Danfoss MCD 202 EtherNet-IP Module

Tlhahisoleseding ya Sehlahiswa

Litlhaloso
EtherNet/IP Module e etselitsoe ho sebelisoa le 24 V AC/V DC le 110/240 V AC control vol.tage. Ha ea lokela ho sebelisoa le MCD 201/MCD 202 compact starters sebelisa 380/440 V AC control vol.tage. Mojule o lumella Danfoss e qalang e bonolo ho hokela marang-rang a Ethernet bakeng sa taolo le tlhokomelo.

Selelekela

Sepheo sa Bukana
Tataiso ena ea ho kenya e fana ka tlhahisoleseding bakeng sa ho kenya mochine oa khetho ea EtherNet / IP bakeng sa VLT® Compact Starter MCD 201/MCD 202 le VLT® Soft Starter MCD 500. Tataiso ea ho kenya e reretsoe ho sebelisoa ke basebetsi ba tšoanelehang.

Ho nahanoa hore basebelisi ba tloaelane le:

• VLT® tse qalang tse bonolo.
• Theknoloji ea EtherNet/IP.
• PC kapa PLC e sebelisoang e le setsebi tsamaisong.

Bala litaelo pele u kenya 'me u netefatse hore litaelo tsa ho kenya ka mokhoa o sireletsehileng lia hlokomeloa.

• VLT® ke letšoao la khoebo le ngolisitsoeng.
• EtherNet/IP™ ke lets'oao la khoebo la ODVA, Inc.

Lisebelisoa tse Eketsehileng
Lisebelisoa tse fumanehang bakeng sa ho qala ka bonolo le lisebelisoa tseo u ka li khethang:

• VLT® Compact Starter MCD 200 Operating Instructions e fana ka tlhahisoleseding e hlokahalang bakeng sa ho etsa hore sebatli se bonolo se qale le ho sebetsa.
• VLT® Soft Starter MCD 500 Operating Guide e fana ka tlhahisoleseding e hlokahalang bakeng sa ho etsa hore sebatli se bonolo se qale le ho sebetsa.

Lingoliloeng le libuka tsa tlatsetso li fumaneha ho tsoa ho Danfoss. Bona drives.danfoss.com/knowledge-center/technical-documentation/ bakeng sa manane.

Sehlahisoa se Felletseview

Tšebeliso e reriloeng
Tataiso ena ea ho kenya e amana le EtherNet/IP Module bakeng sa VLT® tse qalang tse bonolo.
Sebopeho sa EtherNet / IP se etselitsoe ho buisana le tsamaiso leha e le efe e lumellanang le CIP EtherNet / IP standard. EtherNet/IP e fa basebelisi lisebelisoa tsa marang-rang ho sebelisa theknoloji e tloaelehileng ea Ethernet bakeng sa lits'ebetso tsa tlhahiso ha e ntse e nolofalletsa khokahanyo ea inthanete le ea khoebo.

EtherNet/IP Module e reretsoe ho sebelisoa le:

• VLT® Compact Starter MCD 201/MCD 202, 24 V AC/V DC le 110/240 V AC control vol.tage.
• VLT® Soft Starter MCD 500, mefuta eohle.

TSEBISO

• EtherNet/IP Module HA E lokele ho sebelisoa le MCD 201/MCD 202 compact starters e sebelisang 380/440 V AC control vol.tage.
• EtherNet / IP Module e lumella Danfoss e qalang e bonolo hore e hokahane le marang-rang a Ethernet mme e laoloe kapa e behoe leihlo ka mokhoa oa puisano oa Ethernet.
• Li-module tse arohaneng li fumaneha bakeng sa marang-rang a PROFINET, Modbus TCP, le EtherNet/IP.
• EtherNet / IP Module e sebetsa sebakeng sa kopo. Maemo a tlase a bonahala ho mosebelisi.
• Ho tloaelana le liprothokholo tsa Ethernet le marang-rang hoa hlokahala ho sebelisa EtherNet/IP Module ka katleho. Haeba ho na le mathata ha u sebelisa sesebelisoa sena ka lihlahisoa tsa batho ba bang, ho kenyeletsoa le li-PLC, li-scanner le lisebelisoa tsa ho laela, ikopanye le mofani oa thepa ea amehang.

Litumello le Litifikeiti

Litumello tse ling le litifikeiti lia fumaneha. Ho fumana lintlha tse ling, ikopanye le molekane oa lehae oa Danfoss.

Ho lahla
Se ke oa lahla thepa e nang le lisebelisoa tsa motlakase hammoho le litšila tsa lapeng.
E bokelle ka thoko ho latela melao ea lehae le ea hajoale e sebetsang.

Matshwao, Dikhutshwafatso, le Dikopano

Kgutsufatso	Tlhaloso
CIP™	Protocol e tloaelehileng ea indasteri
DHCP	Protocol ea tlhophiso ea moamoheli ea matla
EMC	Tšebelisano ea motlakase
IP	Internet protocol
LCP	Sebaka sa taolo ea sebaka
LED	Diode e ntšang khanya
PC	Khomphuta ea hau
PLC	Selaoli sa logic se hlophisitsoeng

Lethathamo la 1.1 Matshwao le Dikhutshwafatso

Likopano
Manane a nang le linomoro a bontša mekhoa.
Manane a likulo a bontša lintlha tse ling le litlhaloso tsa litšoantšo.

Mongolo o tšekaletseng o bontša:

• Tšupiso e fapaneng.
• Sehokelo.
• Lebitso la parameter.
• Lebitso la sehlopha sa parameter.
• Khetho ea parameter.

Polokeho

Matshwao a latelang a sebediswa bukeng ena:

TLHOKOMELO
E supa boemo bo ka bang kotsi bo ka bakang lefu kapa kotsi e mpe.

TLHOKOMELO
E supa boemo bo ka bang kotsi bo ka bakang kotsi e nyane kapa e itekanetseng. E ka boela ea sebelisoa ho lemosa khahlanong le mekhoa e sa sireletsehang.

