Cov ntsiab lus zais
1 Intel UG-01173 Fault Injection FPGA IP Core
2 Fault Injection Intel® FPGA IP Core Tus Neeg Siv Qhia
3 Cov ntaub ntawv / Cov ntaub ntawv
3.1 Cov ntaub ntawv
4 Related Posts

Intel-logo

Intel UG-01173 Fault Injection FPGA IP Core

intel-UG-01173-Fault-Injection-FPGA-IP-Core-fig-PRODUCT

Fault Injection Intel® FPGA IP Core Tus Neeg Siv Qhia

Qhov Txhaum Txhaum Intel® FPGA IP core txhaj cov yuam kev rau hauv kev teeb tsa RAM (CRAM) ntawm FPGA ntaus ntawv. Cov txheej txheem no simulates mos yuam kev uas yuav tshwm sim thaum lub sij hawm ib txwm ua hauj lwm vim ib qho kev tshwm sim upsets (SEUs). SEUs yog cov xwm txheej tsis tshua muaj thiab yog li nyuaj rau kev sim. Tom qab koj instantiate Fault Injection IP core rau hauv koj tus qauv tsim thiab teeb tsa koj lub cuab yeej, koj tuaj yeem siv Intel Quartus® Prime Fault Injection Debugger cov cuab yeej los ua kom txhob txwm yuam kev hauv FPGA los ntsuas lub kaw lus teb rau qhov yuam kev no.

Cov ntaub ntawv ntsig txog

  • Ib qho xwm txheej ntxhov siab
  • AN 737: SEU Kev Tshawb Nrhiav thiab Rov Qab Hauv Intel Arria 10 Devices

Nta

  • Tso cai rau koj los soj ntsuam cov lus teb rau kev txo qis ib qho kev cuam tshuam ua haujlwm cuam tshuam (SEFI).
  • Tso cai rau koj ua SEFI tus cwj pwm hauv tsev, tshem tawm qhov kev xav tau rau tag nrho cov kab hluav taws xob ntsuas. Hloov chaw, koj tuaj yeem txwv qhov kev sim beam rau kev ua tsis tiav hauv lub sijhawm (FIT) / Mb ntsuas ntawm qib ntaus ntawv.
  • Scale FIT tus nqi raws li SEFI tus yam ntxwv uas cuam tshuam rau koj tus qauv tsim. Koj tuaj yeem faib cov kev txhaj tshuaj txhaum thoob plaws hauv tag nrho cov cuab yeej, lossis txwv lawv cov chaw ua haujlwm kom ua haujlwm kom ceev.
  • Txhim kho koj tus qauv tsim kom txo tau kev cuam tshuam los ntawm ib qho xwm txheej ntxhov siab (SEU).

Kev them nyiaj yug ntaus ntawv

Lub Fault Injection IP core txhawb Intel Arria® 10, Intel Cyclone® 10 GX thiab Stratix® V tsev neeg cov khoom siv. Cyclone V tsev neeg txhawb kev Txhaum Txhaum rau ntawm cov khoom siv nrog -SC cov lus nyob rau hauv cov cai xaj. Hu rau koj tus neeg muag khoom hauv zos rau kev xaj cov ntaub ntawv ntawm -SC suffix Cyclone V li.

Kev siv nyiaj txiag thiab kev ua haujlwm
Intel Quartus Prime software tsim cov peev txheej hauv qab no kwv yees rau Stratix V A7 FPGA. Cov txiaj ntsig rau lwm yam khoom siv zoo sib xws.

Intel Corporation. Txhua txoj cai. Intel, Intel logo, thiab lwm yam Intel cov cim yog cov cim lag luam ntawm Intel Corporation lossis nws cov koom haum. Intel lav kev ua tau zoo ntawm nws cov FPGA thiab cov khoom lag luam semiconductor rau cov kev qhia tshwj xeeb tam sim no raws li Intel tus qauv kev lees paub, tab sis muaj txoj cai los hloov cov khoom thiab cov kev pabcuam txhua lub sijhawm yam tsis muaj ntawv ceeb toom. Intel xav tias tsis muaj lub luag haujlwm lossis kev lav phib xaub uas tshwm sim los ntawm daim ntawv thov lossis siv cov ntaub ntawv, cov khoom lag luam, lossis cov kev pabcuam uas tau piav qhia hauv no tshwj tsis yog raws li tau pom zoo hauv kev sau ntawv los ntawm Intel. Intel cov neeg siv khoom tau qhia kom tau txais qhov tseeb version ntawm cov cuab yeej tshwj xeeb ua ntej tso siab rau cov ntaub ntawv tshaj tawm thiab ua ntej muab xaj rau cov khoom lossis cov kev pabcuam. * Lwm lub npe thiab hom yuav raug lees paub raws li cov cuab yeej ntawm lwm tus.

Fault Txhaj IP Core FPGA Kev Ua Haujlwm thiab Kev Siv Khoom Siv

Ntaus ntawv ALMs Logic Registers M20K
Thawj Secondary
Stratix V A7 3,821 5,179 0 0

Intel Quartus Prime software installation suav nrog Intel FPGA IP tsev qiv ntawv. Lub tsev qiv ntawv no muab ntau cov txiaj ntsig IP rau koj siv ntau lawm yam tsis tas yuav muaj daim ntawv tso cai ntxiv. Qee qhov Intel FPGA IP cores yuav tsum tau yuav daim ntawv tso cai cais rau kev siv ntau lawm. Intel FPGA IP Kev Ntsuam Xyuas Hom tso cai rau koj los soj ntsuam cov ntawv tso cai Intel FPGA IP cores hauv kev simulation thiab kho vajtse, ua ntej txiav txim siab yuav khoom tag nrho cov ntawv tso cai IP core. Koj tsuas yog yuav tsum tau yuav daim ntawv tso cai tsim tawm tag nrho rau cov ntawv tso cai Intel IP cores tom qab koj ua tiav kev sim kho vajtse thiab npaj siv IP hauv kev tsim khoom. Intel Quartus Prime software nruab IP cores hauv cov chaw hauv qab no los ntawm lub neej ntawd:

IP Core Installation Txoj Kev

intel-UG-01173-Fault-Injection-FPGA-IP-Core-fig-1

IP Core Installation Qhov chaw

Qhov chaw Software Platform
:\intelFPGA_pro\quartus\ip\altera Intel Quartus Prime Pro Edition Qhov rai*
:\intelFPGA\quartus\ip\altera Intel Quartus Prime Standard Edition Qhov rai
:/intelFPGA_pro/quartus/ip/altera Intel Quartus Prime Pro Edition Linux *
:/intelFPGA/quartus/ip/altera Intel Quartus Prime Standard Edition Linux

Nco tseg: Intel Quartus Prime software tsis txhawb qhov chaw hauv txoj kev teeb tsa.

