MANHAJAR AIKI
BT-620
Barbashi Counter
Saukewa: BT-620-9800
Rev F
Bayanan Bayani na BT-620
Abubuwan da aka bayar na Met One Instruments, Inc.
1600 NW Washington Blvd.
Tallafin Talla, KO 97526
Waya: 541-471-7111
Facsimile: 541-471-7116
meto.com
Met One Instruments, Inc. yanzu yana cikin rukunin kamfanoni na Acoem na duniya.
Met One Instruments yana ƙira da kera manyan abubuwan meteorological, fahimtar yanayi, da kayan sa ido na ingancin iska tun lokacin da aka kafa shi a cikin 1989. Layin sa na kayan aikin meteorological masu ƙarfi na masana'antu, kayan sa ido na ɓarna iska, da tsarin kula da ingancin iska na cikin gida. saita ma'auni na masana'antu. HeadQirens a cikin tallafin Pass, ko, saduwa da kayan kida, Inc. An yi masa bulala don tabbatar da ci gaba a cikin lafiyar ɗan adam da muhalli yanzu da kuma ƙarni da za su zo.
Acoem ya himmatu wajen taimaka wa kungiyoyi da hukumomin jama'a su sami daidaiton daidaito tsakanin ci gaba da kiyayewa - kiyaye kasuwanci da kadarori da haɓaka dama yayin adana albarkatun duniya. Wanda ke da hedikwata a Limonest, Faransa, Acoem yana ba da na'urori masu auna firikwensin AI da ke da ikon yin aiki tare da yanayin muhalli waɗanda ke ƙarfafa abokan cinikinmu don yanke shawara mai haske dangane da ingantattun bayanai da kan lokaci.
A cikin 2021, Acoem ya sami Haɗuwa da Kayan Aiki, wanda ke nuna muhimmin lokaci lokacin da shugabannin masana'antu biyu a cikin sassan sa ido kan ingancin iska suka haɗu - ƙirƙirar guda ɗaya, mai ƙarfi kuma mai mai da hankali kan gaba don samar da cikakkiyar hanyoyin sa ido kan muhalli. Yanzu, Haɗuwa da Kayan Aiki ɗaya wanda Acoem ke ƙarfafawa ya buɗe sabbin damar ta hanyar ba da babbar gudummawa ta jagorar aji, sa ido kan muhalli da yawa da kuma amintattun masana'antu. Waɗannan tsarin ma'auni masu haɗaka, fasaha, da ayyuka suna ba da cikakkiyar mafita don aikace-aikace iri-iri, gami da binciken muhalli, bin ka'ida, da amincin masana'antu da tsabta.
Don ƙarin bayani game da Haɗuwa Daya Instruments Powered by Acoem, da fatan za a ziyarci: meto.com
Don ƙarin bayani game da Acoem, da fatan za a ziyarci: acoem.com
BT-620 Manual Operation – © Copyright 2023 Met One Instruments, Inc. Duk haƙƙin mallaka a duk duniya. Ba wani ɓangare na wannan ɗaba'ar da za'a iya sake bugawa, aikawa, rubutawa, adanawa cikin tsarin dawo da bayanai, ko fassara zuwa kowane harshe ta kowace hanya ba tare da takamaiman rubutacciyar izinin Met One Instruments, Inc.
Saukewa: BT-620-9800
Sanarwa na Haƙƙin mallaka
Bayanan Bayani na BT-620
© Copyright 2023 Met One Instruments, Inc. Duk haƙƙin mallaka a duk duniya. Ba wani ɓangare na wannan ɗaba'ar da za a iya sake bugawa, aikawa, rubutawa, adanawa a cikin tsarin dawo da bayanai, ko fassara zuwa kowane harshe ta kowace hanya ba tare da takamaiman izini na Met One Instruments, Inc.
Goyon bayan sana'a
Idan kuna buƙatar tallafi, da fatan za a tuntuɓi buƙatun takaddun ku ko na mu webshafin www.metone.com don warware matsalar ku. Idan har yanzu kuna fuskantar wahala, zaku iya tuntuɓar wakilin Sabis na Fasaha yayin lokutan kasuwanci na yau da kullun:
7:00 na safe zuwa 4:00 na yamma. Lokacin Pacific, Litinin zuwa Juma'a.
Murya: 541-471-7111
Fax: 541-471-7116
Imel: service.moi@acoem.com
Wasika: Sashen Sabis na Fasaha
Abubuwan da aka bayar na Met One Instruments, Inc.
1600 NW Washington Blvd.
Tallafin Talla, KO 97526
SANARWA
HANKALI- Amfani da sarrafawa ko gyare-gyare ko aiwatar da hanyoyin wasun waɗanda aka kayyade anan na iya haifar da hasashe mai haɗari.
GARGADI- Wannan samfurin, idan an shigar da shi yadda ya kamata da sarrafa shi, ana ɗaukarsa samfurin Laser Class I. Ba a ɗaukar samfuran Class I a matsayin masu haɗari.
Babu sassan sabis na mai amfani da ke cikin murfin wannan na'urar.
Kada kayi ƙoƙarin cire murfin wannan samfurin. Rashin bin wannan umarni na iya haifar da fallasa ga hasken Laser na bazata.
Gabatarwa
BT-620 na'ura ce mai ɗaukuwa mai ɗaukar iska mai ɗaukuwa tare da ƙaramin tsayayyen sawun ƙafa. Wannan yana ba ka damar motsa shi da kuma saita shi maimakon riƙe shi a hannunka yayin sampling. Babban hali backlit LCD nuni yana ba da sauƙi viewdaga nesa
fiye da mita 3.
Wasu mahimman abubuwan sun haɗa da:
- Girman barbashi 6 (Tsaffin: 0.3, 0.5, 1.0, 2.0, 5.0 da 10 µm)
- Saitunan girman mai amfani (matakai 0.1µm daga 0.3 zuwa 2µm, matakan 0.5µm daga 2 zuwa 10µm)
- 2 da aka fi so (gami da iyakokin ƙararrawa da fitarwa na analog)
- Kwafi bayanai zuwa sandar ƙwaƙwalwar ajiyar USB
- Akan Firintar allo
- Serial sadarwa (Ethernet, USB, RS232, RS485)
- Fakitin baturi na ciki don aiki mai ɗaukuwa.
Saita
Sassan da ke biyowa sun haɗa da buɗewa, shimfidawa da yin gwajin gwaji don tabbatar da aiki.
1.1. Ana kwashe kaya
Lokacin zazzage BT-620 da na'urorin haɗi, duba kwalin don lalacewa ta zahiri. Idan katon ya lalace sanar da mai ɗauka. Cire kaya da duba abubuwan da ke cikin kwandon jigilar kaya.
Ana jigilar BT-620 tare da daidaitattun abubuwa da aka nuna a Hoto 1. Tuntuɓi mai kaya idan wani abu ya ɓace. Hoto na 2 yana nuna kayan aikin zaɓi waɗanda za'a iya siya daban.
1.2. Layout
Hoto na 3 yana nuna tsarin BT-620 kuma tebur mai zuwa yana ba da bayanin abubuwan da aka gyara.
| Bangaren | Bayani |
| Nunawa | 4X20 LCD nuni (baya) |
| Allon madannai | 8 makullin membrane |
| Mai bugawa | Akan Firintar thermal Board |
| Canjin Wuta | Canja wanda ke kunna ko kashe BT-620 (sama don kunnawa). |
| Caja Jack | Jack ɗin shigarwa don cajar baturi. Wannan jack ɗin yana cajin fakitin baturi na ciki kuma yana ba da ƙarfin aiki mai ci gaba ga naúrar. |
| Bututun shiga | Bututun shigar da iska na yanayi. Haɗa bincike na isokinetic don rage tashin hankali a cikin iska sample. |
| Mai Haɗin T/RH | Mai haɗa mating don na'urar firikwensin zafin waje/RH na zaɓi. |
| USB I/O | USB sadarwa tashar jiragen ruwa |
| USB Flash Drive | Fitar da sampda bayanai zuwa kebul na memory stick |
| RS-232 Serial Port | Haɗin da aka yi amfani da shi don sadarwar serial |
| RS-485 Serial Port | Haɗin da ake amfani da shi don dogon nisa (ƙafa 4,000) ko digo-dimbin yawa (raka'a 32) |
| Ethernet Port | Haɗin Ethernet |
| Analog daga | Tashoshin fitarwa na analog guda biyu (0-5V = 0 - FS Counts). FS (Full Scale) ana iya saita shi daga ƙidaya 0 zuwa 9,999,999. |
1.3. Default Saituna
BT-620 ya zo tare da saitunan mai amfani da aka saita kamar haka.
| Siga | Daraja |
| Sampda Wuri | 1 |
| Sampda Mode | Single |
| Sampda Lokaci | 60 seconds |
| Sampda Rike Time | 0 seconds |
| Ƙidaya Raka'a | CF |
| Raka'a Zazzabi | C |
| Baud Rate | 9600 |
| Fitar Serial | Saukewa: RS-232 |
1.4. Aiki na farko
Kafin yin aiki da BT-620 a karon farko, ana ba da shawarar cewa a cika naúrar. Ana samun bayani game da cajin baturi a Sashe na 0. Cika waɗannan matakai don tabbatar da aiki mai kyau.
- Latsa saman maɓallin wuta don kunna wuta.
- Lura da Startup Screen na tsawon daƙiƙa 2 sannan Operate Screen (Sashe na 3.2)
- Danna Maɓallin Fara / Tsaida. BT-620 za a iya amfani da suample don minti 1 kuma tsaya.
- Kula da kirga akan nuni
- Yi amfani da kiban sama / ƙasa zuwa view sauran masu girma dabam
- An shirya naúrar don amfani.
