ProLoop NX3
Onye ọkwọ ụgbọ ala klaasị D
Akwụkwọ ntuziaka onye ọrụ
Okwu mmalite
Daalụ maka ịzụrụ »PRO LOOP NX3« klaasị D loop ọkwọ ụgbọ ala!
Biko were obere oge gụọ akwụkwọ ntuziaka a. Ọ ga-eme ka ị hụ na ị ga-eji ngwaahịa ahụ na ọtụtụ afọ ọrụ.
PRO LOOP NX3
2.1 Nkọwa
Usoro PRO LOOP NX nwere ndị ọkwọ ụgbọ ala klaasị D emere iji kwado ọnụ ụlọ nwere nkwado ọdịyo maka ndị nwere nkụchi ntị.
2.2 Oke arụmọrụ
The "PRO LOOP NX3" bụ nke ọgbọ nke induction loop ọkwọ ụgbọala nwere nnukwu arụmọrụ na arụmọrụ. Site na ngwaọrụ a, enwere ike ịmepụta nrụnye dịka ọkọlọtọ mba ụwa IEC 60118-4 si dị.
2.3 ọdịnaya nke ngwugwu
Biko lelee ma agụnyere iberibe ndị a na ngwugwu:
- PRO LOOP NX3 induction loop ọkwọ ụgbọ ala
- Igwe ọkụ 1.5 m, njikọ CEE 7/7 - C13
- 2 ibe 3-point Euroblock-njikọ maka ahịrị 1 na ahịrị 2
- 1 ibe 2-isi Euroblock-njikọ, akaghị aka mmepụta
- akara ngosi nrapado anya
Ọ bụrụ na nke ọ bụla n'ime ihe ndị a efu, biko kpọtụrụ onye na-ere ahịa gị.
2.4 Ndụmọdụ na nchekwa
- Adịla mgbe ọ bụla na eriri ike wepụ plọg na mgbidi oghere; na-adọta plọg mgbe niile.
- Ejila ngwaọrụ arụ ọrụ n'akụkụ ebe okpomọkụ ma ọ bụ n'ime ụlọ nwere oke iru mmiri.
- Ekpuchila ikuku ikuku ka okpomọkụ ọ bụla nke ngwaọrụ na-emepụta wee nwee ike ịgbasa site na mgbasa ozi ikuku.
- Ndị ọrụ ruru eru ga-arụrịrị nrụnye.
- Ngwa a ga-abụrịrị ndị na-enwetaghị ikike.
- Ngwa a ga-eji naanị maka sistemu loop inductive.
- Wụnye ngwaọrụ na wiring ya n'ụzọ na enweghị ihe egwu, dịka site na ịda ma ọ bụ daa.
- Jikọọ onye na-anya loop naanị na wiring nke dabara na IEC 60364.
Ọrụ
Sistemụ ege ntị nke na-eme ihe nwere n'ụzọ bụ isi bụ waya ọla kọpa ejikọrọ na loop amponye ndu. Ejikọrọ na isi iyi ọdịyo, loop amplifier na-emepụta oghere ndọta na onye na-eduzi ọla kọpa. Ihe enyemaka ntị nke onye na-ege ntị na-enweta akara ngosi ọdịyo na-akpali akpali na ikuku ozugbo yana na ntị ozugbo - na-enweghị mkpọtụ gburugburu na-adọpụ uche.
Ihe ngosi, njikọ na njikwa
4.1 Ngosipụta
Ọnọdụ ọrụ nke loop ampa na-enyocha ihe ọkụ ọkụ mgbe niile.
E gosipụtara ọkwa dị ugbu a site na LEDs kwekọrọ na panel ihu.
