AEMC INSTRUMENTS 1110 Hasken Bayanan Bayanin Mai Amfani

Chauvin Arnoux®, Inc. dba AEMC® Instruments sun tabbatar da cewa an daidaita wannan kayan aiki ta amfani da ma'auni da kayan aiki da aka gano zuwa matakan duniya.

Muna ba da tabbacin cewa a lokacin jigilar kaya kayan aikinku sun cika ƙayyadaddun bayanan da aka buga.

Ana iya neman takardar shaidar ganowa ta NIST a lokacin siye, ko samu ta hanyar mayar da kayan aikin zuwa wurin gyarawa da wurin daidaitawa, don farashi na ƙima.

Shawarar tazarar daidaitawa don wannan kayan aikin shine watanni 12 kuma yana farawa akan ranar da abokin ciniki ya karɓi. Don sake daidaitawa, da fatan za a yi amfani da sabis na daidaitawa. Koma zuwa sashin gyarawa da daidaitawa a www.aemc.com.

Na gode don siyan Model Logger Data Logger 1110. Don kyakkyawan sakamako daga kayan aikin ku:

Karanta waɗannan umarnin aiki a hankali,
bi kariyar don amfani.

GARGADI, kasadar HADARI! Dole ne mai aiki ya koma ga waɗannan umarnin a duk lokacin da wannan alamar haɗari ta bayyana.
Bayani ko shawarwari masu amfani.
Baturi
Magnet
An ayyana samfurin a sake yin amfani da shi bayan nazarin yanayin rayuwarsa daidai da ma'aunin ISO14040.
AEMC ta ɗauki tsarin Eco-Design don tsara wannan kayan aikin. Binciken cikakken yanayin rayuwa ya ba mu damar sarrafawa da haɓaka tasirin samfurin akan muhalli. Musamman wannan na'urar ta zarce ka'idoji game da sake amfani da su da sake amfani da su.
Yana nuna daidaituwa tare da umarnin Turai kuma tare da ƙa'idodi da suka shafi EMC.
Yana nuna cewa, a cikin Tarayyar Turai, dole ne a yi amfani da kayan aikin da aka zaɓa don dacewa Umarnin WEEE 2002/96/EC. Wannan kayan aikin ba dole ba ne a dauki shi azaman sharar gida.

Matakan kariya

Wannan kayan aikin ya dace da ma'aunin aminci IEC 61010-2-030, don voltages har zuwa 5V dangane da ƙasa. Rashin kiyaye waɗannan umarnin aminci na iya haifar da girgiza wutar lantarki, wuta, fashewa, da lalacewa ga kayan aiki da/ko shigarwar da yake ciki.

Dole ne mai aiki da/ko mai alhakin karantawa a hankali kuma su fahimci duk matakan kariya da za a ɗauka kafin amfani da kayan aiki. Cikakken sani da sanin hatsarori na lantarki suna da mahimmanci yayin amfani da wannan kayan aikin.
Kula da yanayin amfani, gami da zafin jiki, danshi mai dangi, tsayi, digirin gurɓatawa, da wurin amfani.

Kada kayi amfani da kayan aiki idan ya bayyana lalacewa, bai cika ba, ko kuma an rufe shi da kyau.
Kafin kowane amfani, duba yanayin mahalli da na'urorin haɗi. Duk wani abu da abin rufe fuska ya lalace (ko da wani bangare) dole ne a ware shi don gyarawa ko zubarwa.

Dole ne ma'aikatan da aka amince da su su yi duk matsala da binciken awo.

Karbar Kayan Ka

Bayan karɓar jigilar kaya, tabbatar da cewa abubuwan da ke ciki sun yi daidai da lissafin tattarawa. Sanar da mai rarraba ku duk wani abu da ya ɓace. Idan kayan aikin ya bayyana sun lalace, file da'awar nan da nan tare da mai ɗauka kuma sanar da mai rarraba ku a lokaci ɗaya, ba da cikakken bayanin kowane lalacewa. Ajiye kwandon da aka lalace don tabbatar da da'awar ku.

Bayanin oda

Samfurin Logger Data Lightmeter 1110………………………………………………………………………………………….…. Cat. #2121.71
Ya haɗa da jaka mai laushi, baturan alkaline AA uku, kebul na USB ft.View® software da littafin mai amfani.

Sassan Maye gurbin:
Kebul - Sauyawa 6 ft. (1.8m) USB……………………………………………………………………………………………………………….Cat. #2138.66
Aljihu - Aljihu Mai ɗaukar Maye gurbin……………………………………………………………………………………………………………….Cat. #2118.65

Na'urorin haɗi:
Multifix Universal Hawa Tsarin …………………………………………………………………………………………………………………………………………………………. #5000.44
Adafta – US Wall Toshe zuwa USB…………………………………………………………………………………………………………………………………………………….Cat. #2153.78
Hujjojin Hulɗar Shock……………………………………………………………………………………………………………………………………………………………………… Cat. #2122.31
Don na'urorin haɗi da kayan maye, ziyarci mu web site: www.aemc.com

FARAWA

Shigar da baturi

Kayan aiki yana karɓar batura AA ko LR6 alkaline guda uku.

