HT INSTRUMENTS MACROTESTG3 Multifunction Multi Tester
Specifikimet
- Qark i hapur voltage: 4 V deri në 12 V
- Rezistenca e izolimit (volumi DCtage):
- Test vëlltage [V]
- Gama [M]
- Resolution [M]
- Saktësia
- Rryma maksimale e provës: 5.81A (at 265V); 10.10A (at 457V)
- Test vëlltage vargjet: 100-265V (Line-Neutral) / 100-460V (Line-Line); 50/60Hz ±5%
- Mbrojtja e sigurisë: Linja Z (Linjë-Linjë, Linjë-Neutral, Linjë-PE)
- Materialet izoluese: PVC, Rubber butyl, EPR, XLPE
- First fault current (IT systems):
- Diapazoni (mA)
- Rezolucioni (mA)
- Kufizo kontaktin voltage (ULIM): 25V, 50V
Electrical Safety Testing
- Connect the safety tester according to the specified voltagvarg e.
- Select the appropriate insulation resistance test voltage.
- Measure the insulation resistance and ensure it falls within the specified accuracy range.
- Check the maximum test current and ensure it is within the safe limits for testing.
- Perform first fault current tests as required.
Testimi RCD
- Select the RCD type and rated tripping currents for testing.
- Set the Line-PE and Line-N voltage sipas specifikimeve.
- Perform RCD Molded type tripping time range tests based on the specific RCD type and current settings.
“`
Qark i hapur voltage: Short circuit current: Nominal test current: Safety protection:
nominal test voltage 0% +10% <6.0mA at 500V test voltage
>1mA if load= 1k*Vnom (Vnom=50V, 100V, 250V, 500V, 1000V) the display shows an error message for input voltage> 10V
Linja Z (Linjë-Linjë, Linjë-Neutral, Linjë-PE)
Gama []
Rezoluta []
Saktësia
0.00 199.9 m (*) 200 1999 m (*)
0.1 m (*) 1 m (*)
(5.0 rdg + 1m) (*)
0.01 9.99 10.0 199.9
0.01 0.1
(5.0 rdg + 3dgt)
(*) By means of IMP57 optional accessory
Rryma maksimale e provës
5.81A (at 265V); 10.10A (at 457V)
Test vëlltage ranges: Protection type: Insulation materials:
100265V (Line-Neutral) / 100460V (Line-Line); 50/60Hz 5% MCB (B, C, D, K), Fuse (gG, aM) PVC, Rubber butyl, EPR, XLPE
Rryma e parë e defektit (sistemet IT)
Diapazoni (mA)
Rezolucioni (mA)
0.1 0.9
0.1
1 999
1
Kufizo kontaktin voltage (ULIM)
25V, 50V
Accuracy (5.0 rdg + 1dgt) (5.0 rdg + 3dgt)
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
KU JEMI
MACROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 2 of 6
Testi RCD (tipi i kutisë së derdhur)
RCD type:
AC ( ), A/F ( ), B/B+( ) General (G), Selective (S) and Delayed ( )
Rated tripping currents (IN)::
6 mA, 10 mA, 30 mA, 100 mA, 300 mA, 500 mA, 650 mA, 1000 mA
Linja-PE, Linja-N vëllimitage:
100V 265V RCD type AC and A/F, 190V 265V RCD type B/B+
Frekuenca:
50/60 Hz 5%
RCD tripping current (Molded case type RCD General)
Lloji RCD
IN
Range IN [mA] Resolution [mA]
AC, A/F, B/B+
6 mA, 10 mA
AC, A/F, B/B+ 30mA IN 300mA (0.2 1.1) IN
0.1 IN
AC, A/F 500mA IN 650mA
Accuracy IN – 0%, +10%IN
– 0%, +5%IN
RCD Molded type tripping time range [ms] (TT/TN system)
x 1 / 2
x 1
x 2
x 5
AUTO
GS
GS
GS
GS
GS
6 mA 10 mA 30 mA
m
