KUITA KURARAMA KWEMAZUVA ANOITIKA
Technical Information
MC400
Microcontroller
Tsanangudzo
Iyo Danfoss MC400 microcontroller ndeye yakawanda-loop controller iyo yakaomeswa zvakatipoteredza kune mobile off-highway yakavhurika uye yakavharwa loop control system application. Iyo ine simba 16-bit yakamisikidzwa microprocessor inobvumira iyo MC400 kudzora masisitimu akaomarara seanomira ega controller kana senhengo yeController Area Network (CAN) system Iine 6-axis yekuburitsa kugona, iyo MC400 ine simba rakakwana uye kuchinjika kubata akawanda. mashandiro emuchina. Izvi zvinogona kusanganisira hydrostatic propel maseketi, akavhurika uye akavhara loop basa mabasa uye opareta interface control. Zvishandiso zvinodzorwa zvinogona kusanganisira magetsi ekudzora mavharuvhu, proportional solenoid mavharuvhu uye Danfoss PVG akatevedzana ekudzora mavharuvhu.
Iyo controller inogona kutarisana neyakasiyana-siyana analog uye dijitari sensors senge potentiometers, Hall-efect sensors, pressure transducers uye pulse pickups. Rumwe ruzivo rwekutonga runogonawo kuwanikwa kuburikidza neCAN kutaurirana.
Chaiyo I/O mashandiro eMC400 inotsanangurwa nesoftware yekushandisa iyo inoiswa mukudzora mwenje wendangariro. Iyi programming process inogona kuitika kufekitori kana mumunda kuburikidza nelaptop komputa RS232 port. WebGPI ™ ndiyo Danfoss yekukurukurirana software inofambisa maitiro aya, uye inobvumira mamwe akasiyana maficha emushandisi.
Iyo MC400 controller ine yepasi-ye-iyo-art yedunhu redunhu gungano mukati mearuminiyamu die-cast imba. Zvibatanidza zviviri zvakasarudzwa P1 uye P2 zvinopa magetsi ekubatanidza. Aya makiyi ega ega, 24-pini zvinongedzo zvinopa mukana kune yekudzora yekupinza uye kubuda mabasa pamwe nemagetsi ekupa uye kutaurirana kwekubatanidza. Imwe sarudzo, pabhodhi 4-character LED kuratidza uye mana membrane switch inogona kupa humwe mashandiro.
Features
- Robust electronics inoshanda pamusoro pemhando ye9 kusvika 32 Vdc ine reverse bhatiri, yakaipa yenguva pfupi uye inotakura dump dziviriro.
- Dhizaini yakaomeswa kwezvakatipoteredza inosanganisira yakavharwa die-cast aruminiyamu imba inoshingirira yakaomarara nharembozha inoshanda mamiriro anosanganisira kuvhunduka, vibration, EMI/RFI, high pressure yekugeza pasi uye tembiricha uye humidity yakanyanyisa.
- High performance 16-bit Infineon C167CR microprocessor inosanganisira pabhodhi CAN 2.0b interface uye 2Kb yemukati RAM.
- 1 MB yekudzora ndangariro inobvumira kunyange yakanyanya kuomarara software yekudzora maapplication. Software inotorwa kune mutongi, ichibvisa kukosha kwekuchinja EPROM zvikamu kuti uchinje software.
- Controller Area Network (CAN) yekutaurirana port inosangana neiyo 2.0b standard. Iyi yekumhanyisa serial asynchronous kutaurirana inobvumira kuchinjisa ruzivo nemamwe maturusi ane CAN kutaurirana. Iyo baud mwero uye chimiro chedata chinotemerwa nesoftware yekudzora inobvumira tsigiro yezvibvumirano zvakaita seJ-1939, CAN Vhura uye Danfoss S-net.
- Iyo Danfoss yakajairika mana LED gadziriso inopa sisitimu uye ruzivo rwekushandisa.
