Danfoss MCD 202 EtherNet-IP Module

Product Information

Zvinotsanangurwa
EtherNet/IP Module yakagadzirirwa kushandiswa ne 24 V AC/V DC uye 110/240 V AC control vol.tage. Haina kukodzera kushandiswa neMCD 201/MCD 202 compact starters uchishandisa 380/440 V AC control vol.tage. Iyo module inobvumira Danfoss yakapfava yekutanga kuti ibatanidze kune Ethernet network yekudzora uye kutarisa.

Nhanganyaya

Chinangwa cheBhuku
Ichi chinyorwa chekuisa chinopa ruzivo rwekuiswa kweEtherNet / IP sarudzo module yeVLT® Compact Starter MCD 201 / MCD 202 uye VLT® Soft Starter MCD 500. Gwaro rekugadza rinotarisirwa kushandiswa nevashandi vanokwanisa.

Vashandisi vanofungidzirwa kuti vanoziva nezve:

• VLT® zvinyoro zvekutanga.
• EtherNet/IP tekinoroji.
• PC kana PLC iyo inoshandiswa satenzi muhurongwa.

Verenga mirairo usati waisa uye ona kuti mirairo yekumisikidza yakachengeteka inocherechedzwa.

• VLT® chiratidzo chakanyoreswa.
• EtherNet/IP™ chiratidzo chekutengeserana cheODVA, Inc.

Zvimwe Zvishandiso
Zvishandiso zviripo kune yakapfava yekutanga uye sarudzo yemidziyo:

• Iyo VLT® Compact Starter MCD 200 Operating Instructions inopa ruzivo rwakakodzera rwekuita kuti iyo yakapfava yekutanga uye ishande.
• Iyo VLT® Soft Starter MCD 500 Operating Guide inopa ruzivo rwakakodzera rwekuita kuti iyo yakapfava yekutanga uye ishande.

Mabhuku ekuwedzera uye zvinyorwa zvinowanika kubva kuDanfoss. Maona drives.danfoss.com/knowledge-center/technical-documentation/ zvezvinyorwa.

Product Overview

Chinangwa Kushandiswa
Ichi chinyorwa chekuisa chine chekuita neEtherNet/IP Module yeVLT® zvinyoro zvekutanga.
Iyo EtherNet / IP interface yakagadzirirwa kutaurirana nechero system inoenderana neCIP EtherNet / IP standard. EtherNet/IP inopa vashandisi maturusi etiweki ekuisa yakajairwa Ethernet tekinoroji yekugadzira maapplication uku ichigonesa internet uye bhizinesi kubatana.

EtherNet/IP Module yakagadzirirwa kushandiswa ne:

• VLT® Compact Starter MCD 201/MCD 202, 24 V AC/V DC uye 110/240 V AC control voltage.
• VLT® Soft Starter MCD 500, ese mamodheru.

CHIZIVISO

• Iyo EtherNet/IP Module haina kukodzera kushandiswa neMCD 201/MCD 202 compact starters uchishandisa 380/440 V AC control vol.tage.
• EtherNet/IP Module inobvumira Danfoss soft starter kuti ibatane neEthernet network uye idzorwe kana kuongororwa uchishandisa Ethernet communication model.
• Separate modules iripo yePROFINET, Modbus TCP, uye EtherNet/IP network.
• Iyo EtherNet / IP Module inoshanda pane iyo application layer. Mapazi epasi ari pachena kune mushandisi.
• Kuzivana neEthernet protocol uye network kunodiwa kuti ushande EtherNet/IP Module zvinobudirira. Kana paine zvinonetsa paunenge uchishandisa chishandiso ichi chine zvigadzirwa zvebato rechitatu, zvinosanganisira maPLC, scanner, uye maturusi ekutumira, taura nemupi akakodzera.

Zvibvumirano uye Zvitupa

Zvimwe zvibvumirano uye zvitupa zviripo. Kuti uwane rumwe ruzivo, bata mudiwa wepanzvimbo yeDanfoss.

Kurasa
Usarase midziyo ine zvinhu zvemagetsi pamwe chete netsvina yemumba.
Zviunganidze zvakaparadzana zvinoenderana nemutemo wenzvimbo uye parizvino.

Zviratidzo, Mapfupi, uye Kokorodzano

Kudimbudzira	Tsanangudzo
CIP™	Common industrial protocol
DHCP	Dynamic host configuration protocol
EMC	Electromagnetic kuenderana
IP	Internet protocol
LCP	Local control panel
LED	Chiedza-emitting diode
PC	Komputa yako pachako
PLC	Programmable logic controller

Tafura 1.1 Zviratidzo uye Mapfupi

Magungano
Mapepa ane nhamba anoratidza maitiro.
Bullet list inoratidza rumwe ruzivo uye tsananguro yemifananidzo.

Mavara akatsveyamiswa anoratidza:

• Cross-reference.
• Link.
• Parameter name.
• Parameter group zita.
• Parameter sarudzo.

Safety

Zviratidzo zvinotevera zvinoshandiswa mubhuku rino:

YAMBIRO
Inoratidza mamiriro angangoita njodzi anogona kukonzera rufu kana kukuvara kwakanyanya.

KUCHENJERA
Inoratidza mamiriro angangoita njodzi anogona kukonzera kukuvara kudiki kana pakati nepakati. Inogonawo kushandiswa kunyevera pamusoro pemaitiro asina kuchengeteka.

