RCbro®
SPARROW V3 Pro
Buka ea v1.2
SPARROW V3 Pro OSD Flight Controller Gyro Stabilization Return
LefeiRC www.lefeirc.com/
Boithorollo le Litemoso
Ka kopo, sebelisa sehlahisoa sena ka har'a sebaka se lumelletsoeng ke melao le lipehelo tsa lehae. LE FEI ha e nke boikarabelo ba molao bo bakoang ke tšebeliso e seng molaong ea sehlahisoa sena.
Sehlahisoa sena ke mohlala oa sefofane se laoloang hole. Ka kopo, latela ka tieo melaoana ea ts'ebetso ea polokeho ea lihlahisoa tsa lifofane tsa mohlala. LE FEI ha e nke ts'ebetso efe kapa efe, polokeho kapa melato ea molao e bakoang ke ts'ebetso e fosahetseng le taolo ea ts'ebeliso.
Mefuta ea lifofane ha se lintho tsa ho bapala. Ka kopo fofa tlas'a tataiso ea basebetsi ba litsebi 'me u li kenye le ho li sebelisa ho latela bukana ena ea lihlahisoa. LE FEI ha e ikarabelle bakeng sa likotsi tsa mohlala oa sefofane tse bakoang ke ho kenya, ho hlophisoa, kapa ts'ebetso e fosahetseng ea basebelisi.
Hang ha u sebelisa sehlahisoa sena, ho nkoa hore u utloisisa, u lemohile le ho amohela lipehelo le litaba tse ka holimo. Ka kopo, ikarabella bakeng sa boitšoaro ba hau, polokeho le litlamorao tsohle ha u e sebelisa.
Paramethara
➢ FC
Boholo: 33 * 25 * 13mm
Boima: 16.5g
➢ MATLA
HO KENYA: 2-6S (MAX 80A)
SETSO(PMU): 5V/4A 9.5V/2A
FC: 5V(PMU)
VTX/CAM: 9.5V(PMU)
SERVO: onboard 5V(PMU) kapa BEC ea kantle
➢ RC RECEIVER
Protocol: PPM SBUS IBUS ELRS/CRSF
Telem: MAVLINK, CRSF
Sehokedi
➢ BOEKO
| RC | PPM/SBUS/IBUS/CRSF |
| T1 | MAVLINK |
| T2 | CRSF |
| TX | GPS-RX |
| RX | GPS-TX |
| S1 | LEFOKO |
| S2 | ELE |
| S3 | THR |
| S4-S8 | AUX Channel(S4 defaults to RUD) |
| CAM1-2 | Khamera e habeli |
| VTX | VTX |
| 9V5 | Phepelo ea motlakase ea VTX/CAM |
| BATHO | Betri |
| ESC | ESC |
| VX | Matla a servo |
| G/GND | GND |
* Ho khothalletsoa ho tlosa propeller nakong ea ho kenya le ho lokisa liphoso, ela hloko polokeho!
➢ Matla a ho sebeletsa
FC 5V BEC(PMU): Sebelisa solder ho hokahanya lithakhisa tse peli tse bontšitsoeng setšoantšong, le ho khaola BEC e 'ngoe ea servo (e kang BEC e hahiloeng ka har'a ESC).
BEC e kantle: Haeba u sa hokahane le lithakhisa tse peli tse bontšitsoeng setšoantšong, BEC ea kantle e sebelisoa ka mokhoa o ikhethileng. BEC e ka hokahanngoa le mocha ofe kapa ofe har'a S1-S8.
Ho khothaletsoa ho sebelisa capacitor ea 3300uF/16V e fanoeng ho fumana matla a sebetsang a tsitsitseng le a sireletsehileng haholoanyane.tage bakeng sa PMU. Capacitor e ka hokeloa ho e 'ngoe ea li-sockets tsa mahala kapa tse tsoang ho FC.
➢ Leqhubu le leholo
Ha hona joale e le khōlō, ho kgothaletswa ho thiba lesela le pepenene nakong ea soldering, joalokaha ho bontšitsoe setšoantšong se ka tlase!
