YENZA i-TPMS yeModyuli yokuSebenza 
Inkqubo yoMsebenzisi weSixhobo seNkqubo

*Qaphela: Imifanekiso eboniswe apha yenzelwe injongo yereferensi kuphela. Ngenxa yophuculo oluqhubekayo, imveliso eyiyo inokwahluka kancinane kwimveliso echazwe apha kwaye le ncwadana yemigaqo ingatshintsha ngaphandle kwesaziso.

ImiGaqo yoKhuseleko

Funda zonke izilumkiso kunye nemiyalelo yokhuseleko.
Ukungaphumeleli ukuthobela ezi zilumkiso kunye nemiyalelo kunokubangela ukothuka kombane, umlilo kunye/okanye ukwenzakala okumandundu.

Gcina zonke izilumkiso zokhuseleko kunye nemiyalelo kwikamva.

• Akukho malungu anokusetyenziswa ngumsebenzisi. Yenza isixhobo sinikwe inkonzo ngumntu oqeqeshiweyo wokulungisa esebenzisa iindawo ezifanayo kuphela. Oku kuya kuqinisekisa ukuba ukhuseleko lwesixhobo luyagcinwa. Ukuqhawula isixhobo kuya kuphelisa ilungelo lewaranti.
• ISILUMKO: Esi sixhobo sinebhetri yangaphakathi yeLithium Polymer. Ibhetri inokuqhuma okanye iqhume, ikhuphe iikhemikhali ezinobungozi. Ukunciphisa ingozi yomlilo okanye yokutsha, musa ukuyiqhawula, ukuyityumza, ukuyigqobhoza okanye ukuyilahla ibhetri emlilweni okanye emanzini.
  Le mveliso ayiyonto yokudlala. Ungavumeli abantwana badlale kunye okanye kufutshane nale nto.
• Musa ukusibeka esichengeni isixhobo emvuleni okanye kwiimeko ezimanzi.
  Musa ukubeka isixhobo kuwo nawuphi na umgangatho ongazinzanga.
• Ungaze ushiye isixhobo singajongwanga ngexesha lenkqubo yokutshaja. Isixhobo kufuneka sibekwe kwindawo engatshiyo ngexesha lokutshaja.
• Phatha isixhobo ngononophelo. Ukuba isixhobo silahliwe, jonga ukophuka kunye nazo naziphi na ezinye iimeko ezichaphazela ukusebenza kwaso.
  Beka iibhloko phambi kwamavili okuqhuba kwaye ungaze usishiye isithuthi singajongwanga ngelixa uvavanywa.
• Musa ukusebenzisa isixhobo kwindawo eneziqhushumbisi, njengendawo yolwelo olunokutsha, iigesi, okanye uthuli olunzima.
• Gcina isixhobo somile, sicocekile, singenawo ioli, amanzi okanye igrisi. Sebenzisa isicoci esiphakathi kwilaphu elicocekileyo ukucoca umphandle wesixhobo xa kuyimfuneko.
• Abantu abanezincedisi-ntliziyo kufuneka badibane nogqirha (noogqirha) babo phambi kokuba bazisebenzise. Imimandla ye-electromagnetic ekufutshane nentliziyo ye-pacemaker inokubangela ukuphazamiseka kwe-pacemaker okanye ukusilela kwe-pacemaker.
• Sebenzisa isixhobo kuphela ngesixhobo esithile sokuxilonga esiza silayishwe imodyuli ye-TPMS kunye ne-smartphone ye-Android efakwe nge-i-TPMS app.
• Musa ukufaka ii-sensor ze-TPMS ezicwangcisiweyo kumavili awonakeleyo.
  Ngelixa udwelisa inkqubo yoluvo, musa ukubeka isixhobo kufutshane nabenzi boluvo abaninzi ngaxeshanye, nto leyo enokubangela ukusilela kwenkqubo.
• Izilumkiso, izilumkiso, kunye nemiyalelo ekuxoxwe ngayo kule ncwadana yemiyalelo ayinakuquka zonke iimeko ezinokwenzeka kunye neemeko ezinokuthi zenzeke. Kufuneka kuqondwe ngumqhubi ukuba ingqiqo kunye nokulumkisa zizinto ezingenakwakhiwa kule mveliso, kodwa kufuneka zinikezelwe ngumqhubi.