"Tear-drop" daraja don rataya kayan aiki
Kushin da ba skid ba
Magnets don hawa zuwa saman ƙarfe
Murfin sashin baturi

Don canza batura:

Danna shafin murfin murfin baturin kuma dauke shi a sarari.

Cire murfin ɗakin baturi.
Saka sabbin batura, yana tabbatar da daidaiton polarity.
Rufe murfin sashin baturi; tabbatar da an rufe shi gaba daya kuma daidai.

Kayan Aikin Gaban Gaba

Karkace-rauni tsawo na USB
Murfin Sensor (wanda aka kama)
Hasken haske
Magnets don tabbatar da firikwensin zuwa gidaje
Nunin LCD na baya
faifan maɓalli
Maɓallin ON / KASHE
Nau'in B micro-USB connector

Ayyukan Kayan aiki

Model 1110 yana auna haske daga 0.1 zuwa 200,000 lux. Na'urar tana auna hasken da ake iya gani kawai, kuma ya keɓance tsawon raƙuman da ba a iya gani (infrared, ultraviolet, da sauransu). Yana auna haske daidai da shawarwarin AFE (Association Française de l'Éclairage - Ƙungiyar Haskakawa ta Faransa).

Kayan aikin kuma yana auna raguwar haske akan lokaci saboda tsufa ko tushen hasken ƙura.
Model 1110 na iya:

Nuna ma'aunin haske a cikin lux (lx) ko kyandir-ƙafa (fc).
Yi rikodin mafi ƙanƙanta, matsakaici (ma'ana), da matsakaicin ma'auni a cikin ƙayyadadden lokaci.

Yi rikodin mafi ƙanƙanta/matsakaici/mafi girma don saman ko ɗaki.
Yi rikodin kuma adana ma'auni.
Sadarwa tare da kwamfuta ta Bluetooth ko kebul na USB.

BayanaiView tare da Data Logger Control Panel za a iya shigar da software a kwamfuta don ba ka damar saita kayan aiki, view ma'auni a ainihin lokacin, zazzage bayanai daga kayan aiki, da ƙirƙirar rahotanni.

Kunna / KASHE Kayan aikin

A: Danna maɓallin button don> 2 seconds.
KASHE: Danna maɓallin maɓallin don> 2 seconds lokacin da kayan aiki ke kunne. Lura cewa ba za ku iya kashe kayan aikin ba lokacin da yake cikin HOLD ko yanayin rikodi.

Idan allon hagu ya bayyana yayin farawa, ana ci gaba da yin rikodi a ƙarshen lokacin da aka kashe kayan aikin. Wannan allon yana nuna kayan aikin yana adana bayanan da aka yi rikodi.

Kar a kashe kayan aiki yayin da wannan allon yake nunawa; in ba haka ba za a rasa bayanan da aka yi rikodin.

Maɓallin Aiki

Maɓalli	Aiki
	Shortan latsa yana zaɓar nau'in tushen haske: incandescent (tsoho), mai kyalli, ko LED. (Dubi Karin Bayani §A.1.) Dogon danna (> 2 seconds) yana shiga yanayin MAP.
	Shortan latsa yana adana awo da kwanan wata a cikin ƙwaƙwalwar kayan aiki. Yanayin MAP: yana ƙara ma'auni zuwa ma'auni a cikin MAP (§3.1.3). Dogon danna yana farawa/tsaya zaman rikodi.
	Shortan latsa yana kunna hasken baya. Dogon danna maɓallai tsakanin lux (lx) da kyandir-ƙafa (fc).
	Shortan latsawa yana daskare nunin. Dogon latsa yana kunna / yana kashe Bluetooth.
MAX AVG MIN	Shortan latsa yana shiga yanayin MAX AVG MIN (§3.1.2); Ana ci gaba da nuna ƙimar ma'auni. Latsa na biyu yana nuna matsakaicin ƙimar. Latsa na uku yana nuna matsakaicin ƙima. Latsa na huɗu yana nuna ƙaramin ƙima. Latsa na biyar ya dawo zuwa aikin aunawa na yau da kullun. Dogon latsa yana fita daga yanayin MAX AVG MIN. A yanayin MAP, latsa nuni bi da bi matsakaicin, matsakaita (ma'ana), da mafi ƙarancin ma'aunin MAP.

