RENO BX Series Single Channel Loop Detectors

 Litlhaloso

• Mofuta oa Loop Detector: Inductive Loop Detector
• Mefuta ea Wire ea Loop: 14, 16, 18, kapa 20 AWG e nang le polyethylene e kopantsoeng ka sefapano.
• Khoele ea Loop Wire: Reno LW-120 bakeng sa 1/8 slots, Reno LW-116-S bakeng sa 1/4 slots

Kakaretso
Ka kopo netefatsa mohloli oa voltage pele o sebelisa matla. Tlhaloso ea mohlala e bonts'a matla a ho kenya a hlokehang, tlhophiso ea tlhahiso, le Fail-Safe / Fail-Sireletsehile bakeng sa detector ka tsela e latelang.Sesebelisoa se etselitsoe fektheri bakeng sa ts'ebetso ea Fail-Safe kapa Fail-Secure (sheba leibole ea yuniti). Boemo ba tlhahiso ea phepelo e 'ngoe le e 'ngoe ea tlhahiso ka mokhoa oa Fail-Safe kapa Fail-Sireletsehile bo thathamisitsoe tafoleng e ka tlase.

Relay	Fail-Sireletsehile		Hloleha-Sireletsehile
	Ho Hloka Matla	Ho hloleha ha Loop	Ho Hloka Matla	Ho hloleha ha Loop
A	Letsa	Letsa	Ha ho Call	Ha ho Call
B	Ha ho Call	Ha ho Call	Ha ho Call	Ha ho Call

Lipontšo le Litaolo

Matla / Fumana / Li-LED tse hlolehileng
Sesebelisoa se na le matšoao a le mong a botala le a mabeli a khubelu a LED a sebelisetsoang ho fana ka pontšo ea boemo ba matla a mochine, boemo ba ho tsoa, ​​le/kapa maemo a ho hlōleha ha loop. Tafole e ka tlase e thathamisa matšoao a fapaneng le meelelo ea ona.

Boemo	PWR (Matla) LED	DET (bona) LED	HLOMELA LESOA
E tima	Ha ho matla kapa matla a tlase	Output(s) Off	Lula OK
On	Matla a tloaelehileng ho sesupa	Litlhahiso li Buletsoe	Bula Loop
Khanya	N/A	4 Hz - Ho lieha ha nako ea metsotsoana e 'meli ho kentsoe tšebetsong	1 Hz - Loop e Khutšoanyane 3 Hz - Ho hloleha ha Loop Pele

Hlokomela Haeba phepelo voltage theohela ka tlase ho 75% ea boemo ba lebitso, PWR LED e tla tima, e fane ka pontšo ea pono ea matla a tlase a phepelo.tage. Li-detectors tsa mohlala oa BX li tla sebetsa ka voltage tlase joalo ka 70% ea phepelo ea lebitsotage.

Front Panel Rotary Switch (Sensitivity)
Phetoho ea rotary e nang le maemo a robeli e khetha boemo bo le bong ho tse robeli (8) joalo ka ha ho bontšitsoe tafoleng e ka tlase. O e tlase ka ho fetisisa 'me 7 e phahameng ka ho fetisisa,' me e tloaelehileng (fektheri ea kamehla) ke 3. Sebelisa boemo bo tlaase ka ho fetisisa ba kutlo bo tla lula bo lemoha koloi e nyenyane ka ho fetisisa e lokelang ho fumanoa. Se ke oa sebelisa boemo ba kutlo bo phahameng ho feta kamoo ho hlokahalang.