Customizing thiab tsim IP Cores
Koj tuaj yeem hloov kho IP cores los txhawb ntau yam kev siv. Intel Quartus Prime IP Catalog thiab parameter editor tso cai rau koj xaiv sai sai thiab teeb tsa tus IP chaw nres nkoj, nta, thiab tso zis files.

IP Catalog thiab Parameter Editor
IP Catalog qhia txog IP cores muaj rau koj qhov project, suav nrog Intel FPGA IP thiab lwm tus IP uas koj ntxiv rau IP Catalog nrhiav txoj hauv kev.

  • Lim IP Catalog kom Qhia IP rau tsev neeg siv khoom siv lossis Qhia IP rau txhua tsev neeg. Yog tias koj tsis muaj qhov project qhib, xaiv Cov Khoom Siv Tsev Neeg hauv IP Catalog.
  • Ntaus hauv Kev Tshawb Fawb txhawm rau txheeb xyuas cov npe tag nrho lossis ib feem IP lub npe hauv IP Catalog.
  • Txoj cai-nias tus IP core lub npe hauv IP Catalog los tso saib cov ntsiab lus hais txog cov khoom siv txhawb nqa, qhib IP core's installation nplaub tshev, thiab txuas rau cov ntaub ntawv IP.
  • Nyem Nrhiav rau Partner IP to access partner IP information on the web.

Lub parameter editor qhia koj kom qhia meej tus IP hloov npe, xaiv qhov chaw nres nkoj, thiab tso zis file tiam kev xaiv. Cov parameter editor tsim cov qib siab tshaj Intel Quartus Prime IP file (.ip) rau qhov kev hloov pauv IP hauv Intel Quartus Prime Pro Edition cov haujlwm. Tus parameter editor tsim ib theem sab saum toj Quartus IP file (.qip) rau qhov kev hloov pauv IP hauv Intel Quartus Prime Standard Edition cov haujlwm. Cov no files sawv cev rau qhov sib txawv ntawm tus IP hauv qhov project, thiab khaws cov ntaub ntawv parameterization.

IP Parameter Editor (Intel Quartus Prime Standard Edition)intel-UG-01173-Fault-Injection-FPGA-IP-Core-fig-2

IP Core Generation Output (Intel Quartus Prime Pro Edition)

Intel Quartus Prime software tsim cov zis hauv qab no file qauv rau tus kheej IP cores uas tsis yog ib feem ntawm Platform Designer system.

Tus kheej IP Core Generation Output (Intel Quartus Prime Pro Edition)intel-UG-01173-Fault-Injection-FPGA-IP-Core-fig-3

  • Yog tias muaj kev txhawb nqa thiab qhib rau koj tus IP core variation.

Tso zis Files ntawm Intel FPGA IP Generation

File Lub npe Kev piav qhia
<koj_ip>.ip Sab saum toj-theem IP variation file uas muaj cov parameterization ntawm tus IP core hauv koj qhov project. Yog hais tias tus IP variation yog ib feem ntawm lub Platform Designer system, parameter editor kuj generates ib .qsys. file.
<koj_ip>.cmp VHDL Component Tshaj Tawm (.cmp) file yog ntawv file uas muaj cov ntsiab lus hauv zos thiab chaw nres nkoj uas koj siv hauv VHDL tsim files.
<koj_ip>_generation.rpt IP lossis Platform Designer tiam cav file. Qhia cov ntsiab lus ntawm cov lus thaum lub sijhawm IP tsim.
txuas ntxiv…
File Lub npe Kev piav qhia
<koj_ip>.qgsimc (Platform Designer systems xwb) Simulation caching file uas piv cov .qsys thiab .ip files nrog cov parameterization tam sim no ntawm Platform Designer system thiab IP core. Qhov kev sib piv no txiav txim siab seb Platform Designer tuaj yeem hla rov tsim dua HDL.
<koj_ip>.qgsynth (Platform Designer systems xwb) Synthesis caching file uas piv cov .qsys thiab .ip files nrog cov parameterization tam sim no ntawm Platform Designer system thiab IP core. Qhov kev sib piv no txiav txim siab seb Platform Designer tuaj yeem hla rov tsim dua HDL.
<koj_ip>.qib Muaj tag nrho cov ntaub ntawv los sib sau ua ke thiab suav nrog IP tivthaiv.
<koj_ip>.tsv Muaj cov ntaub ntawv hais txog kev hloov kho cov xwm txheej ntawm IP tivthaiv.
.bsf ua Ib lub cim sawv cev ntawm IP variation rau siv hauv Block Diagram Files (.bdf).
<koj_ip>.spd Tswv yim file uas ip-make-simscript yuav tsum tau tsim cov ntawv simulation. Cov .spd file muaj ib daim ntawv teev npe files koj tsim rau simulation, nrog rau cov ntaub ntawv hais txog kev nco uas koj pib.
<koj_ip>.ppf Pin Planner File (.ppf) khaws cov chaw nres nkoj thiab node assignments rau IP Cheebtsam uas koj tsim rau siv nrog tus Pin Planner.
<koj_ip>_bb.v Siv lub Verilog blackbox (_bb.v) file raws li qhov khoob module tshaj tawm rau kev siv los ua blackbox.
<koj_ip>_inst.v or _inst.vhd HDL ua exampthiab instantiation template. Luam thiab paste cov ntsiab lus ntawm qhov no file nyob rau hauv koj HDL file kom instantiate tus IP variation.
<koj_ip>.regmap Yog tias tus IP muaj cov ntaub ntawv sau npe, Intel Quartus Prime software tsim cov .regmap file. The .regmap file piav qhia txog daim ntawv qhia kev sau npe ntawm tus tswv thiab qhev interfaces. Qhov no file ntxiv

cov .sopcinfo file los ntawm kev muab cov ncauj lus kom ntxaws ntxiv txog kev sau npe ntawm qhov system. Qhov no file enables register zaub views thiab cov neeg siv cov txheeb cais hloov tau hauv System Console.
<koj_ip>.svd Tso cai rau HPS System Debug cov cuab yeej rau view daim ntawv teev npe ntawm cov khoom siv txuas mus rau HPS hauv Platform Designer system.

