Danfoss MCD 202 EtherNet-IP Modyuli

Ulwazi lweMveliso

Iinkcukacha
Imodyuli ye-EtherNet / IP yenzelwe ukusetyenziswa kunye ne-24 V AC / V DC kunye ne-110/240 V AC yokulawula ivolthitage. Ayifanelekanga ukusetyenziswa kunye ne-MCD 201/MCD 202 compact starters usebenzisa 380/440 V AC control vol.tage. Imodyuli ivumela i-Danfoss isiqalo esithambileyo ukuxhuma kwinethiwekhi ye-Ethernet yokulawula kunye nokubeka iliso.

Intshayelelo

Injongo yencwadana
Esi sikhokelo sofakelo sibonelela ngolwazi lofakelo lwemodyuli ye-EtherNet/IP yokukhetha i-VLT® Compact Starter MCD 201/MCD 202 kunye neVLT® Soft Starter MCD 500. Isikhokelo sofakelo senzelwe ukusetyenziswa ngabasebenzi abaqeqeshiweyo.

Abasebenzisi bacingelwa ukuba baqhelene ne:

• VLT® iziqalisi ezithambileyo.
• Itekhnoloji ye-EtherNet/IP.
• I-PC okanye i-PLC esetyenziswa njengenkosi kwinkqubo.

Funda imiyalelo phambi kofakelo kwaye uqinisekise ukuba imiyalelo yofakelo olukhuselekileyo iyaqwalaselwa.

• I-VLT® luphawu lwentengiso olubhalisiweyo.
• I-EtherNet/IP™ luphawu lwentengiso lwe-ODVA, Inc.

Izibonelelo ezongezelelweyo
Izixhobo ezifumanekayo zokuqalisa okuthambileyo kunye nezixhobo ozikhethelayo:

• I-VLT® Compact Starter MCD 200 Imiyalelo yokuSebenza inika ulwazi oluyimfuneko ukuze ufumane i-soft starter up and run.
• I-VLT® Soft Starter MCD 500 Isikhokelo sokuSebenza sibonelela ngolwazi oluyimfuneko ukuze ufumane i-soft starter up and run.

Ushicilelo olongezelelweyo kunye neemanyuwali ziyafumaneka kwaDanfoss. 'Yabona drives.danfoss.com/knowledge-center/technical-documentation/ kuluhlu.

Product Overview

Ukusetyenziswa okucetywayo
Esi sikhokelo sofakelo sihambelana ne-EtherNet / IP Module ye-VLT® eqalayo ethambileyo.
I-interface ye-EtherNet / IP yenzelwe ukunxibelelana nayo nayiphi na inkqubo ehambelana nomgangatho we-CIP EtherNet / IP. I-EtherNet / IP inikezela abasebenzisi ngezixhobo zenethwekhi zokusebenzisa iteknoloji ye-Ethernet esemgangathweni kwizicelo zokuvelisa ngelixa ivumela i-intanethi kunye noqhagamshelwano lweshishini.

Imodyuli ye-EtherNet/IP yenzelwe ukusetyenziswa:

• I-VLT® Compact Starter MCD 201/MCD 202, 24 V AC/V DC kunye ne-110/240 V AC yokulawula ivolthitage.
• I-VLT® Soft Starter MCD 500, yonke imodeli.

ISAZISO

• Imodyuli ye-EtherNet / IP AKUFANELEKILE ukuba isetyenziswe kunye ne-MCD 201/MCD 202 compact starters usebenzisa i-380/440 V AC control vol.tage.
• I-Module ye-EtherNet / IP ivumela i-Danfoss i-soft starter ukuxhuma kwinethiwekhi ye-Ethernet kwaye ilawulwe okanye ibekwe esweni usebenzisa imodeli yonxibelelwano ye-Ethernet.
• Iimodyuli ezihlukeneyo ziyafumaneka kwi-PROFINET, i-Modbus TCP, kunye ne-EtherNet / iinethiwekhi ze-IP.
• Imodyuli ye-EtherNet / IP isebenza kwinqanaba lesicelo. Amanqanaba asezantsi ayabonakala kumsebenzisi.
• Ukuqhelana neeprothokholi ze-Ethernet kunye neenethiwekhi ziyafuneka ukuze kusebenze iModyuli ye-EtherNet / IP ngempumelelo. Ukuba kukho ubunzima xa usebenzisa esi sixhobo sineemveliso zomntu wesithathu, kubandakanywa ii-PLC, iiskena, kunye nezixhobo zokugunyazisa, qhagamshelana nomboneleli ofanelekileyo.

Izamkelo kunye neziQinisekiso

Iimvume ezingakumbi kunye neziqinisekiso ziyafumaneka. Ngolwazi oluthe kratya, qhagamshelana neqabane lasekuhlaleni leDanfoss.

Ukulahlwa
Musa ukulahla izixhobo ezinezixhobo zombane kunye nenkunkuma yasekhaya.
Yiqokelele ngokwahlukeneyo ngokuhambelana nomthetho wasekhaya nosemthethweni ngoku.

Imiqondiso, izifinyezo, kunye neNdibano

Ushunqulelo	Ingcaciso
CIP™	Inkqubo eqhelekileyo yoshishino
I-DHCP	Iprothokholi yoqwalaselo lomamkeli onamandla
I-EMC	Ukuhambelana kwe-electromagnetic
IP	Iprotocol ye-Intanethi
I-LCP	Iphaneli yolawulo yendawo
I-LED	I-diode ekhupha ukukhanya
PC	Ikhompyuter yakho
PLC	Isilawuli esinocwangciso

Itheyibhile 1.1 Iimpawu kunye nezifinyezo

Iindibano
Uluhlu olunamanani lubonisa iinkqubo.
Uluhlu lweebhulethi lubonisa olunye ulwazi kunye nenkcazo yemifanekiso.

Umbhalo okekelelweyo ubonisa:

• Iireferensi ezinqamlezileyo.
• Ikhonkco.
• Igama lepharamitha.
• Igama leqela leParameter.
• Iparameter ukhetho.

Ukhuseleko

Le miqondiso ilandelayo isetyenziswa kule ncwadana:

ISILUMKISO
Ibonisa imeko enokuba yingozi enokubangela ukufa okanye ukwenzakala okukhulu.