Ingxelo yeFCC

Qaphela: Naluphi na utshintsho okanye uhlengahlengiso olungavunyelwanga ngokucacileyo liqela elinoxanduva lokuthobela linokulonakalisa igunya lomsebenzisi lokusebenzisa izixhobo.
Esi sixhobo sivavanyiwe saza safunyanwa ukuba sithobela imida yesixhobo sedijithali soDidi B, ngokungqinelana nenxalenye ye-15 yeMithetho yeFCC. Le mida yenzelwe ukubonelela ngokhuseleko olufanelekileyo ekuphazamisekeni okuyingozi kwindawo yokuhlala.
Esi sixhobo sivelisa ukusetyenziswa kwaye sinokusasaza amandla amaza erediyo kwaye, ukuba asifakanga kwaye sisetyenziswe ngokuhambelana nemiyalelo, sinokubangela uphazamiseko oluyingozi kunxibelelwano lwerediyo.
Nangona kunjalo, akukho siqinisekiso sokuba ukuphazamiseka akuyi kwenzeka kufakelo oluthile. Ukuba esi sixhobo sibangela uphazamiseko oluyingozi kunomathotholo okanye ulwamkelo lukamabonakude, olunokumiselwa ngokucinywa nokulayita isixhobo, umsebenzisi uyakhuthazwa ukuba azame ukulungisa uphazamiseko ngenye okanye ngaphezulu kwezi ndlela zilandelayo:

• Jongisa kwakhona okanye uhambise i-eriyali efumanayo.
• Yandisa ukwahlukana phakathi kwesixhobo kunye nomamkeli.
• Qhagamshela izixhobo kwindawo yokuphuma kwisekethe eyahlukileyo kuleyo apho umamkeli aqhagamshelwe khona.
• Dibana nomthengisi okanye igcisa likanomathotholo/kumabonakude ukuze ufumane uncedo.

Esi sixhobo sithobela inxalenye ye-15 yeMithetho yeFCC. Ukusebenza kuxhomekeke kwezi meko zimbini zilandelayo: (1) Esi sixhobo asinakubanga luphazamiseko luyingozi, kwaye (2) esi sixhobo kufuneka samkele naluphi na uphazamiseko olufunyenweyo, kubandakanywa uphazamiseko olunokubangela usetyenziso olungafunekiyo.

Amacandelo & noLawulo

i-TPMS yi TPMS yobungcali (Tire Pressure Monitoring System) isixhobo inkonzo. Inokusebenza kunye nesixhobo esithile sokuxilonga okanye i-smartphone (idinga ukulayishwa nge-iTPMS app) ukwenza imisebenzi eyahlukeneyo ye-TPMS.

1. Ukutshaja i-LED
   Ubomvu kuthetha ukuTshaja; Uhlaza luthetha Ukuhlawuliswa ngokupheleleyo.
   
2. Iqhosha le-UP
3. PHANTSI Iqhosha
4. Ukutshaja izibuko
5. Isikhala soluvo
   Faka isivamvo kule slot ukuze uyivule kwaye uyicwangcise.
   
6. Isikrini sokubonisa
7. AMANDLA Iqhosha
   Vula/cima isixhobo.
8. Kulungile (Qinisekisa) Iqhosha

 

Iiparamitha zobuGcisa

Isikrini: 1. 77 intshi
Igalelo voltage: DC 5V
Ubungakanani: 205 * 57 * 25.5mm
Ubushushu bokusebenza: -10°C-50°C
Ubushushu bokugcina: -20 ° C -60 ° C

Isincedisi siBandakanyiwe

Ngelixa uvula ipakethe okokuqala, nceda ujonge ngononophelo amacandelo alandelayo. Izixhobo eziqhelekileyo ziyafana, kodwa kwiindawo ezahlukeneyo, izixhobo zinokwahluka. Nceda uqhagamshelane nomthengisi.

UmGaqo wokuSebenza

Ngezantsi ubonisa indlela i-TPMS esebenza ngayo kunye nesixhobo esithile sokuxilonga kunye ne-smarthone.

 

Ukusetyenziswa kokuqala

1. Ukutshaja kunye nokuVula amandla
Xhuma enye isiphelo sekhebula lokutshaja kwi-port yokutshaja ye-i-TPMS, kunye nesinye isiphelo kwi-adapter yamandla yangaphandle (engabandakanyi), uze udibanise i-adapter yamandla kwi-AC outlet. Ngelixa ihlawuliswa, i-LED ikhanyisa ebomvu. Nje ukuba i-LED itshintshe ibe luhlaza, ibonisa ukuba ukutshaja kugqityiwe.
Cofa iqhosha elithi POWER ukuyivula. I-beep iya kuvakala kwaye isikrini siya kukhanya.

