PS Injiniya IntelliPAX Intercom Fadada Rukunin Mai Amfani

Duk wani haɓakawa ko sake watsawa na wannan ɗaba'ar, ko kowane ɓangarensa, ba tare da rubutaccen izini na PS Engineering, Inc. an haramta shi ba. Don ƙarin bayani tuntuɓi Manajan Wallafa a PS Engineering, Inc., 9800 Martel Road, Lenoir City, TN 37772. Waya 865-988-9800 www.ps-engineering.com

200-250-0006 Shafi i Fabrairu 2022

Rev	Kwanan wata	Canza
0	Fabrairu 2022	Sabon littafin jagora don raka'a na yanzu

200-250-0006 Shafi i Fabrairu 2022

Sashi na I - Gabaɗaya Bayani

1.1 Gabatarwa

The IntelliPAX wani panel ne wanda aka ɗora, rukunin faɗaɗawar intercom mai wurare da yawa da ake amfani da shi don ƙara ƙarin tashoshi har shida zuwa tsarin intercom. Da fatan za a karanta wannan jagorar gaba ɗaya kafin shigarwa don rage haɗarin lalacewa ga naúrar kuma don sanin duk fasalulluka.

1.2 Girma

Wannan littafin ya ƙunshi shigarwa da umarnin aiki don raka'o'in Injiniyan PS masu zuwa: Lambar Siffar Model IntelliPAX Ƙungiyar haɓakawa ta intercom don sauran tsarin intercom/audio 11616 IntelliPAX Nesa Makafi-Mount Intercom Fadada naúrar 11616R IntelliPAX Nesa Makafi-Dutsen Intercom naúrar fadada na PMA8000E 11636R

1.3 Bayani

IntelliPAX (jerin 11616) ƙungiyar haɓaka ce ta intercom wacce ke aiki tare da PM1000II da PM1200 intercoms yayin da jerin 11636 ke aiki tare da PMA8000E da PAC45A. Waɗannan rukunan faɗaɗawa sun ƙunshi ka'idodin intercom na mallakar mallakar PS Injiniya, IntelliVox®. Wannan tsarin fasaha ce mai haƙƙin mallaka wanda ke ba da VOX ta atomatik ga kowane ɗayan makirufo guda shida, yana kawar da gyare-gyaren squelch na hannu. Saboda squelch ta atomatik, naúrar na iya zama makaho.

“R” yana tsara sigar da aka ɗora daga nesa.

Lambar ɓangaren 11636R an yi niyya don aiki tare da PMA8000E.

Sigar lambar “R” an tsara ta ne don hawa nesa, ko makaho.

1.4 Tushen Amincewa BABU *

Babu. Alhakin mai sakawa ne ya ƙayyade tushen amincewar wannan shigarwar. Ba a tsara wannan rukunin don amfani a kowane yanayi na ma'aikatan jirgin ba, kuma ba shi da wani tasiri akan kowane tsarin jirgin sama mai mahimmanci. Babu wani nauyi mai mahimmanci ko kayan lantarki da aka gabatar wa jirgin.

200-250-0006 Shafi 1-1 Fabrairu 2022

1.5 Takaddun bayanai

Ikon shigar da bayanai: daga babban naúrar Rashin Wutar kai: 150-1000 Ω Halin Sauti: <10% @ 35mW zuwa 150 Ω ɗora Kwatancen Radiyon Jirgin Sama: 1000 Ω Amsa Mitar Mic 3 dB na al'ada: 350 Hz — 6000 Hz 3 dB Amsar Mitar Kiɗa: 200 Hz zuwa 15 kHz Nauyin Raka'a: 7.2 Ounces (0.20 kg) Girma: 1.25″ H x 3.00″ H x 5.50″ H x 3.2″ x 6.6 W x 14 XNUMX cm) 1.6 Ana buƙatar kayan aiki amma ba a kawo su ba