ISILUMKO
Ibonisa imeko enokuba yingozi enokuthi ibangele ukwenzakala okuncinci okanye okuphakathi. Isenokusetyenziswa kwakhona ukulumkisa ngokuchasene nezenzo ezingakhuselekanga.

ISAZISO
Ibonisa inkcazelo ebalulekileyo, kuquka iimeko ezinokubangela umonakalo kwisixhobo okanye kwimpahla.

Abasebenzi abafanelekileyo
Uthutho oluchanekileyo noluthembekileyo, ukugcinwa, ukufakela, ukusebenza, kunye nokugcinwa kuyadingeka ukuze kusebenze ngaphandle kwenkathazo kunye nokusebenza okukhuselekileyo kwesiqalisi esithambileyo. Ngabasebenzi abaqeqeshiweyo kuphela abavumelekileyo ukuba basifakele okanye basisebenzise esi sixhobo.
Abasebenzi abafanelekileyo bachazwa njengabasebenzi abaqeqeshiweyo, abagunyaziswe ukufakela, ukugunyazisa, nokugcina izixhobo, iinkqubo, kunye neesekethe ngokungqinelana nemithetho nemimiselo efanelekileyo. Kwakhona, abasebenzi abaqeqeshiweyo kufuneka baqhelane nemiyalelo kunye namanyathelo okhuseleko achazwe kwesi sikhokelo sofakelo.

Izilumkiso ngokubanzi

ISILUMKISO

INGOZI YOKUTSHAKISWA KOMbane
I-VLT® Soft Starter MCD 500 iqulethe ivolthi eyingozitages xa uqhagamshelwe kwi-mains voltage. Ngumsebenzi wombane oqeqeshiweyo kuphela ofanele enze ufakelo lombane. Ufakelo olungafanelekanga lwemoto okanye isiqalisi esithambileyo sinokubangela ukufa, ukwenzakala okukhulu, okanye ukusilela kwesixhobo. Landela izikhokelo ezikule ncwadana kunye neekhowudi zokhuseleko zombane zasekhaya.

Iimodeli MCD5-0360C ~ MCD5-1600C:
Phatha ibha yebhasi kunye nesinki yobushushu njengamalungu aphilayo ngalo lonke ixesha iyunithi inomthamo omkhulutage iqhagamshelene (kubandakanywa xa isiqalisi esithambileyo sikhubeka okanye silindele umyalelo).

ISILUMKISO

UKUSEKA OKUFANELEKILEYO

• Khipha uqhagamshelwano lwesiqalisi esithambileyo kumthamo oyintlokotage ngaphambi kokwenza umsebenzi wokulungisa.
• Luxanduva lomntu ofakela i-soft starter ukubonelela ngokufanelekileyo umhlaba kunye nokukhusela isiphaluka sesebe ngokweekhowudi zokhuseleko zombane zendawo.
• Musa ukudibanisa i-power factor correction capacitors kwi-output ye-VLT® Soft Starter MCD 500. Ukuba ukulungiswa kwe-static power factor iqeshwe, kufuneka idibaniswe kwicala lokubonelela le-soft starter.

ISILUMKISO

UKUQALA NGOKUNGOKO
Kwimowudi ye-auto-on, i-motor inokulawulwa kude (ngeempembelelo ezikude) ngelixa i-starter ethambileyo idityaniswe kwiinqununu.

MCD5-0021B ~ MCD5-961B:
Uthutho, ukothuka koomatshini, okanye ukuphatha kakubi kunokubangela ukuba umnxibelelanisi we-bypass abambeke kwi-On state.

Ukuthintela i-motor ukuba iqalise ngokukhawuleza ekuqaliseni okanye ekusebenzeni kokuqala emva kokuthutha:

• Ngalo lonke ixesha qinisekisa ukuba unikezelo lolawulo lusetyenziswa phambi kombane.
• Ukusebenzisa unikezelo lolawulo phambi kokuba amandla aqinisekise ukuba i-contactor state iqaliswe.

ISILUMKISO

UKUQALA OKUNGACELEKANGA
Xa isiqalisi esithambileyo siqhagamshelwe kwii-AC eziphambili, unikezelo lwe-DC, okanye ukwabelana ngomthwalo, i-motor inokuqalisa nangaliphi na ixesha. Ukuqala okungalindelekanga ngexesha lenkqubo, inkonzo, okanye umsebenzi wokulungisa kunokukhokelela ekufeni, ukwenzakala kakhulu, okanye ukonakala kwempahla. I-motor ingaqala ngokutshintsha kwangaphandle, umyalelo we-fieldbus, i-input reference signal evela kwi-LCP okanye i-LOP, ngokusebenzisa i-remote operation usebenzisa i-MCT 10 Set-up Software, okanye emva kwemeko ephosakeleyo ecinyiweyo.

Ukuthintela ukuqala kwemoto engalindelekanga:

• Cinezela u-[Cima/Seta ngokutsha] kwi-LCP phambi kweeparamitha zenkqubo.
• Nqamula isiqalisi esithambileyo kwizinto eziphambili.
• Ngokupheleleyo ucingo kwaye uhlanganise isiqalisi esithambileyo, i-motor, kunye nasiphi na isixhobo esiqhutywayo phambi kokudibanisa isiqalisi esithambileyo kwii-AC eziphambili, unikezelo lwe-DC, okanye ukwabelana ngomthwalo.

ISILUMKISO

UKHUSELEKO LWABASEBENZI
I-soft starter ayisona isixhobo sokhuseleko kwaye ayiboneleli ukuhlukaniswa kombane okanye ukuqhawulwa kombane.

• Ukuba ukuhlukaniswa kuyafuneka, i-soft starter kufuneka ifakwe kunye ne-contactor engundoqo.
• Musa ukuxhomekeka ekuqaliseni nasekumiseni imisebenzi ngokhuseleko lwabasebenzi. Iimpazamo ezenzeka kubonelelo lwee-mains, uqhagamshelo lwemoto, okanye i-electronics yesiqalisi esithambileyo sinokubangela ukuqala okanye ukuma kwemoto ebingalindelekanga.
• Ukuba kukho iimpazamo kwi-electronics ye-soft starter, injini emileyo inokuqalisa. Impazamo yethutyana kunikezelo olungundoqo okanye ukulahleka koqhagamshelo lwemoto nako kunokubangela ukuba imoto emileyo iqalise.

