Ib qho American Control Electronics Brand
MDVF 03
Qhib Chassis Microprocessor-based
Variable Frequency Drive nrog kev sib cais rau ib leeg thiab peb theem AC Motors

Specifications

Qauv	Kab Voltage (VAC)	Tsav Voltage (VAC)	Nruam lub cev muaj zog tam sim no (Amps)	Lub cev muaj zog Horsepower Range
MDVF03-D230-PCM	115 los yog 230	115	3.0 *	1/16 – 3/8 1/8 – 3/4

* Thaum mounted tso cai rau upwards airflow hla lub phaj.
* De-rate rau 2.5 amps thaum mounted nyob rau hauv lwm yam configuration.

AC Line Voltag115 / 230 VAC ± 10%, 50 / 60 Hz, ib theem
AC Line Tam sim no nrog 115 VAC kab voltage nrog lub cev muaj zog 115V…………………………6.7 amps
AC Line Tam sim no nrog 115 VAC kab voltage nrog 230V lub cev muaj zog…………………………….10.7 amps
AC Line Tam sim no nrog 230 VAC kab voltage nrog lub cev muaj zog 230V…………………………6.7 amps
AC Motor Voltage …………………………………………… 115 lossis 230 VAC, 50/60 Hz, ib zaug lossis peb theem
Kev Muaj Peev Xwm Tshaj Tawm ………………………………………………………………… 200% (2x) rau 1 feeb
Standard Carrier zaus …………………………………………………… 1.6 lossis 16 kHz
Output Zaus Range………………………………………….0 – 120 Hz
DC Txhaj Tshuaj Voltage…………………………………………………………0 – 27 VDC
DC Txhaj Tshuaj Voltage Sijhawm……………………………………………………0 – 5 vib nas this
Acceleration Time Range (0 – 60 Hz) ………………………………………..0.5 – 12 seconds
Lub sij hawm Deceleration (60 – 0 Hz)………………………………………….0.5 – 12 vib nas this
Analog Input Signal Range ………………………………………..0 ± 5 VDC, 0 ± 10 VDC, 4 – 20 mA
Input Impedance (S1 txog S2) ……………………………………………………..> 50K ohms
Kev vibration siab tshaj plaws (0 - 50 Hz, > 50 Hz) ……………………………………… 0.5G, 0.1G siab kawg
Cov Cuab Yeej Cuab Yeej Cuab Yeej Cuab Yeej ……………………………… 32°F – 104°F (0°C – 40°C)
Nyhav……………………………………………………………………………….1.20 lbs (0.54 kg)
Daim ntawv pov thawj kev nyab xeeb ………………………………………..cULus Listed, UL 61800-5-1, File #E132235

