invt TM700 Series Programmable Controller
Litlhaloso tsa Sehlahisoa
- Lebitso la Sehlahisoa: TM700 series programmable controller
- E ntlafalitsoe ke: INVT
- E tšehetsa: bese ea EtherCAT, bese ea Ethernet, RS485
- Likarolo: Li-interface tsa I / O tse lebelo le holimo, ho fihlela ho li-module tsa 16 tsa katoloso ea lehae
- Katoloso: Mesebetsi ea CANopen/4G e ka atolosoa ka likarete tsa katoloso
Litaelo tsa Tšebeliso ea Sehlahisoa
Ho kenya
Bukana haholo-holo e kenyelletsa ho kenya le ho kenya mohala oa sehlahisoa. E kenyelletsa lintlha tsa sehlahisoa, ho kenya mochini, le ho kenya motlakase.
Mehato ea ho Kenya Pele
- Bala bukana ka hloko pele u kenya "programmable controller".
- Netefatsa hore basebetsi ba sebetsanang le ho kenya ba na le tsebo ea botsebi ba motlakase.
- Sheba Bukana ea Mananeo ea INVT Medium and Large PLC le INVT Medium and Large PLC Software Manual bakeng sa maemo a ntlafatso ea mananeo a basebelisi le mekhoa ea meralo.
Litaelo tsa Wiring
Latela litšoantšo tsa lithapo tse fanoeng bukeng ea tataiso bakeng sa khokahano e nepahetseng ea programmable controller@
Ho Matla le ho Etsa Teko
- Ka mor'a ho kenya le ho kenya marang-rang, kenya matla ho molaoli o hlophisitsoeng.
- Lekola tšebetso ea molaoli ka ho sebelisa mananeo a mang a mantlha kapa lintho tse kenang/liphetho.
Lipotso tse atisang ho botsoa (FAQ)
- P: Nka fumana phetolelo ea morao-rao ea matsoho hokae?
A: U ka khoasolla phetolelo ea morao-rao ea matsoho ho tsoa ho semmuso websebaka www.invt.com. Ntle le moo, o ka skena khoutu ea QR ntlong ea sehlahisoa ho fihlella bukana. - P: Ke mehato efe ea ts'ireletso e lokelang ho lateloa ha u sebelisa letoto la li-programmable controller tsa TM700?
A: Pele o falla, o kenya, o kenya marang-rang, o laela le ho tsamaisa selaolo se ka khonehang, bala ka hloko 'me u latele litemoso tsohle tsa tšireletso tse boletsoeng bukeng ea litaelo ho thibela tšenyo ea thepa kapa kotsi ea' mele.
Selelekela
Fetileview
- Kea leboha ha u khethile TM700 series programmable controller (programmable controller for short).
- TM700 series programmable controllers ke moloko o mocha oa lihlahisoa tse mahareng tsa PLC tse entsoeng ka boithaopo ke INVT, e tšehetsang bese ea EtherCAT, bese ea Ethernet, RS485, li-interfaces tsa I / O tsa lebelo le phahameng, le li-modules tsa ho atolosa sebakeng sa 16. Ho feta moo, mesebetsi e kang CANopen/4G e ka atolosoa ka likarete tsa katoloso.
- Bukana e tsebisa haholo ka ho kenya le ho kenya likhoele tsa sehlahiswa, ho kenyeletswa le tlhahisoleseding ka sehlahiswa, ho kenngwa ha mochini, le ho kenya motlakase.
- Bala bukana ena ka hloko pele u kenya "programmable controller". Bakeng sa lintlha tse mabapi le tikoloho ea nts'etsopele ea lenaneo la basebelisi le mekhoa ea ho rala mananeo a basebelisi, bona Buka ea Mananeo ea INVT Medium and Large PLC le INVT Medium and Large PLC Software Manual.
- Bukana e ka fetoha ntle le tsebiso pele. Ke kopa o etele www.invt.com ho khoasolla phetolelo ea morao-rao ea matsoho.
Bamameli
Basebetsi ba nang le tsebo ea botsebi ba motlakase (joalo ka baenjiniere ba motlakase ba tšoanelehang kapa basebetsi ba nang le tsebo e lekanang).
Mabapi le ho fumana litokomane
Bukana ena ha e fanoe hammoho le sehlahisoa. Ho fumana mofuta oa elektroniki oa PDF file, o ka: Etela www.invt.com, khetha Tšehetso > Khoasolla, kenya lentsoe la sehlooho, ebe o tobetsa Batla. Skena khoutu ea QR ntlong ea sehlahisoa→ Kenya lentsoe la sehlooho ebe u khoasolla bukana.