Ukubonelela ngokhuseleko lwabasebenzi kunye nezixhobo, lawula isixhobo sokuzihlukanisa ngenkqubo yokhuseleko lwangaphandle.

ISAZISO
Phambi kokutshintsha naluphi na useto lweparameter, gcina iparameter yangoku kwi file usebenzisa iMCD PC Software okanye Gcina uMsebenzi weSeti umsebenzi.

ISAZISO
Sebenzisa i-Autostart feature ngononophelo. Funda onke amanqaku anxulumene ne-Autostart phambi kokuba usebenze.
Exampiiles kunye nemizobo kule ncwadana zibandakanyiwe kuphela ngeenjongo zokubonisa. Ulwazi oluqulethwe kule ncwadana lunokutshintshwa nangaliphi na ixesha kwaye ngaphandle kokwazisa kwangaphambili. Uxanduva okanye uxanduva aluzange lwamkelwe kumonakalo othe ngqo, ongathanga ngqo, okanye obangelwa kukusetyenziswa okanye ukusetyenziswa kwesi sixhobo.

Ukuhlohla

Inkqubo yoFakelo

ISILUMKO

UMONAKALO WEZIXHOBO
Ukuba iintloko kunye nolawulo voltage zisetyenziswa xa kufakwa okanye kususwa iinketho / izincedisi, kungonakalisa izixhobo.

Ukunqanda umonakalo:
Susa iintloko kunye nolawulo voltage ukusuka kwisiqalisi esithambileyo phambi kokuncamathisela okanye ukususa iinketho/izincedisi.

Ukufakela i-EtherNet/IP ukhetho:

1. Susa amandla olawulo kunye nonikezelo olungundoqo kwisiqalisi esithambileyo.
2. Khupha ngokupheleleyo phezulu nasezantsi iziqeshana zokugcina kwimodyuli (A).
3. Umgca wemodyuli kunye nendawo yokubeka unxibelelwano (B).
4. Tyhila phezulu nasezantsi iikliphu zokugcina ukukhusela imodyuli kwisiqalisi esithambileyo (C).
5. Connect Ethernet port 1 okanye port 2 kwimodyuli ukuya kuthungelwano.
6. Faka amandla olawulo kwisiqalisi esithambileyo.

Susa imodyuli kwisiqalisi esithambileyo:

1. Susa amandla olawulo kunye nonikezelo olungundoqo kwisiqalisi esithambileyo.
2. Nqamula zonke iintambo zangaphandle kwimodyuli.
3. Khupha ngokupheleleyo phezulu nasezantsi iziqeshana zokugcina kwimodyuli (A).
4. Tsala imodyuli kude kwisiqalisi esithambileyo.

Uqhagamshelwano

UQhagamshelwano lwe-Soft Starter
Imodyuli ye-EtherNet / IP inikwe amandla ukusuka kwisiqalo esithambileyo.

I-VLT® Compact Starter MCD 201/MCD 202
Kwimodyuli ye-EtherNet/IP yokwamkela imiyalelo yebhasi, faka ikhonkco kwii-terminals A1–N2 kwisiqalisi esithambileyo.

I-VLT® Soft Starter MCD 500
Ukuba i-MCD 500 kufuneka iqhutywe kwimodi ekude, izixhumanisi zokufaka ziyafuneka kwii-terminals 17 kunye ne-25 ukuya kwi-terminal 18. Kwimowudi yesandla, amakhonkco ayimfuneko.

ISAZISO

NGEMCD 500 KUPHELA
Ulawulo nge-fieldbus yonxibelelwano womnatha luhlala lusebenza kwimowudi yolawulo lwasekhaya kwaye lunokwenziwa okanye lukhubazwe kwimowudi yokulawula kude (iparameter 3-2 Comms kwiRemote). Jonga i-VLT® Soft Starter MCD 500 Isikhokelo sokuSebenza ngeenkcukacha zepharamitha.

UQhagamshelwano lweModyuli ye-EtherNet/IP

MCD 201/202			MCD 500
				17
	A1			18
	N2
				25
		2			2
3			3
1		A1, N2: Misa igalelo	1		(Imowudi ye-Auto-on) 17, 18: Misa igalelo25, 18: Hlela kwakhona igalelo
2		Imodyuli ye-EtherNet/IP	2		Imodyuli ye-EtherNet/IP
3		RJ45 Ethernet izibuko	3		RJ45 Ethernet izibuko

Itheyibhile 4.1 Imizobo yoQhagamshelwano

UQhagamshelwano lweNethiwekhi

Izibuko ze-Ethernet
I-EtherNet / IP Module ine-2 Ethernet port. Ukuba kuphela udibaniso olu-1 olufunekayo, naliphi na izibuko linokusetyenziswa.

Iintambo
Iintambo ezifanelekileyo zoqhagamshelwano lweModyuli ye-EtherNet/IP:

• Udidi 5
• Udidi 5e
• Udidi 6
• Udidi 6e

EMC Precautions
Ukunciphisa ukuphazamiseka kwe-electromagnetic, iintambo ze-Ethernet kufuneka zohlulwe kwiintambo zemoto kunye nee-mains nge-200 mm (7.9 in).
Intambo ye-Ethernet kufuneka iwele i-motor kunye neentambo ezinkulu kwi-angle ye-90 °.

1	Unikezelo lwesigaba se-3
2	Intambo ye-Ethernet

Umzobo 4.1 Ukusebenza okuchanekileyo kweeCables ze-Ethernet

Ukusekwa kweNethiwekhi
Umlawuli kufuneka aseke unxibelelwano ngqo nesixhobo ngasinye phambi kokuba isixhobo sithathe inxaxheba kuthungelwano.

Idilesi
Isixhobo ngasinye kuthungelwano sibhekiswa kusetyenziswa idilesi ye-MAC kunye nedilesi ye-IP kwaye sinokunikwa igama lomfuziselo elinxulumene nedilesi ye-MAC.

• Imodyuli ifumana idilesi ye-IP eguqukayo xa iqhagamshelwe kwinethiwekhi okanye inokwabelwa idilesi ye-IP engatshintshiyo ngexesha loqwalaselo.
• Igama lomfuziselo liyinketho kwaye kufuneka liqwalaselwe ngaphakathi kwesixhobo.
• Idilesi ye-MAC ilungisiwe ngaphakathi kwesixhobo kwaye iprintwe kwileyibhile engaphambili kwimodyuli.