4.3 N'ihu panel na njikwa
- N'ime 1: Maka ịhazigharị ọkwa Mic/Line nke ntinye 1
- N'ime 2: Maka ịhazigharị ọkwa ntinye 2
- N'ime 3: Maka ịhazigharị ọkwa ntinye 3
- Mkpakọ: Ngosipụta mbelata ọkwa dị na dB, n'ihe metụtara mgbama ntinye
- MLC (Metal Loss Correction) Nkwụghachi ụgwọ nzaghachi ugboro ugboro n'ihi mmetụta ígwè dị na ụlọ ahụ
- MLC (Metal Loss Correction) Nkwụghachi ụgwọ nzaghachi ugboro ugboro n'ihi mmetụta ígwè dị na ụlọ ahụ
- Ngosipụta loop dị ugbu a
- Loop LED (red) - Na-enwu ọkụ site na mgbama mbata mgbe ejikọrọ akaghị
- Ike-LED - Na-egosi ọrụ
4.4 N'azụ panel na njikọ
- Ihe ntanetị
- Loop: 2-point Euroblock mmepụta njikọ maka loop cable
- LINE3: Ntinye ọdịyo site na jakị stereo 3,5 mm
- LINE2: Ntinye ọdịyo site na njikọ 3-point
- MIC2: Jack stereo 3,5 mm maka igwe okwu Electret
- MIC1/LINE1: Ntinye igwe-ma ọ bụ Line-site na njikọ Euroblock 3-point
- Gbanwee ntinye MIC1/LINE1 n'etiti ọkwa LIINE na ọkwa MIC nwere ike phantom 48V
Nlebara anya, ịdọ aka ná ntị, ihe egwu:
Ọkwọ ụgbọala loop na-egosipụta sekit nchebe nke na-ebelata mmepụta ike iji nọgide na-enwe okpomọkụ na-arụ ọrụ nke ọma.
Iji belata ihe ize ndụ nke njedebe okpomọkụ na ikwe ka ikpo ọkụ kwesịrị ekwesị, a na-atụ aro ka idobe oghere ahụ kpọmkwem n'elu na n'azụ ngwaọrụ ahụ.
Ịkwanye onye ọkwọ ụgbọ ala loop
Ọ bụrụ na ọ dị mkpa, enwere ike ịsacha unit ahụ na ntọala ma ọ bụ mgbidi site na iji ihe nkwụnye nkwụnye. Debe ntuziaka nchekwa maka ngwaọrụ ndị enwere ike iji maka ebumnuche a.
4.4 mmezi na njikọ
4.4.1 Njikọ aka (11)
Ejikọrọ loop induction site na njikọ 2-point Euroblock
4.4.2 Ntinye ọdịyo
Isi mmalite ọdịyo na-ejikọ site na ntinye 4 nke ọkwọ ụgbọ ala enyere maka ebumnuche a.
Onye ọkwọ ụgbọ ala nwere ụdị ntinye atọ:
MIC1/LINE1: Ahịrị ma ọ bụ ọkwa igwe okwu
MIC2: ọkwa igwe okwu
LINE2: Ọkwa ahịrị
LINE3: Ọkwa ahịrị
4.4.3 Ike ọkọnọ
Ndị ọkwọ ụgbọ ala PRO LOOP NX na-eji ọkụ ọkụ 100 - 265 V AC - 50/60 Hz.
4.4.4 Ọrụ njedebe:
Njikọ MIC1/LINE1 (15) bụ nzizi eletrọnịkị.
LINE2 enweghị nha nha ma nwee mmetụta abụọ dị iche iche (L = Ala / H = Elu).
4.4.5 Gbanyụọ / gbanyụọ
Ngwa ahụ enweghị mgba ọkụ ọkụ. Mgbe ejikọrọ eriri mains na amplifier na oghere dị ndụ, na amplifier na-agbanye. Igwe ọkụ ọkụ (lee foto 4.2: 9) na-enwu ọkụ wee gosi ọnọdụ agbanwuru.
Iji gbanyụọ unit ahụ, a ga-ewepụrịrị ọkụ eletrik. Ọ bụrụ na ọ dị mkpa, kwụpụ plọg isi na oghere.
4.4.6 Ngosipụta ahịrị "Mkpakọ dB" (Fig 4.2: 4)
Igwe ọkụ ndị a na-egosi mbelata ọkwa dị na dB, n'ihe metụtara mgbama ntinye.
4.4.7 LED "Loop dị ugbu a" (Fig 4.2: 8)
Igwe ọkụ na-acha uhie uhie a na-enwu mgbe ejikọrọ akaghị yana mgbama ọdịyo dị.
Ọ bụrụ na akwụsịghị loop ahụ, obere mkpirisi ma ọ bụ nkwụsị aka adịghị n'etiti 0.2 ruo 3 ohms, "Loop Current" LED adịghị egosipụta.
Ntinye ọdịyo
5.1 Mmetụta (ọgụgụ 4.2: 1, 2, 3)
Enwere ike ịhazi ọkwa ntinye nke MIC1/LINE1, MIC2, LINE2 na LINE3 dịka isi iyi ọdịyo ejikọrọ.
