Ho lemoha le ho lokisa phoso ea MICROCHIP ho RTG4 LSRAM Memori

Nalane ea Phetoho

Nalane ea ntlafatso e hlalosa liphetoho tse kentsoeng tšebetsong tokomaneng. Liphetoho li thathamisitsoe ka ntlafatso, ho qala ka khatiso ea morao-rao.

Phetolelo ea 4.0
Se latelang ke kakaretso ea liphetoho tse entsoeng tokisong ena.

• E ntlafalitse tokomane ea Libero SoC v2021.2.
• E Ekelitsoe Sehlomathiso sa 1: Ho hlophisa sesebelisoa ka FlashPro Express, leqephe la 14.
• Sehlomathiso se Ekelitsoeng 2: Ho tsamaisa TCL Script, leqepheng la 16.
• E tlositse litšupiso tsa linomoro tsa mofuta oa Libero.

Phetolelo ea 3.0
E ntlafalitse tokomane ea tokollo ea software ea Libero v11.9 SP1.

Phetolelo ea 2.0
E ntlafalitse tokomane ea tokollo ea software ea Libero v11.8 SP2.

Phetolelo ea 1.0
Khatiso ea pele ea tokomane ena.

Ho lemoha le ho lokisa phoso ho RTG4 LSRAM Memori

Moralo ona oa litšupiso o hlalosa bokhoni ba ho lemoha le ho lokisa liphoso (EDAC) tsa RTG4™ FPGA LSRAMs. Sebakeng se le seng se ferekaneng (SEU) tikolohong e ka hlaseloang habonolo, RAM e tloaetse liphoso tsa nakoana tse bakoang ke li-ion tse boima. Liphoso tsena li ka bonoa le ho lokisoa ka ho sebelisa likhoutu tsa ho lokisa liphoso (ECCs). Li-block tsa RTG4 FPGA RAM li na le li-control tsa EDAC tse hahelletsoeng ho hlahisa likhoutu tsa tokiso ea phoso bakeng sa ho lokisa phoso ea 1-bit kapa ho bona phoso ea 2-bit.

Haeba phoso ea 1-bit e fumanoa, molaoli oa EDAC o lokisa sekhahla sa phoso ebe o beha folakha ea ho lokisa phoso (SB_CORRECT) ho ea holimo. Haeba phoso ea 2-bit e fumanoa, molaoli oa EDAC o beha folakha ea ho lemoha phoso (DB_DETECT) ho ea holimo.
Bakeng sa tlhaiso-leseling e batsi mabapi le ts'ebetso ea RTG4 LSRAM EDAC, sheba UG0574: RTG4 FPGA Fabric

Bukana ea Mosebelisi.
Moqaping ona oa litšupiso, phoso ea 1-bit kapa phoso ea 2-bit e hlahisoa ka SmartDebug GUI. EDAC e bonoa e sebelisa sebopeho sa mosebelisi (GUI), e sebelisa sebopeho sa UART ho fihlella LSRAM bakeng sa ho baloa / ho ngola lintlha, Libero® System-on-Chip (SoC) SmartDebug (JTAG) e sebelisoa ho kenya liphoso mohopolong oa LSRAM.

Litlhoko tsa Moralo
Letlapa la 1 le thathamisa litlhoko tsa moralo oa litšupiso bakeng sa ho tsamaisa demo ea RTG4 LSRAM EDAC.

Letlapa la 1 • Litlhoko tsa Moqapi

Software

• Libero SoC
• FlashPro Express
• SmartDebug
• Bakhanni ba PC ba amohelang USB ho bakhanni ba UART

Hlokomela: Libero SmartDesign le lithunya tsa skrineng tsa tlhophiso tse bontšitsoeng tataisong ena ke tsa papiso feela.
Bula moralo oa Libero ho bona lintlafatso tsa morao-rao.

