RENO-B4 Single Channel Loop Detectors
Tlhahisoleseding ya Sehlahiswa
- Lebitso la Sehlahiswa: Model B Series Single Channel Loop Detectors
- Moetsi: Reno A&E
- Aterese: 4655 Aircenter Circle Reno, NV 89502-5948 USA
- Mohala: 775-826-2020
- Fax: 775-826-9191
- Websebaka: www.renoae.com
- Email: contact@renoae.com
Litaelo tsa Tšebeliso ea Sehlahisoa
- Pele o sebelisa matla, netefatsa mohloli voltage.
- Tlhaloso ea mohlala e bonts'a matla a ho kenya a hlokehang, tlhophiso ea tlhahiso, sensitivity boost configuration, le Fail-Safe/Fail-Sireletsehile tlhophiso bakeng sa detector.
- Haeba mohlala o na le pina e ka morao, 11-pin, Ampsehokelo sa setaele sa henol, se kentsoe mehlala ea B-3, B-4, le B-8. Haeba e na le sehokelo se ka morao se kentsoeng, 10-pin, MS, se kentsoe mefuta ea B-1, B-5, le B-35.
- Sesebelisoa se etselitsoe fektheri bakeng sa ts'ebetso ea Fail-Safe kapa Fail-Secure (sheba leibole ea yuniti).
- Boemo ba tlhahiso ea phepelo e 'ngoe le e 'ngoe ea tlhahiso ka mokhoa oa Fail-Safe kapa Fail-Sireletsehile bo thathamisitsoe tafoleng e ka tlase.
| Relay | Fail-Sireletsehile | Hloleha-Sireletsehile |
|---|---|---|
| A | Ho hloleha ha Matla Ho letsetsa | Ho hloleha ha Matla No Call |
| B | Loop Failure Call | Loop Failure No Call |
- Sesebelisoa se na le LED e le 'ngoe e tala (PWR) le li-LED tse peli tse khubelu (DET le FAIL) ho bontša boemo ba matla, boemo ba ho tsoa, le / kapa maemo a ho hlōleha ha loop.
- Li-LED tsa maqhubu li fana ka pontšo ea maqhubu a ts'ebetso ea detector ea hajoale.
- Ho na le li-switches tse peli tse ka pele tsa li-pushbutton
- SETA HAPE: Tobetsa ho seta sesupa botjha.
- Li-switches tsa ka hare tsa DIP li na le mesebetsi e latelang
- Kutloelo-bohloko: Beha kutloisiso ho ea ka tafole tlas'a karolo ea Sensitivity.
- Teeho ea Bobeli ea Bobeli: Kenya tieho ea nako ea metsotsoana e 'meli.
- Sensitivity Boost: Numella matla a kutlo (feela mehlala e nang le SB).
- Tsoa ho Pulse Relay B: Seta mokhoa oa pulse bakeng sa Relay B.
- Boteng bo Lekanyelitsoeng: Beha mokhoa o lekanyelitsoeng oa ho ba teng bakeng sa Relay B.
- Entry Pulse Relay B: Beha pulse mode bakeng sa Relay B ntle le tieho.
- True PresenceTM Presence Mode Relay B: Seta mokhoa oa boteng oa True PresenceTM bakeng sa Relay B.
Hlokomela: Litlhophiso tsa kamehla li boletsoe tafoleng.
- Kamora ho fetola tlhophiso ya frequency, tobetsa konopo e ka pele RESET konopo ho seta sesupa botjha.
Ka kopo sheba bukana e felletseng ea mosebelisi bakeng sa litaelo tse felletseng tsa ho kenya le ho sebetsa.
MOHLALA B LEHLOKO
LITŠOANTŠI TSA KHALE TSA KHALE
LITAELO TSA HO KENYA LE HO SEBELISA
Kakaretso
Ka kopo netefatsa mohloli voltage pele o sebelisa matla. Tlhaloso ea mohlala e bonts'a matla a ho kenya a hlokehang, tlhophiso ea tlhahiso, tlhophiso e matlafatsang maikutlo, le tlhophiso ea Fail-Safe / Fail-Sireletsehile bakeng sa detector ka tsela e latelang.