Nunawa

MAP aiki counter
Babban nuni

OL yana nuna ma'aunin yana wajen iyakokin kayan aiki (mai kyau ko mara kyau). yana nuna an kashe Auto Off. Wannan yana faruwa lokacin da kayan aikin shine:

Yin rikodi, a yanayin MAX AVG MIN, a yanayin MAP, ko a yanayin HOLD

Haɗa ta kebul na USB ko dai zuwa wutar lantarki ta waje ko don sadarwa tare da kwamfuta
Sadarwa ta Bluetooth
Saita zuwa KASHE ta atomatik (duba §2.4)

SATA

Kafin amfani da kayan aikin ku, dole ne ku saita kwanan wata da lokacinta ta DataView (duba §2.3). Sauran ayyukan saitin asali sun haɗa da zaɓi:

Tazarar KASHE ta atomatik (yana buƙatar BayanaiView)
lx ko fc don raka'a ma'auni (ana iya yin su akan kayan aiki ko ta DataView)
Nau'in tushen haske (ana iya yin shi akan kayan aiki ko ta DataView)

BayanaiView Shigarwa

Saka kebul na USB wanda ya zo tare da kayan aiki a cikin tashar USB akan kwamfutarka.
Idan an kunna Autorun, taga AutoPlay yana bayyana akan allonku. Danna "Buɗe babban fayil zuwa view files" don nuna bayananView babban fayil. Idan ba a kunna Autorun ko ba a yarda ba, yi amfani da Windows Explorer don gano wuri da buɗe kebul ɗin kebul ɗin mai lakabin “DataView.”
Lokacin DataView babban fayil yana buɗe, nemo file Setup.exe kuma danna sau biyu.
Allon saitin yana bayyana. Wannan yana ba ku damar zaɓar nau'in Bayanai na harsheView don shigarwa. Hakanan zaka iya zaɓar ƙarin zaɓuɓɓukan shigarwa (an yi bayanin kowane zaɓi a cikin filin Bayani). Yi zaɓinku kuma danna Shigar.
Allon Wizard InstallShield yana bayyana. Wannan shirin yana jagorantar ku ta hanyar DataView shigar da tsari. Yayin da kake kammala waɗannan allon, tabbatar da duba Data Loggers lokacin da aka sa ka zaɓi fasalulluka don shigarwa.
Lokacin da InstallShield Wizard ya gama shigar da DataView, allon saiti ya bayyana. Danna Fita don rufewa. BayananView babban fayil yana bayyana akan tebur ɗin kwamfutarka.

Haɗa Kayan aiki zuwa Kwamfuta

Kuna iya haɗa kayan aikin zuwa kwamfuta ta hanyar kebul na USB (wanda aka samar da kayan aiki) ko
Bluetooth®. Matakan farko guda biyu na hanyar haɗin sun dogara da nau'in haɗin kai:

USB:

Haɗa kayan aikin zuwa tashar USB da ake samuwa ta amfani da kebul ɗin da aka kawo.
Kunna kayan aiki. Idan wannan shine karo na farko da aka haɗa wannan kayan aikin zuwa wannan kwamfutar, da
za a shigar da direbobi. Jira shigarwar direba don gamawa kafin ci gaba da mataki na 3 a ƙasa.

Bluetooth:
Haɗin kayan aikin ta Bluetooth yana buƙatar Bluegiga BLED112 Smart Dongle (sayar da ita daban) shigar a cikin kwamfutarka. Lokacin da aka shigar da dongle, yi abubuwa masu zuwa:

Kunna kayan aiki ta latsa maɓallin maballin.
Kunna Bluetooth akan kayan aiki ta latsa maɓallin button har zuwa Alamar tana bayyana a cikin LCD.
Bayan an haɗa kebul na USB ko an kunna Bluetooth, ci gaba kamar haka:
Bude DataView babban fayil akan tebur ɗinku. Wannan yana nuna jerin gumakan da aka shigar tare da BayanaiView.
Bude DataView Cibiyar Kula da Logger Data ta danna maɓallin ikon.
A cikin mashaya menu a saman allon, zaɓi Taimako. A cikin menu mai saukarwa da ya bayyana, danna zaɓin Taimakon Taimako. Wannan yana buɗe tsarin Taimakon Taimakon Gudanar da Logger Data.
Yi amfani da taga abubuwan da ke ciki a tsarin Taimako don gano wuri da buɗe taken "Haɗa zuwa Kayan aiki." Wannan yana ba da umarnin bayanin yadda ake haɗa kayan aikin ku zuwa kwamfutar.
Lokacin da aka haɗa kayan aikin, sunanta yana bayyana a cikin babban fayil ɗin Data Logger Network a gefen hagu na Control Panel. Alamar rajistan koren yana bayyana kusa da sunan da ke nuna an haɗa shi a halin yanzu.

