar da wutar lantarki ko filogi ta lalace.
    b. Idan ruwa ya zube, ko abubuwa sun fada jikin samfurin.
    c. Idan samfurin ya kasance yana fuskantar ruwan sama ko ruwa.
    d. Idan samfurin baya aiki akai-akai ta bin umarnin aiki [an haɗa da samfurin]. Daidaita waɗancan abubuwan sarrafawa waɗanda umarnin aiki ke rufewa kawai, saboda daidaitaccen daidaitawa na sauran abubuwan sarrafawa na iya haifar da lalacewa kuma galibi yana buƙatar babban aiki ta ƙwararren masani don maido da samfurin zuwa aikinsa na yau da kullun.
    e. Idan kayan da aka jefa ko kuma majalisar minista ta lalace.
    f. Idan samfurin ya nuna canji na musamman a aikin.
17. Sassan Sauyawa - Idan abubuwan maye suna da mahimmanci, sami Low-Voltage Ma'aikacin Wutar Lantarki ya maye gurbinsu ta amfani da sashi kawai wanda masana'anta suka ƙayyade. Sauye-sauye mara izini na iya haifar da wuta, girgiza wutar lantarki ko wasu haɗari. Ana iya samun sassan maye a https://www.linortek.com/store/
18. Duban Tsaro - Bayan kammala kowane sabis ko gyare-gyare ga wannan samfur, tambayi ma'aikacin sabis ya yi binciken aminci don sanin cewa samfurin yana cikin yanayin aiki mai kyau.
19.  Coax Grounding - Idan an haɗa tsarin kebul na waje zuwa samfurin, tabbatar cewa tsarin kebul ɗin yana ƙasa. Samfuran Amurka kawai - Sashe na 810 na Lambar Lantarki ta Kasa, ANSI / NFPA No.70-1981, yana ba da bayanai game da shimfidar ƙasa mai kyau na dutsen da tsarin tallafi, ƙaddamar da coax zuwa samfurin fitarwa, girman masu jagoranci na ƙasa, wuri na fitar da samfur, haɗi zuwa grounding lantarki, da kuma bukatun ga grounding lantarki.
20.  Walƙiya - Don ƙarin kariya na wannan samfurin yayin guguwar walƙiya, ko kafin barin shi ba tare da kulawa ba kuma ba a amfani dashi na dogon lokaci, cire shi daga bangon bango kuma cire haɗin tsarin kebul. Wannan zai hana lalacewa ga samfurin saboda walƙiya da hawan wutar lantarki.
21.  Amfani da waje - Wannan samfurin baya hana ruwa kuma bai kamata a bar shi ya jika ba. Kada a fallasa ga ruwan sama ko wasu nau'ikan ruwa.
    Kar a bar waje da daddare saboda yana iya faruwa.
22.  Yayin canza batura, fis ko sarrafa samfurin matakin allo yi hankali da fitarwar lantarki wanda zai iya lalata na'urorin lantarki. Zai fi kyau a yi amfani da benci na sabis na lantarki. Idan babu wannan zaka iya sallama da kanka ta hanyar taɓa kayan ƙarfe ko bututu. Yayin canza baturi ko fuses kar a taɓa i) kowace wayoyi ban da wayoyi na baturi da ii) allon da aka buga.

IYAKA NA HAKURI
BABU ABUBUWAN DA FASSARAR LINOR BA ZA TA IYA DOKA BA, KO A HANGADI, AZABA, KO WANI HAKA, GA DUK WANI LALACEWA, NA MUSAMMAN, GASKIYA, SABODA HAKA KO HUKUNCI, HADA, AMMA BAI IYA IYAKA BA, WANDA YA YI MANA IYAKA, RASHIN DADI, RASHIN SANA'A, KO RASHIN RIBA, ARZIKI, KO SAMUN SAMUN SAMUN CIKAKKEN IRIN WANNAN DOKA na iya toshe su. RA'AYIN KARATUN MUSULMI
Ba a yi nufin wannan samfurin ko izini don samfurin tallafin rayuwa ko don wasu amfani waɗanda gazawa na iya haifar da rauni ko mutuwa ba. Idan ku ko abokan cinikin ku kuna amfani da ko ba da izinin amfani da wannan samfur don irin wannan amfani mara niyya ko mara izini, kun yarda da cikakken ba da lamuni ga Fasahar Linor da abokan haɗin gwiwa, da jami'ai, ma'aikata da masu rarraba kowane, daga duk abin alhaki mai alaƙa da irin wannan amfani, gami da kuɗin lauyoyi da farashi.
KARIN SANARWA DON IYAKAR AMFANI
Sai dai in an fayyace ta musamman, samfuran mu ba a tsara su don sauya layi voltage (110V da sama) na'urori. Don sarrafa na'urar da ke aiki a layi voltagDOLE ƙwararren ma'aikacin lantarki dole ne ya shigar da na'urar tsaka-tsaki kamar relay. Lokacin zabar na'urori don sarrafawa, yana da kyau a zaɓi ƙaramin voltage sarrafawa kamar 24VAC solenoid zuwa sarrafa kwararar ruwa. ƙwararrun masu lantarki ne kawai za su iya yin waya da voltage na'urar. Bugu da ƙari, dole ne a bi lambobin gida ciki har da amma ba'a iyakance ga girman ma'aunin waya da gidaje masu dacewa ba. Linortek ba shi da alhakin cutarwa ga mai amfani ko ɓangarori na uku don yin amfani da samfuranmu ba daidai ba. Wannan alhaki ya kasance tare da mai amfani. Linortek ba shi da alhakin lalacewar na'urar saboda rashin amfani da samfuran mu ba daidai ba.
SAURARA VOLTAGE BAYANI
Da fatan za a yi taka tsantsan lokacin haɗa na'urori zuwa na'urorin lantarki ko wasu kayan aiki. Wannan web BA a ƙera mai sarrafawa don haɗawa da kowane voltage fiye da 48V. Yin amfani da wannan tsari, ya kamata ya ba ku damar sarrafa komai. Yana da mahimmanci ka yi amfani da masu aikin lantarki masu lasisi kuma ka bi lambobin lantarki waɗanda suka dace da wurinka. Waɗannan lambobin suna wanzu don amincin ku, da kuma amincin wasu. Linortek ba shi da alhakin kowane lahani ko lalacewa sakamakon gazawar bin dokokin gida, farillai ko ƙa'idodi ko gazawar bin ƙayyadaddun umarni don shigarwa da amfani da samfur.

Yarjejeniyar Lasisi na Ƙarshen Mai Amfani don Linortek Software da Takardu

Wannan Yarjejeniyar Lasisi ta Ƙarshen Mai Amfani ("EULA") yarjejeniya ce ta doka tsakanin ku (mutum ko ɗaya) da Linor Technology, Inc. ("Linortek" ko "mu" ko "mu") wanda ke tafiyar da amfanin ku na software. da takaddun ("Software") da ke cikin ko alaƙa da Fargo, Koda, Netbell, IoTMeter, da jerin samfuran iTrixx ("Kayayyakin Linortek").
Wannan EULA ba ta sarrafa amfanin ku na Linortek website ko samfuran Linortek (ban da software). Amfanin ku na Linortek webLinortek ne ke tafiyar da rukunin yanar gizon webSharuɗɗan sabis na rukunin yanar gizo da manufofin keɓantawa na Linortek waɗanda za a iya samu a:
http://www.linortek.com/terms-and-conditions [Sayen ku na samfuran Linortek (ban da Software) ana sarrafa shi ta garantin iyaka na Linortek, wanda za'a iya samu a https://www.linortek.com/linortek-one-year-limited-warranty/
Wannan EULA tana sarrafa damar ku da amfani da software. Wannan EULA tana ba ku takamaiman haƙƙoƙin doka, kuma kuna iya samun wasu haƙƙoƙin doka ƙari, waɗanda suka bambanta daga hurumi zuwa hurumi. Ƙarfafawa, keɓancewa, da iyakokin abin alhaki ƙarƙashin
wannan EULA ba zai yi amfani da iyakar da aka haramta ko iyakance ta hanyar da ta dace ba. Wasu hukunce-hukuncen ba sa ba da izinin keɓance garanti mai ma'ana ko keɓancewa ko iyakance ga lalacewa ko lalacewa ko wasu haƙƙoƙi, don haka waɗannan tanade-tanaden wannan EULA ba za su shafi ku ba.
Ta hanyar shigarwa, samun dama, kwafi da/ko amfani da software ko takaddun da kuke yarda da sharuɗɗa da sharuɗɗan wannan EULA a madadin kanku ko mahaɗan da kuke wakilta dangane da irin wannan shigarwa, samun dama, kwafi da/ko amfani. Kuna wakilta da ba da garantin cewa (i) kuna da haƙƙi, iko, da iyawa don karɓa da yarda da sharuɗɗan wannan EULA a madadin kanku ko ƙungiyar da kuke wakilta (ii) kun isa shekarun shari'a a cikin ikon ku na zama. , (iii) ba ka cikin ƙasar da ke ƙarƙashin takunkumin gwamnatin Amurka, ko kuma wacce gwamnatin Amurka ta ayyana a matsayin ƙasa mai tallafawa 'yan ta'adda; da (ii) ba a jera ku a cikin kowane jerin abubuwan da gwamnatin Amurka ta haramta ko ƙuntatawa ba.
Idan ba kwa son ɗaure ku da sharuɗɗan wannan EULA ba za ku iya shigarwa, samun dama, kwafi ko amfani da software ta kowace hanya (ko an riga an shigar da ku akan na'urar da kuka saya).