CHIZIVISO
Inoratidza ruzivo rwakakosha, kusanganisira mamiriro ezvinhu anogona kukonzera kukanganisa kwemidziyo kana midziyo.

Vashandi Vanokwanisa
Kutakura kwakaringana uye kwakavimbika, kuchengetedza, kuisirwa, kushanda, uye kugadzirisa kunodiwa kune iyo isina matambudziko uye yakachengeteka mashandiro eiyo nyoro yekutanga. Vashandi vanokwanisa chete ndivo vanotenderwa kuisa kana kushandisa mudziyo uyu.
Vashandi vanokwanisa vanotsanangurwa sevashandi vakadzidziswa, avo vane mvumo yekuisa, komisheni, uye kuchengetedza michina, masisitimu, uye maseketi zvinoenderana nemitemo nemirau. Zvakare, vashandi vanokwanisa vanofanirwa kujairana nemirairo uye matanho ekuchengetedza anotsanangurwa mune ino yekuisa gwaro.

General Yambiro

YAMBIRO

ELECTRICAL SHOCK HAZARD
VLT® Soft Starter MCD 500 ine ngozi voltages kana yabatanidzwa kune mains voltage. Mugadziri wemagetsi ane hunyanzvi chete ndiye anofanira kuita kuiswa kwemagetsi. Kuiswa kwakashata kwemota kana nyoro yekutangisa kunogona kukonzera kufa, kukuvara kwakanyanya, kana kutadza kwemidziyo. Tevedzera zvinongedzo zviri mubhuku rino uye macode ekuchengetedzwa kwemagetsi emunharaunda.

Mienzaniso MCD5-0360C ~ MCD5-1600C:
Bata bhara uye sink yekupisa sezvikamu mhenyu pese apo unit ine mains voltage yakabatana (kusanganisira kana iyo yakapfava inotangisa yakagumburwa kana kumirira murairo).

YAMBIRO

KUGWASHA KWAKAKODZERA

• Bvisa chinobatisa chinyoro kubva pane mains voltage asati aita basa rekugadzirisa.
• Iro ibasa remunhu anoisa iyo yakapfava inotangira kuti ipe yakakodzera pasi uye yebazi rekuchengetedza redunhu chengetedzo zvinoenderana neako magetsi ekuchengetedza makodhi.
• Usabatanidza simba rekugadzirisa capacitors kune kubuda kweVLT® Soft Starter MCD 500. Kana static power factor correction inoshandiswa, inofanira kubatanidzwa kune rutivi rwekugovera rwekutanga nyoro.

YAMBIRO

KUTANGA NEPOSIPO
Mune otomatiki modhi, mota inogona kudzorwa kure (kuburikidza neinopinza kure) nepo iyo yakapfava inotangisa yakabatana kune mains.

MCD5-0021B ~ MCD5-961B:
Kufambisa, kuvhundutsa kwemuchina, kana kubata kwakashata kunogona kukonzera iyo bypass contactor kubatika muOn state.

Kudzivirira mota kuti itange nekukurumidza pakutanga kutumwa kana kushanda mushure mekufambisa:

• Nguva dzose iva nechokwadi chokuti iyo control supply inoshandiswa pamberi pesimba.
• Kushandisa control supply pamberi pesimba kunovimbisa kuti contactor state inotangwa.

YAMBIRO

KUTANGA KUSINGAFUNGIRE
Kana iyo yakapfava yekutanga yakabatana neAC mains, DC inopa, kana kugovera mutoro, mota inogona kutanga chero nguva. Kutanga kusingatarisirwi panguva yepurogiramu, sevhisi, kana kugadzirisa basa kunogona kuguma nerufu, kukuvara kwakanyanya, kana kukuvara kwepfuma. Iyo mota inogona kutanga neyekunze switch, yefieldbus command, yekuisa referensi chiratidzo kubva kuLCP kana LOP, kuburikidza nekushanda kure uchishandisa MCT 10 Set-up Software, kana mushure memhosva yakacheneswa.

Kudzivirira mota isati yatarisirwa kutanga:

• Dzvanya [Kudzima/Reset] paLCP usati wagadzira maparamendi.
• Bvisa tambo yakapfava kubva kune mains.
• Yakazara waya uye unganidza iyo yakapfava yekutangisa, mota, uye chero mudziyo unotyairwa usati wabatanidza iyo yakapfava yekutangisa kune AC mains, DC kugovera, kana kugovera mitoro.

YAMBIRO

KUCHENGETEKA KWEVASHANDI
Iyo yakapfava yekutanga haisi chigadziro chekuchengetedza uye haipei kuparadzaniswa kwemagetsi kana kubviswa kubva pakugovera.

• Kana kuparadzaniswa kuchidiwa, iyo yakapfava inotangira inofanira kuiswa ine main contactor.
• Usavimbe nekutanga uye kumisa mabasa kuitira kuchengetedza kwevashandi. Mhosho dzinoitika mukupihwa mains, iyo mota yekubatanidza, kana zvemagetsi zveiyo yakapfava inotangisa inogona kukonzera isingatarisirwe mota kutanga kana kumira.
• Kana kukanganisa kukaitika mumagetsi eiyo soft starter, mota yakamira inogona kutanga. Kukanganisa kwenguva pfupi mumagetsi ekupa kana kurasikirwa kwekubatanidza mota kunogona kukonzera kuti mota yakamira itange.

