ProLoop NX3
Mokhanni oa loop oa Class D
Bukana ea mosebelisi

Selelekela

Kea leboha ha u rekile "PRO LOOP NX3« Mokhanni oa loop oa Sehlopha sa D!
Ka kopo, nka metsotsoana e seng mekae ho bala bukana ena. E tla u tiisetsa tšebeliso e ntle ea sehlahisoa le lilemo tse ngata tsa ts'ebeletso.

PRO LOOP NX3

2.1 Tlhaloso
Letoto la PRO LOOP NX le na le li-drivers tsa Class D loop tse etselitsoeng ho hlomella likamore ka tšehetso ea molumo bakeng sa batho ba sa utloeng litsebeng.
2.2 Lethathamo la tšebetso
The »PRO LOOP NX3« ke ea moloko oa bakhanni ba induction loop ba nang le ts'ebetso e phahameng le katleho. Ka sesebelisoa sena hoa khoneha ho theha lits'ebetso ho latela maemo a machaba a IEC 60118-4.
2.3 Likahare tsa sephutheloana
Ka kopo sheba hore na likotoana tse latelang li kenyelelitsoe ka har'a sephutheloana:

• PRO LOOP NX3 induction loop driver
• Cable ea matla 1.5 m, li-connectors CEE 7/7 - C13
• Likotoana tse 2 3-point Euroblock-connectors bakeng sa Line 1 le Line 2
• Karolo e le 'ngoe ea 1-point Euroblock-connectors, loop output
• Lipontšo tsa sekhomaretsi tsa loop

Haeba e 'ngoe ea lintho tsena e sieo, ka kopo ikopanye le morekisi oa hau.

2.4 Keletso le polokeho

• Le ka mohla u se ke ua hula thapo ea motlakase ho ntša polaka leboteng; kamehla hula polaka.
• Se ke oa sebelisa sesebelisoa haufi le mehloli ea mocheso kapa likamoreng tse nang le mongobo o phahameng.
• U se ke ua koahela likhahla tsa moea e le hore mocheso leha e le ofe o hlahisoang ke sesebelisoa o ka qhaloa ke ho potoloha ha moea.
• Ho kenngoa ho tlameha ho etsoa ke basebetsi ba tšoanelehang.
• Sesebelisoa se tlameha ho ba moo batho ba sa lumelloeng ba ka se fihlelang.
• Sesebelisoa se tla sebelisoa feela bakeng sa ts'ebetso ea inductive loop system.
• kenya sesebelisoa le likhoele tsa sona ka tsela eo ho seng kotsi, mohlala, ka ho oa kapa ho khoptjoa.
• Hokela mokhanni oa loop feela ho wiring e lumellanang le IEC 60364.

Mosebetsi

Sistimi ea ho mamela ea inductive ha e le hantle e na le terata ea koporo e hoketsoeng loop ampmoqhobi. E hoketsoe mohloling oa molumo, loop ampLifier e hlahisa matla a khoheli ka har'a mochini oa koporo. Lisebelisoa tsa ho utloa tsa momameli li fumana mats'oao ana a matsoai a inductive ntle le waelese ka nako ea 'nete le tsebeng ka kotloloho - ntle le lerata le senyang tikoloho.

Lipontšo, lihokelo le li-control

4.1 Lipontšo
Boemo ba tšebetso ea lupu ampLifier e lula e beiloe leihlo.
Boemo ba hona joale bo bontšoa ke li-LED tse lumellanang le phanele e ka pele.