Uqwalaselo lweSixhobo

Ukhwelile Web Iseva
Iimpawu ze-Ethernet zingaqwalaselwa ngokuthe ngqo kwi-EtherNet / IP Module usebenzisa i-on-board web umncedisi.

ISAZISO
Imposiso ye-LED idanyaza nanini na imodyuli ifumana amandla kodwa ayiqhagamshelwanga kwinethiwekhi. Imposiso ye-LED idanyaza kuyo yonke inkqubo yoqwalaselo.

ISAZISO
Idilesi engagqibekanga ye-EtherNet / IP Module entsha yi-192.168.0.2. Imaski ye-subnet engagqibekanga yi-255.255.255.0. I web umncedisi wamkela kuphela imidibaniso ngaphakathi kwendawo enye ye-subnet. Sebenzisa i-Ethernet Device Configuration Tool ukutshintsha okwethutyana idilesi yenethiwekhi yemodyuli ukuze ifane nedilesi yenethiwekhi yePC eqhuba isixhobo, ukuba kuyafuneka.

Ukuqwalasela isixhobo usebenzisa i-on-board web umncedisi:

1. Ncamathisela imodyuli kwisiqalisi esithambileyo.
2. Connect Ethernet port 1 okanye port 2 kwimodyuli ukuya kuthungelwano.
3. Faka amandla olawulo kwisiqalisi esithambileyo.
4. Qala isikhangeli kwiPC kwaye ufake idilesi yesixhobo, ilandelwa ngu/ipconfig. Idilesi engagqibekanga ye-EtherNet / IP Module entsha yi-192.168.0.2.
5. Hlela useto njengoko kufuneka.
6. Cofa Thumela ukugcina useto olutsha.
   • Ukugcina useto ngokusisigxina kwimodyuli, phawula uSeta ngokusisigxina.
7. Ukuba uyacelwa, ngenisa igama lomsebenzisi kunye negama lokugqitha.
   • Igama lomsebenzisi: Danfoss
   • Igama lokugqithisa: Danfoss

ISAZISO
Ukuba idilesi ye-IP itshintshiwe kwaye irekhodi layo lilahlekile, sebenzisa i-Ethernet Device Configuration Tool ukuskena inethiwekhi kwaye uchonge imodyuli.

ISAZISO
Ukuba utshintsha imaski yesubnet, umncedisi akakwazi ukunxibelelana nemodyuli emva kokuba useto olutsha lugciniwe.

Isixhobo soLungiselelo lweSixhobo se-Ethernet
Khuphela isiXhobo soLungiselelo lweSixhobo se-Ethernet ukusuka www.danfoss.com/drives.
Utshintsho olwenziwe nge-Ethernet Device Configuration Tool ayikwazi ukugcinwa ngokusisigxina kwi-EtherNet / IP Module. Ukuqwalasela iimpawu ngokusisigxina kwiModyuli ye-EtherNet / IP, sebenzisa ibhodi web umncedisi.

Ukuqwalasela isixhobo usebenzisa i-Ethernet Device Configuration Tool:

1. Ncamathisela imodyuli kwisiqalisi esithambileyo.
2. Xhuma i-Ethernet port 1 okanye i-port 2 kwimodyuli kwi-Ethernet port yePC.
3. Faka amandla olawulo kwisiqalisi esithambileyo.
4. Qala iSixhobo se-Ethernet yoLungiselelo lweSixhobo.
5. Cofa ukukhangela izixhobo.
   • Isoftware ikhangela izixhobo eziqhagamshelweyo.
6. Ukuseta idilesi yeIP engatshintshiyo, cofa uLungisa kwaye

Ukusebenza

IModyuli ye-EtherNet / IP yenzelwe ukusetyenziswa kwinkqubo ehambelana ne-ODVA Common Industrial Protocol. Ukuze usebenze ngempumelelo, iskena kufuneka sixhase yonke imisebenzi kunye nojongano oluchazwe kule ncwadana.

UHlelo lweSixhobo
IModyuli ye-EtherNet / IP sisixhobo seklasi ye-Adapter kwaye kufuneka ilawulwe yisixhobo seklasi yeScanner phezu kwe-Ethernet.

Uqwalaselo lweSkena

I-EDS File
Khuphela i-EDS file ukusuka drives.danfoss.com/services/pc-tools. I-EDS file iqulethe zonke iimpawu ezifunekayo ze-EtherNet/IP Module.
Kanye nge-EDS file ilayishiwe, chaza Imodyuli ye-EtherNet/IP. Iirejista zegalelo/imveliso kufuneka zibe yi-240 bytes ngobukhulu kwaye zichwetheze i-INT.

ii-LEDs

	Igama le-LED	Ubume be-LED	Inkcazo
	Amandla	Cimile	Imodyuli ayixhaswanga.
		On	Imodyuli ifumana amandla.
	Impazamo	Cimile	Imodyuli ayixhaswanga okanye ayinayo idilesi yeIP.
		Ukudanyaza	Uqhagamshelo liphelile.
		On	Phinda idilesi yeIP.
	Ubume	Cimile	Imodyuli ayixhaswanga okanye ayinayo idilesi yeIP.
		Ukudanyaza	Imodyuli ifumene idilesi ye-IP kodwa ayikaseka naluphi na uqhagamshelo lwenethiwekhi.
		On	Unxibelelwano lusekiwe.
	Ikhonkco x	Cimile	Akukho nxibelelwano lwenethiwekhi.
		On	Iqhagamshelwe kwinethiwekhi.
	TX/RX x	Ukudanyaza	Ukuthumela okanye ukufumana idatha.

Uluhlu 6.1 Ii-LED zeNgxelo

Izakhelo zePakethi

ISAZISO
Zonke iireferensi kwiirejista zibhekisa kwiirejista ezingaphakathi kwimodyuli ngaphandle kokuba kuchazwe ngenye indlela.

ISAZISO
Ezinye iziqalisi ezithambileyo aziyixhasi yonke imisebenzi.

Ukuqinisekisa uLawulo oluKhuselekileyo noluyimpumelelo
Idatha ebhaliweyo kwi-Ethernet Module ihlala kwiirejista zayo de idatha ibhalwe ngaphezulu okanye imodyuli iqaliswe kwakhona. Imodyuli ye-Ethernet ayidluliseli imiyalelo ephindwe kabini kwisiqalo esithambileyo.