Thaum lub sij hawm synthesis, Intel Quartus Prime software khw muag khoom .svd files rau qhev interface pom rau System Console masters hauv .sof file nyob rau hauv lub rooj sib tham debug. System Console nyeem tshooj no, uas Platform Designer queries rau sau npe daim ntawv qhia cov ntaub ntawv. Rau cov qhev system, Platform Designer nkag mus rau cov npe los ntawm lub npe.
<koj_ip>.v

<koj_ip>.vhd

 HDL files uas instantiate txhua submodule los yog me nyuam IP core rau synthesis los yog simulation.
tus cob qhia/ Muaj ib tsab ntawv msim_setup.tcl los teeb tsa thiab khiav qhov simulation.
aldec/ Muaj ib tsab ntawv rivierapro_setup.tcl los teeb tsa thiab khiav qhov simulation.
/synopsys/vcs

/synopsys/vcsmx

 Muaj lub plhaub ntawv vcs_setup.sh los teeb tsa thiab khiav qhov simulation.

Muaj cov ntawv plhaub vcsmx_setup.sh thiab synopsys_sim.setup file teeb tsa thiab khiav ib simulation.
/cadence Muaj cov ntawv plhaub ncsim_setup.sh thiab lwm yam teeb tsa files teeb thiab khiav ib simulation.
/xcelium Muaj ib qho Parallel simulator plhaub tsab ntawv xcelium_setup.sh thiab lwm yam teeb tsa files teeb thiab khiav ib simulation.
/ submodules Muaj HDL files rau IP core submodule.
<IP submodule>/ Platform Designer generates / synth thiab /sim sub-directories rau txhua tus IP submodule directory uas Platform Designer generates.

Functional Description
Nrog rau qhov Fault Injection IP core, cov neeg tsim qauv tuaj yeem ua SEFI tus cwj pwm hauv tsev, ntsuas FIT tus nqi raws li SEFI tus cwj pwm, thiab txhim kho cov qauv tsim kom txo tau cov txiaj ntsig ntawm SEUs.

Ib qho xwm txheej ntxhov siab Mitigation

Integrated circuits thiab programmable logic li xws li FPGAs raug rau SEUs. SEUs yog random, nondestructive txheej xwm, tshwm sim los ntawm ob loj qhov chaw: alpha hais thiab neutrons los ntawm cosmic rays. Radiation tuaj yeem ua rau lub logic register, embedded memory me ntsis, los yog ib tug configuration RAM (CRAM) me ntsis kom tig nws lub xeev, yog li ua rau kev npaj txhij txog ntaus ntawv. Intel Arria 10, Intel Cyclone 10 GX, Arria V, Cyclone V, Stratix V thiab cov cuab yeej tshiab muaj peev xwm CRAM hauv qab no:

  • Kev Tshawb Fawb Kev Tshawb Fawb Kev Tshawb Fawb Kev Tshawb Fawb (EDCRC)
  • Tsis siv neeg kho qhov chim siab CRAM (scrubbing)
  • Muaj peev xwm los tsim kev ntxhov siab CRAM (kev txhaj tshuaj txhaum cai)

Yog xav paub ntxiv txog kev txo qis hauv SEU hauv Intel FPGA cov khoom siv, xa mus rau SEU Mitigation tshooj hauv phau ntawv qhia khoom siv.

Fault Txhaj IP Pin Description

Qhov Txhaum Txhaum IP core suav nrog I / O pins hauv qab no.

Fault Txhaj IP Core I/O Pins

Pin npe Tus Pin Qhia Pin Description
crcerror_pin nkag Cov tswv yim los ntawm Cov Lus Qhia yuam kev Sau npe Unloader Intel FPGA IP (EMR Unloader IP). Cov teeb liab no tau lees paub thaum CRC qhov yuam kev tau raug kuaj pom los ntawm lub cuab yeej EDCRC.
emr_data nkag Error Message Register (EMR) cov ntsiab lus. Xa mus rau phau ntawv qhia khoom tsim nyog rau EMR teb.

Cov tswv yim no ua raws li Avalon Streaming cov ntaub ntawv interface teeb liab.
emr_ siv nkag Qhia cov emr_data inputs muaj cov ntaub ntawv siv tau. Qhov no yog Avalon Streaming siv tau interface teeb liab.
Rov pib dua nkag Module reset input. Qhov rov pib dua yog tswj hwm los ntawm Fault Injection Debugger.
yuam kev_injected tso zis Qhia tias qhov yuam kev raug txhaj rau hauv CRAM raws li tau hais los ntawm JTAG interface. Lub sijhawm ntev npaum li cas cov teeb liab lees paub nyob ntawm koj qhov chaw ntawm JTAG TCK thiab tswj cov teeb liab thaiv. Feem ntau, lub sijhawm yog nyob ib ncig ntawm 20 lub voj voog ntawm TCK teeb liab.
yuam kev_scrubbed tso zis Qhia tias cov cuab yeej txhuam kom tiav raws li tau hais los ntawm JTAG interface. Lub sijhawm ntev npaum li cas cov teeb liab lees paub nyob ntawm koj qhov chaw ntawm JTAG TCK thiab tswj cov teeb liab thaiv. Feem ntau, lub sijhawm yog nyob ib ncig ntawm 20 lub voj voog ntawm TCK teeb liab.
kev insc tso zis Xaiv cov zis. Qhov Txhaum Txhaum IP siv lub moos no, piv txwv liample, rau moos EMR_unloader thaiv.

Fault Txhaj IP Pin Diagram

intel-UG-01173-Fault-Injection-FPGA-IP-Core-fig-4

Siv Fault Injection Debugger thiab Fault Injection IP Core

Lub Fault Injection Debugger ua haujlwm ua ke nrog Fault Injection IP core. Ua ntej, koj instantiate tus IP core hauv koj tus qauv tsim, sau ua ke, thiab rub tawm cov teeb tsa tshwm sim file rau hauv koj lub cuab yeej. Tom qab ntawd, koj khiav qhov Fault Injection Debugger los ntawm hauv Intel Quartus Prime software lossis los ntawm kab hais kom ua rau simulate qhov yuam kev.

  • Qhov Fault Injection Debugger tso cai rau koj los ua qhov kev sim tshuaj txhaum kev sib tham sib tham lossis los ntawm cov lus txib batch, thiab tso cai rau koj los qhia meej txog cov laj thawj hauv koj qhov tsim rau kev txhaj tshuaj txhaum cai.
  • Qhov kev hais kom ua-kab interface muaj txiaj ntsig zoo rau kev khiav lub debugger ntawm tsab ntawv.