Lintho tse hlokahalang
Pele o qala:
Khoasolla le ho kenya Libero SoC (joalo ka ha ho bonts'itsoe ho websebaka sa moralo ona) ho PC e amohelang ho tsoa sebakeng se latelang: https://www.microsemi.com/product-directory/design-resources/1750-libero-soc

Moqapi oa Demo
Khoasolla moralo oa demo files ho tloha Microsemi websebaka ho: http://soc.microsemi.com/download/rsc/?f=rtg4_dg0703_df

Moralo oa demo files kenyeletsa:

• Morero oa Libero SoC
• Sesebelisoa sa GUI
• Lenaneo files
• Balame.txt file
• TCL_Scripts

Sesebelisoa sa GUI ho PC e amohelang litaba se laela sesebelisoa sa RTG4 ka sebopeho sa USB-UART. Sehokelo sena sa UART se entsoe ka CoreUART, e leng IP ea logic e tsoang lethathamong la Libero SoC IP. CoreUART IP ka lesela la RTG4 e amohela litaelo ebe e li fetisetsa ho logic ea decoder logic. Taelo ea "decoder logic" e khetholla taelo ea ho bala kapa ho ngola, e etsoang ho sebelisoa mohopolo oa memori.

Sebopeho sa memori se sebelisetsoa ho bala / ho ngola le ho lekola lifolakha tsa liphoso tsa LSRAM. EDAC e hahelletsoeng e lokisa phoso ea 1-bit ha e ntse e bala ho tsoa LSRAM mme e fana ka data e lokisitsoeng ho sebopeho sa mosebelisi empa ha e ngole data e lokisitsoeng ho khutlela LSRAM. LSRAM EDAC e hahelletsoeng ka hare ha e kenye ts'ebetso ea ho hohla. Moralo oa demo o sebelisa logic ea scrub, e hlokomelang folakha ea tokiso ea 1-bit le ho nchafatsa LSRAM ka data e lokisitsoeng haeba phoso e le 'ngoe e etsahala.
SmartDebug GUI e sebelisetsoa ho kenya phoso ea 1-bit kapa 2-bit ho data ea LSRAM.
Setšoantšo sa 1 se bonts'a setšoantšo sa "block" sa boemo bo holimo sa moralo oa demo oa RTG4 LSRAM EDAC.

Setšoantšo sa 1 • Sets'oants'o sa Thibelo ea Boemo bo Phahameng

Tse latelang ke litlhophiso tsa moralo oa demo:

1. LSRAM e etselitsoe ×18 mode 'me EDAC e lumelloa ka ho hokela LSRAMs ECC_EN lets'oao ho ea holimo.
   Hlokomela: LSRAM EDAC e ts'ehelitsoe ka mekhoa ea ×18 le ×36 feela.
2. CoreUART IP e lokiselitsoe ho buisana le ts'ebeliso ea PC e amohelang ka sekhahla sa 115200 baud.
3. RTG4FCCCECALIB_C0 e hlophiselitsoe ho ts'oara CoreUART le lintlha tse ling tsa masela ho 80 MHz.

Likaroloana
Tse latelang ke likarolo tsa moralo oa demo:

• Bala 'me u ngolle LSRAM
• Kenya phoso ea 1-bit le 2-bit u sebelisa SmartDebug
• Hlahisa lipalo tsa liphoso tsa 1-bit le 2-bit
• Tokisetso ea ho hlakola lipalo tsa liphoso
• Numella kapa o tima mohopolo oa ho hlakola memori

Tlhaloso
Moralo ona oa demo o kenyelletsa ts'ebetsong ea mesebetsi e latelang:

• Ho qala le ho fihlella LSRAM
  Mokhoa oa mohopolo oa mohopolo o kentsoeng mohopolong oa lesela o fumana taelo ea ho qala ho tsoa ho GUI mme o qala libaka tsa memori tsa 256 tsa LSRAM ka data e ntseng e eketseha. E boetse e etsa ts'ebetso ea ho bala le ho ngola libakeng tsa 256 tsa LSRAM ka ho amohela aterese le data ho tsoa ho GUI. Bakeng sa ts'ebetso ea ho bala, moralo o lata data ho LSRAM ebe o e fa GUI bakeng sa ponts'o. Tebello ke hore moralo o ke ke oa baka liphoso pele o sebelisa SmartDebug.