Interface mai amfani
Maɓallin mai amfani na BT-620 ya ƙunshi faifan maɓalli 8 da nuni LCD. Tebu mai zuwa yana bayyana ayyukan faifan maɓalli.
Lura: Wasu maɓallai suna da ayyuka fiye da ɗaya.
| Maɓalli | Bayani |
 |
· Fara ko tsayawa kamarample (Aikin ko Babban Allon Menu). · Fara Canja wurin bayanan USB (Kwafi zuwa Allon Driver USB). · Fara bugu bayanai (Allon Bayanan Buga). · Yana Tunawa da zaɓaɓɓun bayanan (Allon Tuna Bayanan). |
 |
· Load da Data Menu Screen. |
 |
· Yana Load da Babban Menu. · Yana Load da Allon Aiki lokacin da yake cikin Babban Allon Menu. · Soke gyara. Yana mayar da filin zuwa ainihin ƙimar kafin fara gyarawa. |
 |
· Yana loda allo mai alaƙa da abun menu. · View tarihi lokacin da aka nuna Operate Screen. · Yana dakatar da gyara filin kuma yana adana ƙimar da aka canza. |
 |
· Yana kewaya sama / ƙasa lokacin da ba a gyarawa. · Yana gyara filin lokacin gyarawa. |
 |
· Kewaya hagu/dama |
Aiki
Sassan da ke gaba sun rufe ainihin aiki.
3.1. Ƙarfin Ƙarfi
Ana sarrafa wutar lantarki ta BT-620 ta hanyar sauyawa da ke bayan naúrar. Don kunna naúrar matsar da mai kunnawa zuwa wurin kunnawa (sama).
Allon farko da aka nuna akan wutar lantarki shine Allon farawa (Hoto 4). Wannan allon yana nuna nau'in samfurin da kamfani website na kusan dakika 2 kafin a loda allon aiki.
3.2. Aikin Printer
Idan babu takarda da aka ɗora a cikin firinta, hasken mai nuna alama a ƙasan dama na firinta zai haskaka orange. Don loda takarda a cikin firinta, ɗaga latin ƙofar firinta daga tsakiya har zuwa buɗe kofa.
Sanya takarda nadi a cikin ma'ajin bugawa tare da ƙarshen kyauta kuma yana fitowa daga bayan nadi. Rufe ƙofar firinta kuma koren mai nuna alama ya kamata yayi haske. Danna farar maballin akan firinta don ciyar da takarda da hannu. Dubi Sashe na 4.4.4 don Aiki na Printer.
3.3. Aiki Allon
Allon aiki yana nuna kwanan wata/lokaci, sample hali, halin yanzu sample data da kuma baya sampda data. Hoto na 7 yana nuna allon aiki.
Babban layi na Allon aiki an tanada shi don rubutu na yau da kullun (kwanaki, lokaci da wuri) ko saƙon matsayi/ ƙararrawa dangane da matsayin injin. Babban layin ya kasance a tsaye yayin da sauran layin 3 ke gungurawa don nuna cikakken jeri. Bayanan Temp/RH zai bi bayanan ƙidaya lokacin da aka haɗa binciken RH/Temp.
Allon aiki kullum yana nuna girman barbashi 6; duk da haka, BT-620 kuma yana ba da yanayin Favorites wanda ke saita naúrar don nunawa da buga kowane biyu na daidaitattun masu girma dabam shida (duba Sashe na 3.3.1).
Ƙididdigar barbashi za a iya zabar mai amfani. Zaɓuɓɓukan sun haɗa da: Jimlar ƙididdiga (TC), barbashi a kowace lita (/L), barbashi kowace ƙafa mai siffar sukari (CF) da kuma barbashi a kowace mita mai cubic (M3). Za a iya nuna zafin yanayi a cikin raka'a na Celsius (C) ko Fahrenheit (F). Dukkan saitunan naúrar an tattauna su a Sashe na 4.2.4.
3.3.1. Abubuwan da aka fi so
Saitin abubuwan da aka fi so yana kawar da buƙatar gungurawa nuni yayin sa ido kan masu girma dabam guda biyu (duba Sashe 4.4). Saitin Favorites yana daidaita nuni da firinta don masu girma biyu duk da haka BT-620 har yanzu yana ƙididdigewa kuma yana ɗaukar duk girman barbashi shida. SampAna samun bayanan duk tashoshi shida ta tashar tashar jiragen ruwa (Sashe na 0) ko ta hanyar viewtarihin ƙidaya akan nuni (Sashe 3.3.4). Hoto 8 yana nuna Allon Ayyukan da aka Fi so tare da binciken RH/Temp.
3.3.2. Sampling
Allon aiki yana nuna s na yanzuample bayanin lokacin da naúrar ta kasance sampling (bayanai na ainihi). Ƙimar tattarawa (/L, CF, M3) sun dogara da lokaci don haka waɗannan ƙimar za su iya canzawa da wuri a cikin s.ample; duk da haka, bayan daƙiƙa da yawa ma'aunin zai daidaita. Mai tsayi samples (misali 60 seconds) zai inganta daidaito aunawa. Hoto na 9 yana nuna Allon Aiki yayin sampling tare da RH/Temp bincike haɗe.
3.3.3. Sampda Hali
Babban layi na Operate Screen yana nuna matsayin BT-620 yayin da naúrar ke sampling. Tebu mai zuwa yana nuna saƙon matsayi iri-iri da ma'anarsu:
| Matsayi | Bayani |
| FARA… | Farawa sample da jiran tsarin ƙidaya don farawa. |
| KISSARA… 58 | BT-620 kuampling. Lokacin da ya rage yana nunawa zuwa dama mai nisa. |
| RIKO…10 | BT-620 yana cikin yanayin atomatik kuma yana jiran lokacin riƙewa don gamawa. Lokacin da ya rage yana nunawa zuwa dama mai nisa. |
3.3.4. Sampda Tarihi
Sample tarihi (bayanan da suka gabata) na iya zama viewed akan Allon aiki lokacin da aka dakatar da naúrar (ba sampling). Zuwa view sampDon tarihin, danna maɓallin Shigar daga allon aiki. Naúrar zata nuna ƙarshen sample taron (sabuwar rikodin) da nuna "←" a gefen dama na nuni (duba Hoto 10) don nuna bayanan tarihi. Danna ◄ ko } don matsawa ta hanyar samptarihin rikodin rikodi ɗaya lokaci guda (◄ yana nuna tsofaffin al'amuran, } yana nuna sabbin al'amura). Danna maɓallin Shigar a kowane lokaci don komawa kan Allon aiki. Danna Fara a kowane lokaci don fara sabon sample.
Samptarihin zai nuna tashoshi 2 a yanayin Favorites. Zuwa view wasu tashoshi, canza girman da aka fi so ko kashe yanayin Favorites (Sashe na 4.4) kafin ku view tarihi.
3.3.5. Gargaɗi / Kurakurai
BT-620 yana nuna saƙon faɗakarwa/kuskure akan saman layin Allon Aiki.
Waɗannan saƙonnin suna musanya tare da taken kwanan wata/lokaci na yau da kullun. Tebu mai zuwa yana lissafin saƙonnin gargaɗi/kuskure:
| Nuna Saƙo | Bayani |
| Ƙididdigar ƙararrawa. Ƙididdiga shine >= iyakar ƙararrawa. | |
| KARANCIN BATIRI! | Ƙarancin gargaɗin baturi. Kasa da mintuna 15 na aikin al'ada saura. Yi cajin baturi |
| KUSKURE YAKE! | A sampAdadin kwarara ba ya cikin +/- 10% na ƙimar kwararar CFM mara kyau. |
| KUSKUREN SENSOR! | Kuskuren firikwensin barbashi. |
3.4. Sampda Ayyuka masu dangantaka
Ƙananan sassan da ke gaba sun rufe BT-620 sampda related ayyuka.
3.4.1. Farawa/Tsayawa
Don farawa ko tsayawa kamarample, danna maɓallin START/STOP. A sampAna iya farawa ko dakatar da taron da hannu daga ko dai Operate Screen ko babban menu.
3.4.2. Fitowar Lokaci na Gaskiya
BT-620 yana ba da fitarwa na ainihi akan tashar tashar jiragen ruwa a ƙarshen kowane sample. Ana sarrafa tsarin fitarwa ta hanyar Serial Output saitin (Sashe 4.4).
3.4.3. Sampda Mode
A sampyanayin yanayin yana sarrafa guda sample ko ci gaba sampling. Saitin Single yana saita naúrar don s guda ɗayaample. Saitin Maimaitawa yana saita naúrar don ci gaba da sampling. Shigar da lambar sample da sampda n samples da tsayawa.
3.4.4. Sampda Lokaci
A samplokacin yana ƙayyade adadin lokacin da aka tara. Tsawon sample shine saita mai amfani daga 1 - 9999 seconds kuma an tattauna a cikin sashe na 4.2.2.
3.4.5. Rike Lokaci
Ana amfani da lokacin riƙewa lokacin da sampan saita yanayin don maimaitawa (ci gaba da sample) ko adadin samples mode. Lokacin riƙewa yana wakiltar lokacin daga ƙarshen s na ƙarsheample zuwa farkon s na gabaample. Lokacin riƙewa shine saita mai amfani daga 0 - 9999
seconds kuma an tattauna a cikin sashe na 4.2.3.
3.4.6. Sampda Lokaci
Alkaluman da ke gaba suna kwatanta sample jeri na lokaci na guda biyu da maimaita samphanyoyin ling. Hoto na 11 yana nuna lokacin sampda mode. Hoto na 12 yana nuna lokacin maimaita sampda mode.