5.2 Analogue AGC (njikwa uru akpaaka)
A na-enyocha ọkwa ọdịyo na-abata site na otu ma wedata ya ozugbo site na iji analog ampTeknụzụ lifier n'ihe omume nke mgbama ntinye furu efu. Nke a na-ekwe nkwa nchekwa megide nsogbu nzaghachi na mmetụta ndị ọzọ achọghị.
5.3 MIC1/LINE1 mgbanwe mgbanwe
Ntụgharị bọtịnụ n'azụ onye ọkwọ ụgbọ ala (lee foto 4.3: 16) na-atụgharị ntinye LINE1 site na ọkwa LINE ruo ọkwa igwe okwu MIC1 n'ọnọdụ ịda mbà n'obi.
Biko mara na nke a na-eme ka ike phantom 48V rụọ ọrụ.
IHE:
Ọ bụrụ na ị jikọọ isi iyi ọdịyo na-ezighi ezi, pịala mgbanwe mgbanwe MIC1/LINE1, n'ihi na nke a nwere ike imebi isi iyi ọdịyo!
5.4 MLC-ọkwa nchịkwa (Metal Loss Control Control)
A na-eji njikwa a kwụọ ụgwọ nzaghachi ugboro ugboro n'ihi mmetụta ígwè. Ọ bụrụ na enwere ihe igwe dị nso n'ahịrị loop mgbanaka, nke a nwere ike ibute mbelata ampike lifier site n'iwepụ oghere magnetik emepụtara.
Nlekọta na nlekọta
"PRO LOOP NX3" anaghị achọ mmezi ọ bụla n'okpuru ọnọdụ nkịtị.
Ọ bụrụ na nkeji ahụ aghọọ unyi, jiri nwayọọ hichaa ya dị ọcha, damp akwa . Ejila mmụọ, thinners ma ọ bụ ihe mgbaze organic ndị ọzọ. Edokwala "PRO LOOP NX3" ebe a ga-ekpuchi ya na ìhè anyanwụ zuru oke ruo ogologo oge. Tụkwasị na nke a, a ghaghị ichebe ya pụọ na oke okpomọkụ, mmiri mmiri na nnukwu ihe mgbagwoju anya.
Mara: A naghị echebe ngwaahịa a ka ọ ghara ịfesa mmiri. Etinyekwala akpa ọ bụla juputara na mmiri, dị ka vases ifuru, ma ọ bụ ihe ọ bụla nwere ọkụ mepere emepe, dị ka kandụl ọkụ, na ma ọ bụ nso ngwaahịa ahụ.
Mgbe ejighị ya, chekwaa ngwaọrụ ahụ n'ebe kpọrọ nkụ, na-echebe site na uzuzu.
Akwụkwọ ikike
The "PRO LOOP NX3" bụ ngwaahịa a pụrụ ịdabere na ya nke ukwuu. Ọ bụrụ na adịghị arụ ọrụ emee n'agbanyeghị na edoziri unit ma rụọ ọrụ nke ọma, biko kpọtụrụ onye na-ere ahịa gị ma ọ bụ onye nrụpụta ozugbo.
Akwụkwọ ikike a na-ekpuchi nrụzi ngwaahịa ma weghachi gị ya n'efu.
A na-atụ aro ka izipu ngwaahịa na nkwakọ ngwaahịa mbụ ya, yabụ dowe nkwakọ ngwaahịa ahụ ogologo oge ikike.
Akwụkwọ ikike anaghị emetụta mmebi nke njikwa na-ezighi ezi kpatara ma ọ bụ nwaa imezi otu ahụ site n'aka ndị mmadụ enyeghị ikike ime ya (mbibi nke akara ngwaahịa). A ga-arụzi naanị n'okpuru akwụkwọ ikike ma ọ bụrụ na eweghachitere kaadị akwụkwọ ikike emechara ya na otu akwụkwọ ọnụahịa/ruo nnata nke onye na-ere ahịa.
Dee nọmba ngwaahịa mgbe niile na mmemme ọ bụla.
mkpofu nke igwe eletriki na igwe eletrọnịkị (nke dị na mba nke European Union na mba Europe ndị ọzọ nwere usoro nchịkọta dị iche).
