Q-SYS X10 Server Core Processor
Nkowa okwu na akara
- Okwu a bụ "ỊDỌ AKA NA NTỊ!" na-egosi ntuziaka maka nchekwa onwe onye. Ọ bụrụ na esoghị ntuziaka a, ihe ga-esi na ya pụta nwere ike ịbụ mmerụ ahụ ma ọ bụ ọnwụ.
- Okwu a bụ "Ịkpachara anya!" na-egosi ntuziaka maka mmebi akụrụngwa anụ ahụ nwere ike imebi. Ọ bụrụ na esoghị ntuziaka ndị a, ọ nwere ike bute mmebi akụrụngwa nke enweghị ike kpuchie n'okpuru akwụkwọ ikike.
- Okwu a bụ "Mkpa!" na-egosi ntuziaka ma ọ bụ ozi dị mkpa maka imecha usoro a nke ọma.
- A na-eji okwu ahụ bụ "MKWUO" gosipụta ozi ndị ọzọ bara uru.
Ọkụ ọkụ nke nwere akara isi akụ na triangle na-eme ka onye ọrụ mara na ọnụnọ vol na-enweghị mkpuchi.tage n'ime mkpuchi ngwaahịa nke nwere ike bụrụ ihe egwu nke ujo eletrik nye ụmụ mmadụ.
The exclamation point within a triangle alerts the user to the presence of important safety, operating, and Maintenance instructions in this manual.
Ntuziaka nchekwa dị mkpa
- Gụọ, soro, ma debe ntuziaka ndị a.
- Ṅaa ntị n'ịdọ aka ná ntị niile.
- Ejila ngwa a n'akụkụ mmiri.
- Jiri akwa kpọrọ nkụ hichaa naanị.
- Do not block any ventilation opening. Install according to the manufacturer’s instructions.
- Awụnyela n'akụkụ ebe okpomọkụ ọ bụla dị ka radiators, ndekọ okpomọkụ, stovu, ma ọ bụ ngwa ndị ọzọ (gụnyere amplifiers) nke na-emepụta okpomọkụ.
- Jiri naanị mgbakwunye / ngwa ndị nrụpụta akọwapụtara.
- Tụtụ aka n'aka ndị ọrụ ruru eru.
- Soro koodu mpaghara niile dị.
- Consult a licensed, professional engineer when any doubts or questions arise regarding a physical equipment installation.
Nlekọta na mmezi
Ịdọ aka ná ntị!: Advanced technology, e.g., the use of modern materials and powerful electronics, requires specially adapted maintenance and repair methods. To avoid the danger of subsequent damage to the apparatus, injuries to persons and/or the creation of additional safety hazards, all maintenance or repair work on the apparatus should be performed only by a QSC authorised service station or an authorised QSC International Distributor. QSC is not responsible for any injury, harm or related damages arising from any failure of the customer, owner or user of the apparatus to facilitate those repairs.
Ịdọ aka ná ntị! The Server Core X10 is designed for indoor installation only.
Ịdọ aka ná ntị batrị LITHIUM
Ịdọ aka ná ntị!: Akụrụngwa a nwere batrị lithium na-anaghị ebugharị. LITHIUM BỤ kemikal mara na steeti CALIFORNIA na-ebute ọrịa kansa ma ọ bụ ntụpọ ọmụmụ. Batrị LITHUM NA-AKWỤKWỌ NA-AKWỤKWỌ N'ỤLỌ N'ỤWA A nwere ike ịgbawa ma ọ bụrụ na ọ bụ ọkụ ma ọ bụ oke ọkụ. AKWỤKWỌ KWESỊRỊ OGE BATI. Agbalịla ịgbanye batrị lithium nke anaghị ebugharị. Onwere ihe ize ndụ nke mgbawa ma ọ bụrụ na ejiri ụdị ezighi ezi dochie batrị ahụ.
Nkọwapụta gburugburu ebe obibi
- Usoro ndụ ngwaahịa a tụrụ anya ya: afọ 10
- Oke nchekwa nchekwa: -40°C ruo +85°C (-40°F ruo 185°F)
- Storage Humidity Range: 10% to 95% RH @ 40°C, non-condensing
- Oke okpomọkụ na-arụ ọrụ: 0°C ruo 40°C (32°F ruo 104°F)
- Operating Humidity Range: 10% to 95% RH @ 40°C, non-condensing
Nkwekọrịta gburugburu
Q-SYS complies with all applicable environmental regulations. This includes (but is not limited to) global environmental laws, such as the EU WEEE Directive (2012/19/EU), China RoHS, Korean RoHS, U.S. Federal and State Environmental Laws and various resource recycling promotion laws around the world. For more information, visit: qsys.com/about-us/green-statement.
Nkwupụta FCC
The Q-SYS Server Core X10 has been tested and found to comply with the limits for a Class A digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used according to the instruction manual, it may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference; in which case, the user will be required to correct the interference at his own expense.
Nkwupụta RoHS
The QSC Q-SYS Server Core X10 complies with the European RoHS Directive.
The QSC Q-SYS Server Core X10 complies with “China RoHS” directives. The following table is provided for product use in China and its territories.
EFUP assessment is 10 years. This period is based on the shortest component or subassembly EFUP declaration used in the Server Core X10 product designs.
QSC Q-SYS Server Core X10
This table is prepared following the requirements of SJ/T 11364.