Ana samun dama ga Babban Menu ta danna maɓallin menu akan Allon Aiki. Teburin da ke ƙasa yana nuna Babban Menu. Danna ▲ ko ▼ don kewayawa zuwa abin menu sannan danna Shigar don nuna allo inda zaka iya. view ko canza saitin abu.
| Abun Menu | Bayani | Latsa Shigar don kewaya zuwa… |
| SAMPLE SETUP | View / canza lambar wuri, atomatik / Yanayin guda ɗaya, sampda lokaci da ɗaukar lokaci. | SampAllon Saita |
| STINGS | View / canza girma (ƙidaya raka'a) da zafin jiki raka'a ºC / ºF. | Allon Saituna |
| SERIAL | View / canza Serial Report nau'in, Baud Rate, serial yanayin da Flow Control. | Serial Screen |
| BUHARI | View Canja saitin kunna firinta | Allon Printer |
| ABINDA SUKA FI SO | Saita iyakoki na ƙararrawa don girman barbashi 2 | Allon Ƙararrawa |
| SATA GIRMA | Saita girman barbashi | Saita Allon Girma |
| CALIBRATE FUSKA | Calibrate da sample kwarara kudi | Fuskar allo |
| SATA Agogo | Saita kwanan wata da lokaci. | Saita Allon agogo |
| SATA KWANTA | Daidaita bambancin nuni. | Saita Allon Kwatance |
| Kalmar sirri | View/ Saita kalmar sirrin mai amfani. | Allon kalmar sirri |
| GAME DA | Nuna sigar firmware da lambar serial. | Game da Screen |
4.1. Shirya Babban Abubuwan Menu
Don canza saitunan, danna Menu don nuna Babban Menu, danna ▲ ko ▼ don kewaya zuwa abin da ake so kuma danna Shigar don nuna abun. view/ gyara allo.
Don shirya abubuwan da aka zaɓa (misali Sample Saita – Single/Maimaitawa), latsa ▲ ko ▼ don kewaya abun. Latsa Shigar don zaɓar abu. Danna ▲ ko ▼ don canza saitin. Latsa ENTER don ajiye saitin ko ESC don sokewa da komawa zuwa babbar ƙima.
Don shirya ƙimar lambobi (misali ƙidaya Ƙararrawa - Ƙimar Ƙararrawa), danna ▲ ko ▼ don kewaya zuwa abu. Latsa Shigar don zaɓar abu. Latsa ▲ ko ▼ don ƙarawa ko rage ƙima. Latsa ◄ ko } don zaɓar lamba ta gaba. Latsa ENTER don ajiye ƙima ko ESC don sokewa da komawa zuwa ainihin ƙimar.
Lura: Idan an saita kalmar wucewa ta mai amfani, dole ne a shigar da kalmar sirrin mai amfani don samun dama ga babban menu.
4.2. SampAllon Saita
Hoto na 14 yana nuna SampAllon Saita. An rufe sigogi 4 a cikin sassan masu zuwa.
4.2.1. Lambar Wuri
Ana amfani da lambar wurin don sanya lamba ta musamman zuwa wuri ko yanki. Wannan muhimmin filin yana cikin sample data records (nuni, printer da serial fitarwa).
4.2.2. Sampda Lokaci
A samplokacin yana ƙayyade adadin lokacin da aka ƙidaya yayin da famfo ke gudana. Tsawon sample shine saita mai amfani daga 1 - 9999 seconds.
4.2.3. Rike Lokaci
Lokacin Riƙe shine lokacin tsakanin sampda lokacin sampling a cikin Maimaita yanayin (ci gaba) ko adadin samples mode. Lokacin Riƙe shine saita mai amfani daga 0 - 9999 seconds. Famfu zai kasance a kunne yayin lokacin riƙon idan lokacin Riƙe ya kasance daƙiƙa 60 ko ƙasa da haka. Ruwan famfo zai tsaya bayan kowace sample, kuma fara ƴan daƙiƙa kaɗan kafin s na gabaample, idan Riƙe lokacin ya fi 60 seconds. Lokacin riƙewa sama da daƙiƙa 60 zai ƙara rayuwar famfo.
4.2.4. Samples
A sampsaitin yana sarrafa adadin sampdon ɗauka kamar yadda aka kwatanta a ƙasa.
| Zabi | Bayani |
| Maimaita | Maimaita yana saita naúrar don ci gaba da sampling. |
| GUDA GUDA | Single yana saita naúrar don s guda ɗayaample. |
| 002-9999 | Yana saita naúrar don ɗaukar N samples. |
4.3. Allon Saituna
Hoto na 15 yana nuna Allon Saituna. An rufe sigogi 4 a cikin sassan da ke biyo baya.
4.3.1. Ƙidaya Raka'a
BT-620 yana goyan bayan jimlar ƙidayar (TC), barbashi a kowace lita (/L), barbashi a kowace ƙafa mai siffar sukari (CF) da barbashi a kowace mita mai siffar sukari (M3). Ana sabunta bayanan kirga barbashi yayin da naúrar ke sampling. Ƙimar tattarawa (/L, CF, M3) sun dogara da lokaci don haka waɗannan ƙimar
na iya canzawa da wuri a cikin sample; duk da haka, bayan daƙiƙa da yawa ma'aunin zai daidaita. Mai tsayi samples (misali 60 seconds) zai inganta daidaito aunawa.
4.3.2. Zazzabi
BT-620 yana nuna zafin jiki a Celsius (C) ko Fahrenheit (F).
4.4. Serial Screen
Hoto 16 – Serial Screen yana nuna Serial Screen. An rufe sigogi 4 a cikin sassan da ke biyo baya.
4.4.1. Nau'in Rahoton
Saitin rahoton yana ƙayyade tsarin fitarwa don Serial Port. Zaɓuɓɓukan babu, CSV da PRINTER.
Lokacin da aka saita zuwa BABU, naúrar ba za ta fitar da karatun ta atomatik ba a ƙarshen sampzuwa Serial Port. CSV sigar fitarwa ce ta Wakafi Rabe da ta dace don shigo da cikin maƙunsar rubutu. PRINTER tsari iri ɗaya ne da firinta da aka ɗora akan allo.
Wannan saitin baya shafar firinta da aka ɗora wanda ko da yaushe ke bugawa cikin tsarin PRINTER.
4.4.2. Baud Rate
Yi amfani da zaɓin Baud Rate don saita ƙimar baud ɗin sadarwar serial. BT-620 yana sadarwa a farashin baud daga 300 - 115200.
4.4.3. Yanayin Fitar Serial
Saitin Serial Out yana sarrafa halayen fitowar serial na BT-620. Hanyoyin su ne RS232, RS485, Printer ko Network (duba Sashe na 0 don tsarin sadarwar serial). Tebur mai zuwa yana lissafin saitunan Serial Output kuma yana bayyana ma'anar su.
| Serial Out Saitin | Bayani |
| Saukewa: RS232 | RS232/USB sadarwa. |
| Saukewa: RS485 | Saukewa: RS485. |
| NETWORK | RS485 sadarwa tare da duk serial fitarwa an kashe sai dai in musamman magana. |
4.4.4. Gudanar da Yawo
An saita saitin Sarrafa Guda zuwa BAYA don yawancin aikace-aikacen tashar tashar jiragen ruwa na USB na RS-232. Ana iya saita wannan saitin zuwa RTS/CTS don musaɓawar kayan masarufi lokacin amfani da tashar tashar Ethernet. Hakanan dole ne a saita ƙimar baud da saitunan sarrafa kwarara don dacewa a cikin saitin katin Ethernet na Netburner don haɗin Ethernet.
4.5. Allon Printer
Hoto na 17 yana nuna Allon Printer.
4.5.1. Printer
Saitin Printer yana zaɓar ko don kunna ko kashe firinta da aka ɗora don fitarwa ta atomatik a ƙarshen kowane s.ample. Fannin da aka ɗora firinta koyaushe yana bugawa a cikin sigar firinta ba tare da la'akari da sigar fitarwa ta Serial ba.
4.6. Allon da aka fi so
Yanayin da aka fi so yana kawar da buƙatar gungurawa nuni yayin sa idanu masu girma biyu marasa kusa. Yanayin Favorites kuma yana ba da iyakokin ƙidayar ƙararrawa da sikelin fitarwa na analog don Favorites (tashoshi ƙidaya 2). Yanayin Favorites yana sarrafa nuni (ainihin lokaci da tarihi) da tsarin firinta. Fitowar serial na CSV ya ƙunshi duk girman 6. Hoto 18 - Abubuwan da aka fi so suna nuna allon Favorites.
4.6.1. Yanayin Da Aka Fi so (ON/KASHE)
Yana kunna ko yana hana yanayin Favorites (A kunne = An kunna, Kashe = An kashe).
4.6.2. Girman Abubuwan da aka Fi so (SIZE)
Zaɓi 2 daga daidaitattun 6 ko masu girma dabam. Fi so 1 shine 0.3 µm a hoto na 18 (a sama).
4.6.3. Iyakar ƙararrawa da aka fi so (ALARM)
Abubuwan da aka fi so suna ƙirga iyakar ƙararrawa. Ƙimar sifili (0) tana kashe ƙararrawar ƙidayar. Ƙararrawar tana aiki lokacin da ƙidayar ta kasance daidai ko girma fiye da iyakar ƙararrawa. Matsakaicin iyakar ƙimar ƙararrawa shine 9,999,999.
Ƙimar ƙararrawa ba sa canzawa tare da saitin raka'a (TC, /L, CF, M3). A wasu kalmomi, ƙimar 1,000 za ta yi ƙararrawa a ƙidaya 1,000 ko barbashi 1,000 a kowace ƙafar cubic ko barbashi 1,000 a kowace lita dangane da saitin naúrar.