Ha motlakase o le moholo haholo mme matla a phepelo ea betri a sa lekana, sena se ka etsa hore OSD e reketle. Ka nako ena, ho kgothaletswa ho hokahanya capacitor e kholo ea ESR ka ho bapisa le FC, joalo ka 470uf / 30V (e kenyellelitsoeng lisebelisoa); Ela hloko lipalo tse ntle le tse mpe tsa capacitor ha u e sebelisa. Tsela e tloaelehileng ea ho ahlola ke hore phini e telele ke palo e nepahetseng 'me pinana e khutšoanyane ke palo e fosahetseng, kapa u ka ahlola ka palo e nepahetseng (+) kapa palo e fosahetseng (-) e tšoailoeng khetla ea capacitor,
Ho tse ling tsa ESCs, betri voltage le 5V-BEC tlhahiso ea voltagE feto-fetoha haholo tlas'a maemo a phahameng a hona joale, e leng se tla baka tšitiso e itseng ho FC, joalo ka OSD flickering kapa esita le sensor e amehang, e bakang phoso ea maikutlo. ESR e tlase haholo
capacitor e hokahane ka tsela e ts'oanang le sephetho sa tlhahiso ea ESC (ha ESC e atametse, phello e betere). Haeba sebaka se lumela, capacitor e ka hokeloa ka ho bapa ho BAT le ESC terminal ea FC.
➢ Taolo ea remoutu le moamoheli
◐ PPM SBUS IBUS ELRS/CRSF
Hokela feela lets'oao le kanaleng la RC, FC e tla e lemoha ka bo eona; tatelano ea kamehla ea kanale ke AETR, e ka fetoloang ho TAER; e ts'ehetsa ho feto-fetoha ha li-channel tse peli 'me e arotsoe ka likanale tsa MAIN-SUB.O ka seta sefofane sa 5 mekhoa ka nako e le 'ngoe. Mokhoa o ka sehloohong oa kanale o lula o le CH5, pele o sebelisa sub mode, o hloka feela ho seta o mong oa mekhoa ea mantlha ho .
◐ Lekanya RC
Kenya menu ea OSD - , tobetsa 'me u tšoare thupa ka metsotsoana e seng mekae (ROLL ho ea ka ho le letona) ho fihlela <CFM?> e hlaha. Letsetsa mocha o moholo ka potlako makhetlo a 'maloa ho qeta ho lekanya. Haeba e hlahiswa ka mora ho lekanya, e bontsha hore tlhatlhobo e hlolehile. Ela hloko hore na ho na le phoso ho data ea kanale e hlahang ho OSD. Haeba tekanyo e hlōleha 'me RC e ke ke ea lekanngoa hape, u ka fetola moqolo le thupa ho MAX, ebe u qala hape FC, e tla kena ka bo eona. .Ka mor'a hore calibration e phethoe, tobetsa 'me u tšoare thupa ka metsotsoana e seng mekae (ROLL ho le letšehali) ho tsoa leqepheng la calibration.
◐ RSSI
Sekanale sa RSSI se ka khethoa, 'me boholo ba boleng ba RSSI bo tšoana le ba likanale tse ling. Ha o sebelisa ELRS, haeba RC e sa khone ho beha mocha o ikemetseng oa RSSI, o ka o beha ho menu ea OSD ho , e tla bontša LQI (Link Quality Indication).
◐ CRSF Telemetry
Ha mofuta oa lets'oao e le ELRS, telemetry ea CRSF e buloa ka bo eona, 'me mosebelisi o hloka feela ho hokahanya RX ea moamoheli boema-kepeng ba T2 ba FC; lintlha tsa telemetry li kenyelletsa mokhoa oa sefofane, latitude le longitude, angle ea maikutlo, lebelo, bophahamo, sehlooho, palo ea lisathelaete le lintlha tse ling.
◐ Malebela
Ha u sebelisa RC, ha ho hlokahale hore u behe mokhoa oa ho kopanya, mosebeletsi a ka khetha mohlala o loketseng ho menu ea OSD; ha u kena ho menu ea OSD, u se ke ua fokotsa leeto la lithupa.
➢ Mokhoa oa ho kenya
| 0D | Motsu o supa hloohong |
| 90D | Motsu o supa ka ho le letona |
| 180D | Motsu o supa ka morao |
| 270D | Motsu o supa ka ho le letšehali |
| R90D | Motsu o supa hloohong, beha tlase ho FC ka lehlakoreng le letona la sefofane |
| L90D | Motsu o supa hloohong, beha tlase ho FC ka lehlakoreng le letšehali la sefofane |
| KHUTLANG | Motsu o supa hlooho, 'me tlase ho FC e supa holimo |
➢ KHOPO EA LITŠEBELETSO
| T-MOHATLA | V-MOHATLA | LEPHAKA | |
| S1 | AIL1/AIL2 | AIL1/AIL2 | EA-1-TL |
| S2 | ELE | RUD1 | EA-2-TL |
| S3 | ESC | ESC | ESC |
| S4 | RUDI | RUD2 | NO KHOPO |
*S4 e hloleha ho tshebetso ya YAW(RUD), mme e ka boela ya sebediswa bakeng sa ditshebetso tse ding.