O: Na-egosi na ntinye nke ihe ahụ na ihe niile jikọrọ ọnụ nke akụkụ ahụ dị n'okpuru ebe dị mkpa akọwapụtara na GB/T 26572.
X: Indicates that the concentration of the substance in at least one of the homogeneous materials of the part is above the relevant threshold, as specified in GB/T 26572. (Replacement and reduction of content cannot be achieved currently because of technical or economic reasons.)
Kedu ihe dị na Igbe ahụ?
- Q-SYS Server Core X10
- Accessory Kit (Ear Handles and rack-mounting rail kit hardware)
- Power cable, appropriate tothe region
- Warranty statement, TD-000453-01
- Safety Information & Regulatory Statements doc, TD-001718-01
Okwu mmalite
The Q-SYS Server Core X10 represents the next generation of Q-SYS processing, pairing the Q-SYS OS with off-the-shelf, enterprise-grade IT server hardware to deliver a flexible and scalable audio, video, and control solution for a vast range of applications. Server Core X10 is a fully networked, programmable AV&C processor that provides centralised processing for multiple spaces or zones while distributing network I/O where it’s most convenient.
IHE: The Q-SYS Server Core X10 processor requires Q-SYS Designer Software (QDS) for configuration and operation. QDS version compatibility information can be found here. Information about the QDS components related to the Server Core X10, including their properties and controls, can be found in Q-SYS Help at enyemaka.qsys.com. Or, simply drag a Server Core X10 component from the Inventory into the Schematic and press F1.
Njikọ na oku oku
Ogwe ihu
- Power light: lights up blue when the unit is powered on.
- Front-panel display: displays pertinent information about the core, such as its network configuration, the system it is running, active faults, etc.
- Navigation buttons (up, down, left, right): allow the user to navigate through the menus on the front panel display:
- a. Both the up and right buttons advance to the next menu item.
- b. Both the down and left buttons go back to the previous menu item.
- ID/Select button: Press the centre button to put the Core into ID mode for identification within Q-SYS Designer Software. Press again to turn off ID mode.
Azụ azụ
- HDMI port: not supported.
- USB A and USB C ports: not supported.
- Serial communications RS232 (male DB-9): for connecting to serial devices.
- Q-SYS LAN ports (RJ45): from left to right; top row is LAN A and LAN B, bottom row is LAN C and LAN D.
- Power supply unit (PSU).
Nwụnye
The following procedures explain how to install the ear handles and slide rail accessories onto the system chassis and into the rack.
Ear Handle Installation
To install the pair of mounting ears and handles in the accessory box, insert the provided screws into the front-right and front-left mounting ears, and fasten them.
Slide Rail Preparation
- Release the inner rail from the outer rail.
- a. Extend the inner rail until it stops.
- b. Press the release lever on the inner rail to remove it.
- Attach the inner rail to the chassis.
- Press the released inner rail against the chassis of the server or AV system. Then lift the clip (A) and slide the inner rail toward the chassis rear (B).
Rack Rail Installation
Racks nkesa
- Lift the lever on the outer rail. Aim the rack mount pin at the front rack post and push forward to lock.
- Lift the lever again. Align the rear rack mount pin to the rack post and pull back to lock the rear of the outer rail.
AV Racks
- Align the front of the outer rail with the AV rack’s round mounting holes. Insert and tighten #10-32 rack screws (two per side).
- Repeat steps for the rear.
Nwụnye sistemụ
Mount the system onto the rack:
- Ensure the ball-bearing retainer in the outer rail is locked in the forward position.
- Pull the middle rail out of the outer rail until it locks.
- Align the system’s inner rails (attached in earlier steps) with the middle rail and push the system fully into the rack until it locks.
Outer Rail Removal
- To remove the outer rail from the rack, press the release latch on the side of the rail.
- Slide the rail out from the mounting rack.
Ebe Ọmụma
Chọta azịza nke ajụjụ ndị a na-ajụkarị, ozi nchọpụta nsogbu, ndụmọdụ na ndetu ngwa. Njikọ ịkwado amụma na akụrụngwa, gụnyere enyemaka Q-SYS, ngwanrọ na ngwa ngwa, akwụkwọ ngwaahịa, na vidiyo ọzụzụ. Mepụta ikpe nkwado.
nkwado.qsys.com
Nkwado ndị ahịa
Rụtụ aka na ibe kọntaktị anyị na Q-SYS websaịtị maka nkwado nka na ụzụ na nlekọta ndị ahịa, gụnyere nọmba ekwentị ha na awa ọrụ.
qsys.com/contact-us/
Akwụkwọ ikike
Maka nnomi nke QSC Limited Warranty, gaa na:
qsys.com/support/warranty-statement/
2025 QSC, LLC Ikike niile echekwabara. QSC, akara QSC, Q-SYS, na akara Q-SYS bụ ụghalaahịa edenyere n'akwụkwọ ikikere nke QSC, LLC n'ime US Patent and Trademark Office na obodo ndị ọzọ. Enwere ike itinye akwụkwọ ikike maka ma ọ bụ na-echere. Ighalaahịa ndị ọzọ niile bụ ihe onwunwe nke ndị nwe ha. qsys.com/patents.
qsys.com/trademarks
Akwụkwọ / akụrụngwa
 |
Q-SYS X10 Server Core Processor [pdf] Akwụkwọ ntuziaka onye ọrụ WA-001009-01, WA-001009-01-A, X10 Server Core Processor, X10, Server Core Processor, Core Processor, Processor |