1. Izinin Amfani da Lasisin Software/ Software.
   Dangane da sharuɗɗan wannan EULA, Linortek yana ba ku iyakance, mai iya sokewa, ba keɓantacce, wanda ba a iya jujjuya shi ba, haƙƙi mara canzawa da lasisi zuwa (a) zazzagewa, shigar da aiwatar da kwafin software ɗaya, a cikin sigar lambar abu mai aiwatarwa. kawai, kawai akan Samfurin Linortek wanda ka mallaka ko sarrafawa da (b) amfani da software kawai dangane da Samfurin Linortek daidai da niyyar amfani da shi kamar yadda aka bayyana akan Linortek website (kowane na 1 (a) da 1 (b) "Amfani da Halatta" da kuma "Halatta Amfani").
2. Ƙuntatawa akan Amfanin ku na Software.
   Kun yarda ba, kuma kar ku ƙyale wasu su yi amfani da software don kowace manufa banda Amfani da Izinin da aka kwatanta a Sashe na 1 na sama. Wannan yana nufin, a cikin wasu abubuwa, ƙila ba za ku iya:
   (a) shirya, musanya, gyaggyarawa, daidaitawa, fassara, yin ayyukan da aka samo asali, tarwatsa, juyar da injiniyoyi ko jujjuya duk wani ɓangare na software (sai dai gwargwadon dokokin da suka dace musamman sun haramta irin wannan ƙuntatawa don dalilai na haɗin gwiwa, a cikin abin da kuka yarda da farko tuntuɓar Linortek kuma ba da damar Linortek don ƙirƙirar irin waɗannan canje-canje kamar yadda ake buƙata);
   (b) lasisi, sanyawa, rarraba, watsa, siyarwa, haya, mai masaukin baki, fitarwa, bayyana ko in ba haka ba amfani da software don kowace manufar kasuwanci ko samar da software ga kowane ɓangare na uku;
   (c) ƙyale kowane ɓangare na uku don amfani da software a madadin ko don amfanin kowane ɓangare na uku;
   (d) Yi amfani da kowane yanki na Software akan kowace na'ura ko kwamfuta ban da Samfurin Linortek wanda ka mallaka ko sarrafawa;
   (e) amfani da software ta kowace hanya da ta keta kowace doka ta gida, ta ƙasa ko ta ƙasa da ƙasa; ko
   (f) cire ko canza kowane tambari, alamomi, almara ko sanarwa na mallakar mallaka, gami da amma ba'a iyakance ga kowane haƙƙin mallaka, alamar kasuwanci ba, tambari a cikin Software. Kila ba za ka iya bayyana sakamakon kowane aiki ko kimanta aikin kowane software ga kowane ɓangare na uku ba tare da rubutaccen izinin Linortek na kowane irin wannan sakin ba.
3. Sabuntawa.
   Linortek na iya haɓaka sabuntawa daga lokaci zuwa lokaci, haɓakawa, faci, gyaran kwaro da sauran gyare-gyare ("Sabuntawa") don haɓaka aikin software. Sai dai kamar yadda aka bayar akan Linortek website, wadannan Updates za a bayar da ku kyauta. Ana iya shigar da waɗannan ɗaukakawa ta atomatik ba tare da sanarwa a gare ku ba. Ta amfani da software, kuna kuma yarda da Sabuntawa ta atomatik. Idan ba ku yarda da wannan ba za ku iya shigar, samun dama, kwafi ko amfani da software ta kowace hanya.
4. Mallaka.
   Software yana da lasisi gare ku kuma ba a siyar dashi ba. Linortek yana tanadin duk haƙƙoƙin software da duk wani Sabuntawa da ba a bayar da su kai tsaye a ciki ba. Software da samfuran Linortek ana kiyaye su ta haƙƙin mallaka, alamar kasuwanci da sauran dokokin mallakar fasaha da yarjejeniya. Linortek da masu lasisinsa sun mallaki take, haƙƙin mallaka, alamun kasuwanci da sauran haƙƙoƙin mallakar fasaha a cikin software.
   Ba a ba ku kowane haƙƙi zuwa alamun kasuwanci ko alamun sabis na Linortek ba. Babu lasisin da aka bayyana a cikin wannan EULA.
5. Karewa
   Wannan EULA tana da tasiri daga ranar da kuka fara amfani da Software kuma za ta ci gaba har tsawon lokacin da kuka mallaki Samfurin Linortek mai alaƙa da shi ko har sai ku ko Linortek kun ƙare wannan yarjejeniya a ƙarƙashin wannan sashe. Kuna iya dakatar da wannan EULA a kowane lokaci bisa rubutaccen sanarwa ga Linortek a adireshin da aka bayar a ƙasa. Linortek na iya dakatar da wannan EULA a kowane lokaci idan kun kasa bin kowane ɗayan sharuɗɗan wannan yarjejeniya. Lasisin da aka bayar a cikin wannan EULA yana ƙarewa nan da nan lokacin da yarjejeniyar ta ƙare. Bayan ƙarewa, dole ne ka daina amfani da Samfurin Linortek da Software kuma dole ne ka share duk kwafin
   Software. Har yanzu sharuɗɗan Sashe na 2 za su ci gaba da aiki bayan yarjejeniyar ta ƙare.
6.  Garanti Disclaimer.
   DOKAR DOKAR DOKAR TA YARDA, LINORTEK YANA BAYAR DA SOFTWARE “AS-IS” KUMA YA KARE DUK GARANTI DA SHARUDI, KO BAYANI, BAYANI, KO DOKA, HADA GARANTIN ARZIKI, ARZIKI, BANGASKIYA, BANGASKIYA. JIN DADI, INGANTATTU, DA RASHIN CUTAR DA HAKKIN YAN UWA UKU. LINORTEK BA YA SHAFIN KOWANE SAKAMAKOTA TAUSAMMAN DAGA AMFANI DA SOFTWARE. LINORTEK BA YA YI WARRANTI CEWA SOFTWARE BA ZAI KASANCEWA BA, KYAUTA CUTUTTUKA KO WASU CUTAR CUTAR, AKAN LOKACI, AMINCI, KO KUSKURE. KANA AMFANI DA SOFTWARE DA SAFARKIN LINORTEK A HANYAR KANKU DA HADARI. ZAKU IYA DA ALHAKIN KAWAI GA (DA LINORTEK RASHIN YIN RA'AYI) KOWANE RASHI, ALHAZAI, KO LALATA SAKAMAKON AMFANI DA SOFTWARE.
   DA LINORTEK PRODUCT.
7. Iyakance Alhaki.
   Babu wani abu a cikin wannan EULA musamman a cikin wannan juzu'in "Iyakacin Alhaki" da zai yi ƙoƙarin keɓance abin alhaki wanda ba za a iya cire shi a ƙarƙashin doka mai dacewa ba.
   ZUWA MATSALAR MATSALAR DOKA, BAN DA GARANTI NA KE SAMA, BABU FARUWA BA ZA (A) LINORTEK ZAI IYA HANNU GA DUK WANI SABODA HAKA, MISALI, NA MUSAMMAN, KO ILLAR BAN GASKIYA, DAGA KO GAGARUMIN KAYAYYA KO SOFTWARE, KO DA LINORTEK YA SAN KO YA KAMATA YA SAN YIWUWAR IRIN WANNAN LALACEWAR, DA (B) JAMA'AR LINORTEK TA CUMULATIVE LIABILITY DA YA FITO DAGA KO KUMA KUMA KUMA KUMA KUMA KUMA KUMA KUMA KUMA KUMA KUMA KUMA KUMA KUMA KUMA KUMA KUMA KUMA KUMA KUMA KUMA KUMA KUMA KUMA KUMA KUMA KUMA KUMA KUMA KUMA KUMA KUMA KUMA LINORTEK ya SAN ya SAN, ZA'A IYA IYA IYA KYAU ZUWA KADA DOMIN TABA WUCE ADADIN DA GASKIYA DA KUKE BIYA ZUWA GA MAI RABON Izinin LINORTEK DA LINORTEK KO WAKILAN SIYAYYA DON KYAUTATA KO HIDIMAR DA AKE FITARWA A CIKIN WATA 6. WANNAN IYAKA TARE NE KUMA BA ZAI KARA KARAWA BA SABODA SAMUN FARUWA FIYE DA DAYA KO DA'AWA. LINORTEK YA YI RA'AYI DA DUK WATA ALHAKI NA KOWANE IRIN MASU SAMUN LASANCEWAR LINORTEK.
8. Yarda da Dokokin fitarwa.
   Kun yarda cewa software da fasaha masu alaƙa suna ƙarƙashin dokokin sarrafa fitarwar Amurka ikon fitarwar Amurka kuma maiyuwa yana ƙarƙashin ƙa'idodin fitarwa ko shigo da kaya a wasu ƙasashe. Kun yarda da ƙwaƙƙwaran bin duk ƙa'idodin ƙasa da ƙasa da ƙa'idodi waɗanda suka shafi software, gami da Dokokin Gudanar da fitarwar Amurka da kuma ƙarshen mai amfani, ƙarshen amfani, da ƙuntatawa na makoma da Amurka da wasu gwamnatoci suka bayar. Kun yarda cewa kuna da alhakin samun izini don fitarwa, sake fitarwa, ko shigo da software da fasaha masu alaƙa, kamar yadda ake buƙata.
   Za ku ramuwa da riƙe Linortek mara lahani daga kowane da'awar, asara, alhaki, diyya, tara, hukunce-hukunce, farashi da kashe kuɗi (gami da kuɗin lauya) wanda ya taso daga ko ya shafi duk wani keta da ku na wajibcin ku a ƙarƙashin wannan sashe.
9. Ayyuka.
   Ba za ku iya sanya kowane haƙƙoƙinku ko wajibai a ƙarƙashin wannan EULA ba, kuma duk wani ƙoƙari na sanyawa zai zama banza kuma ba tare da tasiri ba.
10. Sanarwa.
    Linortek na iya ba da duk wata sanarwa da ke da alaƙa da wannan EULA ta amfani da imel da adireshin da kuka bayar lokacin da kuka yi rajista da Linortek.
11. Hassada
    Don yin tasiri, duk wani da duk wani hakki na Linortek a nan dole ne ya kasance a rubuce kuma wakilin Linortek mai izini ya sanya hannu. Duk wani gazawar Linortek don aiwatar da kowane lokaci a nan ba za a yi la'akari da shi ba.
12.  Tsayuwa.
    Duk wani tanadi na wannan EULA da aka samu ba a iya aiwatar da shi ba za a gyara shi kuma za a fassara shi don cimma manufofin wannan tanadin zuwa iyakar da zai yiwu a ƙarƙashin dokar da ta dace kuma duk sauran tanade-tanaden za su kasance cikin cikakken ƙarfi da tasiri.
13. Dokar Mulki; Wuri.
    Kun yarda cewa wannan EULA, da duk wani iƙirari, jayayya, mataki, dalilin aiki, batu, ko neman taimako da ya taso daga cikin ko kuma ya shafi wannan EULA, za a yi amfani da dokokin jihar North Carolina, Amurka, ba tare da la'akari da rikice-rikice na ƙa'idodin dokoki ba, muddin kuna zaune a ƙasar da ba za ta yi amfani da dokar Amurka ga rigingimu masu alaƙa da waɗannan sharuɗɗan ba, to, dokokin ƙasarku za su yi aiki. Har ila yau, kun yarda cewa Yarjejeniyar Majalisar Dinkin Duniya kan Yarjejeniyar Siyar da Kaya ta Duniya ba za ta yi ba
    nema. Kun yarda cewa ba tare da la’akari da kowace ƙa’ida ko doka akasin haka ba, duk wani dalili na ɗaukar mataki akan mu wanda ya taso daga ko kuma yana da alaƙa da Linortek webshafin yanar gizon, Software ko samfuran Linortek dole ne su fara a cikin shekara ɗaya (1) bayan abin da ya haifar da haɓaka ko kuma irin wannan dalilin aikin za a hana shi dindindin. Duk wani mataki ko ci gaba da ya shafi wannan EULA dole ne a gabatar da shi a gaban kotun tarayya ko ta jiha da ke Raleigh, North Carolina kuma kowace ƙungiya ba tare da sokewa ba ga hukumci da wurin kowace irin wannan kotun a cikin irin wannan da'awar ko jayayya, sai dai Linortek na iya neman hukunci. taimako a kowace kotun da ke da ikon kare dukiyarta.
14. Shawarar California 65 Gargaɗi.
    GARGADI: Wannan samfurin na iya fallasa ku ga sinadarai da suka haɗa da gubar, wanda jihar California ta sani don haifar da ciwon daji. Don ƙarin bayani, je zuwa www.P65Warnings.ca.gov.

Farawa

SERVER na Fargo shine abin da ake kira samfurin "bare board" kuma ana ba da shi ba tare da gidaje ba. Yana aiki akan ƙananan voltage; duk da haka kuna buƙatar amfani da matakan kulawa masu sauƙi don hana lalacewa ga da'irori. Duk kayan lantarki suna da saukin kamuwa da fitarwar lantarki. Wannan babban voltage “shock” na iya lalata na’urarka har abada. Kafin sarrafa samfurin, ya kamata ka taɓa ƙasa kamar benci na ƙasa ko tebur. Hakanan yana da kyau a sarrafa na'urar daga gefuna. Idan kun lura cewa kujera ko tufafin ku sukan haifar da fitarwa, dole ne ku yi taka tsantsan. Ana ba da naúrar da ƙafar roba huɗu waɗanda ke hana ƙasan allo shiga cikin saman da kuka sanya shi. Yi hankali kada ka bar abubuwa na ƙarfe, irin su screw drivers ko hardware, su haɗu da kasan wannan samfurin. Za a iya saka allon a kan panel ta amfani da tsayawa da kayan aiki na #4. Ana haɗa ramukan hawa zuwa siginar GROUND. Sashen SERVER mai sarrafa kansa web uwar garken da aka saita tare da nau'ikan shigarwa da fitarwa iri-iri. Kodayake an ƙididdige relays don mafi girma voltage, wannan samfurin ba a ƙera shi don amfani ba a layin voltage. Kada ku taɓa amfani da voltages ta samfurin SERVER wanda ya wuce 48 volts. BA LAFIYA BANE.
SERVER KODA yanki ne da aka keɓe tare da shingen dogo mai hawa DIN wanda za a iya ɗaure shi a kan dogo na DIN ko kuma a haɗa shi da kowane fili mai faɗi kamar bango ko ƙarƙashin tebur. KODA 100 yana da relays guda biyu (48VAC@1A), KODA 200 yana da relays guda huɗu waɗanda zasu iya fitar da 10V 50mA zuwa na'urori na waje. Ana ba da naúrar tare da shinge mai hawa DIN Rail tare da masu haɗa tasha mai cirewa don shigarwa cikin sauƙi. Ana iya dora SERV ɗin KODA akan panel ko a bango ta amfani da shirin DIN dogo mount. Masu haɗin tashar tashar waya mai cirewa suna sauƙaƙe shigarwar filin kuma suna ba da izinin matsala mai sauƙi da kulawa: za'a iya cire naúrar daga tsarin ba tare da damun tsarin wayoyi ba.