4.6.4. Abubuwan da aka fi so Analog Output Scaling (A-SCALE)
Abubuwan da aka fi so na fitowar analog (0 - 5 volts = 0 - VALUE). Matsakaicin ƙimar ƙimar shine 9,999,999. Ƙimar sifili (0) za ta saita fitarwa na analog don ƙararrawa na dijital ko binary (0 volts = al'ada, 5 volts = ƙararrawa). An saita iyakar ƙararrawa don wannan yanayin binary a cikin Sashe na 4.6.3 na sama.
Hoto na 19 yana nuna ayyukan fitilun mahaɗan fitarwa na analog. G fil sune ƙasan sigina. 1 da 2 sune Analog Output 1 da Analog Output 2 waɗanda ke da alaƙa da Favorite 1 da Favorite 2 bi da bi (duba Sashe na 4.6.2).
4.7. Calibrate Flow Screen
BT-620 yana da ƙimar kwararar masana'anta na 1 CFM (28.3 LPM). A ƙarƙashin yanayi na al'ada, tsarin sarrafa kwararar haɗe-haɗe zai kula da gudana a cikin +/- 5% na wannan ƙimar kwarara. Yi amfani da hanyar da ke biyowa don daidaita ƙimar kwararar ruwa lokacin da duba ƙimar kwararar lokaci-lokaci (Sashe na 8.1.2) yana nuna kuskuren ƙimar kwarara sama da +/- 5%.
- Haɗa mitar kwararar tunani zuwa madaidaicin shigar da ke saman naúrar.
- Samun dama ga allo Calibrate Flow ta latsa Menu sannan zaɓi Calibrate Flow. Famfu zai fara ta atomatik lokacin da ka shigar da Calibrate Flow allon kuma tsayawa lokacin da ka bar allon. Tsarin zai jira dakikoki da yawa don kwararar ta daidaita. A wannan lokacin, naúrar zata nuna "Jira..."
- Bayan haka, yi amfani da maɓallan kibiya na sama da ƙasa don daidaita magudanar ruwa har sai mitar kwararar bayanai ta karanta cikin haƙuri. Kuna buƙatar jira ƴan daƙiƙa kaɗan bayan kowane daidaitawa don tsarin kwarara da mita don daidaitawa. Hoto na 20 yana nuna tsohonampna Calibrate Flow Screen.
- Lokacin da adadin kwararan da ake so ya kai, danna ENTER don saita daidaitawa.
- Fita allo na Calibrate Flow ta latsa maɓallin ESC (famfo zai tsaya).
4.8. Saita Allon Girma
A BT-620 yana da shida misali factory calibrated barbashi masu girma dabam. Waɗannan madaidaitan masu girma dabam za su goyi bayan mafi yawan aikace-aikace kuma suna samar da mafi girman daidaiton girman (+/- 10%). Wannan naúrar kuma tana goyan bayan girman al'ada. Ana saita waɗannan masu girma dabam ta amfani da Allon Saita Girman Girma (Hoto na 21). Matsakaicin girman na al'ada suna tsaka-tsaki ta amfani da daidaitaccen madaidaicin madaidaicin girman girman. Saboda haka, an rage daidaiton girman girman girman al'ada (+/- 15%).
Naúrar tana tsara masu girma dabam daga ƙanana zuwa babba bayan kowane canjin girman. Ba a yarda da kwafi masu girma dabam. Duk wani ƙoƙari na saita masu girma biyu ko fiye zuwa ƙima ɗaya zai haifar da "DUPLICATE SIZES!" sakon gargadi.
4.9. Saita Allon agogo
Don saita kwanan wata da lokaci zaɓi SET CLOCK daga menu. Hoto na 22 yana nuna Saitin Agogon Agogon kuma tebur mai zuwa yana bayyana tsarin kwanan wata da lokaci.
| Tsarin Kwanan wata / Lokaci | ||
| Kwanan wata | dd mmm | dd=rana, mmm=wata, yy=shekara |
| Lokaci | h:mm:ss | Hh= hours, mm=minutes, ss= seconds |
4.10. Saita Allon Kwatance
Danna ◄ ko } don inganta ingancin nuni. Latsa Shigar don ajiye saitin ko ESC don soke canjin. Hoto na 23 yana nuna Saitin Adadin Allon.
4.11. Allon kalmar sirri
Saitunan mai amfani a cikin BT-620 za a iya kiyaye kalmar sirri don hana shiga mara izini. Wannan yana taimakawa kiyaye amincin bayanan.
Ana amfani da allon saitin PASSWORD don saiti, canzawa, ko cire kalmar sirri mai lamba 4 da ake amfani da ita don takura wa waɗannan wuraren gami da menu na saitin. Tsohuwar kalmar sirri ita ce 0000. Wannan yana kashe kalmar sirri kuma yana ba da damar shiga mara iyaka zuwa duk ayyukan sarrafa kalmar sirri.
Idan kalmar sirri ta canza zuwa kowace ƙima tsakanin 0001 da 9999, daga baya za a buƙaci don samun dama ga waɗannan allon.
4.12. Game da Screen
Hoto na 25 yana nuna Game da allo. Game da allo yana nuna nau'in firmware da sigar dabaru na shirye-shirye akan layi na biyu. Danna ▲ ko ▼ don kunna tsakanin lambobin sigar guda biyu. Ana nuna lambar serial akan layi na uku.
Don samun damar zaɓuɓɓukan bayanai (kwafi bayanai, view žwažwalwar ajiya akwai, tuno bayanai da buga bayanai), kawai danna maɓallin bayanai don kewaya zuwa allon bayanai. Hoto na 26 yana nuna allon bayanai.
5.1. Kwafi zuwa USB Drive
Hoto na 27 yana nuna Nunin Kwafi Data. BT-620 zai kwafi duk bayanai daga kwanan wata/lokacin da aka nuna zuwa lokacin yanzu. Da farko, kwanan wata/lokaci zai zama farkon sampdon yin rikodin don haka duk bayanan za a kwafi. Don rage lokacin canja wuri, danna Shigar kuma canza kwanan wata/lokaci zuwa kwanan wata/lokaci.
Danna maɓallin Fara don fara aiwatar da kwafin. Danna maɓallin ESC don soke aikin kwafin kuma komawa zuwa menu na bayanai. Ana nuna allon mai zuwa yayin aiwatar da kwafin (Hoto 28).
5.2. Tuna Bayanan
An adana sample events iya zama viewed daga Operate Screen amma wannan yana buƙatar kewaya rikodin lokaci guda don isa ga rikodin da ake so. Allon Data Recall yana ba da hanya don kewaya da sauri zuwa rikodin bisa lokaci. Hoto na 29 yana nuna Allon Bayanan Tunawa.
Don tunawa da bayanai, shigar da kwanan wata/lokacin da ake so kuma zaɓi maɓallin START/TSOP. Ƙungiyar za ta tuna da bayanan daga kwanan wata/lokacin da aka shigar (idan an sami daidai daidai) ko bayanan kwanan nan na gaba da ake samu. Ƙungiyar za ta nuna "←" a gefen dama na nuni don nuna bayanan tarihi.
5.3. Buga Sampda Data
An adana sampZa a iya buga abubuwan da suka faru ta hanyar tashar jiragen ruwa a cikin kewayon da aka zaɓa mai amfani. Don samun damar fasalin bugu, danna maɓallin bayanai sannan zaɓi PRINT DATA daga menu. Hoto na 30 yana nuna Allon Bayanan Buga.
Wannan allon yana bawa mai amfani damar zaɓar ko fitarwa ta tafi zuwa firintar da aka ɗora ko kuma tashar tashar jiragen ruwa. Fannin da aka ɗora firinta koyaushe yana bugawa a cikin tsarin fitarwa na PRINTER. An zaɓi tsarin fitarwa don tashar tashar jiragen ruwa a cikin Serial Screen.
Shirya wuri da kewayon lokaci don zaɓar wanne sample abubuwan da za a buga. Tebur mai zuwa yana bayyana saitunan.
| Saita | Bayani |
| BAYANAN DATA | Zaɓi SERIAL ko PRINTER don inda za a aika fitarwa. |
| LOKACI | ID na wurin sample abubuwan da za a buga. Saita wurin zuwa 000 yana buga duk wurare. Farashin 0-999 |
| 01 JAN'00 | Kwanan wata/lokacin fara bugu sample abubuwan da suka faru daga. |
| 18 ga Agusta 06 | Kwanan wata/lokaci don dakatar da buga samples. |
Bayan an zaɓi saitunan bugawa, danna maɓallin Fara don nuna allon hali. Hoto na 31 yana nuna Allon Matsayin Buga kamar yadda yake gani idan an gama.
Danna maɓallin ESC yana soke bugu na bayanai kuma ya loda menu. Tsarin bugawa ya dogara ne akan saitin rahoton (Sashe 4.2.4).
5.4. Allon ƙwaƙwalwa
Ƙwaƙwalwar BT-620 ta ƙunshi guda ɗaya file wanda ya kunshi bayanai daga sampda events. Duk lokacin da sampLe an kammala, BT-620 yana adana bayanan a cikin ƙwaƙwalwar ajiya. Ƙwaƙwalwar BT-620 madauwari ce, ma'ana lokacin da ƙwaƙwalwar ajiya ta cika, naúrar za ta fara rubuta mafi dadewa da aka ajiye.amples tare da sabo samples. BT-620 yana ba da damar mai amfani view amfani da ƙwaƙwalwar ajiya da kuma share ƙwaƙwalwar ajiya.