Ceeb toom kev nyab xeeb

Nyeem tag nrho cov lus ceeb toom kev nyab xeeb ua ntej teeb tsa cov cuab yeej no

• Tsis txhob nruab, tshem tawm, lossis rov ua dua cov cuab yeej no nrog lub zog siv. Muaj ib tus kws tshaj lij hluav taws xob tsim nyog nruab, kho, thiab pabcuam cov cuab yeej no. Ua raws li National Electrical Code thiab tag nrho lwm cov cai siv hluav taws xob thiab kev nyab xeeb, suav nrog cov kev cai ntawm Txoj Cai Kev Nyab Xeeb thiab Kev Noj Qab Haus Huv (OSHA), thaum txhim kho cov khoom siv.
• Circuit Court muaj peev xwm nyob ntawm 115 lossis 230 VAC saum lub ntiaj teb hauv av. Tsis txhob cuam tshuam ncaj qha nrog lub rooj tsav xwm luam tawm lossis nrog cov khoom siv hluav taws xob tiv thaiv kom tsis txhob raug mob hnyav lossis tuag taus. Siv cov ntsia hlau tsis yog xim hlau los kho cov calibration trim pots. Siv cov cuab yeej tiv thaiv tus kheej pom zoo thiab cov cuab yeej insulated yog tias ua haujlwm ntawm qhov tsav no nrog lub zog siv.
• Txo txoj kev pheej hmoo ntawm hluav taws xob hluav taws xob, kev poob siab, lossis tawg los ntawm kev siv cov txheej txheem hauv av kom zoo, kev tiv thaiv dhau tam sim no, kev tiv thaiv thermal, thiab cov ntaub thaiv npog. Ua raws li cov txheej txheem kho suab.
• Minarik Drives xav kom lub installation ntawm tus tswv fais fab hloov hauv kab voltage tswv yim. Cov kev hloov pauv yuav tsum raug ntsuas rau 250 VAC thiab 200% ntawm lub npe lub npe tam sim no.
• Tshem tawm AC kab hluav taws xob yog tib txoj kev siv tau rau kev nres thaum muaj xwm ceev. Tsis txhob siv DC txhaj tshuaj braking, decelerating kom tsawg kawg nkaus ceev, los yog coasting mus rau ib tug nres rau thaum muaj xwm ceev nres. Tej zaum lawv yuav tsis nres lub tsav uas ua haujlwm tsis zoo.
• Kab pib thiab nres (thov thiab tshem tawm AC kab voltage) raug pom zoo rau qhov tsis tshua muaj pib thiab nres ntawm lub tsav nkaus xwb. Regenerative braking, decelerating kom tsawg kawg nkaus ceev, los yog coasting mus rau ib tug nres yog pom zoo kom nquag pib thiab nres. Nquag pib thiab nres tuaj yeem tsim lub zog siab. Qhov no yuav ua rau muaj kev puas tsuaj rau lub cev muaj zog.
• Tsis txhob disconnect ib yam ntawm lub cev muaj zog coj los ntawm tus tsav tshwj tsis yog tias lub hwj chim raug tshem tawm los yog tsav ua neeg tsis taus. Qhib ib qho txhuas thaum tsav tsheb yuav ua rau tus tsav puas.
• Nyob rau hauv tsis muaj qhov yuav tsum tau lub hwj chim thiab logic theem xov hlau yuav bundled ua ke.
• Nco ntsoov tias potentiometer tabs tsis ua rau kev sib cuag nrog potentiometer lub cev. Grounding lub tswv yim yuav ua rau kev puas tsuaj rau tus tsav.
• Tsuas yog txuas mus rau lub davhlau ya nyob twg L2-DBL yog siv 115 VAC kab nrog lub cev muaj zog ntsuas siab dua 120 VAC.
• Kev ceev faj yuav tsum tau ua thaum ua haujlwm kiv cua-txias motors ntawm qis ceev vim tias lawv cov kiv cua yuav tsis txav cua txaus kom txias lub cev muaj zog. Minarik Drives pom zoo "inverter-lub luag haujlwm" lub cev muaj zog thaum lub nrawm nrawm dhau 10: 1.
• Cov khoom no tsis muaj cov khoom hauv lub xeev lub cev muaj zog tiv thaiv overload. Nws tsis muaj qhov ceev-rhiab heev tiv thaiv, thermal nco, los yog cov kev cai kom tau txais thiab ua raws li cov teeb liab los ntawm tej thaj chaw deb pab kiag li lawm tiv thaiv kub. Yog tias xav tau kev tiv thaiv lub cev muaj zog hauv cov khoom siv kawg, nws yuav tsum tau muab los ntawm cov khoom siv ntxiv raws li NEC cov qauv.

Qhov ntev

Kev teeb tsa

Mounting

• Drive Cheebtsam yog rhiab heev rau electrostatic paug. Tsis txhob cuam tshuam ncaj qha nrog lub rooj tsav xwm Circuit Court. Tuav lub tsav los ntawm lub phaj nkaus xwb.
• Tiv thaiv tus tsav los ntawm av, noo noo, thiab kev sib cuag tsis raug.
• Muab chav txaus rau kev nkag mus rau cov terminals thiab calibration trim pots.
• Mount lub tsav kom deb ntawm qhov chaw sov. Ua haujlwm tsav nyob rau hauv qhov teev nyob ib puag ncig huab cua ua haujlwm kub.
• Tiv thaiv kev sib txuas xoob los ntawm kev zam dhau kev co ntawm tus tsav.
• Mount lub tsav nrog nws lub rooj tsavxwm hauv ib lub dav hlau kab rov tav lossis ntsug. Rau 0.17 "(4 mm) qhov nyob rau hauv lub phaj txais # 8 lauj kaub taub hau screws. Yog hais tias mounted horizontally, tus tsav yuav tsum de-rated rau 2.5 amps.
• Lub phaj yuav tsum yog lub ntiaj teb grounded.