Kwanan wata/Lokacin Kayan aiki

Zaɓi kayan aikin a cikin Cibiyar Sadarwar Bayanai.
A cikin mashaya menu, zaɓi Kayan aiki. A cikin menu mai saukewa wanda ya bayyana, danna Saita Clock.

Akwatin maganganu na Kwanan wata/Lokaci ya bayyana. Kammala filayen cikin wannan akwatin maganganu. Idan kuna buƙatar taimako, danna F1.
Lokacin da kuka gama saita kwanan wata da lokaci, danna Ok don adana canje-canjenku zuwa kayan aikin.

KASHE KANKA

Ta hanyar tsoho, kayan aikin yana kashe ta atomatik bayan mintuna 3 na rashin aiki. Kuna iya amfani da Data Logger
Ƙungiyar Sarrafa don canza tazarar KASHE ta atomatik, ko kashe wannan fasalin, kamar yadda Taimakon da ke zuwa tare da software ya umarta.

Lokacin da aka kashe ta atomatik, alamar ya bayyana a allon LCD na kayan aiki.

Raka'a Ma'auni

The maɓalli akan gaban kayan aikin yana ba ku damar juyawa tsakanin lx (lux) da fc (kyandir-kyandir) don raka'o'in aunawa. Hakanan zaka iya saita wannan ta Cibiyar Kula da Logger Data.

Nau'in Tushen Haske

The maɓallin kewayawa ta hanyar zaɓuɓɓukan tushen haske guda uku da aka samo (incandescent, fluorescent, ko LED). Hakanan zaka iya saita wannan ta Cibiyar Kula da Logger Data.

AIKI TSAYE

Na'urorin na iya aiki ta hanyoyi biyu:

Yanayin tsaye, wanda aka kwatanta a wannan sashe
Yanayin nesa, wanda kwamfutar ke sarrafa kayan aikin ta hanyar sarrafa bayanaiView (duba §4)

Yin Ma'auni

Cire hular da ke kare firikwensin.
Sanya firikwensin a wurin da za a auna, tabbatar da cewa ba ku sanya kanku tsakanin firikwensin da tushen haske (s).
Idan kayan aikin ya KASHE, danna ka riƙe ƙasa button har sai ya kunna. Kayan aiki yana nuna lokacin yanzu, sannan aunawa ya biyo baya.

Don canja raka'a na ma'auni, dogon latsa maɓallin maballin. Kayan aikin zai ci gaba da amfani da wannan naúrar idan an kunna na gaba.
Don ajiye ma'auni zuwa ƙwaƙwalwar kayan aiki, danna maɓallin maballin.

Lura cewa za ku iya yin ƙananan ma'aunin haske nan da nan bayan babban ma'aunin haske; babu jinkiri tsakanin ma'auni da ake buƙata.

Koma zuwa Karin Bayani §A.2 don ƙimar haske gama gari

Riƙe Aiki
Danna maɓallin HOLD yana daskare nunin. Latsawa ta biyu ta buɗe shi.

MAX AVG MIN Aiki
Kuna iya saka idanu matsakaicin, ƙarami, da matsakaicin ma'auni ta latsa maɓallin maballin. Wannan yana nuna kalmomin MIN/AVG/MAX a saman nunin (duba ƙasa). A cikin wannan yanayin, danna da zarar yana nuna matsakaicin ƙimar da aka auna yayin zaman na yanzu. Latsa na biyu yana nuna matsakaicin ƙima, kuma na uku yana nuna ƙarami. A ƙarshe latsa na huɗu yana dawo da nuni na yau da kullun. Matsaloli na gaba na maimaita wannan sake zagayowar.

Don fita yanayin MAX AVG MIN, dogon latsa . Lura cewa lokacin da yanayin MAX AVG MIN ke aiki, aikin MAP yana kashewa.

Ayyukan MAP

Ayyukan MAP yana ba ku damar yin taswirar hasken don sarari ko fili mai girma biyu. Don misaliampHar ila yau, a yanayin MAP zaka iya auna hasken a takamaiman wurare a cikin daki. Sannan zaku iya saukar da rikodin zuwa kwamfutar da ke aiki da DataView, da kuma nuna ma'auni azaman matrix mai girma 2, ƙirƙirar "taswirar" haske a cikin ɗakin.

Kafin yin taswirar yanki, yana da kyau a yi aiki don ƙirƙirar ginshiƙi mai gano inda za a yi ma'auni. Misali, misalai na gaba sune exampma'aunin ma'auni don ɗakuna biyu daban-daban.

