Q-SYS X10 Server mojuto ero isise

Alaye ti awọn ofin ati aami

• Ọ̀rọ̀ náà “Ìkìlọ̀!” tọkasi awọn ilana nipa aabo ti ara ẹni. Ti awọn ilana naa ko ba tẹle, abajade le jẹ ipalara ti ara tabi iku.
• Ọrọ naa “Iṣọra!” tọkasi awọn itọnisọna nipa ibajẹ ti o ṣeeṣe si awọn ohun elo ti ara. Ti awọn ilana wọnyi ko ba tẹle, o le ja si ibajẹ si ẹrọ ti o le ma bo labẹ atilẹyin ọja.
• Ọrọ naa “PATAKI!” tọkasi awọn ilana tabi alaye ti o ṣe pataki si aṣeyọri aṣeyọri ti ilana naa.
• Oro naa “AKIYESI” ni a lo lati tọka si alaye afikun iwulo.

Filaṣi monomono pẹlu aami ori itọka ninu igun onigun kan ṣe itaniji olumulo si wiwa volol eewu ti ko ni aabotage laarin awọn ọja ká apade ti o le je kan ewu ti ina-mọnamọna si eda eniyan.

The exclamation point within a triangle alerts the user to the presence of important safety, operating, and Maintenance instructions in this manual.

PATAKI AABO awọn ilana

1. Ka, tẹle, ki o si pa awọn ilana wọnyi mọ.
2. Tẹtisi gbogbo awọn ikilọ.
3. Maṣe lo ohun elo yii nitosi omi.
4. Mọ pẹlu asọ gbigbẹ nikan.
5. Ma ṣe dina eyikeyi ṣiṣi afẹfẹ. Fi sori ẹrọ ni ibamu si awọn ilana olupese.
6. Maṣe fi sori ẹrọ nitosi awọn orisun ooru gẹgẹbi awọn imooru, awọn iforukọsilẹ ooru, awọn adiro, tabi awọn ohun elo miiran (pẹlu ampliifiers) ti o gbe ooru jade.
7. Lo awọn asomọ/awọn ẹya ara ẹrọ ti olupese pato.
8. Tọkasi gbogbo iṣẹ si awọn oṣiṣẹ iṣẹ ti o peye.
9. Tẹmọ gbogbo awọn koodu agbegbe to wulo.
10. Kan si alagbawo ti o ni iwe-aṣẹ, ẹlẹrọ alamọdaju nigbati eyikeyi iyemeji tabi awọn ibeere dide nipa fifi sori ẹrọ ti ara.

Itọju ati Titunṣe

IKILO!: Advanced technology, e.g., the use of modern materials and powerful electronics, requires specially adapted maintenance and repair methods. To avoid the danger of subsequent damage to the apparatus, injuries to persons and/or the creation of additional safety hazards, all maintenance or repair work on the apparatus should be performed only by a QSC authorised service station or an authorised QSC International Distributor. QSC is not responsible for any injury, harm or related damages arising from any failure of the customer, owner or user of the apparatus to facilitate those repairs.
IKILO! The Server Core X10 is designed for indoor installation only.

IKILO BATIRI LITHIUM
IKILO!: ORO YI NI BATERI LITHIUM KI A SE GBAGBARA NI. LITHIUM JE KAMIKIKA TI A MO SI IPINLE CALIFORNIA LATI JE KI AJẸ AJẸ TABI ALAIKẸRẸ IBIBI. BATTERIA LITHUM TI A SE GBAGBAJA TI O WA NINU ERO YI LE JADE TI O BA HAN SI INA TABI IGBONA. MAA ṢE KURO YI BATIRI NAA. Ma ṣe gbidanwo lati tun gba agbara si batiri LITHium ti kii ṣe gbigba agbara. EWU IBIBUGBA WA TI BATI BATI PAPO ORISI TI KOTO.