Wayar da Sabar
Lura: Don zane mai nuna wurin duk masu haɗin kai akan SERVER ɗin da aka ambata a cikin wannan sashe, da fatan za a duba sashin - Maganar Layout Board.
Tsanaki: Waɗannan raka'a sun keɓe. Koyaushe haɗi don madaukin wutar lantarki ya haɗa kawai zuwa naúrar SERVER.
KAR a yi amfani da haɗin ƙasa na waje. Yin hakan na iya lalata SERVER ko asalin na'urar POE.

1. Sanya naúrar akan tebur ko benci a kiyaye kar a bar wani abu na ƙarfe ya taɓa ƙasan allon kewayawa (Fargo Only).
2. Haɗa wutar lantarki ta 12VDC zuwa madaidaicin AC kuma toshe mai haɗin ganga cikin SERVER a wurin da aka lakafta "12VDC/POWER". A madadin, zaku iya amfani da POE. A wannan lokacin GREEN/Boot LED ya kamata ya kunna ya fara walƙiya yana nuna SERVER yana aiki kuma yana cikin "Yanayin Bootload". Wannan yanayin yana ba mai amfani damar sabunta software na uwar garken da ake amfani da shi akan naúrar. Bayan kamar daƙiƙa 5, GREEN LED zai kashe kuma RED LED zai fara kiftawa sau ɗaya a cikin daƙiƙa ɗaya yana nuna SERVER yana aiki a cikin "Server Mode" kuma ana samun dama ga hanyar sadarwa ta hanyar amfani da ka'idojin TCP/IP.
   HANKALI: LOKACIN DA KAYI AMFANI DA POE NETWORK SWITCH, KAR KA YI AMFANI DA WUTA 12VDC DOMIN WUTA SERVER A LOKACI DAYA, ZAI CUTAR DA BOARD.
3. Toshe kebul na Ethernet cikin mahaɗin RJ45/NET. LED "Haɗin kai" zai zo idan akwai hanyar sadarwa na 100MHz, in ba haka ba zai kasance a kashe kuma "Ayyukan" LED ya kamata ya fara kyalkyali yana nuna ayyukan cibiyar sadarwa. Fargo G2 Relay Connections
   Akwai relays guda 8 akan FARGO R8 da 4 akan FARGO R4. Waɗannan busassun relay ne. An tsara waɗannan raka'a don ƙananan voltage iko kuma bai kamata ya sami voltage amfani da relay fiye da 48 volts. Wannan don amincin ku ne da kuma kasancewa cikin ma'auni na sassa da ƙirar allon kewayawa. Relays ɗin yana da tashoshi 3 masu lakabin NO, C da NC waɗanda ke tsaye ga Buɗaɗɗen Al'ada, Na gama-gari da na Kullum. Lokacin da aka kunna, gudun ba da sanda yana motsa haɗin kai daga CNC zuwa CNO. Idan kana son yin haɗi lokacin da aka kunna relay, haɗa wayoyi tsakanin C da NO. Lokacin da aka kunna relay C da NO za a haɗa su tare. Idan kana son karya da'ira lokacin da aka kunna relay, yi haɗin kai zuwa C da NC. Lokacin da aka kunna relay ɗin za a karye (ko buɗe)
   Koda Relay Connection
   Akwai 2 relays akan KODA 100. KODA 100 yana da masu haɗin matsayi 2 masu cirewa (1 ga kowane gudun ba da sanda) kuma ana ƙidaya su kawai "1" da "2". Waɗannan relays yawanci a buɗe suke.
   Akwai 4 relays akan KODA 200. KODA 200 yana da mai haɗin matsayi 8 mai cirewa 1. Kowane gudun ba da sanda yana da haɗin “+” da haɗi mai lamba. Za'a iya saita relays don samar da kusan 10VDC ta zaɓi "+V" akan maɓallin saiti (duba Bayanin Layout na Board shafi na 29) ko saita don bushe lamba DC akan sauyawa. Idan an zaɓi "+V" to voltage zai kasance a kan tashar "+" kuma tashar mai lamba ita ce dawowa. In ba haka ba, buɗaɗɗen lamba ta al'ada tana wanzuwa a cikin haɗin "+" da lamba. KODA 100/200 an tsara shi don ƙananan voltage iko kuma bai kamata ya sami voltage amfani da relay fiye da 48 volts. Wannan don amincin ku ne da kuma kasancewa cikin ma'auni na sassa da ƙirar allon kewayawa.

BABU ABUBUWAN DA FASSARAR LINOR ZA TA IYA DOKA, KO A HANGADI, AZABA, KO WANI HAKA, GA DUK WANI LALACEWA, NA MUSAMMAN, GASKIYA, SABODA HAKA KO HUKUNCI, HADA, AMMA BAI IYA IYA IYA SAMUN LAFIYA BA, , RASHIN CINIKI, KO RASHIN RIBA, ARZIKI, KO SAMUN SAMUN SAMUN CIKAKKEN IRIN WANNAN DOKA.

KARIN SANARWA DON IYAKAR AMFANI
Sai dai in an fayyace ta musamman, wannan samfurin ba a ƙera shi don sauya layin voltage kayan aiki. Wannan iyakance ya haɗa da duk samfuran FARGO DA KODA. Don sarrafa na'urar da ke aiki a layi voltagDOLE mai amfani dole ne ya shigar da na'urar tsaka-tsaki kamar gudun ba da sanda.
Lokacin kunna layi voltage na'urar da ke amfani da na'urar tsaka-tsaki, DOLE ko dai ku kasance ƙwararren ƙwararren wutar lantarki ko amfani da sabis na ƙwararren ma'aikacin lantarki. Bugu da ƙari, dole ne a bi lambobin gida ciki har da, amma ba'a iyakance su ba, girman ma'aunin waya da gidaje masu dacewa.
Linortek ba zai iya ɗaukar kowane alhakin cutarwa ga mai amfani ko ɓangare na uku don yin amfani da samfuran Fargo/Koda ba daidai ba. Wannan alhaki ya kasance tare da mai amfani. Linortek ba zai iya ɗaukar kowane alhakin lalacewa ga na'urar don yin amfani da samfurin SERVER ɗin mu ba daidai ba.
Don ƙayyadaddun bayanai na relay, da fatan za a duba Layout Reference shafi na 29
Haɗin Input na Dijital (Fargo R4 da Koda)
Abubuwan shigar da dijital suna ba SERVER damar gano yanayin kunnawa/kashe waje na firikwensin. Da wannan bayanin SERVER zai iya nuna ko shigarwar tana kunne ko a kashe, ƙidaya abubuwan da suka faru a cikin ma'aunin sake saiti ko wanda ba za a iya sake saiti ba, da ƙididdige mitar (kamar don amfani azaman tachometer) ko lokacin shigarwar. Akwai hanyoyi guda biyu na aiki don abubuwan shigar da dijital - PULL UP da keɓewa.
a) Yanayin PULL UP yana haɗa resistor 1K zuwa vol na cikitage ba ka damar amfani da sauƙi mai sauƙi (kamar maɓalli na kofa) a kan tashoshi 1 da 2. Wannan lokacin da aka kunna sigina ana aika sigina zuwa shigarwar.
b) Yanayin keɓe yana ba ka damar fitar da optoisolator na SERVER kai tsaye tare da volt na wajetage ko da yake na ciki 1K resistor. Wannan voltage na iya kasancewa cikin kewayon 5V zuwa 24V yana ba da mafi ƙarancin 2mA ko matsakaicin 30mA zuwa diode optoisolator. Babu wani haɗin ciki na ciki zuwa wannan voltage don haka shi ne keɓaɓɓen shigarwa. Lura, lokacin haɗa da'irar 12VDC-¬24VDC zuwa shigarwar, dole ne a yi amfani da resistor na waje (ana iya bayar da ita a buƙatun, 2.2k ohm 0.5watt).
Ana zaɓar waɗannan hanyoyin ta hanyar sauyawa akan SERVER (duba Bayanin Layout Board shafi na 29) mai alamar ISO da PU don keɓanta da ja sama bi da bi. An saita waɗannan a masana'anta zuwa ISO ta tsohuwa.
Wayar da maɓallin turawa: Don nisa har zuwa ƙafa 500, waya mai garkuwar AWG 20 ta dace don haɗa maɓallin turawa. Idan nisa tsakanin maɓallin turawa da mai sarrafawa ya kai ƙafa 5,000, yi amfani da kebul mai kariya 16 AWG maimakon. Ka tuna cewa dogayen tafiyar kebul ɗin sun fi sauƙi ga kutsewar sigina.
Tsanaki: Idan kuna son yin amfani da keɓantaccen yanayi, tabbatar da cewa an saita maɓallin shigarwa zuwa ISO kafin amfani da vol na waje.tage. Yin in ba haka ba na iya lalata SERVER ko asalin na'urar POE.
Haɗin Input Analog (Fargo R4ADI)
Abubuwan shigar da analog ɗin suna ba SERVER damar karanta ƙimar kayan aiki na waje. Ana shigar da analog guda 2.
Don saka idanu na AC na yanzu, yi amfani da ɗayan abubuwan sitiriyo 3.5mm guda biyu don yin mu'amala tare da firikwensin halin yanzu.
Tubalan shigarwar analog guda 2 ana haɗa su da na'urori masu auna firikwensin 0-5V na yanzu waɗanda ƙila za a haɗa su da na'urori iri-iri kamar zafin jiki ko na'urori masu auna matsa lamba. SERVER yana ba da haɗin ƙasa da wuta don a iya yin ma'auni ba tare da vol na waje batage references. Ya kamata ku yi amfani da firikwensin da ke keɓe don kada ya haɗa da ƙasa mai nisa. Dubi zane a ƙarƙashin Tsarin Magana na allo shafi na 29.
Shiga SERVER ɗin ku
Da zarar an kunna SERVER ɗin ku kuma an haɗa shi da hanyar sadarwar, za ta sami adireshin IP ta atomatik ta DHCP muddin an saita na'ura mai ba da hanya tsakanin hanyoyin sadarwa don yin haka. Don haɗawa, shigar da adireshin IP a cikin ku web mai bincike. Wannan zai kai ku zuwa shafin saukar SERVER ɗin ku. Don shiga, danna maɓallin Shiga a saman dama na shafin. Burauzar ku zai sa ku shigar da sunan mai amfani da kalmar wucewa. Ta hanyar tsoho, waɗannan takaddun shaida duka an saita su zuwa admin. Don nemo adireshin IP na SERVER, duba ƙasa.
Nemo Adireshin IP ɗin ku tare da Linortek Discoverer
Shirin Discoverer zai gano SERVER ɗin ku ta atomatik. Mai ganowa shirin Java ne, kuma yana buƙatar shigar da lokacin aikin Java don amfani da wannan fasalin. Ana iya samun Java a nan: http://java.com/en/download/index.jsp.
Don sauke shirin Discover, da fatan za a je zuwa: https://www.linortek.com/downloads/supportprogramming/
An ba da shawarar yin amfani da masu binciken Chrome & Firefox. Lura: Idan kun fi son amfani da Internet Explorer, Internet Explorer yana adana Linortek Discoverer azaman Zip file ta tsohuwa. Domin amfani da Mai ganowa, kuna buƙatar zaɓar Ajiye azaman kuma sake suna file kamar yadda Linortek Discoverer.jar lokacin da kake saukewa.
Lokacin zazzage shirin Discover, wani lokacin za ku ga saƙon faɗakarwa wanda ya danganta da saitunan tsaro na burauzan ku, yana tambayar ko kuna son kiyayewa ko jefar da wannan. file, da fatan za a danna maɓallin Keep saboda wannan shirin Java ne, kuma ba zai cutar da kwamfutarka ba.
Da zarar Discoverer ya gano na'urarka, zai nuna:

1. Adireshin IP
2. Sunan Mai watsa shiri
3.  MAC Address
4. Sauran Bayani:
   a. Blue LED (idan kun kunna)
   b. Sunan samfur
   c. Sabis na Software na Sabar
   d. Lambar tashar jiragen ruwa (Idan an aika)

Danna na'urar da kake son amfani da ita wanda aka nuna akan shirin Discoverer don kaddamar da SERVER web shafuka a cikin burauzar ku. Danna maɓallin Login akan shafin gida. Tsohuwar sunan mai amfani/password shine: admin/admin. Kuna iya canza waɗannan kamar yadda kuke so ko kashe wannan fasalin a cikin menu na saiti.
Haɗa SERVER ɗin ku kai tsaye zuwa PC ɗin ku
Hakanan zaka iya toshe SERVER ɗinka kai tsaye zuwa PC ɗinka idan babu haɗin yanar gizo da ke akwai. Idan ka toshe SERVER ɗinka cikin tashar Ethernet na PC ɗinka zai yi amfani da adireshin IP na asali: 169.254.1.1 sai dai idan a baya ka saita SERVER ɗinka don amfani da tsayayyen IP. Shigar da 169.254.1.1 a cikin ku web browser don haɗawa. Babu haɗin intanet da ake buƙata. Da zarar an saita, zaku iya shigar da SERVER ɗin ku a inda kuke so.

Kanfigareshan Sabar
Shiga
Da zarar ka shigar da adireshin IP da lambar tashar jiragen ruwa, idan an saita, shafin shiga zai buɗe. Wannan shafin yana nuna sunan wannan uwar garken wanda zaku iya canzawa a Configure/Config Network.

Wannan shafin yana tsaye ba tare da wani aiki na baya ba kuma wuri ne mai fa'ida don yin kiliya idan ba kwa amfani da SERVER kuma ba kwa son rufe haɗin gwiwa.
Ta danna LOGIN, za a tambaye ka sunan mai amfani da kalmar wucewa. Masu binciken za su ci gaba da riƙe waɗannan takaddun shaida har sai an rufe mai binciken. Kuna iya musaki buƙatun kalmar sirri a shafin Saituna. Duba sashe na 21.
Shafin Gida
Da zarar an shigar da takaddun shaidar shiga, za a tura ku zuwa babban shafin aikace-aikacen. Shafin Gida ko Fihirisar yana nuna wasu bayanan tsarin kuma yana ba da damar gano na'urar ta zahiri idan tana cikin yanki tare da wasu. Dubi lissafin da ke ƙasa don bayanin.

• LOKACI - An nuna tare da ranar mako. Ana iya saita wannan lokacin ya kasance cikin tsari na sa'o'i 12 tare da alamar AM/PM ko tsarin sa'o'i 24.
• DATE - Ana nuna kwanan wata a nan.
• VOLTS - Voltage a allon yana nunawa. Wannan na iya zama da amfani idan an kunna SERVER tare da wasu kayan aiki, voltage variance za a iya lura. Sabar Fargo da Koda suna da juzu'in shigarwatage kewayon 1248vDC.
• ZAFIN - Ana nuna yanayin zafi a kan allo. Wannan nuni yana iya zama ko dai °C ko °F. Zafin da SERVER ke haifarwa zai shafi wannan zafin don haka koyaushe zai kasance yana ɗan girma fiye da yanayin yanayi.
• LEDs - Akwai 3 LEDs nuni. RED LED shine tsarin bugun jini. Wannan yakamata yayi kiftawa kusan sau ɗaya a cikin daƙiƙa guda muddin uwar garken yana gudana. Ana amfani da GREEN LED don zaɓuɓɓukan bootloader kuma gabaɗaya ba a gani akan website. BLUE LED ana iya dannawa kuma zaka iya kunna shi da kashe shi daga wannan web shafi. Wannan yana da amfani wajen gano na'urar a zahiri idan an yi amfani da ita tare da sauran raka'o'in makamantan su kamar yadda zai haskaka kan na'urar da wannan. web browser an haɗa. Shirin Discoverer kuma zai lura idan BLUE LED yana kunne. Ana kiran wannan sau da yawa azaman aikin “Gano wuri”.

Ayyuka
Shafin Sabis yana da ƙarfi kuma zai canza dangane da tsarin sabar ku. Wannan shine inda zaku iya sarrafa abubuwan shigarwa, abubuwan fitarwa, na'urori masu auna firikwensin da sauran abubuwan sarrafawa na musamman.
Shiga/Fita ko Shafin Relays
Ya danganta da wane SERVER da kuke amfani da shi, shafin farko akan shafin SERVICES zai kasance ko dai In/fita ko Relays.
In/Out yana da ikon relay da abubuwan shigar da bayanai akan shafi ɗaya, yayin da Relays kawai ke da ikon relay.
Gudanar da Relay
Ana nuna shafi na Shiga/Fita a ƙasa. Wasu shafukan sarrafawa na relay suna da nunin relays 2, 4 ko 8. Kowane relay yana da lamba, a wannan yanayin 1 zuwa 4.

LED LED na Jiha yana nuna ko an kunna ko kashewa ta GREEN da RED bi da bi. Ana iya danna wannan gunkin don sarrafa abin da ya dace da hannu. Kowane relay na iya samun Suna da kuma masu gano hanyoyin Buɗaɗɗen al'ada, gama-gari da na Kullum.
Akwai LEDs matsayi guda huɗu waɗanda ke nuna:

1. Imel - Idan za a aika imel lokacin da aka kunna/kashe wannan relay
2. Pulse - Idan an saita wannan Relay tare da faɗin bugun jini da nisa bugun bugun jini (tsawon lokaci) - duba sashe na gaba don ƙarin bayani
3.  An tsara – Idan akwai jadawali da aka ƙirƙira a shafin Ayyuka (duba shafi na 15) saita don kunna wannan relay ta atomatik.
4.  Timed - Idan an saita bugun bugun jini kuma an kunna wannan relay, LED ɗin Timed zai juya ja yana nuna cewa relay ɗin yana aiki a halin yanzu akan mai ƙidayar lokaci.

Danna Alamar Gyara don gyara abubuwan sarrafawa don abin da ya dace. Wannan zai kai ku zuwa shafin Saitin Relay (duba shafi na 11).
Abubuwan shigarwa
Shafin In/Fitarwa ko Shigarwa (ya danganta da SERVER ɗin ku) zai nuna bayanai daga kowace shigarwa. SERVERs suna da haɗin abubuwan shigarwa. Fargo R4DI yana da bayanai na dijital guda huɗu, R4ADI yana da, abubuwan dijital guda huɗu, abubuwan analog guda huɗu. SERVER KODA yana da abubuwan shigar dijital guda biyu.
A saman kowane shigarwa akwai lakabi (misali: DIN 1, AIN 2) wanda ke ƙayyade ko shigarwar dijital ce (DIN) ko shigarwar analog (AIN) da kuma lambar shigarwa. Wannan lakabin zai juya kore lokacin da aka kunna shigarwar. A cikin akwatin za a sami duk wani nuni da aka saita daga Shafin Saita Shigarwa (duba shafi na 12 don shigarwar dijital, shafi na 14 don shigarwar analog). Dot ja a cikin ƙananan kusurwar hagu mai nuna yanayin haɗin kai (idan akwai), za ta juya kore lokacin da aka kunna haɗin kai.
A ƙarshe, alamar Gyara a cikin ƙananan-kusurwar dama na akwatin don gyara shigarwar da ta dace. Wannan zai kai ku zuwa Saitin Input na Dijital ko Saita Shafin Input na Analog (shafi na 12 ko shafi na 14).
Saita Shafin Relay
Shafin SET RELAY yana ba ku damar saita kaddarorin daban-daban dangane da Relay.

1. Zaɓin Relay - Relay ɗin da kuke gyarawa (wanda aka gano ta layin da kuka danna alamar Gyara akan shafin RELAY).
2. Suna – Shigar da Sunan Relay Characters 15. Ana iya amfani da wannan da filayen guda 3 masu zuwa don kowane bayanin da ake so.
3. BABU Suna – Shigar da suna mai haruffa 7 don haɗin Buɗaɗɗen Al'ada (NO).
4. Com Name – Shigar da sunan haruffa 7 don haɗin gama gari (COM).
5. Sunan NC – Shigar da sunan haruffa 7 don haɗin da aka rufe (NC).
6. Faɗin bugun bugun jini – Lokacin da kake sarrafa relay yana kunna ko kashewa. Kuna iya sarrafa shi na ɗan lokaci da aka kunna ta hanyar shigar da Nisa Pulse lokacin da 0 ke nufin babu abin da ya faru kuma lamba tana wakiltar tsawon lokacin bugun jini. Matsakaicin adadin da zaku iya shigar anan shine lambobi 4, watau. 1234.
7. Pulse Width Multiplier - Don ƙarin ayyana tsayin bugun bugun jini zaɓi nau'in Faɗin bugun bugun jini don ƙara ayyana faɗin bugun jini. Kuna iya zaɓar:
   • Babu
   • mS (Millisecond, 1/1000 seconds)
   • Dakika (dakika)
   Minti (minti)
8. Nau'in Relay - SERVER na iya samun damar isar da saƙo ta jiki akan SERVER ko ta amfani da wasu hanyoyi. Kuna iya zaɓar:
   • Na al'ada – misalta jiki akan SERVER
   Latched - ba a tallafawa a halin yanzu
   Nisa – gudun ba da sanda akan wani SERVER da aka samu akan hanyar sadarwar
   • Zigbee – gudun ba da sanda a na'ura mai nisa da aka samu akan tsarin RF
   • Na al'ada da Nisa - duka relays suna kunne
   • Na al'ada da Zigbee - duka relays suna kunna
9. ID na wurin – wannan lamba ce da ke gano wuri mai nisa
10. Relay a Wuri – lamba mai wakiltar gudun ba da sanda ko na'urar a wurin
11. Aika Imel - ana iya tsara SERVER don aika saƙon Imel idan an kunna ko kashe relay.