TSEBISO
E bontša boitsebiso ba bohlokoa, ho akarelletsa le maemo a ka bakang tšenyo ea thepa kapa thepa.

Basebeletsi ba Tšoanelehang
Lipalangoang tse nepahetseng le tse ka tšeptjoang, polokelo, ho kenya, ts'ebetso le tlhokomelo lia hlokahala bakeng sa ts'ebetso e se nang mathata le e bolokehileng ea mochini o qalang. Ke basebetsi ba tšoanelehang feela ba lumelloang ho kenya kapa ho sebelisa thepa ena.
Basebeletsi ba tšoanelehang ba hlalosoa e le basebetsi ba koetlisitsoeng, ba filoeng matla a ho kenya, ho laela le ho hlokomela thepa, litsamaiso le lipotoloho ho latela melao le litaelo tse amehang. Hape, basebetsi ba nang le litsebo ba tlameha ho tseba litaelo le mehato ea polokeho e hlalositsoeng tataisong ena ea ho kenya.

Litemoso tse Akaretsang

TLHOKOMELO

MOTLATSI TS'OSI
VLT® Soft Starter MCD 500 e na le voltages ha e hokahane le mains voltage. Ke ramotlakase ea nang le tsebo feela ea lokelang ho kenya letsoho. Ho kenya enjene ka mokhoa o sa nepahalang kapa se qalang ho ka baka lefu, kotsi e mpe kapa ho hloleha ha lisebelisoa. Latela litataiso tse bukeng ena le likhoutu tsa polokeho ea motlakase tsa lehae.

Mefuta ea MCD5-0360C ~ MCD5-1600C:
Tšoara busbar le sink ea mocheso e le likarolo tse phelang nako le nako ha yuniti e na le matla a maholotage hokahane (ho kenyeletsoa ha sebatli se bonolo se khoptjoa kapa se emetse taelo).

TLHOKOMELO

TS'ELISO E NEPAHETSENG

• Hakolla starter e bonolo ho tsoa ho mains voltage pele o etsa mosebetsi oa ho lokisa.
• Ke boikarabelo ba motho ea kenyang starter e bonolo ho fana ka tšireletso e nepahetseng ea mobu le lekala ho latela mekhoa ea tšireletso ea motlakase ea sebakeng seo.
• Se ke oa hokela li-capacitor tsa tokiso ea matla ho tlhahiso ea VLT® Soft Starter MCD 500. Haeba tokiso ea matla a tsitsitseng e sebelisoa, e tlameha ho hokahanngoa le lehlakore la phepelo la se qalang se bonolo.

TLHOKOMELO

QHOETSO TSOHLE
Ka mokhoa oa auto-on, enjene e ka laoloa u le hole (ka lisebelisoa tse hole) ha mochini o qalang o bonojoana o hokahantsoe le li-main.

MCD5-0021B ~ MCD5-961B:
Lipalangoang, ts'isinyeho ea mochini, kapa ho ts'oaroa hampe ho ka etsa hore sehokahanyi sa bypass se hohele sebakeng sa On.

Ho thibela enjene hore e se ke ea qala hang hang ha e qala ts'ebetso kapa ts'ebetso kamora ho tsamaisoa:

• Kamehla etsa bonnete ba hore phepelo ea taolo e sebelisoa pele ho matla.
• Ho sebelisa phepelo ea taolo pele matla a etsa bonnete ba hore boemo ba contactor bo qalisoa.

TLHOKOMELO

QHOETSO E SA THABANG
Ha sebatli se bonolo se hoketsoe ho mains a AC, phepelo ea DC, kapa ho arolelana thepa, enjene e ka qala neng kapa neng. Ho qala ka mokhoa o sa lebelloang nakong ea lenaneo, tšebeletso, kapa mosebetsi oa ho lokisa ho ka fella ka lefu, kotsi e mpe kapa tšenyo ea thepa. Motlakase o ka qala ka sesebelisoa sa ka ntle, taelo ea fieldbus, pontšo ea ho kenya letsoho e tsoang ho LCP kapa LOP, ka ts'ebetso ea hole e sebelisang MCT 10 Set-up Software, kapa ka mor'a boemo bo hlakileng ba phoso.

Ho thibela ho qala ha enjene e sa lebelloang:

• Tobetsa [Off/Reset] ho LCP pele ho li-parameter tsa lenaneo.
• Hakolla se qalang se bonolo ho tsoa ho mains.
• Hokela ka terata ka ho felletseng 'me u kopanye se qalang se bonolo, enjene, le lisebelisoa life kapa life tse tsamaisoang pele u hokela sebatli se bonolo ho li-main tsa AC, phepelo ea DC, kapa ho arolelana thepa.

TLHOKOMELO

POLOKO MOSEBETSI
Starter e bonolo ha se sesebelisoa sa polokeho 'me ha e fane ka ho itšehla thajana kapa ho khaoha ho tloha phepelong.

• Haeba ho itšehla thajana ho hlokahala, ho qala ka bonolo ho tlameha ho kenngoa ka mochine o ka sehloohong.
• Se ke oa itšetleha ka mesebetsi ea ho qala le ho emisa bakeng sa polokeho ea basebetsi. Liphoso tse hlahang phepelong ea motlakase, khokahanyo ea enjene, kapa lisebelisoa tsa elektroniki tsa sebatli se bonolo li ka etsa hore enjene e qale kapa e eme e sa lebelloang.
• Haeba liphoso li etsahala ka har'a lisebelisoa tsa elektroniki tsa mochini o qalang o bonolo, mochini o emisitsoeng o ka qala. Phoso ea nakoana litsing tsa phepelo kapa tahlehelo ea khokahano ea enjine le eona e ka etsa hore koloi e emeng e qale.

Ho fana ka polokeho ea basebetsi le lisebelisoa, laola sesebelisoa sa ho itšehla thajana ka mokhoa oa kantle oa polokeho.