Nco tseg

Qhov Kev Txhaum Txhaum Cai Debugger sib txuas lus nrog Fault Injection IP core ntawm JTAG interface. Qhov Txhaum Txhaum IP lees txais cov lus txib los ntawm JTAG interface thiab tshaj tawm cov xwm txheej rov qab los ntawm JTAG interface. Qhov Kev Txhaum Txhaum IP core yog siv hauv cov logic mos hauv koj lub cuab yeej; Yog li ntawd, koj yuav tsum suav rau qhov kev siv logic hauv koj tus qauv tsim. Ib txoj hauv kev yog los qhia koj tus qauv tsim cov lus teb rau SEU hauv chav kuaj thiab tom qab ntawd tshem tawm cov tub ntxhais IP los ntawm koj qhov kev tsim tawm kawg.

Koj siv Fault Injection IP cores nrog cov hauv qab no IP cores:

  • Cov Lus Ceeb Toom Txog Kev Sau Npe Unloader IP core, uas nyeem thiab khaws cov ntaub ntawv los ntawm cov khoom siv hluav taws xob tsis zoo hauv Intel FPGA.
  • (Optional) Advanced SEU Detection Intel FPGA IP core, uas sib piv ib-ntsis yuam kev qhov chaw mus rau ib daim ntawv qhia rhiab heev thaum lub sij hawm ua hauj lwm ntaus ntawv los txiav txim seb ib tug mos yuam kev cuam tshuam rau nws.

Fault Txhaj Debugger dhauview Thaiv tau Diagramintel-UG-01173-Fault-Injection-FPGA-IP-Core-fig-5

Nco tseg:

  1. Qhov Kev Txhaum Txhaum IP hloov cov khoom ntawm lub hom phiaj logic.
  2. Qhov Kev Txhaum Txhaum Cai Debugger thiab Advanced SEU Detection IP siv tib EMR Unloader piv txwv.
  3. Advanced SEU Detection IP core yog xaiv tau.

Cov ntaub ntawv ntsig txog

  • Hais txog SMH Files paj 13
  • Hais txog EMR Unloader IP Core ntawm nplooj 10
  • Hais txog Advanced SEU Detection IP Core ntawm nplooj 11

Instantiating Fault Injection IP Core

Nco tseg

Qhov Kev Txhaum Txhaum IP core tsis xav kom koj teeb tsa ib qho kev txwv. Txhawm rau siv tus tub ntxhais IP, tsim ib qho piv txwv IP tshiab, suav nrog hauv koj lub Platform Designer (Standard) system, thiab txuas cov teeb liab raws li qhov tsim nyog. Koj yuav tsum siv Fault Injection IP core nrog EMR Unloader IP core. Kev Txhaum Txhaum Cai thiab EMR Unloader IP cores muaj nyob rau hauv Platform Designer thiab IP Catalog. Optionally, koj tuaj yeem instantiate lawv ncaj qha rau hauv koj tus qauv RTL, siv Verilog HDL, SystemVerilog, lossis VHDL.

Hais txog EMR Unloader IP Core
EMR Unloader IP core muab qhov cuam tshuam rau EMR, uas tau hloov kho tas li los ntawm lub cuab yeej EDCRC uas kuaj xyuas cov cuab yeej CRAM cov khoom CRC rau qhov tsis raug muag.

Example Platform Designer System suav nrog Fault Injection IP Core thiab EMR Unloader IP Coreintel-UG-01173-Fault-Injection-FPGA-IP-Core-fig-6

Example Fault Injection IP Core thiab EMR Unloader IP Core Block Diagram

intel-UG-01173-Fault-Injection-FPGA-IP-Core-fig-7

Cov ntaub ntawv ntsig txog
Error Message Register Unloader Intel FPGA IP Core User Guide

Hais txog Advanced SEU Detection IP Core

Siv Advanced SEU Detection (ASD) IP core thaum SEU kam rau ua yog qhov kev txhawj xeeb tsim. Koj yuav tsum siv EMR Unloader IP core nrog ASD IP core. Yog li ntawd, yog tias koj siv ASD IP thiab Fault Injection IP nyob rau hauv tib tus qauv, lawv yuav tsum muab cov EMR Unloader tso zis los ntawm Avalon®-ST splitter tivthaiv. Cov duab hauv qab no qhia txog Platform Designer system uas Avalon-ST splitter faib cov ntsiab lus EMR rau ASD thiab Fault Injection IP cores.

Siv ASD thiab Fault Injection IP hauv Tib Platform Designer Systemintel-UG-01173-Fault-Injection-FPGA-IP-Core-fig-8

Cov ntaub ntawv ntsig txog
Advanced SEU Detection Intel FPGA IP Tus Neeg Siv Phau Ntawv Qhia

Txhais qhov Fault Injection Areas
Koj tuaj yeem txhais cov cheeb tsam tshwj xeeb ntawm FPGA rau kev txhaj tshuaj txhaum cai uas siv Daim Ntawv Qhia Txog Tus Kheej (.smh) file. Lub SMH file khaws cov kev tswj hwm ntawm cov cuab yeej CRAM cov khoom, lawv cheeb tsam (ASD Region), thiab kev thuam. Thaum lub sij hawm tsim txheej txheem koj siv hierarchy tagging los tsim lub cheeb tsam. Tom qab ntawd, thaum muab tso ua ke, Intel Quartus Prime Assembler tsim SMH file. Qhov Kev Txhaum Txhaum Cai Debugger txwv qhov kev txhaj tshuaj yuam kev rau cov cheeb tsam tshwj xeeb uas koj txhais hauv SMH file.

Ua Hierarchy Tagging
Koj txhais cov cheeb tsam FPGA rau kev sim los ntawm kev muab lub cheeb tsam ASD rau qhov chaw. Koj tuaj yeem teev tus nqi ASD Thaj Av rau ib feem ntawm koj tus qauv tsim hierarchy siv qhov Tsim Partitions Qhov rai.

  1. Xaiv Cov Kev Ua Haujlwm ➤ Tsim Qhov rai Partitions.
  2. Txoj cai-nias nyob qhov twg hauv kab header thiab tig rau ASD Thaj Chaw los tso saib ASD Region kem (yog tias nws tsis tau tshwm sim).
  3. Sau tus nqi ntawm 0 mus rau 16 rau ib qho kev faib tawm los muab nws rau ib cheeb tsam ASD tshwj xeeb.
    • ASD cheeb tsam 0 yog tshwj tseg rau qhov tsis siv ntawm cov cuab yeej. Koj tuaj yeem muab faib rau thaj tsam no kom qhia meej tias nws tsis yog qhov tseem ceeb..
    • ASD cheeb tsam 1 yog thaj tsam qub. Txhua feem siv ntawm lub cuab yeej raug xa mus rau thaj av no tshwj tsis yog tias koj hloov pauv qhov haujlwm ntawm ASD Region.