2. Imisebenzi yeqhosha

3. I-TPMS Ukukhuphela usetyenziso (Kuphela kubasebenzisi be-smartphone be-Android)

Kumsebenzisi we-smartphone yenkqubo ye-Android, skena le khowudi ilandelayo ye-QR okanye ikhowudi ye-QR ngasemva kwesixhobo se-i-TPMS ukukhuphela kunye nokufaka i-i-TPMS app kwifowuni.

Ndiyaqalisa

Ukusetyenziswa kokuqala, nceda ulandele itshati yokuqukuqela engezantsi ukuze uqalise ukuyisebenzisa.

* Amanqaku:

1. Xa uskena isixhobo se-i-TPMS sifumaneka, qiniseka ukuba sivuliwe. Emva kokukhangela, yicofe ukuze udibanise ngeBluetooth. Ukuba inguqulo ye-firmware ye-i-TPMS iphantsi kakhulu, inkqubo iya kuyiphucula ngokuzenzekelayo.
2. Kwisithuthi se-TPMS esingathanga ngqo, ngumsebenzi wokuFunda kuphela oxhaswayo. Kwisithuthi esisebenzisa i-TPMS eNgqo, ngokuqhelekileyo ibandakanya: Ukusebenza, ukuCwangcisa, ukuFunda kunye nokuxilongwa. Imisebenzi ye-TPMS ekhoyo inokwahluka kwizithuthi ezahlukeneyo ezinikwa iinkonzo kunye neeapps zeTPMS ezisetyenziswayo.

Imenyu yomsebenzi

Eli candelo lisebenza kuphela kumsebenzisi we-smartphone we-Android usebenzisa i-app ye-i-TPMS. Vula i-i-TPMS app, isikrini esilandelayo siya kuvela:

A. Iqhosha lokutshintsha imo yokubonisa
Cofa ukutshintshela kwimowudi yokubonisa eyahlukileyo.
B. Iqhosha leesetingi
Cofa ukufaka isikrini seseto.
C. Iqhosha leBluetooth lokumatanisa
Thepha ukuze uskene izixhobo ezifumanekayo zebluetooth kwaye uyibhanqe. Emva kokubhanqa, i icon yekhonkco iya kuvela kwiscreen.
D. Imodyuli yoMsebenzi
Khetha Isithuthi – Cofa ukukhetha umenzi wesithuthi omfunayo.
Umbuzo we-OE-Cofa ukujonga inani le-OE labenzi boluvo.
Ingxelo yeMbali-Cofa ku view ingxelo yembali yovavanyo lwe-TPMS.

Imisebenzi ye-TPMS

Apha sithatha isixhobo sokuxilonga kwi-example ukubonisa indlela yokwenza imisebenzi ye-TPMS ukususela kwimodyuli ye-TPMS yesixhobo sokuxilonga igubungela yonke imisebenzi ye-TPMS kwi-app ye-i-TPMS kwi-smartphone.

1. Vula iSeva
Lo msebenzi uvumela abasebenzisi ukuba benze inzwa ye-TPMS isebenze view idatha yesivamvo efana ne-ID yoluvo, uxinzelelo lwetayara, ukuphindaphindwa kwetayara, ubushushu betayara kunye nemeko yebhetri.

* Qaphela: Isixhobo siya kwenza uvavanyo lwe-TPMS ngokulandelelana kwe-FL (Ngaphambi kweKhohlo), i-FR (Ngaphambi kweKhohlo), i-RR (Ngasemva ngasemva), i-LR (ngasemva kweKhohlo) kunye ne-SPARE, ukuba isithuthi sinokhetho lwe-spare. Okanye, ungasebenzisa i./ Iqhosha le-IT ukuya kwivili elifunekayo lokuvavanya.

Kwizinzwa zendalo yonke, beka i-TPMS ecaleni kwesiqu sevalve, khomba kwindawo yoluvo, kwaye ucinezele iqhosha elithi Kulungile.
Nje ukuba inzwa isebenze ngempumelelo kwaye ihlaziywe, i-TPMS iya kungcangcazela kancinci kwaye isikrini siya kubonisa idatha yenzwa.