A cikin misalan da suka gabata, wuraren launin toka suna wakiltar tushen haske (kamar fitilu ko tagogi) kuma jajayen da'irar suna wakiltar wuraren aunawa. Bincika §4.4 a cikin daidaitaccen NF EN 12464-1 don jagora lokacin ƙirƙirar taswirar taswira mai haske. Don ƙirƙirar taswira tare da Model 1110:

Danna maɓallin MAP na tsawon daƙiƙa 2 don shigar da yanayin MAP. Za a fara saita ma'auni akan LCD ɗin zuwa 00
(duba ƙasa).
Sanya firikwensin a ma'aunin farko kuma latsa MEM don yin rikodin ƙima a ƙwaƙwalwar ajiya. Ana ƙara ƙima.
Maimaita mataki na 2 don duk sauran wuraren ma'auni da za a yi taswira.

Lokacin da aka gama, danna MAP don> 2 seconds don fita yanayin MAP.

Lura cewa yayin da ke cikin yanayin MAP, zaku iya amfani da maɓallin don zagayawa cikin matsakaicin matsakaici, matsakaici, da ƙaramin ma'aunin da aka yi yayin zaman taswira.

Kowane ma'auni da aka yi yayin zama ana adana shi a cikin MAP guda ɗaya file. Kuna iya sauke wannan file zuwa kwamfuta mai sarrafa DataView, kuma nuna shi azaman matrix fari-launin toka-baki mai girma 2. BayananView Tsarin Taimako na Kwamitin Kula da Logger Data yana bayanin yadda ake yin wannan (duba kuma §4).

Ma'aunin Rikodi

Kuna iya farawa da dakatar da zaman rikodi akan kayan aiki. Ana adana bayanan da aka yi rikodi a cikin ƙwaƙwalwar kayan aiki, kuma ana iya saukewa kuma viewed a kan kwamfutar da ke gudanar da DataView Kwamitin Kula da Logger Data.

Kuna iya rikodin bayanai ta danna maɓallin maballin:

Wani ɗan gajeren latsa (MEM) yana rikodin ma'aunin (s) na yanzu da kwanan wata.
Dogon latsa (REC) yana fara zaman rikodi. Yayin da ake yin rikodi, alamar REC tana bayyana a saman nunin. Dogon latsa na biyu na yana dakatar da zaman rikodi. Lura cewa yayin da kayan aiki ke yin rikodi, ɗan gajeren latsa na ba shi da tasiri.

Don tsara lokutan rikodi, da zazzagewa da view rubuta bayanai, duba DataView Taimakon Taimakon Ƙimar Logger Data.

Kurakurai
Kayan aiki yana gano kurakurai kuma yana nuna su a cikin tsari Er.XX:

Er.01 An gano rashin aikin hardware. Dole ne a aika da kayan aiki don gyarawa.
Er.02 Kuskuren ƙwaƙwalwar ajiya na ciki. Haɗa kayan aikin zuwa kwamfuta ta kebul na USB kuma tsara ƙwaƙwalwar ajiyar ta ta amfani da Windows.
Er.03 An gano rashin aikin hardware. Dole ne a aika da kayan aiki don gyarawa.
Er.10 Ba a daidaita kayan aikin daidai ba. Dole ne a aika kayan aiki zuwa sabis na abokin ciniki.
Er.11 Firmware bai dace da kayan aiki ba. Sanya firmware daidai (duba §6.4).
Er.12 Sigar firmware bai dace da kayan aiki ba. Sake shigar da sigar firmware ta baya.
Er.13 Kuskuren tsara rikodi. Tabbatar cewa lokacin kayan aiki da lokacin BayananView Kwamitin Kula da Logger Data iri ɗaya ne (duba §2.3).

DATAVIEW

Kamar yadda aka bayyana a cikin §2, DataView ana buƙatar aiwatar da ayyuka na saitin asali da yawa waɗanda suka haɗa da haɗa kayan aikin zuwa kwamfuta, saita lokaci da kwanan wata akan kayan aikin, da canza saitin KASHE Auto. Bugu da kari, DataView ba ka damar:

Sanya da tsara zaman rikodi akan kayan aiki.
Zazzage bayanan da aka yi rikodi daga kayan aiki zuwa kwamfuta.
Ƙirƙirar rahotanni daga bayanan da aka sauke.
View ma'aunin kayan aiki a ainihin lokacin akan kwamfutar.

Don bayani game da yin waɗannan ayyuka, tuntuɓi BayananView Taimakon Taimakon Ƙimar Logger Data.

HALAYEN FASAHA

Yanayin Nuna

Yawan tasiri	Abubuwan bincike
Zazzabi	73 ± 3.6°F (23 ± 2°C)
Dangi zafi	45% zuwa 75%
Ƙarar voltage	3 zuwa 4.5v
Madogarar haske	Wuta (haske A)
Wurin lantarki	<1V/m
Filin maganadisu	<40A/m

Rashin tabbas na ciki shine kuskuren da aka ƙayyade don yanayin tunani.

Ƙididdiga na gani
Model 1110 shine mitar haske ajin C a kowane daidaitaccen NF C-42-710. Na'urar firikwensin sa shine silicon (Si) photodiode wanda a cikinsa ake gyara martanin bakan ta hanyar tacewa na gani. Ana tabbatar da martanin jagora ta hanyar ruwan tabarau mai yaduwa.