A. belun kunne, 150Ω sitiriyo, har zuwa shida kamar yadda ake bukata

B. Microphones, har zuwa shida, kamar yadda ake buƙata

C. Wayoyin haɗin kai

D. Intercom, PAC24, ko PMA7000, rukunin farko

E. Makullan kunne da makirufo (har zuwa 6, kamar yadda ake buƙata)

200-250-0006 Shafi 1-2 Fabrairu 2022

Sashi na II - Shigarwa

2.1 Gabaɗaya Bayani

The IntelliPAX ya zo tare da duk kayan aikin da ake buƙata don shigarwa na yau da kullun. An shigar da naúrar ko dai a cikin panel (11606, 11616, 11626) ko kuma an saka shi a makance (11606R, 11616R, 11626R, 11636R ko 11645). Idan panel ɗin ya ɗora, ana iya shigar dashi kusa da babban rukunin, ko kusa da fasinjoji. Idan makaho ya hau, ana iya dora shi kusan ko'ina. Na'urar sarrafa ƙarar 11606R da 11616R don fasinjoji an saita masana'anta don daidaitaccen fitarwa, amma ana iya daidaita filin ta ramukan da ke gefen sashin.

Shigarwa na IntelliPAX, Yin amfani da wadatattun wayoyi da kayan aikin da aka kawo, baya buƙatar kayan aiki na musamman ko ilimi banda wanda aka kwatanta a cikin 14 CFR 65.81(b) da FAA Advisory Circular 43.13-2B

Alhakin mai sakawa ne ya tantance tushen amincewar wannan shigarwar. FAA Form 337, ko wani yarda mai yiwuwa a bukata. Duba Karin Bayani na B don exampBayani na FAA Form 337.

2.2 Buɗe kaya da dubawa na farko

The IntelliPAX an bincika a hankali ta hanyar injiniya kuma an gwada shi sosai ta hanyar lantarki kafin jigilar kaya. Ya kamata ya zama mara lahani na lantarki ko na kwaskwarima.

Bayan an karɓa, tabbatar da cewa kayan aikin sassa sun haɗa da masu zuwa:

250-250-0000 IntelliPAX Kit ɗin Shigar da Dutsen Panel

250-250-0001 Kit ɗin Shigar da Dutsen Nesa na IntelliPAX

		250-250-0000	250-250-0001
Lambar Sashe	Bayani	11616	11616R	11636R
475-442-0002	# 4-40 Injin sukurori, baki	2
625-003-0001	Soft Touch Knob “D” shaft	1
575-250-0001	IntelliPAX Faceplate	1
425-025-0009	25 pin Sub-D mai haɗa harsashi	1	1	1
425-020-5089	Nazari Na Maza	25	25	25
625-025-0001	Hood mai haɗi	1	1	1
475-002-0002	Haɗin Yatsa	2	2	2

Hakanan, PM1000II w/Crew faceplate, P/N 575-002-0002 an haɗa shi tare da raka'a faɗaɗa intercom, Sashe na Lissafi 11616, 11616R, 11636R

200-250-0006 Shafi 2-1 Fabrairu 2022

2.3 Hanyoyin shigarwa na kayan aiki

KADA KA KYAUTA

Don shigar da panel (11616,)

Yin amfani da samfurin, tona ramuka uku a cikin rukunin kayan aiki a wurin da ya dace da matukin jirgi ko matsayi(s) fasinjoji.
Saka IntelliPAX daga bayan kayan aikin kayan aiki, daidaita ramukan don kullun.
Sanya farantin karfen aluminium a kan madaidaicin ƙulli kuma amintacce, ta amfani da sukulan zagaye na # 4-40 da aka bayar.
Shigar da kullin ƙara a kan ramukan sarrafa ƙara.

Hawan makafi: (11616R, 11636R)

Shigar da naúrar a kan shiryayye na jiragen sama ko wani tsarin da ya dace.
Idan ana so, ana iya daidaita ƙarar a lokacin shigarwa, akwai ramuka biyu a gefen naúrar, ɗaya don hagu, wani kuma don tashar dama.
Idan ana so, ana iya shigar da maɓalli mai nisa (ba a haɗa shi ba) don ƙetare aikin SoftMute™. Wannan ya kamata ya kasance mai dacewa ga fasinjoji.