*Ha o sebelisa li-motor tse peli, khetha feela mocha ofe kapa ofe ho tloha ho S4-S8 ho o sebelisa hape e le ts'ebetso ea THR, ebe o hokela lithapo tse peli tsa ESC ho S3 le mocha o khethiloeng ka ho latellana. Haeba o hloka ho sebelisa ts'ebetso ea phapang ea throttle, sheba ho .
OSD & LED
➢ SEHLOOHO
| 1 | Boemo ba Sefofane | 12 | Throttle |
| 2 | Nako | 13 | Ho potlakisa bophelo bo botle |
| 3 | Mocheso | 14 | GroundSpeed |
| 4 | Volatge | 15 | Horizon Line |
| 5 | Sele Voltage | 16 | Bophahamo |
| 6 | Hona joale | 17 | Sekhahla sa ho hloa |
| 7 | Sebaka | 18 | Leeto |
| 8 | Return Home Angle | 19 | Tšebeliso ea Matla |
| 9 | Tsela ea Lifofane | 20 | Latitude le Longitude |
| 10 | Sathelaete | 21 | Lakatsehang Lekunutu la Boikutlo |
| 11 | RSSI | 22 | Lekunutu la Sebele |
* Letšoao la GPS le tla tsoela pele ho bonesa ha GPS e sa hokahanngoa kapa GPS e sa lokisoa.
*'>' e bolela ho thinyetsa ka ho le letona, '<' e bolela ho thinyetsa ka ho le letšehali, 'me nomoro ka mor'a eona e bontša sebaka se khethehileng se hlokahalang.
*Haeba lets'oao la RC le benya, ho bolela hore RC ha e sireletsehe kapa moamoheli o khaotsoe. Haeba GPS e se e tsitsitse ka nako ena, e tla fetohela ho RTH ka bo eona.
➢ LAOLA OSD MENU
| Kenya Menu | Letsetsa mocha o moholo ka potlako |
| Etsoa | LETS'ELISI |
| Kena | LESELI TS'OANE |
| PHAHAMA/TLASE | ELE PHAHAMA |
*Ha kena kapa ho tsoa ho , ROLA ka ho le letšehali kapa ka ho le letona e hloka ho ts'oaroa metsotsoana e seng mekae.
➢ LITŠOANTŠISO
| RC | RC CALI | Lekola RC |
| KEKELETSO MOHATA | AETR kapa TAER | |
| RSSI | RSSI | |
| KANANELO SEHOLO | CH5/CH6 | |
| TS'ELISO KHALE | CH5/CH6/CH7/CH8/CH9/CH10 | |
| MOKHOA OA MOTHO1 | STAB/MAN/ACRO/ALT/RTH/FENCE/HOVER/ALT*/SUB | |
| MOKHOA OA MOTHO2 | ||
| MOKHOA OA MOTHO3 | ||
| MOKHOA OA THUTO1 |
STAB/MAN/ACRO/ALT/RTH/FENCE/HOVER/ALT* |
|
| MOKHOA OA THUTO2 | ||
| MOKHOA OA THUTO3 | ||
| NAKO RTH | Numella RTH kamora nako (ntle le RTH le MAN) | |
| NAKO SEC | Beha nako ea nako (nako ea lithupa e lula e sa sisinyehe) | |
| KHAMANE KHAMANE | Kanale ea ho fetola lik'hamera tse peli | |
| MOTHEO | MOTSAMAI | T-TAIL, V-TAIL, LEPHAKA |
| KEKETSO | InstallDirection | |
| TS'OANELO MOHOLO | Beha phaello, phaello ea YAW e sebetsa feela ho ACRO. | |
| PHAHAMO PHAHAMA | ||
| JOA GAIIN | ||
| LEBAKA CALI | LEBAKA CALI | |
| TLHOKOMELOTAGE CALI | Seta voltage/current offset | |
| NKHOANE CALI | ||
| TS'OPE LEBELO | Lebelo la sefofane ho RTH/HOVER/ALT* | |
| RTH ALT | Haeba sebaka se feta makhetlo a 3 ho potoloha radius, min flying altitude ke . Haeba e phahame ho feta bophahamo bona, e tla theoha butle; ka mor'a ho atamela HOME, bophahamo ba fofa ke | |
| POLOKO ALT | ||
| LEKHOLO RADIUSI | Haeba sebaka se feta radius ena, RTH e tla qala | |
| RTH RADIUSE | Sebaka sa selikalikoe | |
| MOTHEO THR | MIN THR ho RTH/HOVER/ALT* | |