Ma'aunin Haske

Ƙayyadaddun kewayon aunawa	0.1 zuwa 200,000lx				0.01 zuwa 18,580fc
Ƙaddamarwa	0.1 zuwa 999.9lx	1.000 zuwa 9.999 kx	10.00 zuwa 99.99 klx	100.0 zuwa 200.0 klx	0.01 zuwa 99.99fc	100.0 zuwa 999.9fc	1.000 zuwa 9.999kfc	10.00 zuwa 18.58kfc
Ƙaddamarwa	0.1lx	1lx	10lx	100lx	0.01fc	0.1fc	1fc	10fc
Rashin tabbas na ciki (auna haske)	3% na karatu
Rashin tabbas na ciki (amsa na gani dangane da V(l))	f₁<20%
Hankalin jagora	f₂ <1.5%
Rashin tabbas na ciki (daidaitacce)	f₃ <0.5%

Sauran Ƙimar gani

Hankali ga UV	U <0.05% (aji A)
Hankali ga IR	R <0.005% (aji A)
Amsa ta jagora	f₂ <1.5% (aji B) F₂ <3% (aji C)
Gajiya, tasirin ƙwaƙwalwar ajiya	f₅ + f₁₂ <0.5% (aji A)
Tasirin yanayin zafi	f₆ = 0.05%/°C (class A)
Martani ga hasken da aka daidaita	f₇ (100 Hz) = Tasiri mara kyau
Martani ga polarization	f₈ (e) = 0.3%
Lokacin amsawa	1s

Hannun Response Curve V(λ)

Hasken da ake iya gani shine hasken lantarki na lantarki tare da tsawon tsayi tsakanin 380nm da 780nm. IEC (Hukumar Fasaha ta Duniya ta kasa da kasa) ta ayyana yanayin martanin ido a matsayin aikin tsayin igiyar ruwa. Wannan shine lanƙwan V(λ), ko dangi mai haske mai haske don ganin hangen nesa (hangen rana).

Ingantacciyar ingantacciyar haske:

Kuskuren da ke kan mayar da martani na firikwensin daidai yake da yanki na bambance-bambancen tsakanin madaidaicin V (λ) da lanƙwasa na firikwensin.

Bambancin Dangane da Nau'in Tushen Haske
Model 1110 yana ba da diyya guda uku:

Lantarki (tsoho)
LED
FLUO (Fluorescent)

Diyya ta LED don aunawa akan LEDs a 4000K. Rashin tabbas a cikin wannan yanayin shine 4%. Idan ana amfani da wannan diyya don wasu LEDs, kuskuren na ciki yana ƙaruwa kamar yadda aka nuna a cikin tebur mai zuwa.

Rayya ta FLUO don ma'auni ne akan nau'in tushen F11 mai kyalli. Rashin tabbas a cikin wannan yanayin shine 4%. Idan ana amfani da wannan ramuwa don wasu tushe mai kyalli, kuskuren na ciki yana ƙaruwa kamar yadda aka nuna a ƙasa.

Yawan adadin tasiri	Yawan tasiri	Yawan tasiri	Tasiri
Nau'in tushen haske	LED 3000 zuwa 6000K	Haske	Rashin tabbas ya karu da kashi 3% (don jimlar 6%)
Nau'in tushen haske	Fluorescent na iri F1 zuwa f12	Haske	Rashin tabbas ya karu da kashi 6% (don jimlar 9%)

Duba Karin bayani §A.1 don jadawali rarraba hasken tushen haske.

Ƙwaƙwalwar ajiya

Na'urar tana da 8MB na ƙwaƙwalwar walƙiya, wanda ya isa don yin rikodi da adana ma'auni miliyan. Kowane rikodin ya ƙunshi ƙimar auna, kwanan wata da lokaci, da naúrar ma'auni.

USB

Protocol: USB Mass Adana
Matsakaicin saurin watsawa: 12 Mbit/s Nau'in B micro-USB connector

Bluetooth

Bluetooth 4.0 BLE
Range 32' (10m) na yau da kullun kuma har zuwa 100' (30m) a layin gani.
Ƙarfin fitarwa: +0 zuwa -23dBm
Mahimmancin ƙima: -93dBm
Matsakaicin adadin canja wuri: 10 kbits/s
Matsakaicin amfani: 3.3µA zuwa 3.3V.

Tushen wutan lantarki

Ana yin amfani da kayan aikin ta batirin alkaline 1.5V LR6 ko AA uku. Kuna iya maye gurbin batura tare da batura NiMH masu caji na girman iri ɗaya. Duk da haka, ko da lokacin da batura masu caji suka cika, ba za su kai ga voltage na batirin alkaline, kuma alamar baturi zai bayyana azaman or.