Kupa kuchengetedzwa kwevashandi nemidziyo, dzora mudziyo wekuzviparadzanisa nevamwe kuburikidza neyekunze kuchengetedza system.

CHIZIVISO
Usati wachinja chero zvigadziriso zveparameter, chengetedza ikozvino parameter kune a file uchishandisa MCD PC Software kana Save User Set basa.

CHIZIVISO
Shandisa Autostart chimiro nekuchenjerera. Verenga zvese zvinyorwa zvine chekuita neAutostart usati washanda.
The exampmadhayagiramu ari mubhuku rino anosanganisirwa nechinangwa chekuratidzira chete. Ruzivo rwuri mubhuku rino runogona kushandurwa chero nguva uye pasina chiziviso chekutanga. Basa kana mhosva haitombogamuchirwi kune yakananga, isina kunanga, kana mhedzisiro kukuvara kunobva mukushandiswa kana kushandiswa kwemudziyo uyu.

Installation

Installation Procedure

KUCHENJERA

ZVINHU ZVAKAWANDA
Kana mains and control voltage inoiswa kana uchiisa kana kubvisa sarudzo / zvishandiso, zvinogona kukuvadza midziyo.

Kudzivirira kukanganisa:
Bvisa mains uye control voltage kubva kune yakapfava yekutanga isati yabatanidza kana kubvisa sarudzo / zvishandiso.

Kuisa iyo EtherNet/IP sarudzo:

1. Bvisa simba rekutonga uye mains kupa kubva kune yakapfava yekutanga.
2. Dhonza zvizere kumusoro uye pasi ekuchengeta zvimedu pane module (A).
3. Rongedza iyo module neyekutaurirana port slot (B).
4. Sunda kumusoro uye pasi chengetedza zvimedu kuchengetedza module kune yakapfava yekutanga (C).
5. Batanidza Ethernet port 1 kana port 2 pane module kune network.
6. Isa simba rekudzora kune nyoro yekutanga.

Bvisa module kubva kune yakapfava yekutanga:

1. Bvisa simba rekutonga uye mains kupa kubva kune yakapfava yekutanga.
2. Bvisa wiring dzese dzekunze kubva pamodule.
3. Dhonza zvizere kumusoro uye pasi ekuchengeta zvimedu pane module (A).
4. Dhonza iyo module kubva kune yakapfava yekutanga.

Connection

Soft Starter Connection
Iyo EtherNet / IP Module inopihwa simba kubva kune yakapfava yekutanga.

VLT® Compact Starter MCD 201/MCD 202
Kuti EtherNet/IP Module igamuchire mirairo yebhazi remumunda, kodzera chinongedzo pazviteshi A1–N2 pane inotangira yakapfava.

VLT® Yakapfava Starter MCD 500
Kana iyo MCD 500 ichifanira kushandiswa munzvimbo iri kure, zvinongedzo zvekupinza zvinodiwa pamatunhu 17 uye 25 kune terminal 18. Mumaoko-on mode, zvinongedzo hazvidiwi.

CHIZIVISO

YEMCD 500 CHETE
Kudzora kuburikidza neiyo fieldbus yekutaurirana network inogara ichigoneswa munharaunda yekudzora modhi uye inogona kugoneswa kana kuremerwa muremote control mode (parameter 3-2 Comms in Remote). Ona VLT® Soft Starter MCD 500 Operating Guide kuti uwane ruzivo.

EtherNet/IP Module Connections

MCD 201/202			MCD500
				17
	A1			18
	N2
				25
		2			2
3			3
1		A1, N2: Mira kuisa	1		(Auto-on mode) 17, 18: Stop input25, 18: Reset input
2		EtherNet/IP Module	2		EtherNet/IP Module
3		RJ45 Ethernet zviteshi	3		RJ45 Ethernet zviteshi

Tafura 4.1 Madhiyamu ekubatanidza

Network Connection

Ethernet Ports
Iyo EtherNet/IP Module ine 2 Ethernet ports. Kana chete 1 yekubatanidza ichidikanwa, chero chiteshi chinogona kushandiswa.

Cables
Yakakodzera tambo dzeEtherNet/IP Module yekubatanidza:

• Chikamu 5
• Chikamu 5e
• Chikamu 6
• Chikamu 6e

EMC Precautions
Kuti uderedze kukanganiswa kwemagetsi, tambo dzeEthernet dzinofanirwa kupatsanurwa kubva kumota uye mains tambo ne200 mm (7.9 mukati).
Iyo Ethernet tambo inofanira kuyambuka mota uye mains tambo pakona ye90 °.

1	3-chikamu chekupa
2	Ethernet tambo

Mufananidzo 4.1 Kwazvo Kumhanya kweEthernet Cables

Network Establishment
Iye controller anofanira kumisa kutaurirana zvakananga nemudziyo wega wega mudziyo usati watora chikamu munetiweki.

Addressing
Chishandiso chega chega chiri munetiweki chinogadziriswa uchishandisa kero yeMAC uye kero yeIP uye inogona kupihwa zita rekufananidzira rine hukama nekero yeMAC.

• Iyo module inogamuchira ine simba IP kero kana yakabatana kune network kana inogona kupihwa static IP kero panguva yekumisikidzwa.
• Zita rechiratidzo nderokusarudza uye rinofanirwa kugadzirwa mukati memudziyo.
• Iyo MAC kero inogadziriswa mukati memudziyo uye inodhindwa pane label kumberi kwemodule.