Hlokomela: Libaka tsa memori tse sa sebetseng li kanna tsa ba le boleng bo sa reroang, 'me SmartDebug e ka bonts'a liphoso tsa karolo e le' ngoe kapa habeli libakeng tseo.

• Ho kenya liphoso tsa 1-bit kapa 2-bit
  SmartDebug GUI e sebelisetsoa ho kenya liphoso tse 1-bit kapa 2-bit sebakeng se boletsoeng sa LSRAM. Ts'ebetso e latelang e etsoa ho sebelisoa SmartDebug ho kenya liphoso tsa 1-bit le 2-bit ho LSRAM:
  • Bula SmartDebug GUI, tobetsa Debug FPGA Array.
  • Eya ho Memory Blocks tab, khetha mohlala oa memori, 'me u tobetse ka ho le letona Eketsa.
  • Ho bala boloko ba memori, tobetsa Bala Block.
  • Kenya phoso e le 'ngoe kapa habeli sebakeng sefe kapa sefe sa LSRAM sa botebo bo itseng.
  • Ho ngolla sebakeng se fetotsoeng, tobetsa Ngola Block.
    Nakong ea ts'ebetso ea LSRAM ea ho bala le ho ngola ka SmartDebug (JTAG) sehokelo, molaoli oa EDAC o fetisitsoe mme ha a balle likotoana tsa ECC bakeng sa ts'ebetso ea ho ngola mohatong oa e.
• Ho bala Liphoso
  Li-counters tsa 8-bit li sebelisoa ho fana ka palo ea liphoso 'me li entsoe ka mokhoa oa lesela ho bala liphoso tsa 1-bit kapa 2-bit. Taelo ea decoder logic e fana ka litekanyetso tsa ho bala ho GUI ha u amohela litaelo ho tsoa ho GUI.

Sebopeho sa Tsupanako
Moqaping ona oa demo, ho na le sebaka se le seng sa oache. Oscillator ea ka hare ea 50 MHz e khanna RTG4FCCC, e tsoelang pele ho khanna RTG4FCCCECALIB_C0. RTG4FCCCECALIB_C0 e hlahisa oache ea 80 MHz e fanang ka mohloli oa oache ho li-module tsa COREUART, cmd_decoder, TPSRAM_ECC, le RAM_RW.
Setšoantšo se latelang se bontša sebopeho sa clocking sa moralo oa demo.

Setšoantšo sa 2 • Sebopeho sa Tshupa

Seta Sebopeho bocha
Moqaping ona oa demo, lets'oao la ho seta bocha ho li-module tsa COREUART, cmd_decoder, le RAM_RW li fanoa ka boema-kepe ba LOCK ba RTG4FCCCECALIB_C0. Setšoantšo se latelang se bonts'a sebopeho sa reset ea moralo oa demo.

Setšoantšo sa 3 • Seta Sebopeho bocha

Ho theha Demo Design
Likarolo tse latelang li hlalosa mokhoa oa ho theha RTG4 Development Kit le GUI ho tsamaisa moralo oa demo.

Litlhophiso tsa Jumper

1. Hokela li-jumpers ho RTG4 Development Kit, joalo ka ha ho bonts'itsoe ho Lethathamo la 2.
   Lethathamo la 2 • Litlhophiso tsa Jumper

   Jumper	Pin (Ho tsoa)	Pina (Ho)	Maikutlo
   J11, J17, J19, J21, J23, J26, J27, J28	1	2	Ea kamehla
   J16	2	3	Ea kamehla
   J32	1	2	Ea kamehla
   J33	1	3	Ea kamehla
   	2	4

   Hlokomela: Tima sesebelisoa sa phepelo ea motlakase, SW6, ha u ntse u hokela li-jumpers.

2. Hokela thapo ya USB (USB e nyane ho Type-A USB cable) ho J47 ya RTG4 Development Kit le pheletsong e nngwe ya thapo boemakepeng ba USB ba komporo e amohelang batho.
3. Netefatsa hore bakhanni ba borokho ba USB ho UART ba fumaneha ka bo eona. Sena se ka netefatsoa ho mookameli oa sesebelisoa sa PC e amohelang.
   Setšoantšo sa 4 se bonts'a thepa ea serial port ea USB 2.0 le COM31 e hokahantsoeng le USB serial converter C.