Voltage don daidaitaccen aiki shine 3 zuwa 4.5V don batir alkaline da 3.6V don batura masu caji. A ƙasan 3V, kayan aikin yana daina ɗaukar awo kuma yana nuna saƙon BAT Rayuwar baturi (tare da kashe haɗin Bluetooth) shine:

Yanayin jiran aiki: 500 hours
Yanayin rikodi: shekaru 3 akan ƙimar ma'auni ɗaya kowane minti 15

Hakanan ana iya kunna kayan aikin ta hanyar kebul-micro na USB, wanda aka haɗa da komfuta ko adaftar hanyar bango.

Yanayin Muhalli

Don amfani a ciki da waje.

Kewayon Aiki: +14 zuwa +140°F (-10 zuwa 60°C) da 10 zuwa 90% RH ba tare da tari ba.
Kewayon ajiya: -4 zuwa +158°F (-20 zuwa +70°C) da 10 zuwa 95% RH ba tare da tari ba, ba tare da batura ba.

Tsayi: <6562' (2000m), da 32,808' (10,000m) a cikin ajiya
Matsayin gurɓatawa: 2

Ƙayyadaddun Makanikai

Girma (L x W x H):

Gida: 5.9 x 2.8 x 1.26" (150 x 72 x 32mm)
Sensor: 2.6 x 2.5 x 1.38" (67 x 64 x 35mm) tare da hular kariya
Kebul mai rauni: 9.4 zuwa 47.2” (24 zuwa 120cm)

Mass: 12.2oz (345g) kimanin.
Kariyar inrush: IP 50, tare da haɗin kebul na rufe da hular kariya akan firikwensin, ta IEC 60.529.
Gwajin tasirin jurewa: 3.2' (1m) a kowace IEC 61010-1.

Yarda da Ka'idodin Duniya

Kayan aikin ya dace da daidaitaccen IEC 61010-1.

Daidaitawar Electromagnetic (CEM)

Kayan aikin ya dace da daidaitaccen IEC 61326-1

KIYAWA

Sai dai batura, kayan aikin ba su ƙunshi sassan da za a iya maye gurbinsu da ma'aikatan da ba a ba su horo na musamman ba kuma ba su da izini ba. Duk wani gyara mara izini ko maye gurbin sashe da "daidai" na iya cutar da aminci sosai.

Tsaftacewa

Cire haɗin kayan aiki daga duk na'urori masu auna firikwensin, kebul, da sauransu kuma kashe shi.
Yi amfani da yadi mai laushi, dampcike da ruwan sabulu. Kurkura da tallaamp yadi da bushewa da sauri tare da busasshiyar kyalle ko iska ta tilastawa.
Kada a yi amfani da barasa, abubuwan kaushi, ko hydrocarbons.

Kulawa

Sanya hular kariya akan firikwensin lokacin da ba a amfani da kayan aiki.

Ajiye kayan aiki a wuri mai bushe kuma a yawan zafin jiki.

Madadin Baturi

The alamar tana nuna ragowar rayuwar baturi. Lokacin da Alamar fanko ce, duk batura dole ne a maye gurbinsu (duba §1.1)

Kar a ɗauki batir ɗin da aka kashe a matsayin sharar gida na yau da kullun. Kai su zuwa wurin da ya dace na sake yin amfani da su.

Sabunta Firmware

AEMC na iya sabunta firmware na kayan aiki lokaci-lokaci. Ana samun sabuntawa don saukewa kyauta. Don bincika sabuntawa:

Haɗa kayan aikin zuwa Cibiyar Kula da Logger Data.
Danna Taimako.
Danna Sabuntawa. Idan na'urar tana gudanar da sabuwar firmware, saƙo yana bayyana yana sanar da ku wannan. Idan akwai sabuntawa, shafin AEMC Zazzage yana buɗewa ta atomatik. Bi umarnin da aka jera akan wannan shafin don zazzage sabuntawar.

Bayan sabunta firmware, yana iya zama dole don sake saita kayan aikin (duba §2).

RATAYE

Rarraba Spectral na Tushen Haske

Kayan aikin yana auna nau'ikan tushen haske guda uku:

na halitta ko incandescent (an bayyana a matsayin "haske A" ta misali NF C-42-710)
bututu mai kyalli tare da kunkuntar makada guda uku, ko F11
LEDs a 4000K

Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙwararrun Ƙwararrun Ƙwararru

Rarraba Spectral Haske (F11).