Lawula imiyalelo (Bhala Kuphela)

ISAZISO
Ukuze usebenze ngokuthembekileyo, kuphela i-1 bit kwi-byte 0 inokusetwa ngexesha. Seta zonke ezinye iibhithi zibe ngu-0.

ISAZISO
Ukuba isiqalisi esithambileyo siqalwa ngonxibelelwano lwebhasi yasendle kodwa simiswe nge-LCP okanye igalelo elikude, umyalelo wokuqala ofanayo awunakusetyenziswa ukuqalisa kwakhona umqalisi othambileyo.
Ukusebenza ngokukhuselekileyo nangempumelelo kwindawo apho i-soft starter inokulawulwa kwakhona nge-LCP okanye i-remote inputs (kunye nonxibelelwano lwe-fieldbus), umyalelo wolawulo kufuneka ulandelwe ngokukhawuleza ngumbuzo wesimo ukuqinisekisa ukuba umyalelo wenziwa.

Byte	Kancinci	Umsebenzi
0	0	0 = Misa umyalelo.
		1 = Qala umyalelo.
	1	0 = Yenza uqalise okanye umise umyalelo.
		I-1 = Ukuyeka ngokukhawuleza (unxweme ukumisa) kwaye ukhubaze umyalelo wokuqala.
	2	0 = Yenza uqalise okanye umise umyalelo.
		1 = Seta kwakhona umyalelo kwaye uvale umyalelo wokuqalisa.
	3–7	Igciniwe.
1	0–1	0 = Sebenzisa igalelo elikude lesiqalo esithambileyo ukukhetha iseti yemoto.
		I-1 = Sebenzisa i-motor yokuqala xa uqala.1)
		2 = Sebenzisa imoto yesibini xa uqalisa.1)
		3 = Igciniwe.
	2–7	Igciniwe.

Itheyibhile 7.1 Izakhiwo ezisetyenziselwa ukuthumela iMiyalelo yoLawulo kwi-Soft Starter

Qinisekisa ukuba igalelo elicwangcisiweyo alimiselwanga kwiseti yeMoto khetha phambi kokusebenzisa lo msebenzi.

Imiyalelo yesimo (Funda Kuphela)

ISAZISO
Ezinye iziqalisi ezithambileyo aziyixhasi yonke imisebenzi.

Byte	Kancinci	Umsebenzi	Iinkcukacha
0	0	Uhambo	I-1 = Ikhutshiwe.
	1	Isilumkiso	1 = Isilumkiso.
	2	Ukubaleka	0 = Ayaziwa, ayilunganga, ilungele ukuqala, okanye ikhubekile.
			1 = Ukuqala, ukubaleka, ukuma, okanye ukubaleka.
	3	Igciniwe	–
	4	Ulungile	0 = Qala okanye uyeke umyalelo awumkelekanga.
			1 = Qala okanye uyeke umyalelo owamkelekileyo.
	5	Ukulawula ukusuka kumnatha	1 = Ngalo lonke ixesha, ngaphandle kwenkqubo yenkqubo.
	6	Indawo/ekude	0 = Ulawulo lwendawo.
			1 = Ulawulo olukude.
	7	Kwireferensi	1 = Ukubaleka (umqulu opheleleyotage kwimoto).
1	0–7	Ubume	0 = Akwaziwa (imenyu ivuliwe).
			I-2 = Isiqalo esithambileyo asikakulungeli (ukuqala ukulibaziseka kwakhona okanye ukulibaziseka kwe-thermal).
			3 = Ukulungele ukuqalisa (kubandakanywa nemeko yesilumkiso).
			4 = Ukuqala okanye ukubaleka.
			5 = Ukumisa okuthambileyo.
			7 = Uhambo.
			8 = Qhubela phambili.
			9 = Jog umva.
2–3	0–15	Uhambo/ikhowudi yesilumkiso	Jonga iikhowudi zohambo kwiThebhile 7.4.
41)	0–7	Imoto yangoku (ibhayithi ephantsi)	Okwangoku (A).
51)	0–7	Imoto yangoku (ibhayithi ephezulu)
6	0–7	Motor 1 lobushushu	Imodeli ye-1 ye-thermal (%).
7	0–7	Motor 2 lobushushu	Imodeli ye-2 ye-thermal (%).
8–9	0–5	Igciniwe	–
	6–8	Product parameter uluhlu version	–
	9–15	Ikhowudi yodidi lwemveliso2)	–
10	0–7	Igciniwe	–
11	0–7	Igciniwe	–
123)	0–7	Inombolo yepharamitha etshintshiweyo	0 = Akukho ziparamitha zitshintshileyo.
			1 ~ 255 = Inombolo yesalathisi sepharamitha yokugqibela itshintshile.
13	0–7	Iiparamitha	Amanani apheleleyo eeparamitha ezikhoyo kwisiqalo esithambileyo.
14–15	0–13	Ixabiso lepharamitha etshintshiweyo3)	Ixabiso leparamitha yokugqibela etshintshiweyo, njengoko kubonisiwe kwi-byte 12.
	14–15	Igciniwe	–