Boemo	0	1	2	3 *	4	5	6	7
–∆L/L	1.28%	0.64%	0.32%	0.16% *	0.08%	0.04%	0.02%	0.01%

Phanele e ka pele ea DIP e fetoha

Khafetsa (DIP Switches 1 le 2)
Maemong ao loop geometry e qobellang liloko hore li be haufi le tse ling, ho ka hlokahala hore ho khethoe maqhubu a fapaneng bakeng sa lupu ka 'ngoe ho qoba tšitiso ea loop, e tsejoang ka hore ke crosstalk. Li-switches tsa DIP 1 le 2 li ka sebelisoa ho lokisa setumo hore se sebetse ho e 'ngoe ea maqhubu a mane a tsamaellanang le Low, Medium / Low, Medium / High, le High joalo ka ha ho bontšitsoe tafoleng e ka tlase.
HLOKOMELA Ka mor'a ho fetola li-setting life kapa life tsa switjha, sebui se tlameha ho hlophisoa bocha ka ho fetola e 'ngoe ea libaka tse ling.

Fetoha		Khafetsa
	Tlase (0)	Mahareng / Tlase (1)	Mahareng / Phahameng (2)	Holimo (3) *
1	ON	TLOA	ON	TIMA*
2	ON	ON	TLOA	TIMA*

Nako ea ho Tšoara Boteng (DIP Switch 3)
Output A kamehla e sebetsa joalo ka tlhahiso ea boteng. DIP switch 3 e ka sebelisoa ho khetha e 'ngoe ea linako tse peli tsa ho ba teng; Boteng bo Lekanyelitsoeng kapa Boteng ba 'Nete™. Mefuta ka bobeli e fana ka tlhahiso ea Call ha koloi e le teng sebakeng sa ho lemoha loop. True Presence™ e khethoa ha DIP switch 3 e TLOhile. Haeba switjha ya 3 ya DIP e BUDIWE, ho kgethwa Boteng bo Lekanyeditsweng. Limited Presence e tla ts'oara tlhahiso ea Call nako e ka bang hora ho isa ho tse tharo. True Presence™ e tla tšoara Call ha feela koloi e ntse e le teng sebakeng sa ponelopele ea loop ha feela motlakase o sa sitisoe kapa mochokisi o sa hlophisoa bocha. Nako ea TruePresence™ e sebetsa feela bakeng sa likoloi tsa boholo bo tloaelehileng le literaka le liloko tsa boholo bo tloaelehileng (hoo e ka bang 12 f? to 120 fỉ). Setting ea kamehla ea feme e TIMA (True Presence™ Mode).

Sensitivity Boost (DIP Switch 4)
DIP switch 4 e ka buloa ho eketsa kutlo nakong ea nako ea ho lemoha ntle le ho fetola kutlo nakong ea nako e sa lemoheng. Karolo ea boost e na le phello ea ho eketsa maemo a sensitivity ka nakoana ho fihlela maemong a mabeli. Ha koloi e kena sebakeng sa ponelopele ea loop, detector e eketsa boemo ba kutlo ka bo eona. Hang ha koloi e sa fumanoe, detector hang-hang e khutlela boemong ba pele ba kutloisiso. Tšobotsi ena e bohlokoa haholo ho thibela ho tlohela sekolo nakong ea ho feta ha likoloi tse phahameng. Litlhophiso tsa kamehla tsa feme li TIMA (ha ho Sensitivity Boost).

Ho lieha ho hlahisa (DIP Switch 5)
Tieho ea metsotsoana e 'meli ea Outputs A le B e ka kengoa tšebetsong ka ho seta switjha ea DIP 5 sebakeng sa ON. Ho lieha ho tsoa ke nako eo sebui se liehang ho se hlahisa ka mor'a hore koloi e kene sebakeng sa ho lemoha loop. Haeba karolo ea metsotsoana e 'meli ea "Output Delay" e kentsoe tšebetsong, li-relay tsa tlhahiso li tla buloa feela ka mor'a hore metsotsoana e 'meli e fete 'me koloi e ntse e le teng sebakeng sa ho lemoha loop. Haeba koloi e tloha sebakeng sa ho lemoha sekoti ka nako ea ho lieha ha metsotsoana e 'meli, ho lemoha ho tlosoa 'me koloi e latelang e tla kena sebakeng sa ho lemoha loop e tla qala nako e ncha ea ho lieha ea metsotsoana e 'meli. Sesebelisoa se bonts'a hore koloi e ntse e bonoa empa liphetho li ntse li lieha, ka ho benya phanele e ka pele ea DET LED ka sekhahla sa Hz tse 'ne ka potoloho ea 50%. Litlhophiso tsa kamehla tsa feme li TIMA (ha ho tieho ea Output).

