Microsemi AC490 RTG4 FPGA: Ho Haha Setsi sa Motlakase oa Mi-V

Nalane ea Phetoho

Nalane ea ntlafatso e hlalosa liphetoho tse kentsoeng tšebetsong tokomaneng. Liphetoho li thathamisitsoe ka ntlafatso, ho qala ka khatiso ea morao-rao.

Phetolelo ea 3.0

Se latelang ke kakaretso ea liphetoho tse entsoeng tokisong ena.

• E ntlafalitse tokomane ea Libero SoC v2021.2.
• Ntlafatso ea setšoantšo sa 1, leqephe la 3 ho isa ho la 3, leqepheng la 5.
• Setšoantšo sa 4 se Fetotsoeng, leqepheng la 5, 5, leqepheng la 7 le la 18, leqepheng la 17 .
• Lethathamo la 2 le ntlafalitsoeng, leqepheng la 6 le la 3, leqepheng la 7.
• E Ekelitsoe Sehlomathiso sa 1: Ho hlophisa sesebelisoa ka FlashPro Express, leqephe la 14.
• Sehlomathiso se Ekelitsoeng 3: Ho tsamaisa TCL Script, leqepheng la 20.
• E tlositse litšupiso tsa linomoro tsa mofuta oa Libero.

Phetolelo ea 2.0
Se latelang ke kakaretso ea liphetoho tse entsoeng tokisong ena.

• Lintlha tse ling mabapi le khetho ea boema-kepe ba COM ho Setting Up the Hardware, leqepheng la 9.
• E ntlafalitsoe mokhoa oa ho khetha boema-kepe bo nepahetseng ba COM ho Running Demo, leqephe la 11.

Phetolelo ea 1.0
Khatiso ea pele ea tokomane.

Ho aha sistimi e nyane ea processor ea Mi-V

Microchip e fana ka processor ea Mi-V IP, processor ea 32-bit RISC-V le sesebelisoa sa software ho nts'etsapele meralo e thehiloeng ho processor ea RISC-V. RISC-V, mokhoa o tloaelehileng oa ho bula Instruction Set Architecture (ISA) tlas'a puso ea RISC-V Foundation, e fana ka melemo e mengata, e kenyeletsang ho nolofalletsa sechaba sa mehloli e bulehileng ho hlahloba le ho ntlafatsa li-cores ka lebelo le potlakileng ho feta li-ISA tse koetsoeng.
RTG4® FPGAs e tšehetsa Mi-V soft processor ho tsamaisa lits'ebetso tsa basebelisi. Lethathamo lena la ts'ebeliso le hlalosa mokhoa oa ho aha sesebelisoa sa processor sa Mi-V ho kenya ts'ebeliso ea mosebelisi ho tsoa ho li-RAM tse khethiloeng kapa memori ea DDR.

Litlhoko tsa Moralo
Tafole e latelang e thathamisitse litlhoko tsa hardware le software bakeng sa ho tsamaisa demo.

Letlapa la 1 • Litlhoko tsa Moqapi

Software

• Libero® System-on-Chip (SoC)
• FlashPro Express
• SoftConsole

Hlokomela: Sheba buka ea readme.txt file e fanoeng moahong files bakeng sa liphetolelo tsa software tse sebelisitsoeng le moralo ona oa litšupiso.

Hlokomela: Libero SmartDesign le lithunya tsa skrineng tsa tlhophiso tse bontšitsoeng tataisong ena ke tsa papiso feela.
Bula moralo oa Libero ho bona lintlafatso tsa morao-rao.