Hais txog SMH Files

Lub SMH file muaj cov ntaub ntawv hauv qab no:

  • Yog tias koj tsis siv hierarchy tagging (piv txwv li, tus qauv tsim tsis muaj qhov tshwj xeeb ASD Cheeb Tsam cov haujlwm hauv kev tsim hierarchy), SMH file teev txhua CRAM me ntsis thiab qhia seb nws puas nkag siab rau tus tsim.
  • Yog tias koj tau ua hierarchy tagging thiab hloov default ASD Region assignments, SMH file teev txhua CRAM me ntsis thiab nws tau muab rau thaj tsam ASD.

Fault Injection Debugger tuaj yeem txwv kev txhaj tshuaj rau ib lossis ntau qhov chaw. Txhawm rau coj tus Assembler los tsim ib qho SMH file:

  • Xaiv Txoj Haujlwm ➤ Ntaus ➤ Ntaus thiab Pin Options ➤ Error Detection CRC.
  • Tig rau ntawm Tsim Daim Ntawv Qhia SEU rhiab heev file (.smh) kev xaiv.

Siv qhov Fault Injection Debugger

Nco tseg
Txhawm rau siv Fault Injection Debugger, koj txuas rau koj lub cuab yeej ntawm JTAG interface. Tom qab ntawd, teeb tsa lub cuab yeej thiab ua txhaum kev txhaj tshuaj. Txhawm rau tso qhov Fault Injection Debugger, xaiv Cov Cuab Yeej ➤ Fault Injection Debugger hauv Intel Quartus Prime software. Configuring lossis programming lub cuab yeej zoo ib yam li cov txheej txheem siv rau Programmer lossis Signal Tap Logic Analyzer.

Fault Txhaj Debugger

intel-UG-01173-Fault-Injection-FPGA-IP-Core-fig-9

Rau configure koj JTAG saw:

  1. Nyem Hardware Setup. Cov cuab yeej qhia cov programming hardware txuas nrog koj lub computer.
  2. Xaiv cov programming hardware koj xav siv.
  3. Nyem Kaw.
  4. Nyem Auto Detect, uas populates cov cuab yeej saw nrog cov programmable li pom hauv JTAG saw hlau.

Cov ntaub ntawv ntsig txog
Targeted Fault Injection Feature ntawm nplooj 21

Hardware thiab Software Requirements

Cov cuab yeej thiab software hauv qab no yuav tsum tau siv Fault Injection Debugger:

  • FEATURE kab hauv koj daim ntawv tso cai Intel FPGA uas tso cai rau Fault Injection IP core. Yog xav paub ntxiv, hu rau Intel FPGA tus neeg muag khoom hauv zos.
  • Rub tawm cable (Intel FPGA Download Cable, Intel FPGA Download Cable II, , lossis II).
  • Intel FPGA cov khoom siv txhim kho lossis cov neeg siv tsim lub rooj tsav xwm nrog JTAG kev txuas mus rau lub cuab yeej nyob rau hauv kev sim.
  • (Yeem) FEATURE kab hauv koj daim ntawv tso cai Intel FPGA uas ua rau Advanced SEU Detection IP core.

Configuring koj ntaus ntawv thiab Fault Injection Debugger

Qhov Kev Txhaum Txhaum Cai Debugger siv .sof thiab (optional) Daim Ntawv Qhia Txog Kev Xav Tau (.smh) file. Lub Software Object File (.sof) configures FPGA. Ib .smh file txhais qhov rhiab heev ntawm CRAM cov khoom hauv lub cuab yeej. Yog koj tsis muab ib qho .smh file, Fault Injection Debugger txhaj qhov yuam kev randomly thoob plaws CRAM cov khoom. Kom qhia meej a .sof:

  1. Xaiv FPGA uas koj xav tau teeb tsa hauv lub thawv khoom siv.
  2. Nyem Xaiv File.
  3. Nkag mus rau .sof thiab nyem OK. Lub Fault Txhaj Tshuaj Debugger nyeem cov .sof.
  4. (Yeem) Xaiv SMH file.
    Yog tias koj tsis qhia SMH file, Fault Injection Debugger txhaj faults random hla tag nrho cov cuab yeej. Yog tias koj qhia SMH file, koj tuaj yeem txwv kev txhaj tshuaj rau thaj chaw siv ntawm koj lub cuab yeej.
    • Txoj cai-nias lub cuab yeej hauv lub cuab yeej cuab tam lub thawv thiab tom qab ntawd nyem Xaiv SMH File.
    • Xaiv koj SMH file.
    • Nyem OK.
  5. Qhib Program/Configure.
  6. Nyem Pib.

Fault Injection Debugger teeb tsa lub cuab yeej siv lub .sof.

Cov ntawv qhia zaub mov rau xaiv SMH File

intel-UG-01173-Fault-Injection-FPGA-IP-Core-fig-10

Constraining Regions rau Fault Txhaj Tshuaj

Tom qab thauj khoom SMH file, koj tuaj yeem coj Fault Injection Debugger los ua haujlwm ntawm thaj tsam ASD nkaus xwb. Txhawm rau txheeb xyuas thaj tsam ASD uas yuav txhaj tshuaj tsis raug:

  1. Txoj cai-nias ntawm FPGA nyob rau hauv lub cuab yeej saw box, thiab nyem Qhia Device Sensitivity Map.
  2. Xaiv thaj tsam ASD rau kev txhaj tshuaj txhaum cai.

Device Sensitivity Map Viewer

intel-UG-01173-Fault-Injection-FPGA-IP-Core-fig-11

Qhia txog yam yuam kev

Koj tuaj yeem qhia ntau hom kev ua yuam kev rau kev txhaj tshuaj.

  • Ib qho yuam kev (SE)
  • Qhov yuam kev ob qhov nyob ib sab (DAE)
  • Uncorrectable multi-ntsis yuam kev (EMBE)

Intel FPGA cov cuab yeej tuaj yeem kho tus kheej ib leeg thiab ob qho tib si nyob ib puag ncig yog tias lub ntsej muag txhuam tau qhib. Intel FPGA cov khoom siv tsis tuaj yeem kho ntau qhov yuam kev. Xa mus rau tshooj ntawm kev txo qis SEUs kom paub ntau ntxiv txog kev kho qhov tsis raug. Koj tuaj yeem hais qhia qhov sib xyaw ntawm qhov tsis raug rau txhaj tshuaj thiab lub sijhawm txhaj tshuaj. Txhawm rau txheeb xyuas lub sijhawm txhaj tshuaj:

  1. Hauv Kev Txhaum Txhaum Cai Debugger, xaiv Cov Cuab Yeej ➤ Options.
  2. Luag tus maub los liab mus rau qhov sib xyaw ntawm qhov yuam kev. Xwb, koj tuaj yeem qhia qhov sib xyaw ua lej.
  3. Qhia lub sijhawm txhaj tshuaj.
  4. Nyem OK.