* Amanqaku:

• Kwizinzwa ezivulwe yimagnethi kwangoko, beka umazibuthe phezu kwesiqu uze ubeke iTPMS ecaleni kwesikhondo sevalve.
• Ukuba i-sensor ye-TPMS idinga i-tire deflation ( yomyalelo we-I 0PSI), uze udibanise isondo kwaye ubeke i-TPMS ecaleni kwesiqu ngelixa ucinezela iqhosha elithi OK.

Imisebenzi ye-TPMS

2. Inkqubo yoluvo

Lo msebenzi uvumela abasebenzisi ukuba bacwangcise idatha yesivamvo kwisivamvo sophawu oluthile kwaye babuyisele isivamvo esingalunganga ngobomi bebhetri obuphantsi okanye enye engasebenziyo.

Kukho iinketho ezine ezikhoyo zokucwangcisa i-sensor: Yenza ngokuzenzekelayo, Yenza i-Manual, iKopisha ngokuSebenzisa kunye neKopisha nge-OBD.

*Qaphela: Musa ukubeka isixhobo kufutshane nabenzi boluvo abaninzi ngaxeshanye, nto leyo enokukhokelela kukusilela kwenkqubo.

Indlela yoku-1-Yenza ngokuzenzekela

Lo msebenzi wenzelwe ukucwangcisa uphawu loluvo oluthile ngokufaka ii-ID ezingaqhelekanga ezenziwe ngokuhambelana nesithuthi sovavanyo xa singakwazi ukufumana i-ID yoluvo lokuqala.

1. Khetha ivili elifuna ukucwangciswa kwisikrini, faka inzwa kwi-slot ye-sensor ye-i-TPMS, kwaye ucofe i-Auto ukwenza i-ID entsha yoluvo.

2. Cofa Inkqubo ukubhala kwi-ID yomenzi woluvo omtsha owenziweyo kumluvo.

*Qaphela: Ukuba i-Auto ikhethiwe, umsebenzi wokufunda kwakhona we-TPMS kufuneka wenziwe emva kokucwangcisa yonke into efunekayo yoluvo.

Indlela yesi-2 - Ukuyila ngesandla

Lo msebenzi uvumela abasebenzisi ukuba bangenise ngesandla i-ID yoluvo. Abasebenzisi bangafaka i-ID engacwangciswanga okanye i-ID yoluvo lokuqala, ukuba ikhona.

Imisebenzi ye-TPMS

1. Khetha ivili eliza kucwangciswa kwiscreen, faka isivamvo kwisixhobo soluvo se-i-TPMS, kwaye ucofe. Imanyuwali.
2. Sebenzisa iphedi yesitshixo esesikrinini ukufaka i-ID yoluvo olungakhethiyo okanye loqobo (ukuba lukhona) kwaye ucofe OK.
   *Qaphela: Sukungenisa i-ID efanayo kuluvo ngalunye.
3. Landela imiyalelo yesikrini ukuze ubhale kwi-ID yoluvo kuluvo.

* Amanqaku:

• Ukuba i-ID engacwangciswanga ifakiwe, nceda wenze i-TPMS Relearn umsebenzi emva kokuba inkqubo igqityiwe. Ukuba i-ID yoqobo ifakiwe, akukho mfuneko yokuba wenze umsebenzi wokuFunda kwakhona.
• Ukuba isithuthi asiwuxhasi umsebenzi wokufunda, nceda ukhethe Imanyuwali Ukufaka i-ID yoluvo lokuqala ngesandla, okanye uqalise uluvo lokuqala kwiscreen sokuvula ukufumana ulwazi lwayo, phambi kokudweliswa koluvo.

Indlela yesi-3 - Khuphela ngokuSebenzisa

Lo msebenzi uvumela abasebenzisi ukuba babhale kwidatha yoluvo lokuqala efunyenweyo kwisivamvo sophawu oluthile. Isetyenziswa emva kokuba inzwa yoqobo iqalisiwe.

1. Ukusuka kwisikrini sokuvula, khetha indawo yevili ethile kwaye uqalise inzwa yoqobo. Emva kokuba ulwazi lufunyenwe, luya kuboniswa kwisikrini.
2. Faka inzwa kwi-slot ye-sensor ye-i-TPMS, kwaye ucofe Khuphela ngokuvula.
3. Thepha Inkqubo ukubhala kuluvo lwedatha ekhutshelweyo kumenzi woluvo.