HLOKOMELA: Mefuta ea B-3, B-4 le B-8 e kentsoe ka morao, 11-pin, Ampsehokelo sa setaele sa henol. Meetso ea B-1, B-5, le B-35 e kentsoe sehokelo se ka morao se kentsoeng, li-pin tse 10, sehokelo sa setaele sa MS.
Sesebelisoa se etselitsoe fektheri bakeng sa ts'ebetso ea Fail-Safe kapa Fail-Secure (sheba leibole ea yuniti). Boemo ba tlhahiso ea phepelo e 'ngoe le e 'ngoe ea tlhahiso ka mokhoa oa Fail-Safe kapa Fail-Sireletsehile bo thathamisitsoe tafoleng e ka tlase.
| Relay A | Ho Hloka Matla
Letsa |
Fail-Sireletsehile | Ho hloleha ha Loop
Letsa |
Hloleha-Sireletsehile | |
| Ho Hloka Matla
Ha ho Call |
Ho hloleha ha Loop
Ha ho Call |
||||
| B | Ha ho Call | Ha ho Call | Ha ho Call | Ha ho Call | |
Lipontšo le Litaolo
Matla / Fumana / Li-LED tse hlolehileng
Sesebelisoa se na le matšoao a le mong a botala le a mabeli a khubelu a LED a sebelisetsoang ho fana ka pontšo ea boemo ba matla a mochine, boemo ba ho tsoa, le/kapa maemo a ho hlōleha ha loop. Tafole e ka tlase e thathamisa matšoao a fapaneng le meelelo ea ona.
| Boemo | PWR (Matla) LED | DET (Bona) LED | HLOMELA LESOA |
| E tima | Ha ho matla kapa matla a tlase | Output(s) Off | Lula OK |
| On | Matla a tloaelehileng a ho detector | Litlhahiso li Buletsoe | Bula Loop |
| Khanya | N/A | 4 Hz (50% potoloho ea mosebetsi)
Tieho ea nako ea bobeli ea bobeli e kentsoe tšebetsong |
1 Hz (50% mosebetsi oa potoloho) Shorted Loop
1 Hz (5% potoloho ea mosebetsi) E emetse ho lokolloa ha MOHLAKANE pushbutton ho kenya mokhoa oa ho hlahloba (sheba Failed Loop Diagnostics) |
HLOKOMELA: Haeba phepelo voltage theohela ka tlase ho 75% ea boemo ba lebitso, PWR LED e tla tima, e fane ka pontšo ea pono ea matla a tlase a phepelo.tage. Li-detectors tsa Model B li tla sebetsa ka matla a phepelotage tlase joalo ka 70% ea phepelo ea lebitsotage.
Maqhubu a LED
Lipontšo tse 'nè tse khubelu tsa LED li fana ka pontšo ea maqhubu a sebetsang a mochine oa hona joale.
Liphetoho tsa Pushbutton tsa Panel e ka Pele
Likhokahano tse peli tsa nakoana, li-switches tsa pushbutton li sebelisoa ho laola tse latelang. RESET - Sututsa konopo e ka pele e kentsoeng e ngotsoeng RESET ho seta sesupa bocha. FREQ - Maemong ao geometry ea loop e qobellang liloko hore li be haufi le tse ling, ho ka hlokahala ho khetha maqhubu a fapaneng bakeng sa lupu ka 'ngoe ho qoba tšitiso ea loop, e tsejoang ka hore ke crosstalk. Phanele e ka pele e kentsoeng li-pushbutton e ngotsoeng FREQ e ka sebelisoa ho hlophisa detector hore e sebetse ho e 'ngoe ea maqhubu a mane (4) a tsamaisanang le Low, Medium / Low, Medium / High, le High. Tobetsa konopo ea FREQ ho penya le ho khetha e 'ngoe ea li-frequency tse' nè.
HLOKOMELA: Kamora ho fetola tlhophiso ya maqhubu, setshupane se tlameha ho setwa botjha ka ho tobetsa konopo e ka pele ya RESET.