| FUMANO ACRO | Ho fumana botsitso ho ACRO | |
| TLHOKOMELO VELELE | Ka lebelo le lebelo, e nyane phaello e hlokahalang, le
e kholoanyane e lokela ho ba. |
|
| THR-PHAPANG | Karolelano ea phapang ea Throttle e laoloang ke YAW. | |
| MOEKETSI | Karolelano ea taolo ea lithupa ka mokhoa oa ACRO. | |
| MAX ROLALA | MAX sebaka sa sefofane | |
| MAX PIKETSA | ||
| BAT-S-NUM | Palo ea lisele tsa betri | |
| SERVO
|
S1 DIR | Tataiso ea servo |
| S2 DIR | ||
| S4 DIR | ||
| S5 DIR | ||
| S6 DIR | ||
| S7 DIR | ||
| S8 DIR | ||
| S4 MOSEBETSI | Beha ts'ebetso ea S4-S8 multiplex, haeba e behiloe ho throttle, e tla ba le mosebetsi o fapaneng | |
| S5 MOSEBETSI | ||
| S6 MOSEBETSI | ||
| S7 MOSEBETSI | ||
| S8 MOSEBETSI | ||
| S1 MID | Beha boemo ba ho se nke lehlakore ba servo | |
| S2 MID | ||
| S4 MID | ||
| S5 MID | ||
| S6 MID | ||
| S7 MID | ||
| S8 MID | ||
| OSD | MOKHOA | Ha ntho ya OSD e setetswe ho , ka potlako letsetsa mocha o moholo ho kenya leqephe la phetoho ea boemo ba OSD, 'me u lokise boemo ba OSD ka moqolo le lithupa tsa molumo. Ka mor'a hore tokiso e phethe, letsetsa kapele mocha o moholo o ka tsoa |
| NAKO | ||
| TLHOKOMELOTAGE | ||
| KHABANE | ||
| TS'ELISO | ||
| RTH TŠOANE | ||
| SATELLITE | ||
| RSSI | ||
| THR | ||
| ALT | ||
| HLOKA SEKOLO | ||
| TS'ELISITSOE | ||
| LEETO | ||
| MAH | ||
| LLA | ||
| BOIKUTLO | ||
| TS'ELISO | ||
| FOTSENG TŠOANE | ||
| ALT SEKAE | ||
| LEBELO LEBAKA | ||
| SELE TS'OANE | ||
| MOCHESO MOCHESO | ||
| ACCEL BOPHELO | ||
| LERATOA-ATT | ||
| LERATOA-ALT | ||
| OSD | Lumella pontšo ka kakaretso ea OSD | |
| HOS | Beha OSD offset | |
| VOS | ||
| TS'ELISO | TELEMELI | MAVLINK ea botsoa |
| GPS RESET | GPS RESET | |
| GPS CFG | Hore na o lokela ho lokisa GPS kamora ho bulela. Ho se hlophise ho ka fokotsa nako ea ho qala | |
| FC RESETSA | Khutlisa litlhophiso tsa kamehla | |
| TSIETSO TS'OANE | Kakaretso ea lintlha tsa sefofane | |
| TS'OANELO RETS'ELISITSOE | Seta bocha kakaretso ea data ea sefofane | |
| FC DATA | Pontšo ea data ea sensor | |
| PUO | Sechaena kapa Senyesemane. |
* Ha u beha ts'ebetso ea servo, RC6-12 e bolela mocha oa RC 6-12th.
*< FENCE RADIUS> e sebetsa feela ka mokhoa oa terata, mekhoa e meng ha e na ts'ebetso ea terata.
* Ka mor'a ho fetola , o hloka ho qala hape FC.
➢ Kakaretso ea Sefofane
Kamora ho fihla, OSD e tla bonts'a kakaretso ea lintlha tsa sefofane.
Letsetsa ka potlako mocha o moholo ho tsoa.
➢ LED
| MONAHANA | Khanya e potlakileng | RTH/ALTHHOLD/FENCE/HOVER/ALT* |
| Khanya | MANUL/ACRO | |
| On | TSAMAEA | |
| KHIBIDUDU | Khanya | GPS NoFix |
| On | GPS e Tsitsitseng | |
| E tima | HA HO GPS |
➢ GPS
FC e ts'ehetsa protocol ea UBLOX, empa ha e tšehetse NMEA. Kamora ho bulela, FC e tla iketsetsa GPS. Haeba FC e sa kgone ho lemoha latitude le longitude ya GPS, o ka seta botjha GPS ka ntho ya ho seta .