Fetola nalane
Bukana e ka fetoha ka linako tse ling ntle le tsebiso esale pele ka lebaka la ntlafatso ea mofuta oa sehlahisoa kapa mabaka a mang.
| Che. | Fetola tlhaloso | Phetolelo | Letsatsi la ho nšoa |
| 1 | Tokollo ea pele. | V1.0 | Phato 2024 |
Mehato ea tšireletso
Phatlalatso ea polokeho
Bala bukana ena ka hloko 'me u latele mehato eohle ea ts'ireletso pele u falla, u kenya, ho kenya mohala, ho laela le ho tsamaisa selaoli se ka khonehang. Ho seng joalo, tšenyo ea lisebelisoa kapa kotsi ea 'mele kapa lefu li ka bakoa.
Re ke ke ra jara boikarabelo kapa boikarabello bakeng sa tšenyo leha e le efe ea thepa kapa kotsi ea 'mele kapa lefu le bakoang ke ho hlōleha ho latela mehato ea tšireletso.
Tlhaloso ea boemo ba polokeho
Ho netefatsa polokeho ea botho le ho qoba tšenyo ea thepa, u tlameha ho ela hloko matšoao a temoso le malebela a bukaneng ea tataiso.
| Tlhokomediso matšoao | Lebitso | Tlhaloso | ||||
 |
Kotsi | Kotsi e tebileng ea botho kapa lefu
litlhoko ha li lateloe. |
ka khona | sephetho | if | amanang |
 |
Tlhokomediso | Tšenyo ea motho kapa lisebelisoa
litlhoko ha li lateloe. |
ka khona | sephetho | if | amanang |
Litlhoko tsa basebetsi
Litsebi tse koetlisitsoeng le tse hloahloa: Batho ba sebelisang thepa ba tlameha hore ebe ba fumane koetliso ea litsebi tsa motlakase le polokeho, 'me ba tlameha ho tseba mehato eohle le litlhoko tsa ho kenya lisebelisoa, ho laela, ho sebetsa le ho hlokomela le ho khona ho thibela maemo a tšohanyetso afe kapa afe ho latela liphihlelo.
Litataiso tsa polokeho
| Melao-motheo e akaretsang | |
| |
|
| Ho tlisa le ho kenya | |
| |
|
| Wiring | |
| |
|
| Ho laela le ho sebetsa | |
| |
|
| Tlhokomelo le phetoho ea karolo | |
| |
|
| Ho lahla | |
| |
|
 |
|
Sehlahisoa se felileview
Letlapa la lebitso la sehlahisoa le mohlala 
| Mohlala | Litlhaloso |
| TM750 | A qetile molaoli; PLC e mahareng; EtherCAT; 4 lilepe; 2 × Ethernet; 2×RS485; 8 lintlha le tse 8 tse hlahisoang. |
| TM751 | A qetile molaoli; PLC e mahareng; EtherCAT; 8 lilepe; 2 × Ethernet; 2×RS485; 8 lintlha le tse 8 tse hlahisoang. |
| TM752 | A qetile molaoli; PLC e mahareng; EtherCAT; 16 lilepe; 2 × Ethernet; 2×RS485; 8 lintlha le tse 8 tse hlahisoang. |
| TM753 | A qetile molaoli; PLC e mahareng; EtherCAT; 32 lilepe; 2 × Ethernet; 2×RS485; 8 lintlha le tse 8 tse hlahisoang. |
Tlhaloso ea sefahleho 
| Che. | Mofuta oa boema-kepe | Sehokedi
seka |
Tlhaloso | Tlhaloso |
| 1 | Letšoao la I/O | – | Pontšo ea boemo ba I/O | Bula: Kenyelletso/sephetho se nepahetse. E tima: Kenyelletso/sephetho ha se sebetse. |
| Che. | Mofuta oa boema-kepe | Sehokedi
seka |
Tlhaloso | Tlhaloso |
| 2 | Qala/ emisa ho fetola DIP | MATSHA | Boemo ba ho sebetsa ha lenaneo la mosebelisi | Fetolela ho RUN: Lenaneo la mosebelisi lea sebetsa. Retelehela ho EMA: Lenaneo la basebelisi lea ema. |
| EMA | ||||