Setšoantšo sa 4 • USB ho ea ho UART Bridge Drivers

Hlokomela: Haeba li-driver tsa borokho tsa USB ho UART li sa kengoa, jarolla le ho kenya li-driver ho tloha www.microsemi.com//documents/CDM_2.08.24_WHQL_Certified.zip

Setšoantšo sa 5 se bonts'a ho hlophisoa ha boto bakeng sa ho tsamaisa demo ea EDAC ho RTG4 Development Kit.

Lenaneo la Moralo oa Demo

1. Qala software ea Libero SOC.
2. Ho hlophisa RTG4 Development Kit ka mosebetsi file e fanoeng joalo ka karolo ea moralo files sebelisa software ea FlashPro Express, sheba Sehlomathiso sa 1: Ho Rulahanya Sesebediswa U Sebelisa FlashPro Express,leqephe la 14.
   Hlokomela: Hang ha lenaneo le phethiloe ka mosebetsi file ka software ea FlashPro Express, tsoela pele ho EDAC Demo GUI, leqepheng la 9. Ho seng joalo, tsoela pele mohatong o latelang.
3. Ka phallo ea moralo oa Libero, tlanya ketso ea Run Program.
4. Hang ha Lenaneo le phethiloe, letšoao le letala le hlaha ka pel'a 'Run Program Action' e bontšang katleho ea moralo oa demo.

EDAC Demo GUI
Pontšo ea EDAC e fanoa ka GUI e bonolo ho basebelisi, joalo ka ha ho bonts'itsoe ho Setšoantšo sa 7, se sebetsang ho PC e amohelang, e buisanang le RTG4 Development Kit. UART e sebelisoa e le mokhoa oa motheo oa puisano pakeng tsa PC e amohelang le RTG4 Development Kit.

GUI e na le likarolo tse latelang:

1. Khetho ea boema-kepe ba COM ho theha khokahano ea UART ho RTG4 FPGA ka sekhahla sa baud sa 115200.
2. LSRAM Memory Ngola: Ho ngola data ea 8-bit atereseng e boletsoeng ea LSRAM.
3. Memory Scrubbing: Ho thusa kapa ho tima mohopolo oa ho hohla.
4. LSRAM Memory Read: Ho bala data ea 8-bit ho tsoa atereseng e boletsoeng ea LSRAM.
5. Palo ea Phoso: E bonts'a palo ea liphoso mme e fana ka khetho ea ho hlakola boleng ba counter ho zero.
6. Palo ea Phoso ea 1-bit: E bonts'a palo ea liphoso tsa 1-bit mme e fana ka khetho ea ho hlakola boleng ba counter ho zero.
7. Palo ea Phoso ea 2-bit: E bonts'a palo ea liphoso tsa 2-bit mme e fana ka khetho ea ho hlakola boleng ba counter ho zero.
8. Lintlha tsa Log: E fana ka tlhahisoleseling ea boemo bakeng sa ts'ebetso e 'ngoe le e' ngoe e etsoang ho sebelisoa GUI.

Ho tsamaisa Demo
Mehato e latelang e hlalosa mokhoa oa ho tsamaisa demo:

1. Eya ho \v1.2.2\v1.2.2\Exe ebe o tobetsa habeli EDAC_GUI.exe joalokaha ho bontšitsoe ho Setšoantšo sa 8.
2. Khetha boema-kepe ba COM31 lethathamong ebe o tobetsa Connect.