2.4 Wayar da igiyar igiya

Don kammala shigarwa, dole ne a yi kayan aikin waya kamar yadda aka nuna a shafi na C. Injiniyan PS na iya yin kayan aikin wayoyi na musamman don mai sakawa. Duk kayan harnesses suna amfani da abubuwan haɓaka ingancin Mil-spec tare da dabarun ƙwararru, kuma an gwada su gaba ɗaya kafin jigilar kaya. Tuntuɓi Injiniya na PS don ƙarin bayani. IntelliPAX yana haɗi zuwa babban naúrar ta hanyar 4- ko 5-conductor, kebul mai kariya.

2.4.1 Abubuwan Hayaniyar Lantarki

GARGAƊI: Dole ne ku yi amfani da kebul masu kariya daban don makirufo da jakunan kunne. Haɗin waɗannan wayoyi guda biyu ZAI haifar da ƙara mai ƙarfi da ƙasƙantar aikin intercom. Juyawa tana faruwa ne ta hanyar haɗin kai tsakanin babban siginar wayar kai da ƙaramar siginar makirufo. Sakamakon da aka samu shine ƙarar murya mai girma wanda ya bambanta tare da sarrafa ƙarar.

Garkuwa na iya kare tsarin daga hayaniya mai haske (tambarin juyawa, kayan wuta, da sauransu). Koyaya, haɗin shigarwa yana faruwa inda ƙaramin tsangwama zai yiwu. The IntelliPAX an ƙera shi a cikin tsangwama-kariyar chassis kuma yana da masu ƙarfin tacewa na ciki akan duk layin shigarwa.

Hayaniyar madauki na ƙasa yana faruwa ne lokacin da akwai hanyoyi biyu na dawowa daban-daban don sigina ɗaya, kamar firam ɗin jirgin sama da wayar dawo da ƙasa. Manya-manyan lodin keken keke kamar strobes, inverters, da sauransu, na iya allurar sigina masu ji a kan hanyar dawowar jirgin sama. Bi zanen wayoyi a hankali don taimakawa tabbatar da ƙarancin madauki na ƙasa. Sigina masu haskakawa na iya zama dalili lokacin da ƙananan sigina na mic suka haɗe tare da wayoyi masu ɗaukar wuta na yanzu. Ka ware waɗannan igiyoyi.

Insulating washers ne ake bukata a kan duk mic da jakunan kunne don ware su daga filin jirgin sama.

200-250-0006 Shafi 2-2 Fabrairu 2022

2.4.2 Abubuwan Buƙatun Wuta

The IntelliPAX an ƙera shi don yin aiki tare da babban rukunin intercom. Babu wani iko da ake buƙata. An haɗa naúrar Tsaya Alone zuwa mai karyawar 1A zuwa bas ɗin jiragen sama (2A na dual).

2.4.3 Haɗin kai tare da babban naúrar

Mu'amala tsakanin IntelliPAX da babban intercom yana ta hanyar kebul mai kariya mai waya 4.

Aiki	IntelliPA X	PM1200	Saukewa: PM1000II	PMA8000C & Saukewa: PMA8000E Fadada 1	Saukewa: PMA8000E Fadada 2
Fadadawa Ƙarfi	1	8	15	J2-41	J2 41
Fadadawa Kasa	14	4	2	J2-38	J2 38
Shigar Audio (rt) Shigar Audio (lt)	2 15	13	16	J1-41 J1-40	J1 41 J1 40
Fitar Audio	3	3	3	J2-37	J2 37

2.4.4 Abubuwan Taimako

Ana iya haɗa na'urar nishaɗi zuwa ga IntelliPAX. Sanya jakin kiɗan 1/8 ″ dacewa da fasinjoji don haɗa na'urar nishaɗin sitiriyo a cikin tsarin. An shigar da tsarin "Soft Mute" a cikin IntelliPAX wanda zai kashe kidan yayin tattaunawa akan intercom na gida. Zirga-zirgar rediyo ko tattaunawa akan babban intercom ba zai kashe kidan.