4.3 Phanele e ka pele le li-control

1. HO 1: Bakeng sa ho lokisa boemo ba Mic/Mola oa ho kenya 1
2. HO 2: Bakeng sa ho lokisa boemo ba Line ea input 2
3. HO 3: Bakeng sa ho lokisa boemo ba Line ea input 3
4. Compression: Pontšo ea phokotso ea boemo ba dB, mabapi le lets'oao la ho kenya
5. MLC (Metal Loss Correction) Matšeliso a karabelo ea khafetsa ka lebaka la tšusumetso ea tšepe mohahong
6. MLC (Metal Loss Correction) Matšeliso a karabelo ea khafetsa ka lebaka la tšusumetso ea tšepe mohahong
7. Loop output pontsho ya jwale
8. Loop LED (e khubelu) - E khantša ka letšoao le kenang ha lesela le hokahane
9. Power-LED - E bontša ts'ebetso
   4.4 Phanele e ka morao le likhokahanyo
10. Socket soketeng
11. Loop: 2-point Euroblock sehokelo se hlahisoang bakeng sa thapo ea loop
12. LINE3: Ho kenya molumo ka jack ea stereo ea 3,5 mm
13. LINE2: Ho kenya molumo ka sehokelo sa lintlha tse 3
14. MIC2: 3,5 mm jack ea stereo bakeng sa li-microphone tsa Electret
15. MIC1/LINE1: Kenyeletso ya Mic- kapa Line- ka sehokelo sa 3-point Euroblock
16. Fetoha ho kenya MIC1/LINE1 lipakeng tsa LIINE-level le MIC-level ka matla a phantom a 48V

Tlhokomeliso, Tlhokomeliso, Kotsi:
Mokhanni oa loop o na le potoloho ea tšireletso e fokotsang tlhahiso ea matla ho boloka mocheso o bolokehileng oa ts'ebetso.
Ho fokotsa kotsi ea ho fokotsa mocheso le ho lumella mocheso o nepahetseng oa mocheso, ho kgothaletswa ho boloka sebaka ka ho toba ka holimo le ka morao ho sesebelisoa se hlakile.
Ho kenya loop driver
Haeba ho hlokahala, yuniti e ka phunyeletsoa motheong kapa leboteng ho sebelisa li-brackets tse ntseng li eketseha. Ela hloko litaelo tsa polokeho bakeng sa lisebelisoa tse ka sebelisetsoang morero ona.

4.4 Liphetoho le lihokelo
4.4.1 Loop connector (11)
Loop ea induction e hokahane ka sehokelo sa 2-point Euroblock

4.4.2 Lisebelisoa tsa molumo
Mehloli ea molumo e hokahana ka lisebelisoa tse 4 tsa mokhanni tse fanoeng molemong ona.
Mokhanni o na le mefuta e 3 ea ho kenya:
MIC1/LINE1: Boemo ba mohala kapa maekrofono
MIC2: Boemo ba maekerofounu
LINE2: Boemo ba mola
LINE3: Boemo ba mola

4.4.3 Phepelo ea motlakase
Bakhanni ba PRO LOOP NX ba sebelisa matla a tobileng a 100 - 265 V AC - 50/60 Hz.
4.4.4 Mosebetsi oa ho qetela:
Sehokelo MIC1/LINE1 (15) se leka-lekana ka mokhoa oa elektroniki.LINE2 ha e leka-lekane ebile e na le maikutlo a mabeli a fapaneng (L = Low / H = Phahameng).

4.4.5 Ho tima / tima
Yuniti ha e na sesebelisoa sa motlakase. Ha thapo e kholo e hoketsoe ho ampLifier le sokete e phelang, the ampli-lifier switches. LED ea matla (sheba setšoantšo sa 4.2: 9) e khantša 'me e bontša boemo bo khantšitsoeng.
Ho tima yuniti, phepelo ea motlakase e tlameha ho hangoa. Haeba ho hlokahala, khaola plug e kholo ho tloha soketeng.

4.4.6 Pontšo mola »Compression dB« (Setšoantšo sa 4.2: 4)
Li-LED tsena li bonts'a phokotso ea boemo ba dB, mabapi le lets'oao la ho kenya.

4.4.7 LED »Loop Current« (Setšoantšo sa 4.2: 8)
LED ena e khubelu e khantša ha loop e hokahane 'me lets'oao la molumo le le teng.
Haeba loop e sitisoa, e khutsufalitsoe kapa ho hanyetsa lupu ha ho pakeng tsa 0.2 ho isa ho 3 ohms, "Loop Current« LED ha e bontšoe.

Kenyeletso ea molumo

5.1 Boikutlo (setšoantšo sa 4.2: 1, 2, 3)
Maemo a ho kenya a MIC1/LINE1, MIC2, LINE2 le LINE3 a ka fetoloa ho latela mohloli oa molumo o hokahaneng.