*Qaphela: Nje ukuba icwangciswe nge Khuphela, inzwa inokufakwa kwivili ngokuthe ngqo ukuba ifakwe kwisithuthi kwaye ukukhanya kwesilumkiso se-TPMS kuya kucima.

Indlela yesi-4 - Khuphela Ngu-OBD

Lo msebenzi uvumela abasebenzisi ukuba babhale kulwazi loluvo olugciniweyo kwi-LAUNCH sensor emva kokwenza Funda ECU ID. Lo msebenzi ufuna uqhagamshelo kunye ne-DLC port yesithuthi.

Imisebenzi ye-TPMS

1. Xhuma isixhobo kwi-port ye-DLC yesithuthi, cofa Funda i-ID ye-ECU ukuqalisa ukufunda i-ID zoluvo kunye nezithuba ze viewnge.
2. Faka inzwa entsha kwi-sensor slot ye-i-TPMS, khetha indawo yevili oyifunayo kwaye ucofe Ikopi nge-OBD.
3. Thepha Inkqubo ukubhala kuluvo lwedatha ekhutshelweyo kumenzi woluvo.

 

3. Ukufunda kwakhona (Kufumaneka kuphela kwisixhobo sokuxilonga)

Lo msebenzi usetyenziselwa ukubhala i-ID yoluvo olutsha olucwangcisiweyo kwi-ECU yesithuthi kuqwalaselo loluvo.

Umsebenzi wokufunda kwakhona usebenza kuphela xa i-ID ye-sensor esandul' ukucwangciswa ihluke kwi-ID ye-sensor yokuqala egcinwe kwi-ECU yesithuthi.

Kukho iindlela ezintathu ezifumanekayo zokuFunda kwakhona: UkuFunda ngokungaguquguqukiyo, ukuZifunda kunye nokuFunda kwakhona nge-OBD.

Indlela yoku-1-iSifundo esingatshintshiyo
Ukufunda ngokungatshintshiyo kufuna ukuba isithuthi sifakwe kwindlela yokufunda/yokuziqeqesha kwakhona, emva koko ulandele imiyalelo ekwisikrini ukuze uyigqibezele.

Indlela yesi-2 - Ukuzifundela
Kwezinye izithuthi, umsebenzi wokufunda unokugqitywa ngokuqhuba. Jonga kumanyathelo okufunda kwiscreen ukwenza umsebenzi.

Indlela yesi-3-Funda kwakhona nge-OBD
Lo msebenzi uvumela isixhobo sokuxilonga ukuba sibhale ii-ID zoluvo kwimodyuli ye-TPMS. Ukwenza ukufunda kwakhona nge-OBD, qala uvule zonke izinzwa, emva koko usebenzise isixhobo sokuxilonga kunye ne-VCI ebandakanyiweyo ukugqiba amanyathelo okufunda ngokulandela imiyalelo yesikrini.

Ukulungisa ingxaki

Apha ngezantsi kudweliswe imibuzo edla ngokubuzwa ye-i-TPMS.

Umbuzo: Kutheni i-i-TPMS yam ihlala ihleli wamkelekile isikrini?
A: Ukuba isixhobo sihlala sibonisa isikrini sokwamkela, kubonisa ukuba asikho kwimodi yokusebenza ye-TPMS. Ukuba isixhobo sokuxilonga senza umsebenzi we-TPMS, isixhobo siya kutshintshela kwimodi yokusebenza ehambelanayo.

Umbuzo: Ngaba ndingaseta ulwimi lwenkqubo ye-iTPMS yam?
A: Iyahluka ngolwimi lwenkqubo yesixhobo sokuxilonga / i-smartphone edibanisa. Okwangoku kuphela isiNgesi kunye nesiTshayina esenziwe lula ezifumanekayo kwisixhobo. Ukuba isixhobo sibhaqa ulwimi lwenkqubo yesixhobo sokuxilonga / i-smartphone ayisiso isiTshayina, iya kutshintsha ibe yisiNgesi ngokuzenzekelayo nokuba loluphi ulwimi isixhobo sokuxilonga / i-smartphone isekwe njenge.

Umbuzo: I-i-TPMS yam ayiphenduli.
A: Kule meko, nceda ujonge ngononophelo oku kulandelayo:
• Ingaba isixhobo siqhagamshelwe ngempumelelo kwisixhobo sokuxilonga/i-smartphone ngaphandle kwamacingo.
• Ingaba isixhobo sivuliwe na.
• Nokuba isixhobo sonakele okanye asisebenzi.