Lintho tse hlokahalang

Pele o qala:

1. Khoasolla le ho kenya Libero SoC (joalo ka ha ho bonts'itsoe ho websebaka sa moralo ona) ho PC e amohelang ho tsoa sebakeng se latelang: https://www.microsemi.com/product-directory/design-resources/1750-libero-soc
2. Bakeng sa moralo oa demo files sehokelo sa download: http://soc.microsemi.com/download/rsc/?f=rtg4_ac490_df

Tlhaloso ea Moralo

Boholo ba RTG4 μPROM ke 57 KB. Lisebelisoa tsa mosebelisi tse sa feteng boholo ba μPROM li ka bolokoa ho μPROM le ho etsoa ho tsoa mehopolong e ka hare ea Large SRAM (LSRAM). Lisebelisoa tse fetang boholo ba μPROM li tlameha ho bolokoa mohopolong oa kantle o sa fetoheng. Tabeng ena, bootloader e sebetsang ho tloha μPROM e hlokeha ho qala mehopolo ea SRAM ea ka hare kapa ea ka ntle ka ts'ebeliso e lebisitsoeng ho tsoa mohopolong o sa fetoheng.
Moralo oa litšupiso o bonts'a bokhoni ba bootloader ba ho kopitsa kopo e shebiloeng (ea boholo ba 7 KB) ho tloha ho SPI flash ho ea mohopolong oa DDR, le ho e etsa ho tsoa mohopolong oa DDR. Bootloader e etsoa ho tsoa mehopolong ea ka hare. Karolo ea khoutu e fumaneha ho μPROM, 'me karolo ea data e fumaneha ka hare ho Large SRAM (LSRAM).

Hlokomela: Bakeng sa tlhaiso-leseling e batsi mabapi le mokhoa oa ho aha projeke ea Mi-V bootloader Libero le mokhoa oa ho aha projeke ea SoftConsole, sheba TU0775: PolarFire FPGA: Ho aha Thupelo ea Mi-V processor Subsystem.
Setšoantšo sa 1 se bontša setšoantšo sa li-block tsa boemo bo phahameng ba moralo.

Setšoantšo sa 1 • Setšoantšo sa Thibelo ea Boemo bo Phahameng

Joalokaha ho bontšitsoe setšoantšong sa 1, lintlha tse latelang li hlalosa phallo ea data ea moralo:

• Mochine oa Mi-V o sebelisa bootloader ho tloha ho μPROM le li-LSRAM tse khethiloeng. Bootloader e hokahana le GUI ka "CoreUARTapb block" mme e emetse litaelo.
• Ha taelo ea lenaneo la SPI flash e amoheloa ho tsoa ho GUI, bootloader e hlophisa khanya ea SPI ka ts'ebeliso ea sepheo e amohetsoeng ho tsoa ho GUI.
• Ha taelo ea boot e amoheloa ho tsoa ho GUI, bootloader e kopitsa khoutu ea kopo ho tloha ho SPI flash ho ea DDR ebe e e phetha ho tloha DDR.

Sebopeho sa Tsupanako
Ho na le libaka tse peli tsa lioache (40 MHz le 20 MHz) moralong. Oscillator ea kristale ea 50 MHz e hokahane le boloko ba PF_CCC e hlahisang lioache tsa 40 MHz le 20 MHz. Oache ea sistimi ea 40 MHz e khanna sistimi e felletseng ea processor ea Mi-V ntle le μPROM. Oache ea 20 MHz e khanna RTG4 μPROM le sebopeho sa RTG4 μPROM APB. RTG4 μPROM e ts'ehetsa maqhubu a oache a fihlang ho 30 MHz. DDR_FIC e etselitsoe sebopeho sa libese sa AHB, se sebetsang ho 40 MHz. Memori ea DDR e sebetsa ho 320 MHz.
Setšoantšo sa 2 se bontša sebopeho sa clocking.

Setšoantšo sa 2 • Sebopeho sa Tshupa

Seta Sebopeho bocha
POWER_ON_RESET_N le matshwao a LOCK ke ANDed, mme letshwao la tlhahiso (INIT_RESET_N) le sebedisetswa ho seta botjha boloko ba RTG4FDDRC_INIT. Kamora ho lokolla reset ea FDDR, molaoli oa FDDR o qala ho qala, ebe ho hlahisoa lets'oao la INIT_DONE. Lets'oao la INIT_DONE le sebelisoa ho seta processor ea Mi-V bocha, li-peripheral, le li-blocks tse ling moahong.

Setšoantšo sa 3 • Seta Sebopeho bocha

Lisebelisoa tsa Hardware
Setšoantšo sa 4 se bonts'a moralo oa Libero oa moralo oa litšupiso oa Mi-V.