Na biyu, ana ba da shigarwar monaural don wasu dalilai, kamar taƙaitaccen gidan adireshi na jama'a, ko samar da hanyar sadarwa ta rediyo don lokuta inda intercom ba ta da rediyo akan bas ɗin faɗaɗawa (PM1000D don tsohonample).

NOTE:

The PM1000D bai dace da shigarwar kiɗa ba, saboda ƙwararrun yanayi. Idan ana amfani da wannan, haɗa shigarwar nishaɗi zuwa IntelliPAX (11626) kaɗai.

Za'a iya shigar da maɓalli mai laushi mai hana na bebe (ba a haɗa shi ba) tsakanin masu haɗin haɗin IntelliPAX 12 da 24. Rufe wannan sauya yana sanya IntelliPAX cikin yanayin Karoake.

GARGADI: Oscillators na gida da sauran sigina na ciki daga CD ko kayan aikin rediyo na iya haifar da tsangwama mara amfani da kewayawa VHF da kayan sadarwa. Kafin tashin, yi amfani da na'urar nishaɗi don tantance ko akwai wani mummunan tasiri akan tsarin jirgin. Idan an lura da wani sabon aiki a cikin jirgin, nan da nan kashe na'urar nishaɗi.

200-250-0006 Shafi 2-3 Fabrairu 2022

2.5 Bikin Shigarwa Bayan Shigarwa

Bayan an gama wayoyi, tabbatar da cewa wutar tana kan fil 1 ne kawai na mahaɗin, kuma ƙasa a kan fil 14 (tare da babban naúrar aiki. Rashin yin hakan zai haifar da mummunar lalacewa ta ciki da rashin garantin Injiniyan PS. Tare da duk na'urorin da aka toshe suna aiki. tabbatar da cewa duk tashoshi masu aiki zasu iya sadarwa akan intercom, kuma kowane tushen kiɗa yana nan, kuma SoftMute yana hana sarrafawa yana aiki daidai (idan an shigar dashi).

200-250-0006 Shafi 2-4 Fabrairu 2022

Sashi na III - AIKI

3.1 Ƙarfi

Canjawa kan intercom ko panel audio yana kunna naúrar IntelliPAX ta atomatik. Naúrar Tsaya Alone tana aiki lokacin da aka yi amfani da wuta akan Bus ɗin Avionics.

3.2 Daidaita ƙarar

Ikon ƙarar 11616 yana rinjayar naúrar kai kawai da aka haɗa da IntelliPAX kai tsaye, kuma ba babban sashin ba. Sifofin Nesa (11616R) suna da ƙarar daidaitacce sabis, wanda ake samun dama ta hanyar buɗaɗɗen buɗaɗɗiya a gefen naúrar. Waɗannan su ne 20-juya potentiometers, don haka na iya buƙatar juyi da yawa don yin bambanci. An saita ƙarar zuwa iyakar a masana'anta. Masu amfani za su iya rage ƙarar a ɗayan naúrar kai na sitiriyo.

Don P/N 11636R da ke aiki tare da PMA8000E na kwafi, ikon sarrafa ƙarar Fasinja na fasinja mai jiwuwa (PASS) yana rinjayar ƙarar faɗaɗa intercom.

3.3 IntelliVox® Squelch

Babu daidaitawa na IntelliVoxAna buƙatar sarrafa squelch ko mai yiwuwa. Ta hanyar na'urori masu zaman kansu akan kowane makirufo, hayaniyar yanayi da ke bayyana a cikin duk makirufo yana kasancewa koyaushe.ampjagoranci. An katange siginonin marasa murya. Lokacin da wani yayi magana, da'irar makirufo ɗinsu kawai ke buɗewa, suna sanya muryar su akan intercom.

Don mafi kyawun aiki, makirufo na lasifikan kai dole a sanya a cikin ¼ inci na lebbanka, zai fi dacewa da su. Hakanan yana da kyau a kiyaye makirufo daga hanyar iska kai tsaye. Matsar da kan ku ta rafin iska na iya haifar da IntelliVox® don buɗewa na ɗan lokaci. Wannan al'ada ce.