Byte	Kancinci	Umsebenzi	Iinkcukacha
16	0–4	Isimo sokuqala esithambileyo	0 = Igciniwe.
			1 = Ilungile.
			2 = Ukuqala.
			3 = Ukubaleka.
			4 = Ukuyeka.
			I-5 = Ayilungile (ukuqala ukulibaziseka kwakhona, qalisa kwakhona ukujonga ukushisa).
			I-6 = Ikhutshiwe.
			7 = Imo yokucwangcisa.
			8 = Qhubela phambili.
			9 = Jog umva.
	5	Isilumkiso	1 = Isilumkiso.
	6	Yaqalwa	0 = Ayisetyenziswanga.
			1 = Yasungulwa.
	7	Ulawulo lwengingqi	0 = Ulawulo lwendawo.
			1 = Ulawulo olukude.
17	0	Iiparamitha	0 = Iiparamitha zitshintshile ukususela okokugqibela ukufundwa kweparamitha.
			1 = Akukho ziparamitha zitshintshileyo.
	1	Ukulandelelana kwesigaba	0 = Ukulandelelana kwesigaba esibi.
			I-1 = Ukulandelelana kwesigaba esilungileyo.
	2–7	Ikhowudi yohambo4)	Jonga iikhowudi zohambo kwiThebhile 7.4.
18–19	0–13	Okwangoku	I-avareji ye-rms yangoku kuzo zonke izigaba ezi-3.
	14–15	Igciniwe	–
20–21	0–13	Okwangoku (% motor FLC)	–
	14–15	Igciniwe	–
22	0–7	Imodeli eshushu yoku-1 yeMoto (%)	–
23	0–7	Imodeli eshushu yoku-2 yeMoto (%)	–
24–255)	0–11	Amandla	–
	12–13	Isikali samandla	–
	14–15	Igciniwe	–
26	0–7	% amandla amandla	100% = amandla e-1.
27	0–7	Igciniwe	–
28	0–7	Igciniwe	–
29	0–7	Igciniwe	–
30–31	0–13	Inqanaba loku-1 langoku (rms)	–
	14–15	Igciniwe	–
32–33	0–13	Inqanaba loku-2 langoku (rms)	–
	14–15	Igciniwe	–
34–35	0–13	Inqanaba loku-3 langoku (rms)	–
	14–15	Igciniwe	–
36	0–7	Igciniwe	–
37	0–7	Igciniwe	–
38	0–7	Igciniwe	–
39	0–7	Igciniwe	–
40	0–7	Igciniwe	–
41	0–7	Igciniwe	–
42	0–7	Uluhlu lweParameter yohlaziyo oluncinci	–
43	0–7	Uluhlu lweParameter yohlaziyo olukhulu	–
44	0–3	Imo yengeniso yedijithali	Kuwo onke amagalelo, 0 = vula, 1 = ivaliwe.
			0 = Qala.
			1 = Yeka.
			2 = Lungisa kwakhona.
			3 = Igalelo A
	4–7	Igciniwe	–

Byte	Kancinci	Umsebenzi	Iinkcukacha
45	0–7	Igciniwe	–

Uluhlu 7.2 Izakhiwo ezisetyenziselwa ukubuza ubume beSiqalisi esithambileyo

1. Kwiimodeli ze-MCD5-0053B kunye ezincinci, eli xabiso liphindwe ka-10 kunexabiso eliboniswe kwi-LCP.
2. Ikhowudi yodidi lwemveliso: 4=MCD 200, 5=MCD 500.
3. I-byte yokufunda 14–15 (ixabiso leparameter etshintshileyo) phinda usethe i-byte 12 (inani elitshintshiweyo leparameter) kunye ne-bit 0 ye-byte 17 (iparameters zitshintshile).
   Soloko ufunda ii-bytes 12 kunye ne-17 phambi kokuba ufunde ii-bytes 14–15.
4. Amasuntswana 2–7 ebhayithi 17 anika ingxelo yohambo lomqalisi othambileyo okanye ikhowudi yesilumkiso. Ukuba ixabiso le-bits 0–4 ye-byte 16 ngu-6, umqalisi othambileyo uye wakhubeka. Ukuba bit 5=1, isilumkiso siyasebenza kwaye isiqalisi esithambileyo siyaqhubeka nokusebenza.
5. Isikali samandla sisebenza ngolu hlobo lulandelayo:
   • 0 = Phindaphinda-phinda amandla nge-10 ukufumana iW.
   • 1 = Phindaphinda-phinda amandla nge-100 ukufumana iW.
   • 2 = Amandla abonakaliswe kwi-kW.
   • 3 = Phindaphinda amandla nge-10 ukufumana i-kW.

Idilesi yoBhaliso yaNgaphakathi yokuQalisa eSoft
Iirejista zangaphakathi kwi-soft starter zinemisebenzi edweliswe kwiTheyibhuli 7.3. Ezi rejista azifikeleleki ngokuthe ngqo nge-fieldbus.

Bhalisa	Inkcazo	Amasuntswana	Iinkcukacha
0	Inguqulelo	0–5	Inombolo yoguqulelo lweprotocol yokubini.
		6–8	Product parameter uluhlu version.
		9–15	Ikhowudi yodidi lwemveliso.1)
1	Iinkcukacha zesixhobo	–	–
22)	Inombolo yepharamitha etshintshiweyo	0–7	0 = Akukho ziparamitha zitshintshileyo.
			1 ~ 255 = Inombolo yesalathisi sepharamitha yokugqibela itshintshile.
		8–15	Lilonke inani leeparamitha ezikhoyo kwisiqalisi esithambileyo.
32)	Ixabiso lepharamitha etshintshiweyo	0–13	Ixabiso leparamitha yokugqibela etshintshiweyo, njengoko kubonisiwe kwirejista yesi-2.
		14–15	Igciniwe.
4	Isimo sokuqala esithambileyo	0–4	0 = Igciniwe.
			1 = Ilungile.
			2 = Ukuqala.
			3 = Ukubaleka.
			4 = Ukuyeka.
			I-5 = Ayilungile (ukuqala ukulibaziseka kwakhona, qalisa kwakhona ukujonga ukushisa).
			I-6 = Ikhutshiwe.
			7 = Imo yokucwangcisa.
			8 = Qhubela phambili.
			9 = Jog umva.
		5	1 = Isilumkiso.
		6	0 = Isilumkiso.
			1 = Yasungulwa.
		7	0 = Ulawulo lwendawo.
			1 = Ulawulo olukude.
		8	0 = Iiparamitha zitshintshile.
			1 = Akukho ziparamitha zitshintshileyo.2)
		9	0 = Ukulandelelana kwesigaba esibi.
			I-1 = Ukulandelelana kwesigaba esilungileyo.
		10–15	Jonga iikhowudi zohambo kwi Uluhlu loku-7.4.3)
5	Okwangoku	0–13	I-avareji ye-rms yangoku kuzo zonke izigaba ezi-3.4)
		14–15	Igciniwe.
6	Okwangoku	0–9	Okwangoku (% motor FLC).
		10–15	Igciniwe.