| 3 | Letšoao la boemo ba ts'ebetso | PWR | Pontšo ea boemo ba matla | Bula: Motlakase o tloaelehile. E tima: Phepelo ea motlakase ha e ea tloaeleha. |
| MATSHA | Pontšo ea boemo bo mathang | Bula: Lenaneo la mosebelisi le ntse le sebetsa. E tima: Lenaneo la basebelisi lea emisa. |
||
|
ERR |
Ho sebetsa ponts'o ea boemo ba phoso | On: Ho etsahala phoso e tebileng. Flash: Liphoso tse akaretsang. Koala: Ha ho phoso e etsahalang. |
||
| 4 | Karete ea katoloso
sekotjana |
– | Slot ea karete ea katoloso, e sebelisetsoang katoloso ea ts'ebetso. | Sheba karolo ea Sehlomathiso A lisebelisoa tsa karete ea Katoloso. |
| 5 | RS485 sebopeho |
R1 |
Sehanyetsi sa terminal sa 1 |
Mohanyetsi oa 120Ω o hahiloeng ka hare; Short-circuit e bonts'a khokahanyo ea 120Ω terminal resistor. |
| A1 | Letšoao la puisano la Channel 1 485 + | – | ||
| B1 | Letšoao la puisano la Channel 1 485- | – | ||
| R2 | Sehanyetsi sa terminal sa 2 | Mohanyetsi oa 120Ω o hahiloeng ka hare; Short-circuit e bonts'a khokahanyo ea 120Ω terminal resistor. | ||
| A2 | Letšoao la puisano la Channel 2 485 + | – | ||
| B2 | Letšoao la puisano la Channel 2 485- | – | ||
| GND | Sebaka sa tšupiso sa lets'oao la puisano la RS485 | – | ||
| PE | PE | – | ||
| 6 | Sehokelo sa matla | 24V | Motlakase oa DC 24V + | – |
| 0V | Motlakase oa DC 24V- | – | ||
| PE | PE | – | ||
| 7 | Boema-kepe ba Ethernet | Ethernet 2 | Khokahano ea puisano ea Ethernet | IP ya kamehla: 192.168.2.10 Letshwao le letala ho: Le bontsha hore lehokelo le thehilwe ka katleho. Green indicator off: E bontša hore sehokelo ha se so thehoe. Yellow indicator flashing: Ho bontsha hore puisano e ntse e tswela pele. Yellow indicator off: E bontsha hore ha ho na puisano. |
| Che. | Mofuta oa boema-kepe | Sehokedi seka | Tlhaloso | Tlhaloso |
| 8 | Boema-kepe ba Ethernet | Ethernet 1 | Khokahano ea puisano ea Ethernet | IP ya kamehla: 192.168.1.10 Letshwao le letala ho: Le bontsha hore lehokelo le thehilwe ka katleho. Green indicator off: E bontša hore sehokelo ha se so thehoe. Yellow indicator flashing: Ho bontsha hore puisano e ntse e tswela pele. Yellow indicator off: E bontsha hore ha ho na puisano. |
| 9 | Khokahano ea EtherCAT | EtherCAT | Khokahano ea puisano ea EtherCAT | Green indicator on: E bontsha hore sehokelo se thehilwe ka katleho. Green indicator off: E bontša hore sehokelo ha se so thehoe. Yellow indicator flashing: Ho bontsha hore puisano e ntse e tswela pele. Yellow indicator off: E bontsha hore ha ho na puisano. |
| 10 | I/O terminal | – | 8 lintho tse kenang le tse 8 tse hlahisoang | Bakeng sa lintlha tse ling, sheba karolo ea 4.2 I/O wiring terminal. |
| 11 | Khokahano ea karete ea MicroSD | – | – | E sebelisoa bakeng sa lenaneo la firmware, file ho bala le ho ngola. |
| 12 | Sehokelo sa mofuta oa C |  |
Puisano pakeng tsa USB le PC | E sebelisetsoa ho jarolla le ho lokisa liphoso.