TSEBISO
Pele o fetola litlhophiso tsa paramethara efe kapa efe, boloka paramethara ea hajoale ho a file o sebedisa MCD PC Software kapa tshebetso ya Save User Set.

TSEBISO
Sebelisa karolo ea Autostart ka hloko. Bala lintlha tsohle tse amanang le Autostart pele o sebetsa.
ExampLits'oants'o le litšoantšo bukeng ena li kenyellelitsoe feela molemong oa ho etsa litšoantšo. Lintlha tse bukeng ena li ka fetoha neng kapa neng ntle le tsebiso pele. Boikarabello kapa boikarabello ha bo amoheloe bakeng sa tšenyo e tobileng, e sa tobang, kapa e bakiloeng ke tšebeliso kapa ts'ebeliso ea sesebelisoa sena.

Ho kenya

Mokhoa oa ho kenya

TLHOKOMELO

SEBELISA TŠENYEHO
If mains and control voltage sebelisoa ha ho kenya kapa ho tlosa likhetho / lisebelisoa, ho ka senya thepa.

Ho qoba tšenyo:
Tlosa lisebelisoa tse kholo le taolo voltage ho tloha ho setlama se bonolo pele o hokela kapa ho tlosa dikgetho/disebedisoa.

Ho kenya khetho ea EtherNet/IP:

1. Tlosa matla a taolo le phepelo ea mantlha ho tloha ho se qalang se bonolo.
2. Hula ka botlalo likarolo tse kaholimo le tse tlase tse bolokiloeng mojuleng (A).
3. Hlophisa mojule le sekotjana sa boemakepe ba puisano (B).
4. Tobetsa ka holimo le ka tlase ho likhechana tsa ho boloka ho boloka mojule ho Starter e bonolo (C).
5. Hokela Ethernet port 1 kapa port 2 mojuleng ho netweke.
6. Sebelisa matla a ho laola ho se qalang se bonolo.

Tlosa module ho tloha ho se qalang se bonolo:

1. Tlosa matla a taolo le phepelo ea mantlha ho tloha ho se qalang se bonolo.
2. Hakolla lithapo tsohle tsa kantle ho module.
3. Hula ka botlalo likarolo tse kaholimo le tse tlase tse bolokiloeng mojuleng (A).
4. Hula mojule hole le se qalang se bonolo.

Khokahano

Khokahano e Bonolo ea Starter
EtherNet / IP Module e tsamaisoa ho tloha ho se qalang se bonolo.

VLT® Compact Starter MCD 201/MCD 202
Bakeng sa EtherNet/IP Module ho amohela litaelo tsa fieldbus, kenya sehokelo ho pholletsa le li-terminals A1–N2 ho se qalang se bonolo.

VLT® Soft Starter MCD 500
Haeba MCD 500 e tlameha ho sebetsoa ka mokhoa o hole, lihokelo tsa ho kenya lia hlokahala ho pholletsa le li-terminals 17 le 25 ho ea ho terminal 18. Ka mokhoa oa letsoho, lihokelo ha li hlokehe.

TSEBISO

BAKENG SA MCD 500 FEELA
Taolo ka marang-rang a puisano ea fieldbus e lula e nolofalitsoe ka mokhoa oa taolo ea lehae mme e ka nolofalloa kapa ea holofatsoa ka mokhoa oa taolo ea hole (parameter 3-2 Comms in Remote). Sheba Tataiso ea Ts'ebetso ea VLT® Soft Starter MCD 500 bakeng sa lintlha tse qaqileng.

EtherNet / IP Module Connections

MCD 201/202			Setšoantšo sa MCD500
				17
	A1			18
	N2
				25
		2			2
3			3
1		A1, N2: Emisa ho kenya	1		(Mokhoa oa ho sebetsa) 17, 18: Emisa ho kenya25, 18: Hlophisa ho kenya hape
2		EtherNet / IP Module	2		EtherNet / IP Module
3		Likou tsa RJ45 Ethernet	3		Likou tsa RJ45 Ethernet

Lethathamo la 4.1 Lits'oants'o tsa Khokahano

Khokahano ea Marang-rang

Li-ports tsa Ethernet
EtherNet / IP Module e na le likou tse 2 tsa Ethernet. Haeba ho hlokahala khokahano e le 'ngoe feela, koung efe kapa efe e ka sebelisoa.

Lithapo
Lithapo tse loketseng bakeng sa khokahano ea EtherNet/IP Module:

• Sehlopha sa 5
• Sehlopha sa 5e
• Sehlopha sa 6
• Sehlopha sa 6e

Litlhokomelo tsa EMC
Ho fokotsa tšitiso ea motlakase, likhoele tsa Ethernet li lokela ho aroloa ho lithapo tsa enjene le tsa mains ka 200 mm (7.9 in).
Mohala oa Ethernet o tlameha ho tšela lithapo tsa motlakase le tsa mains ka lehlakoreng la 90°.

1	Phepelo ea mekhahlelo e 3
2	Cable ea Ethernet

Setšoantšo sa 4.1 Ts'ebetso e Nepahetseng ea Lithapo tsa Ethernet

Ho theha Marang-rang
Molaoli o tlameha ho theha puisano ka kotloloho le sesebelisoa ka seng pele sesebelisoa se ka kenya letsoho marang-rang.

Ho bua
Sesebelisoa se seng le se seng sa marang-rang se sebelisoa ho sebelisoa aterese ea MAC le aterese ea IP 'me se ka fuoa lebitso la tšoantšetso le amanang le aterese ea MAC.

• Mojule o fumana aterese ea IP e matla ha e hokahane le marang-rang kapa e ka fuoa aterese ea IP e tsitsitseng nakong ea tlhophiso.
• Lebitso la tšoantšetso ke la boikhethelo 'me le tlameha ho hlophisoa ka har'a sesebelisoa.
• Aterese ea MAC e tsitsitse ka har'a sesebelisoa 'me e hatisoa leiboleng e ka pele ho mojule.