5.4.1. View Ƙwaƙwalwar ajiya mai samuwa
Ana amfani da allon ƙwaƙwalwar ajiya don view akwai ƙwaƙwalwar ajiya ko don share ƙwaƙwalwar ajiya. Ana shiga allon ƙwaƙwalwar ajiya ta zaɓi MEMORY daga Menu na Bayanai. Hoto na 32 yana nuna allon ƙwaƙwalwar ajiya.
KYAUTA yana nuna kashi dari na sarari don ajiyar bayanai. Lokacin da aka nuna 0%, ƙwaƙwalwar ajiya ta cika kuma mafi tsufa bayanai za a sake rubuta su ta sabon bayanai. SAMPLES yana nuna adadin sampLes wanda za'a iya adanawa a ƙwaƙwalwar ajiya kafin ƙwaƙwalwar ajiya ta cika. Lokacin da aka nuna 0%, ƙwaƙwalwar ajiya ta cika kuma mafi tsufa bayanai za a sake rubuta su ta sabon bayanai.
5.4.2. Share ƙwaƙwalwar ajiya
Don share ƙwaƙwalwar ajiya, danna maɓallin ENTER yayin viewda Memory Screen. Wannan zai share duk sampabubuwan da suka faru a cikin ƙwaƙwalwar ajiya. Za a nuna allon faɗakarwa don hana gogewa da gangan.
Cajin Baturi
Tsanaki:
An ƙera cajar baturi don yin aiki lafiya tare da wannan na'urar. Kada kayi ƙoƙarin haɗa wani caja ko adaftar zuwa wannan na'urar. Yin hakan na iya haifar da lalacewar kayan aiki.
Don cajin baturi, haɗa cajar baturin zuwa tashar wutar lantarki ta AC da filogi na DC zuwa soket a bayan BT-620. Cajin baturi na duniya ne kuma zai yi aiki da layin wutar lantarki voltag100 zuwa 240 volts, 50 zuwa 60 Hz. LED cajar baturi zai zama Ja yayin cajin Mataki na 1 (constant current). Zai juya Orange yayin Mataki na 2 (voltage). A wannan lokacin, ana cajin baturi 80-95%. LED ɗin zai juya Green 4 hours bayan Farawa na 2.
Lura: Fakitin baturi gabaɗaya za a cika cikakken caji sa'o'i 3 bayan an fara caji.
A wannan gaba, LED zai kasance har yanzu Orange.
Lokacin da cikakken cajin baturi a cikin BT-620 zai kunna naúrar na kimanin sa'o'i 4 na ci gaba da sampling. Karkashin aiki na yau da kullun, baturi zai yi ƙarfin naúrar na kusan awa 8. Don ci gaba da aiki, yi aiki da naúrar tare da haɗe cajar baturi. Yi cajin baturi kafin adana BT-620. Ajiye baturin da aka cire zai lalata aikinsa.
Lura: BT-620 ba zai yi aiki ba tare da shigar da cajin baturi ba.
6.1. Madadin Baturi
Kuna iya siyan kebul na cajin baturi na zaɓi da fakitin baturi mai maye don tsawaita lokacin aikin baturi. Yi amfani da kebul na caji tare da haɗe da cajar baturi don cajin baturin maye gurbin yayin da kake aiki da BT-620 ƙarƙashin ikon baturi.
6.1.1. Don cajin fakitin baturin maye gurbin
- Haɗa kebul ɗin cajin baturi zuwa cajar baturi
- Haɗa baturin maye gurbin zuwa kebul na caji
- Haɗa cajar baturi zuwa tashar AC
- LED cajar baturi zai zama Ja yayin cajin Mataki na 1 (constant current).
Zai juya Orange yayin Mataki na 2 (voltage). A wannan lokacin, ana cajin baturi 80-95%. LED ɗin zai juya Green 4 hours bayan Farawa na 2.
Lura: Fakitin baturi gabaɗaya za a cika cikakken caji sa'o'i 3 bayan an fara caji. A wannan gaba, LED zai kasance har yanzu Orange.
6.1.2. Don maye gurbin fakitin baturi
- Kashe BT-620 wuta
- Cire duk haɗin haɗin panel na baya (cajar baturi, sadarwar serial).
- Tukwici BT-620 baya akan ƙafafu na baya (Hoto #1 a ƙasa).
- Sauke dunƙule mai riƙe da ƙofar baturi (#2).
- Cire ƙofar baturin (#3 & #4).
- Cire fakitin baturi (#5).
- Cire haɗin baturi (#6).
- Haɗa fakitin baturin maye gurbin (#6).
- Sanya wayoyi a hankali yayin da kuke maye gurbin fakitin baturi (#5 & #4).
- Sauya ƙofar baturi (#3).
- Matse magudanar kofar baturi (#2).
- Koma BT-620 zuwa madaidaiciyar matsayi.
Serial Communications
BT-620 yana samar da serial sadarwa ta USB, DB9, RJ45 da kuma tasha block haši dake a bayan naúrar. Sassan da ke gaba suna tattauna hanyoyin sadarwa iri-iri.
HANKALI:
Dole ne a shigar da direban USB kafin haɗa tashar USB ta BT-620 zuwa kwamfutarka. Idan ba a fara shigar da direbobin da aka kawo ba, Windows na iya shigar da direbobin da ba su dace da wannan samfurin ba.
Zazzagewar direba webmahada: https://metone.com/usb-drivers/
Met One Instruments, Inc. kuma yana ba da kayan aikin software na Comet don fitar da bayanai (bayanai, ƙararrawa, saituna, da sauransu) daga samfuran Met One Instruments. An ƙera software ɗin don mai amfani don samun damar bayanai cikin sauƙi a cikin samfur ba tare da sanin ƙa'idar sadarwa ta na'urar ba.
Akwai shirin Comet don zazzagewa daga Instruments Met One website: https://metone.com/products/comet/
7.1. Umarni
BT-620 yana ba da umarnin serial don samun damar bayanan da aka adana da saitunan. Ana ƙare duk umarni ta hanyar dawowar karusar. Hakanan, waɗannan umarnin ba su da mahimmanci. Teburin da ke gaba yana lissafin umarni da ake da su. Ana samun waɗannan umarnin ta USB, RS232 da RS485 musaya na kayan masarufi. Saitunan (ƙididdigar baud, daidaito da tasha) dole ne su dace da saitin kwamfuta don sadarwar da ta dace ba tare da la'akari da nau'in mu'amalar kayan masarufi ba (USB, RS232 ko RS485).
7.1.1. Yanayin Kwamfuta
Yanayin Kwamfuta an yi niyya don haɗa naúrar kai tsaye zuwa mai shigar da bayanai ko shirin kwamfuta kamar Comet. Wannan shine yanayin tsoho na naúrar.
A Yanayin Kwamfuta, duk umarni suna gaba da halayen (ASCII 27). Babu haruffa da aka mayar da martani ga mai amfani lokacin shigar da umarni. Ana aiwatar da duk umarni ta amfani da maɓallin .
Duk lokacin da yana danna maɓalli, naúrar za ta sake saita zuwa Yanayin Kwamfuta kuma ta fara shigar da umarni a kan.
7.1.2. Yanayin mai amfani
An yi nufin Yanayin mai amfani don hulɗar mai amfani kai tsaye. A Yanayin Mai amfani, duk haruffa masu shigowa ana sake maimaita su ga mai amfani.
Mai amfani zai iya tayar da naúrar zuwa Yanayin Mai amfani ta hanyar aika haruffa 3 (Shigar da Maɓalli) a cikin daƙiƙa 3. Za'a nuna wannan alama mai sauri "*" lokacin da naúrar ke cikin Yanayin Tasha.
Naúrar za ta koma Yanayin Kwamfuta bayan mintuna 2 na rashin aiki a tashar tashar jiragen ruwa.
Umurnin Q zai mayar da naúrar nan da nan zuwa Yanayin Kwamfuta.
| Saituna (dole ne su dace da saitunan kwamfuta):
· Ƙimar Baud = Zaɓuɓɓuka (duba Sashe 4.2.4) · Daidaitawa = Babu · Tsaya Bits = 1 |
|
| Umurni | Bayani |
| ?, H | Nuna menu na taimako |
| 1 | Yana dawo da bayanan saitunan raka'a |
| 2 | Yana dawo da duk bayanan da ke akwai daga bayanan file |
| 3 | Yana dawo da duk bayanan tun daga umarnin '2' ko '3' na ƙarshe. |
| 4 | Yana dawo da bayanan n na ƙarshe |
| D | Kwanan wata (mm/dd/YY) |
| T | Lokaci (HH:MM) |
| C | Share bayanai |
| S | Fara kamarample |
| E | Karshen a sample |
| ST | Sampda Lokaci |
| RV | Nuna bita na software. |
| ID | Saita/Samu ID ɗin Wuri. Farashin 1-999. |
| FAx | Saitin iyakar ƙararrawa da aka fi so inda x=1 ko 2 don ƙararrawa 1 ko 2. |
| FSx | Saitin girman da aka fi so inda x=1 ko 2 don Girman Ƙararrawa 1 ko 2 bi da bi. |
| SF | Yanayin da aka fi so. 0=A kashe, 1=A kunne |
| SH | Riƙe Lokaci a cikin daƙiƙa |
| SN | Sampda Number Samples (0= Maimaita) |
| SR | Saita Yanayin Rahoton (0=Babu, 1=CSV, 2=Mai bugawa) |
| SS | Karanta lambar serial |
| CU | Ƙidaya Raka'a (0=CF, 1=/L, 2=TC, 3=M3) |
| TU | Raka'a Zazzabi (0=C, 1=F) |
| RZ | Yana dawo da bayanin Girman Channel. |
| DT | Yana saita Kwanan wata/Lokaci ba tare da hulɗar mai amfani ba (kirtani) |
| OP | Matsayin Aiki. S= Tsayawa, R= Gudu, H= Rike. |
| CS | Saita Girman Tashoshi (duk Girman Tashoshi 6) |
7.2. Real Time Fitowa
Sakamakon ainihin lokacin yana faruwa lokacin da naúrar ta ƙare kamarample. Tsarin fitarwa shine ko dai ƙimar da aka raba waƙafi (CSV) ko salon firinta dangane da yanayin Rahoton Serial.