Ente e le 'ngoe ea phoso le tokiso

1. Moqaping o fanoeng oa Libero, tobetsa habeli ho SmartDebug Design ho phallo ea moralo.
2. Ho SmartDebug GUI, tobetsa Debug FPGA Array.
3. Fesetereng ea Debug FPGA Array, e ea ho Memory Blocks tab. E tla bonts'a block ea LSRAM moralong ka mokhoa o utloahalang le oa 'mele view. Li-blocks tse utloahalang li bonts'oa ka letšoao la L, 'me li-block tsa 'mele li bonts'oa ka lets'oao la P.
4. Khetha mohlala oa block block 'me u tobetse ka ho le letona Eketsa.
5. Ho bala boloko ba memori, tobetsa Bala Block.
6. Enta phoso ea 1 bit ho data ea 8 bit sebakeng sefe kapa sefe sa LSRAM ho fihlela botebong ba 256, joalo ka ha ho bonts'itsoe setšoantšong se latelang moo phoso e 1 e kentsoeng sebakeng sa 0 sa LSRAM.
7. Tobetsa Ngola Block e le hore u ngole lintlha tse fetotsoeng sebakeng se reriloeng.
8. E-ea ho EDAC GUI 'me u kenye sebaka sa Aterese karolong ea LSRAM Memory Read ebe u tobetsa Bala, joalokaha ho bontšitsoe setšoantšong se latelang.
9. Ela hloko Palo ea Phoso ea Bit e 1 'me u Bala likarolo tsa Boitsebiso ho GUI. Palo ea liphoso e eketseha ka 1.
   Sebaka sa Read Data se hlahisa lintlha tse nepahetseng ha EDAC e lokisa bothata.

Hlokomela: Haeba memori ea memori e sa lumelloa, palo ea liphoso e ea eketseha bakeng sa palo e 'ngoe le e' ngoe e baloang ho tsoa atereseng e tšoanang ea LSRAM kaha e baka phoso ea 1-bit.

Ente ea phoso e habeli le ho Fumana

1. Etsa mohato oa 1 ho isa mohato oa 5 joalo ka ha ho fanoe ka ente ea phoso e le 'ngoe le tokiso, leqepheng la 10.
2. Kenya phoso ea 2-bit datang ea 8-bit sebakeng sefe kapa sefe sa LSRAM ho fihlela botebong ba 256, joalo ka ha ho bontšitsoe setšoantšong se latelang moo phoso ea 2-bit e kentsoeng sebakeng sa 'A' sa LSRAM.
3. Tobetsa Ngola Block ho ngola lintlha tse fetotsoeng sebakeng se reriloeng.
4. E-ea ho EDAC GUI 'me u kenye sebaka sa Aterese karolong ea LSRAM Memory Read ebe u tobetsa Bala, joalokaha ho bontšitsoe setšoantšong se latelang.
5. Ela hloko Palo ea Liphoso tsa 2-bit le ho Bala likarolo tsa Boitsebiso ho GUI. Palo ea liphoso e eketseha ka 1.
   Sebaka sa Read Data se bontsha boitsebiso bo senyehileng.

Liketso tsohle tse entsoeng ho RTG4 li kenngoa karolong ea Serial Console ea GUI.

Qetello
Demo ena e totobatsa bokhoni ba EDAC ba mehopolo ea RTG4 LSRAM. Phoso ea 1-bit kapa phoso ea 2-bit e hlahisoa ka SmartDebug GUI. Tokiso ea phoso ea 1-bit le ho lemoha phoso ea 2-bit e bonoa ho sebelisoa EDAC GUI.

Ho hlophisa sesebelisoa u sebelisa FlashPro Express

Karolo ena e hlalosa mokhoa oa ho hlophisa sesebelisoa sa RTG4 ka mosebetsi oa ho etsa mananeo file sebelisa FlashPro Express.

Ho hlophisa sesebelisoa, etsa mehato e latelang:

1. Netefatsa hore litlhophiso tsa jumper botong li tšoana le tse thathamisitsoeng ho Lethathamo la 3 la UG0617:
   Tataiso ea mosebelisi ea RTG4 Development Kit.
2. Ka boikhethelo, jumper J32 e ka hlophisoa ho hokahanya likhoele 2-3 ha o sebelisa FlashPro4, FlashPro5, kapa FlashPro6 ea kantle ho e-na le sethala sa jumper sa kamehla ho sebelisa FlashPro5 e kenelletseng.
   Hlokomela: Sesebelisoa sa phepelo ea matla, SW6 se tlameha ho tingoa ha ho ntse ho etsoa likhokahano tsa jumper.
3. Hokela thapo ea phepelo ea matla ho sehokelo sa J9 botong.
4. Matla HO sesebelisoa sa phepelo ea motlakase SW6.
5. Haeba u sebelisa FlashPro5 e kentsoeng, hokela thapo ea USB ho sehokelo J47 le PC e amohelang.
   Ntle le moo, haeba u sebelisa sebatli sa kantle, hokela thapo ea ribone ho mohala oa JTAG hlooho J22 'me u kopanye moqapi ho PC e amohelang.
6. Ho PC e amohelang, qala software ea FlashPro Express.
7. Tobetsa e Ncha kapa khetha Morero o Mocha oa Mosebetsi ho FlashPro Express Job ho tsoa lenaneng la Morero ho theha projeke e ncha ea mosebetsi, joalo ka ha ho bonts'itsoe setšoantšong se latelang.
8. Kenya tse latelang ho Morero o Mocha oa Mosebetsi ho tsoa lebokoseng la puisano la FlashPro Express Job:
   • Mosebetsi oa mananeo file: Tobetsa Browse, 'me u tsamaee ho ea sebakeng seo .job e leng ho sona file e fumaneha ebe u khetha file. Sebaka sa kamehla ke: \rtg4_dg0703_df\Programming_Job
   • Sebaka sa morero oa mosebetsi oa FlashPro Express: Tobetsa Batla 'me u tsamaise ho ea sebakeng se lakatsehang sa morero oa FlashPro Express.
9. Tobetsa OK. Lenaneo le hlokahalang file e khethiloe ebile e loketse ho hlophisoa sesebelisoa.
10. Fesetere ea FlashPro Express e tla hlaha, netefatsa hore nomoro ea mohlophisi e hlaha tšimong ea Programmer. Haeba e sa etse joalo, netefatsa likhokahano tsa boto ebe o tobetsa Refresh/Rescan Programmers.
11. Tobetsa RUN. Ha sesebelisoa se hlophisoa ka katleho, boemo ba RUN PASSED bo bontšoa joalo ka ha ho bontšitsoe setšoantšong se latelang.
12. Koala FlashPro Express kapa tobetsa Tsoa ho tab ea Project.

Ho matha TCL Script

Lingoliloeng tsa TCL li fanoe ka moralo files tlas'a directory TCL_Scripts. Haeba ho hlokahala, moralo
phallo e ka hlahisoa hape ho tloha ho Design Implementation ho fihlela tlhahiso ea mosebetsi file.

Ho tsamaisa TCL, latela mehato e ka tlase:

1. Qala software ea Libero
2. Kgetha Morero > Phetha Sengoloa….
3. Tobetsa Batla ebe u khetha script.tcl bukeng e jarollotsoeng ea TCL_Scripts.
4. Tobetsa Matha.

Kamora ts'ebetso e atlehileng ea sengoloa sa TCL, projeke ea Libero e thehiloe ka har'a bukana ea TCL_Scripts.
Ho fumana lintlha tse ling mabapi le lingoliloeng tsa TCL, sheba rtg4_dg0703_df/TCL_Scripts/readme.txt.
Sheba ho Libero® SoC TCL Command Reference Guide bakeng sa lintlha tse ling mabapi le litaelo tsa TCL. Ikopanye le Tšehetso ea Theknoloji bakeng sa lipotso leha e le life tseo u ka kopanang le tsona ha u sebelisa mongolo oa TCL.