Sesebediswa Configuration

Ba palameng Web Seva
Litšoaneleho tsa Ethernet li ka lokisoa ka kotloloho ho EtherNet / IP Module ho sebelisa boto web seva.

TSEBISO
Phoso ea LED e khanya neng kapa neng ha module e fumana matla empa e sa hokahane le marang-rang. Phoso ea LED e khanya nakong eohle ea ts'ebetso ea tlhophiso.

TSEBISO
Aterese ea kamehla bakeng sa EtherNet / IP Module e ncha ke 192.168.0.2. Mask ea kamehla ea subnet ke 255.255.255.0. The web seva e amohela feela likhokahano tse tsoang sebakeng se le seng sa subnet. Sebelisa Sesebelisoa sa Ethernet Device Configuration Tool ho fetola nakoana aterese ea marang-rang ea mojule ho tsamaisana le aterese ea marang-rang ea PC e sebelisang sesebelisoa, haeba ho hlokahala.

Ho lokisa sesebelisoa ho sebelisa on-board web seva:

1. Hokela module ho se qalang se bonolo.
2. Hokela Ethernet port 1 kapa port 2 mojuleng ho netweke.
3. Sebelisa matla a ho laola ho se qalang se bonolo.
4. Qala sebatli ho PC ebe u kenya aterese ea sesebelisoa, e lateloe ke /ipconfig. Aterese ea kamehla bakeng sa EtherNet / IP Module e ncha ke 192.168.0.2.
5. Fetola li-setting kamoo ho hlokahalang.
6. Tobetsa Romela ho boloka litlhophiso tse ncha.
   • Ho boloka li-setting ka ho sa feleng mojuleng, tšoaea Seta ruri.
7. Haeba u khothalletsoa, ​​​​kenya lebitso la mosebelisi le password.
   • Lebitso la mosebelisi: Danfoss
   • Password: Danfoss

TSEBISO
Haeba aterese ea IP e fetotsoe 'me rekoto ea eona e lahlehile, sebelisa Ethernet Device Configuration Tool ho hlahloba marang-rang le ho khetholla module.

TSEBISO
Haeba o fetola mask a subnet, seva ha e khone ho buisana le module ka mor'a hore litlhophiso tse ncha li bolokoe.

Sesebelisoa sa Tlhophiso ea Sesebelisoa sa Ethernet
Khoasolla sesebelisoa sa Ethernet Device Configuration Tool ho tloha www.danfoss.com/drives.
Liphetoho tse entsoeng ka Ethernet Device Configuration Tool li ke ke tsa bolokoa ka ho sa feleng ho EtherNet / IP Module. Ho lokisa litšobotsi ka ho sa feleng ho EtherNet / IP Module, sebelisa on-board web seva.

Ho lokisa sesebelisoa ho sebelisa Ethernet Device Configuration Tool:

1. Hokela module ho se qalang se bonolo.
2. Hokela Ethernet port 1 kapa port 2 module ho port ea Ethernet ea PC.
3. Sebelisa matla a ho laola ho se qalang se bonolo.
4. Qala sesebelisoa sa Ethernet Device Configuration Tool.
5. Tobetsa Search Devices.
   • Software e batla lisebelisoa tse hokahaneng.
6. Ho seta aterese ea IP e sa fetoheng, tobetsa Configure le

Tshebetso

EtherNet / IP Module e etselitsoe ho sebelisoa tsamaisong e lumellanang le ODVA Common Industrial Protocol. Bakeng sa ts'ebetso e atlehileng, scanner e tlameha ho ts'ehetsa mesebetsi eohle le likhokahano tse hlalositsoeng bukeng ena.

Sehlopha sa Lisebelisoa
EtherNet/IP Module ke sesebelisoa sa sehlopha sa Adapter mme se tlameha ho laoloa ke sesebelisoa sa sehlopha sa Scanner ho feta Ethernet.

Tlhophiso ea Scanner

EDS File
Khoasolla EDS file ho tloha drives.danfoss.com/services/pc-tools. Setšoantšo sa EDS file e na le litšobotsi tsohle tse hlokahalang tsa EtherNet/IP Module.
Ka lekhetlo le leng EDS file e laetsoe, hlalosa motho ka mong EtherNet/IP Module. Lirekoto tsa lintho tse kenang/liphetho li tlameha ho ba li-byte tse 240 ka boholo 'me li thaepe INT.

Li-LED

	Lebitso la LED	Boemo ba LED	Tlhaloso
	Matla	E tima	Mojule ha o matlafatsoe.
		On	Mojule o fumana matla.
	Phoso	E tima	Mojule ha o sebetse kapa ha o na aterese ea IP.
		Ho benya	Khokahano e felile.
		On	Aterese ea IP e habeli.
	Boemo	E tima	Mojule ha o sebetse kapa ha o na aterese ea IP.
		Ho benya	Mojule o fumane aterese ea IP empa ha o so thehe likhokahano tsa marang-rang.
		On	Puisano e thehiloe.
	Khokahano ea x	E tima	Ha ho khokahano ea marang-rang.
		On	E hokahane le marang-rang.
	TX/RX x	Ho benya	Ho fetisa kapa ho amohela data.

Lethathamo la 6.1 Li-LED tsa Maikutlo

Mehaho ea Pakete

TSEBISO
Lits'oants'o tsohle tsa lirekoto li bua ka lirejisete tse ka har'a mojulu ntle le ha ho boletsoe ka tsela e 'ngoe.

TSEBISO
Lisebelisoa tse ling tse bonolo ha li tšehetse mesebetsi eohle.

Ho netefatsa Taolo e Sireletsehileng le e Atlehileng
Lintlha tse ngotsoeng ho Ethernet Module li lula li le lirejiseteng tsa eona ho fihlela data e ngotsoe kapa mojule o tsosolosoa hape. Ethernet Module ha e fetisetse litaelo tse latellanang ho se qalang se bonolo.