- Iyo inosarudzika 4-character LED kuratidza uye mana membrane switch inopa nyore kuseta, calibration uye ruzivo rwekugadzirisa matambudziko.
- Iwo matanhatu ePWM mavharuvhu emutyairi maviri anopa kusvika ku3 amps yekuvhara loop inodzorwa ikozvino.
- Optional valve driver gadziriso yeanosvika gumi nemaviri Danfoss PVG madhiraivha.
- WebGPI™ mushandisi interface.
- Robust electronics inoshanda pamusoro pemhando ye9 kusvika 32 Vdc ine reverse bhatiri, yakaipa yenguva pfupi uye inotakura dump dziviriro.
Application Software
Iyo MC400 yakagadzirirwa kumhanyisa control solution software yakagadziridzwa yemuchina chaiwo. Iko hakuna standard software zvirongwa zviripo. Danfoss ine raibhurari yakakura yezvinhu zvesoftware kubatsira kufambisa chirongwa chekuvandudza software. Izvi zvinosanganisira zvinhu zvekutonga zvemabasa akadai se anti-stall, dual-path control, ramp mabasa uye PID kudzora. Bata Danfoss kuti uwane rumwe ruzivo kana kukurukura nezvechikumbiro chako chaicho.
Kuraira Ruzivo
- Kuti uwane ruzivo rwakakwana rwehardware uye software yekuodha, bvunza fekitori. Iyo MC400 yekuodha nhamba inoratidzira zvese zviri zviviri hardware zvigadziriso uye application software.
- Mating I/O connectors: Chikamu nhamba K30439 (bag assembly ine two 24-pini Deutsch DRC23 series connectors nemapini), Deutsch crimp tool: model number DTT-20-00
- WebGPI™ yekutaurirana software: Chikamu nhamba 1090381.
Technical Data
MAGETSI
- 9-32 Vdc
- Simba rekushandisa: 2 W + mutoro
- Chiyero chepamusoro ikozvino chiyero: 15 A
- External fusing inokurudzirwa
SENSOR SIMBA KUPIWA
- Yemukati yakadzorwa 5 Vdc sensor simba, 500 mA max
COMUNICATION
- RS232
- CAN 2.0b (protocol inotsamira pakushandisa)
STATUS LEDs
- (1) Green system simba chiratidzo
- (1) Green 5 Vdc simba chiratidzo
- (1) Yero modhi chiratidzo (software inogadziriswa)
- (1) Red chimiro chiratidzo (software inogadziriswa)
KURATIDZA UNGASARUDZWA
- 4 hunhu alphanumeric LED inoratidzira iri pachiso cheimba. Kuratidza data kunoenderana nesoftware.
MAONANGANO
- Maviri eDeutsch DRC23 akatevedzana 24-pini yekubatanidza, yega kiyi
- Yakatemerwa 100 yekubatanidza / bvisa ma cycles
- Mating connectors anowanikwa kubva kuDeutsch; imwe DRC26-24SA, imwe DRC26-24SB
EMAmagetsi
- Inomira mapfupi, reverse polarity, pamusoro pevoltage, voltage transients, static charges, EMI/RFI uye load dump
ZVAKAITIKA
- Kushanda Tembiricha: -40°C kusvika +70°C (-40°F kusvika +158°F)
- Kunyorova: Kudzivirirwa kubva ku95% hunyoro hwehukama uye high pressure washdown.
- Vibration: 5-2000 Hz ine resonance inogara kune 1 miriyoni kutenderera kune yega yega resonant point kubva 1 kusvika 10 Gs.
- Shock: 50 Gs ye11 milliseconds. Kukatyamadzwa katatu mumativi ese eatatu akaenzana perpendicular axes kune yakazara 18 kuvhunduka.
- Zvinopinza: - 6 analogi yekupinda: (0 kusvika 5 Vdc). Yakagadzirirwa kupinza sensor. 10-bit A kusvika D sarudzo.