PS Engineering, Inc. yana ba da shawarar shigar da Kit ɗin Muff na Marufo daga Oregon Aero (1-800-888-6910). Wannan zai inganta IntelliVox® aiki.

3.4 Mutuwar Kiɗa

Idan an shigar da maɓalli mai nisa tsakanin fil 12 da 24, za a kunna "SoftMute". Lokacin da aka rufe maɓalli, kiɗan za ta yi shiru a duk lokacin da aka sami tattaunawa ta intercom a cikin IntelliPAX. Sautin da ke fitowa daga babban naúrar, kamar rediyo ko intercom, ba zai kashe kiɗan IntelliPAX ba.

Bude maɓalli yana sanya kiɗan naúrar, "Yanayin Karaoke," kuma an hana musanya kiɗa.

Don 11606 da PMA7000-Series, sauti na intercom a cikin sashin haɓakawa ba zai bebe music a cikin audio panel.

200-250-0006 Shafi 3-1 Fabrairu 2022

Sashi na IV Garanti da Sabis

4.1 Garanti

Domin garantin masana'anta ya kasance mai aiki, dole ne a cika shigarwar a cikin ƙwararrun jirgin sama ta wani shago mai shedar FAA da dillalin Injiniya na PS. Idan wanda bashi da takaddun shaida ke shigar da naúrar a cikin jirgin gwaji na gwaji, dole ne a yi amfani da kayan aikin dila don garantin ya kasance mai inganci.

PS Engineering, Inc. yana ba da garantin wannan samfurin don zama 'yanci daga lahani a cikin kayan aiki da aiki na tsawon shekara guda daga ranar siyarwa. A cikin wannan lokacin garanti na shekara ɗaya, PS Engineering, Inc., a zaɓinsa, za ta aika madaidaicin naúrar a kuɗin mu idan an ƙayyade naúrar tana da lahani bayan tuntuɓar masanin masana'anta.

Wannan garanti ba za a iya canjawa wuri ba. Duk wani garanti mai ma'ana ya ƙare a ranar ƙarewar wannan garanti. Injiniyan PS BA ZAI IYA HANNU DON LALACEWA KO SAKAMAKO BA. Wannan garantin baya rufe lahani wanda ya samo asali daga rashin dacewa ko rashin amfani ko kulawa kamar yadda muka ƙaddara. Wannan garantin ya ɓace idan akwai wani yunƙurin rarraba wannan samfur ba tare da izinin masana'anta ba. Wannan garantin yana ba ku takamaiman haƙƙoƙin doka, kuma kuna iya samun wasu haƙƙoƙi waɗanda ƙila su bambanta daga jiha zuwa jiha. Wasu jihohi ba sa ba da izinin keɓance iyakancewar lalacewa ko lalacewa, don haka iyakancewa ko keɓantawa na sama ƙila ba za ta shafi ku ba.

4.2 Sabis na Masana'antu

The IntelliPAX an rufe shi da garanti mai iyaka na shekara guda. Duba bayanin garanti. Tuntuɓi PS Engineering, Inc. a 865-988-9800 or www.ps-engineering.com/support.shtml kafin ka dawo naúrar. Wannan zai ba da ma'aikacin sabis damar ba da duk wasu shawarwari don gano matsalar kuma ya ba da shawarar mafita.

Bayan tattauna matsalar tare da ma'aikacin kuma kun sami Lambar Izinin Komawa, jigilar samfur ta hanyar dillali da aka yarda (kada ku aika saƙon Amurka) zuwa:

PS Engineering, Inc. girma

Ma'aikatar Sabis na Abokin ciniki

9800 Martel Road

Lenoir City, TN 37772

865-988-9800 FAX 865-988-6619

200-250-0006 Shafi 4-1 Fabrairu 2022

Shafi A Umarnin don Form 337 na FAA da cancantar iska

5.1 Sampda rubutu don FAA Form 337

Ɗaya daga cikin hanyoyin amincewar iska shine ta hanyar FAA Form 337, Babban Gyarawa da Canji (Airframe, Powerplant, Propeller, ko Appliance) A cikin yanayin lambar ɓangaren IntelliPAX 116( ), kuna iya amfani da rubutu mai zuwa azaman jagora.