Setšoantšo sa 4 • SmartDesign Module

Hlokomela: Setšoantšo sa skrini sa Libero SmartDesign se bontšitsoeng bukeng ena ea kopo ke sa papiso feela. Bula morero oa Libero ho bona lintlafatso tsa morao-rao le mefuta ea IP.

IP Blocks
Setšoantšo sa 2 se thathamisa li-block tsa IP tse sebelisoang ho moralo oa litšupiso tsa processor ea Mi-V le ts'ebetso ea tsona.

Lethathamo la 2 • IP Blocks1

Litaelo tsohle tsa basebelisi ba IP le libuka tsa matsoho li fumaneha ho Libero SoC -> Catalog.

RTG4 μPROM e boloka ho fihla ho 10,400 mantsoe a 36-bit (374,400 bits of data). E ts'ehetsa feela ts'ebetso ea ho bala nakong ea ts'ebetso e tloaelehileng ea sesebelisoa kamora hore sesebelisoa se hlophisoe. MIV_RV32_C0 processor core e na le yuniti ea ho lata litaelo, lipeipi tsa ts'ebetso, le sistimi ea memori ea data. MIV_RV32_C0 processor memory system e kenyelletsa cache ea litaelo le cache ea data. MIV_RV32_C0 ea mantlha e kenyelletsa likhokahano tse peli tsa kantle tsa AHB-sehokelo sa libese sa AHB (MEM) le sebopeho sa AHB Memory Mapped I/O (MMIO). Molaoli oa cache o sebelisa sebopeho sa AHB MEM ho tlatsa litaelo le li-cache tsa data. Sehokelo sa AHB MMIO se sebelisoa bakeng sa phihlello e sa ts'oaroang ho li-peripheral tsa I/O.

Limmapa tsa memori tsa sebopeho sa AHB MMIO le sebopeho sa MEM ke 0x60000000 ho isa 0X6FFFFFF le 0x80000000 ho isa 0x8FFFFFF, ka ho latellana. Aterese ea vector ea reset ea processor ea khonahala. MIV_RV32_C0's reset ke lets'oao le sebetsang-tlase, le tlamehang ho hlakoloa ha le amahanngoa le oache ea sistimi ka sehokahanyo se secha.

MIV_RV32_C0 processor e fihlella mohopolo oa ts'ebetso ea ts'ebeliso e sebelisa sebopeho sa AHB MEM. Mohlala oa libese oa CoreAHBLite_C0_0 o hlophiselitsoe ho fana ka libaka tse 16 tsa makhoba, e 'ngoe le e 'ngoe ea boholo ba 1 MB. Mohopolo oa RTG μPROM, le li-block tsa RTG4FDDRC ​​li hokahane le bese ena. μPROM e sebelisetsoa ho boloka sesebelisoa sa bootloader.

MIV_RV32_C0 processor e tsamaisa phapanyetsano ea data lipakeng tsa liaterese 0x60000000 le 0x6FFFFFFF ho ​​sebopeho sa MMIO. Khokahano ea MMIO e hokahane le bese ea CoreAHBLite_C1_0 ho buisana le li-peripheral tse hokahaneng le libaka tsa eona tsa makhoba. Mohlala oa libese oa CoreAHBLite_C1_0 o hlophiselitsoe ho fana ka libaka tse 16 tsa makhoba, e 'ngoe le e 'ngoe ea boholo ba 256 MB. UART, CoreSPI, le CoreGPIO peripherals li hokahane le bese ea CoreAHBLite_C1_0 ka borokho ba CoreAHBTOAPB3 le bese ea CoreAPB3.

'Mapa oa memori
Lethathamo la 3 le thathamisa 'mapa oa memori oa mehopolo le li-peripheral.