AC 999 999 999 999 999 999 160 210 A/F 999 999 999 999 999 999 160 210 B/B+ 999 999 999 999 999 999 AC 999 999 999 999 999 999 160 210 A/F 999 999 999 999 999 999 160 210 B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 160 210 A/F 999 999 999 999 999 999 160 210
50 150 50 150
50 150 50 150
50 150 50 150
B/B+ 999 999 999 999 999 999 AC 999 999 999 999 999 999 160 210 100mA A/F 999 999 999 999 999 999 160 210
50 150 50 150
B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 160 210 300mA A/F 999 999 999 999 999 999 160 210
B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 160 210
500 mA 650 mA
A / F
999 999 999 999 999 999 160 210
B/B+
50 150 50 150
50 150
AC 999 999 999 999 999 999 160 210 1000mA A/F 999 999 999 999 999 999
B/B+
Resolution: 1ms, Accuracy: (2.0rdg + 2dgt)
RCD Molded type tripping time range [ms] (IT system) (*)
GS
310 310 310 310 310 310
310 310 310 310 310 310 310 310 310 310 310
AUTO+ G S
x 1 / 2
x 1
x 2
x 5
AUTO
GS
GS
GS
GS
GS
6mA AC 999 999 999 999 999 999 160 210
10mA A/F 999 999 999 999 999 999 160 210
30mA B/B+ 999 999
999 999
100 mA 300 mA
AC A/F B/B+
999 999 999
999 999 999
999 999
999 999 999
999 999 999
999 999
160 160
210 210
500 mA 650 mA
AC A/F B/B+
999 999
999 999
999 999
999 999
999 999
999 999
160 160
210 210
50 150 50 150
50 150 50 150
50 150
AC 999 999 1000mA A/F 999 999
B/B+
999 999 999 999
160 210
Resolution: 1ms, Accuracy: (2.0rdg + 2dgt) (*) Selection RCD type A/F and type B/B+ available only for Norway country
GS
310 310 310 310 310
AUTO+
GS
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
KU JEMI
MACROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 3 of 6
Test në tokë për testuesin e vonesës së rrjedhjeve RCD (me aksesor opsional RCDX10)
RCD type: Rated tripping currents (IN):: Line-PE, Line-N voltage: Frekuenca:
AC ( ), A/F ( ), B/B+( ) General (G), Selective (S) and Delayed ( ) 0.3A 10A (type AC, A/F) ; 0.3A 3.0A (type B/B+) 100V 265V RCD type AC and A/F, 190V 265V RCD type B/B+ 50/60Hz 5%
Testuesi i vonesës së rrjedhjes së tokëzimit të rrymës së fikjes së RCD-ve (RCD General)
Lloji RCD
IN
Range IN [mA] Resolution [mA]
Accuracy IN
AC, A/F, B/B+ AC, A/F
300mA IN 1A 1.1A IN 10A
(0.3 1.1) IN
0.1 IN
– 0%, +5%IN
Testuesi i vonesës së rrjedhjes së tokëzimit Diapazoni kohor i ndërprerjes së RCD-ve [ms] (sistemi TT/TN)
x 1 / 2
x 1
x 2
x 5
AUTO
0.3A
1.0A
1.1A
3.0A
3.1A
6.5A
6.6A
10.0A
GS
GS
GS
AC 999 999 999 999 999 999 200 250
A/F 999 999 999 999 999 999 200 250
B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 200 250 A/F 999 999 999 999 999 999 200 250 B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 200 250 A/F 999 999 999 999 999 999 200 250 B/B+
AC 999 999 999 999 999 999 200 250 A/F 999 999 999 999 999 999 B/B+
G S 50 150 50 150
50 150 50 150
50 150 50 150
GS
G S 310 310 310 310 310
310 310
Resolution: 1ms, Accuracy: (2.0rdg + 2dgt)
Earth leakage delay tester RCDs trip out time range [ms] (IT system) (*)
x 1 / 2
x 1
x 2
x 5
GS
GS
GS
GS
0.3A
3.0A
AC A/F B/B+