5.2 Analogue AGC (Automatic Get Control)
Boemo ba molumo bo kenang bo beoa leihlo ke yuniti mme bo fokotsoa ka bo eona ka ho sebelisa analogue amptekhenoloji ea lifier ha ho ka ba le lets'oao le kentsoeng le tletseng haholo. Sena se tiisa polokeho khahlano le mathata a maikutlo le litlamorao tse ling tse sa batleheng.

5.3 MIC1/LINE1 switch-over switch
The pushbutton-swichi e ka morao ea mokhanni oa loop (bona setšoantšo sa 4.3: 16) e fetola LINE1 ho tloha LINE-level ho ea ho MIC1 boemo ba microphone boemong bo tepeletseng.
Ka kopo hlokomela hore sena se kenya matla a phantom a 48V.

HLOKOMELA:
Haeba o hokela mohloli oa molumo o sa leka-lekanang, u se ke oa tobetsa MIC1/LINE1 switch-over switch, kaha sena se ka senya mohloli oa molumo!

5.4 MLC-level regulator (Metal Loss Control)
Taolo ena e sebelisetsoa ho lefella karabo ea makhetlo a mangata ka lebaka la tšusumetso ea tšepe. Haeba ho na le lintho tsa tšepe haufi le ring loop line, sena se ka lebisa ho fokotseha ha ampmatla a lifier ka ho senya matla a khoheli a hlahisitsoeng.

Tlhokomelo le tlhokomelo
The »PRO LOOP NX3« ha e hloke tlhokomelo leha e le efe tlas'a maemo a tloaelehileng.
Haeba yuniti e silafala, e hlakole ka bonolo, damp lesela. Le ka mohla u se ke ua sebelisa li-spirit, li-thinner kapa li-solvents tse ling tsa organic. Se ke oa beha "PRO LOOP NX3« moo e tla pepesetsoa khanya ea letsatsi ka nako e telele. Ho phaella moo, e tlameha ho sireletsoa khahlanong le mocheso o feteletseng, mongobo le ts'oaetso e matla ea mechine.
Hlokomela: Sehlahisoa sena ha sea sireletsoa khahlanong le metsi a splash. Se ke oa beha lijana tse tlatsitsoeng ka metsi, joalo ka linkho tsa lipalesa, kapa eng kapa eng e nang le lelakabe le bulehileng, joalo ka kerese e bonesitsoeng, holim'a sehlahisoa kapa haufi le sehlahisoa.
Ha e sa sebelisoe, boloka sesebelisoa sebakeng se omileng, se sirelelitsoeng lerōleng.

Tiisetso

The »PRO LOOP NX3«ke sehlahisoa se ka tšeptjoang haholo. Haeba ho ka ba le bothata bo itseng ho sa tsotellehe hore na yuniti e setiloe le ho sebetsa ka nepo, ka kopo ikopanye le morekisi oa hau kapa moetsi ka kotloloho.
Tiisetso ena e akaretsa tokiso ea sehlahisoa le ho se khutlisetsa ho uena mahala.
Ho kgothaletswa hore o romele sehlahisoa ka har'a sephutheloana sa sona sa pele, kahoo boloka sephutheloana nako eohle ea nako ea tiisetso.
Tiisetso ha e sebetse tšenyo e bakiloeng ke ho tšoaroa ka phoso kapa boiteko ba ho lokisa yuniti ke batho ba sa lumelloang ho etsa joalo (timetso ea tiiso ea sehlahisoa). Litokiso li tla etsoa feela ka tiisetso haeba karete ea tiisetso e tlatsitsoeng e khutlisoa e tsamaea le kopi ea invoice ea morekisi/receipt ea ho fihlela.
Kamehla hlalosa nomoro ea sehlahisoa ketsahalong efe kapa efe.
Ho lahla ea lisebelisoa tsa motlakase le tsa elektroniki tse sebelisitsoeng (tse sebetsang linaheng tsa European Union le linaheng tse ling tsa Europe tse nang le sistimi e arohaneng ea pokello).
Letšoao la sehlahisoa kapa sephutheloana le bontša hore sehlahisoa sena ha sea lokela ho sebetsoa joalo ka litšila tse tloaelehileng tsa lelapa empa se tlameha ho khutlisetsoa moo ho bokelloang teng bakeng sa ho sebelisoa bocha ha lisebelisoa tsa motlakase le tsa elektroniki.
U sireletsa tikoloho le bophelo bo botle ba banna ba hau ka ho lahla lihlahisoa tsena ka nepo. Tikoloho le bophelo bo botle li behiloe kotsing ke ho lahloa ho fosahetseng.
Tšebeliso ea lintho tse bonahalang e thusa ho fokotsa tšebeliso ea thepa e tala. U tla fumana lintlha tse ling mabapi le ho sebelisoa hape ha sehlahisoa sena ho tsoa ho sechaba sa heno, k'hamphani ea hau ea thekiso ea thepa kapa morekisi oa lehae.