7.3. Ƙimar Rarraba Waƙafi (CSV)
Filayen fitarwa na CSV duka sun rabu da waƙafi da tsayayyen tsayi.
Shugaban CSV (Lura 1):
Time,Size1,Count1(M3),Size2,Count2(M3),Size3,Count3(M3),Size4,Count4(M3),Size5, Count5(M3),Size6,Count6(M3),AT(C),RH(%),Location,Seconds,Fav1Size,Fav2Size,Status
CSV Exampda Record:
2013-09-30
10:04:05,00.3,08562345,00.5,01867184,00.7,00654892,01.0,00245849,02.0,00055104,05.0,00
031790,*023,040,001,010,00.3,00.5,000
| Filin CSV | |||
| Filin | Siga | Exampda darajar | Bayanan kula |
| 1 | Kwanan wata da Lokaci | 2013-09-30 10:04:05 | |
| 2 | Tashar 1 Girma | 0.3 | |
| 3 | Ƙididdigar tashar 1 (TC, /L, CF, M3) | 8562345 | Bayanan kula 2 |
| 4 | Tashar 2 Girma | 0.5 | |
| 5 | Ƙididdigar tashar 2 (TC, /L, CF, M3) | 1867184 | Bayanan kula 2 |
| 6 | Tashar 3 Girma | 0.7 | |
| 7 | Ƙididdigar tashar 3 (TC, /L, CF, M3) | 654892 | Bayanan kula 2 |
| 8 | Tashar 4 Girma | 1.0 | |
| 9 | Ƙididdigar tashar 4 (TC, /L, CF, M3) | 245849 | Bayanan kula 2 |
| 10 | Tashar 5 Girma | 2.0 | |
| 11 | Ƙididdigar tashar 5 (TC, /L, CF, M3) | 55104 | Bayanan kula 2 |
| 12 | Tashar 6 Girma | 5.0 | |
| 13 | Ƙididdigar tashar 6 (TC, /L, CF, M3) | 31790 | Bayanan kula 2 |
| 14 | Zazzabi (C,F) | 23 | Note 2 & Note 3 |
| 15 | RH (%) | 40 | Bayanan kula 3 |
| 16 | Wuri | 1 | |
| 17 | SampLokacin (0-9999 seconds) | 60 | |
| 18 | Girman da aka fi so 1 | 0.3 | Bayanan kula 4 |
| 19 | Girman da aka fi so 2 | 0.5 | Bayanan kula 4 |
| 20 | Matsayi Bits (duba ƙasa) | 0 | Bayanan kula 5 |
| Matsayi Bits | Bayanan kula (na tebur a sama): | |||
| Bit | Daraja | Sharadi | ||
| 0 | Ok (babu ƙararrawa/kurakurai) | 1. CSV header hada don mahara rikodin canja wurin kamar All Data (2) ko New Data (3). Shugaban CSV baya bugawa a cikin Kwamfuta ko Yanayin hanyar sadarwa. | ||
| 0 | 1 | Ƙidaya girman ƙararrawa 1 | 2. Raka'a ƙaddara ta hanyar saitin samfur. | |
| 1 | 2 | Ƙidaya girman ƙararrawa 2 | 3. Zazzabi da RH za su zama sarari (, , ) idan ba a haɗa binciken Temp/RH ba. | |
| 2 | 4 | Ba a yi amfani da shi ba | 4. Girman da aka fi so zai zama sarari (, , ) idan an kashe ƙararrawa. | |
| 3 | 8 | Ba a yi amfani da shi ba | 5. Haɗin ɗanɗano matsayi yana yiwuwa. Don misaliample, 17 (00010001B) = Karamin Baturi da Girman ƙararrawa 1. | |
| 4 | 16 | Ƙananan baturi | ||
| 5 | 32 | Kuskuren Sensor | ||
| 6 | 64 | Ba a yi amfani da shi ba | ||
| 7 | 128 | Ba a yi amfani da shi ba | ||
7.4. Salon Printer
Tsarin fitarwa na firinta shine layi 9 da haruffa 26 (ciki har da T/RH idan an haɗa su).
7.5. Saukewa: RS485
Ana iya saita naúrar don yin aiki a cibiyar sadarwa ta Multi-Drop RS485 ta amfani da saitin Serial Out akan allon Saituna. Hakanan za'a saita naúrar ta atomatik zuwa yanayin cibiyar sadarwa idan ta gano umarnin hanyar sadarwa ana aika zuwa kowace na'ura a cikin hanyar sadarwar.
Lokacin da naúrar ke cikin yanayin cibiyar sadarwa, ba za ta yi ƙararrakin kowane haruffa ko amsa kowane umarni ba sai in an yi magana ta musamman. Adireshin cibiyar sadarwa iri ɗaya ne da ID ɗin Wuri da aka saita a cikin Sampda Saita allon. Yana da mahimmanci cewa babu raka'a biyu da ke da ID ɗin Wuri ɗaya da aka saita a cikin hanyar sadarwa ɗaya.
Lokacin cikin yanayin cibiyar sadarwa, ana ɗaukar naúrar a ƙarƙashin Ikon Nesa kuma maɓalli na aiki ba zai iya canza su ta hanyar afaretan gida ba. Waɗannan saitunan sune:
Sampda Mode, SampLokaci, Lokacin Riƙe, Ƙidaya Raka'a da Raka'a Zazzabi. Har yanzu mai aiki na iya saita Serial Out don mayar da naúrar zuwa Ikon gida. Hakanan za'a iya saita wurin don canza adireshin cibiyar sadarwa idan ya cancanta.
Hoto 33 yana nuna wurin haɗin RS485 da ayyukan fil. Hoto na 34 yana nuna zane na hanyar sadarwa na RS-485.
7.6. MODBUS Sadarwa
BT-620 tana goyan bayan ka'idar sadarwa ta MODBUS. Serial watsa yanayin RTU ne. Ana amfani da gajerun nau'in bayanai masu zuwa a cikin bayanan rajistar 3x.
| Nau'in Bayanai | Gajarta |
| 16-bit Integer mara sa hannu | Kalma |
| 32-bit Integer mara sa hannu | DWord |
| 32 bit Poating Point | Yawo |
Ana amfani da rajistar Modbus 3x masu zuwa don samun damar karatu daban-daban.
Ana samun damar yin rajistar nau'in nau'in 3x ta amfani da lambar aiki Karanta Masu Rajista (04).
7.6.1. Ragowar Sampda Lokaci
| Bayani | Nau'in Bayanai | Yi rijista (s) |
| Wannan rijistar tana mayar da sauran samplokaci a cikin ticks 25 mSec. (kashi 40 / na biyu) | DWord | 2064-2065 |
7.6.2. Ma'auni na Gaskiya (6) Karatu
| Bayani | Nau'in Bayanai | Yi rijista (s) |
| Ƙimar madaidaicin lokacin Channel 1.
Waɗannan rijistar suna ba da rahoton ƙididdigar ainihin lokacin lokacin sampda zagayowar. |
DWord | 2066-2067 |
| Ƙimar madaidaicin lokacin Channel 2. | DWord | 2068-2069 |
| Ƙimar madaidaicin lokacin Channel 3. | DWord | 2070-2071 |
| Ƙimar madaidaicin lokacin Channel 4. | DWord | 2072-2073 |
| Ƙimar madaidaicin lokacin Channel 5. | DWord | 2074-2075 |
| Ƙimar madaidaicin lokacin Channel 6. | DWord | 2076-2077 |
7.6.3. Jihar Aiki
| Bayani | Nau'in Bayanai | Yi rijista (s) |
| Wannan rijistar tana mayar da matsayin Aiki na aikin counter — Babu (0), Fara (1), Farawa (2), ƙidaya (3), Tsayawa (4). | Kalma | 2082 |
7.6.4. Laser Aiki Yanzu
| Bayani | Nau'in Bayanai | Yi rijista (s) |
| Wannan rijistar tana dawo da ainihin lokacin Laser Aiki na yanzu a mA. | Yawo | 2084-2085 |
7.6.5. Laser Runtime
| Bayani | Nau'in Bayanai | Yi rijista (s) |
| Wannan rijistar tana mayar da ainihin lokacin jimlar lokacin aikin laser a cikin daƙiƙa. Ana adana wannan ƙimar zuwa EE kowane daƙiƙa 60. | DWord | 2088-2089 |
7.6.6. Pump Runtime
| Bayani | Nau'in Bayanai | Yi rijista (s) |
| Wannan rijistar tana mayar da ainihin lokacin jimlar lokacin aikin famfo a cikin daƙiƙa. Ana adana wannan ƙimar zuwa EE kowane daƙiƙa 60. | DWord | 2090-2091 |
7.6.7. Zazzabi na Gaskiya
| Bayani | Nau'in Bayanai | Yi rijista (s) |
| Wannan rijistar tana mayar da ainihin lokacin karatun zafin jiki a C. Idan an shigar da firikwensin Temp/RH na waje | Yawo | 2094-2095 |
7.6.8. Matsi na Gaskiya
| Bayani | Nau'in Bayanai | Yi rijista (s) |
| Wannan rijistar tana mayar da ainihin lokacin karatun matsa lamba a cikin Pa. | Yawo | 2096-2097 |
7.6.9. A baya Sampda Time Stamp
| Bayani | Nau'in Bayanai | Yi rijista (s) |
| Na baya sampda lokaci stamp cikin dakiku.