Awọn pato Ayika

• O ti ṣe yẹ Ọja Igbesi aye ọmọ: 10 ọdun
• Ibi ipamọ otutu Ibi ipamọ: -40°C si +85°C (-40°F si 185°F)
• Ibi ipamọ ọriniinitutu Ibi ipamọ: 10% si 95% RH @ 40°C, ti kii-condensing
• Iwọn otutu Iṣiṣẹ: 0°C si 40°C (32°F si 104°F)
• Ibiti ọriniinitutu ti nṣiṣẹ: 10% si 95% RH @ 40°C, ti kii ṣe aropo

Ibamu Ayika
Q-SYS complies with all applicable environmental regulations. This includes (but is not limited to) global environmental laws, such as the EU WEEE Directive (2012/19/EU), China RoHS, Korean RoHS, U.S. Federal and State Environmental Laws and various resource recycling promotion laws around the world. For more information, visit: qsys.com/about-us/green-statement.

Gbólóhùn FCC

The Q-SYS Server Core X10 has been tested and found to comply with the limits for a Class A digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used according to the instruction manual, it may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference; in which case, the user will be required to correct the interference at his own expense.

Awọn Gbólóhùn RoHS
The QSC Q-SYS Server Core X10 complies with the European RoHS Directive.
The QSC Q-SYS Server Core X10 complies with “China RoHS” directives. The following table is provided for product use in China and its territories.
Ayẹwo EFUP jẹ ọdun 10. Asiko yii da lori paati kukuru tabi ikede EFUP subssembly ti a lo ninu awọn apẹrẹ ọja Server Core X10.

QSC Q-SYS Server mojuto X10
This table is prepared following the requirements of SJ/T 11364.
O: Tọkasi pe ifọkansi ti nkan na ni gbogbo awọn ohun elo isokan ti apakan wa ni isalẹ ala ti o yẹ ti a sọ ni GB/T 26572.
X: Indicates that the concentration of the substance in at least one of the homogeneous materials of the part is above the relevant threshold, as specified in GB/T 26572. (Replacement and reduction of content cannot be achieved currently because of technical or economic reasons.)

Kini o wa ninu Apoti naa?

• Q-SYS Server Core X10
• Ohun elo Ẹya (Awọn imudani Eti ati ohun elo ohun elo iṣinipopada iṣagbesori)
• Power cable, appropriate tothe  region
• Alaye atilẹyin ọja, TD-000453-01
• Alaye Aabo & Awọn Gbólóhùn Ilana, TD-001718-01

Ọrọ Iṣaaju

The Q-SYS Server Core X10 represents the next generation of Q-SYS processing, pairing the Q-SYS OS with off-the-shelf, enterprise-grade IT server hardware to deliver a flexible and scalable audio, video, and control solution for a vast range of applications. Server Core X10 is a fully networked, programmable AV&C processor that provides centralised processing for multiple spaces or zones while distributing network I/O where it’s most convenient.
AKIYESI: The Q-SYS Server Core X10 processor requires Q-SYS Designer Software (QDS) for configuration and operation. QDS version compatibility information can be found here. Information about the QDS components related to the Server Core X10, including their properties and controls, can be found in Q-SYS Help at iranlọwọ.qsys.com. Or, simply drag a Server Core X10 component from the Inventory into the Schematic and press F1.

Awọn isopọ ati Callouts

Iwaju Panel

1. Imọlẹ agbara: tan imọlẹ buluu nigbati ẹrọ naa ba wa ni titan.
2. Front-panel display: displays pertinent information about the core, such as its network configuration, the system it is running, active faults, etc.
3. Navigation buttons (up, down, left, right): allow the user to navigate through the menus on the front panel  display:
   • a. Mejeeji awọn bọtini oke ati ọtun ni ilosiwaju si ohun akojọ aṣayan atẹle.
   • b. Mejeeji awọn bọtini isalẹ ati osi pada si ohun akojọ aṣayan iṣaaju.
4. ID/Select button: Press the centre button to put the Core into ID mode for identification within Q-SYS Designer Software. Press again to turn off ID mode.

Pada nronu

1. HDMI ibudo: ko ni atilẹyin.
2. USB A ati awọn ebute oko USB C: ko ni atilẹyin.
3. Serial communications RS232 (male DB-9): for connecting to serial devices.
4. Q-SYS LAN ibudo (RJ45): lati osi si otun; ila oke ni LAN A ati LAN B, ila isalẹ jẹ LAN C ati LAN D.
5. Ẹka ipese agbara (PSU).

Fifi sori ẹrọ

Awọn ilana atẹle yii ṣe alaye bi o ṣe le fi awọn imudani eti sori ẹrọ ati awọn ẹya ẹrọ iṣinipopada ifaworanhan sori ẹnjini eto ati sinu agbeko.