Laola Litaelo (Ngola Feela)

TSEBISO
Ho sebetsa ka botshepehi, ke 1 bit in byte 0 feela e ka hlophiswang ka nako. Beha likarolo tse ling kaofela ho 0.

TSEBISO
Haeba sebatli se bonolo se qalisoa ka likhokahano tsa fieldbus empa se emisoa ka LCP kapa keno e hole, taelo e ts'oanang ea ho qala e ke ke ea sebelisoa ho qala se qalang bocha.
Ho sebetsa ka mokhoa o sireletsehileng le ka katleho sebakeng seo ho sona ho qalang ka bonolo ho ka boela ha laoloa ka LCP kapa lisebelisoa tse hōle (le li-fieldbus communications), taelo ea taolo e lokela ho lateloa hang-hang ke potso ea boemo ho netefatsa hore taelo e entsoe.

Byte	Bit	Mosebetsi
0	0	0 = Emisa taelo.
		1 = Taelo ea ho qala.
	1	0 = Numella taelo ea ho qala kapa ea ho emisa.
		1 = Ho emisa kapele (lebopong ho emisa) le ho tima taelo ea ho qala.
	2	0 = Numella taelo ea ho qala kapa ea ho emisa.
		1 = Seta taelo bocha 'me u tima taelo ea ho qala.
	3–7	Reserved.
1	0–1	0 = Sebelisa sesebelisoa sa remote starter ho khetha sete ea enjene.
		1 = Sebelisa enjene ea mantlha ha u qala.1)
		2 = Sebelisa motlakase oa bobeli ha u qala.1)
		3 = E bolokiloe.
	2–7	Reserved.

Lethathamo la 7.1 Mehaho e Sebelisitsoeng ho Romela Litaelo tsa Taolo ho Soft Starter

Netefatsa hore ho kenya lenaneo ha hoa hlophisoa ho Motor set khetha pele u sebelisa tšebetso ena.

Litaelo tsa Boemo (Bala Feela)

TSEBISO
Lisebelisoa tse ling tse bonolo ha li tšehetse mesebetsi eohle.

Byte	Bit	Mosebetsi	Lintlha
0	0	Leeto	1 = E khopiloe.
	1	Tlhokomediso	1 = Temoso.
	2	Ho matha	0 = Ha e tsejoe, e sa itokisetsa, e ikemiselitse ho qala, kapa e khoptjoa.
			1 = Ho qala, ho matha, ho ema, kapa ho matha.
	3	Reserved	–
	4	E lokile	0 = Ho qala kapa ho emisa taelo ha e amohelehe.
			1 = Qala kapa emisa taelo e amohelehang.
	5	Taolo ho tsoa ho nete	1 = Ka mehla, ntle le mokgweng wa lenaneo.
	6	Sebaka/hole	0 = Taolo ea lehae.
			1 = Taolo e hole.
	7	Ha ho buuoa	1 = Ho matha (boltage ka koloi).
1	0–7	Boemo	0 = Ha e tsejoe (menu e butsoe).
			2 = Starter e bonolo ha e so lokisoe (ho lieha ho qala bocha kapa ho lieha ha mocheso).
			3 = E loketse ho qala (ho kenyeletsoa boemo ba temoso).
			4 = Ho qala kapa ho matha.
			5 = Ho emisa ha bonolo.
			7 = Leeto.
			8 = Tsoela pele.
			9 = Jog reverse.
2–3	0–15	Leeto/khoutu ya tlhokomediso	Sheba likhoutu tsa maeto ho Lethathamo la 7.4.
41)	0–7	Motlakase oa motlakase (byte e tlase)	Hona joale (A).
51)	0–7	Motor current (high byte)
6	0–7	Mocheso oa Motor 1	Motlakase oa 1 oa mocheso oa mocheso (%).
7	0–7	Mocheso oa Motor 2	Motlakase oa 2 oa mocheso oa mocheso (%).
8–9	0–5	Reserved	–
	6–8	Mofuta oa lethathamo la lihlahisoa tsa lihlahisoa	–
	9–15	Mofuta oa sehlahisoa khoutu2)	–
10	0–7	Reserved	–
11	0–7	Reserved	–
123)	0–7	Nomoro ea parameter e fetotsoe	0 = Ha ho liparamente tse fetotsoeng.
			1 ~ 255 = Nomoro ea index ea parameter ea ho qetela e fetohile.
13	0–7	Mekhahlelo	Kakaretso ea linomoro tsa li-parameter tse fumanehang ho se qalang se bonolo.
14–15	0–13	Nomoro e fetotsoeng ea paramethara3)	Boleng ba paramethara ea ho qetela e fetotsoeng, joalo ka ha ho bonts'itsoe ho byte 12.
	14–15	Reserved	–