Ana sabunta wannan ƙimar a ƙarshen kowane sampda zagayowar. |
DWord | 2100-2101 |
7.6.10. Karatun Maganganu na baya
| Bayani | Nau'in Bayanai | Yi rijista (s) |
| Na baya sample Channel 1 counter darajar.
Ana sabunta waɗannan ƙimar a ƙarshen kowace sampda zagayowar. |
DWord | 2102-2103 |
| Na baya sample Channel 2 counter darajar. | DWord | 2104-2105 |
| Na baya sample Channel 3 counter darajar. | DWord | 2106-2107 |
| Na baya sample Channel 4 counter darajar. | DWord | 2108-2109 |
| Na baya sample Channel 5 counter darajar. | DWord | 2110-2111 |
| Na baya sample Channel 6 counter darajar. | DWord | 2112-2113 |
7.6.11. Sharuddan Kuskure
| Bayani | Nau'in Bayanai | Yi rijista (s) |
| Kuskuren yanayin rajistar Duk ragowa a bayyane = Matsayi Yayi Bit 0 saitin = Ƙwaƙwalwar Ƙwaƙwalwar Ƙwaƙwalwar Ƙwaƙwalwar Ƙwaƙwalwar Ƙwaƙwalwar Ƙwaƙwalwar Ƙwaƙwalwar Ƙwaƙwalwar Ƙwaƙwalwar Ƙwaƙwalwar Ƙwaƙwalwar Ƙwaƙwalwar Ƙwaƙwalwar Ƙwaƙwalwar Ƙwaƙwalwar Ƙwaƙwalwar Ƙwaƙwalwar Ƙwaƙwalwar Ƙwaƙwalwar Ƙwaƙwalwar Ƙwaƙwalwar Ƙwaƙwalwar Ƙwaƙwalwar Ƙwaƙwalwar Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Laser ya kasa Bit 2 set = Vacuum Pump kasa Bit 3 saitin = Tacewar iska ta kasa Saitin Bit 4 = Ma'aunin zafin jiki ya gaza Saitin Bit 5 = Matsi na firikwensin ya kasa |
Kalma | 2120 |
7.6.12. Real Time RH
| Bayani | Nau'in Bayanai | Yi rijista (s) |
| Wannan rijistar tana dawo da ainihin lokacin karatun RH a cikin %. Idan an shigar da firikwensin Temp/RH na waje | Yawo | 2122-2123 |
7.7. Ethernet Port Saita da Kanfigareshan
Dole ne a daidaita tashar BT-620 Ethernet tare da wasu direbobi ta mai amfani:
7.7.1. Ƙirƙirar Adireshin IP na BT-620:
- Kuna buƙatar samun adireshin IP a tsaye daga mai gudanar da cibiyar sadarwar ku.
- Kunna BT-620. Saita ƙimar baud zuwa 38400 a cikin menu na SETUP.
- Haɗa kebul na CAT5 Ethernet tsakanin cibiyar sadarwar gida da mai haɗin Ethernet a bayan BT-620.
- Zazzage abubuwan amfani da Ethernet daga https://metone.com/software/ . Dama danna kan Ethernet Drivers da Utilities zip babban fayil kuma zaɓi Cire Duk.
- Danna kan IPSetup Application. Allon mai zuwa zai bayyana:
- Danna layin "Zaɓi Raka'a" wanda ke nuna DHCP'd a cikin take.
- Rubuta adireshin IP ɗin ku a tsaye a cikin taga IP. Tabbatar rubuta wannan lambar kamar yadda za ku buƙaci ta daga baya.
- Buga a cikin abin rufe fuska na cibiyar sadarwa a cikin taga Mask ɗin hanyar sadarwa.
- Saita ƙimar baud zuwa 38400.
- Danna maɓallin Saita don canza adireshin IP na BT-620.
- Danna Launch Webmaɓallin shafi don buɗe mashigar bincike don webdaidaitawar shafi.
- Danna maɓallin rufe X.
7.7.2. Web Kanfigareshan Shafi
- Bude a web browser kuma shigar da Adireshin IP na lamba a cikin filin adireshi idan Launch WebBa a zaɓi shafi a cikin IPSetup ba. Ana amfani da sashin farko na shafin Kanfigareshan hanyar sadarwa don zaɓar DHCP ko adiresoshin IP a tsaye.
a. Idan ka zaɓi DHCP, kuma kana da uwar garken DHCP akan hanyar sadarwarka, za a nuna ƙimar da aka sanya DHCP. Don zaɓar adreshin IP na tsaye damar Yanayin Adireshin zuwa Static, kuma shigar da ƙimar ku a cikin filayen Saitunan Tsaye.
b. Sashen haɗin da ke shigowa yana saita yanayin uwar garken na'ura don sauraron haɗin TCP mai shigowa don kowane tashar tashar jiragen ruwa.
c. Hanyoyin haɗi masu fita (yanayin abokin ciniki)
d. Fakiti na al'ada na iya amfani da sadarwar TCP da UDP.
- Danna kan Serial mahada a saman shafin don saita saitunan serial na na'urar. Canja Baud Rate da Saitunan Gudanar da Yawo don dacewa da BT-620 na ku. Duk sauran saitunan yakamata su kasance kamar yadda aka nuna. Danna maɓallin Submitaddamar da Sabbin Saituna don samun tasirin waɗannan saitunan. A wasu hanyoyin sadarwa masu hankali, ana iya jefar da haruffa. Idan wannan ya faru, saita Gudanar da Gudanarwa zuwa "RTS/CTS" duka a nan kuma akan Serial Screen BT-620 (Sashe na 4.4). Lokacin da ake shakka, saita Gudanar da Yawo zuwa RTS/CTS lokacin amfani da sadarwar Ethernet.
- Cikakken bayani ga web Ana iya samun daidaitawar shafi a cikin SBL2eUsersManual wanda aka zazzage tare da Direbobi da Abubuwan amfani na Ethernet.
7.7.3. Shigar da Direbobin Serial Port na Virtual:
Port COM mai kama-da-wane yana bawa masu amfani damar zayyana tashar tashar COM don saitin Ethernet da suke da su don na'urar Met One Instruments, Inc.. Wannan ba lallai ba ne don samun damar yin magana da na'urar, wannan kawai yana haifar da wata hanya ta dabam don haɗawa da na'urarku idan TCP/IP ba zaɓi ba ne don wasu aikace-aikacen software.
- Daga babban fayil ɗin da aka ciro, gudanar da aikace-aikacen VirtualCommPort-2.1. Allon Zabi Makomar zai bayyana kamar yadda aka nuna a ƙasa. Danna maɓallin Gaba. Zaɓi tsarin aikin ku kuma danna Next. Fara shigarwa allon zai bayyana. Danna Gaba. Allon shigarwa zai nuna cewa software tana shigar da direbobi.
- Lokacin da aka nuna Cikakken Shigarwa, danna maɓallin Gama. Kuna buƙatar sake kunna kwamfutarka kafin direbobi su shirya don amfani.
7.7.4. Yana saita Virtual Com Port don BT-620:
- Bude babban fayil ɗin Kwamfuta na kuma kewaya zuwa babban fayil ɗin C:\nburnVirtualCommPort. Danna sau biyu aikace-aikacen NBVirtualCommPort file:
- Tagan daidaitawa zai bayyana kamar yadda aka nuna a ƙasa. Danna maɓallin Ƙara.
- Zaɓi haɗin abokin ciniki don nau'in haɗin.
- A ƙarƙashin Zaɓi tashar tashar jiragen ruwa, zaɓi tashar tashar COM da kake son sanya wa na'urarka.
- Ƙarƙashin sunan Haɗin, shigar da suna mai siffata don wannan tashar tashar sadarwa ta kama-da-wane.
- Tabbatar cewa "Ƙirƙiri azaman tashar jiragen ruwa mai kama-da-wane" an duba.
- Shigar da adreshin IP na tsaye da lambar tashar jiragen ruwa a cikin sunan mai masaukin nesa/tashar tashar jiragen ruwa. Danna maɓallin Ƙara don ƙara wannan adireshin TCP/IP, sannan maɓallin Aiwatar don ƙara wannan tashar tashar COM ta kama-da-wane.
- Yanzu ya kamata a nuna saitin a babban shafin shirin. Yi amfani da maɓallin wartsakewa a gefen dama don sabunta matsayin tashar jiragen ruwa. Kamar yadda aka gani a hoton da ke ƙasa, ya sami saitunan zama 38400 baud, babu daidaituwa, 8 databits, da 1 tsayawa bit. Bayan magana da na'urar, ta sami damar sabuntawa kuma ta ga adadin bayanan da aka aiko/karɓa.
Kulawa
Saboda yanayin kayan aiki, babu kayan aikin abokin ciniki a cikin BT-620. Ba za a taɓa cire batun BT-620 ko buɗe shi ba saboda kowane dalili. Budewa ko cire lamarin BT-620 ya ɓata garanti kuma yana iya haifar da fallasa hasken laser, wanda zai iya haifar da rauni a ido.
8.1. Jadawalin Sabis
Kodayake babu kayan aikin abokin ciniki a cikin BT-620, akwai abubuwan sabis waɗanda ke tabbatar da ingantaccen aiki na kayan aiki. Table 1 yana nuna jadawalin sabis na BT-620.
| Lokaci Lokaci | Abu | Sashen Manual |
| mako-mako | Gwajin Kidaya Zero | 8.1.1 |
| kowane wata | Gwajin Yawan Yawo | 8.1.2 |
| Shekara-shekara | Daidaitawar Shekara-shekara | 8.1.3 |
Tebur 1 Jadawalin Sabis
8.1.1. Gwajin Kidaya Zero
Yayyowar iska ko tarkace a cikin firikwensin barbashi na iya haifar da ƙidayar ƙarya wanda zai iya haifar da manyan kurakuran ƙidayar lokacin s.ampling tsabtace muhalli. Yi gwajin ƙidayar sifili mai zuwa mako-mako don tabbatar da aiki mai kyau:
- Haɗa matatun sifili zuwa bututun shiga (P/N 81754).