Eti Handle fifi sori
To install the pair of mounting ears and handles in the accessory box, insert the provided screws into the front-right and front-left mounting ears, and fasten them.

Ifaworanhan Rail Igbaradi

1. Tu iṣinipopada inu silẹ lati inu iṣinipopada ita.
   • a. Fa iṣinipopada inu titi ti o fi duro.
   • b. Tẹ lefa itusilẹ lori iṣinipopada inu lati yọ kuro.
2. So iṣinipopada inu si ẹnjini naa.
3. Tẹ iṣinipopada inu ti o tu silẹ lodi si ẹnjini ti olupin tabi eto AV. Lẹhinna gbe agekuru naa (A) ki o si rọra iṣinipopada inu si ẹhin ẹnjini (B).

Agbeko Rail fifi sori

Awọn agbeko olupin

1. Gbe awọn lefa lori awọn lode iṣinipopada. Ṣe ifọkansi pin agbeko agbeko ni ifiweranṣẹ iwaju agbeko ki o tẹ siwaju lati tiipa.
2. Gbe lefa lẹẹkansi. Ṣe afiwe pin agbeko ẹhin si ifiweranṣẹ agbeko ki o fa sẹhin lati tii ẹhin iṣinipopada ita.

AV agbeko

1. Mú iwaju iṣinipopada ita pẹlu awọn ihò iṣagbesori iyipo AV agbeko. Fi sii ati Mu # 10-32 agbeko skru (meji fun ẹgbẹ).
2. Tun awọn igbesẹ fun ẹhin.

Fifi sori ẹrọ System
Gbe eto naa sori agbeko:

1. Rii daju pe imuduro ti o ni bọọlu ninu iṣinipopada ita ti wa ni titiipa ni ipo iwaju.
2. Fa iṣinipopada arin jade kuro ni iṣinipopada ita titi ti o fi di titiipa.
3. Mu awọn afowodimu inu eto naa pọ (ti o somọ ni awọn igbesẹ iṣaaju) pẹlu iṣinipopada arin ki o Titari eto naa ni kikun sinu agbeko titi yoo fi tii.

Lode Rail yiyọ

1. Lati yọ iṣinipopada ita kuro ni agbeko, tẹ latch itusilẹ ni ẹgbẹ ti iṣinipopada naa.
2. Gbe iṣinipopada jade lati inu agbeko iṣagbesori.

Ipilẹ Imọ
Wa awọn idahun si awọn ibeere ti o wọpọ, alaye laasigbotitusita, awọn imọran, ati awọn akọsilẹ ohun elo. Ọna asopọ lati ṣe atilẹyin awọn eto imulo ati awọn orisun, pẹlu Iranlọwọ Q-SYS, sọfitiwia ati famuwia, awọn iwe aṣẹ ọja, ati awọn fidio ikẹkọ. Ṣẹda awọn igba atilẹyin.
atilẹyin.qsys.com

Onibara Support
Tọkasi oju-iwe Kan si Wa lori Q-SYS webAaye fun Atilẹyin Imọ-ẹrọ ati Itọju Onibara, pẹlu awọn nọmba foonu wọn ati awọn wakati iṣẹ.
qsys.com/contact-us/

Atilẹyin ọja
Fun ẹda QSC Atilẹyin Lopin, lọ si:
qsys.com/support/warranty-statement/

2025 QSC, LLC Gbogbo ẹtọ wa ni ipamọ. QSC, aami QSC, Q-SYS, ati aami Q-SYS jẹ aami-iṣowo ti a forukọsilẹ ti QSC, LLC ni Ọfiisi Itọsi ati Iṣowo AMẸRIKA ati awọn orilẹ-ede miiran. Awọn itọsi le wa ni loo fun tabi ni isunmọtosi ni. Gbogbo awọn aami-išowo miiran jẹ ohun-ini ti awọn oniwun wọn. qsys.com/patents.
qsys.com/trademarks

Awọn iwe aṣẹ / Awọn orisun

Q-SYS X10 Server mojuto ero isise [pdf] Afowoyi olumulo WA-001009-01, WA-001009-01-A, X10 Server Core Processor, X10, Server Core Processor, Core Processor, Processor

Awọn itọkasi

• Itọsọna olumulo