IP e ikemetseng: 192.168.3.10 |
| 13 | Tobetsa konopo ea betri | CR2032 | Slot ea betri ea oache ea RTC | E sebetsa ho betri ea konopo ea CR2032 |
 Hlokomela: Sehlahisoa ha se a hlomelloa ka konopo ea betri joalo ka tlhophiso e tloaelehileng ka ho sa feleng. Betri ea konopo e rekiloe ke mosebelisi, 'me mohlala ke CR2032. |
||||
| 14 | Sehokedi sa sefofane | – | Bese ea lehae ea katoloso ea sefofane | E hokahane le li-module tsa katoloso ea lehae |
Litlhaloso tsa sehlahisoa
Litlhaloso tse akaretsang
| Ntho | TM750 | TM751 | TM752 | TM753 |
| Sebopeho sa Ethernet | 2 likanale | 2 likanale | 2 likanale | 2 likanale |
| Khokahano ea EtherCAT | 1 kanale | 1 kanale | 1 kanale | 1 kanale |
| Max. palo ea lilepe (bese+pulse) | 4 lilepe + 4 lilepe | 8 lilepe + 4 lilepe | 16 lilepe + 4 lilepe | 32 lilepe + 4 lilepe |
| RS485 bese | 2, e tšehetsang Modbus RTU master / mosebetsi oa makhoba le boema-kepe ba mahala | |||
| Ntho | TM750 | TM751 | TM752 | TM753 |
| tshebetso. | ||||
| Bese ea EtherNet | E tšehetsa Modbus TCP, OPC UA, TCP/UDP, ho kenya le ho jarolla lenaneo,
le ntlafatso ea firmware. |
|||
| Sehokelo sa mofuta oa C | 1, e tšehetsang ho kenya le ho jarolla lenaneo, le ntlafatso ea firmware. | |||
| DI | 8 ea mantlha, ho kenyeletsoa le 200kHz ea lebelo le holimo | |||
| DO | Liphetho tse 8 qalong, ho kenyelletsa le 200kHz e phahameng ka lebelo | |||
| Pulse axis | E ts'ehetsa liteishene tse fihlang ho 4 | |||
| Matla a kenyang | 24VDC (-15%–+ 20%) / 2A, e tšehetsang tšireletso ea ho khutlisa | |||
| Tšebeliso ea matla a ikemetseng | <10W | |||
| Phepelo ea motlakase ka bese | 5V/2.5A | |||
| Ts'ebetso ea ts'ireletso ea ho felloa ke matla | E tšehelitsoe Hlokomela: Ho boloka matla a tlase ha ho etsoe nakong ea metsotsoana e 30 ka mor'a ho tima. |
|||
| Oache ea nako ea sebele | E tšehelitsoe | |||
| Li-module tsa katoloso ea lehae | Ho fihla ho 16, ha ho lumelle ho fapanyetsana ho chesang | |||
| Karete ea katoloso ea lehae | Karete e le 'ngoe ea katoloso, e tšehetsang karete ea CANopen, karete ea 4G IoT joalo-joalo. | |||
| Puo ea lenaneo | IEC61131-3 lipuo tsa lenaneo (SFC, LD, FBD, ST, IL, CFC) | |||
| Lenaneo la ho jarolla | Sehokelo sa mofuta oa C, boema-kepe ba Ethernet, karete ea MicroSD, download e hole (4G IoT
karete ea katoloso) |
|||
| Lenaneo la data bokhoni | 20MByte lenaneo la basebelisi
64MByte mefuta e fapaneng ea tloaelo, e nang le 1MByte e tšehetsang ho boloka matla a tlase |
|||
| Boima ba sehlahisoa | Hoo e ka bang. 0.35 lik'hilograma | |||
| Dimension litekanyo | Sheba karolo ea Sehlomathiso sa B Metako ea tekanyo. | |||
Litlhaloso tsa tlhahiso ea DI
| Ntho | Tlhaloso |
| Mofuta oa ho kenya | Kenyelletso ea dijithale |
| Palo ea liteishene tsa ho kenya | 8 likanale |
| Mokhoa oa ho kenya | Mofuta oa mohloli / sink |
| Keletso voltage sehlopha | 24VDC (-10%–+10%) |
| Kenya hona joale | X0–X7 likanale: Ke 13.5mA ha E BUTSE (boleng bo tloaelehileng), 'me e ka tlase ho 1.7mA ha TIMA. |
| Max. makhetlo a ho kenya | X0–X7 likanale: 200kHz; |
| Ho hanyetsa ho kenya | Boleng bo tloaelehileng ba likanale tsa X0–X7: 1.7kΩ |
| ON voltage | ≥15VDC |
| TSOA voltage | ≤5VDC |
| Mokhoa oa ho itšehla thajana | Integrated chip capacitive isolation |
| Mokhoa o tloaelehileng oa terminal | Likanale tse 8 / terminal e tloaelehileng |
| Pontšo ea ketso ea ho kenya | Ha tlhahiso e le boemong ba ho khanna, letšoao la ho kenya le buletsoe (taolo ea software). |
ETSA lintlha tsa tlhahiso
| Ntho | Tlhaloso |