Saita Shafin Shigar Dijital
Ana iya saita abubuwan shigar da Dijital don samar da abubuwan karantawa iri-iri akan amfani da kewayon nau'ikan nuni. Baya ga nuna bayanan shigarwa, zaku iya suna nunin tare da haɗa relay da shi. Wannan relay zai canza daga Green zuwa RED yayin da yake tafiya daga gaba zuwa kashe kuma ana iya dannawa don sarrafa shi. Ta danna gunkin fensir mai gyara, zaku iya shirya saitunan wannan shigarwar:

1. Zaɓan Input na Dijital - Abubuwan shigar da dijital da kuke gyarawa (wanda aka gano ta layin da kuka danna gunkin Gyara).
2. Suna - Kuna iya saita suna mai haruffa 15 don wannan shigarwar. Wannan sunan yana shiga cikin mashaya a saman nunin.
3. Lakabin – Saita lakabin haruffa 7 wanda aka nuna akan ainihin nuni mai aiki.
4. Mai gyara - Yin amfani da wannan filin zaka iya ƙara, ragi, ninka, ko raba ƙima kafin a nuna ƙimar akan shafin nuni. Wannan madaidaicin ƙima 2 ne tare da kowanne an raba shi da hali guda ɗaya. (watau “+2, -2, *3, /3”)
5. AMFANI - Yana saita wannan shigarwar zuwa aiki. Yana juya alamar shigar da lambar zuwa kore. Ya kamata a lura cewa lokacin amfani da shigarwar yana cinye lokacin CPU da sauran albarkatu dangane da nau'in sa. Kodayake duk abubuwan da aka shigar zasu iya aiki a lokaci guda, ana ba da shawarar kunna waɗanda kuke son amfani da su kawai.
6.  Nau'in - Ana iya amfani da bayanan shigarwa don ƙididdige adadin sakamako. Kuna iya zaɓar:
   Jiha – Wannan yana da amfani don sanin idan shigarwar tana kunne ko a kashe, kamar kunna ko kashe kofa.
   • CounterNR - Wannan ma'aunin da ba a sake saitawa ba ne.
   CounterR - Wannan ma'aunin sake saitawa ne.
   Mita - Yana ƙidaya mitar shigarwa a cikin KHz (kilo hertz ko 1/1000 seconds). Wannan na iya zama da amfani wajen nuna tachometer inda 60Hz = 1 RPM
   Lokaci – a cikin daƙiƙa 1/1000 shigarwa a cikin kHz (milli seconds ko 1/1000 seconds). Wannan zai zama da amfani don auna al'amuran lokaci.
7.  Nuni - Wannan zaɓin yana ba ku damar canza nau'in nunin da aka yi amfani da shi. Kuna iya zaɓar:
   Digige – Digi guda ɗaya mai ƙima a tsakiya. Ana iya amfani da wannan don Jiha. Kuna iya yin alamar bebe ta canza launin Dot bisa ƙimar. Alamar tana ƙarƙashin Dot.
   Ƙimar - Yana Nuna Madaidaicin Ƙimar tare da Alamar a cikin akwati kai tsaye a ƙasansa.
   Mita - Wannan Mita yana da ma'auni mai daidaitawa dangane da ƙimar Min/Max kuma ana iya yin launin baka ta kowane jeri mai launi. Ana nuna alamar a cikin Mita.
   • VBar - Hakanan ya dogara da ƙimar Min/Max don ma'auni kuma mashaya tana canza launi dangane da ƙima a cikin kewayon Launi.
8. Relay L/T – Shigar da lambar Relay anan. Idan relay na gida ne zai nuna GREEN ko JAN dangane da idan yana kunne ko a kashe. Ta danna shi Relay zai kunna da kashewa. Sunan ya fito daga shafin saitunan relay. Wannan na iya zama da amfani idan kuna son kunna da kashe batun nuni. Ana iya amfani da duk wani relay akan kowace shigarwa kuma kowace ana iya sake amfani da ita don kowace shigarwar. Ƙara L bayan lambar relay (misali: 2L) zai danganta yanayin shigarwar zuwa yanayin relay. Wannan hanya ce mai sauƙi kuma nan da nan don samun shigarwa ta bi hanyar gudu. Ƙara T bayan lambar relay zai haifar da relay zuwa yanayin shigarwar. Wannan hanya ce mai sauƙi kuma nan da nan don samun relay bi abin shigar.
9.  Umurnin Z/N/I - Ana amfani da wannan filin don ba da umarni daban-daban zuwa mai sarrafa Input na Dijital: Z Zero mai sake saitawa. N Bar shigarwar azaman Na al'ada. Na Juya abin shigar.
10. Ƙimar - Waɗannan su ne ƙimar Min/Max da ake amfani da su don nuni. Wannan yana da amfani don hana Mita wucewa ƙarshensa ko saita ƙimar VBar. Wannan shine Daraja bayan Mai gyarawa. Tsarin ba zai iya nuna ƙimar da ta wuce Max ba, don haka a tabbata an saita aƙalla zuwa 1.
11. Yellow/Ja/Green – Akwai launuka uku waɗanda za a iya amfani da su don ƙara ayyana nuni. Saita kewayon waɗannan launuka don ayyana launi zuwa ƙimar nuni. Wannan shine Daraja bayan Mai gyarawa. Ka lura cewa idan kana amfani da nau'in Jiha za ka iya sanya RED = Daga 0 zuwa 0, GREEN = Daga 1 zuwa 1 da YELLOW = Daga 2 zuwa 2. Tunda Jiha kullum ko 1 ko 0 ne wannan zai hana cikakkun bayanai kuma hana amfani da launi YELLOW. Kuna iya zaɓar kowane launuka biyu da kuke so don nau'in Jiha.

Saita Shafin shigar da Analog
Ana iya saita shigarwar Analog ɗin don samar da abubuwan karantawa iri-iri akan amfani da kewayon nau'ikan nuni. Baya ga nuna bayanan shigarwa, zaku iya suna nunin tare da haɗa relay da shi. Wannan relay zai canza daga Green zuwa RED yayin da yake tafiya daga gaba zuwa kashe kuma ana iya dannawa don sarrafa shi.

1. Ana Zaɓa Input Analog - Analog Input ɗin da kuke gyarawa (wanda aka gano ta layin da kuka danna gunkin Gyara).
2.  Suna - Kuna iya saita suna mai haruffa 15 don wannan shigarwar. Wannan sunan yana shiga cikin mashaya a saman nunin.
3. Lakabin – Saita lakabin haruffa 7 wanda aka nuna akan ainihin nuni mai aiki.
4. Mai gyara - Yin amfani da wannan filin zaka iya ƙara, ragi, ninka, ko raba ƙima kafin a nuna ƙimar akan shafin nuni. Wannan madaidaicin ƙima 2 ne tare da kowanne an raba shi da hali guda ɗaya. (watau “+2, -2, *3, /3”)
5. AMFANI - Yana saita wannan shigarwar zuwa aiki. Yana juya alamar shigar da lambar zuwa GREEN. Ya kamata a lura cewa lokacin amfani da shigarwar yana cinye lokacin CPU da sauran albarkatu dangane da nau'in sa. Kodayake duk abubuwan da aka shigar zasu iya aiki a lokaci guda, ana ba da shawarar kunna waɗanda kuke son amfani da su kawai.
6. Nau'in - Ana iya amfani da bayanan shigarwa don ƙididdige adadin sakamako. Kuna iya zaɓar:
   • Analog 1 - Analog 1 shigarwa daga SERVER tare da shigarwa kamar yadda aka samo akan R4ADI.
   • Analog 2 - Analog 2 shigarwa daga SERVER tare da shigarwa kamar yadda aka samo akan R4ADI.
   • AC Current 1 - AC halin yanzu firikwensin 1 shigarwa daga SERVER tare da shigarwa kamar yadda aka samo akan R4ADI.
   • AC Current 2 - AC halin yanzu firikwensin 2 shigarwa daga SERVER tare da shigarwa kamar yadda aka samo akan R4ADI.
   • AC Yanzu 3 - Ba a amfani da shi
   Volts – Ma'aunin juzu'itage kunna SERVER.
   • A halin yanzu - A kan samfuran "S", wannan shine na yanzu da SERVER ke cinyewa.
   • Int. Zazzabi - Zazzabi daga allon firikwensin da aka ɗora.
   • Ext. Temp - Zazzabi daga samfurin "S" SERVER.
   • R. Humidity - % Dangantakar Humidity daga SERVER samfurin "S".
   • MMA X - Bayanan accelerometer na X axis daga SERVER samfurin "S".
   • MMA Y - Bayanan accelerometer na axis Y daga SERVER samfurin "S".
   • MMA Z - Bayanan accelerometer na axis Z daga SERVER samfurin "S".
7. Nuni - Wannan zaɓin yana ba ku damar canza nau'in nunin da aka yi amfani da shi. Kuna iya zaɓar:
   1. Dot - Digi guda ɗaya tare da ƙimar a tsakiya. Ana iya amfani da wannan don Jiha. Kuna iya yin alamar bebe ta canza launin Dot bisa ƙimar. Alamar tana ƙarƙashin Dot.
   2. Ƙimar - Nuna Ƙimar Daidaitawa tare da Label a cikin akwati kai tsaye a ƙasa.
   3. Mita - Wannan Mita yana da ma'auni mai daidaitawa dangane da ƙimar Min/Max kuma ana iya yin launin baka ta kowane nau'in launi. Ana nuna alamar a cikin Mita.
   4. VBar - Hakanan ya dogara da ƙimar Min / Max don ma'auni kuma mashaya yana canza launi dangane da dabi'u a cikin jeri na Launi.
8. Relay – Shigar da lambar Relay anan. Idan relay na gida ne zai nuna Green ko RED dangane da idan yana kunne ko a kashe.
   Ta danna shi Relay zai kunna da kashewa. Sunan ya fito daga shafin saitunan relay. Wannan na iya zama da amfani idan kuna son kunna da kashe batun nuni. Ana iya amfani da duk wani relay akan kowace shigarwa kuma kowace ana iya sake amfani da ita don kowace shigarwar.
9. Ƙimar - Waɗannan su ne ƙimar Min/Max da ake amfani da su don nuni. Wannan yana da amfani don hana Mita wucewa ƙarshensa ko saita ƙimar VBar. Wannan shine Daraja bayan Mai gyarawa. Tsarin ba zai iya nuna ƙimar da ta wuce Max ba don haka a tabbata an saita aƙalla zuwa 1.
10.  Yellow/Ja/Green – Akwai launuka uku waɗanda za a iya amfani da su don ƙara ayyana nuni. Saita kewayon waɗannan launuka don ayyana launi zuwa ƙimar nuni. Wannan shine Daraja bayan Mai gyarawa. Ka lura cewa idan kana amfani da nau'in Jiha za ka iya sanya RED = Daga 0 zuwa 0, GREEN = Daga 1 zuwa 1 da YELLOW = Daga 2 zuwa 2. Tunda Jiha kullum ko 1 ko 0 ne wannan zai hana cikakkun bayanai kuma hana amfani da launi YELLOW. Kuna iya zaɓar kowane launuka biyu da kuke so don nau'in Jiha.

Shafin Ayyuka
Shafin TASKS yana nuna abubuwan da suka faru ta atomatik waɗanda za a iya tsara su cikin SERVER. Kuna iya tsara abubuwa har zuwa 16 a cikin SERVER. Wadannan an gina su kamar IDAN ... SAI maganganu. Bugu da kari, kalmar IF na iya samun abubuwa guda 2 (IF a, AND/OR/NOT b… TO c). Wannan yana ba da sauƙi don tsarawa da kuma hanya mai ƙarfi don ɗaukar advantage na bayanan da SERVER ya samu. Shafin Ayyuka yana nuna maka ƙarewaview na ayyukan da aka tsara. Kuna iya danna digon da ke cikin ginshiƙin Jiha don kunna ko kashe ɗawainiya da aka nuna ta koren digo don ON, da kuma ɗigon ja don KASHE. Don gyara ko ƙirƙirar ɗawainiya, danna gunkin Gyara a dama na layin ɗawainiya. Wannan zai kai ku zuwa shafin Saita Jadawalin dalla-dalla a sashe na gaba.