Byte	Bit	Mosebetsi	Lintlha
16	0–4	Boemo ba ho qala bo bonolo	0 = E bolokiloe.
			1 = E lokile.
			2 = Ho qala.
			3 = Ho matha.
			4 = Ho emisa.
			5 = Ha e itokisetse (ho qala ho lieha, qala ho hlahloba mocheso hape).
			6 = E khopiloe.
			7 = Mokhoa oa ho etsa mananeo.
			8 = Tsoela pele.
			9 = Jog reverse.
	5	Tlhokomediso	1 = Temoso.
	6	E qadile	0 = E sa tsejoe.
			1 = E qalile.
	7	Taolo ea lehae	0 = Taolo ea lehae.
			1 = Taolo e hole.
17	0	Mekhahlelo	0 = Liparamente li fetohile ho tloha ha paramethara ea ho qetela e baloa.
			1 = Ha ho liparamente tse fetotsoeng.
	1	Mokhahlelo oa tatellano	0 = Tatelano e mpe ya mokgahlelo.
			1 = Positive phase tatellano.
	2–7	Khoutu ya leeto4)	Sheba likhoutu tsa maeto ho Lethathamo la 7.4.
18–19	0–13	Hona joale	Karolelano ea li-rms tsa hona joale likarolong tsohle tse 3.
	14–15	Reserved	–
20–21	0–13	Hona joale (% motor FLC)	–
	14–15	Reserved	–
22	0–7	Moetso oa Motlakase oa 1 (%)	–
23	0–7	Moetso oa Motlakase oa 2 (%)	–
24–255)	0–11	Matla	–
	12–13	Sekala sa matla	–
	14–15	Reserved	–
26	0–7	% ntlha ea matla	100% = matla a matla a 1.
27	0–7	Reserved	–
28	0–7	Reserved	–
29	0–7	Reserved	–
30–31	0–13	Mohato oa 1 hajoale (rms)	–
	14–15	Reserved	–
32–33	0–13	Mohato oa 2 hajoale (rms)	–
	14–15	Reserved	–
34–35	0–13	Mohato oa 3 hajoale (rms)	–
	14–15	Reserved	–
36	0–7	Reserved	–
37	0–7	Reserved	–
38	0–7	Reserved	–
39	0–7	Reserved	–
40	0–7	Reserved	–
41	0–7	Reserved	–
42	0–7	Phetolelo e nyane ea lenane la parametha	–
43	0–7	Phetolelo e kholo ea paramethara	–
44	0–3	Boemo ba ho kenya dijithale	Bakeng sa lintho tsohle tse kenang, 0 = bula, 1 = e koetsoe.
			0 = Qala.
			1 = Emisa.
			2 = Khutlisa bocha.
			3 = Kenyelletso A
	4–7	Reserved	–

Byte	Bit	Mosebetsi	Lintlha
45	0–7	Reserved	–

Lethathamo la 7.2 Mehaho e Sebelisitsoeng Bakeng sa ho Botsa Maemo a Soft Starter

1. Bakeng sa mefuta ea MCD5-0053B le e menyenyane, boleng bona bo boholo ka makhetlo a 10 ho feta boleng bo bontšitsoeng ho LCP.
2. Khoutu ea mofuta oa sehlahisoa: 4=MCD 200, 5=MCD 500.
3. Ho bala li-byte 14–15 (boleng bo fetotsoeng ba paramethara) seta bocha byte 12 (nomoro e fetotsoeng ea paramente) le bit 0 ea 17 (mekhahlelo e fetohile).
   Kamehla bala li-byte 12 le 17 pele u bala li-byte 14–15.
4. Bits 2–7 of byte 17 e tlaleha leeto la motho ea qalang kapa khoutu ea temoso. Haeba boleng ba bits 0–4 ba byte 16 ke 6, starter e bonolo e khopiloe. Haeba bit 5=1, temoso e kentsoe tšebetsong 'me starter e bonolo e tsoela pele ho sebetsa.
5. Matla a matla a sebetsa ka tsela e latelang:
   • 0 = Atisa matla ka 10 ho fumana W.
   • 1 = Atisa matla ka 100 ho fumana W.
   • 2 = Matla a bontšoa ka kW.
   • 3 = Atisa matla ka 10 ho fumana kW.

Aterese ea Kahare ea Ngoliso e Bonolo ea Starter
Lirejistara tsa ka hare ka har'a sesebelisoa se bonolo li na le mesebetsi e thathamisitsoeng ho Lethathamo la 7.3. Lirekoto tsena ha li fumanehe ka kotloloho ka fieldbus.

Ngodisa	Tlhaloso	Bits	Lintlha
0	Phetolelo	0–5	Nomoro ea phetolelo ea binary protocol.
		6–8	Mofuta oa lethathamo la lihlahisoa tsa lihlahisoa.
		9–15	Khoutu ea mofuta oa sehlahisoa.1)
1	Lintlha tsa sesebelisoa	–	–
22)	Nomoro ea parameter e fetotsoe	0–7	0 = Ha ho liparamente tse fetotsoeng.
			1 ~ 255 = Nomoro ea index ea parameter ea ho qetela e fetohile.
		8–15	Kakaretso ea palo ea liparamente tse fumanehang ho se qalang se bonolo.
32)	Nomoro e fetotsoeng ea paramethara	0–13	Boleng ba paramethara ea ho qetela e fetotsoeng, joalo ka ha ho bonts'itsoe ho rejisetara 2.
		14–15	Reserved.
4	Boemo ba ho qala bo bonolo	0–4	0 = E bolokiloe.
			1 = E lokile.
			2 = Ho qala.
			3 = Ho matha.
			4 = Ho emisa.
			5 = Ha e itokisetse (ho qala ho lieha, qala ho hlahloba mocheso hape).
			6 = E khopiloe.
			7 = Mokhoa oa ho etsa mananeo.
			8 = Tsoela pele.
			9 = Jog reverse.
		5	1 = Temoso.
		6	0 = Temoso.
			1 = E qalile.
		7	0 = Taolo ea lehae.
			1 = Taolo e hole.
		8	0 = Litekanyetso li fetohile.
			1 = Ha ho liparamente tse fetotsoeng.2)
		9	0 = Tatelano e mpe ya mokgahlelo.
			1 = Positive phase tatellano.
		10–15	Sheba likhoutu tsa maeto ho Lethathamo la 7.4.3)
5	Hona joale	0–13	Karolelano ea li-rms tsa hona joale likarolong tsohle tse 3.4)
		14–15	Reserved.
6	Hona joale	0–9	Hajoale (% motor FLC).
		10–15	Reserved.