Microsemi ha e fane ka tiisetso, boemeli, kapa tiiso mabapi le tlhahisoleseding e teng mona kapa ho lekana ha lihlahisoa le litšebeletso tsa eona bakeng sa morero ofe kapa ofe, leha e le hore Microsemi ha e nke boikarabelo leha e le bofe bo hlahang ka lebaka la kopo kapa tšebeliso ea sehlahisoa leha e le sefe kapa potoloho. Lihlahisoa tse rekisoang ka tlase mona le lihlahisoa tse ling tse rekisoang ke Microsemi li 'nile tsa lekoa ka mokhoa o lekanyelitsoeng' me ha lia lokela ho sebelisoa hammoho le lisebelisoa tsa bohlokoa tsa mosebetsi kapa likopo. Litlhaloso life kapa life tsa ts'ebetso ho lumeloa hore lia tšepahala empa ha lia netefatsoa, ​​​​'me Moreki o tlameha ho tsamaisa le ho tlatsa ts'ebetso eohle le liteko tse ling tsa lihlahisoa, a le mong, hammoho le, kapa a kentsoe, lihlahisoa life kapa life tsa ho qetela. Moreki a ke ke a itšetleha ka lintlha leha e le life le litlhaloso tsa ts'ebetso kapa litekanyetso tse fanoeng ke Microsemi. Ke boikarabello ba Moreki ho iketsetsa qeto ea hore na lihlahisoa life kapa life lia tšoaneleha le ho etsa liteko le ho netefatsa se tšoanang. Boitsebiso bo fanoeng ke Microsemi mona ka tlase bo fanoe "joalokaha bo le teng, bo hokae" le ka liphoso tsohle, 'me kotsi eohle e amanang le boitsebiso bo joalo ke ka ho feletseng le Moreki. Microsemi ha e fane, ka ho hlaka kapa ka mokhoa o hlakileng, ho mokga leha e le ofe litokelo tsa patent, li-license, kapa litokelo tse ling tsa IP, ebang ke mabapi le boitsebiso bo joalo ka boeona kapa ntho leha e le efe e hlalositsoeng ke boitsebiso bo joalo. Tlhahisoleseding e fanoeng tokomaneng ena ke ea mong'a Microsemi, 'me Microsemi e na le tokelo ea ho etsa liphetoho leha e le life tlhahisoleseding e tokomaneng ena kapa ho lihlahisoa leha e le life le litšebeletso ka nako leha e le efe ntle le tsebiso.

Mabapi le Microsemi Microsemi, motlatsi oa ka ho feletseng oa Microchip Technology Inc. (Nasdaq: MCHP), e fana ka mosebetsi o pharaletseng oa li-semiconductor le mekhoa ea tsamaiso bakeng sa lifofane le tšireletso, puisano, setsi sa data le limmaraka tsa indasteri. Lihlahisoa li kenyelletsa li-circuits tse kopantsoeng tse sebetsang hantle le tse nang le mahlaseli a kotsi, li-FPGA, SoCs le ASIC; lihlahisoa tsa tsamaiso ea matla; lisebelisoa tsa nako le tsa ho hokahanya le litharollo tsa nako tse nepahetseng, tse behang maemo a lefats'e bakeng sa nako; lisebelisoa tsa ho sebetsana le lentsoe; RF tharollo; likarolo tse ikhethang; polokelo ea khoebo le tharollo ea likhokahano, mahlale a ts'ireletso le anti-t scalableamplihlahisoa tsa er; Litharollo tsa Ethernet; Matla-over-Ethernet ICs le midspans; hammoho le bokhoni le litšebeletso tsa moralo oa tloaelo. Ithute haholoanyane ho www.microsemi.com.

Ntlo-khōlō ea Microsemi
One Enterprise, Aliso Viejo,
CA 92656 USA
Ka hare ho USA: +1 800-713-4113
Kantle ho USA: +1 949-380-6100
Lithekiso: +1 949-380-6136
Fax: +1 949-215-4996
Email: thekiso.support@microsemi.com
www.microsemi.com

©2021 Microsemi, e leng lekala le felletseng la Microchip Technology Inc. Litokelo tsohle li sirelelitsoe. Microsemi le logo ea Microsemi ke matšoao a ngolisitsoeng a Microsemi Corporation. Matshwao a mang kaofela a kgwebo le matshwao a ditshebeletso ke thepa ya beng ba ona ka ho fapana.

Tlhahlobo ea Microsemi Proprietary DG0703 4.0

Litokomane / Lisebelisoa

Ho lemoha le ho lokisa phoso ea MICROCHIP ho RTG4 LSRAM Memori [pdf] Bukana ea Mosebelisi Demo ea DG0703, Ho Fumana Phoso le Tokiso ho RTG4 LSRAM Memori, Ho Fumana le Tokiso ho RTG4 LSRAM Memori, RTG4 LSRAM Memori, LSRAM Memori.

Litšupiso

• Bukana ea Mosebelisi