Liphetoho tsa ka hare tsa DIP
| Fetoha | ON | TLOA | Feme ea kamehla |
| 1 | Kutloelo-bohloko
(Sheba Lethathamo tlas'a Karolo ea Sensitivity) |
TLOA | |
| 2 | ON | ||
| 3 | ON | ||
| 4 | Teeho ea Bobeli ea Bobeli | Ha ho tieho | TLOA |
| 5 | Sensitivity Boost | Ha ho Matlafatso | TIMA* |
| 6 | Tsoa ho Pulse Relay B | Entry Pulse Relay B | TLOA |
| 7 | Boteng bo Lekanyelitsoeng | Boteng ba 'NeteTM | TLOA |
| 8 | Pulse Mode Relay B | Relay ea Mokhoa oa Boteng B | ON ** |
* Meetso ea Sensitivity Boost (SB) e na le DIP switch 5 e behiloeng sebakeng sa ON. ** Meetso ea Dual Presence (DP) e na le DIP switch 8 e behiloeng boemong ba HO TLOHA.
Sensitivity (DIP Switches 1, 2, le 3)
Li-switches tsa DIP 1, 2, le 3 khetha e 'ngoe ho tse robeli (8) tsa maemo a kutlo tse teng joalo ka ha ho bonts'itsoe lethathamong le ka tlase. 0 ke boemo bo tlaase ka ho fetisisa, 3 bo tloaelehile, 'me 7 ke boemo bo phahameng ka ho fetisisa. Sebelisa mokhoa o tlase oa sensitivity o tla lula o bona koloi e nyane haholo e lokelang ho bonoa. Se ke oa sebelisa boemo ba kutlo bo phahameng ho feta kamoo ho hlokahalang.
| Fetoha | Kutloelo-bohloko | |||||||||||||||||||||||
| 0 | 1 | 2 | 3 * | 4 | 5 | 6 | 7 | |||||||||||||||||
| 1 | TLOA | TLOA | TLOA | TIMA* | ON | ON | ON | ON | ||||||||||||||||
| 2 | TLOA | TLOA | ON | HO TSOELA* | TLOA | TLOA | ON | ON | ||||||||||||||||
| 3 | TLOA | ON | TLOA | HO TSOELA* | TLOA | ON | TLOA | ON | ||||||||||||||||
- * Litlhophiso tsa kamehla tsa feme.
Ho lieha ho hlahisa (DIP Switch 4)
Tieho ea metsotsoana e 'meli ea Outputs A le B e ka kengoa tšebetsong ka ho seta switjha ea DIP 4 sebakeng sa ON. Ho lieha ho tsoa ke nako eo sebui se liehang ho se hlahisa ka mor'a hore koloi e kene sebakeng sa ho lemoha loop. Haeba karolo ea bobeli ea bobeli ea "Output Delay" e kentsoe tšebetsong, li-relay tsa tlhahiso li tla buloa feela ka mor'a hore metsotsoana e 'meli e fete 'me koloi e ntse e le teng sebakeng sa ho lemoha loop. Haeba koloi e tloha sebakeng sa ho lemoha sekoahelo nakong ea tieho ea bobeli ea metsotsoana e 'meli, ho lemoha ho tlosoa 'me koloi e latelang e tla kena sebakeng sa ho lemoha loop e tla qala nako e ncha ea ho lieha ha metsotsoana e 'meli. Sesebelisoa se fana ka pontšo ea hore koloi e ntse e fumanoa empa hore liphello li ntse li lieha, ka ho khantša phanele e ka pele ea DET LED ka lebelo la Hz tse 'nè ka potoloho ea mosebetsi oa 50%. Litlhophiso tsa kamehla tsa feme li TIMA (ha ho tieho ea Output).
Sensitivity Boost (DIP Switch 5)
DIP switch 5 e ka buloa ho eketsa kutlo nakong ea nako ea ho lemoha ntle le ho fetola kutlo nakong ea nako e sa lemoheng. Karolo ea boost e na le phello ea ho eketsa maemo a sensitivity ka nakoana ho fihlela maemong a mabeli. Ha koloi e kena sebakeng sa ponelopele ea loop, detector e eketsa boemo ba kutlo ka bo eona. Hang ha koloi e sa fumanoe, detector hang-hang e khutlela boemong ba pele ba kutloisiso. Karolo ena e bohlokoa haholo ho thibela ho tlohela sekolo nakong ea ho feta ha likoloi tsa libethe tse phahameng. Litlhophiso tsa kamehla tsa feme li TIMA (ha ho Sensitivity Boost) ntle le haeba ho boletsoe ts'ebetso ea sensitivity boost (SB), moo boemo ba kamehla ba feme e BUTSANG (Sensitivity Boost).