Boemo ba Sefofane
➢ Joang
| MONNA | Sefofane se laoloa ka ho toba ke RC. |
| TSAMAEA | Laola angle ea sefofane, le boemo ba koloi ha ho se na RC. |
| ACRO | Mokhoa oa Gyro, notlela angle ea hajoale ha ho se na RC. |
| ALT | Tšoara bophahamo ba hajoale ha ho se na ELE. |
| LEKHOTA | Auto Retun Home ha e le ka ntle ho radius ea terata. |
| RTH | Auto Retun Lehae. |
| HLOKOMELA | Tsamaisa holim'a boemo ba hajoale. |
| ALT* | Notlela tsela ea sefofane 'me u boloke bophahamo. |
* FENCE/RTH/HOVER/ALT* e ka sebelisoa feela ha GPS e tsitsitse, ho seng joalo e tla fetoha ALT.
➢ Litlhophiso tsa Mokhoa oa SUB
Selaoli sa sefofane se tšehetsang tlhophiso ea kanale ea mode-sub mode, 'me ho ka seta mekhoa e fihlang ho e 5 ka nako e le 'ngoe. Mokhoa oa ho seta ke o latelang:
Mohato oa 1: Khetha mocha o nepahetseng oa mokhoa o ka sehloohong. Ho khothalletsoa ho sebelisa 3pos switch;
Mohato oa 2: Khetha boemo bofe kapa bofe ho mme o e behe ho ;
Mohato oa 3: Beha mokhoa oo u o hlokang;
Mohato oa 4: Fetola mocha o ka sehloohong oa sub mode ho bona hore na phetoho ea mode e nepahetse.
➢ Thuso ea ho tloha
ALT/FENCE/ALT*: Sutumelletsa throttle ho matla a lekaneng, kamora ho tloha (e lahle), sefofane se tla nyolohela ho 20m ka bohona. Mokhoa oa RTH: Sututsa throttle ho matla a lekaneng, sisinya sefofane kapa u mathe, ebe enjene e qala butle, ebe e tloha ka mor'a hore matla a lekane (e lahle), sefofane ka bohona se hloa le ho potoloha HOME.
➢ Taolo ea throttle
MAN / STAB / ACRO / ALT: Throttle e laoloa ka ho toba ke RC.
FENCE: Pele e qala RTH, throttle e laoloa ke RC, ka mor'a ho qalisa, e khethoa ke RTH.
RTH / HOVER: Throttle e laoloa ke RC nakong ea thuso ea ho tloha, ka mor'a ho kena sebakeng se pota-potileng, throttle e laoloa ke FC, ka boeona e fetola throttle ho ea ka lebelo la leeto leo u le behileng, u ka khona ho sutumelletsa throttle holimo (ka nģ'ane ho throttle e baloang ke FC) ho eketsa lebelo la ho tsamaea ka sekepe, empa ha o khone ho e theola.
ALT *: Throttle e laoloa ke RC nakong ea thuso ea ho tsamaea. Ka mor'a ho nyolohela ho 20m ka mokhoa o itekanetseng, throttle e laoloa ka boomo ho ea ka lebelo la sekepe. Ha throttle stick e le sebakeng se sa nke lehlakore, sefofane se bolokoa ka lebelo la sekepe. Sututsa throttle holimo ho eketsa lebelo la ho tsamaea ka sekepe, 'me u theole mohatelli ho fokotsa lebelo la ho tsamaea; Ha roll kapa pitch stick e ntse e tsamaea, throttle e laoloa ka letsoho.
➢ Phapang e matla
Boema-kepe bofe kapa bofe bo ho S4-S8 bo hlophiselitsoe ho sisinyeha, le ho ha se zero, joale o ka laola ho potoloha ha li-motor tse peli ka mocha oa YAW. Hoa hlokahala ho ela hloko hore na tataiso ea phetoho ea lebelo la li-motor tse peli e nepahetse, haeba e sa nepahale, fetola feela lithapo tse peli tsa ESC.
Tlhahlobo ea pele ho sefofane
➢ Taelo ea maikutlo
* Haeba tataiso ea maikutlo e sa nepahale, o ka fetola mocha ho OSD.
* Tataiso ea maikutlo e tlameha ho beoa pele, ebe tataiso ea taolo ea RC.
➢ Taelo ea taolo ea RC
* Haeba tataiso ea taolo e sa nepahale, o ka beha tlhahiso ea mocha ka morao ho RC.