Ngodisa	Tlhaloso	Bits	Lintlha
7	Mocheso oa motlakase	0–7	Motlakase oa 1 oa mocheso oa mocheso (%).
		8–15	Motlakase oa 2 oa mocheso oa mocheso (%).
85)	Matla	0–11	Matla.
		12–13	Sekala sa matla.
		14–15	Reserved.
9	% Ntho ea matla	0–7	100% = matla a matla a 1.
		8–15	Reserved.
10	Reserved	0–15	–
114)	Hona joale	0–13	Mokhahlelo oa 1 hajoale (rms).
		14–15	Reserved.
124)	Hona joale	0–13	Mokhahlelo oa 2 hajoale (rms).
		14–15	Reserved.
134)	Hona joale	0–13	Mokhahlelo oa 3 hajoale (rms).
		14–15	Reserved.
14	Reserved	–	–
15	Reserved	–	–
16	Reserved	–	–
17	Nomoro ea mofuta oa lenane la parameter	0–7	Phetolelo e nyane ea lenane la parametha.
		8–15	Phetolelo e kholo ea paramethara.
18	Boemo ba ho kenya dijithale	0–15	Bakeng sa lintho tsohle tse kenang, 0 = bula, 1 = e koetsoe (e khutsufalitsoe).
			0 = Qala.
			1 = Emisa.
			2 = Khutlisa bocha.
			3 = Kenyelletso A.
		4–15	Reserved.
19–31	Reserved	–	–

Lethathamo la 7.3 Mesebetsi ea Lirekoto tsa ka Hare

1. Khoutu ea mofuta oa sehlahisoa: 4=MCD 200, 5=MCD 500.
2. Rejisetara ea ho bala 3 (boleng bo fetotsoeng ba paramethara) e tsosolosa lirekoto tsa 2 (nomoro e fetotsoeng ea parameter) le 4 (mekhahlelo e fetohile). Kamehla bala rejisetara 2 le 4 pele u bala rejisetara 3.
3. Bits 10–15 ea rejisetara 4 e tlaleha leeto la motho ea qalang kapa khoutu ea temoso. Haeba boleng ba bits 0–4 ke 6, se qalang se bonolo se khopiloe. Haeba bit 5=1, temoso e kentsoe tšebetsong 'me starter e bonolo e tsoela pele ho sebetsa.
4. Bakeng sa mefuta ea MCD5-0053B le e menyenyane, boleng bona bo boholo ka makhetlo a 10 ho feta boleng bo bontšitsoeng ho LCP.
5. Matla a matla a sebetsa ka tsela e latelang:
   • 0 = Atisa matla ka 10 ho fumana W.
   • 1 = Atisa matla ka 100 ho fumana W.
   • 2 = Matla a bontšoa ka kW.
   • 3 = Atisa matla ka 10 ho fumana kW.

Taolo ea Paramethara (Bala/Ngola)
Litekanyetso tsa paramethara li ka baloa ho tloha kapa tsa ngolloa ho qala ka bonolo.
Haeba tlhahiso ea tlhahiso ea 57 ea scanner e kholo ho feta 0, sebopeho sa EtherNet / IP se ngola li-register tsohle tsa parameter ho starter e bonolo.

Kenya litekanyetso tse hlokahalang tsa parameter lirejiseteng tsa tlhahiso ea sekena. Boleng ba paramethara ka 'ngoe bo bolokoa ho rejisetara e arohaneng. Ngoliso e 'ngoe le e' ngoe e lumellana le li-byte tse 2.

• Ngolisa 57 (bytes 114–115) e lumellana le parameter 1-1 Motor Full Load Current.
• VLT® Soft Starter MCD 500 e na le likarolo tse 109. Ngolisa 162 (bytes 324-325) e lumellana le parameter 16-13 Low Control Volts.

TSEBISO
Ha u ngola litekanyetso tsa parameter, EtherNet / IP Interface e ntlafatsa litekanyetso tsohle tsa parameter ho qala ka bonolo. Kamehla kenya boleng bo nepahetseng bakeng sa paramethara e 'ngoe le e 'ngoe.

TSEBISO
Nomoro ea likhetho tsa paramethara ka likhokahano tsa fieldbus e fapana hanyane le linomoro tse bontšitsoeng ho LCP. Ho bala ka Ethernet Module ho qala ho 0, kahoo bakeng sa parameter 2-1 Phase Sequence, likhetho ke 1-3 ho LCP empa 0-2 ka module.

Likhoutu tsa Leeto

Khoutu	Mofuta oa leeto	Setšoantšo sa MCD201	Setšoantšo sa MCD202	Setšoantšo sa MCD500
0	Ha ho leeto	✓	✓	✓
11	Input A leeto			✓
20	Keketseho ea makoloi		✓	✓
21	Mocheso o feteletseng oa sink			✓
23	tahlehelo ea karolo ea L1			✓
24	tahlehelo ea karolo ea L2			✓
25	tahlehelo ea karolo ea L3			✓
26	Ho se leka-lekane ha joale		✓	✓
28	Hanghang overcurrent			✓
29	Undercurrent			✓
50	Ho lahleheloa ke matla	✓	✓	✓
54	Mokhahlelo oa tatellano		✓	✓
55	Khafetsa	✓	✓	✓
60	Khetho e sa tšehetsoeng (mosebetsi ha o fumanehe ka hare ho delta)			✓
61	FLC e phahame haholo			✓
62	Paramethara ha e sebetse			✓
70	Tse fapaneng			✓
75	Thermistor ea motlakase		✓	✓
101	Nako ea ho qala e fetelletseng		✓	✓
102	Khokahano ea makoloi			✓
104	Phoso ea ka hare x (moo x e leng khoutu ea phoso e hlalositsoeng ho Lethathamo la 7.5)			✓
113	Puisano ea ho qala (pakeng tsa module le se qalang se bonolo)	✓	✓	✓
114	Puisano ea marang-rang (pakeng tsa module le marang-rang)	✓	✓	✓
115	L1-T1 e khutšoanyane			✓
116	L2-T2 e khutšoanyane			✓
117	L3-T3 e khutšoanyane			✓
1191)	Nako-overcurrent (bypass overload)		✓	✓
121	Betri/oache			✓
122	Thermistor potoloho			✓

Lethathamo la 7.4 la Khoutu ea Leeto e tlalehiloeng ho Byte 2–3 le 17 ea Melao ea Boemo

Bakeng sa VLT® Soft Starter MCD 500, tšireletso ea nako e fetang nako e fumaneha feela ho mefuta e fetang ka hare.