Relay B Fault Output (DIP Switch 6)
Ha DIP switjha 6 e le maemong a ON, Output B e tla sebetsa ka Fault mode. Ha o sebetsa ka mokhoa oa Fault, Relay B e tla fana ka pontšo ea phoso feela ha boemo ba phoso ea loop bo le teng. Haeba tahlehelo ea matla e etsahala, Relay B e tla sebetsa joalo ka tlhahiso ea Fail-Sireletsehile. Haeba boemo ba phoso ea loop bo itokisa, Relay B e tla qala ts'ebetso sebakeng sa No-Fault output. Litlhophiso tsa kamehla tsa feme li TIMA (Relay B Presence kapa Pulse).
HLOKOMELA Ho beha switjha ena ho boemo ba ON ho feta litlhophiso tsa li-switches tsa DIP 7 le 8

Relay B Output Mode (DIP Switches 7 le 8)
Relay B e na le mekhoa e mene (4) ea ts'ebetso: Pulse-on-Entry, Pulse-on-Exit, Boteng, le Fault. Mokhoa oa phoso o khethoa ka mochine oa DIP oa 6. (Sheba karolo ea Relay B Fault Output leqepheng la 2 bakeng sa lintlha.) Li-switches tsa DIP tsa 7 le 8 li sebelisetsoa ho lokisa mekhoa ea Boteng le / kapa Pulse ea tlhahiso ea Relay B. Ha e behiloe ho sebetsa ka Pulse mode (DIP switch 8 set to OFF), Relay B e ka behoa ho fana ka koloi e ntšitsoeng kapa e ntšitsoeng250. sebaka sa ho lemoha ka loop. DIP switch 7 e sebelisoa ho khetha Pulse-on-Entry kapa Pulse-on-Exit. Ha sesebelisoa sa 7 sa DIP se TIMA, ho khethoa Pulse-on-Entry. Ha sesebelisoa sa 7 sa DIP se BUTSE, ho khethoa Pulse-on-Exit. Ha e behiloe hore e sebetse ka mokhoa oa Boteng (DIP switch 8 set to ON), Nako ea ho tšoara nako ea Output B e tšoana le Output A. Tafole e ka tlase e bontša mefuta e fapaneng ea metsoako ea li-switches le mekhoa ea ho sebetsa ea Relay B.

Fetoha	Pulse-on-Entry *	Pulse-on-Exit	Boteng	Boteng
7	TIMA*	ON	TLOA	ON
8	TIMA*	TLOA	ON	ON

Seta bocha
Ho fetola sebaka sefe kapa sefe sa switjha sa DIP (ntle le 1 kapa 2) kapa boemo ba Sensitivity bo tla seta setukisi botjha. Ka mor'a ho fetola li-switches tsa khetho ea maqhubu, mochine o tlameha ho seta bocha.

Letsa Memori
Ha motlakase o tlositsoe metsotsoana e 'meli kapa ka tlase ho moo, sebui se tla hopola ka bo eona hore na koloi e ne e le teng le Call e ntse e sebetsa. Ha motlakase o tsosolositsoe, mochine o tla tsoelapele ho ntša Mohala ho fihlela koloi e tloha sebakeng sa ho lemoha loop (tahlehelo ea matla kapa li-dips tsa metsotsoana e 'meli kapa ka tlaase ho moo li ke ke tsa theola letsoho la heke holim'a likoloi ha li ntse li emetse hekeng).