Daim duab 12. Qhia txog qhov sib xyaw ntawm SEU Fault Typesintel-UG-01173-Fault-Injection-FPGA-IP-Core-fig-12

Cov ntaub ntawv ntsig txog Mitigating Single Event Upset

Txhaj tshuaj yuam kev

Koj tuaj yeem txhaj qhov yuam kev hauv ntau hom:

  • Txhaj ib qho yuam kev ntawm kev hais kom ua
  • Txhaj ntau yam yuam kev ntawm kev hais kom ua
  • Txhaj qhov yuam kev kom txog thaum tau hais kom nres

Txhawm rau txhaj cov faults no:

  1. Qhib qhov Inject Fault option.
  2. Xaiv seb koj puas xav khiav kev txhaj tshuaj yuam kev rau ntau qhov kev rov ua dua lossis kom txog thaum nres:
    • Yog tias koj xaiv khiav kom txog thaum nres, Fault Injection Debugger txhaj qhov tsis raug ntawm lub sijhawm teev tseg hauv Cov Cuab Yeej ➤ Options dialog box.
    • Yog tias koj xav khiav kev txhaj tshuaj yuam kev rau ib tus lej tshwj xeeb ntawm kev rov ua dua, sau tus lej.
  3. Nyem Pib.

Nco tseg: Qhov Kev Txhaum Txhaum Cai Debugger khiav rau tus naj npawb ntawm iterations lossis kom txog thaum nres. Intel Quartus Prime Messages qhov rais qhia cov lus hais txog qhov tsis raug uas raug txhaj. Yog xav paub ntxiv txog qhov raug txhaj tshuaj, nyem Nyeem EMR. Qhov Kev Txhaum Txhaum Cai Debugger nyeem lub cuab yeej EMR thiab qhia cov ntsiab lus hauv Messages window.

Intel Quartus Prime yuam kev txhaj tshuaj thiab EMR Cov ntsiab lus lus

intel-UG-01173-Fault-Injection-FPGA-IP-Core-fig-13

Cov ntaub ntawv yuam kev
Koj tuaj yeem sau qhov chaw ntawm kev txhaj tshuaj txhaum cai los ntawm kev ceeb toom cov tsis qhia hauv Intel Quartus Prime Messages qhov rai. Yog, example, qhov kev txhaj tshuaj txhaum ua rau tus cwj pwm koj xav rov ua dua, koj tuaj yeem tsom qhov chaw txhaj tshuaj. Koj ua lub hom phiaj txhaj tshuaj siv Fault Injection Debugger hais kom ua kab interface.

Clearing Txhaj yuam kev
Txhawm rau rov ua haujlwm li qub ntawm FPGA, nyem Scrub. Thaum koj txhuam qhov yuam kev, lub cuab yeej EDCRC lub luag haujlwm yog siv los kho qhov yuam kev. Lub tshuab ntxhua khaub ncaws zoo ib yam li siv thaum lub sijhawm ua haujlwm.

Command-Line Interface
Koj tuaj yeem khiav Fault Injection Debugger ntawm kab hais kom ua nrog quartus_fid executable, uas yog qhov tseem ceeb yog tias koj xav ua txhaum kev txhaj tshuaj los ntawm tsab ntawv.

Table 5. Cov kab lus hais kom ua txhaum kev txhaj tshuaj

Cov lus luv luv Ntev sib cav Kev piav qhia
c kab Qhia qhov programming hardware lossis cable. (yuav tsum tau)
i qhov ntsuas Qhia cov cuab yeej siv los txhaj tshuaj txhaum. (yuav tsum tau)
n tus lej Qhia tus naj npawb ntawm qhov yuam kev los txhaj. Tus nqi pib yog

1. (Yeem)
t sij hawm Lub sijhawm nruab nrab ntawm kev txhaj tshuaj. (yeem)

Nco tseg: Siv quartus_fid – pab rau view tag nrho cov kev xaiv muaj. Cov cai hauv qab no muab examples siv Fault Injection Debugger commandline interface.
###################################