Rarraba Spectral LED

Ƙimar Haske

Duk duhu 0lx
Waje da dare 2 zuwa 20lx
Production shuka ba tare da manual aiki 50lx
Wuraren wucewa, matakalai da tituna, ɗakunan ajiya 100lx
Dock da loading wuraren 150lx
Canje-canje da dakuna, cafeteria, da wuraren tsafta 200lx
Gudanarwa, marufi, da aika wuraren 300lx
Dakunan taro da taro, rubutu, karanta 500lx
Tsarin masana'antu 750lx
Dakin aiki, madaidaicin injiniyoyi 1000lx
Lantarki bitar, cak na launuka 1500lx
Teburin aiki 10,000lx
Waje, gajimare 5000 zuwa 20,000lx
A waje, sararin sama 7000 zuwa 24,000lx
Waje, hasken rana kai tsaye, bazara 100,000lx

GYARA DA KYAUTA

Don tabbatar da cewa kayan aikinku sun cika ƙayyadaddun bayanai na masana'anta, muna ba da shawarar cewa a tsara za a mayar da shi zuwa Cibiyar Sabis ɗin masana'anta a cikin tazarar shekara ɗaya don sake daidaitawa, ko kamar yadda wasu ƙa'idodi ko hanyoyin ciki suka buƙata.

Don gyara kayan aiki da daidaitawa:

Dole ne ku tuntuɓi Cibiyar Sabis ɗinmu don Lambar Izinin Sabis na Abokin Ciniki (CSA#). Wannan zai tabbatar da cewa lokacin da kayan aikin ku ya zo, za a bi diddigin su kuma a sarrafa su da sauri. Da fatan za a rubuta CSA# a wajen kwandon jigilar kaya. Idan an dawo da kayan aikin don daidaitawa, muna buƙatar sanin idan kuna son daidaitaccen gyare-gyare ko abin da za a iya ganowa zuwa NIST (Ya haɗa da takardar shaidar daidaitawa da bayanan daidaitawa rikodi).

Don Arewa / Tsakiya / Kudancin Amurka, Ostiraliya da New Zealand:

Jirgin zuwa: Chauvin Arnoux®, Inc. dba AEMC® Instruments
15 Faraday Drive • Dover, NH 03820 USA
Waya: 800-945-2362 (Fitowa ta 360)
603-749-6434 (Fitowa ta 360)
Fax: 603-742-2346 • 603-749-6309
Imel: gyara@aemc.com

(Ko tuntuɓi mai rarraba ku mai izini.)

Ana samun farashi don gyarawa, daidaitaccen daidaitawa, da daidaitawa da ake iya ganowa ga NIST.

NOTE: Dole ne ku sami CSA# kafin dawo da kowane kayan aiki.

TAIMAKON FASAHA DA SALLAH

Idan kuna fuskantar kowace matsala ta fasaha, ko buƙatar kowane taimako tare da ingantaccen aiki ko aikace-aikacen kayan aikin ku, da fatan za a kira, fax, ko imel ɗin ƙungiyar tallafin fasahar mu:

Tuntuɓar: Chauvin Arnoux®, Inc. dba AEMC® Instruments
Waya: 800-945-2362 (Fitowa ta 351) • 603-749-6434 (Fitowa ta 351)
Fax: 603-742-2346
Imel: techsupport@aemc.com

GARANTI MAI KYAU

Kayan aikin AEMC ɗin ku yana da garanti ga mai shi na tsawon shekaru biyu daga ranar siyan asali na asali akan lahani a cikin kera. An bayar da wannan garanti mai iyaka ta AEMC® Instruments, ba ta mai rarrabawa daga wanda aka saya ba. Wannan garantin ya ɓace idan naúrar ta kasance tampan daidaita shi tare da, zagi, ko kuma idan lahanin yana da alaƙa da sabis ɗin da AEMC® Instruments bai yi ba.

Ana samun cikakken kewayon garanti da rajistar samfur akan mu websaiti a: www.aemc.com/warranty.html.

Da fatan za a buga bayanan Garanti na kan layi don bayananku.

Abin da AEMC® Instruments zai yi:

Idan rashin aiki ya faru a cikin shekaru biyu, kuna iya dawo mana da kayan aikin don gyarawa, muddin muna da bayanan rajistar garantin ku. file ko hujjar sayayya. AEMC® Instruments zai, a zaɓinsa, gyara ko maye gurbin abin da bai dace ba.

Garanti Gyaran

Abin da dole ne ku yi don dawo da Kayan aiki don Gyara Garanti:

Da farko, nemi Lambar Izinin Sabis na Abokin Ciniki (CSA#) ta waya ko ta fax daga Sashen Sabis ɗinmu (duba adireshin ƙasa), sannan mayar da kayan aiki tare da Fom ɗin CSA da aka sa hannu. Da fatan za a rubuta CSA# a wajen kwandon jigilar kaya. Koma kayan aiki, postage ko jigilar kaya an riga an biya zuwa:

Tsanaki: Don kare kanku daga hasarar hanyar wucewa, muna ba da shawarar ku tabbatar da kayan da aka dawo dasu.