Kev xaim: Siv 16 - 18 AWG 75 ° C xaim rau AC kab (L1, L2, L2-DBL) thiab lub cev muaj zog (U / A2, V / A1, W) thaiv. Siv 18 - 24 AWG hlau rau logic thaiv (COM, DIR, EN, Sl, S2, S3). Ua raws li NEC cov qauv rau kev xaim. Tightening torque rau lub hwj chim davhlau ya nyob twg TB502 nyob rau hauv qab board yog 9 lb-hauv (1.0 Nm). Tightening torque rau logic terminals TB501 thiab TB502 nyob rau sab saum toj board yog 1.77 lb-hauv (0.2 Nm).
Daim Ntawv Qhia Txog Kev Tiv Thaiv: Raws li txoj cai dav dav, nws raug pom zoo kom tiv thaiv txhua tus neeg xyuas pib. Yog tias nws tsis yog qhov ua tau zoo los tiv thaiv lub zog hluav taws xob, nws raug nquahu kom thaiv tag nrho cov logic-theem coj. Yog tias kev thaiv cov logic-theem coj tsis yog qhov ua tau zoo, tus neeg siv yuav tsum twist tag nrho cov logic coj nrog lawv tus kheej kom txo qis suab nrov. Tej zaum nws yuav tsim nyog rau lub ntiaj teb hauv av tiv thaiv cable. Yog hais tias lub suab nrov yog tsim los ntawm cov khoom siv uas tsis yog tus tsav tsheb, ua kom cov ntaub thaiv npog ntawm qhov kawg tsav. Yog hais tias lub suab nrov yog tsim los ntawm tus tsav, av daim ntaub thaiv thaum kawg deb ntawm lub tsav. Tsis txhob khawb ob qhov kawg ntawm daim ntaub thaiv.
Kev ntsuas luv luv tam sim no (SCCR): Qhov tsav no haum rau kev siv ntawm lub voj voog uas muaj peev xwm xa tsis tau ntau tshaj 5,000 rms Symmetrical Amp115/230V max.
Ceg tiv thaiv Circuit Court: Cov khoom no muaj cov khoom tseem ceeb hauv lub xeev tiv thaiv hluav taws xob, uas tsis muaj kev tiv thaiv kab mob. Ceg tiv thaiv Circuit Court yuav tsum tau muab nyob rau hauv raws li National Electrical Code thiab lwm yam kev cai hauv zos ntxiv. Daim Ntawv Teev Npe UL xav kom siv Class J, Class CC, lossis Class T fuses nyob ntawm qhov tsawg kawg nkaus ntawm 230 VAC. Nws raug nquahu kom siv fuses ntsuas rau 200% ntawm qhov siab tshaj plaws lub cev muaj zog tam sim no, tshwj tsis yog siv cov tsav tsheb hauv kev ua haujlwm ob npaug, qhov twg cov fuses yuav tsum tau ntsuas rau 400% ntawm qhov siab tshaj plaws lub cev muaj zog tam sim no. Fuse lub HOT ceg ntawm AC kab thaum siv 115 VAC thiab ob kab thaum siv 230 VAC.

POWER (Kab hauv qab)

AC Line Input
Txuas AC kab voltage rau terminals L1 thiab L2. Yog tias yuav siv ob hom (230 VAC tso zis nrog 115 VAC input), txuas AC kab voltage rau terminals L1 thiab L2-DBL. Tsis txhob ua ib qho kev sib txuas rau L2-DBL yog tias siv 230 VAC kab qhov chaw.

Tsav
Txuas lub cev muaj zog coj mus rau terminals U / A2, V / A1, thiab W. Yog hais tias lub cev muaj zog tsis tig mus rau qhov xav tau, lub hwj chim cia tus tsav thiab thim rov qab ob qho ntawm peb qhov kev sib txuas.

