Q-SYS X10 سرور ڪور پروسيسر
اصطلاحن ۽ نشانين جي وضاحت
- اصطلاح "خبردار!" ذاتي حفاظت جي حوالي سان هدايتون ڏيکاري ٿو. جيڪڏهن هدايتن تي عمل نه ڪيو وڃي، نتيجو ٿي سگهي ٿو جسماني زخم يا موت.
- اصطلاح "احتياط!" جسماني سامان کي ممڪن نقصان جي حوالي سان هدايتون ڏيکاري ٿو. جيڪڏهن انهن هدايتن تي عمل نه ڪيو وڃي، اهو نتيجو ٿي سگهي ٿو ته سامان کي نقصان پهچائي سگھي ٿو جيڪو وارنٽي جي تحت ڍڪيل نه هجي.
- اصطلاح "اهم!" هدايتون يا معلومات ڏيکاري ٿو جيڪي عمل جي ڪامياب مڪمل ٿيڻ لاءِ اهم آهن.
- اصطلاح "نوٽ" اضافي مفيد معلومات کي ظاهر ڪرڻ لاء استعمال ڪيو ويندو آهي.
ٽڪنڊي ۾ تير جي نشان سان روشني ڪندڙ چمڪ استعمال ڪندڙ کي خبردار ڪري ٿي ته غير محفوظ ٿيل خطرناڪ حجم جي موجودگيtage پراڊڪٽ جي لفافي جي اندر جيڪا انسانن لاءِ برقي جھٽڪو جو خطرو بڻجي سگهي ٿي.
The exclamation point within a triangle alerts the user to the presence of important safety, operating, and Maintenance instructions in this manual.
اھم حفاظتي ھدايتون
- پڙهو، پيروي ڪريو، ۽ انهن هدايتن کي رکو.
- سڀني ڊيڄاريندڙن تي ڌيان ڏيو.
- پاڻي جي ويجهو هي اوزار استعمال نه ڪريو.
- صرف سڪل ڪپڙي سان صاف ڪريو.
- Do not block any ventilation opening. Install according to the manufacturer’s instructions.
- ڪنهن به گرمي جي ذريعن جي ويجهو نصب نه ڪريو جهڙوڪ ريڊيٽرز، گرمي رجسٽر، اسٽو، يا ٻيو سامان (بشمول ampلائفائرز) جيڪي گرمي پيدا ڪن ٿا.
- صرف ٺاھيندڙ طرفان بيان ڪيل منسلڪ / لوازمات استعمال ڪريو.
- سڀني خدمتن جو حوالو ڏيو قابل خدمت اهلڪارن ڏانهن.
- سڀني قابل اطلاق مقامي ڪوڊس تي عمل ڪريو.
- Consult a licensed, professional engineer when any doubts or questions arise regarding a physical equipment installation.
سار سنڀال ۽ مرمت
خبردار!: Advanced technology, e.g., the use of modern materials and powerful electronics, requires specially adapted maintenance and repair methods. To avoid the danger of subsequent damage to the apparatus, injuries to persons and/or the creation of additional safety hazards, all maintenance or repair work on the apparatus should be performed only by a QSC authorised service station or an authorised QSC International Distributor. QSC is not responsible for any injury, harm or related damages arising from any failure of the customer, owner or user of the apparatus to facilitate those repairs.
خبردار! The Server Core X10 is designed for indoor installation only.
ليٿيم بيٽري جي خبرداري
خبردار!: هن سامان ۾ هڪ غير ريچارج ٿيندڙ ليٿيم بيٽري شامل آهي. ليٿيم هڪ ڪيميڪل آهي جيڪو ڪيليفورنيا رياست ۾ ڪينسر يا پيدائش جي خرابين جو سبب بڻجندو آهي. هن سامان ۾ موجود غير ريچارج ٿيندڙ ليٿيم بيٽري باهه يا انتهائي گرمي جي سامهون اچڻ تي ڦاٽي سگهي ٿي. بيٽري کي شارٽ نه ڪريو. غير ريچارج ٿيندڙ ليٿيم بيٽري کي ريچارج ڪرڻ جي ڪوشش نه ڪريو. جيڪڏهن بيٽري کي غلط قسم سان تبديل ڪيو وڃي ته ڌماڪي جو خطرو آهي.