Letlapa la 3 • 'Mapa oa memori

Ts'ebetsong ea Software

Moqapi oa litšupiso files e kenyelletsa sebaka sa mosebetsi sa SoftConsole se nang le merero e latelang ea software:

• Bootloader
• Sepheo sa Kopo

Bootloader
Sesebelisoa sa bootloader se hlophisitsoe ho μPROM nakong ea lenaneo la sesebelisoa. Bootloader e sebelisa mesebetsi e latelang:

• Ho hlophisa SPI Flash ka ts'ebeliso e lebeletsoeng.
• Ho kopitsa ts'ebeliso ea sepheo ho tloha ho SPI Flash ho ea mohopolong oa DDR3.
• Fetolela ts'ebetso ea lenaneo ho ts'ebeliso e reriloeng e fumanehang mohopolong oa DDR3.
  Sesebelisoa sa bootloader se tlameha ho etsoa ho tsoa ho μPROM ka LSRAM joalo ka stack. Kahoo, liaterese tsa ROM le RAM sengolong sa linker li behiloe atereseng ea ho qala ea μPROM le li-LSRAM tse khethiloeng, ka ho latellana. Karolo ea khoutu e etsoa ho tsoa ho ROM mme karolo ea data e etsoa ho tsoa ho RAM joalo ka ha ho bonts'itsoe ho Setšoantšo sa 5.

Setšoantšo sa 5 • Bootloader Linker Script

Sengoliloeng sa linker (microsemi-riscv-ram_rom.ld) se fumaneha ho
SoftConsole_Project\mivrv32im-bootloader foldara ea moralo files.

Sepheo sa Kopo
Sesebelisoa se shebiloeng se panya li-LED tse 1, 2, 3, le 4 mme se hatisa melaetsa ea UART. Ts'ebeliso e reriloeng e tlameha ho etsoa ho tsoa mohopolong oa DDR3. Kahoo, likarolo tsa khoutu le stack sengolong sa linker li behiloe atereseng ea ho qala ea memori ea DDR3 joalo ka ha ho bonts'itsoe ho Setšoantšo sa 6.

Setšoantšo sa 6 • Target Application Linker Script

Sengoloa sa linker (microsemi-riscv-ram.ld) se fumaneha ho SoftConsole_Project\miv-rv32imddr- foldara ea ts'ebeliso ea moralo. files.

Ho theha Hardware

Mehato e latelang e hlalosa mokhoa oa ho seta hardware:

1. Netefatsa hore boto e tiisitsoe ka sesebelisoa sa SW6.
2. Hokela li-jumpers ho kit ea ntlafatso ea RTG4, joalo ka ha ho bonts'itsoe tafoleng e latelang:
   Lethathamo la 4 • Li-Jumpers

   Jumper	Pin From	Pin To	Maikutlo
   J11, J17, J19, J23, J26, J21, J32, le J27	1	2	Ea kamehla
   J16	2	3	Ea kamehla
   J33	1	2	Ea kamehla
   	3	4

3. Hokela PC e amohelang sehokelo sa J47 u sebelisa thapo ea USB.
4. Netefatsa hore bakhanni ba borokho ba USB ho UART ba fumaneha ka bo eona. Sena se ka netefatsoa ho mookameli oa sesebelisoa sa PC e amohelang.
5. Joalokaha ho bontšitsoe setšoantšong sa 7, thepa ea boema-kepe ea COM13 e bonts'a hore e hokahane le USB Serial Converter C. Kahoo, COM13 e khethiloe ho ex ena.ample. Nomoro ea boema-kepe ba COM ke sistimi e ikhethileng.
   Setšoantšo sa 7 • Mookameli oa lisebelisoa
   Hlokomela: Haeba li-driver tsa borokho tsa USB ho UART li sa kengoa, jarolla le ho kenya li-driver ho tloha www.microsemi.com//documents/CDM_2.08.24_WHQL_Certified.zip.
6. Hokela phepelo ea motlakase ho sehokelo sa J9 ebe o bulela switch ea phepelo ea motlakase, SW6.

Setšoantšo sa 8 • RTG4 Development Kit

Ho tsamaisa Demo

Khaolo ena e hlalosa mehato ea ho hlophisa sesebelisoa sa RTG4 ka moralo oa litšupiso, ho hlophisa SPI Flash ka ts'ebeliso e shebiloeng, le ho qala ts'ebeliso ea sepheo ho tsoa mohopolong oa DDR u sebelisa Mi-V Bootloader GUI.