Shigar da naúrar haɓakawa ta intercom, PS Engineering IntelliPAX, lambar ɓangaren 11616 in ( wuri ) a tasha . An shigar da AC43.13-2B, Babi na 2, An shigar da kowane Injiniyan PS Manual Masu Gudanarwa p/n 200-250-xxxx, bita X, kwanan wata ( ).

Hannun hanyar sadarwa zuwa tsarin sauti na yanzu daidai da littafin shigarwa kuma cikin yarda da ayyukan da aka jera a ciki Saukewa: AC43.13-2B, Babi na 2. Duk wayoyi Mil-Spec 22759 ko 27500. Ba a buƙatar haɗi zuwa bas ɗin dimmer na jirgin sama. Babu ƙarin haɗi zuwa ƙarfin jirgin sama.

Jerin kayan aikin jirgin sama, nauyi da ma'auni da aka gyara. An duba biyan diyya. Kwafin umarnin aiki, wanda ke ƙunshe a cikin takaddun Injiniya na PS 200-250- ( ), bita ( ), Kwanan wata ( ), ana sanya shi a cikin bayanan jirgin. Duk kayan aikin da aka yi an jera su a cikin Tsarin Aiki .

5.2 Umarni don Ci gaba da cancantar iska:

Sashe	Abu	Bayani
1	Gabatarwa	Shigar da tsarin sadarwar fasinja.
2	Bayani	Shigarwa kamar yadda aka bayyana a cikin jagorar shigarwa na masana'anta da aka yi magana akan FAA Form 337, gami da dubawa tare da sauran sauti na avionics kamar yadda ake buƙata.
3	Sarrafa	Duba shigarwa da jagorar mai aiki da aka ambata akan FAA Form 337.
4	Hidima	Babu Wanda ake buƙata
5	Umarnin Kulawa	Kan Sharadi, babu umarni na musamman
6	Shirya matsala	A yayin matsalar naúrar, sanya babban naúrar cikin “KASHE,” yanayin rashin aminci. Wannan yana ba da damar sadarwar matukin jirgi na yau da kullun ta amfani da COM 1. Bi umarnin biya a cikin littafin shigarwa da aka yi nuni akan Form na FAA 337. Don takamaiman laifin naúrar, tuntuɓi mai ƙira a 865-988-9800 don umarni na musamman.
7	Cirewa da sauyawa bayani	Cire: Cire maɓallin ƙara (idan an sanye shi (11606, 11616), 2 ea. sannan # 4-40 baƙaƙen injin baƙar fata yana hawa naúrar. Cire naúrar daga bayan panel. Shigarwa: Daidaita madaidaicin madaurin ƙarar (idan an sanye shi, 11606, 11616) da ramukan hawa tare da panel da farantin gaba. Amintaccen amfani da 2 ea. # 4-40 baki sukurori, bayar.
8	zane-zane	Bai dace ba
9	Bukatun dubawa na musamman	Ba a Aiwatar da shi ba
10	Magungunan Kariya	Ba a Aiwatar da shi ba
11	Bayanan Tsari	Ba a Aiwatar da shi ba
12	Kayan aiki na Musamman	Babu
13	Ba a Aiwatar da shi ba	Ba a Aiwatar da shi ba
14	Shawarwari Tsawon Lokaci	Babu
15	Iyakar cancantar iska	Ba a Aiwatar da shi ba
16	Bita	Don tantancewa ta mai sakawa

200-250-0006 Shafi A Fabrairu 2022

Rataye B Shigarwa A

Bayanin Bayanin Waya C

Hoto 1 IntelliPAX Wiring (11616, 11616R, 11636R)

Hoto 2 - Fadada Faɗawa tare da PMA8000C ko PMA8000E

Takardu / Albarkatu

PS Injiniya IntelliPAX Intercom Expansion Unit [pdf] Manual mai amfani
IntelliPAX, Intercom Expansion Unit, IntelliPAX Intercom Expansion Unit, Expansion Unit

Magana

Manual mai amfani

IntelliPAX Intercom Expansion Unit