- 6 frequency (kana analog) yekupinda: (0 kusvika 6000 Hz). Inokwanisa kuverenga zvese 2-waya uye 3-waya maitiro ekumhanyisa masensa kana encoder.
Zvinopinza zvinhu zvinogadzirika zvinogona kudhonzwa kumusoro kana kudhonzwa pasi. Zvakare inogona kugadziridzwa seyakajairwa-chinangwa analog yekupinda sezvatsanangurwa pamusoro.
- 9 madhijitari ekuisa: Yakagadzirirwa yekutarisa switch chinzvimbo. Hardware inogadzirika kune yakakwira side kana yakaderera side switching (> 6.5 Vdc kana <1.75 Vdc).
- 4 sarudzo membrane switch: Inowanikwa pachiso chemba. - Zvinobuda:
12 ikozvino inodzorwa PWM zvabuda: Yakagadzirirwa se6 yakakwira side switched pairs. Hardware inogadziriswa kutyaira kusvika ku3 amps imwe neimwe. Maviri akazvimirira PWM frequency anogoneka. Imwe neimwe PWM pair ine zvakare sarudzo yekugadziriswa semaviri akazvimirira voltage referensi zvinobuda zvekushandisa neDanfoss PVG akatevedzana proportional control mavharuvhu kana semaviri akazvimirira ePWM akabuda asina kudzora ikozvino. - 2 yakakwirira ikozvino 3 amp zvinobuda: Pamwe ON/OFF kana pasi pePWM control pasina mhinduro iripo.
Dimensions
Danfoss inokurudzira kuisirwa kwakajairwa kwemutongi kuti ive mundege yakatwasuka ine majoini akatarisa pasi.
Chidimbu Pinouts
| A1 | Bhatiri + | B1 | Nguva Yekupinda 4 (PPU 4)/Analog Input 10 |
| A2 | Digital Input 1 | B2 | Nguva Yekupinda 5 (PPUS) |
| A3 | Digital Input 0 | B3 | Sensor Power +5 Vdc |
| A4 | Digital Input 4 | B4 | R5232 Pasi |
| A5 | Kubuda kwevharuvhu 5 | 65 | RS232 Transmit |
| A6 | Bhatiri - | 66 | RS232 Gamuchira |
| A7 | Kubuda kwevharuvhu 11 | B7 | UNOGONA Kuderera |
| A8 | Kubuda kwevharuvhu 10 | B8 | UNOGONA Kukwirira |
| A9 | Kubuda kwevharuvhu 9 | B9 | Bootloader |
| A10 | Digital Input 3 | B10 | Digital Input 6 |
| A11 | Kubuda kwevharuvhu 6 | B11 | Digital Input 7 |
| A12 | Kubuda kwevharuvhu 4 | B12 | Digital Input 8 |
| A13 | Kubuda kwevharuvhu 3 | B13 | CAN Shield |
| A14 | Kubuda kwevharuvhu 2 | B14 | Nguva Yekupinda 3 (PPU 3)/Analog Input 9 |
| A15 | Digital Output 1 | 615 | Analog Input 5 |
| A16 | Kubuda kwevharuvhu 7 | B16 | Analog Input 4 |
| A17 | Kubuda kwevharuvhu 8 | 617 | Analog Input 3 |
| A18 | Bhatiri + | 618 | Analog Input 2 |
| A19 | Digital Output 0 | B19 | Nguva Yekupinda 2 (PPU2)/Analog Input 8 |
| A20 | Kubuda kwevharuvhu 1 | B20 | Nguva Yekupinda 2 (PPUO)/Analog Input 6 |
| A21 | Digital Input 2 | B21 | Nguva Yekupinda 1 (PPUI)/Analoq Input 7 |
| A22 | Digital Input 5 | B22 | Sensor Gnd |
| A23 | Bhatiri- | B23 | Analog Input 0 |
| A24 | Kubuda kwevharuvhu 0 | B24 | Analog Input 1 |
Zvigadzirwa zvatinopa:
- Bent Axis Motors
- Yakavharwa Circuit Axial Piston Mapombi uye Motors
- Displays
- Electrohydraulic Power Steering
- Electro hydraulics
- Hydraulic Power Steering
- Integrated Systems
- Joystick uye Kudzora Mabatiro
- Microcontrollers uye Software
- Vhura Circuit Axial Piston Mapombi
- Zvigadzirwa zveOrbital Motors
- PLUS+1® GUIDE
- Proportional Mavharuvhu
- Sensors
- Kufambisa
- Transit Mixer Drives
Danfoss Power Solutions inogadzira pasi rese uye mutengesi wemhando yepamusoro hydraulic uye zvemagetsi zvikamu. Isu tine hunyanzvi hwekupa tekinoroji yemazuva ano uye zvigadziriso zvinokunda mumamiriro ekushanda akashata emusika wepamhepo kunze kwemugwagwa. Kuvaka pahunyanzvi hwedu hwekushandisa, tinoshanda pamwe nevatengi vedu kuti tive nechokwadi chekuita kwakasiyana-siyana kune dzakasiyana siyana dzemotokari dziri kunze kwemumugwagwa.