Saita Shafin Jadawalin
Shafin SET SCHEDULE yana ba ku damar ƙirƙirar lokaci da abubuwan tushen dabaru waɗanda zasu faru ta atomatik idan sharuɗɗan sun cika.

1. Jadawalin Zaɓi - An ƙaddara ta danna kan layin jadawalin daga shafin da ya gabata.
2.  Sunan Jadawalin – Shigar da Sunan Jadawalin haruffa 15.
3. AMFANI - Domin layin Jadawalin ya kasance mai aiki dole ne ka zaɓi maɓallin AMFANI. Idan akwai kuskure da aka gano wajen shigar da bayanan Jadawalin, akwatin USE zai cire ta atomatik.
4. LOG - Zaɓi log don wannan abu ya bayyana a cikin tsarin tsarin duk lokacin da aka kashe shi.
5. Imel - Danna Email don aika imel ta atomatik lokacin da aka aiwatar da wannan jadawalin.
6. Na'ura A - Zaɓi Na'ura A don kalmar farko a cikin bayanin IF daga akwatin digo.
7.  Data A - Zaɓi Data A don na'urar da ke sama. Dangane da na'urar da aka zaɓa, Bayanan da aka yi amfani da su don gwaji na iya samun kaddarori na musamman. Duba lissafin da ke ƙasa don Bayanan da za a iya shigar da su. Idan an gano kuskuren shigar indata lokacin da aka danna maɓallin “Ajiye”, akwatin USE zai buɗe kuma za a haskaka akwatin bayanan da ke ɗauke da kuskuren.
   Minti – Shigar: mm
   Sa'a - Shiga: hh (amfani da tsarin sa'o'i 24)
   Ranar – Shiga: dd
   • DayofWeek - Shiga: Lahadi = 1, Litinin = 2, Talata = 3, Laraba = 4, Alhamis = 5, Jumma'a = 6, Asabar = 7, Ranar mako = 8, Karshen mako = 9
   • Lokaci - Shigar: hh:mm (amfani da sifili masu jagora, sakanni ana watsi da su) (amfani da tsarin sa'o'i 24) misali:07:30 ko 14:05
   Kwanan wata - Shigar: yy/mm/dd (amfani da manyan sifilai) misali: 20/01/10 na Janairu 10, 2020
   • Relay - Shigar: Lambar Relay da (+ ko -), misali: 01+ don Relay 1 ON ko 01- don Relay 1 KASHE
   Maballin – Shigar: + ko – (na ON ko A KASHE bi da bi)
   Tuta – Shigar: Lambar tuta(opt.+), ko lambar tuta (na ONNA ko KASHE bi da bi)
   Temp - Shigar: >, = ko <darajar; misaliample:>40 (ko da yaushe digiri C)
   • Volts – Shigar: >, = ko <darajar; misaliampda: <10
   Analog – Shigarwar Analog. Shigar da lambar shigarwa da >, = ko < da ƙima. Example: 3<123 (Wannan ƙimar ita ce ɗanyen ƙimar bayanai kafin kowane Mai gyara amfani da shafin nunin shigarwa.)
   Digital – Shigarwar dijital. Shigar da lambar shigarwa, Nau'in, >, =, ko < da ƙima; misaliample: 1F> 7500 (Wannan ƙimar ita ce ƙimar ƙimar data kafin kowane Mai gyara da aka yi amfani da shi akan shafin nuni). Nau'in na iya zama (masu hankali):
   Jihar S (A Kunnawa/Kashe)
   C counter wanda ba a sake saitawa ba
   • c Mai sake saitawa (ƙananan harka 'c')
   • F Frequency a cikin 1/1000 seconds
   • Lokacin P a cikin 1/1000 seconds
8. Logic – Sanya kwatancen dabaru tsakanin Na'ura A da Na'urar B.
   • DA – Gaskiya ne idan: Na'urar A gaskiya ce KUMA Na'urar B gaskiya ce
   • KO – Gaskiya ne idan: Na'urar A gaskiya ce KO Na'urar B gaskiya ce
   BA - Gaskiya ne idan: Na'urar A gaskiya ce kuma Na'urar B BA gaskiya ba ce
9.  Na'ura B - Zaɓi Na'ura B don gwaji daga akwatin digo.
10. Data B - Zaɓi Data B don na'urar da ke sama. Dangane da na'urar da aka zaɓa Bayanan da aka yi amfani da su don gwaji na iya samun kaddarori na musamman. Duba jerin sama.
11.  Na'ura C - shine abin sarrafawa.
12. Data C - Saita dukiya don Na'ura C. Ana amfani da haɗin gwiwa kamar haka:
    Sake KYAUTA - Waɗannan su ne relays akan wannan SERVER. Kuna iya saita har zuwa huɗu a kowane jadawalin. Shigar da waƙafi, misaliampda "1,2,3,4"
    Tuta - Wannan tuta ce ta ajiya wacce za a iya amfani da ita don yin ƙarin hadaddun jadawali. Akwai tutoci guda 8 waɗanda za a iya kunna ko kashe su.
    • REMOTE - Yana nufin sashin SERVER mai nisa. Lokacin da waɗannan sharuɗɗan suka cika, wannan SERVER zai aika umarni don sarrafa SERVER mai nisa. Filin bayanai na naúrar nesa yakamata ya kasance cikin tsari,
    "LAMBAR RAU'AR NAGARI, REMOTE UNIT RELAY". Domin misaliampku, "3,5". Dole ne a gano waɗannan SERVERS masu nisa a cikin Shafin Sanya/Saifin Na'urar Nesa.
    COUNTER - Yana ƙara ƙirga zuwa ma'aunin shigarwar dijital - saita azaman 1 ko 2 dangane da abin da shigarwar dijital ke ƙirgawa.
    LED BLUE – Babu bayanai.
    • imel - Zai aika imel, babu bayanai.
    • SANARWA - Zai aika sanarwa zuwa Kodalert, saita 1-8 don Saituna/Lambar Sanarwa Ƙararrawa. (Ba a Aiwatar da)
13.  Aiki - Abin da za a yi da Na'ura C. Zaɓuɓɓuka sune:
    Kunnawa – Yana Kunna na'urar
    KASHE – Yana Kashe na'urar
    • TGL – Yana canza yanayin Na'ura C
    Sake saitin – Sake saitin CounterR

Shafin rajistan ayyukan
Shafin Logs yana nuna sama da shigarwar 10,000 daga ayyukan da SERVER ko masu amfani da kansu suka yi. Wannan fasalin yana ba da damar ayyuka da yawa don dacewar nunawa da tattara bayanai daga SERVER.

1. Akwatunan rajistan shiga sama da kwanan wata suna ba mai amfani damar tace rajistan ayyukan daga tushe daban-daban. Don tace rajistan ayyukan ba kwa son gani daga wani tushe kawai cire alamar akwatin.
2. Kowane log yana da lambar tunani da lokaci da kwanan wata da aka haɗe a cikin tsarin "yyyy/mm/dd" da "hh:mm:ss". Bayan haka an nuna taron.
3. Don gungurawa cikin rajistan ayyukan, yi amfani da kiban zuwa gefen dama, inda layin sararin sama da kibiya za su kawo maka farkon ko ƙarshen, kibiya biyu tana motsawa sama ko ƙasa shafi, kuma kibiya ɗaya tana motsawa sama ko ƙasa guda ɗaya.
4. Don sabunta rajistan ayyukan da hannu danna maɓallin REFRESH da ke ƙasa bayanan Log.
5. Domin sauke bayanan Log, danna maɓallin DOWNLOAD da ke ƙasa da bayanan Log, wannan yana ba ku damar adana rajistan ayyukan a matsayin daban. file.

Shafi na Shafi na Mai amfani da Admin
Yi amfani da wannan shafin daga menu mai saukar da Saituna. Anan zaku iya saita masu amfani har 3 don tsarin SERVER ɗin ku. A matsayin tsoho mai amfani kawai 1 ke Aiki. Anan zaka iya:

1. Sunan mai amfani da kalmar wucewa - Kowane mai amfani yana da nasu takaddun shaida. A matsayin tsoho an saita waɗannan toadmin/admin, mai amfani2/user2 da mai amfani3/user3 don Masu amfani 1, 2 da 3 bi da bi. Ba a taɓa nuna kalmomin shiga ba. Lura: lokacin da kuka sake saita kalmar wucewa, dole ne ya kasance ƙasa da haruffa 13.
2. Active - Dole ne a bincika don wannan mai amfani ya shiga, ba za ku iya kashe mai amfani 1 ba.
3. Admin - Mai gudanarwa ne kawai zai iya adana bayanai a yawancin shafuka. Wannan yana kare SERVER ɗin ku daga wani mara izini ya canza shi.
4. Lokacin ƙarewa - Ba a kunna ba a wannan lokacin.

Lokaci/Shafin Kwanan wata
Yi amfani da wannan shafin daga menu na Zaɓuɓɓukan Saituna. Wannan shafin yana ba ku damar saita tsarin lokaci da kwanan wata.

1. Lokaci – Saita lokaci ta amfani da tsarin hh:mm:ss.
2. Kwanan wata - Saita kwanan wata ta amfani da tsarin yy/mm/dd.
3. Yankin Lokaci - Saita yankin lokacin da ake so 5 don EST, 8 don PST, yanzu zaku iya ƙara :mm don saita sa'a ɗaya, don ex.ample, 5:30 yanki ne na lokaci a sa'o'i 5 da mintuna 30.
4. Yi amfani da lokacin ajiyar hasken rana - Zaɓi don daidaita lokacin tsarin ku ta atomatik a ranar ajiyar hasken rana. (Ba daidai ba a duk yankunan lokaci.)
5. Yi amfani da Lokacin MIL - Zaɓi don amfani da tsarin awoyi 24.
6. Yi amfani da Sabuntawar NTP - Zaɓi don daidaita lokacin SERVER tare da uwar garken NTP
7.  NTP Web Yanar Gizo – Wannan shine zaɓin uwar garken NTP don ɗaukakawa.
8. Tazarar NTP – Tazarar lokaci tsakanin sabuntawa a cikin mintuna.
9.  Log Event NTP - Kullum keɓanta NTP za a shiga, zaɓi wannan zaɓi don Shiga kowane taron NTP. (Zai iya zama da amfani wajen gyara kuskure.)

Shafin Saituna

Shiga wannan shafin daga menu na zazzagewar Saituna. Zaɓi waɗannan saitunan don kunna fasali daban-daban a cikin SERVER

1. Yi amfani da Babban Mai Aiki - Ba'a amfani da shi. (Zaɓi DAKATARWA don barin aiki.)
2.  Bukatar Shiga – Idan ba a zaɓi SERVER ɗin zai ba da damar duk damar shiga ba tare da takaddun shaida ba.
3. Yi amfani da kewayon IP - Ba a Aiwatar da shi ba.
4. Yi amfani da RESTFUL IP Ranges - Ba a aiwatar da shi ba.
5. Yi amfani da Tsawon IP na Nisa - Ba a aiwatar da shi ba.
6. Yi amfani da Tabbacin RESTful - Bukatar sunan mai amfani da kalmar wucewa don RESTful.
7. Tsawaita kewayon Relay - Yana kunna relays 8.
8. Yi amfani da Maɓallan Relay Relay - Idan an saita, lokacin da aka kunna relay ɗaya, duk sauran ana kashe su.
9. Lambar tashar jiragen ruwa SSL – Ba a goyan bayan – Don amfanin gaba.
10.  Yi amfani da imel na tsarin - Yana ba da damar ƙarin saƙonnin imel.
11. Yi amfani da Fahrenheit - Yana zaɓar Celsius ko Fahrenheit.
12. PGM Dynamic Relays – Yana canza kaddarorin relays a cikin jadawalin aiki.
13.  CLR PGMs akan Fara - Sake fara ayyuka yayin farawa.
14.  RTC Rarraba Zazzabi - Duk allunan Koda na iya ƙara firikwensin zafi da zafi.
15.  Yi amfani da AM2302 - Yi amfani da AM2302 Zazzabi da firikwensin Humidity (an sayar da su daban).
16.  Rahoton Java - Aika bayanai zuwa aikace-aikacen HourCollector akan ethernet (kawai don IoTMeter)
17.  Yi amfani da Metric - Ba a goyan baya - Don amfani na gaba.
18.  Amfanin UART - Shigar da "Audio" don Netbell-NTG, "Agogo" don agogon Netbell.
19.  Canja Kewaya (1/2) - Yin watsi da abubuwan shigar da jiki idan an saita. Domin misaliample, a cikin allon Koda 200, kuna son yin watsi da shigar da canji 1, duba Switch Bypass 1
20.  Saiti 19 - Ba a goyan bayan - Don amfanin gaba
21. Yi amfani da Audio File Tsarin - Kunna mai karanta katin SD don Netbell-NTG
22.  Rahoton WiFi - Kunna canja wurin bayanai akan WiFi (WiFi IoTMeter kawai)
23.  Shafin Saukowa Mai Aiki - Ba a goyan baya - Don amfani na gaba.
24. . Juya Relay Control – An saita gudun ba da sanda zuwa NO ta tsohuwa. Ta hanyar duba wannan akwatin za a juya relay zuwa NC.
25.  Saita 24 – Ba a goyan bayan – Don amfani na gaba.