* Kamora ho beha tataiso ea maikutlo, tataiso ea taolo e ka fetoloa feela ho RC.
➢ FailSafe
Ha RC e hlahisang PPM/IBUS/CRSF e feila, hangata ho na le linaha tse tharo tse ka hlophisoang.Ke: khaola (ha ho na tlhahiso), pos hold (tšoara sephetho motsotsong oa ho qetela pele u feila), tloaelo (mosebelisi. e beha sephetho ha failsafe), ehlile, RC e fapaneng e tla fapana.
Mokhoa oa ho itšeha: FC e ka tsebahatsa ka bohona e le e bolokehileng, 'me ea fetohela ho RTH;
Pos hold: mokhoa ona ha o khothalletsoe.
Mokhoa oa tloaelo: mosebelisi o beha data ea tlhahiso ea mocha ka mong ha RC e sa sireletseha, ho etsa bonnete ba hore tlhahiso ea mocha oa mokhoa (CH5 / CH6) e ka etsa hore FC e fetohe ho RTH ha RC e hlōleha. Ka hona, RTH e tlameha ho kenyelletsoa mekhoeng e meraro e behiloeng ho OSD.
PPM/IBUS/CRSF: ho khothaletsoa ho sebelisa mokhoa oa ho itšeha kapa mokhoa oa tloaelo.
SBUS: FC e ka tsebahatsa ka bohona e le e bolokehileng, ebe e fetohela ho RTH.
* Haeba u sebelisa mokhoa oa tloaelo, ho nolofatsa ts'ebetso, beha mocha oa mochini ho RC ho hlahisa boleng bo sa lekanyetsoang, ebe u hlokomela hore na FC e fetohela ho mofuta ofe ka mor'a ho feila, ebe o fetola mokhoa ho RTH ho OSD. Bakeng sa mohlalaample, ka mor'a hore RC e felise, mokhoa oa sefofane o fetoloa ka boits'oaro ho A, ebe o beha feela boemo ba A ho RTH ho OSD.
➢ Kemiso ea FC
- Kamora hore ts'ebetso ea FC e phetheloe, o hloka ho beha tataiso e nepahetseng ho menu ea OSD. Bakeng sa khetho ea tataiso ea ho kenya, sheba ho ;
- Ha u kenya, leka ho netefatsa hore tataiso e nepahetse. Bakeng sa mohlalaample, ha u supa hlooho ea sefofane, leka ho etsa bonnete ba hore FC e tšoana le tataiso ea hlooho ea sefofane, 'me ha ho na angle e hlakileng e kenyelletsoeng, ho seng joalo boikutlo ba sefofaneng bo tla ameha;
- Ha u kenya FC, leka ho e beha bohareng ba matla a khoheli 'me u qobe ho e beha haufi le motlakase ho qoba ho sisinyeha ho amang boikutlo ba sefofaneng.
➢ Boemo ba CALI
Mokhoa oa ho lekanya: Beha FC ka mokhoa o tšekaletseng le o sa sisinyeheng, ebe o qala ho lekanya, 'me u emele hore tlhahlobo e phethoe; ha u kenya FC ka har'a cabin bakeng sa ho lekanya, etsa bonnete ba hore FC e behiloe ka mokhoa o otlolohileng ka kamoreng, 'me ka nako e ts'oanang u behe sefofane se otlolohileng le se khutsitseng, ebe se qala ho lekanya.
Ha ho hlokahala teka-tekano: Ho khothalletsoa ho etsa tekanyo ea boemo ha u sebelisa FC ka lekhetlo la pele; ka mor'a ho fetola tataiso ea ho kenya, hoa hlokahala ho etsa tekanyo ea boemo hape; ho kgothaletswa ho etsa tekanyo ea boemo ka mor'a hore e se ke ea sebelisoa nako e telele.
Litlhokomelo tsa ho lekanya: Leka ho e boloka e tšekaletse ha u lekanya, ho lumella phapang e nyenyane haholo ea angle, e ke keng ea ama ho lekanya le ho fofa; o tlameha ho lula o khutsitse nakong ea ho lekanya 'me u se ke oa sisinya FC.
➢ Hlometseng
HA HO GPS: kamora hore FC e qale, e tla be e hlometse ka bo eona, 'me enjene e ka qalisoa ka mekhoa eohle ka nako ena.
Ka GPS: ka mor'a hore GPS e be teng, ntle le RTH le HOVER, enjene e ka qalisoa ka thato, empa pele e lokisoa, ke MAN feela ea ka qalang motlakase.