Ho tsamaisa demo ho kenyelletsa mehato e latelang:

1. Ho hlophisa sesebelisoa sa RTG4, leqepheng la 11
2. Ho tsamaisa Mi-V Bootloader, leqepheng la 11

Ho hlophisa sesebelisoa sa RTG4
Sesebelisoa sa RTG4 se ka hlophisoa ka ho sebelisa FlashPro Express kapa Libero SOC.

• Ho hlophisa RTG4 Development Kit ka mosebetsi file e fanoeng joalo ka karolo ea moralo files sebelisa software ea FlashPro Express, sheba Sehlomathiso sa 1: Ho Rulahanya Sesebediswa U Sebelisa FlashPro Express,leqephe la 14.
• Ho hlophisa sesebelisoa u sebelisa Libero SoC, sheba Sehlomathiso sa 2: Ho hlophisa sesebelisoa u sebelisa Libero SoC, leqepheng la 17.

Ho tsamaisa Mi-V Bootloader
Ha u phethela lenaneo ka katleho, latela mehato ena:

1. Kenya faele ea setup.exe file e fumanehang ka moralo o latelang files sebaka.
   <$Download_Directory>\rtg4_ac490_df\GUI_Installer\Mi-V Bootloader_Installer_V1.4
2. Latela wizate ea ho kenya ho kenya sesebelisoa sa Bootloader GUI.
   Setšoantšo sa 9 se bontša RTG4 Mi-V Bootloader GUI.
   Setšoantšo sa 9 • Mi-V Bootloader GUI
3. Khetha boema-kepe ba COM bo hokahaneng le USB Serial Converter C joalo ka ha ho bonts'itsoe ho Setšoantšo sa 7.
4. Tobetsa konopo ea ho hokahanya. Kamora ho hokahanya ka katleho letšoao le Lefubelu le fetoha Botala joalo ka ha ho bonts'itsoe ho Setšoantšo sa 10.
   Setšoantšo sa 10 • Hokela Boema-kepe ba COM
5. Tobetsa konopo ea Import ebe u khetha sesebelisoa seo u se batlang file (.bin). Kamora ho kenya, tsela ea ho file e bonts'oa ho GUI joalo ka ha ho bonts'itsoe ho Setšoantšo sa 11.
   <$Download_Directory>\rtg4_ac490_df\Source_files
   Setšoantšo sa 11 • Kenya Sets'oants'o sa Morero File
6. Joalo ka ha ho bonts'itsoe ho Setšoantšo sa 11, tobetsa khetho ea Program SPI Flash ho hlophisa ts'ebeliso e lebeletsoeng ho SPI Flash. Phatlalatso e hlaha ka mor'a hore SPI Flash e hlophisoe joalokaha ho bontšitsoe setšoantšong sa 12. Tobetsa OK.
   Setšoantšo sa 12 • SPI Flash E hlophisitsoeng
7. Khetha khetho ea ho Qala Boot ho kopitsa sesebelisoa ho tloha ho SPI Flash ho ea memori ea DDR3 ebe o qala ho kenya ts'ebeliso ho tsoa mohopolong oa DDR3. Kamora ho qala ts'ebeliso e atlehileng ea ts'ebeliso e lebisitsoeng mohopolong oa DDR3, sesebelisoa se hatisa melaetsa ea UART ebe se panya mosebelisi oa LED1, 2, 3, le 4 joalo ka ha ho bonts'itsoe ho Setšoantšo sa 13.
   Setšoantšo sa 13 • Phetha kopo ho tsoa ho DDR
8. Sesebelisoa se sebetsa ho tsoa mohopolong oa DDR3 mme sena se phethela demo. Koala Mi-V Bootloader GUI.

Ho hlophisa sesebelisoa u sebelisa FlashPro Express

Karolo ena e hlalosa mokhoa oa ho hlophisa sesebelisoa sa RTG4 ka mosebetsi oa ho etsa mananeo file sebelisa FlashPro Express.