Isu tinobatsira maOEM pasirese kukurumidza kusimudzira masisitimu, kuderedza mitengo uye kuunza mota kumusika nekukurumidza.
Danfoss - Wako Akasimba Mubatsiri muMobile Hydraulics.
Enda ku www.powersolutions.danfoss.com kuti uwane rumwe ruzivo nezvechigadzirwa.
Kwese kwese kwese mota dzemumugwagwa mukuru dziri kubasa, ndizvo zvakaita Danfoss.
Isu tinopa hunyanzvi hwepasirese rutsigiro kune vatengi vedu, kuve nechokwadi chemhinduro dzakanakisa dzekuita kwakanaka. Uye netiweki yakakura yeGlobal Service Partners, isu tinopawo yakazara pasi rose sevhisi kune ese ezvikamu zvedu. Ndokumbira ubate mumiriri weDanfoss Power Solution ari padyo newe.
Comatrol
www.comatrol.com
Schwarzmüller-Inverter
www.schwarzmuellerinverter.com
Turolla
www.turollaocg.com
Valmova
www.valmova.com
Hydro-Gear
www.hydro-gear.com
Daikin-Sauer-Danfoss
www.daikin-sauer-danfoss.com
Kero yenzvimbo
| Danfoss Power Solutions US Kambani 2800 East 13th Street Ames, IA 50010, USA Runhare: +1 515 239 6000 |
Danfoss Power Solutions GmbH & Co. OHG Krokamp 35 D-24539 Neumünster, Germany Runhare: +49 4321 871 0 |
Danfoss Power Solutions ApS Nordborgvej 81 DK-6430 Nordborg, Denmark Runhare: +45 7488 2222 |
Danfoss Power Solutions 22F, Block C, Yishan Rd Shanghai 200233, China Runhare: +86 21 3418 5200 |
Danfoss haigamuchire mutoro wezvikanganiso zvinogona kuitika mumakatalog, mabhurocha uye zvimwe zvakadhindwa. Danfoss inochengetedza kodzero yekushandura zvigadzirwa zvayo pasina chiziviso. Izvi zvinoshandawo kune zvigadzirwa zvagara zvakarongeka chero shanduko yakadaro inogona kuitwa pasina shanduko dzinotevera dziri kudikanwa mune zvakatobvumiranwa.
Ese maratidziro mune ino chinyorwa zvinhu zvemakambani anoenderana. Danfoss uye Danfoss logotype zviratidzo zveDanfoss A/S. Kodzero dzese dzakachengetwa.
BLN-95-9073-1
• Rev BA • Sep 2013
www.vaose.com
© Danfoss, 2013-09
Zvinyorwa / Zvishandiso
 |
Danfoss MC400 Microcontroller [pdf] Bhuku reMushandisi MC400 Microcontroller, MC400, Microcontroller |