 

Umbuzo: Kutheni i-i-TPMS yam izenzekela ngokuzenzekelayo umbane ucimile?
A: Nceda ujonge oku kulandelayo:
• Ukuba isixhobo sikhululwe ngokupheleleyo.
• Ukuba ifowuni ayitshajwa kwaye akukho msebenzi kwisixhobo kangangemizuzu engama-30, iya kuzicima ngokuzenzekelayo ukuze konge amandla ebhetri.

Q: I-i-TPMS yam ayikwazi ukwenza inzwa.
A: Nceda ujonge oku kulandelayo:
• Nokuba isixhobo sonakele okanye asisebenzi.
• Ingaba i-sensor, imodyuli okanye i-ECU ngokwayo ingonakaliswa okanye ineziphene.
• Isithuthi asinaso isivamvo nangona kukho isikhondo sevalvu yentsimbi. Qaphela iziqu ze-snap-in ze-rubber ye-Schrader ezisetyenziswa kwiinkqubo ze-TPMS.
• Isixhobo sakho sinokufuna uphuculo lwe-firmware.

Q: Yintoni enokuyenza ukuba i-TPMS yam idibene ezinye iibugs ezingalindelekanga?
A: Kule meko, uphuculo lwe-firmware luyafuneka. Kwisikrini sokukhetha inguqulelo yeTPMS, cofa Uhlaziyo lweFirmware ukuyiphucula.

 

Isilumkiso seFCC

Esi sixhobo sithobela inxalenye ye-15 yeMithetho yeFCC. Umsebenzi uxhomekeke kwezi meko zimbini zilandelayo:
(1) Esi sixhobo asinakubanga luphazamiso luyingozi, kwaye (2) esi sixhobo kufuneka samkele naluphi na uphazamiseko olufunyenweyo, kuquka uphazamiseko olunokubangela usetyenziso olungafunekiyo.

Naluphi na uTshintsho okanye uhlengahlengiso olungavunywanga ngokucacileyo liqela elinoxanduva lokuthotyelwa lunokuphelisa igunya lomsebenzisi lokusebenzisa isixhobo.

Qaphela: Esi sixhobo sivavanyiwe kwaye safunyanwa sithobela imida yesixhobo sedijithali soDidi B, ngokungqinelana nenxalenye ye-15 yeMithetho yeFCC. Le mida yenzelwe ukubonelela ngokhuseleko olufanelekileyo ekuphazamisekeni okunobungozi kwindawo yokuhlala. Esi sixhobo sivelisa ukusetyenziswa kwaye sinokusasaza amandla amaza erediyo kwaye, ukuba asifakanga kwaye sisetyenziswe ngokuhambelana nemiyalelo, sinokubangela uphazamiseko oluyingozi kunxibelelwano lwerediyo. Nangona kunjalo, akukho siqinisekiso sokuba ukuphazamiseka akuyi kwenzeka kufakelo oluthile. Ukuba esi sixhobo sibangela uphazamiseko oluyingozi kunomathotholo okanye ulwamkelo lukamabonakude, olunokumiselwa ngokucinywa nokulayita isixhobo, umsebenzisi uyakhuthazwa ukuba azame ukulungisa uphazamiseko ngenye okanye ngaphezulu kwezi ndlela zilandelayo:

• -Jonga kwakhona okanye uhambise i-eriyali efumanayo.
• -Ukwandisa ukwahlukana phakathi kwesixhobo kunye nomamkeli.
• -Qhagamshela isixhobo kwindawo yokuphuma kwisekethe eyahlukileyo kuleyo ekuyo umamkeli
  iqhagamshelwe.
• -Qhagamshelana nomthengisi okanye igcisa likanomathotholo/kumabonakude ukuze ufumane uncedo.

Esi sixhobo sivavanyiwe ukuze sihlangabezane neemfuneko zokuba sesichengeni seRF ngokubanzi. Isixhobo sinokusetyenziswa kwimeko ephathwayo yokuvezwa ngaphandle kwesithintelo.

 

 

Amaxwebhu / Izibonelelo

YENZA i-TPMS yesiXhobo sokuSebenza seModyuli [pdf] Incwadi yokusebenzisa XUJITPMS, XUJITPMS itpms, i-TPMS iModular Activation Programming Tool, i-TPMS, iModular Activation Programming Tool

Iimbekiselo

• Incwadi yokusebenzisa