Ho hlophisa sesebelisoa, etsa mehato e latelang:

1. Netefatsa hore litlhophiso tsa jumper botong li tšoana le tse thathamisitsoeng ho Lethathamo la 3 la UG0617:
   Tataiso ea mosebelisi ea RTG4 Development Kit.
2. Ka boikhethelo, jumper J32 e ka hlophisoa ho hokahanya likhoele 2-3 ha o sebelisa FlashPro4, FlashPro5, kapa FlashPro6 ea kantle ho e-na le sethala sa jumper sa kamehla ho sebelisa FlashPro5 e kenelletseng.
   Hlokomela: Sesebelisoa sa phepelo ea matla, SW6 se tlameha ho tingoa ha ho ntse ho etsoa likhokahano tsa jumper.
3. Hokela thapo ea phepelo ea matla ho sehokelo sa J9 botong.
4. Matla HO sesebelisoa sa phepelo ea motlakase SW6.
5. Haeba u sebelisa FlashPro5 e kentsoeng, hokela thapo ea USB ho sehokelo J47 le PC e amohelang.
   Ntle le moo, haeba u sebelisa sebatli sa kantle, hokela thapo ea ribone ho mohala oa JTAG hlooho J22 'me u kopanye moqapi ho PC e amohelang.
6. Ho PC e amohelang, qala software ea FlashPro Express.
7. Tobetsa e Ncha kapa khetha Morero o Mocha oa Mosebetsi ho FlashPro Express Job ho tsoa lenaneng la Morero ho theha projeke e ncha ea mosebetsi, joalo ka ha ho bonts'itsoe setšoantšong se latelang.
   Setšoantšo sa 14 • Morero oa Mosebetsi oa FlashPro Express
8. Kenya tse latelang ho Morero o Mocha oa Mosebetsi ho tsoa lebokoseng la puisano la FlashPro Express Job:
   • Mosebetsi oa mananeo file: Tobetsa Browse, 'me u tsamaee ho ea sebakeng seo .job e leng ho sona file e fumaneha ebe u khetha file. Sebaka sa kamehla ke: \rtg4_ac490_df\Programming_Job
   • Sebaka sa morero oa mosebetsi oa FlashPro Express: Tobetsa Batla 'me u tsamaise ho ea sebakeng se lakatsehang sa morero oa FlashPro Express.
     Setšoantšo sa 15 • Morero o Mocha oa Mosebetsi o tsoang ho FlashPro Express Job
9. Tobetsa OK. Lenaneo le hlokahalang file e khethiloe ebile e loketse ho hlophisoa sesebelisoa.
10. Fesetere ea FlashPro Express e hlaha joalo ka ha ho bonts'itsoe setšoantšong se latelang. Netefatsa hore nomoro ea mohlophisi e hlaha sebakeng sa Lenaneo. Haeba e sa etse joalo, netefatsa likhokahano tsa boto ebe o tobetsa Refresh/Rescan Programmers.
    Setšoantšo sa 16 • Ho hlophisa sesebelisoa
11. Tobetsa RUN. Ha sesebelisoa se hlophisoa ka katleho, boemo ba RUN PASSED bo bontšoa joalo ka ha ho bontšitsoe setšoantšong se latelang.
    Setšoantšo sa 17 • FlashPro Express-RUN PASSED
12. Koala FlashPro Express kapa tobetsa Tsoa ho tab ea Project.

Ho hlophisa sesebelisoa u sebelisa Libero SoC

Moqapi oa litšupiso files e kenyelletsa projeke ea processor ea Mi-V e entsoeng ho sebelisoa Libero SoC. Sesebelisoa sa RTG4 se ka hlophisoa ho sebelisoa Libero SoC. Morero oa Libero SoC o hahiloe ka botlalo mme o tsamaisoa ho tsoa ho Synthesis, Place le Route, netefatso ea nako, FPGA Array Data Generation, Update μPROM Memory Content, Bitstream Generation, FPGA Programming.

Phallo ea moralo oa Libero e bontšoa setšoantšong se latelang.