| Mofuta oa tlhahiso | Sephetho sa Transistor |
| Palo ea liteishene tse hlahisoang | 8 likanale |
| Mokhoa oa ho tsoa | Mofuta oa sink |
| Sephetho voltage sehlopha | 24VDC (-10%–+10%) |
| Moroalo o tsoang (ho hanyetsa) | 0.5A/point, 2A/8 lintlha |
| boima ba tlhahiso (inductance) | 7.2W/point, 24W/8 lintlha |
| Nako ea karabo ea Hardware | ≤2μs |
| Laola tlhoko ea hajoale | Laela hona joale ≥ 12mA ha maqhubu a tlhahiso a feta 10kHz |
| Max. sekhahla sa tlhahiso | 200kHz bakeng sa mojaro oa ho hanyetsa, 0.5Hz bakeng sa mojaro oa ho hanyetsa, le 10Hz bakeng sa mojaro o bobebe |
| Leakage current ho OFF | Ka tlase ho 30μA (boleng ba hajoale ka voltage ea 24VDC) |
| Max. masalla voltage ho ON | ≤0.5VDC |
| Mokhoa oa ho itšehla thajana | Integrated chip capacitive isolation |
| Mokhoa o tloaelehileng oa terminal | Likanale tse 8 / terminal e tloaelehileng |
| Ts'ebetso ea ts'ireletso ea potoloho e khuts'oane | E tšehelitsoe |
| Tlhokahalo ea mojaro oa kantle oa inductive | Flyback diode e hlokahalang bakeng sa khokahanyo ea mojaro oa kantle. Sheba Setšoantšo sa 2-1 bakeng sa setšoantšo sa wiring. |
| Pontšo ea ketso ea tlhahiso | Ha tlhahiso e nepahetse, letšoao la tlhahiso le buletsoe (taolo ea software). |
| Ho nyenyefatsa sephetho | Boemo ba hona joale sehlopheng se seng le se seng sa terminal e tloaelehileng e ke ke ea feta 1A ha mocheso oa tikoloho o le 55 ℃. Sheba Setšoantšo sa 2-2 bakeng sa lekhalo la ho fokotsa coefficient. |
Litlhaloso tsa RS485
| Ntho | Tlhaloso |
| Likanale tse tšehelitsoeng | 2 likanale |
| Sehokelo sa Hardware | Terminal ea mohala (2×6Pin terminal) |
| Mokhoa oa ho itšehla thajana | Integrated chip capacitive isolation |
| Sehanyetsi sa terminal | E hahelletsoeng ka har'a terminal ea 120Ω, e ka khethoang ka ho khutsufatsa R1 le R2 ho theminale ea 2×6 PIN e moleng. |
| Palo ea makhoba | Seteishene se seng le se seng se tšehetsa makhoba a ka bang 31 |
| Sekhahla sa baud ea puisano | 9600/19200/38400/57600/115200bps |
| Tšireletso ea ho kenya | E ts'ehetsa ts'ireletso ea khokahano e fosahetseng ea 24V |
Litlhaloso tsa EtherCAT
| Ntho | Tlhaloso |
| Protocol ea puisano | EtherCAT |
| Litšebeletso tse tšehelitsoeng | CoE (PDO/SDO) |
| Mokhoa oa ho amahanya | Lioache tse ajoang bakeng sa servo;
I/O e amohela khokahano ea ho kenya le ea tlhahiso |
| lera 'meleng | 100BASE-TX |
| Sekhahla sa Baud | 100Mbps (100Base-TX) |
| Mokhoa oa Duplex | Duplex e felletseng |
| Sebopeho sa Topology | Sebopeho sa linear topology |
| Phetiso ea maqhubu | Lithapo tsa marang-rang tsa sehlopha-5 kapa holimo |
| Sebaka sa phetiso | Sebaka se pakeng tsa li-node tse peli se ka tlase ho 100m. |
| Palo ea makhoba | E tšehetsa makhoba a ka bang 72 |
| Bolelele ba foreimi ea EtherCAT | 44 byte–1498 byte |
| Lintlha tsa Ts'ebetso | Ho fihla ho li-byte tse 1486 bakeng sa foreimi e le 'ngoe ea Ethernet |
Litlhaloso tsa Ethernet
| Ntho | Tlhaloso |
| Protocol ea puisano | Protocol e tloaelehileng ea Ethernet |
| lera 'meleng | 100BASE-TX |
| Sekhahla sa Baud | 100Mbps (100Base-TX) |
| Mokhoa oa Duplex | Duplex e felletseng |
| Sebopeho sa Topology | Sebopeho sa linear topology |
| Phetiso ea maqhubu | Lithapo tsa marang-rang tsa sehlopha-5 kapa holimo |
| Sebaka sa phetiso | Sebaka se pakeng tsa li-node tse peli se ka tlase ho 100m. |
Ho kenya mochine
Litlhoko tsa tikoloho ea ho kenya
Ha u kenya sehlahisoa sena seporong sa DIN, ho nahanela ka botlalo ho sebetsa, ho boloka, le ho hanyetsa tikoloho pele ho kenngoa.