Device Configuration

Pa-bhodhi Web Server
Ethernet hunhu hunogona kugadziridzwa zvakananga muEtherNet / IP Module uchishandisa iyo pabhodhi web server.

CHIZIVISO
Iyo Kanganiso LED inopenya pese iyo module inogamuchira simba asi isina kubatana kunetiweki. Iyo Kanganiso LED inopenya mukati mekugadzirisa maitiro.

CHIZIVISO
Iyo kero yakasarudzika yeEtherNet / IP Module itsva ndeye 192.168.0.2. The default subnet mask is 255.255.255.0. The web server inongogamuchira zvinongedzo kubva mukati meiyo subnet domain. Shandisa Ethernet Device Configuration Tool kuchinja kero yenetiweki yemodule kuti ienderane nekero yenetiweki yePC inoshandisa chishandiso, kana zvichidikanwa.

Kugadzirisa mudziyo uchishandisa pane-bhodhi web server:

1. Batanidza module kune yakapfava yekutanga.
2. Batanidza Ethernet port 1 kana port 2 pane module kune network.
3. Isa simba rekudzora kune nyoro yekutanga.
4. Tanga browser paPC uye isa kero yemudziyo, inoteverwa ne/ipconfig. Iyo kero yakasarudzika yeEtherNet / IP Module itsva ndeye 192.168.0.2.
5. Rongedza marongero sezvinodiwa.
6. Dzvanya Tumira kuti uchengetedze marongero matsva.
   • Kuti uchengetedze zvigadziriso zvachose mumodule, tike Seta zvachose.
7. Kana ukakumbirwa, isa zita rekushandisa uye password.
   • Username: Danfoss
   • Password: Danfoss

CHIZIVISO
Kana IP kero ikachinjwa uye rekodhi rayo rikarasika, shandisa Ethernet Device Configuration Tool kutarisa network uye kuona module.

CHIZIVISO
Kana ichichinja subnet mask, sevha haikwanise kutaurirana nemodule mushure mekunge marongero matsva achengetwa.

Ethernet Device Configuration Tool
Dhawunirodha Ethernet Device Configuration Tool kubva www.danfoss.com/drives.
Kuchinja kwakaitwa kuburikidza neEthernet Device Configuration Tool haigoni kuchengetwa zvachose muEtherNet / IP Module. Kuti ugadzirise maitiro zvachose muEtherNet / IP Module, shandisa pa-bhodhi web server.

Kugadzirisa mudziyo uchishandisa Ethernet Device Configuration Tool:

1. Batanidza module kune yakapfava yekutanga.
2. Batanidza Ethernet port 1 kana port 2 pane module kune Ethernet port yePC.
3. Isa simba rekudzora kune nyoro yekutanga.
4. Tanga iyo Ethernet Device Configuration Tool.
5. Click Search Devices.
   • Iyo software inotsvaga zvishandiso zvakabatana.
6. Kuti uise static IP kero, tinya Configure uye

Operation

EtherNet/IP Module yakagadzirirwa kushandiswa muhurongwa hunoenderana neODVA Common Industrial Protocol. Kuti ushande unobudirira, scanner inofanirawo kutsigira mabasa ese uye mainterface anotsanangurwa mubhuku rino.

Dhidhiyo Classification
EtherNet/IP Module iAdapter class device uye inofanira kutungamirirwa neScanner class device pamusoro peEthernet.

Scanner Configuration

EDS File
Dhaunirodha EDS file kubva drives.danfoss.com/services/pc-tools. Iye EDS file ine ese anodiwa hunhu hweEtherNet/IP Module.
Kamwe EDS file inotakurwa, tsanangura munhu EtherNet/IP Module. Marejista ekupinda/zvinobuda anofanira kunge ari 240 bytes muhukuru uye nyora INT.

LEDs

	LED zita	Chimiro che LED	Tsanangudzo
	Simba	Off	Iyo module haina simba.
		On	Iyo module inogamuchira simba.
	Error	Off	Iyo module haina simba kana haina IP kero.
		Kupenya	Nguva yekubatanidza yapera.
		On	Duplicate IP kero.
	Status	Off	Iyo module haina simba kana haina IP kero.
		Kupenya	Iyo module yakawana IP kero asi haina kumisa chero network yekubatanidza.
		On	Kukurukurirana kwakatangwa.
	Link x	Off	Hapana network network.
		On	Yakabatanidzwa kune network.
	TX/RX x	Kupenya	Kutumira kana kugamuchira data.

Tafura 6.1 Feedback LEDs

Packet Structures

CHIZIVISO
Ese mareferensi kumarejista anoreva marejista ari mukati memodule kunze kwekunge zvataurwa neimwe nzira.

CHIZIVISO
Mamwe manyoro ekutanga haatsigire mabasa ese.

Kuve nechokwadi Chekuchengetedza uye Kubudirira Kudzora
Dhata yakanyorwa kuEthernet Module inoramba iri mumarejista ayo kusvika iyo data yanyorwa kana kuti module yatangazve. Iyo Ethernet Module haifambisi inotevedzana duplicate mirairo kune yakapfava yekutanga.

Kudzora Mirairo (Nyora Chete)

CHIZIVISO
Kuti ushande zvakavimbika, 1 bit chete mu byte 0 inogona kusetwa panguva. Isa mamwe ese mabheti ku0.