Litlhahlobo tsa Loop e hlolehileng
The FAIL LED e bontša hore na loop e ntse e le ka har'a mamello kapa che. Haeba loop e sa mamellehe, FAIL LED e bontša hore na loop e khutsufalitsoe (e le 'ngoe ea Hz flash rate) kapa e bulehile (e tsitsitseng ON). Haeba le ha lupu e khutlela ho mamello, FAIL LED e tla benya ka lebelo la li-flashes tse tharo-ka motsotsoana ho bontša hore phoso ea nakoana ea loop e etsahetse 'me e lokisitsoe. Sekhahla sena sa flash se tla tsoela pele ho fihlela phoso e 'ngoe ea loop e etsahala, sebui se setiloe bocha, kapa matla a sesupo a sitisoa.

Pin Connections (Reno A & E Wiring Harness Model 802-4)

Pin	Mobala oa Mohala	Mosebetsi
		Litholoana tse Tloaelehileng	Liphello tse Fetotsoeng	Liphetho tsa Euro
1	Ntsho	AC Line / DC +	AC Line / DC +	AC Line / DC +
2	Bosoeu	AC Neutral / DC E tloaelehileng	AC Neutral / DC E tloaelehileng	AC Neutral / DC E tloaelehileng
3	namunu	Relay B, Hangata e butsoe (NO)	Relay B, Hangata ho kwalwa (NC)	Relay B, Hangata e butsoe (NO)
4	Botala	Ha ho Khokahano	Ha ho Khokahano	Relay B, Tloaelehileng
5	Bosehla	Relay A, Tloaelehileng	Relay A, Tloaelehileng	Relay A, Hangata e butsoe (NO)
6	Boputsoa	Relay A, Hangata e butsoe (NO)	Relay A, Hangata ho kwalwa (NC)	Relay A, Tloaelehileng
7	Hlooho	Loop	Loop	Loop
8	Brown	Loop	Loop	Loop
9	Khubedu	Relay B, Tloaelehileng	Relay B, Tloaelehileng	Ha ho Khokahano
10	Violet kapa Black / White	Relay A, Hangata ho kwalwa (NC)	Relay A, Hangata e butsoe (NO)	Relay A, Hangata ho kwalwa (NC)
11	Bosoeu / Botala kapa Bokhubelu / Bosoeu	Relay B, Hangata ho kwalwa (NC)	Relay B, Hangata e butsoe (NO)	Relay B, Hangata ho kwalwa (NC)

Hlokomela Likhokahano tsohle tsa phini tse thathamisitsoeng ka holimo li sebelisoa ka motlakase, li-loop tse hoketsoeng, 'me ha ho koloi e fumanoeng.
Litemoso Ka thoko, bakeng sa lupu e 'ngoe le e 'ngoe, para e sothehileng e lokela ho etsoa e nang le lithapo tse peli feela (2) tse mathang sebaka sohle ho tloha ho lupu ho ea ho sesupa (ho kenyeletsoa le lithapo tsohle tsa likhoele) bonyane li-twist tse tšeletseng (6) tse felletseng leotong le leng le le leng. Bakeng sa ts'ebetso e se nang mathata, ho khothaletsoa haholo hore likhokahano tsohle (ho kenyeletsoa lihokelo tse crimped) li rekisoe.

Ho kenya Loop
 Litšobotsi tsa ho lemoha ha koloi tsa mochine oa inductive loop li susumetsoa haholo ke boholo ba lupu le ho ba haufi le lintho tsa tšepe tse tsamaeang joalo ka liheke. Likoloi tse kang lithuthuthu tse nyane le literaka tsa libethe tse phahameng li ka bonoa ka ts'epo haeba ho khethiloe loop ea boholo bo nepahetseng. Haeba loop e behiloe haufi haholo le heke ea tšepe e tsamaeang, mochine o ka lemoha heke. Sets'oants'o se ka tlase se reretsoe ho bonts'a litekanyo tse tla susumetsa likarolo tsa ho lemoha.