LOGIC (TOP BOARD)

Speed ​​Potentiometer
Siv 10K ohm, 1/4 W potentiometer rau kev tswj ceev. Txuas lub counter-clockwise kawg ntawm lub potentiometer rau S1, wiper rau S2, thiab lub moos xaus rau S3. Yog hais tias lub potentiometer ua haujlwm inversely ntawm qhov xav tau kev ua haujlwm, (piv txwv li kom ceev lub cev muaj zog, koj yuav tsum tig lub potentiometer counterclockwire), fais fab tuag tsav thiab sib pauv S1 thiab S3 kev sib txuas.
Analog Input Signal Range
Es tsis txhob siv lub potentiometer, tus tsav yuav raug xaim los ua raws li lub teeb liab analog input. Qhov teeb liab tawm tswv yim no tuaj yeem ua rau hauv daim ntawv ntawm voltage (0 ± 5, 0 ± 10 VDC) lossis tam sim no (4- 20 mA). Lub built-in cais tso cai rau lub input teeb liab yuav tsum grounded los yog ungrounded (floating). Txuas lub teeb liab / tsis zoo (-) rau S1 thiab cov teeb liab siv / zoo (+) rau S2. Xa mus rau ntu Startup rau kev teeb tsa jumper ntsig txog.

Pab
Cov terminals luv EN thiab COM kom ceev lub cev muaj zog kom teem ceev. Qhib lub ENABLE terminals mus rau ntug dej hiav txwv lossis nres lub cev muaj zog kom xoom nrawm. Xa mus rau DIP Hloov 3 hauv ntu Statup rau kev teeb tsa jumper. Yog tias tsis muaj qhov hloov pauv tau xav tau, xaim lub jumper ntawm terminals COM thiab EN. Tsis txhob siv lub tshuab ua kom muaj xwm txheej ceev.
Kev taw qhia
luv terminals DIR thiab COM los hloov cov kev taw qhia ntawm lub cev muaj zog. Yog tias tsis xav tau kev hloov pauv, cia qhov kev sib txuas no qhib.

Pib

SELECT SWITCHES
Xaiv Hloov (SW501)
Dip Hloov 1: ON - 115 VAC tso zis - Teeb 115 VAC tso zis nrog 115 lossis 230 VAC input.
OFF - 230 VAC Output - Teem lub 230 VAC tso zis nrog 115 lossis 230 VAC input.
Dip Hloov 1:
Dip Hloov 2: ON - 50 Hz - Teem lub hauv paus zaus ntawm 50 Hz ntawm cov zis.
OFF - 60 Hz - Teem lub hauv paus zaus ntawm 50 Hz ntawm cov zis.
Dip Hloov 1:
Dip Hloov 3: ON - Nres Hom - Qhib lub ENABLE hloov yuav nres lub cev muaj zog mus rau xoom nrawm nrog
DC Txhaj braking tsis siv lub decel ramp.
Dip Hloov 1:
OFF - Qhib Hom - Qhib qhov hloov pauv ENABLE yuav ua rau lub cev muaj zog nres.
Dip Hloov 4: ON - 1.6 kHz Cov Kab Mob Ntau zaus (Audible, tab sis tiv thaiv GFI tripping).
OFF - 16 kHz Carrier Frequency (Inaudible, tab sis tej zaum yuav ua rau GFI tripping).
Dip Hloov 1:

Pib
- Xyuas kom tseeb tias tsis muaj cov khoom siv hluav taws xob txawv teb chaws muaj nyob rau ntawm lub rooj tsav xwm luam tawm.
- Xyuas kom meej tias tag nrho cov keyboards thiab jumpers raug teeb tsa kom raug.

1. Tig lub ceev kho potentiometer puv counterclockwise (CCW) los yog teem lub analog input teeb liab rau 1. yam tsawg kawg nkaus.
2. Thov AC kab voltage.
3. Kaw qhov hloov pauv thiab xyuas kom meej tias lub zog ntsuab LED (IL1) yog flashing.
4. Maj mam ua ntej qhov ceev kho potentiometer clockwise (CW) los yog ua kom cov analog input teeb liab. Lub cev muaj zog yuav tsum ceev raws li lub potentiometer tig CW los yog raws li cov teeb liab analog tau nce. Mus mus kom txog rau thaum lub siab xav tau mus txog.
5. Tshem tawm AC kab voltage los ntawm tus tsav mus rau ntug dej hiav txwv lub cev muaj zog mus rau ib tug nres.