Phoso ea ka Hare X

Phoso e ka hare	Molaetsa ho LCP
70–72	Hajoale Bala Err. Lx
73	HLOKOMELA! Tlosa li-Volts tsa Mains
74–76	Khokahano ea makoloi Tx
77–79	Ho Sebetsa ho hloleha Px
80–82	VZC Fail Px
83	Li-Volts tse tlase tsa taolo
84–98	Phoso ea ka hare X. Ikopanye le morekisi oa lehae ka khoutu ea phoso (X).

Lethathamo la 7.5 Khoutu ea Phoso ea ka Hare e Amanang le Khoutu ea Leeto 104

TSEBISO
E fumaneha feela ho VLT® Soft Starters MCD 500. Bakeng sa lintlha tse qaqileng, sheba VLT® Soft Starter MCD 500 Operating Guide.

Moralo oa Marang-rang

Ethernet Module e tšehetsa li-topology tsa naleli, mohala le mehele.

Topology ea linaleli
Ka marang-rang a linaleli, balaoli bohle le lisebelisoa li hokahana le sesebelisoa sa marang-rang se bohareng.

Topology ea Line
Mocheng oa marang-rang, molaoli o kopanya ka ho toba ho 1 koung ea pele ea EtherNet / IP Module. Boema-kepe ba 2 ba Ethernet ba EtherNet / IP Module bo hokahanya le mojule o mong, oo hape o hokelang mojuleng o mong ho fihlela lisebelisoa tsohle li kopantsoe.

TSEBISO
EtherNet / IP Module e na le phetoho e kopanetsoeng ho lumella data hore e fete ka har'a topology ea line. EtherNet / IP Module e tlameha ho fumana matla a ho laola ho tloha ho starter e bonolo hore sesebelisoa se sebetse.

TSEBISO
Haeba kamano pakeng tsa lisebelisoa tsa 2 e sitisoa, molaoli a ke ke a buisana le lisebelisoa ka mor'a ntlha ea tšitiso.

TSEBISO
Khokahano ka 'ngoe e eketsa tieho puisanong le mojule o latelang. Palo e kholo ea lisebelisoa tsa marang-rang a marang-rang ke 32. Ho feta palo ena ho ka fokotsa ho tšepahala ha marang-rang.

Topology ea Ring
Ka marang-rang a holimo a holimo, molaoli o hokahanya le 1st EtherNet / IP Module ka sesebelisoa sa marang-rang. Boema-kepe ba 2 ba Ethernet ba EtherNet / IP Module bo hokahanya le mojule o mong, oo hape o hokelang mojuleng o mong ho fihlela lisebelisoa tsohle li kopantsoe. Mojule oa ho qetela o hokela morao ho switjha.

TSEBISO
Sesebelisoa sa marang-rang se tlameha ho tšehetsa tahlehelo ea ho lemoha mohala.

Li-Topology tse Kopantsoeng
Marang-rang a le mong a ka kenyelletsa likarolo tsa linaleli le tsa line.

Litlhaloso

• Sebaka se koaletsoeng
  • Litekanyo, W x H x D [mm (ka)] 40 x 166 x 90 (1.6 x 6.5 x 3.5)
  • Boima ba 'mele 250 g (8.8 Oz)
  • Tšireletso IP20
• Ho phahamisa
  • Lisebelisoa tsa polasetiki tse kenyang lintho tsa selemo 2
• Lihokelo
  • Kopano e bonolo ea lipini tsa litsela tse 6
  • Mabitso Khauta … molora
  • Marang-rang a RJ45
• Litlhophiso
  • Aterese ea IP E abetsoe ka bo eona, e ka lokisoa
  • Lebitso la sesebelisoa E abetsoe ka bo eona, e ka lokisoa
• Marang-rang
  • Lebelo la khokahano 10 Mbps, 100 Mbps (auto-detect)
  • Duplex e felletseng
  • Auto crossover
• Matla
  • Tšebeliso (boemo bo tsitsitseng, boholo) 35 mA ho 24 V DC
  • Reverse polarity e sirelelitsoe
  • Galvanically ka thoko
• Setifikeiti
  • RCM IEC 60947-4-2
  • CE IEC 60947-4-2
  • ODVA EtherNet/IP conformance e lekoa

Danfoss e ke ke ea amohela boikarabello bakeng sa liphoso tse ka bang teng libukeng tsa libuka, libukana le lintho tse ling tse hatisitsoeng. Danfoss e na le tokelo ea ho fetola lihlahisoa tsa eona ntle le tsebiso. Sena se sebetsa le ho lihlahisoa tse seng li ntse li le teng ka taelo ha feela liphetoho tse joalo li ka etsoa ntle le liphetoho tse nyenyane tse hlokahalang ho latela litlhaloso tse seng li lumellane. Matšoao ohle a thepa ena ke thepa ea lik'hamphani tse amehang. Danfoss le mofuta oa logo ea Danfoss ke matšoao a khoebo a Danfoss A/S. Litokelo tsohle li sirelelitsoe.

• Danfoss A / S
• Lintlha tsa 1
• DK-6300 Graasten
• vlt-drives.danfoss.com

LBH

P: Ke lokela ho etsa eng haeba ke kopana le mathata a ho sebelisa EtherNet / IP Module ka lihlahisoa tsa batho ba bang?
K: Haeba o tobana le mathata ha o sebedisa sesebediswa se nang le dihlahiswa tsa motho wa boraro tse kang di-PLC, diskena, kapa dithulusi tsa ho laela, ikopanye le mofani wa thepa ya amehang bakeng sa thuso.

Litokomane / Lisebelisoa

Danfoss MCD 202 EtherNet-IP Module [pdf] Tlhophiso Tataiso AN361182310204en-000301, MG17M202, MCD 202 EtherNet-IP Module, MCD 202, EtherNet-IP Module, Module

Litšupiso

• Bukana ea Mosebelisi