➢ Lekanya ESC
Mohato oa 1: Fetolela ho MAN mode, sutumelletsa mocha oa throttle ho ea holimo;
Mohato oa 2: Matlafatsa, OSD kapele (nako e telele ea ho leta ho feta moamoheli ea hokahaneng ka kotloloho).
Mohato oa 3: Ka mor'a ESC Beep, sutumelletsa mocha oa throttle ho zero.
* Haeba e le enjene e habeli, o ka lekanya li-ESC tse peli ka thoko!
LBH
P. Potso ea bohlokoa! ! !
K. Failsafe e bohlokoa haholo mme e tlameha ho hlophisoa! E kgothaletswa ho rekota DVR ha o sebelisa ka lekhetlo la pele!
P. Karabo ea bokaholimo ba lesira e nyane haholo ho STAB kapa mefuta e meng.
K. Tlas'a maemo a tloaelehileng a sefofane, o ka eketsa phaello ka mokhoa o nepahetseng 'me karabo ea holim'a taolo e tla eketseha.
P. RC ha e khone ho laola li-servos ho RTH le HOVER.
A. Ena ke ntho e tlwaelehileng. Ho RTH le HOVER, servo e laoloa ka bo eona ke molaoli oa sefofane!
P. Na ho na le tlhahiso ea throttle ho RTH le HOVER nakong ea sefofane?
A. Ho kgothaletswa ho fofa ka tsela e tlwaelehileng ho feta metsotswana e 6 pele o fetohela ho RTH kapa HOVER. Ka nako ena, throttle e laoloa ka bo eona ke molaoli oa sefofane. Haeba u fetohela ho mokhoa oa ho khutlisa hang ka mor'a hore u tsamaee ka mekhoa e meng, ho kgothaletswa ho sutumetsa throttle ho fihlela ntlha e nang le matla a lekaneng.
P. Bothata ba throttle ho RTH le HOVER.
A. Haeba sefofane se thusoa se sa etsoe, ho ke ke ha e-ba le karabelo ha u sututsa throttle; nakong ea ho tloha ho thusoa, ka mor'a hore sefofane se sisinyehe kapa maemo a ho matha a kopane, throttle e qala ho eketseha butle-butle ho ea pos ea throttle stick (ka hona, throttle e hloka ho sutumelloa ho matla a lekaneng qalong), ka mor'a ho qala ho hover, throttle e tla laoloa ka tsela e iketsang ho latela lebelo la ho tsamaea. Ka nako ena, mosebelisi a ka sutumelletsa throttle holimo, empa a ke ke a e theola. Ke hore, molaoli oa sefofane o lekanya boleng ba throttle bo kopanang le lebelo la hona joale la ho tsamaea, ebe o le bapisa le thupa ea sebele ea hona joale. Boleng ba 'nete ba tlhahiso ke bo boholo ho tse peli.
P. Mabapi le tlhophiso ya lebelo la sekepe.
K. Seke oa beha lebelo la leeto la sekepe tlase haholo, kaha le ka baka ho ema. Ho kgothaletswa ho bua ka lebelo la cruise le fanoeng ke moetsi pele o le beha. Haeba u utloa eka lebelo la leeto la sekepe le theohile haholo 'me sefofane se le kotsi, u ka khona ho sutumelletsa throttle holimo!
P. Na molaoli oa sefofane o tšehetsa lisebelisoa tse kang FM30 le HM30?
A. Tšehetso. Selaoli sa sefofane se ka ntšang theMAVLINK ka litefiso tse peli tsa baud tsa 57600 le 115200. Mosebedisi a ka hokela boemakepe ba T1 ba sefofane ho RX ya sesebediswa sa phetiso ya data, ebe o kgetha sekhahla se loketseng sa baud ho .
P. Hobaneng ha enjene e lula e lla?
A.&
Q.RTH kapa FENCE kapa HOVER kapa ALT* mokhoa o fetoha ALT.
A.RTH /FENCE /HOVER/ALT* e ka sebelisoa feela ha GPS e tsitsitse, ho seng joalo e tla fetoha ALT.
Q.RSSI e fosahetse.
A. Sheba hore na RSSI e behiloe mocha ofe ho RC, ebe u fetola selaoli sa sefofaneng ho ea ho mocha o lumellanang; RSSI e nang le wiring e ikemetseng ha e tšehetsoe; Ha u sebelisa ELRS, haeba RC e sitoa ho beha mocha o ikemetseng oa RSSI, o ka beha ho menu ea OSD ho , e tla bontša LQI (Link Quality Indication).