Relay B Pulse Mode (DIP Switch 6)
Relay B ke tlhahiso ea pulse. Mokhoa oa eona oa ho hlahisa li-pulse o laoloa ke DIP switch 6. Relay B e ka lokisoa hore e hlahise sekhahla se le seng sa 250 millisecond ha koloi e kena sebakeng sa ho lemoha loop (Pulse-on-Entry) kapa ha koloi e tloha sebakeng sa ho lemoha loop (Pulse- ho Tsoa). Pulse-on-Entry e khethoa ha DIP switch 6 e TLOhile. Pulse-on-Exit e khethiloe ha DIP switch 6 e BUTSE. DIP switch 6 ha e na phello ho Relay A (sehlahisoa sa boteng). Litlhophiso tsa kamehla tsa feme li TIMA (Pulse-on-Entry).
HLOKOMELA: Ho hlophisoa ha sesebelisoa sena sa DIP ha ho na phello holim'a mokhoa oa tlhahiso ea Relay B haeba DIP switch 8 e behiloe sebakeng sa OFF (Relay ea Presence Mode B). Bakeng sa lintlha tse ling, sheba karolo ea Relay B Output Mode leqepheng la 3.
Nako ea ho Tšoara Boteng (DIP Switch 7)
Output A kamehla e sebetsa joalo ka tlhahiso ea boteng. DIP switch 7 e ka sebelisoa ho khetha e 'ngoe ea linako tse peli tsa ho ba teng; Boteng bo Lekanyelitsoeng kapa Boteng ba 'NeteTM. Mefuta ka bobeli e fana ka tlhahiso ea Call ha koloi e le teng sebakeng sa ho lemoha loop. True PresenceTM e a khethoa ha DIP switch 3 e TLOhile. Haeba switjha ya 3 ya DIP e BUDIWE, ho kgethwa Boteng bo Lekanyeditsweng. Limited Presence e tla ts'oara tlhahiso ea Call nako e ka bang hora ho isa ho tse tharo. True PresenceTM e tla tšoara Call ha feela koloi e ntse e le teng sebakeng sa ho lemoha loop hafeela motlakase o sa sitisoe kapa mochokisi o sa seta bocha. Nako ea 'Nete ea PresenceTM e sebetsa feela bakeng sa likoloi tsa boholo bo tloaelehileng le literaka le bakeng sa loops ea boholo bo tloaelehileng (hoo e ka bang 12 ft2 ho ea ho 120 ft2). Setting ya kamehla ya feme e TIMA (True PresenceTM Mode).
Relay B Output Mode (DIP Switch 8)
Relay B e na le mekhoa e 'meli ea ts'ebetso; Pulse kapa Boteng. Mokhoa oa eona oa tlhahiso o laoloa ke DIP switch 8. Ha e behiloe ho sebetsa ka Pulse Mode (DIP switch 8 ON), Relay B e hlahisa pulse ea 250 millisecond ha koloi e kena sebakeng sa ho lemoha loop kapa ha koloi e tloha sebakeng sa ho lemoha loop. (Sheba karolo ea Relay B Pulse Mode leqepheng la 2 bakeng sa lintlha tse qaqileng.) Ha e behiloe hore e sebetse Mokhoeng oa Boteng (DIP switch 8 OFF), tlhahiso ea Relay B e tšoana le ea Relay A. (Sheba karolo ea Presence Hold Time ka holimo bakeng sa lintlha.) Litlhophiso tsa kamehla tsa fektheri li ON (Pulse Mode Relay B) ntle le haeba ts'ebetso ea dual presence (DP) e boletsoe, moo boemo ba feme ea kamehla bo TIMA (Presence Mode Relay B).
Letsa Memori
Ha motlakase o tlositsoe metsotsoana e 'meli kapa ka tlase ho moo, sebui se tla hopola ka bo eona hore na koloi e ne e le teng le Call e ntse e sebetsa. Ha motlakase o tsosolositsoe, mochine o tla tsoelapele ho ntša Mohala ho fihlela koloi e tloha sebakeng sa ho lemoha loop (tahlehelo ea matla kapa li-dips tsa metsotsoana e 'meli kapa ka tlaase ho moo li ke ke tsa theola letsoho la heke holim'a likoloi ha li ntse li emetse hekeng).