LEDs

Lub zog (IL1): Ntsuab LED yog khoom thaum AC kab voltage yog siv rau tus tsav, tab sis tus tsav yog neeg xiam. Nws flashes thaum twg AC kab voltage yog siv rau lub tsav thiab lub tsav yog enabled.
Status (IL2): Liab LED yog khoom thaum nyob rau hauv tam sim no txwv los yog flashes raws li txhaum cai:
2 Flashes: Undervoltage – Internal DC BUS voltage poob qis heev.
3 Flashes: Overvoltage – Internal DC BUS voltage sawv siab heev.
4 Flashes: Tam sim no txwv los yog luv luv Circuit Court - tus tsav nyob rau hauv tam sim no txwv los yog tau pom ib tug luv luv hla lub cev muaj zog.
5 flashes: Overtemperature Shut Down – Drive qhov kub tau mus txog qhov kub tseem ceeb.
6 Flashes: Overtemperature Warning – Tsav qhov kub thiab txias yog nce mus txog qhov kub tseem ceeb. Qhov siab tshaj plaws lub cev muaj zog tam sim no tau txo qis thaum tsav qhov kub nce.

Copyright 2018 los ntawm American Control Electronics® - All rights reserved. Tsis muaj ib feem ntawm cov ntaub ntawv no yuav raug muab rov ua dua lossis rov ua dua tshiab hauv txhua daim ntawv yam tsis muaj ntawv tso cai los ntawm American Control Electronics®. Cov ntaub ntawv thiab cov ntaub ntawv hauv cov ntaub ntawv no yuav raug hloov pauv yam tsis tau ceeb toom. American Control Electronics® ua tsis muaj kev lav phib xaub ntawm txhua yam hais txog cov khoom siv no, suav nrog, tab sis tsis txwv rau, kev lees paub ntawm nws cov khoom lag luam thiab kev nyab xeeb rau lub hom phiaj. American Control Electronics® xav tias tsis muaj lub luag haujlwm rau ib qho yuam kev uas yuav tshwm sim hauv daim ntawv no thiab tsis muaj kev cog lus los hloov kho lossis khaws cov ntaub ntawv tam sim no hauv daim ntawv no.

Kev ua haujlwm

MOTOR HOM
Hom lub cev muaj zog tau txais yog 3-theem induction, mus tas li cais capacitor (PSC), ncej ncej, thiab AC synchronous. Nws tsis pom zoo kom siv capacitor-pib hom motors.
PMF series yog tsim los ua kom muaj qhov sib txawv ntawm qhov ntau thiab tsawgtage mus txawv ib theem lub cev muaj zog ceev. Txawm li cas los xij, ib theem motors yog optimized rau kev khiav hauj lwm ceev thiab tej zaum yuav tsis ua hauj lwm nrog kev cia siab torque ntawm speeds uas tsis yog tag nrho rated ceev. Txij li thaum PMF muaj peev xwm hloov tau ib theem 115 VAC cov tswv yim rau hauv peb theem 230 VAC cov zis, nws raug nquahu kom siv peb theem motors hauv cov ntawv thov tshiab.

TSAV KEV COG LUS
Tib Theem Kev Ua Haujlwm - Tsis thim rov qab
Rau ib theem ua haujlwm, txuas lub cev muaj zog raws li qhia hauv daim duab hauv qab no. Xyuas kom meej tias lub prewired capacitor thiab nws cov coil txuas txuas nrog cov terminals U thiab V raws li qhia. Qhov kev sib txuas no tuaj yeem yog sab hauv yog tias siv 2-xaim lub cev muaj zog. Yog tias lub cev muaj zog muaj peb txoj hauv kev, koj yuav tsum ua qhov kev sib txuas ntawm koj tus kheej.Tib Theem Kev Ua Haujlwm - Rov qab
Tshem lub capacitor thiab txuas lub cev muaj zog raws li qhia hauv daim duab hauv qab no. Thaum tso cai rau kev hloov pauv ntawm lub xeev ruaj khov, cov txheej txheem txuas no yuav ua rau muaj kev ua haujlwm zoo tshaj plaws ntawm lub cev. Nyob ntawm kev tsim lub cev muaj zog thiab kev thov, lub cev muaj zog yuav tsum tau derated.