| Ntho | Tlhaloso |
| Sehlopha sa IP | IP20 |
| Boemo ba tšilafalo | Boemo ba 2: Ka kakaretso ho na le tšilafalo e seng ea conductive feela, empa u tla nahana ka conductivity ea nakoana ka phoso e bakiloeng ke condensation. |
| Bophahamo | ≤2000m(80kPa) |
| Sesebelisoa sa tšireletso sa overcurrent | 3 A fuse |
| Max. mocheso o sebetsang | 45°C ka mojaro o felletseng. Ho hlokahala ho fokotsa mocheso ha mocheso o le 55°C. Ho fumana lintlha, sheba setšoantšo sa 2-2. |
| Mocheso oa polokelo le mefuta ea mongobo | Mocheso: ‑20℃–+60℃; mongobo o lekanyelitsoeng: ka tlase ho 90% RH mme ha ho na condensation |
| Mocheso oa lipalangoang le mefuta e fapaneng ea mongobo | Mocheso: ‑40℃–+70℃; mongobo o lekanyelitsoeng: ka tlase ho 95% RH mme ha ho na condensation |
| Mocheso o sebetsang le mefuta ea mongobo | Mocheso: ‑20℃–+55℃; mongobo o lekanyelitsoeng: ka tlase ho 95% RH mme ha ho na condensation |
Ho kenya le ho qhaqholla
Ho kenya
Kenyelletso e kholo
Lokisetsa mong'a seporo sa DIN, 'me ue tobetse ka hare ho fihlela master le terene ea DIN e le clamped (ho na le molumo o hlakileng oa clampka mor'a hore li kenngoe sebakeng).
Tlhokomeliso: Monghali o sebelisa seporo sa DIN bakeng sa ho kenya.
Ho kenngoa pakeng tsa master le module
Lumellanya mojule le seporo sa khokahano le seporo se thellang, 'me u se sutumelle ka hare ho fihlela mojule o kopana le seporo sa DIN (ho na le molumo o hlakileng oa boitlamo ha o kentsoe sebakeng).
Tlhokomeliso: Mong'a le module ba sebelisa seporo sa DIN bakeng sa ho kenya.
Ho kenya karete ea ho atolosa
Ntša sekoaelo pele u kenya karete ea ho atolosa. Mehato ea ho kenya ke e latelang.
- Mohato oa 1 Sebelisa sesebelisoa ho phunya sekoahelo ka bonolo ka lehlakoreng la sehlahisoa (ka tatellano ea boemo ba 1 le 2), 'me u ntše sekoahelo ka ho le letšehali.
Bohato ba 2 Tsamaisa karete ea katoloso ka har'a sekotjana sa tataiso ka mokhoa o ts'oanang, ebe o tobetsa libaka tse kaholimo le tse tlase tsa karete ea katoloso ho fihlela karete ea katoloso e le cl.amped (ho na le molumo o hlakileng oa clampka mor'a hore li kenngoe sebakeng).
Ho kenya betri ea konopo
- Mohato oa 1 Bula konopo ea sekoaelo sa betri.
- Bohato ba 2 Tobetsa konopo ea betri ka har'a konopo ea betri ka tsela e nepahetseng, 'me u koale konopo sekoaelo sa betri.
Hlokomela:
- Ka kopo hlokomela anode le cathode ea betri.
- Ha betri e kentsoe 'me software ea lenaneo e tlaleha alamo ea betri e tlase, betri e hloka ho nkeloa sebaka.
Ho qhaqha
Master disassembly
Mohato oa 1 Sebelisa screwdriver e otlolohileng kapa lisebelisoa tse tšoanang ho phunya seporo sa snap-fit.
Mohato oa 2 Hula mojule pele.
Bohato ba 3 Tobetsa bokaholimo ba seporo hore se kene sebakeng. 
ho qhaqholla ha terminal
- Mohato oa 1 Tobetsa sekotwana se kaholimo ho terminal (karolo e phahamisitsoeng). Mohato oa 2 Tobetsa 'me u ntše terminal ka nako e le ngoe.