CHIZIVISO
Kana iyo yakapfava yekutangisa yatangwa kuburikidza nefieldbus kutaurirana asi yakamira kuburikidza neLCP kana yekuisa kure, yakafanana yekutanga kuraira haigone kushandiswa kutangazve yakapfava.
Kuti ushande zvakachengeteka uye zvinobudirira munzvimbo iyo iyo yakapfava inotangisa inogona zvakare kudzorwa kuburikidza neLCP kana iyo iri kure yekuisa (uye fieldbus communications), murairo wekutonga unofanirwa kuteverwa nekukurumidza nemubvunzo wemamiriro kuti usimbise kuti murairo waitwa.

Byte	Bit	Function
0	0	0 = Mira kuraira.
		1 = Kutanga kuraira.
	1	0 = Gonesa kutanga kana kumisa kuraira.
		1 = Kurumidza kumira (mahombekombe kumira) uye dzima kutanga kuraira.
	2	0 = Gonesa kutanga kana kumisa kuraira.
		1 = Gadzirisa zvakare kuraira uye dzima kutanga kuraira.
	3–7	Reserved.
1	0–1	0 = Shandisa yakapfava yekutanga yekuisa kure kuti usarudze mota set.
		1 = Shandisa mota yekutanga paunotanga.1)
		2 = Shandisa mota yechipiri paunotanga.1)
		3 = Yakachengetwa.
	2–7	Reserved.

Tafura 7.1 Zvimiro Zvinoshandiswa Kutumira Kudzora Mirairo kune Yakapfava Starter

Ita shuwa kuti iyo programmable yekupinda haina kusetwa kuMotor set sarudza usati washandisa basa iri.

Status Commands (Yekuverenga Chete)

CHIZIVISO
Mamwe manyoro ekutanga haatsigire mabasa ese.

Byte	Bit	Function	Details
0	0	Rwendo	1 = Kubviswa.
	1	Yambiro	1 = Yambiro.
	2	Kumhanya	0 = Haazivikanwi, asina kugadzirira, akagadzirira kutanga, kana kugumburwa.
			1 = Kutanga, kumhanya, kumira, kana kumhanya.
	3	Reserved	–
	4	Ready	0 = Tanga kana kumisa murairo usingagamuchirwi.
			1 = Tanga kana kumisa murairo unogamuchirwa.
	5	Kudzora kubva kumambure	1 = Nguva dzose, kunze kwechirongwa chepurogiramu.
	6	Local/Kure	0 = Kudzora kwenzvimbo.
			1 = Remote control.
	7	At reference	1 = Kumhanya (rakazara voltage pamota).
1	0–7	Status	0 = Hazvizivikanwe (menyu yakavhurwa).
			2 = Nyoro yekutanga haina kugadzirira (kutangazve kunonoka kana kunonoka kupisa).
			3 = Yakagadzirira kutanga (kusanganisira yambiro yenyika).
			4 = Kutanga kana kumhanya.
			5 = Kumira kwakapfava.
			7 = Rwendo.
			8 = Jog kumberi.
			9 = Jog reverse.
2–3	0–15	Kodhi yerwendo/yambiro	Ona makodhi erwendo muTafura 7.4.
41)	0–7	Motokari ikozvino (yakaderera byte)	Zvazvino (A).
51)	0–7	Motor current (high byte)
6	0–7	Motokari 1 tembiricha	Motokari 1 yekupisa modhi (%).
7	0–7	Motokari 2 tembiricha	Motokari 2 yekupisa modhi (%).
8–9	0–5	Reserved	–
	6–8	Product parameter list version	–
	9–15	Chigadzirwa mhando kodhi2)	–
10	0–7	Reserved	–
11	0–7	Reserved	–
123)	0–7	Yakachinjwa parameter nhamba	0 = Hapana ma parameter achinja.
			1 ~ 255 = Nhamba yenhamba yekupedzisira parameter yakashandurwa.
13	0–7	Parameters	Huwandu hwehuwandu hwema paramita anowanikwa mune yakapfava yekutanga.
14–15	0–13	Yakachinja kukosha kweparameter3)	Kukosha kwekupedzisira parameter yakashandurwa, sezvakaratidzwa mubyte 12.
	14–15	Reserved	–