Litlhaloso

Bophahamo / Bophara / botebo:	33 mm x 167 mm x 97 mm
Boima ba 'mele:	442 g
Phepelo ea motlakase:	100 - 265 V AC 50 / 60 Hz
Sistimi ea ho pholisa:	E senang balateli
Ka ho iketsa Taolo ea taolo:	Puo e ntlafalitsoeng, mefuta e matla: > 40 dB
Tokiso ea ho Lahleheloa ha Metal (MLC):	0 - 4 dB / octave
Tshebetso mefuta e fapaneng:	0°C - 45°C, <2000 m ka holim'a bophahamo ba leoatle

Loop output:

Loop current:	2,5 A RMS
Khatello ea mali:	12 V RMS
Loop resistance DC:	0,2 - 3,0 Ω
Sebaka sa maqhubu:	80-6000 Hz (+/- 1,5 dB)

Kenyelletso:

MIC1/LINE1	Mic le Line Level, 3-point Euroblock plug 5-20 mV / 2 kΩ / 48 V (MIC) 25 mV – 0.7 V / 10 kΩ (LINE)
MIC2	5-20 mV / 2 kΩ / 5 V
MOLAO 2	Line Level, 3-point Euroblock plug H: 25 mV - 100 mV / 10 kΩ (LINE) L: 100 mV - 0.7 V / 10 kΩ (LINE)
MOLAO 3	Boemo ba Mola, 3,5 mm sokete ea jack stereo 25 mV – 0.7 V / 10 kΩ (LINE)

Liphetho:

Sehokelo sa loop

2-point Euroblock plug

Sesebelisoa sena se latela litaelo tse latelang tsa EC:

– 2017/2102 / EC RoHS-taelo – 2012/19 / EC WEEE-taelo - 2014 / 35 / EC Phallo e tlasetagtaelo - 2014/30 / EC Tšebelisano ea Motlakase

Ho lumellana le litaelo tse thathamisitsoeng ka holimo ho netefatsoa ke tiiso ea CE sesebelisoa.
Liphatlalatso tsa ho latela melao ea CE li fumaneha Inthaneteng ho www.humantechnik.com.
Moemeli ea lumelletsoeng oa Humantechnik UK:
Sarabec Ltd.
15 High Force Road
MIDDLESBROUTH TS2 1RH
united kingdom
Sarabec Ltd., ka hona e phatlalatsa hore sesebelisoa sena se lumellana le lisebelisoa tsohle tsa molao tsa UK.
Phatlalatso ea UK ea ho lumellana e fumaneha ho: Sarabec Ltd.
Lintlha tsa tekheniki li ka fetoha ntle le tsebiso pele.

Humantechnik Tšebeletso-Molekane
Great Britain

Sarabec Ltd 15 High Force Road GB-Middlesbrough TS2 1RH

Mohala: +44 (0) 16 42/ 24 77 89 Fax: +44 (0) 16 42/ 23 08 27 E-mail: enquiries@sarabec.co.uk

Bakeng sa balekane ba bang ba litšebeletso Europe ka kopo ikopanye le:
Humantechnik Jeremane
Mohala: +49 (0) 76 21/ 9 56 89-0
Fax: +49 (0) 76 21/ 9 56 89-70
Marang-rang: www.humantechnik.com
E-mail: info@humantechnik.com

RM428200 · 2023-06-01

Litokomane / Lisebelisoa

AUDIOropa ProLoop NX3 Loop Ampmoqhobi [pdf] Bukana ea Mosebelisi ProLoop NX3, ProLoop NX3 Loop AmpLifier, Loop Ampsefepi, Ampmoqhobi

Litšupiso

• Bukana ea Mosebelisi