Akara dị na ngwaahịa ma ọ bụ nkwakọ ngwaahịa na-egosi na a gaghị ejikwa ngwaahịa a dị ka ihe mkpofu ụlọ mana a ga-eweghachi ya n'ebe a na-anakọta maka igwe eletriki na eletrọnịkị.
Ị na-echekwa gburugburu na ahụike nke ụmụ nwoke ibe gị site na mkpofu ngwaahịa a nke ọma. A na-etinye gburugburu na ahụike n'ihe egwu site na mkpofu na-ezighi ezi.
Imegharị ihe na-enyere aka belata oriri nke akụrụngwa. Ị ga-enweta ozi ndị ọzọ gbasara ịmegharị ngwaahịa a n'aka obodo gị, ụlọ ọrụ mkpofu gị ma ọ bụ onye na-ere ahịa mpaghara gị.
Nkọwapụta
| Ogologo / Obosara / Omimi: | 33 mm x 167 mm x 97 mm |
| Arọ: | 442 g |
| Ịnye ọkụ: | 100 - 265 V AC 50/60 Hz |
| Sistemụ oyi: | Enweghị ofufe |
| Akpaaka Nweta njikwa: |
Ahaziri okwu, oke ike:> 40dB |
| Ndozi mfu igwe (MLC): | 0-4 dB / octave |
| Oke ọrụ: | 0°C – 45°C, <2000m n'elu oke osimiri |
Nsonaazụ loop:
| Mkpọchi ugbu a: | 2,5 RMS |
| Esemokwu anya: | 12 V RMS |
| DC na-eguzogide loop: | 0,2 - 3,0 Ω |
| Oke ugboro: | 80-6000 Hz (+/- 1,5 dB) |
Ntinye:
| MIC1/LINE1 | Ọkwa igwe okwu na ahịrị, nkwụnye euroblock 3 5-20 mV / 2 kΩ / 48 V (MIC) 25 mV - 0.7 V / 10 kΩ (LINE) |
| MIC2 | 5-20 mV / 2 kΩ / 5 V |
| LINE2 | Ọkwa ahịrị, nkwụnye euroblock 3 H: 25 mV – 100 mV / 10 kΩ (akara) L: 100 mV - 0.7 V / 10 kΩ (akara) |
| LINE3 | Ọkwa ahịrị, oghere stereo 3,5 mm 25 mV - 0.7 V / 10 kΩ (LINE) |
Nsonaazụ:
| Njikọ loop | 2-point Euroblock plọg |
Ngwaọrụ a na-agbaso ntuziaka EC ndị a:
 |
- 2017/2102 / EC RoHS-ntụziaka – 2012/19 / EC WEEE-ntụziaka – 2014/35 / EC Voltage ntuziaka – 2014/30/EC ndakọrịta elektrọnik |
Nrube isi na ntuziaka ndị edepụtara n'elu bụ akara CE na ngwaọrụ ahụ kwadoro.
Nkwupụta nnabata CE dị na ịntanetị na www.humantechnik.com.
Onye nnọchi anya Humantechnik UK nyere ikike:
Ụlọ ọrụ Sarabec Ltd.
15 High Force Road
etiti etiti TS2 1RH
United Kingdom
Sarabec Ltd., ebe a na-ekwupụta na ngwaọrụ a na-akwado usoro iwu UK niile.
Nkwupụta nkwenye nke UK dị site na: Sarabec Ltd.
Nkọwa nka na ụzụ ga-agbanwe na-enweghị ọkwa mbụ.
Humantechnik Ọrụ-Onye Mmekọ
Great Britain
| Ụlọ ọrụ Sarabec Ltd 15 High Force Road GB-Middlesbrough TS2 1RH |
Tel.: +44 (0) 16 42/ 24 77 89 Fax: +44 (0) 16 42/ 23 08 27 Email: ajụjụ@sarabec.co.uk |
Maka ndị mmekọ ọrụ na Europe biko kpọtụrụ:
Humantechnik Germany
Tel.: +49 (0) 76 21/ 9 56 89-0
Fax: +49 (0) 76 21/ 9 56 89-70
Ịntanetị: www.humantechnik.com
Email: info@humantechnik.com
RM428200 · 2023-06-01
Akwụkwọ / akụrụngwa
 |
AUDIOropa ProLoop NX3 Loop Ampna -emegharị ihe [pdf] Akwụkwọ ntuziaka onye ọrụ ProLoop NX3, ProLoop NX3 Loop Amponye, Loop Amponye ndu, Ampna -emegharị ihe |