Q. Ke hobane'ng ha SBUS ka tsela e iketsang hlokomela failsafe?
K. Hobane baamohedi ba bang ha se SBUS e tlwaelehileng, molaodi wa sefofane a ka nna a se kgone ho tseba ka boyena hore na ke efefeelsafe. Tabeng ena, mosebedisi o lokela ho iketsetsa ka bowena failsafe. Ka kopo, sheba .
Q. ALT* ha e khone ho boloka tataiso.
A. Hlahloba hore na lithupa tsa ROLL le PITCH li tsepamisitsoe.
P. The throttle e fetoha ka tšohanyetso ha o sebetsa lithupa ho ALT *.
A. Ha moqolo kapa thupa ea sekontiri e ntse e tsamaea, throttle e laoloa ka letsoho; ka mor'a hore thupa e khutlisetsoe bohareng, tlhahiso ea throttle e laoloa ka boomo ke molaoli oa sefofane ho latela lebelo la ho tsamaea. Ka hona, haeba ho na le phapang e kholo pakeng tsa throttle manual le throttle ea sebele e baloang ke molaoli oa sefofane ha thupa e ntse e tsamaea, e tla baka phetoho ea tšohanyetso ho throttle.
P. Mabapi le khamera ea likanale tse peli.
K. Ha o sebelisa kh'amera e le 'ngoe feela, kanale ea CAM1 e buleloa ka mokhoa oa kamehla. Haeba khamera e hokahane le CAM2, ho ke ke ha e-ba le tlhahiso ea setšoantšo, empa ho tla ba le OSD. Ha o sebelisa lik'hamera tse peli, o hloka feela ho seta, o ka fetola skrine ka mocha o lumellanang; Ha o sebelisa likhamera tse peli, ho khothaletsoa hore likhamera ka bobeli li be ka sebopeho sa PAL kapa NTSC. Sena se ka qoba ho thekesela ha setšoantšo kapa OSD ha u switjha. Ho boetse ho khothaletsoa ho sebelisa likhamera tsa sebopeho sa PAL. Mehala ea OSD e itekanetse 'me phello ea pontšo e ntle.
Q.Ke mofuta ofe oa GPS o ka sebelisoang ho laola sefofane?
A. Protocol ea tšehetso ea SPARROW V3 Pro ke UBLOX 'me ha e tšehetse melaoana ea NMEA. Ka hona, ka kopo ela hloko ha u khetha. Letoto le tšehetsang UBLOX le kenyelletsa meloko ea 6, 7, 8th, 9th le 10th.
P. Mabapi le bothata ba hona joale ba sensor.
A. Boholo ba hajoale boo FC e ka bo lekanyang ka katleho ke 80A, 'me boholo ba hajoale boo FC e ka bo mamellang ke 120A. Kamora ho feta 80A, boleng ba ponts'o ha bo sa nepahala. Ka nako e ts'oanang, e le ho netefatsa polokeho ea FC, ha e khothalletsoe hore basebelisi ba e sebelise ho feta moeli; Ha o sebelisa motlakase o moholo ka har'a sebaka sa ho lekanya nako e telele (mohlalaample, ho feta 50A ka nako e telele), ho phahama ha mocheso ho bakoang ke libaka tse fapaneng tsa hona joale le tsa mocheso oa mocheso le tsona li tlameha ho nkoa. Ho phahama ho feteletseng ha mocheso ho ka 'na ha etsa hore solder e qhibilihe le ho ama polokeho ea sefofaneng. Haeba u hloka ho fofa ka nako e telele ka nako e telele, ho kgothaletswa hore u leke fatše pele.
Lisebelisoa tsa Tlhaloso
Mohala oa khamera x 2: E lumellana le CADDX le tatelano e meng ea terata ea khamera. Etsa bonnete ba ho hlahloba hore na tatellano ea terata e hloka ho fetoloa pele o sebelisoa.
VTX terata x 1: E lumellana le PandaRC le tatellano e meng ea terata ea VTX. Etsa bonnete ba ho hlahloba hore na tatellano ea terata e hloka ho fetoloa pele o sebelisoa.
Litokomane / Lisebelisoa
 |
LeFeiRC SPARROW V3 Pro OSD Flight Controller Gyro Stabilization Return [pdf] Bukana ea Mosebelisi SPARROW V3 Pro OSD Flight Controller Gyro Stabilization Return, SPARROW V3 Pro, OSD Flight Controller Gyro Stabilization Return, Controller Gyro Stabilization Return, Gyro Stabilization Return, Stabilization Return |