  • # Tshawb nrhiav seb cov cables USB twg muaj rau qhov piv txwv no
  • # Cov txiaj ntsig tau pom tias muaj ib lub cable muaj, hu ua "USB-Blaster" #
  • $ quartus_fid –list. . .
  • Cov ntaub ntawv: Hais kom ua: quartus_fid –list
    1. USB-Blaster ntawm sj-sng-z4 [USB-0] Cov Ntaub Ntawv: Intel Quartus Prime 64-Bit Fault Injection Debugger tau ua tiav. 0 yuam kev, 0 ceeb toom
  • ####################################
  • # Nrhiav cov khoom siv twg muaj nyob ntawm USB-Blaster cable
  • # Cov txiaj ntsig tau pom ob yam khoom siv: Stratix V A7, thiab MAX V CPLD. #
  • $ quartus_fid –cable USB-Blaster -a
  • Info: Hais kom ua: quartus_fid –cable=USB-Blaster -a
  • Cov ntaub ntawv (208809): Siv cov programming cable "USB-Blaster ntawm sj-sng-z4 [USB-0]"
    1. USB-Blaster ntawm sj-sng-z4 [USB-0]
  • 029030DD 5SGXEA7H(1|2|3)/5SGXEA7K1/..
  • 020A40DD 5M2210Z/EPM2210
  • Cov ntaub ntawv: Intel Quartus Prime 64-Bit Fault Injection Debugger tau ua tiav.
  • 0 yuam kev, 0 ceeb toom
  • ####################################
  • # Program Stratix V ntaus ntawv
  • # Qhov kev xaiv -index qhia cov haujlwm ua haujlwm ntawm lub cuab yeej txuas nrog.
  • # “=svgx.sof” associates a .sof file nrog lub cuab yeej
  • # "#p" txhais tau tias qhov kev pab cuam lub cuab yeej #
  • $ quartus_fid –cable USB-Blaster –index “@1=svgx.sof#p” . . .
  • Info (209016): Configuring device index 1
  • Cov ntaub ntawv (209017): Ntaus 1 muaj JTAG ID code 0x029030DD
  • Cov ntaub ntawv (209007): Kev teeb tsa ua tiav - 1 cov khoom siv tau teeb tsa
  • Cov ntaub ntawv (209011): Kev ua tiav tiav
  • Cov Ntaub Ntawv (208551): Kev kos npe rau hauv cov cuab yeej 1.
  • Cov ntaub ntawv: Intel Quartus Prime 64-Bit Fault Injection Debugger tau ua tiav.
  • 0 yuam kev, 0 ceeb toom
  • ####################################
  • # Txhaj qhov txhaum rau hauv lub cuab yeej.
  • # Tus neeg teb xov tooj #i qhia kom txhaj tshuaj tsis raug
  • # -n 3 qhia tias txhaj 3 qhov txhaum #
  • $ quartus_fid –cable USB-Blaster –index “@1=svgx.sof#i” -n 3
  • Info: Hais kom ua: quartus_fid –cable=USB-Blaster –index=@1=svgx.sof#i -n 3
  • Cov ntaub ntawv (208809): Siv cov programming cable "USB-Blaster ntawm sj-sng-z4 [USB-0]"
  • Cov ntaub ntawv (208521): Txhaj 3 qhov yuam kev rau hauv cov khoom siv
  • Cov ntaub ntawv: Intel Quartus Prime 64-Bit Fault Injection Debugger tau ua tiav.
  • 0 yuam kev, 0 ceeb toom
  • ####################################
  • # Sib tham sib hom.
  • # Siv #i kev ua haujlwm nrog -n 0 tso qhov debugger rau hauv hom kev sib tham.
  • # Nco ntsoov tias 3 qhov yuam kev raug txhaj rau hauv qhov kev sib tham dhau los;
  • # "E" nyeem qhov tsis raug tam sim no hauv EMR Unloader IP core. #
  • $ quartus_fid –cable USB-Blaster –index “@1=svgx.sof#i” -n 0
  • Info: Hais kom ua: quartus_fid –cable=USB-Blaster –index=@1=svgx.sof#i -n 0
  • Cov ntaub ntawv (208809): Siv cov programming cable "USB-Blaster ntawm sj-sng-z4 [USB-0]"
  • Nkag mus:
  • 'F' txhaj tshuaj txhaum cai
  • 'E' nyeem EMR
  • 'S' txhawm rau ua yuam kev (s)
  • 'Q' kom tawm E
  • Info (208540): Nyeem EMR array
  • Cov ntaub ntawv (208544): 3 thav duab yuam kev (s) kuaj pom hauv ntaus ntawv 1.
  • Cov ntaub ntawv (208545): yuam kev #1 : Ib qho yuam kev hauv thav duab 0x1028 ntawm ntsis 0x21EA.
  • Cov ntaub ntawv (10914): yuam kev #2 : Uncorrectable multi-ntsis yuam kev nyob rau hauv ncej 0x1116.
  • Cov ntaub ntawv (208545): Qhov yuam kev #3: Ib qho yuam kev hauv thav duab 0x1848 ntawm ntsis 0x128C.
  • 'F' txhaj tshuaj txhaum cai
  • 'E' nyeem EMR
  • 'S' txhawm rau ua yuam kev (s)
  • 'Q' kom tawm Q
  • Cov ntaub ntawv: Intel Quartus Prime 64-Bit Fault Injection Debugger tau ua tiav. 0 yuam kev, 0 ceeb toom
  • Cov ntaub ntawv: Peak virtual nco: 1522 megabytes
  • Cov ntaub ntawv: Ua tiav: Mon 3 18: 50: 00 2014
  • Cov ntaub ntawv: Sijhawm dhau los: 00:00:29
  • Cov ntaub ntawv: Tag nrho CPU lub sij hawm (ntawm tag nrho cov processors): 00:00:13

Targeted Fault Txhaj Feature

Nco tseg

Fault Injection Debugger txhaj qhov ua txhaum rau hauv FPGA randomly. Txawm li cas los xij, Targeted Fault Injection feature tso cai rau koj los txhaj qhov tsis raug rau hauv qhov chaw tsom hauv CRAM. Qhov kev ua haujlwm no yuav pab tau, piv txwv liample, yog tias koj tau sau tseg qhov kev tshwm sim SEU thiab xav sim FPGA lossis cov lus teb rau qhov xwm txheej qub tom qab hloov kho lub tswv yim rov qab. Lub Targeted Fault Injection feature tsuas yog muaj los ntawm cov kab hais kom ua interface. Koj tuaj yeem qhia meej tias qhov ua yuam kev raug txhaj los ntawm kab hais kom ua lossis hauv hom tam sim. Cov ntaub ntawv ntsig txog

TIAB SA 539: Test Methodology lossis Kev Tshawb Nrhiav Kev Ua Haujlwm thiab Rov Qab Siv CRC hauv Intel FPGA Devices

Qhia qhov ua yuam kev los ntawm kab hais kom ua

Lub Targeted Fault Injection feature tso cai rau koj los qhia meej cov npe yuam kev los ntawm kab hais kom ua, raws li qhia hauv qab no example: c:\Users\sng> quartus_fid -c 1 – i “@1= svgx.sof#i ” -n 2 -user=”@1= 0x2274 0x05EF 0x2264 0x0500″ Where: c 1 qhia tias FPGA tswj tau los ntawm thawj kab ntawm koj lub computer. i “@1= six.sof#i ” qhia tias thawj lub cuab yeej hauv cov saw tau thauj khoom nrog cov khoom file svgx.sof thiab yuav txhaj tshuaj tsis raug. n 2 qhia tias ob qhov txhaum yuav raug txhaj. user="@1= 0x2274 0x05EF 0x2264 0x0500" yog ib daim ntawv teev cov neeg siv cov kev ua txhaum cai los txhaj. Hauv no example, ntaus ntawv 1 muaj ob qhov txhaum: ntawm ncej 0x2274, ntsis 0x05EF thiab ntawm ncej 0x2264, ntsis 0x0500.

Qhia meej txog cov npe yuam kev los ntawm hom kev sim

Koj tuaj yeem ua haujlwm rau Targeted Fault Injection feature sib cuam tshuam los ntawm kev qhia tus lej ntawm qhov ua txhaum yog 0 (-n 0). Lub Fault Injection Debugger nthuav qhia cov lus txib kom sai thiab lawv cov lus piav qhia.