Ho qhaqholla ha betri ea konopo
Mehato ea disassembly ke e latelang:
- Mohato oa 1 Bula konopo ea sekoaelo sa betri. (Bakeng sa lintlha, bona karolo
Ho kenya betri ea konopo). - Mohato oa 2 Hlakola li-terminals tsa I/O (Bakeng sa lintlha, sheba karolo ea 3.2.2.2 I/O terminal disassembly).
- Bohato ba 3 Sebelisa screwdriver e nyane e otlolohileng ho sututsa betri ea konopo ka bonolo, joalo ka ha ho bonts'itsoe setšoantšong se latelang.
- Mohato oa 4 Ntša betri 'me u koale konopo sekoaelo sa betri.
Ho kenya motlakase
Litlhaloso tsa cable
Tafole 4-1 litekanyo tsa Cable bakeng sa thapo e le 'ngoe
| Bophara ba cable bo sebetsang | Mokotla oa cable ea tubula | |
| Sechaena standard/mm2 | Moamerika standard/AWG |  |
| 0.3 | 22 | |
| 0.5 | 20 | |
| 0.75 | 18 | |
| 1.0 | 18 | |
| 1.5 | 16 | |
| Pin | Letshwao | Tsela ea pontšo | Tlhaloso ea lets'oao |
| 1 | TD+ | Sephetho | Phetiso ea data + |
| 2 | TD- | Sephetho | Phetiso ea data- |
| 3 | RD+ | Kenyeletso | Ho amohela data + |
| 4 | ‑ | ‑ | Ha e sebelisoe |
| 5 | ‑ | ‑ | Ha e sebelisoe |
| 6 | RD- | Kenyeletso | Ho fumana lintlha- |
| 7 | ‑ | ‑ | Ha e sebelisoe |
| 8 | ‑ | ‑ | Ha e sebelisoe |
O wiring terminal
Tlhaloso ea terminal
| Leano setšoantšo | Lets'oao le letšehali | Theminale e ka ho le letšehali | Terminal e nepahetseng | Letshwao le letona |
 |
X0 tlhahiso | A0 | B0 | Sephetho sa Y0 |
| X1 tlhahiso | A1 | B1 | Sephetho sa Y1 | |
| X2 tlhahiso | A2 | B2 | Sephetho sa Y2 | |
| X3 tlhahiso | A3 | B3 | Sephetho sa Y3 | |
| X4 tlhahiso | A4 | B4 | Sephetho sa Y4 | |
| X5 tlhahiso | A5 | B5 | Sephetho sa Y5 |
| Setšoantšo sa moralo | Lets'oao le letšehali | Theminale e ka ho le letšehali | Terminal e nepahetseng | Letshwao le letona |
| X6 tlhahiso | A6 | B6 | Sephetho sa Y6 | |
| X7 tlhahiso | A7 | B7 | Sephetho sa Y7 | |
| SS e kenyang terminal e tloaelehileng | A8 | B8 | Sephetho se tloaelehileng sa COM |
Hlokomela:
- Kakaretso ea bolelele ba thapo ea katoloso ea sehokelo sa I/O se lebelo le holimo e tla ba ka har'a limithara tse 3.
- Nakong ea ho tsamaisa lithapo, likhoele li lokela ho tsamaisoa ka thoko ho qoba ho tlamahanngoa le likhoele tsa motlakase (high vol.tage le matla a maholo a hona joale) kapa lithapo tse ling tse fetisang matšoao a matla a tšitiso, 'me litsela tse tšoanang li lokela ho qojoa.
Ho kenya mohala oa theminale 
Wiring ea ho tsoa 
Tlhokomeliso: Flyback diode ea hlokahala bakeng sa khokahanyo ea mojaro oa kantle. Setšoantšo sa wiring se bontšitsoe ka tlase.
Wiring ea li-terminals tsa phepelo ea motlakase
Tlhaloso ea terminal 
Thapo ea motlakase 
RS485 marang-rang a marang-rang 
Hlokomela:
- Lipara tse sothehileng tse sirelelitsoeng li khothaletsoa bakeng sa bese ea RS485, 'me A le B li hokahantsoe ka lipara tse sothehileng.
- 120 Ω li-resistant tse tsamaellanang tsa li-terminal li hokahane lipheletsong tse peli tsa bese ho thibela ho bonahatsa mats'oao.
- Sebaka sa litšupiso tsa matšoao a 485 libakeng tsohle li hokahane hammoho.