ماحولياتي وضاحتون
- متوقع پيداوار جي زندگي چڪر: 10 سال
- اسٽوريج جي درجه حرارت جي حد: -40 ° C کان + 85 ° C (-40 ° F کان 185 ° F)
- Storage Humidity Range: 10% to 95% RH @ 40°C, non-condensing
- آپريٽنگ جي درجه حرارت جي حد: 0 ° C کان 40 ° C (32 ° F کان 104 ° F)
- Operating Humidity Range: 10% to 95% RH @ 40°C, non-condensing
ماحولياتي تعميل
Q-SYS complies with all applicable environmental regulations. This includes (but is not limited to) global environmental laws, such as the EU WEEE Directive (2012/19/EU), China RoHS, Korean RoHS, U.S. Federal and State Environmental Laws and various resource recycling promotion laws around the world. For more information, visit: qsys.com/about-us/green-statement.
FCC بيان
The Q-SYS Server Core X10 has been tested and found to comply with the limits for a Class A digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used according to the instruction manual, it may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference; in which case, the user will be required to correct the interference at his own expense.
آر او ايڇ بيان
The QSC Q-SYS Server Core X10 complies with the European RoHS Directive.
The QSC Q-SYS Server Core X10 complies with “China RoHS” directives. The following table is provided for product use in China and its territories.
EFUP جي تشخيص 10 سال آهي. هي عرصو سرور ڪور X10 پراڊڪٽ ڊيزائن ۾ استعمال ٿيندڙ مختصر ترين جزو يا ذيلي اسيمبلي EFUP اعلان تي ٻڌل آهي.
QSC Q-SYS سرور ڪور X10
This table is prepared following the requirements of SJ/T 11364.
O: ظاهر ڪري ٿو ته حصو جي سڀني هڪجهڙائي واري مواد ۾ مادي جو ڪنسنٽريشن GB/T 26572 ۾ بيان ڪيل لاڳاپيل حد کان هيٺ آهي.
X: Indicates that the concentration of the substance in at least one of the homogeneous materials of the part is above the relevant threshold, as specified in GB/T 26572. (Replacement and reduction of content cannot be achieved currently because of technical or economic reasons.)
دٻي ۾ ڇا آهي؟
- Q-SYS Server Core X10
- Accessory Kit (Ear Handles and rack-mounting rail kit hardware)
- Power cable, appropriate tothe region
- Warranty statement, TD-000453-01
- Safety Information & Regulatory Statements doc, TD-001718-01
تعارف
The Q-SYS Server Core X10 represents the next generation of Q-SYS processing, pairing the Q-SYS OS with off-the-shelf, enterprise-grade IT server hardware to deliver a flexible and scalable audio, video, and control solution for a vast range of applications. Server Core X10 is a fully networked, programmable AV&C processor that provides centralised processing for multiple spaces or zones while distributing network I/O where it’s most convenient.
نوٽ: The Q-SYS Server Core X10 processor requires Q-SYS Designer Software (QDS) for configuration and operation. QDS version compatibility information can be found here. Information about the QDS components related to the Server Core X10, including their properties and controls, can be found in Q-SYS Help at help.qsys.com. Or, simply drag a Server Core X10 component from the Inventory into the Schematic and press F1.
ڪنيڪشن ۽ ڪال آئوٽ
سامهون پينل
- Power light: lights up blue when the unit is powered on.
- Front-panel display: displays pertinent information about the core, such as its network configuration, the system it is running, active faults, etc.
- Navigation buttons (up, down, left, right): allow the user to navigate through the menus on the front panel display:
- a. Both the up and right buttons advance to the next menu item.
- b. Both the down and left buttons go back to the previous menu item.
- ID/Select button: Press the centre button to put the Core into ID mode for identification within Q-SYS Designer Software. Press again to turn off ID mode.