Kakaretso Melao

1. Bophahamo ba ho lemoha ha lupu ke 2/3 leoto le lekhutšoane (A kapa B) la lupu. Example: Leoto le lekhutšoanyane = maoto a 6, Bophahamo ba ho lemoha = maoto a 4.
2. Ha bolelele ba leoto A bo ntse bo eketseha, sebaka sa C se tlameha ho eketseha.

A =	6ft	9ft	12ft	15ft	18ft	21ft
C=	3ft	4ft	4.5ft	5ft	5.5ft	6ft

Bakeng sa tlhahlobo e tšepahalang ea lithuthuthu tse nyane, maoto A le B ha aa lokela ho feta maoto a 6.

1. Tšoaea sebopeho sa lupu holim'a tsela e katiloeng. Tlosa likhutlo tse bohale tsa ka hare tse ka senyang sekoaelo sa terata ea loop. ¡etsa sakha hore e sehe ka botebo (hangata 2″ ho isa ho 2.5″) e netefatsang bonyane 1″ ho tloha holimo ho terata ho ea sebakeng se katiloeng. Bophara ba sehiloeng sa sakha bo lokela ho ba kholo ho feta bophara ba terata ho qoba tšenyo ea terata ha e behiloe sekoting sa sakha. Khaola li-loop le li-feeder slots. Tlosa lithōle tsohle ho tloha sekoting sa saw ka moea o hatelitsoeng. Etsa bonnete ba hore karolo e ka tlase ea slot e boreleli.
2. Ho khothaletsoa haholo hore bolelele bo sa khaotseng ba terata bo sebelisoe ho etsa loop le feeder ho detector. Loop wire hangata ke 14, 16, 18, kapa 20 AWG e nang le polyethylene e hoketsoeng ka sefapano. Sebelisa thupa ea patsi kapa rolara ho kenya terata ka tlase ho sekotjana sa sakha (u se ke ua sebelisa lintho tse bohale). Koahela terata ka har'a sekotjana sa saha ea lupu ho fihlela palo e batloang ea ho tjeka e fihletsoe. Phetoho e 'ngoe le e 'ngoe ea terata e tlameha ho batalla holim'a mothinya o fetileng.
3. Mohala o tlameha ho sotheha hammoho bonyane makhetlo a 6 ka leoto ho tloha qetellong ea sekotjana sa sakha ho ea ho sesupa.
4. Mohala o tlameha ho ts'oaroa ka thata ka har'a slot ka 1" likotoana tsa backer rod ka maoto a 1 ho isa ho a mabeli. Sena se thibela terata ho phaphamala ha loop sealant e sebelisoa.
5. Kenya sealant. The sealant e khethiloeng e lokela ho ba le thepa e ntle ea ho khomarela e nang le litšobotsi tsa ho fokotsa le ho atolosa tse tšoanang le tsa thepa ea motsamao

FAQs

P: Ke mefuta efe ea terata e khothalletsoang bakeng sa ho kenya loop?
A: Mefuta ea terata ea Loop e khothalelitsoeng ke 14, 16, 18, kapa 20 AWG e nang le li-cross-linked polyethylene insulation.

P: Ke lokela ho lokisa litekanyo tsa loop joang bakeng sa phumano e nepahetseng ea koloi?
A: Latela litataiso tse bukeng ea ho lokisa litekanyo tsa loop A, B, le C ho latela bolelele ba liheke le mofuta oa koloi.

P: Ke eng e khothaletsoang terata ea loop bakeng sa boholo bo fapaneng ba slot?
A: Reno LW-120 e buelloa bakeng sa 1/8 slots, le Reno LW-116-S e buelloa bakeng sa 1/4 slots.

Litokomane / Lisebelisoa

RENO BX Series Single Channel Loop Detectors [pdf] Buka ea Taelo BX Series Single Channel Loop Detectors, BX Series, Single Channel Loop Detectors, Channel Loop Detectors, Loop Detectors.

Litšupiso

• Bukana ea Mosebelisi