- Sebaka sa mohala o mong le o mong oa lekala oa node e lokela ho ba tlase ho 3m.
Khokahano ea marang-rang ea EtherCAT 
Hlokomela:
- Hoa hlokahala ho sebelisa lithapo tse sothehileng tse sirelelitsoeng tsa sehlopha sa 5, ente ea polasetiki e bōpiloeng le shelled ea tšepe, e lumellanang le EIA/TIA568A, EN50173, ISO/IEC11801, EIA/TIA bulletin TSB, le EIA/TIA SB40-A&TSB36.
- Mohala oa marang-rang o tlameha ho fetisa tlhahlobo ea conductivity 100%, ntle le potoloho e khutšoanyane, potoloho e bulehileng, ho senyeha kapa ho kopana hampe.
- Ha o kopanya mohala oa marang-rang, tšoara hlooho ea kristale ea mohala ebe o e kenya ka har'a sebopeho sa Ethernet (RJ45 interface) ho fihlela e etsa molumo oa ho tobetsa.
- Ha u tlosa thapo ea marang-rang e kentsoeng, tobetsa mochine oa mohatla oa hlooho ea kristale 'me ue ntše sehlahisoa ka holimo.
Ethernet wiring 
Tlhaloso e 'ngoe
Sesebelisoa sa ho etsa mananeo
Sesebelisoa sa lenaneo: Invtmatic Studio. Mokhoa oa ho fumana lisebelisoa tsa lenaneo: Etela www.invt.com, khetha Tšehetso > Khoasolla, kenya lentsoe la sehlooho, ebe o tobetsa Batla.
Matha le ho emisa ts'ebetso
Kamora hore mananeo a ngoletsoe PLC, etsa ts'ebetso ea ho matha le ho emisa ka tsela e latelang.
- Ho tsamaisa sistimi, seta switch ea DIP ho RUN, 'me u netefatse hore letšoao la RUN le butse, le bonts'a 'mala o mosehla o motala.
- Ho emisa ts'ebetso, seta switch ea DIP ho STOP (ho seng joalo, o ka emisa ts'ebetso ka bokamorao ba molaoli oa moamoheli).
Tlhokomelo ea kamehla
- Hloekisa selaoli se lokiselitsoeng kamehla, 'me u thibele litaba tsa kantle ho naha hore li se ke tsa oela ho molaoli.
- Netefatsa moea o motle le maemo a ho qhala mocheso bakeng sa molaoli.
- Etsa litaelo tsa tlhokomelo 'me u leke molaoli khafetsa.
- Kamehla hlahloba lithapo le litheminale ho netefatsa hore li tiisitsoe ka mokhoa o sireletsehileng.
Ntlafatso ea firmware ea karete ea MicroSD
- Mohato oa 1 Kenya "Firmware e ntlafatsa karete ea MicroSD" sehlahisoa.
- Mohato oa 2 Matla holim'a sehlahisoa. Ha matšoao a PWR, RUN le ERR a le teng, e bontša hore ntlafatso ea firmware e felile.
- Bohato ba 3 Tlosa sehlahisoa, tlosa karete ea MicroSD, ebe o kenya sehlahisoa hape.
Hlokomela: Ho kenya karete ea MicroSD ho tlameha ho etsoa ka mor'a hore sehlahisoa se tima.
Sehlomathiso A Lisebelisoa tsa karete ea Katoloso
| Che. | Mohlala | Tlhaloso |
| 1 | TM-CAN | E ts'ehetsa bese ea CANopen |
| 2 | TM-4G | E tšehetsa 4G IoT |
Sehlomathiso sa B Litšoantšo tsa boholo
Mofani oa Hao o Tšepahalang oa IndustryAutomation Solution 
- Shenzhen INVT Electric Co., Ltd.
- Aterese: INVT Guangming Technology Building, Songbai Road, Matian,
- Setereke sa Guangming, Shenzhen, China
- INVT Power Electronics (Suzhou) Co., Ltd.
- Aterese: No. 1 Kunlun Mountain Road, Saense & Technology Town,
- Litereke tsa Gaoxin Suzhou, Jiangsu, Chaena
- Websebaka: www.invt.com
Copyright@ INVT. Lintlha tsa letsoho li ka fetoha ntle le tsebiso pele.
Litokomane / Lisebelisoa
 |
invt TM700 Series Programmable Controller [pdf] Bukana ea Mosebelisi TM700 Series Programmable Controller, TM700 Series, Programmable Controller, Controller |