Byte	Bit	Function	Details
16	0–4	Soft starter state	0 = Yakachengetwa.
			1 = Yakagadzirira.
			2 = Kutanga.
			3 = Kumhanya.
			4 = Kumira.
			5 = Haina kugadzirira (kutangazve kunonoka, tangazve tembiricha cheki).
			6 = Kubviswa.
			7 = Programming mode.
			8 = Jog kumberi.
			9 = Jog reverse.
	5	Yambiro	1 = Yambiro.
	6	Initialized	0 = Kusazivikanwa.
			1 = Yakatangwa.
	7	Kudzora kwenzvimbo	0 = Kudzora kwenzvimbo.
			1 = Remote control.
17	0	Parameters	0 = Maparamendi akachinja kubva pakupedzisira parameter yakaverengwa.
			1 = Hapana ma parameter achinja.
	1	Phase kutevedzana	0 = Negative phase sequence.
			1 = Positive phase sequence.
	2–7	Kodhi yerwendo4)	Ona makodhi erwendo muTafura 7.4.
18–19	0–13	Current	Avhareji rms ikozvino kumativi ose matatu.
	14–15	Reserved	–
20–21	0–13	Yazvino (% mota FLC)	–
	14–15	Reserved	–
22	0–7	Motokari 1 yekupisa modhi (%)	–
23	0–7	Motokari 2 yekupisa modhi (%)	–
24–255)	0–11	Simba	–
	12–13	Chikero chesimba	–
	14–15	Reserved	–
26	0–7	% simba chinhu	100% = simba chinhu che1.
27	0–7	Reserved	–
28	0–7	Reserved	–
29	0–7	Reserved	–
30–31	0–13	Chikamu chekutanga ikozvino (rms)	–
	14–15	Reserved	–
32–33	0–13	Chikamu chekutanga ikozvino (rms)	–
	14–15	Reserved	–
34–35	0–13	Chikamu chekutanga ikozvino (rms)	–
	14–15	Reserved	–
36	0–7	Reserved	–
37	0–7	Reserved	–
38	0–7	Reserved	–
39	0–7	Reserved	–
40	0–7	Reserved	–
41	0–7	Reserved	–
42	0–7	Parameter rondedzero diki kudzokorora	–
43	0–7	Parameter rondedzero huru yekudzokorora	–
44	0–3	Digital input state	Kune zvese zvinopinda, 0 = vhura, 1 = yakavharwa.
			0 = Kutanga.
			1 = Mira.
			2 = Reset.
			3 = Input A
	4–7	Reserved	–

Byte	Bit	Function	Details
45	0–7	Reserved	–

Tafura 7.2 Zvimiro Zvinoshandiswa Kubvunza Mamiriro eiyo Yakapfava Starter

1. Kune mamodheru MCD5-0053B uye madiki, kukosha uku kwakakura zvakapetwa kagumi pane kukosha kwakaratidzwa paLCP.
2. Chigadzirwa mhando kodhi: 4 = MCD 200, 5 = MCD 500.
3. Kuverenga mabhaiti 14-15 (yakashandurwa parameter kukosha) reset byte 12 (yakachinja parameter nhamba) uye bit 0 yebyte 17 (maparamita achinja).
   Gara uchiverenga mabhayithi 12 ne17 usati waverenga mabhayithi 14–15.
4. Bits 2–7 yebyte 17 inoshuma rwendo rwemutambi akapfava kana kodhi yambiro. Kana kukosha kwebits 0–4 yebyte 16 iri 6, nyoro inotangira yadonha. Kana diki 5 = 1, yambiro yaita uye iyo yakapfava yekutanga inoenderera mberi nekushanda.
5. Power scale inoshanda sezvinotevera:
   • 0 = Wedzera simba negumi kuti uwane W.
   • 1 = Wedzera simba negumi kuti uwane W.
   • 2 = Simba rinoratidzwa mu kW.
   • 3 = Wedzera simba negumi kuti uwane kW.

Soft Starter Yemukati Rejisa Kero
Marejista emukati mukati meiyo soft starter ane mabasa akanyorwa muTable 7.3. Aya marejista haawanikwe zvakananga kuburikidza nefieldbus.

Register	Tsanangudzo	Bits	Details
0	Version	0–5	Binary protocol version nhamba.
		6–8	Product parameter list version.
		9–15	Chigadzirwa mhando kodhi.1)
1	Device details	–	–
22)	Yakachinjwa parameter nhamba	0–7	0 = Hapana ma parameter achinja.
			1 ~ 255 = Nhamba yenhamba yekupedzisira parameter yakashandurwa.
		8–15	Huwandu hwehuwandu hwema paramita anowanikwa mune yakapfava yekutanga.
32)	Yakachinja kukosha kweparameter	0–13	Kukosha kwekupedzisira parameter yakashandurwa, sezvakaratidzwa murejista 2.
		14–15	Reserved.
4	Soft starter state	0–4	0 = Yakachengetwa.
			1 = Yakagadzirira.
			2 = Kutanga.
			3 = Kumhanya.
			4 = Kumira.
			5 = Haina kugadzirira (kutangazve kunonoka, tangazve tembiricha cheki).
			6 = Kubviswa.
			7 = Programming mode.
			8 = Jog kumberi.
			9 = Jog reverse.
		5	1 = Yambiro.
		6	0 = Yambiro.
			1 = Yakatangwa.
		7	0 = Kudzora kwenzvimbo.
			1 = Remote control.
		8	0 = Paramita dzachinja.
			1 = Hapana ma parameter achinja.2)
		9	0 = Negative phase sequence.
			1 = Positive phase sequence.
		10–15	Ona macode erwendo mukati Tafura 7.4.3)
5	Current	0–13	Avhareji rms ikozvino kumativi ose matatu.4)
		14–15	Reserved.
6	Current	0–9	Yazvino (% mota FLC).
		10–15	Reserved.