999 999 999 999 999 999 200 250 999 999 999 999 999 999 200 250
50 150 50 150
3.1A
6.5A
AC A/F B/B+
999 999 999 999 999 999 200 250 999 999 999 999 999 999 200 250
50 150 50 150
6.6A
10.0A
AC A/F B/B+
999 999 999 999 999 999 200 250 999 999 999 999 999 999 200 250
Resolution: 1ms, Accuracy: (2.0rdg + 2dgt) (*) Selection RCD type A/F and type B/B+ available only for Norway country
AUTO G S
G S 310
310
NoTripTest Non-trip earth loop impedance
Test vëlltage:
100265V (Line-PE), 50/60Hz 5%
NoTripTest Systems with Neutral wire
Gama []
Rezoluta []
Saktësia (*)
0.01 9.99
0.01
(5 reading + N/10)
10.0 199.9
0.1
(5 reading + N)
200 1999
1
(5 reading + 3N)
(*) If IN <30mA, test current = IN/2 and N[]=30/IN; if IN 30mA, test current <15mA and N=1
NoTripTest Systems without Neutral wire
Gama []
Rezoluta []
Saktësia (*)
1 1999
1
-0%, +(5.0 lettura +N)
(*) if IN <30mA, test current = IN/2 and N[]=(10×30)/IN ; If IN 30mA, test current IN/2 and N[]=(3×30)/IN
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
KU JEMI
MACROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 4 of 6
Kontakt voltage (RCD dhe NoTripTest)
Gama [V]
Rezolucioni [V]
0 Utlim
0.1
Kontakt voltage (EARTH test TT system)
Gama [V]
Rezolucioni [V]
0 99.9
0.1
Kontakt voltage (EARTH test TN system)
Gama [V]
Rezolucioni [V]
0 99.9
0.1
100 999
1
Rezistenca e tokëzimit me metodën 3-telësh
Gama []
Rezoluta []
0.01 9.99
0.01
10.0 99.9
0.1
100 999
1
1.00k 49.99k
0.01 mijë
Rryma e provës:
<10mA 77.5Hz, Open-circuit voltage: < 20Vrms
(*) Shtoni 5% në saktësi nëse rezistencat e sondës (Rs ose Rh) janë > 100 x Rmeas
Accuracy -0%, +(5.0 rdg + 3V)
Accuracy -0%, +(5.0 rdg + 3V)
Accuracy -0%, +(5.0 rdg + 3V)
Saktësia (*)
(5.0 rdg + 3dgt)
Rezistenca e tokës me metodën Wenner me 4 tela
Range [m]
Resolution [m]
0.06 9.99
0.01
10.0 99.9
0.1
100 999
1
1.00k 9.99k
0.01 mijë
10.0k 99.9k
0.1 mijë
100k 999k
1k
1.00M 3.14M
0.01 milion
(*) with distance d=10m, Distance “d” range:
1 10 m
Rryma e provës:
<10mA 77.5Hz, Open-circuit voltage: < 20Vrms
Accuracy (*) (5.0 rdg + 3dgt)
Rrotullimi i sekuencës së fazës me metodën 1-tel
Vëlltagdiapazoni PN, P-PE[V]
Gama e frekuencës
100 265
50Hz/60Hz 5%
Matja kryhet vetëm me kontakt të drejtpërdrejtë me pjesët metalike nën tension (jo në mbështjellësin izolues)
Vëlltage drop on main power lines (V%)
diapazoni (%)
Rezolucioni (%)
0 100
0.1
Accuracy (10.0 rdg + 4dgt)
Rryma e rrjedhjes (nga HT96U opsionale clamp dhënës)
Diapazoni [mA]
Rezolucioni [mA]
0.5 999.9
0.1
Accuracy (5.0 rdg + 2dgt)
Parametrat mjedisorë (funksioni AUX)
Parametri
Gama
Temperatura [°C]
-20°C 80°C
Temperatura [°F]
-4°F 176°F
Lagështia relative [%HR]
0 100%HR
Dalja DC voltage
0.1mV 1.0V
0.001Lux 20.00 Lux (*)
Ndriçimi [Lux]
0.1 Lux 2000 Lux (*)
1 Lux 20 kLux (*)
(*) Saktësia e sondës luksoze HT53 është sipas Klasës AA
Resolution 0.1 °C 0.1 °F
0.1% UR 0.1mV
0.001 0.02 Lux 0.1 2 Lux 1 20 Lux
Accuracy (2.0rdg+2dgt)
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
KU JEMI
MACROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 5 of 6
Matja e parametrave kryesorë dhe harmonikëve (PQA)
AC TRMS Voltage
Range [V] 15.0 459.9
Allowed crest factor
Resolution [V] 0.1V
1,5 ; Frequency: 42.5 69.0 Hz
Accuracy (1.0rdg + 1dgt)
Frekuenca
Diapazoni [Hz]
Rezolucioni [Hz]
42.5 69.0
0.01
Lejohet vëlltage: 15.0 459.9V ; Allowed current: 5%FS clamp FS clamp
Accuracy (2.0rdg + 2dgt)
AC TRMS Rryma
FS clamp
Gama [A]
10A
5% FS 9.99
10A FS 200
5% FS 199.9
200A FS 3000
5% FS 2999
Range: 5 999.9 mV; Values under 5mV are zeroed
Allowed crest factor
3; Frequency: 42.5 69.0 Hz
Rezolucioni [A] 0.01 0.1 1
Saktësia
1Ph: (1.0rdg + 3 dgt) 3Ph: (2.0rdg + 5 dgt)
Active power (@ 230V in 1Ph systems, 400V in 3Ph systems, cos=1, f=50.0Hz)
FS clamp
Diapazoni [kW]
Rezolucioni [kW]
Saktësia
10A
0.000 9.999
0.001
10A FS 200
0.00 999.99
0.01
1Ph: (2.0rdg + 5 dgt)
200A FS 1000
0.0 999.9
0.1
3Ph: (2.5rdg + 8 dgt)
1000A FS 3000
0 9999
1
Reactive power (@ 230V in 1Ph systems, 400V in 3Ph systems, cos=0, f=50.0Hz)
FS clamp
Diapazoni [kVAr]
Rezolucioni [kVAr]
Saktësia
10A
0.000 9.999
0.001
10A FS 200
0.00 999.99
0.01
1Ph: (2.0rdg + 7 dgt)
200A FS 1000
0.0 999.9
0.1
3Ph: (3.0rdg + 8 dgt)
1000A FS 3000
0 9999
1
Faktori i fuqisë (@ 230V në sistemet 1Ph, 400V në sistemet 3Ph, f=50.0Hz)
Gama
Rezolucioni
Saktësia
0.70c 1.00 0.70i
0.01
(4.0rdg + 10dgt) if I 10%FS (2.0rdg + 3dgt) if I > 10%FS
cos (@ 230V in 1Ph systems, 400V in 3Ph systems, f=50.0Hz)
Gama
Rezolucioni
Saktësia
0.70c 1.00 0.70i
0.01
(4.0rdg + 10dgt) if I 10%FS (1.0rdg + 7dgt) if I > 10%FS
Vëlltagharmonikat e (@ 230V në sistemet 1Ph, 400V në sistemet 3Ph, f=50.0Hz)
Gama [%]
Rezolucioni [%]
Rendit
Saktësia
0.1 100.0
0.1
01 25
(5.0rdg + 5dgt)
Frequency of fundamental: 42.5 69.0 Hz, DC accuracy not declared
Harmonikat e rrymës (f=50Hz)
Gama [%]
Rezolucioni [%]
0.1 100.0
0.1
Porosit 01 9 10 17 18 25
Accuracy (5.0rdg + 5dgt) (10.0rdg + 5dgt) (15.0rdg + 10dgt)
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
KU JEMI
MACROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 6 of 6
2. SPECIFIKIMET E PËRGJITHSHME
DISPLAY AND MEMORY: Features: Memory: Communication:
Touch screen, color graphic LCD, 320x240mm 999 locations, 3 marker levels Optical-USB and built-in WiFi
POWER SUPPLY: Batteries: Battery life: Auto Power OFF:
6 x 1.2V(rechargeable) type AA or 6 x 1.5V type AA > 500 test for each function after 5 min of idleness (disabled)
MECHANICAL FEATURES: Dimensions (L x W x H): Weight (included batteries):
WORKING ENVIRONMENTAL CONDITIONS: Reference temperature: Working temperature: Allowed relative humidity: Storage temperature: Storage humidity:
TEST VERIFIES REFERENCE STANDARDS: Continuity test with 200mA: Insulation resistance: Earth resistance: Fault loop impedance: RCD test: Multifunction: Prospective short circuit current: Earth resistance on TN systems:
225 x 165 x 75 mm 1.2 kg
23°C 5°C 0°C 40°C <80%RH -10°C 60°C <80%RH
IEC/EN61557-4 IEC/EN61557-2 IEC/EN61557-5 IEC/EN61557-3 IEC/EN61557-6 IEC/EN61557-10 EN60909-0 EN61936-1 + EN50522