Litlhahlobo tsa Loop e hlolehileng
The FAIL LED e fana ka pontšo ea hore na loop e teng ka har'a mamello kapa che. Haeba loop e sa mamellehe, FAIL LED e bontša hore na loop e khutsufalitsoe (e le 'ngoe ea Hz flash rate) kapa e bulehile (e tsitsitseng ON). Haeba le ha loop e khutlela ka hare ho mamello, FAIL LED e tla tima ho bontša hore boemo ba phoso ea loop bo lokisitsoe le hore loop e boetse e le ka har'a mamello.
Mohloli oa Model B o boloka ka bohona mofuta oa ho qetela oa loop memoring e sa fetoheng. Ho fumana mofuta oa ho hloleha ha lupu e qetetseng ho etsahala, tobetsa 'me u tšoare konopo ea FREQ bonyane metsotsoana e meraro. Ha FAIL LED e qala ho benya ka sekhahla se le seng sa Hz ka potoloho ea 5%, lokolla konopo ea FREQ. Mobutla o tla bonts'a mofuta oa ho qetela oa ho hloleha ha loop o fumanoeng (haeba o teng). Pontšo ena e tla hlahisoa hang ka metsotsoana e ka bang leshome le metso e mehlano ntle le haeba e felisitsoe ka ho tobetsa konopo ea RESET kapa FREQ. Memori e sa fetoheng e sebelisoang ho boloka mofuta oa ho qetela oa loop e hlakolwa ka boyona nako le nako ha e botswa dipotso.
Pin Connections
Mehlala ea B-3, B-4, le B-8 (Reno A&E Wiring Harness Model 802-4)
| Pin | Mobala oa Mohala | Mosebetsi |
| 1 | Ntsho | AC Line / DC + |
| 2 | Bosoeu | AC Neutral / DC E tloaelehileng |
| 3 | namunu | Relay B, Ka tloaelo Bula (NO) |
| 4 | Botala | Ha ho Khokahano |
| 5 | Bosehla | Relay A, Tloaelehileng |
| 6 | Boputsoa | Relay A, Ka tloaelo Bula (NO) |
| 7 | Hlooho | Loop |
| 8 | Brown | Loop |
| 9 | Khubedu | Relay B, Tloaelehileng |
| 10 | Violet kapa Black / White | Relay A, Hangata e Koetsoe (NC) |
| 11 | Bosoeu / Botala kapa Bokhubelu / Bosoeu | Relay B, Hangata e Koetsoe (NC) |
Mehlala ea B-1, B-5, le B-35 (Reno A&E Wiring Harness Model 801-4)
| Pin | Mobala oa Mohala | Mosebetsi |
| A | Bosoeu | AC Neutral / DC E tloaelehileng |
| B | Brown | Relay A, Ka tloaelo Bula (NO) |
| C | Ntsho | AC Line / DC + |
| D | Khubedu | Loop |
| E | namunu | Loop |
| F | Bosehla | Relay A, Tloaelehileng |
| G | Boputsoa | Relay A, Hangata e Koetsoe (NC) |
| H | Botala | Sebaka sa Chassis |
| I | Violet | Relay B, Tloaelehileng |
| J | Hlooho | Relay B, Ka tloaelo Bula (NO) |
HLOKOMELA: Likhokahano tsohle tsa phini tse thathamisitsoeng ka holimo li sebelisoa ka motlakase, li-loop tse hoketsoeng, 'me ha ho koloi e fumanoeng.
Litemoso
Ka thoko, bakeng sa lupu e 'ngoe le e 'ngoe, para e sothehileng e lokela ho etsoa e nang le lithapo tse peli feela (2) tse mathang sebaka sohle ho tloha ho lupu ho ea ho sesupa (ho kenyeletsoa le lithapo tsohle tsa likhoele) bonyane li-twist tse tšeletseng (6) ka ngoe. leoto. Bakeng sa ts'ebetso e se nang mathata, ho khothaletsoa haholo hore likhokahano tsohle (ho kenyeletsoa lihokelo tse crimped) li rekisoe.