Register	Tsanangudzo	Bits	Details
7	Motokari tembiricha	0–7	Motokari 1 yekupisa modhi (%).
		8–15	Motokari 2 yekupisa modhi (%).
85)	Simba	0–11	Simba.
		12–13	Chikero chesimba.
		14–15	Reserved.
9	% Simba chinhu	0–7	100% = simba chinhu che1.
		8–15	Reserved.
10	Reserved	0–15	–
114)	Current	0–13	Chikamu chekutanga ikozvino (rms).
		14–15	Reserved.
124)	Current	0–13	Chikamu chekutanga ikozvino (rms).
		14–15	Reserved.
134)	Current	0–13	Chikamu chekutanga ikozvino (rms).
		14–15	Reserved.
14	Reserved	–	–
15	Reserved	–	–
16	Reserved	–	–
17	Parameter list version nhamba	0–7	Parameter rondedzero diki kudzokorora.
		8–15	Parameter rondedzero huru yekudzokorora.
18	Digital input state	0–15	Kune zvese zvinopinda, 0 = vhura, 1 = yakavharwa (yapfupika).
			0 = Kutanga.
			1 = Mira.
			2 = Reset.
			3 = Input A.
		4–15	Reserved.
19–31	Reserved	–	–

Tafura 7.3 Mabasa eInternal Registers

1. Chigadzirwa mhando kodhi: 4 = MCD 200, 5 = MCD 500.
2. Kuverenga kunyoresa 3 (yakashandurwa parameter kukosha) reset marejista 2 (yakachinja parameter nhamba) uye 4 (parameters yachinja). Gara uchiverenga marejista 2 uye 4 usati waverenga rejista 3.
3. Bits 10–15 dzerejista 4 shuma rwendo rwemutambi akapfava kana kodhi yambiro. Kana kukosha kwebits 0-4 kuri 6, nyoro inotangira yadonha. Kana diki 5 = 1, yambiro yaita uye iyo yakapfava yekutanga inoenderera mberi nekushanda.
4. Kune mamodheru MCD5-0053B uye madiki, kukosha uku kwakakura zvakapetwa kagumi pane kukosha kwakaratidzwa paLCP.
5. Power scale inoshanda sezvinotevera:
   • 0 = Wedzera simba negumi kuti uwane W.
   • 1 = Wedzera simba negumi kuti uwane W.
   • 2 = Simba rinoratidzwa mu kW.
   • 3 = Wedzera simba negumi kuti uwane kW.

Parameter Management (Kuverenga/Kunyora)
Parameter values ​​inogona kuverengwa kubva kana kunyorwa kune yakapfava starter.
Kana inoburitsa rejista 57 ye scanner yakakura kupfuura 0, iyo EtherNet / IP interface inonyora ese parameter marejista kune yakapfava starter.

Isa iyo inodiwa parameter values ​​mune zvakabuda marejista e scanner. Kukosha kweparameter imwe neimwe inochengetwa mune imwe rejista. Rejista imwe neimwe inoenderana ne2 bytes.

• Nyoresa 57 (bytes 114–115) inoenderana neparameter 1-1 Mota Yakazara Mutoro Wazvino.
• Iyo VLT® Soft Starter MCD 500 ine 109 paramita. Nyora 162 (bytes 324-325) inoenderana neparameter 16-13 Low Control Volts.

CHIZIVISO
Paunenge uchinyora parameter values, iyo EtherNet / IP Interface inogadziridza ese parameter kukosha mune yakapfava starter. Gara uchiisa kukosha kweiyo yega parameter.

CHIZIVISO
Kuverengera kwesarudzo dzeparameta kuburikidza nefieldbus communications kunosiyana zvishoma nenhamba yakaratidzwa paLCP. Kuverenga kuburikidza neEthernet Module kunotanga pa0, saka paparameter 2-1 Phase Sequence, sarudzo dziri 1–3 paLCP asi 0–2 kuburikidza nemodule.

Trip Codes

Code	Rwendo rudzi	MCD201	MCD202	MCD500
0	Hapana rwendo	✓	✓	✓
11	Input A rwendo			✓
20	Motor overload		✓	✓
21	Heat sink overtemperature			✓
23	L1 chikamu kurasikirwa			✓
24	L2 chikamu kurasikirwa			✓
25	L3 chikamu kurasikirwa			✓
26	Ikozvino kusaenzana		✓	✓
28	Instantaneous overcurrent			✓
29	Undercurrent			✓
50	Kupera simba	✓	✓	✓
54	Phase kutevedzana		✓	✓
55	Frequency	✓	✓	✓
60	Sarudzo isina kutsigirwa (basa hariwanikwe mukati medelta)			✓
61	FLC yakawandisa			✓
62	Parameter kunze kwehuwandu			✓
70	Miscellaneous			✓
75	Motokari thermistor		✓	✓
101	Yakawedzera nguva yekutanga		✓	✓
102	Motokari yekubatanidza			✓
104	Mhosva yemukati x (apo x ndiyo kodhi yekukanganisa yakatsanangurwa mukati Tafura 7.5)			✓
113	Kutanga kutaurirana (pakati pemodule uye nyoro yekutanga)	✓	✓	✓
114	Network kutaurirana (pakati pemodule uye network)	✓	✓	✓
115	L1-T1 pfupi-yakatenderera			✓
116	L2-T2 pfupi-yakatenderera			✓
117	L3-T3 pfupi-yakatenderera			✓
1191)	Nguva-yakawandisa (bypass overload)		✓	✓
121	Bhatiri/wachi			✓
122	Thermistor circuit			✓

Tafura 7.4 Trip Code Yakataurwa muBytes 2–3 uye 17 yeState Commands

YeVLT® Soft Starter MCD 500, kuchengetedzwa kwenguva-yakawandisa kunongowanikwa pamamodhi adarika mukati.