Peb Theem Kev Ua Haujlwm
Rau peb theem ua haujlwm, txuas lub cev muaj zog raws li qhia hauv daim duab hauv qab no. Txuas mus rau terminals U, V, thiab W raws li qhia.

Decelerate rau yam tsawg kawg nkaus los yog Zero Ceev
Cov kev hloov uas qhia hauv qab no yuav raug siv los ua kom lub cev muaj zog mus rau qhov tsawg kawg nkaus. Qhib qhov kev hloov ntawm S3 thiab lub potentiometer decelerates lub cev muaj zog los ntawm kev teem ceev mus rau qhov tsawg kawg nkaus ceev txiav txim los ntawm MIN SPEED trim lauj kaub teeb. Yog hais tias lub MIN SPEED trim lauj kaub yog teem tag nrho CCW, lub cev muaj zog decelerates mus rau xoom ceev thaum lub hloov tau qhib. Lub DECEL TIME trim lauj kaub teeb txiav txim siab tus nqi uas tus tsav decelerates. Los ntawm kev kaw qhov hloov pauv, lub cev muaj zog ua kom nrawm nrawm ntawm tus nqi txiav txim los ntawm ACCEL TIME trim lauj kaub.

Calibration

Yam tsawg kawg nkaus ceev (P1): MIN SPEED teeb tsa txiav txim siab qhov tsawg kawg nkaus lub cev muaj zog ceev thaum lub ceev hloov potentiometer los yog analog teeb liab yog teem rau yam tsawg kawg nkaus ceev (tag nrho CCW). Nws yog Hoobkas teem rau xoom ceev. Txhawm rau calibrate MIN SPEED:

1. Teem lub MIN SPEED trim lauj kaub puv CCW.
2.  Teem lub ceev kho potentiometer los yog analog teeb liab rau qhov tsawg kawg nkaus ceev.
3. Kho lub MIN SPEED trim lauj kaub kom txog rau thaum qhov xav tau yam tsawg kawg nkaus ceev tau mus txog lossis tsuas yog nyob ntawm qhov pib ntawm kev sib hloov.

Qhov siab tshaj plaws (P2): Qhov teeb tsa MAX SPEED txiav txim siab qhov siab tshaj plaws ntawm lub cev muaj zog thaum qhov ceev kho potenyiometer lossis analog teeb liab yog teem rau siab tshaj plaws. Nws yog Hoobkas teem rau siab tshaj plaws lub cev muaj zog ntsuas ceev. Txhawm rau calibrate MAX SPEED:

1. Teem lub MAX SPEED trim lauj kaub puv CCW.
2. Teem lub ceev kho potentiometer lossis analog teeb liab rau qhov siab tshaj plaws.
3. Kho lub MAX SPEED trim lauj kaub kom txog thaum lub siab xav tau siab tshaj plaws.

Txheeb xyuas MIN SPEED thiab MAX SPEED kev hloov kho atier recalibrating kom paub tseeb tias lub cev muaj zog khiav ntawm qhov xav tau yam tsawg kawg nkaus thiab siab tshaj plaws.
Acceleration (P3): ACCEL TIME teem txiav txim lub sij hawm lub cev muaj zog siv rau ramp mus rau qhov siab dua tsis hais kev taw qhia. Txhawm rau ntsuas lub sijhawm ACCEL, tig lub sijhawm ACCEL TIME trim lauj kaub CW txhawm rau ua kom lub sijhawm nrawm nrawm thiab CCW kom txo lub sijhawm nrawm nrawm.
Deceleration (P4): Lub sijhawm DECEL TIME teem txiav txim siab lub sijhawm lub cev muaj zog siv rau ramp mus rau qhov qis dua thaum raug txib los ntawm potentiometer lossis analog teeb liab, tsis hais txog kev taw qhia. Txhawm rau calibrate lub DECEL TIME, tig lub DECEL TIME trim lauj kaub CW kom lub sij hawm deceleration.