Bhalisa	Inkcazo	Amasuntswana	Iinkcukacha
7	Ubushushu beMoto	0–7	Imodeli ye-1 ye-thermal (%).
		8–15	Imodeli ye-2 ye-thermal (%).
85)	Amandla	0–11	Amandla.
		12–13	Isikali samandla.
		14–15	Igciniwe.
9	% Umba wamandla	0–7	100% = amandla e-1.
		8–15	Igciniwe.
10	Igciniwe	0–15	–
114)	Okwangoku	0–13	Inqanaba loku-1 langoku (rms).
		14–15	Igciniwe.
124)	Okwangoku	0–13	Inqanaba loku-2 langoku (rms).
		14–15	Igciniwe.
134)	Okwangoku	0–13	Inqanaba loku-3 langoku (rms).
		14–15	Igciniwe.
14	Igciniwe	–	–
15	Igciniwe	–	–
16	Igciniwe	–	–
17	Inombolo yenguqulelo yoluhlu lweParameter	0–7	Uluhlu lweParameter yohlaziyo oluncinci.
		8–15	Uluhlu lweParameter yohlaziyo olukhulu.
18	Imo yengeniso yedijithali	0–15	Kuwo onke amagalelo, 0 = vula, 1 = ivaliwe (imfutshane).
			0 = Qala.
			1 = Yeka.
			2 = Lungisa kwakhona.
			3 = Igalelo A.
		4–15	Igciniwe.
19–31	Igciniwe	–	–

Uluhlu 7.3 Imisebenzi yeerejista zangaphakathi

1. Ikhowudi yodidi lwemveliso: 4=MCD 200, 5=MCD 500.
2. Irejista yokufunda 3 (ixabiso leparameter etshintshileyo) ibuyisela kwakhona iirejista ze-2 (inombolo yepharamitha etshintshileyo) kunye ne-4 (iiparamitha zitshintshile). Hlala ufunda irejista yesi-2 neyesi-4 phambi kokuba ufunde irejista 3.
3. Amasuntswana 10–15 erejista 4 xela uhambo lomqalisi othambileyo okanye ikhowudi yesilumkiso. Ukuba ixabiso lebits 0–4 ngu 6, isiqalisi esithambileyo sikhubekile. Ukuba bit 5=1, isilumkiso siyasebenza kwaye isiqalisi esithambileyo siyaqhubeka nokusebenza.
4. Kwiimodeli ze-MCD5-0053B kunye ezincinci, eli xabiso liphindwe ka-10 kunexabiso eliboniswe kwi-LCP.
5. Isikali samandla sisebenza ngolu hlobo lulandelayo:
   • 0 = Phindaphinda-phinda amandla nge-10 ukufumana iW.
   • 1 = Phindaphinda-phinda amandla nge-100 ukufumana iW.
   • 2 = Amandla abonakaliswe kwi-kW.
   • 3 = Phindaphinda amandla nge-10 ukufumana i-kW.

Ulawulo lweParameter (Funda/Bhala)
Amaxabiso eParameter anokufundwa okanye abhalwe kumqalisi othambileyo.
Ukuba irejista yemveliso i-57 ye-scanner inkulu kune-0, i-interface ye-EtherNet / IP ibhala zonke iirejista zeparameter kwi-soft starter.

Ngenisa amaxabiso eparameter afunekayo kwiirejista zemveliso zeskena. Ixabiso lepharamitha nganye ligcinwe kwirejista eyahlukileyo. Irejista nganye ihambelana neebyte ezi-2.

• Bhalisa i-57 (bytes 114-115) ihambelana neparameter 1-1 Motor Full Load yangoku.
• I-VLT® Soft Starter MCD 500 ineeparamitha ze-109. Bhalisa i-162 (bytes 324-325) ihambelana neparameter 16-13 Low Control Volts.

ISAZISO
Xa ubhala amaxabiso eparameter, i-EtherNet/IP Interface ihlaziya onke amaxabiso eparameter kwi-soft starter. Soloko ungenisa ixabiso elisebenzayo kwiparamitha nganye.

ISAZISO
Amanani okhetho lweparameter ngonxibelelwano lwe-fieldbus ahluka kancinci kumanani aboniswe kwiLCP. Ukubala nge-Ethernet Module iqala kwi-0, ngoko ke iparameter 2-1 Ukulandelelana kweSigaba, ukhetho luyi-1-3 kwi-LCP kodwa 0-2 ngemodyuli.

Iikhowudi zohambo

Ikhowudi	Uhlobo lohambo	MCD 201	MCD 202	MCD 500
0	Akukho luhambo	✓	✓	✓
11	Igalelo A uhambo			✓
20	Ukugcwala kweMotor		✓	✓
21	Ubushushu bobushushu bokutshona			✓
23	Ilahleko yesigaba se-L1			✓
24	Ilahleko yesigaba se-L2			✓
25	Ilahleko yesigaba se-L3			✓
26	Ukungalingani kwangoku		✓	✓
28	Ugqithiso lwangoko nangoko			✓
29	Umsinga ongaphantsi			✓
50	Ukulahlekelwa kwamandla	✓	✓	✓
54	Ukulandelelana kwesigaba		✓	✓
55	Ukuphindaphinda	✓	✓	✓
60	Ukhetho olungaxhaswanga (umsebenzi awufumaneki ngaphakathi kwedelta)			✓
61	I-FLC iphezulu kakhulu			✓
62	Ipharamitha ayikho kuluhlu			✓
70	Iintlobo ngeentlobo			✓
75	I-motor thermistor		✓	✓
101	Ixesha lokuqala eligqithisiweyo		✓	✓
102	Uqhagamshelo lweMoto			✓
104	Impazamo yangaphakathi x (apho x iyikhowudi yempazamo echazwe kuyo Uluhlu loku-7.5)			✓
113	Unxibelelwano lomqalisi (phakathi kwemodyuli kunye nesiqalisi esithambileyo)	✓	✓	✓
114	Unxibelelwano lwenethiwekhi (phakathi kwemodyuli kunye nenethiwekhi)	✓	✓	✓
115	I-L1-T1 imfutshane			✓
116	I-L2-T2 imfutshane			✓
117	I-L3-T3 imfutshane			✓
1191)	Ixesha-overcurrent (bypass overload)		✓	✓
121	Ibhetri/iwotshi			✓
122	Isekethe ye-Thermistor			✓

Itheyibhile 7.4 yeKhowudi yohambo exelwe kwii-Bytes 2–3 kunye ne-17 yeMiyalelo yeSimo

Kwi-VLT® Soft Starter MCD 500, ukukhuselwa kwexesha elidlulileyo kufumaneka kuphela kwiimodeli ezigqithisiweyo zangaphakathi.