GENERAL REFERENCE STANDARDS: Safety of measuring instruments: Product type standard: Technical documentation : Insulation: Pollution degree: Encapsulation :
Mbivolumitage category: Max height of use:
IEC/EN61010-1, IEC/EN61010-031, IEC/EN61010-2-032 IEC/EN61557-1 IEC/EN61187 double insulation 2 IP40
CAT IV 300V (to ground), max 415V between inputs 2000m
Ky instrument plotëson kërkesat e Volumit të ulëttage Directive 2014/35/EU (LVD), EMC Directive 2014/35/EU and Directive RED 2014/53/EU
Ky instrument plotëson kërkesat e Direktivës Evropiane 2011/65/EU (RoHS) dhe 2012/19/BE (WEEE)
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
KU JEMI
Diensten nga EURO-INDEX
EURO-INDEX is fabrikant, importeur en distributeur van diverse A-merken op het gebied van test- en meetinstrumenten. Daarnaast leveren wij een groot aantal diensten om het gebruik van deze instrumenten in uw bedrijfsvoering te optimaliseren. Dit omvat uiteraard onderhoud, reparatie en kalibratie van de instrumenten, maar ook kennisdeling via de EURO-INDEX Academy en verhuur van instrumenten.
Geautoriseerd Service Centrum EURO-INDEX b.v. is van alle vertegenwoordigde merken een Geautoriseerd Service Centrum. Dit betekent dat uw instrumenten worden behandeld door technici die zijn opgeleid door de fabrikant en beschikken over de juiste gereedschappen en software. Er worden uitsluitend originele onderdelen toegepast en de garantie van uw instrument, evenals de certificering (ATEX, EN50379, etc.) blijven intact.
Kalibratielaboratorium
Ons moderne service- en kalibratielaboratorium beschikt over een
RvA accreditatie naar NEN-EN-ISO/IEC 17025. Deze accreditatie
geldt voor grootheden, zoals gespecificeerd in de scope bij accreditatienummer K105.
Meer info
Kijk voor een overzicht van al onze diensten op euro-index.nl/diensten
Mobiele Service
Naast de vaste kalibratielaboratoria in Capelle aan den IJssel
en Zaventem beschikken wij ook over laboratoria op wielen met
de naam “Mobiele Service”. Dit biedt vertrouwde
service en kwaliteit, bij u voor de deur!
Meer info
KWS®
KWS® is een uniek servicesysteem voor uw meetinstrumenten
met periodiek onderhoud en kalibratie tegen vaste, lage kosten.
Uw kalibratiecertificaten zijn digitaal beschikbaar via Mijn KWS (gratis webportaal en app).
Meer info
Verhuur van meetinstrumenten
Uitgebreid assortiment
Nauwkeurigheid aantoonbaar door actueel kalibratiecertificaat
Deskundig advies Complete levering inclusief accessoires
Meer info
EURO-INDEX Academy Trainingen (individueel en klassikaal) Cursussen en workshops Demonstratie- en instructievideo’s Whitepapers
Meer info
Servicebalie
Onderhoud, reparatie en kalibratie
Cursussen en workshops
Mobiele Service
Wijzigingen voorbehouden EURO-INDEX® NL 24005
Dokumentet / Burimet
 |
HT INSTRUMENTS MACROTESTG3 Multifunction Multi Tester [pdfUdhëzime MACROTESTG3 Multifunction Multi Tester, MACROTESTG3, Multifunction Multi Tester, Multi Tester |