پوئتي پين
- HDMI port: not supported.
- USB A and USB C ports: not supported.
- Serial communications RS232 (male DB-9): for connecting to serial devices.
- Q-SYS LAN ports (RJ45): from left to right; top row is LAN A and LAN B, bottom row is LAN C and LAN D.
- Power supply unit (PSU).
تنصيب
هيٺ ڏنل طريقا بيان ڪن ٿا ته ڪن جي هينڊلز ۽ سلائڊ ريل لوازمات کي سسٽم چيسس ۽ ريڪ ۾ ڪيئن نصب ڪجي.
ڪن جي هينڊل جي انسٽاليشن
To install the pair of mounting ears and handles in the accessory box, insert the provided screws into the front-right and front-left mounting ears, and fasten them.
سلائيڊ ريل جي تياري
- Release the inner rail from the outer rail.
- a. Extend the inner rail until it stops.
- b. Press the release lever on the inner rail to remove it.
- Attach the inner rail to the chassis.
- Press the released inner rail against the chassis of the server or AV system. Then lift the clip (A) and slide the inner rail toward the chassis rear (B).
ريڪ ريل جي انسٽاليشن
سرور ريڪس
- Lift the lever on the outer rail. Aim the rack mount pin at the front rack post and push forward to lock.
- Lift the lever again. Align the rear rack mount pin to the rack post and pull back to lock the rear of the outer rail.
اي وي ريڪ
- Align the front of the outer rail with the AV rack’s round mounting holes. Insert and tighten #10-32 rack screws (two per side).
- Repeat steps for the rear.
سسٽم جي انسٽاليشن
Mount the system onto the rack:
- Ensure the ball-bearing retainer in the outer rail is locked in the forward position.
- Pull the middle rail out of the outer rail until it locks.
- Align the system’s inner rails (attached in earlier steps) with the middle rail and push the system fully into the rack until it locks.
ٻاهرين ريل کي هٽائڻ
- To remove the outer rail from the rack, press the release latch on the side of the rail.
- Slide the rail out from the mounting rack.
علم جو بنياد
عام سوالن جا جواب ڳولھيو، مسئلا حل ڪرڻ واري ڄاڻ، ٽوٽڪا، ۽ ايپليڪيشن نوٽس. پاليسين ۽ وسيلن کي سپورٽ ڪرڻ لاءِ لنڪ، بشمول Q-SYS مدد، سافٽ ويئر ۽ فرم ویئر، پراڊڪٽ دستاويز، ۽ تربيتي وڊيوز. سپورٽ ڪيس ٺاهيو.
support.qsys.com
ڪسٽمر سپورٽ
ڏسو اسان سان رابطو ڪريو صفحو Q-SYS تي webٽيڪنيڪل سپورٽ ۽ ڪسٽمر ڪيئر لاءِ سائيٽ، بشمول سندن فون نمبر ۽ آپريشن جا ڪلاڪ.
qsys.com/contact-us/
وارنٽي
QSC محدود وارنٽي جي ڪاپي لاءِ، وڃو:
qsys.com/support/warranty-statement/
2025 QSC, LLC سڀ حق محفوظ آهن. QSC، QSC لوگو، Q-SYS، ۽ Q-SYS لوگو آمريڪي پيٽنٽ ۽ ٽريڊ مارڪ آفيس ۽ ٻين ملڪن ۾ QSC, LLC جا رجسٽرڊ ٽريڊ مارڪ آهن. پيٽنٽ لاءِ درخواست ڏئي سگهجي ٿي يا التوا ۾ رکي سگهجي ٿي. ٻيا سڀئي ٽريڊ مارڪ انهن جي لاڳاپيل مالڪن جي ملڪيت آهن. qsys.com/patents.
qsys.com/trademarks
دستاويز / وسيلا
 |
Q-SYS X10 سرور ڪور پروسيسر [pdf] استعمال ڪندڙ دستياب WA-001009-01، WA-001009-01-A، X10 سرور ڪور پروسيسر، X10، سرور ڪور پروسيسر، ڪور پروسيسر، پروسيسر |