Bardac tsav T2-ENCOD-IN encoder Tus neeg siv interface
Qhov kev xaiv no tsim nyog rau kev siv ntawm cov khoom lag luam hauv qab no:
Bardac P2 Tsav
T2-ENCOD-IN (5 Volt TTL Version)
T2-ENCHT-IN (8 - 30 Volt HTL Version)
TTL Version: 5V TTL - A & B Channel nrog qhuas
HTL Version 24V HTL - A & B Channel nrog Kev Pom Zoo: +24V HTL encoder xav tau cov khoom siv sab nraudtage
Input zaus: 500kHz
Ib puag ncig: 0◦C - +50◦C
Terminal Torque: 0.5Nm (4.5 Ib-in)
- LED A qhia lub zog
- LED B qhia txog qhov teeb meem ntawm kev teeb tsa.
- Option Module muab tso rau hauv lub tsav Option Module Chaw nres nkoj (thov saib daim duab rov qab).
- Tsis txhob siv lub zog tsis tsim nyog hauv kev ntxig qhov kev xaiv module rau hauv qhov chaw xaiv xaiv.
- Xyuas kom tseeb tias qhov kev xaiv module haum ruaj ntseg ua ntej lub hwj chim ntawm tus tsav.
- Tshem tawm lub davhlau ya nyob twg thaiv header los ntawm kev xaiv module ua ntej kom nruj kev sib txuas. Hloov thaum txuas txuas tiav. Tighten rau Torque qhov chaw muab hauv Specifications.
Daim ntawv tshaj tawm EU ntawm kev ua raws yog muaj nyob rau ntawm kev thov los ntawm koj tus neeg muag khoom Bardac Drives.
- Zuag qhia tag nrho Shielded twisted khub cable siv
- Shield yuav tsum txuas nrog av (PE) ob qho kawg
- P1-09: Lub cev muaj zog ntsuas zaus (pom nyob ntawm daim ntawv tsav tsheb).
- P1-10: Lub cev muaj zog ntsuas ceev (pom nyob rau ntawm daim ntawv tsav tsheb).
- P6-06: Encoder PPR tus nqi (sau tus nqi rau tus encoder txuas).
Cov kauj ruam hauv qab no qhia txog qhov pom zoo commissioning ib ntus, piv txwv li tus encoder raug txuas nrog tus tsav
- P1-07 – Lub cev muaj zog Rated Voltage
- P1-08 - Lub cev muaj zog ntsuas tam sim no
- P1-09 - Lub cev muaj zog ntsuas zaus
- P1-10 - Tsav Rated Ceev
2) Txhawm rau kom nkag mus rau cov kev txwv siab heev uas xav tau, teeb tsa P1-14 = 201
3) Xaiv Vector Ceev Tswj hom los ntawm kev teeb tsa P4-01 = 0
4) Ua ib qho Auto-tune los ntawm kev teeb tsa P4-02 = 1
5) Thaum Auto-tune tiav lawm, tus tsav yuav tsum tau khiav mus rau pem hauv ntej nrog kev siv ceev ceev (xws li 2 - 5Hz). Xyuas kom lub cev muaj zog ua haujlwm kom raug thiab du.
6) Txheeb xyuas tus nqi Encoder Feedback hauv P0-58. Nrog rau kev tsav tsheb khiav mus rau pem hauv ntej, tus nqi yuav tsum yog qhov zoo, thiab ruaj khov nrog kev sib txawv ntawm + / - 5% siab tshaj plaws. Yog tias tus nqi hauv qhov ntsuas no yog qhov zoo, cov kab hluav taws xob encoder yog qhov tseeb. Yog tias tus nqi tsis zoo, qhov kev tawm tswv yim nrawm yog thim rov qab. Txhawm rau kho qhov no, thim rov qab A thiab B teeb liab channel los ntawm tus encoder.
7) Kev sib txawv ntawm cov zis tawm nrawm yuav tsum ua rau tus nqi ntawm P0-58 hloov pauv kom muaj kev cuam tshuam qhov kev hloov ntawm lub cev muaj zog tiag tiag. Yog tias qhov no tsis yog qhov teeb meem, tshawb xyuas cov xaim ntawm tag nrho cov system.
8) Yog tias qhov kev kuaj xyuas saum toj no dhau lawm, kev tawm tswv yim tswj kev ua haujlwm tuaj yeem qhib los ntawm kev teeb tsa P6-05 rau 1.
Cov ntaub ntawv / Cov ntaub ntawv
 |
Bardac tsav T2-ENCOD-IN Encoder Interface [ua pdf] Cov neeg siv phau ntawv qhia T2-ENCOD-IN, T2-ENCHT, T2-ENCOD-IN Encoder Interface, T2-ENCOD-IN, Encoder Interface, Interface |