Prompt Mode Command Kev piav qhia
F Txhaj txhaum
E Nyeem EMR
S Scrub yuam kev
Q Tawm

Hauv hom tam sim no, koj tuaj yeem muab qhov F hais kom ua ib leeg los txhaj ib qho txhaum hauv ib qho chaw nyob hauv lub cuab yeej. Hauv qab no examples siv F hais kom ua hauv hom tam sim, peb qhov yuam kev raug txhaj. F #3 0x12 0x34 0x56 0x78 * 0x9A 0xBC +

  • Yuam kev 1 - Ib qho yuam kev me ntsis ntawm ncej 0x12, ntsis 0x34
  • Qhov yuam kev 2 - Qhov yuam kev tsis tuaj yeem ntawm tus ncej 0x56, ntsis 0x78 (ib qho * qhia txog qhov yuam kev ntau-ntsis)
  • Qhov yuam kev 3 - Qhov yuam kev ob qhov nyob ib sab ntawm ncej 0x9A, ntsis 0xBC (a + qhia tias qhov yuam kev ob npaug)

F 0x12 0x34 0x56 0x78 * Ib qho (default) yuam kev raug txhaj: yuam kev 1 - Ib qho yuam kev me ntsis ntawm ncej 0x12, ntsis 0x34. Qhov chaw tom qab thawj tus ncej/ntsis qhov chaw tsis quav ntsej. F #3 0x12 0x34 0x56 0x78 * 0x9A 0xBC + 0xDE 0x00

Peb qhov yuam kev raug txhaj tshuaj:

  • Yuam kev 1 - Ib qho yuam kev me ntsis ntawm ncej 0x12, ntsis 0x34
  • Qhov yuam kev 2 - Qhov yuam kev tsis raug ntawm tus ncej 0x56, ntsis 0x78
  • Qhov yuam kev 3 - Qhov yuam kev ob qhov nyob ib sab ntawm ncej 0x9A, ntsis 0xBC
  • Qhov chaw tom qab thawj 3 ncej/ntsis khub tsis quav ntsej

Kev txiav txim siab CRAM ntsis qhov chaw

Nco tseg: 

Thaum Fault Injection Debugger pom qhov yuam kev CRAM EDCRC, Cov Lus Ceeb Toom Kev Sau Npe (EMR) muaj cov tsos mob, tus lej lej, qhov chaw me ntsis, thiab hom kev ua yuam kev (ib zaug, ob npaug, lossis ntau-ntsis) ntawm qhov kuaj pom qhov yuam kev CRAM. Thaum lub sij hawm kev ntsuam xyuas, txuag EMR cov ntsiab lus qhia los ntawm Fault Injection Debugger thaum koj pom EDCRC txhaum. Nrog rau cov ntaub ntawv EMR uas tau sau tseg, koj tuaj yeem muab cov thav duab thiab cov lej me ntsis rau Fault Injection Debugger kom rov ua qhov yuam kev uas tau sau tseg thaum lub sijhawm kuaj xyuas, tsim qauv ntxiv, thiab ua tus qauv rov qab los teb rau qhov yuam kev ntawd.

Cov ntaub ntawv ntsig txog
AN 539: Kev Xeem Methodology lossis Kev Tshawb Nrhiav Kev Ua Haujlwm thiab rov qab siv CRC hauv Intel FPGA Devices

Advanced Command-Line Options: ASD Regions thiab yuam kev hom Qhov hnyav

Koj tuaj yeem siv qhov Fault Injection Debugger command-line interface los txhaj qhov tsis raug rau hauv cheeb tsam ASD thiab hnyav hom kev ua yuam kev. Ua ntej, koj qhia meej qhov sib xyaw ntawm hom kev ua yuam kev (ib me ntsis, ob qhov nyob ib sab, thiab ntau-ntsis kho tsis tau) siv qhov hnyav . . kev xaiv. Rau example, rau kev sib xyaw ntawm 50% ib qho yuam kev, 30% ob qhov kev ua yuam kev nyob ib sab, thiab 20% ntau qhov tsis raug, siv qhov kev xaiv - hnyav = 50.30.20. Tom qab ntawd, txhawm rau tsom rau thaj tsam ASD, siv qhov kev xaiv -smh kom suav nrog SMH file thiab qhia thaj tsam ASD rau lub hom phiaj. Rau example: $quartus_fid –cable=USB-BlasterII –index “@1=svgx.sof#pi” –weight=100.0.0 –smh=”@1=svgx.smh#2″ –number=30

Qhov no examplus command:

  • Cov kev pab cuam lub cuab yeej thiab txhaj faults (pi hlua)
  • Txhaj 100% ib leeg-ntsis txhaum (100.0.0)
  • Txhaj tsuas yog rau hauv ASD_REGION 2 (qhia los ntawm # 2)
  • Txhaj 30 faults

Txhaum Txhaum IP Core Tus Neeg Siv Phau Ntawv Qhia Archives

IP Core Version Cov neeg siv phau ntawv qhia
18.0 Kev Txhaum Txhaum Intel FPGA IP Core Tus Neeg Siv Qhia
17.1 Intel FPGA Fault Injection IP Core Tus Neeg Siv Qhia
16.1 Altera Fault Txhaj IP Core User Guide
15.1 Altera Fault Txhaj IP Core User Guide

Yog tias tus IP core version tsis tau teev tseg, cov lus qhia siv rau tus IP core version dhau los siv.

Cov ntaub ntawv kho dua tshiab rau Kev Txhaj Tshuaj Txhaum IP Core Tus Neeg Siv Qhia

Cov ntaub ntawv Version Intel Quartus Prime Version Hloov
2019.07.09 18.1 Hloov kho cov Fault Txhaj IP Pin Description lub ncauj lus kom paub meej txog Kev Pib dua, error_injected, thiab error_scrubbed signals.
2018.05.16 18.0 • Ntxiv cov ntsiab lus hauv qab no los ntawm Intel Quartus Prime Pro Edition Phau Ntawv Qhia:

—   Txhais qhov Fault Injection Areas thiab subtopics.

—   Siv qhov Fault Injection Debugger thiab subtopics.

—   Command-Line Interface thiab subtopics.

• Renamed Intel FPGA Fault Injection IP core rau Fault Injection Intel FPGA IP.
Hnub tim Version Hloov
2017.11.06 17.1 • Rebranded li Intel.

• Ntxiv Intel Cyclone 10 GX ntaus ntawv txhawb nqa.
2016.10.31 16.1 Hloov kho ntaus ntawv txhawb nqa.
2015.12.15 15.1 • Hloov Quartus II rau Quartus Prime software.

• Kho tus kheej hais txog qhov txuas.
2015.05.04 15.0 Kev tso tawm thawj zaug.

 

Cov ntaub ntawv / Cov ntaub ntawv

Intel UG-01173 Fault Injection FPGA IP Core [ua pdf] Cov neeg siv phau ntawv qhia
UG-01173 Fault Injection FPGA IP Core, UG-01173, Txhaum Txhaj Tshuaj FPGA IP Core, Txhaj C, Txhaj FPGA IP Core

Cov ntaub ntawv

Related Posts

Cia ib saib

Koj email chaw nyob yuav tsis raug luam tawm. Cov teb uas yuav tsum tau muaj yog cim *