Impazamo yangaphakathi X

Impazamo yangaphakathi	Umyalezo kwi-LCP
70–72	Imposiso yokufunda yangoku. Lx
73	QAPHELA! Susa iiVolts ezingundoqo
74–76	Uqhagamshelo lweMoto Tx
77–79	Ukudubula kusilele Px
80–82	VZC Ayiphumelelanga iPx
83	IiVolts zokulawula okuphantsi
84–98	Impazamo yangaphakathi X. Qhagamshelana nomboneleli wengingqi ngekhowudi yempazamo (X).

Uluhlu 7.5 IKhowudi yeFault yaNgaphakathi eYayanyaniswa neKhowudi yohambo 104

ISAZISO
Ifumaneka kuphela kwi-VLT® Soft Starters MCD 500. Ukufumana iinkcukacha zepharamitha, jonga i-VLT® Soft Starter MCD 500 IsiKhokelo sokuSebenza.

Uyilo lweNethiwekhi

I-Ethernet Module ixhasa inkwenkwezi, umgca, kunye ne-ring topology.

I-Star Topology
Kwinethiwekhi yeenkwenkwezi, bonke abalawuli kunye nezixhobo zidibanisa kwi-switch network central.

I-Line Topology
Kwinethiwekhi yomgca, umlawuli udibanisa ngqo kwi-1 port ye-EtherNet / IP Module yokuqala. I-2nd Ethernet port ye-EtherNet / IP Module idibanisa kwenye imodyuli, leyo idibanisa enye imodyuli kuze kube yilapho zonke izixhobo zixhunyiwe.

ISAZISO
IModyuli ye-EtherNet / IP inokutshintsha okudibeneyo ukuvumela idatha ukuba idlule kwi-topology yomgca. I-Modyuli ye-EtherNet / IP kufuneka ifumane amandla okulawula ukusuka kwisiqalo esithambileyo sokutshintsha ukusebenza.

ISAZISO
Ukuba uxhulumaniso phakathi kwezixhobo ezi-2 luphazamisekile, umlawuli akakwazi ukunxibelelana nezixhobo emva kwendawo yokuphazamiseka.

ISAZISO
Uqhagamshelo ngalunye longeza ukulibaziseka kunxibelelwano nemodyuli elandelayo. Inani eliphezulu lezixhobo kwinethiwekhi yomgca ngama-32. Ukugqithisa eli nani kunokunciphisa ukuthembeka kwenethiwekhi.

I-Ring Topology
Kwinethiwekhi ye-topology ye-ring, umlawuli udibanisa kwi-1st EtherNet / IP Module nge-network switch. I-2nd Ethernet port ye-EtherNet / IP Module idibanisa kwenye imodyuli, leyo idibanisa enye imodyuli kuze kube yilapho zonke izixhobo zixhunyiwe. Imodyuli yokugqibela idibanisa emva kokutshintsha.

ISAZISO
Ukutshintsha kwenethiwekhi kufuneka kuxhase ukulahleka kokubonwa komgca.

IiTopologies ezidibeneyo
Inethiwekhi enye inokubandakanya zombini inkwenkwezi kunye namacandelo omgca.

Iinkcukacha

• Indawo ebiyelweyo
  • Imilinganiselo, W x H x D [mm (in)] 40 x 166 x 90 (1.6 x 6.5 x 3.5)
  • Ubunzima 250 g (8.8 Oz)
  • Ukhuseleko IP20
• Ukunyuka
  • Iiklip zeplastiki zokuxhoma ze-spring-action 2
• Uqhagamshelwano
  • Umqali othambileyo we-6-way pin assembly
  • Abafowunelwa beGolide …uthuthu
  • Uthungelwano RJ45
• Iisetingi
  • Idilesi ye-IP Yabelwe ngokuzenzekelayo, iyalungiseka
  • Igama lesixhobo Yabelwe ngokuzenzekelayo, iyalungiseka
• Uthungelwano
  • Isantya sonxulumaniso 10 Mbps, 100 Mbps (auto-detect)
  • I-duplex epheleleyo
  • Auto crossover
• Amandla
  • Ukusetyenziswa (imeko ezinzileyo, ubuninzi) 35 mA kwi-24 V DC
  • Reverse polarity ekhuselweyo
  • I-galvanically yodwa
• Isiqinisekiso
  • I-RCM IEC 60947-4-2
  • CE IEC 60947-4-2
  • I-ODVA EtherNet/IP conformance ivavanyiwe

UDanfoss akanakwamkela uxanduva ngeempazamo ezinokwenzeka kwiikhathalogu, iincwadana kunye nezinye izinto eziprintiweyo. I-Danfoss inelungelo lokutshintsha iimveliso zayo ngaphandle kwesaziso. Oku kusebenza nakwiimveliso esele zicwangciswe ngokuxhomekeke ekubeni olo tshintsho lunokwenziwa ngaphandle kotshintsho olulandelelanayo oluyimfuneko kwiinkcukacha esele kuvunyelwene ngazo. Zonke iimpawu zokuthengisa kule mpahla ziyipropathi yeenkampani ezifanelekileyo. I-Danfoss kunye ne-logotype ye-Danfoss ziimpawu zorhwebo zikaDanfoss A/S. Onke Amalungelo Agciniwe.

• Danfoss A/S
• Ulsnaes 1
• DK-6300 Graasten
• vlt-drives.danfoss.com

FAQ

Q: Yintoni endimele ndiyenze ukuba ndidibana nobunzima ngokusebenzisa iModyuli ye-EtherNet / IP kunye neemveliso zomntu wesithathu?
A: Ukuba ujongana nocelomngeni xa usebenzisa isixhobo esinemveliso yomntu wesithathu ezifana nee-PLC, iiskena, okanye izixhobo zokugunyazisa, qhagamshelana nomthengisi ofanelekileyo ukuze ufumane uncedo.

Amaxwebhu / Izibonelelo

Danfoss MCD 202 EtherNet-IP Modyuli [pdf] Isikhokelo soFakelo AN361182310204en-000301, MG17M202, MCD 202 EtherNet-IP Imodyuli, MCD 202, EtherNet-IP Module, Module

Iimbekiselo

• Incwadi yokusebenzisa