Setšoantšo sa 18 • Phallo ea Libero Design

Ho hlophisa sesebelisoa sa RTG4, projeke ea processor ea Mi-V e tlameha ho buloa ho Libero SoC mme mehato e latelang e tlameha ho etsoa hape:

1. Ntlafatsa litaba tsa memori ea uPROM: Mohatong ona, μPROM e hlophisitsoe ka sesebelisoa sa bootloader.
2. Bitstream Generation: Mohatong ona, Mosebetsi file e hlahisoa bakeng sa sesebelisoa sa RTG4.
3. Lenaneo la FPGA: Mohatong ona, sesebelisoa sa RTG4 se entsoe ka ho sebelisa Mosebetsi file.

Latela mehato ena:

1. Ho tsoa ho Libero Design Flow, khetha Update uPROM Memory Content.
2. Theha moreki ka ho sebelisa khetho ea Add.
3. Khetha moreki ebe u khetha khetho ea Edita.
4. Kgetha Content ho tswa ho file ebe u khetha khetho ea Browse joalokaha e bontšitsoe ho Figure 19.
   Setšoantšo sa 19 • Edita Data Storage Client
5. E ea ho moralo o latelang files ebe u khetha miv-rv32im-bootloader.hex file joalo ka ha ho bonts'itsoe ho Setšoantšo sa 20. <$Download_Directory>\rtg4_ac490_df
   • Seta File Tlanya joalo ka Intel-Hex (*.hex).
   • Khetha Sebelisa tsela e lekanyelitsoeng ho tsoa bukeng ea projeke.
   • Tobetsa OK.
     Setšoantšo sa 20 • Mohopolo o tsoang kantle File
6. Tobetsa OK.
   Litaba tsa μPROM li nchafalitsoe.
7. Penya habeli Hlahisa Bitstream joalo ka ha ho bonts'itsoe ho Setšoantšo sa 21.
   Setšoantšo sa 21 • Hlahisa Bitstream
8. Tobetsa habeli Run PROGRAM Action ho hlophisa sesebelisoa joalo ka ha ho bontšitsoe setšoantšong sa 21.
   Sesebelisoa sa RTG4 se entsoe. Sheba Ho matha Demo, leqepheng la 11.

Ho matha TCL Script

Lingoliloeng tsa TCL li fanoe ka moralo files tlas'a directory TCL_Scripts. Haeba ho hlokahala, phallo ea moralo e ka hlahisoa hape ho tloha ho Design Implementation ho fihlela tlhahiso ea mosebetsi file.

Ho tsamaisa TCL, latela mehato e ka tlase:

1. Qala software ea Libero.
2. Kgetha Morero > Phetha Sengoloa….
3. Tobetsa Batla ebe u khetha script.tcl bukeng e jarollotsoeng ea TCL_Scripts.
4. Tobetsa Matha.

Kamora ts'ebetso e atlehileng ea sengoloa sa TCL, projeke ea Libero e thehiloe ka har'a bukana ea TCL_Scripts.
Ho fumana lintlha tse ling mabapi le lingoliloeng tsa TCL, sheba rtg4_ac490_df/TCL_Scripts/readme.txt.
Sheba ho Libero® SoC TCL Command Reference Guide bakeng sa lintlha tse ling mabapi le litaelo tsa TCL. Ikopanye
Tšehetso ea Theknoloji bakeng sa lipotso leha e le life tseo u ka kopanang le tsona ha u sebelisa mongolo oa TCL.