Dynamic DNS Page
Shiga wannan shafin daga menu na Saita zazzagewa. Daga wannan shafin zaku iya sanya saitunan DNS masu ƙarfi. Wannan shafin, tare da isar da tashar jiragen ruwa da ta dace ta hanyar na'ura mai ba da hanya tsakanin hanyoyin sadarwa, na iya ba da damar shiga duniya zuwa na'ura a bayan na'ura mai ba da hanya tsakanin hanyoyin sadarwa na NAT ko Tacewar zaɓi. Kuna buƙatar sanya adreshin IP na tsaye da lambar tashar tashar jiragen ruwa (duba Shafin Kanfigarewar hanyar sadarwa a shafi na 25) da tashar jiragen ruwa adireshin IP akan na'ura mai ba da hanya tsakanin hanyoyin sadarwa (koma zuwa littafin mai amfani da na'ura mai ba da hanya tsakanin hanyoyin sadarwa). Adireshin IP na intanit dole ne a shirya don samun damar SERVER daga intanit. A halin yanzu kawai sabis ɗin tallan IP ɗin da ke goyan bayan DynDNS ne (https://dyn.com)

1. Yi amfani da DDNS - Yana kunna wannan sabis ɗin.
2. Sabis na DDNS – Zaɓi sabis daga akwatin digo. A halin yanzu kawai sabis ɗin da aka goyan baya shine DynDNS
3.  Sunan mai amfani - Wannan yana nufin asusun da aka saita a Sabis na DDNS.
4. Kalmar wucewa – Kalmar wucewa don samun dama a sabis na DDNS.
5. Mai watsa shiri - Wannan shine sunan IP da aka yiwa rajista a sabis na DDNS don komawa zuwa wannan SERVER

Shafin Saita Imel
Saita asusun imel don SERVER don amfani da shi wajen aika saƙonnin imel daga sassa daban-daban. Samun dama ga wannan shafin daga Saita shafin.
Lura: Wannan rukunin baya jituwa da SSL/TLS, akwai sabar isar da sabar SMTP na ɓangare na uku waɗanda basa buƙatar SSL kuma ana iya amfani da su. Don umarnin yadda ake amfani da sabis na isar da saƙon SMTP na ɓangare na uku, da fatan za a koma zuwa Shafi 1 a ƙarshen wannan littafin).

1. Sabar SMTP – Shigar da uwar garken saƙo mai fita wanda kake son amfani da shi.
2. Port - Wannan ita ce tashar jiragen ruwa akan waccan uwar garken. Kuna iya nemo sabis ɗin wasiku akan layi don wannan bayanin da sauran filayen da aka saita.
3. Yi amfani da SSL – Bar shi ba a bincika ba lokacin da kake amfani da uwar garken SMTP na ɓangare na uku.
4. Sunan mai amfani - Sunan asusun imel ɗin ku.
5. Kalmar wucewa - kalmar sirri ta asusun imel.
6. Don Adireshi – Shigar da adireshi har zuwa 3 don saita wannan imel ɗin. Mai adireshi, CC da BC.
7.  Maudu'i - Layin jigon jigon imel.

Shafin Kanfigareshan hanyar sadarwa
Shiga wannan shafin daga menu na Saita zazzagewa. Wannan shafin yana ba da damar daidaita saitunan cibiyar sadarwar SERVER.
HANKALI: Saitunan da ba daidai ba na iya sa allon ya rasa haɗin yanar gizo. Domin samun damar shiga na'ura a cikin hanyar sadarwar ku daga nesa dole ne ku PORTing na'urar. Wannan yana gaya wa na'ura mai ba da hanya tsakanin hanyoyin sadarwa cewa ya kamata a aika bayanin da ke shigowa zuwa takamaiman na'ura akan hanyar sadarwar ku.

1. Adireshin MAC - Wannan adireshin MAC ne na musamman wanda aka sanya wa wannan samfurin a lokacin taro. Ba za a iya canza shi ba.
2. Sunan Mai watsa shiri - Wannan sunan Netbios ne wanda ana iya magance wannan rukunin a wasu cibiyoyin sadarwa. Hakanan yana iya bayyana a cikin littafin hayar mai ba da hanya tsakanin hanyoyin sadarwa. Yana yin wuri mai fa'ida don sanya sunan SERVER ɗin ku kuma yana bayyana a shafin Gida da kuma akan Mai ganowa.
3. Lambar Port - Wannan ya zama wani ɓangare na adireshin IP kuma yana da mahimmanci don samun damar Intanet. Idan ba'a saita wannan ba, SERVER ɗin ya ɓace zuwa lambar tashar jiragen ruwa 80.
4. Adireshin IP - Yawanci kawai kuna canza rukunin lambobi na ƙarshe. Idan ka canza wannan adireshin IP ka tabbata ka ajiye wannan IP akan na'ura mai ba da hanya tsakanin hanyoyin sadarwa kuma babu wasu na'urori da ke amfani da wannan adireshin IP ko ƙila ba za ka iya isa ga wannan SERVER ba. Idan wannan ya faru kuna iya buƙatar Mayar da Defaults ta amfani da hanyar maɓallin turawa.
5.  Ƙofar Ƙofar - Yawanci mai na'ura mai ba da hanya tsakanin hanyoyin sadarwa akan hanyar sadarwar ku ta TCP/IP wanda ke aiki azaman hanyar shiga zuwa ISP ɗin ku.
6. Subnet Mask - Lamba 32-bit wanda ke rufe adireshin IP, kuma yana rarraba adireshin IP zuwa adireshin cibiyar sadarwa da adireshin masauki. Kawai bar shi a 255.255.255.0
7. Babban DNS - Babban DNS na farko.
8. Na biyu DNS - DNS na biyu.

Shafin Kanfigareshan Range na IP
Shiga wannan shafin daga menu na Saita zazzagewa. Yi amfani da waɗannan saitunan tsaro don zaɓar kewayon adireshin IP wanda za'a ba da izinin shiga SERVER. CAUTION: Saitunan da ba daidai ba na iya sa allon ya rasa haɗin yanar gizo. Ba a aiwatar da wannan SERVER ba.
Shafin na'urori masu nisa
Shiga wannan shafin daga menu na Saita zazzagewa. Waɗannan saitunan suna ba SERVER damar sarrafa relays a kan wani SERVER. Ana yin haka ta hanyar zaɓar na'ura mai nisa a cikin shirin Schedule ko ta hanyar saita relay azaman REMOTE. Akwai yuwuwar wurare 8 REMOTE.
HANKALI: Saitunan da ba daidai ba zai sa allon ya rasa haɗin kai na nesa.

1. Sunan na'ura - Shigar da sunan rubutu don wannan na'urar don tunani na gaba.
2. Adireshin IP - Adireshin IP na na'ura mai nisa ciki har da lambar tashar jiragen ruwa.
3.  Sunan mai amfani - An yi amfani da shi a cikin Tabbacin asali.
4. Kalmar wucewa – An yi amfani da ita a cikin Tabbaci na asali.

Kodalert Page
Har yanzu Ba a Aiwatar da shi ba. Shiga wannan shafin daga menu na Saita zazzagewa. Kodalert yana ba da hanyar dubawa don faɗakarwa na na'urorin haɗin Intanet. Kodalert tushen girgije ne, buɗe tsarin sa ido da faɗakarwa don Intanet na Abubuwa a cikin duniyar ku ta zahiri. Duk wani abu da zai iya aika saƙon imel ko TCP ciki har da SERVERS, sauran na'urori masu ƙera da mutanen da ke amfani da imel na iya amfani da Kodalert. Yana iya aiki don wurare masu nisa da yawa, faɗakar da masu amfani da yawa nan take ta amfani da dokokin da kuka saita ta rubutu, imel, aikace-aikacen wayar hannu na tura sanarwar ko ƙararrawa mai ji nan take lokacin da wani abu ya faru.

1. Lambar Faɗakarwa
2. Gwaji
3. Amfani
4.  Mulki

A cikin shafin Sanarwa na Ƙararrawa, zaku iya canza yanayin (kunna/kashe) na relay ta danna koren da'irar a cikin ginshiƙin jihar. Danna alamar EDIT don canza saitunan ƙararrawa.

Ƙayyadaddun bayanai

Farashin R8G2

• 10M/100M RJ45 Intanit Intanet tare da haɗin haɗi da LEDs ayyuka
• 8 Relay abubuwan fitarwa, 1FORMC 48 Volt Max (24VAC/DC 3A)
• Matsayin LEDs (pulse, bootloader, da gano wuri)
• Ethernet Bootloader (don haɓaka lambar kayan aikin uwar garken)
• PoE ko 12VDC @ 500mA (maras kyau)
• Web dubawa w/tabbacin asali
• Akan zafin jiki na jirgin da voltage firikwensin
  Sake saita / Nemo maɓallin turawa (LED blue)
• Zazzabi na aiki daga 0 zuwa +70 Celsius
• Adana zafin jiki daga 40 zuwa +125 Celsius
• Humidity daga 10% zuwa 80% rashin kwanciyar hankali
• Girma 74mm x 100mm x 20mm, ramukan hawa 64mm x 92mm Ф 3.2mm 4 wurare
• Taimakon ladabi: HTTP/SMTP/SNTP

Farashin R4G2

• 10M/100M RJ45 Intanit Intanet tare da haɗin haɗi da LEDs ayyuka
• 4 1 FormC relays 48 Volt Max (24VAC/DC 3A)
• 2 keɓaɓɓen abubuwan shigar da dijital, 12V 1mA ko zaɓaɓɓen zaɓin cirewa, 2 masu haɗa madaidaiciyar dunƙule tashoshi don kowane.
• 2 Analog 0-5VDC Inputs 30mA 3.3VDC tushen wutar lantarki PTC an kiyaye shi. 3 adaftar dunƙule tashoshi masu haɗawa don kowane (3.3VDC, shigarwa, ƙasa) (R4ADI kawai)
• 2 Abubuwan shigar da firikwensin na yanzu. 3.5mm mai haɗin jack sitiriyo don kowane (R4ADI kawai)
• Matsayin LEDs (pulse, bootloader, da gano wuri)
• Ethernet Bootloader (don haɓaka lambar kayan aikin uwar garken
• POE ko 12VDC @ 500mA (maras kyau)
• Web dubawa w/tabbacin asali
• Akan zafin jiki na jirgin da voltage firikwensin
• Sake saiti/Gano wurin turawa
• Zazzabi na aiki daga 0 zuwa +70 Celsius
• Adana zafin jiki daga 40 zuwa +125 Celsius
• Humidity daga 10% zuwa 80% rashin kwanciyar hankali
• Girma 74mm x 100mm x 20mm, ramukan hawa 64mm x 92mm Ф 3.2mm 4 wurare
• Taimakon ladabi: HTTP/SMTP/SNTP