Ho kenya Loop
Litšobotsi tsa ho lemoha ha koloi tsa mochine oa inductive loop li susumetsoa haholo ke boholo ba lupu le ho ba haufi le lintho tsa tšepe tse tsamaeang joalo ka liheke. Likoloi tse kang lithuthuthu tse nyane le literaka tsa libethe tse phahameng li ka bonoa ka ts'epo haeba ho khethiloe loop ea boholo bo nepahetseng. Haeba loop e behiloe haufi haholo le heke ea tšepe e tsamaeang, mochine o ka lemoha heke. Sets'oants'o se ka tlase se reretsoe ho bonts'a litekanyo tse tla susumetsa likarolo tsa ho lemoha.
Melao e Akaretsang SLIDE KITI
- Bophahamo ba ho lemoha ha lupu ke 2/3 leoto le lekhutšoane (A kapa B) la lupu.
- ExampLe: Leoto le lekhutšoane = maoto a 6, Ho lemoha Bophahamo = 2/3 x 6 maoto = maoto a 4.
| A = | 6ft | 9ft | 12ft | 15ft | 18ft | 21ft |
| C= | 3ft | 4ft | 4.5ft | 5ft | 5.5ft | 6ft |
Ha bolelele ba leoto A bo ntse bo eketseha, sebaka sa C se tlameha ho eketseha.
Bakeng sa tlhahlobo e tšepahalang ea lithuthuthu tse nyane, maoto A le B ha aa lokela ho feta maoto a 6.
Ho kenya Loop - Mofuta oa Saw Cut
- Tšoaea sebopeho sa lupu holim'a tsela e katiloeng. Tlosa likhutlo tse bohale tsa ka hare tse ka senyang sekoaelo sa terata ea loop.
- Beha sakha hore e sehe ka botebo (hangata 2" ho isa ho 2.5 ″) e netefatsang bonyane 1 ″ ho tloha holimo ho terata ho ea holim'a tsela. Bophara ba sehiloeng sa sakha bo lokela ho ba kholo ho feta bophara ba terata ho qoba tšenyo ea terata ha e behiloe sekoting sa sakha. Khaola li-loop le li-feeder slots. Tlosa lithōle tsohle ho tloha sekoting sa saw ka moea o hatelitsoeng. Etsa bonnete ba hore karolo e ka tlase ea slot e boreleli.
- Ho khothaletsoa haholo hore bolelele bo sa khaotseng ba terata bo sebelisoe ho etsa loop le feeder ho detector. Loop wire hangata ke 14, 16, 18, kapa 20 AWG e nang le polyethylene e hoketsoeng ka sefapano. Sebelisa thupa ea patsi kapa rolara ho kenya terata ka tlase ho sekotjana sa sakha (u se ke ua sebelisa lintho tse bohale). Koahela terata ka har'a sekotjana sa saha ea lupu ho fihlela palo e batloang ea ho tjeka e fihletsoe. Phetoho e 'ngoe le e 'ngoe ea terata e tlameha ho batalla holim'a mothinya o fetileng.
- Mohala o tlameha ho sotheha hammoho bonyane makhetlo a 6 ka leoto ho tloha qetellong ea sekotjana sa sakha ho ea ho sesupa.
- Mohala o tlameha ho ts'oaroa ka thata ka har'a slot ka 1" likotoana tsa backer rod ka maoto a 1 ho isa ho a mabeli. Sena se thibela terata ho phaphamala ha loop sealant e sebelisoa.
- Kenya sealant. The sealant e khethiloeng e lokela ho ba le thepa e ntle ea ho khomarela e nang le litšoaneleho tsa ho hohela le ho atolosa tse tšoanang le tsa thepa ea katiloeng.
| LOPO PIRIMELA | NEKETSENG LEKHOPO |
| 10 maoto - 13 maoto | 5 |
| 14 maoto - 26 maoto | 4 |
| 27 maoto - 45 maoto | 3 |
| 46 maoto - 100 maoto | 2 |
| 100 maoto ho ea holimo | 1 |
- Loop Wire e khothalelitsoeng: Reno A&E LW-120 bakeng sa 1/8 ″ slots Reno A&E LW-116-S bakeng sa 1/4 ″ slots
Litokomane / Lisebelisoa
 |
RENO RENO-B4 Single Channel Loop Detectors [pdf] Buka ea Taelo RENO-B4 Single Channel Loop Detectors, RENO-B4, Single Channel Loop Detectors, Channel Loop Detectors, Loop Detectors, Detectors |