Internal Fault X

Kukanganisa kwemukati	Mharidzo paLCP
70–72	Current Read Err. Lx
73	TARIRA! Bvisa Mains Volts
74–76	Motokari yekubatanidza Tx
77–79	Kupfura Kunokundikana Px
80–82	VZC Yakakundikana Px
83	Low Control Volts
84–98	Mhosva yemukati X. Bata mutengesi wepanzvimbo nekodhi yekukanganisa (X).

Tafura 7.5 Internal Fault Code Yakabatana neTrip Code 104

CHIZIVISO
Inowanikwa chete paVLT® Soft Starters MCD 500. Kuti uwane mamwe mashoko, ona VLT® Soft Starter MCD 500 Operating Guide.

Network Dhizaini

Iyo Ethernet Module inotsigira nyeredzi, mutsara, uye mhete topology.

Nyeredzi Topology
Mune nyeredzi network, ese ma controller uye zvishandiso zvinobatana kune yepakati network switch.

Line Topology
Mumutsara wemutsara, mutongi anobatanidza zvakananga kune 1 port yekutanga EtherNet / IP Module. Iyo 2nd Ethernet port yeEtherNet / IP Module inobatanidza kune imwe module, iyo inozobatanidza kune imwe module kusvikira zvese zvishandiso zvabatanidzwa.

CHIZIVISO
Iyo EtherNet / IP Module ine switch yakabatanidzwa kubvumira data kuti ipfuure mumutsara wetopology. Iyo EtherNet/IP Module inofanira kunge ichiwana simba rekutonga kubva kune yakapfava inotangira kuti switch ishande.

CHIZIVISO
Kana kuwirirana pakati pezvishandiso zviviri kukanganisika, mutongi haakwanisi kutaurirana nemidziyo mushure mekuvhiringidza nzvimbo.

CHIZIVISO
Kubatana kwega kwega kunowedzera kunonoka kutaurirana nemodule inotevera. Nhamba yepamusoro yezvigadziri mumutsara wetiweki ndeye 32. Kupfuura nhamba iyi kunogona kuderedza kuvimbika kwetiweki.

Mhete Yekurira
Mune ring topology network, mutongi anobatanidza kune 1st EtherNet / IP Module kuburikidza netiweki switch. Iyo 2nd Ethernet port yeEtherNet / IP Module inobatanidza kune imwe module, iyo inozobatanidza kune imwe module kusvikira zvese zvishandiso zvabatanidzwa. Iyo yekupedzisira module inobatanidza kumashure kune switch.

CHIZIVISO
Iyo network switch inofanirwa kutsigira kurasikirwa kwekuonekwa kwemutsara.

Yakasanganiswa Topology
Network imwe chete inogona kusanganisira zvese nyeredzi uye mutsara zvikamu.

Zvinotsanangurwa

• Enclosure
  • Dimensions, W x H x D [mm (mu)] 40 x 166 x 90 (1.6 x 6.5 x 3.5)
  • Huremu 250 g (8.8 Oz)
  • Dziviriro IP20
• Mounting
  • Chirimo-chiito chepurasitiki chinomisikidza zvimedu 2
• Connections
  • Yakapfava yekutanga 6-nzira yepini musangano
  • Contacts Gold …ash
  • Networks RJ45
• Settings
  • IP kero Yakapihwa otomatiki, inogadzirika
  • Zita remudziyo Wakagoverwa otomatiki, unogadzirika
• Network
  • Link kumhanya 10 Mbps, 100 Mbps (auto-detect)
  • Duplex yakazara
  • Auto crossover
• Simba
  • Kushandisa (yakagadzikana mamiriro, yakakura) 35 mA pa24 V DC
  • Reverse polarity yakachengetedzwa
  • Galvanically isolated
• Certification
  • RCM IEC 60947-4-2
  • CE IEC 60947-4-2
  • ODVA EtherNet/IP conformance yakaedzwa

Danfoss haigamuchire mutoro wezvikanganiso zvinogona kuitika mumakatalog, mabhurocha uye zvimwe zvakadhindwa. Danfoss inochengetedza kodzero yekushandura zvigadzirwa zvayo pasina chiziviso. Izvi zvinoshandawo kune zvigadzirwa zvagara zvakarongeka zvichipihwa kuti shanduko dzakadaro dzinogona kuitwa pasina sub sequential shanduko ichidikanwa mune zvakatemerwa kare. Ese maratidziro mune ino chinyorwa zvinhu zvemakambani anoenderana. Danfoss uye Danfoss logotype zviratidzo zveDanfoss A/S. Kodzero dzese dzakachengetwa.

• Mari yezvikamu Danfoss A / S.
• Ulsnaes 1
• DK-6300 Graasten
• vlt-drives.danfoss.com

FAQ

Q: Chii chandinofanira kuita kana ndikasangana nematambudziko pakushandisa EtherNet/IP Module ine yechitatu-bato zvigadzirwa?
A: Kana ukasangana nezvipingamupinyi paunenge uchishandisa chishandiso chine zvigadzirwa zvebato rechitatu sePLCs, scanner, kana maturusi ekutuma, taura nemupi akakodzera kuti ubatsirwe.

Zvinyorwa / Zvishandiso

Danfoss MCD 202 EtherNet-IP Module [pdf] Installation Guide AN361182310204en-000301, MG17M202, MCD 202 EtherNet-IP Module, MCD 202, EtherNet-IP Module, Module

References

• User Manual