- Saita naúrar kamar haka: Sample Mode = Single, Sample Time = 60 seconds, Volume = Jimlar ƙidaya (TC)
- Fara da kammala kamarample.
- Matsakaicin girman barbashi yakamata ya sami ƙidaya ≤ 1.
8.1.2. Gwajin Yawan Yawo
Gwajin ƙimar kwarara yana tabbatar da sample kwarara kudi ne a cikin haƙuri. Mitar kwararar bayanai dole ne ta zama mara kaya saboda ana iya lodawa injin famfo ta ƙuntatawa na waje. Met One Instruments yana sayar da mitar kwarara mai dacewa (P/N 81755). Gwajin saurin yawo ya biyo baya:
- Haɗa mitar kwararar ± 3% zuwa sampda bututun shiga.
- Fara minti 5ample.
- Matsakaicin karatun mita bayan ~ 3 mintuna yakamata ya zama 1 CFM (28.3 LPM) ± 5%.
- Za'a iya daidaita ƙimar kwarara ta amfani da ɓangaren gaba (duba Sashe na 4.7)
8.1.3. Daidaitawar Shekara-shekara
BT-620 ya kamata a mayar da shi zuwa ga Met One Instruments kowace shekara don daidaitawa da dubawa. Ba za a iya yin gyare-gyaren shekara-shekara ta abokin ciniki ba saboda wannan gyare-gyaren yana buƙatar kayan aiki na musamman da ƙwararren masani. Met One Instruments yana kula da kayan aikin daidaitawa don ƙididdige ƙididdigar barbashi bisa ga hanyoyin yarda da masana'antu kamar ISO, JIS da NIST. Daidaitawar shekara-shekara kuma ya haɗa da dubawa da kiyaye kariya don inganta amincin samfur.
8.2. Haɓaka Flash
BT-620 shine firmware wanda za'a iya haɓakawa ta hanyar haɗin yanar gizo ta hanyar amfani da shirin ƙona walƙiya na Met One Instruments. Binary files kuma dole ne a samar da shirin walƙiya ta Instrument One Instruments.
Shirya matsala
Sashe na gaba yana ɗaukar wasu alamun gazawar gama gari, sanadi da mafita. Yana da mahimmanci a lura cewa babu abubuwan haɗin gwiwar sabis na abokin ciniki a cikin wannan samfur.
Ba za a taɓa cire ko buɗe shari'ar BT-620 ba saboda kowane dalili. Budewa ko cire karar zai ɓata garanti kuma yana iya haifar da fallasa hasken laser, wanda zai iya haifar da rauni a ido.
| Alama | Dalili mai yiwuwa | Magani |
| Nuni baya kunna | Ƙananan Baturi · Baturi mara lahani |
· Cajin baturi · Aika zuwa cibiyar sabis |
| Pump baya kunna lokacin da sample an fara | Ƙananan ko babu baturi · Lalacewar famfo |
· Shigar ko cajin baturi · Aika zuwa cibiyar sabis |
| faifan maɓalli baya aiki | · Sake-sake mai haɗawa · gazawar kayan aikin ciki |
· Aika zuwa cibiyar sabis |
|
Printer baya bugawa |
Ba a kunna firinta ba Ba a shigar da takarda ba · Ba a ciyar da takarda yadda ya kamata |
· Kunna firinta · Shigar da takarda · Buɗe kofa na firinta, sake sanya takarda |
| SampSakamakon ya yi ƙasa da na al'ada | · Yawan kwarara ya yi ƙasa kaɗan · Na'urar gani za ta iya gurɓata |
· Yi gwajin ƙimar kwarara · Aika zuwa cibiyar sabis |
| Sampsakamakon ya fi na al'ada | · Yawan kwarara yana da yawa · Tushen iska a cikin naúrar · Na'urar gani za ta iya gurɓata |
· Yi gwajin ƙimar kwarara · Aika zuwa cibiyar sabis · Aika zuwa cibiyar sabis |
| Baturi baya ɗaukar caji | · Baturi mai lahani ko tsufa Caja mara lahani |
· Aika zuwa cibiyar sabis |
Ƙayyadaddun bayanai
| Ayyuka Rage Girman Barbashi Matsaloli masu ƙima Saitunan Girman Mai amfani Rage Tattaunawa Daidaito Hankali Yawan kwarara Sampda Lokaci Rike Lokaci |
0.3µm - 10µm, tashoshi 6 0.3µm, 0.5µm, 1.0µm, 2.0µm 5.0µm da 10µm Matakan 0.1µm daga 0.3µm - 2.0µm Matakan 0.5µm daga 2.0µm - 10µm 0 - 600,000 barbashi a kowace ƙafar mai siffar sukari (sama da barbashi 20M/m3) ± 10% zuwa calibration aerosol 0.3 µm 1 cfm (28.3 lpm) Daidaitacce: 1 zuwa 9999 seconds Daidaitacce: 0 zuwa 9999 seconds |
|
| Lantarki Hasken Haske Ƙarfi Ayyukan Baturi Adaftar AC / Caja Sadarwa Matsayi |
Laser Diode, 90mW, 780 nm 14.8V Li-Ion baturi mai ɗaukar kansa Har zuwa sa'o'i 8 na yau da kullun amfani ko 4 hours ci gaba da amfani Cikakken caji kusan awa 3. Caja Li-Ion, 100 - 240 VAC zuwa 16.8 VDC @ 3.5 A USB, RS-232 ko RS-485 Haɗu da ISO 21501-4 da CE |
|
| Interface Nunawa Allon madannai |
20 hali x 4 LCD layi 8 nau'in membrane mai mahimmanci |
|
| Na zahiri Tsayi Nisa Zurfin Nauyi |
10.1" (25.7 cm) Tare da hannu 11.6" (29.5 cm) 8" (20.3 cm) 9.5" (24.1 cm) 13.9 lbs (6.3 kg) |
|
| Muhalli Yanayin Zazzabi Mai Aiki Aiki |
0ºC zuwa +40ºC -20ºC zuwa +60ºC |
|
| Na'urorin haɗi An kawo |
Manual aiki Kebul na USB Comet Software Barbashi View Software Cajin baturi Iso-kinetic Sampda Probe Sifili Particulate Tace Takarda Fitar (Rolls 2) |
(PN BT-620-9800) (PN 500784) (PN 80248) (PN View) (PN 81751) (PN 81752) (PN 81754) (PN 750514) |
| Na zaɓi | RH & Binciken Zazzabi Mitar Ruwa Na'urar USB ISO 21501-4 Calibration |
(PN G3120) (PN 81755) (PN 550065) (PN 80849) |
Garanti / Sabis
Garanti
BT-620 yana da garanti akan lahani da aiki na tsawon shekaru biyu (2) daga ranar jirgin.
Duk wani samfurin da aka samu yana da lahani a lokacin garanti, a zaɓi na Met One Instruments, Inc., za a musanya ko gyara. Babu shakka alhakin Met One Instruments, Inc. zai wuce farashin siyan samfurin.
Wannan garantin maiyuwa ba zai shafi samfuran da aka yi amfani da su ba, sakaci, haɗari, ayyukan yanayi, ko waɗanda aka canza ko gyaggyarawa ban da Met One Instruments, Inc. Abubuwan da ake amfani da su kamar masu tacewa, famfo masu ɗaukar nauyi da batura ba su kasance ba. an rufe ƙarƙashin wannan garanti.
Ban da garanti da aka bayyana a nan, ba za a sami wasu garanti ba, na bayyana, bayyananne ko na doka, gami da garantin dacewar ciniki.
Sabis
Duk wani samfurin da aka mayar zuwa Met One Instruments, Inc. don sabis, gyara ko daidaitawa, gami da abubuwan da aka aika don gyara garanti, dole ne a sanya lambar izinin dawowa (RA). Da fatan za a kira 541-471-7111 ko aika imel zuwa service@metone.com neman lambar RA da umarnin jigilar kaya.
Dole ne a aika duk dawo da kaya zuwa masana'anta, an riga an biya kaya. Met One Instruments, Inc. zai biya kuɗin jigilar kaya don mayar da samfurin ga mai amfani na ƙarshe bayan gyara ko maye gurbin abin da garanti ya rufe.
Duk kayan aikin da aka aika zuwa masana'anta don gyara ko daidaitawa dole ne su kasance marasa gurɓata sakamakon sampsinadaran ling, kwayoyin halitta, ko kayan aikin rediyo. Duk wani abu da aka samu tare da irin wannan gurɓataccen abu za a zubar da shi kuma za a yi wa abokin ciniki cajin kuɗin zubarwa.
Sassa daban-daban ko sabis / aikin gyare-gyare da Met One Instruments, Inc. ke yi suna da garanti daga lahani a cikin kayan aiki da aiki na tsawon kwanaki casa'in (90) daga ranar jigilar kaya, ƙarƙashin sharuɗɗa ɗaya kamar yadda aka bayyana a sama.
SAUKA 2011
Saukewa: BT-620-9800
Takardu / Albarkatu
 |
Saduwa da KAYAN DAYA BT-620 Barbashi Counter [pdf] Jagoran Jagora BT-620 Barbashi Counter, BT-620, Barbashi Counter, Counter |