KODA100

• 10M/100M RJ45 Intanit Intanet tare da haɗin haɗi da LEDs ayyuka
• 2 1-Form-A relay 48VAC@8A Max
• 2 keɓaɓɓen shigarwar dijital na gani, 12V 1mA ko zaɓaɓɓen zaɓi
• Matsayin LEDs (pulse, bootloader, da gano wuri)
• Ethernet Bootloader (don haɓaka lambar kayan aikin uwar garken)
• POE ko 12VDC @ 500mA (maras kyau)
• Web dubawa w/tabbacin asali
•  Akan zafin jiki na jirgin da voltage firikwensin
• Sake saiti/Nemo maɓallin turawa (LED blue)
• Yanayin aiki daga 0 zuwa +70 Celsius
• Zazzabi na ajiya daga 40 zuwa +125 Celsius
• Humidity daga 10% zuwa 80% rashin kwanciyar hankali
• Girma: 70mm x 100mm x 25mm
• Taimakon ladabi: HTTP/SMTP/SNTP

KOD200

• 10M/100M RJ45 Intanit Intanet tare da haɗin haɗi da LEDs ayyuka
• 4 1FormA relays 48 Volt Max 1A bushe lamba ko fitar da 10V ± 10% 50mA zuwa waje na'urorin
• 2 keɓaɓɓen shigarwar dijital na gani, 12V 1mA ko zaɓaɓɓen zaɓi
• Matsayin LEDs (pulse, bootloader, da gano wuri)
• Ethernet Bootloader (don haɓaka lambar kayan aikin uwar garken)
• POE ko 12VDC @ 500mA (maras kyau)
• Web dubawa w/tabbacin asali
• Akan zafin jiki na jirgin da voltage firikwensin
• Sake saiti/Nemo maɓallin turawa (LED blue)
• Zazzabi na aiki daga 0 zuwa +70 Celsius
• Adana zafin jiki daga 40 zuwa +125 Celsius
• Humidity daga 10% zuwa 80% rashin kwanciyar hankali
• Girma: 70mm x 100mm x 25mm
•  Taimakon ladabi: HTTP/SMTP/SNTP

Tsarin Maganar Hukumar

Farashin R8

1. 8 Relay abubuwan fitarwa, 1FORMC 48 Volt Max (24VAC/DC 3A)
2. Mai Rarraba Rj45
3. Mai Haɗin Wuta (12VDC)
4. Maballin Sake saitin
5. Gano Maballin

Farashin R4

1. Abubuwan shigarwa 3.5mm don Sensor na AC na yanzu (R4ADI Kawai)
2. Abubuwan Shigar Analog (R4ADI Kawai)
3. 4 Relay abubuwan fitarwa, 1FORMC 48 Volt Max (24VAC/DC 3A)
4. Abubuwan Shiga na Dijital
5. Canja-canjen Input na Dijital (Mashigar 1 a dama.
   Up: Pullup, Kasa: Warewa)
6.  Mai Rarraba Rj45
7. Maballin Sake saitin
8. Gano Maballin
9.  Mai Haɗin Wuta (12VDC)

Koda 100

1. Abubuwan shigar da dijital (# 1 a hagu) 5VDC-48VDC (12VDC-48VDC dole ne ta yi amfani da resistor na waje)
2. Abubuwan fitarwa (#1 yana hannun dama) 8A@48VAC Max
3. Canja-canjen Input na Dijital (IN 1 a hagu. UP: Warewa, Ƙasa: Jawo)
4. Maballin Sake saitin
5. Maɓallin Sake saukewa (yana kunna LED shuɗi - yana gano akan Mai ganowa)
6. Mai Rarraba Rj45
7. Mai Haɗin Wuta (12VDC)
8. Kebul Mini Connector don Yanayin Zazzabi/Humidity Sensor (an sayar da shi daban)

Koda 200

1. Abubuwan shigar da dijital (# 1 a hagu) 5VDC-48VDC (12VDC-48VDC dole ne ta yi amfani da resistor na waje)
2. Sakamakon Relay (# 1 yana hagu) 48 Volt Max 1A busassun lamba ko tuƙi 10V ± 10% 50mA
3. Canja-canjen Input na Dijital (IN 1 a hagu. UP: Warewa, Ƙasa: Jawo)
4.  Relay Switches (Sama don busasshiyar lamba, ƙasa don 10V/50mA)
5. Maballin Sake saitin
6.  Maɓallin Sake saukewa (yana kunna LED shuɗi - yana gano akan Mai ganowa)
7. Mai Rarraba Rj45
8.  Mai Haɗin Wuta (12VDC)
9. Kebul Mini Connector don Yanayin Zazzabi/Humidity Sensor (an sayar da shi daban)

Sake saitin masana'anta
Don yin Sake saitin masana'anta, danna maɓallin Sake saitin. Lokacin da koren LED ya kunna, danna kuma riƙe maɓallin Reload har sai LED mai walƙiya ya kashe sannan ya kunna da ƙarfi. Koma zuwa sashin Tsarin Magana na Board don wuraren maɓalli akan na'urarka.

Wannan jagorar mai amfani yana haɓaka takaddun don samfuran Linortek masu zuwa:

• Netbell-2
• Netbell-8
• Netbell-K (da bambance-bambancen karatu)
• iTrixx-NHM

Don ƙarin bayani, takardu da yadda ake yin bidiyo, ziyarci https://www.linortek.com/downloads/
Ana iya samun wannan takarda a www.linortek.com/downloads/documentations/
Idan kuna buƙatar taimako da na'urar ku ziyarci www.linortek.com/technical-support
Linor Technology, Inc. girma
Bayanan da ke ƙarƙashin canzawa ba tare da sanarwa ba.

Shafi 1

Yadda ake Aika Saƙon Imel na SSL Ta Amfani da Sabis na SMTP na ɓangare na uku don Linortek Fargo da Na'urorin Koda
Ta hanyar tsoho, na'urorin Koda/Fargo suna amfani da sabar imel SMTP maras SSL. Amma yawancin sabar imel a yau sun canza zuwa ka'idar tsaro ta SSL, akwai sabar isar da sabar SMTP na ɓangare na uku waɗanda ba sa buƙatar SSL kuma ana iya amfani da su. Akwai masu bada sabis na imel na SMTP da yawa a kasuwa. Muna amfani da SMTP3GO azaman exampdon nuna tsarin saitin. SMTP2GO kyauta ne don amfani da har zuwa imel 1000 / wata. Don amfani da SMTP2GO, da fatan za a ziyarci: https://www.smtp2go.com/ .
Mataki 1. Ƙirƙiri asusun SMTP2GO.
Don ƙirƙirar asusu kawai danna "Yi rajista", zaɓi "Imel na 1K" akan sikelin, kuma zaɓi "Shirin Kyauta" (Idan kuna buƙatar aika imel sama da 1000 kowane wata, zaɓi tsarin da ya dace da bukatunku.)

Don ƙirƙirar asusu akan SMTP2GO, za a buƙaci adireshin imel na kamfani. Sabis na imel na kyauta kamar Gmail ko Yahoo ba zai bari ka ci gaba ba. Bayan kunna asusun ku na SMTP2GO, kuna buƙatar ƙara mai amfani.
Mataki 2. Ƙara mai amfani.
Mai amfani da kuka ƙirƙira akan SMTP2GO, zai zama uwar garken wasiƙar mai fita lokacin da kuka saita na'urar Fargo/Koda don aika rahotannin imel, da fatan za ku tabbata uwar garken imel ɗin kamfanin ku ba zai toshe imel ɗin ba idan kuna amfani da asusun imel kyauta kamar Yahoo ko Gmail zuwa ƙara mai amfani anan.
Shiga cikin asusunka na SMTP2GO, a gefen hagu menu zaɓi "Settings"> "SMTP Users", Danna kan "Ƙara mai amfani da SMTP" kuma cika fom.

Bayan an ƙara mai amfani zuwa asusun ku na SMTP2GO, zai nuna bayanin da kuke buƙata don saita sanarwar imel akan na'urorin Fargo/Koda.

Mataki 3. Sanya na'urar Linortek.
Bayan kun ƙirƙiri asusu kuma ƙara mai amfani, shiga cikin na'urar ku ta Linortek, kewaya zuwa Ƙirƙiri - Shafin saitin imel don saita sanarwar Imel:

• Sabar SMTP – Shigar da sabar saƙo mai fita da kake son amfani da ita, mail.smtp2go.com ce a cikin tsohon mu.ample.
• Port - Wannan ita ce tashar jiragen ruwa akan waccan uwar garken. Tashar tashar SMTP ita ce 2525 a cikin tsohon muample.
• Yi amfani da SSL – Bar shi ba a bincika ba lokacin da kake amfani da uwar garken SMTP na ɓangare na uku.
• Sunan mai amfani - Sunan mai amfani daga SMTP2GO lokacin da muka ƙirƙiri mai amfani a mataki na baya.
• Kalmar wucewa – Kalmar wucewa ta mai amfani daga SMTP2GO lokacin da muka ƙirƙiri mai amfani a mataki na baya.
• Don Adireshi – Shigar da adireshi har 3 don saita wannan imel ɗin. Mai adireshi, CC da BC.
• Maudu'i - Layin jigon jigon imel.
  

Da zaran ka buga "Ajiye/Test", na'urar tana aika imel ɗin gwaji ta atomatik. Da fatan za a duba Junk/Wani babban fayil don nemo ta idan baya cikin babban fayil ɗin Inbox.
Mataki 4. Saita aikin don sanarwar Imel ta atomatik.
Ya kamata ku sami damar karɓar sanarwar imel don abubuwa daban-daban daga allunan Fargo/Koda a wannan lokacin. Idan kuna buƙatar karɓar sanarwar dabaru na yanayi, zaku iya amfani da ƙa'idodin yanayin mu don saita irin wannan rahoton. Don saita sanarwar sanarwar yanayin tunani, je zuwa shafin Ɗawainiya akan na'urar Fargo/Koda, danna alamar Gyaran Jadawalin. Don cikakkun bayanai na yadda ake ƙirƙirar taron tushen dabaru, da fatan za a koma zuwa Saitin Jadawalin Shafi akan Manual mai amfani na Fargo/Koda, wanda za'a iya saukewa anan:
https://www.linortek.com/download/fargo%20g2_koda%20downloads/fargo%20g2_koda%20documentation/Fargo-G2-and-Koda-User-Manual.pdf
A cikin wannan sampZa mu yi amfani da na'urar Mitar Sa'a ta hanyar sadarwa a matsayin tsohonampdon yadda ake karɓar rahotannin imel kowace rana a 11:52 na safe.

Da zaran duk sharuɗɗan aikin sun cika, kuna samun imel mai zuwa:

Rahoton Karatun Sa'a
support@linortek.com
Litinin 4/11/2022 11:52 Na safe
Zuwa: Liyu Nalven
HM 1, injina, yana a 000242.01 hours.
Amsa Gaba

Takardu / Albarkatu

LINORTEK Fargo G2 TCP/IP Web Tushen Mai Kula da Relay [pdf] Manual mai amfani Fargo G2, Koda, Fargo G2 TCP-IP Web Mai Gudanar da Relay na tushen, Web Tushen Mai Kula da Relay, Mai Gudanar da Relay Mai Gudanarwa, Mai Kula da Relay

Magana

• Manual mai amfani