Microsemi ha e fane ka tiisetso, boemeli, kapa tiiso mabapi le tlhahisoleseding e teng mona kapa ho lekana ha lihlahisoa le litšebeletso tsa eona bakeng sa morero ofe kapa ofe, leha e le hore Microsemi ha e nke boikarabelo leha e le bofe bo hlahang ka lebaka la kopo kapa tšebeliso ea sehlahisoa leha e le sefe kapa potoloho. Lihlahisoa tse rekisoang ka tlase mona le lihlahisoa tse ling tse rekisoang ke Microsemi li 'nile tsa lekoa ka mokhoa o lekanyelitsoeng' me ha lia lokela ho sebelisoa hammoho le lisebelisoa tsa bohlokoa tsa mosebetsi kapa likopo. Litlhaloso life kapa life tsa ts'ebetso ho lumeloa hore lia tšepahala empa ha lia netefatsoa, ​​​​'me Moreki o tlameha ho tsamaisa le ho tlatsa ts'ebetso eohle le liteko tse ling tsa lihlahisoa, a le mong, hammoho le, kapa a kentsoe, lihlahisoa life kapa life tsa ho qetela. Moreki a ke ke a itšetleha ka lintlha leha e le life le litlhaloso tsa ts'ebetso kapa litekanyetso tse fanoeng ke Microsemi. Ke boikarabello ba Moreki ho iketsetsa qeto ea hore na lihlahisoa life kapa life lia tšoaneleha le ho etsa liteko le ho netefatsa se tšoanang. Boitsebiso bo fanoeng ke Microsemi mona ka tlase bo fanoe "joalokaha bo le teng, bo hokae" le ka liphoso tsohle, 'me kotsi eohle e amanang le boitsebiso bo joalo ke ka ho feletseng le Moreki. Microsemi ha e fane, ka ho hlaka kapa ka mokhoa o hlakileng, ho mokga leha e le ofe litokelo tsa patent, li-license, kapa litokelo tse ling tsa IP, ebang ke mabapi le boitsebiso bo joalo ka boeona kapa ntho leha e le efe e hlalositsoeng ke boitsebiso bo joalo. Tlhahisoleseding e fanoeng tokomaneng ena ke ea mong'a Microsemi, 'me Microsemi e na le tokelo ea ho etsa liphetoho leha e le life tlhahisoleseding e tokomaneng ena kapa ho lihlahisoa leha e le life le litšebeletso ka nako leha e le efe ntle le tsebiso.

Mabapi le Microsemi
Microsemi, motlatsi oa ka ho feletseng oa Microchip Technology Inc. (Nasdaq: MCHP), e fana ka mosebetsi o pharaletseng oa semiconductor le mekhoa ea tsamaiso bakeng sa sebaka sa lifofane le tšireletso, puisano, setsi sa data le limmaraka tsa indasteri. Lihlahisoa li kenyelletsa li-circuits tse kopantsoeng tse sebetsang hantle le tse nang le mahlaseli a kotsi, li-FPGA, SoCs le ASIC; lihlahisoa tsa tsamaiso ea matla; lisebelisoa tsa nako le tsa ho hokahanya le litharollo tsa nako tse nepahetseng, tse behang maemo a lefats'e bakeng sa nako; lisebelisoa tsa ho sebetsana le lentsoe; RF tharollo; likarolo tse ikhethang; polokelo ea khoebo le tharollo ea likhokahano, mahlale a ts'ireletso le anti-t scalableamplihlahisoa tsa er; Litharollo tsa Ethernet; Matla-over-Ethernet ICs le midspans; hammoho le bokhoni le litšebeletso tsa moralo oa tloaelo. Ithute haholoanyane ho www.microsemi.com.

Ntlo-khōlō ea Microsemi
One Enterprise, Aliso Viejo,
CA 92656 USA
Ka hare ho USA: +1 800-713-4113
Kantle ho USA: +1 949-380-6100
Lithekiso: +1 949-380-6136
Fax: +1 949-215-4996
Lengolo-tsoibila: sales.support@microsemi.com
www.microsemi.com

©2021 Microsemi, e leng lefapha le felletseng la Microchip Technology Inc. Litokelo tsohle li sirelelitsoe. Microsemi le logo ea Microsemi ke matšoao a ngolisitsoeng a Microsemi Corporation. Matshwao a mang kaofela a kgwebo le matshwao a tshebeletso ke thepa ya beng ba ona

Litokomane / Lisebelisoa

Microsemi AC490 RTG4 FPGA: Ho Haha Setsi sa Motlakase oa Mi-V [pdf] Bukana ea Mosebelisi AC490 RTG4 FPGA Ho Haha Setsi sa Motlakase sa Mi-V, AC490 RTG4, FPGA Ho Haha Setsi sa Motlakase sa Mi-V, Setsi sa Ts'ebetso sa Mi-V

Litšupiso

• Bukana ea Mosebelisi