Slip Compensation (P5): Qhov teeb tsa SLIP COMP txiav txim siab txog qib uas lub cev muaj zog tau tuav tas li thaum lub cev muaj zog hloov pauv. Txhawm rau calibrate SLIP COMP:

1. Teem lub SLIP COMP trim lauj kaub puv CCW.
2. Ua kom lub nrawm kho potentiometer kom txog thaum lub cev muaj zog khiav ntawm midspeed yam tsis muaj kev thauj khoom. A 2. handheld tachometer yuav siv tau los ntsuas lub cev muaj zog ceev.
3. Load lub cev muaj zog rau nws qhov kev ntsuas tam sim no. Lub cev muaj zog yuav tsum qeeb.
4. Thaum tuav lub load ntawm lub cev muaj zog, tig lub SLIP COMP trim lauj kaub kom txog thaum lub cav khiav ntawm 4. qhov ceev ntsuas nyob rau hauv kauj ruam 2. Yog hais tias lub cev muaj zog oscillates (overcompensation), lub SLIP COMP trim 4. lub lauj kaub tej zaum yuav teem siab dhau lawm (CW). Tig lub SLIP COMP trim lauj kaub CCW kom ruaj khov lub cev muaj zog.
5. Unload lub cev muaj zog.

Voltage Boost (P6): VOLTAGE BOOST teeb tsa ua kom lub cev muaj zog torque ntawm qis ceev. Qhov kev teeb tsa yam tsawg kawg nkaus yog txaus rau feem ntau cov ntawv thov thiab tsis tas yuav hloov kho. Yog tias lub cev muaj zog nres lossis khiav tsis zoo ntawm qhov nrawm heev (hauv qab 10 Hz), lub lauj kaub boost trim yuav xav tau kev hloov kho.
Mus calibrate VOLTAGE BOOST:

1. Khiav lub cev muaj zog ntawm qhov qis tshaj txuas ntxiv ceev / zaus xav tau.
2. Nce VOLTAGE BOOST trim lauj kaub kom txog thaum lub cev muaj zog ua haujlwm zoo. Kev ua haujlwm tsis tu ncua dhau ntawm lub cev muaj zog qhov ntsuas tam sim no tuaj yeem ua rau lub cev muaj zog.

Torque (P7): TQ LIMIT teeb tsa txiav txim siab qhov siab tshaj plaws torque rau accelerating thiab tsav lub cev muaj zog.
Txhawm rau calibrate TQ LIMIT.

1. Nrog lub hwj chim disconnected los ntawm tus tsav, txuas RMS ammeter nyob rau hauv series nrog ib tug ntawm lub cev muaj zog ua.
2. Tig TQ LIMIT trim lauj kaub rau tag nrho CW. Siv lub zog thiab kho lub cev muaj zog kom nrawm nrawm.
3. Thauj lub cev muaj zog kom nws rub RMS tam sim no tau txiav txim siab dhau los.
4. Maj mam tig lub TQ LIMIT trim lauj kaub CCW kom txog thaum lub LED liab pib flickering. Tom qab ntawd tig lub lauj kaub me ntsis ntxiv kom nws tsuas yog pib txo lub cev muaj zog amps ntawm RMS ammeter.

Nres Voltage (P8): The brake voltage txiav txim siab voltage theem uas tus tsav yuav siv tam sim no rau DC Txhaj Txhaj Braking. siab dua voltage, qhov ntau tam sim no yuav lub cev muaj zog. DC Injection Braking tsuas yog tshwm sim hauv Braking Hom (Dip Hloov 3 = ON).
Nres Sijhawm Tawm (P9): Lub Sijhawm BRAKE-OUT txiav txim siab ntev npaum li cas DC Injection Braking tam sim no yuav siv tau thaum nres. DC Injection Braking tsuas yog tshwm sim hauv Braking Hom (Dip Hloov 3 = ON).

Cov ntaub ntawv / Cov ntaub ntawv

Minarik MDVF03 Qhib Chassis Microprocessor-Based Variable Frequency Drive [ua pdf] Tus tswv phau ntawv MDVF03 Qhib Chassis Microprocessor-Based Variable Frequency Drive, MDVF03, Qhib Chassis Microprocessor-Based Variable Frequency Drive, Microprocessor-Based Variable Frequency Drive, Variable Frequency Drive, Frequency Drive, Tsav

Cov ntaub ntawv

• Cov neeg siv phau ntawv