HT INSTRUMENTS MACROTESTG3 Multifunction Multi Tester
Nā kikoʻī
- Kaapuni hamama voltage: 4V a 12V
- ʻO ke kūʻokoʻa ʻana (DC voltage):
- Hōʻike voltage [V]
- Launa [M]
- Resolution [M]
- Ka pololei
- ʻO ka hoʻāʻo kiʻekiʻe loa o kēia manawa: 5.81A (at 265V); 10.10A (at 457V)
- Hōʻike voltagnā pae: 100-265V (Line-Neutral) / 100-460V (Line-Line); 50/60Hz ±5%
- Palekana palekana: Laina Z (Line-Line, Line-Neutral, Line-PE)
- Nā mea hoʻokaʻawale: PVC, Rubber butyl, EPR, XLPE
- First fault current (IT systems):
- Māhele (mA)
- Hoʻoholo (mA)
- E kaupalena i ka pilina voltage (ULIM): 25V, 50V
Electrical Safety Testing
- Connect the safety tester according to the specified voltage laulā.
- Select the appropriate insulation resistance test voltage.
- Measure the insulation resistance and ensure it falls within the specified accuracy range.
- Check the maximum test current and ensure it is within the safe limits for testing.
- Perform first fault current tests as required.
Hoao RCD
- Select the RCD type and rated tripping currents for testing.
- Set the Line-PE and Line-N voltage like me na hoakaka.
- Perform RCD Molded type tripping time range tests based on the specific RCD type and current settings.
“`
Kaapuni hamama voltage: Short circuit current: Nominal test current: Safety protection:
nominal test voltage 0% +10% <6.0mA at 500V test voltage
>1mA if load= 1k*Vnom (Vnom=50V, 100V, 250V, 500V, 1000V) the display shows an error message for input voltage >10V
Laina Z (Line-Line, Line-Neutral, Line-PE)
Range []
Resolution []
Ka pololei
0.00 199.9 m (*) 200 1999 m (*)
0.1 m (*) 1 m (*)
(5.0 rdg + 1m) (*)
0.01 9.99 10.0 199.9
0.01 0.1
(5.0 rdg + 3dgt)
(*) By means of IMP57 optional accessory
ʻO kēia manawa hoʻāʻo kiʻekiʻe
5.81A (at 265V); 10.10A (at 457V)
Hōʻike voltage ranges: Protection type: Insulation materials:
100265V (Line-Neutral) / 100460V (Line-Line); 50/60Hz 5% MCB (B, C, D, K), Fuse (gG, aM) PVC, Rubber butyl, EPR, XLPE
ʻO ka hewa mua o kēia manawa (nā ʻōnaehana IT)
Māhele (mA)
Hoʻoholo (mA)
0.1 0.9
0.1
1 999
1
E kaupalena i ka pilina voltage (ULIM)
25V, 50V
Accuracy (5.0 rdg + 1dgt) (5.0 rdg + 3dgt)
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
AIA MAKOU
MAKROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 2 of 6
Ho'āʻo RCD (ʻano hihia i hoʻoheheʻe ʻia)
RCD type:
AC ( ), A/F ( ), B/B+( ) General (G), Selective (S) and Delayed ( )
Rated tripping currents (IN)::
6mA, 10mA, 30mA, 100mA, 300mA, 500mA, 650mA, 1000mA
Laina-PE, Laina-N voltage:
100V 265V RCD type AC and A/F, 190V 265V RCD type B/B+
Ka pinepine:
50/60Hz 5%
RCD tripping current (Molded case type RCD General)
ʻAno RCD
IN
Range IN [mA] Resolution [mA]
AC, A/F, B/B+
6mA,10mA
AC, A/F, B/B+ 30mA IN 300mA (0.2 1.1) IN
0.1 MA
AC, A/F 500mA IN 650mA
Accuracy IN – 0%, +10%IN
– 0%, +5%IN
RCD Molded type tripping time range [ms] (TT/TN system)
x1/2
x 1
x 2
x 5
AUTO
GS
GS
GS
GS
GS
6mA 10mA 30mA
m
AC 999 999 999 999 999 999 160 210 A/F 999 999 999 999 999 999 160 210 B/B+ 999 999 999 999 999 999 AC 999 999 999 999 999 999 160 210 A/F 999 999 999 999 999 999 160 210 B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 160 210 A/F 999 999 999 999 999 999 160 210
50 150 50 150
50 150 50 150
50 150 50 150
B/B+ 999 999 999 999 999 999 AC 999 999 999 999 999 999 160 210 100mA A/F 999 999 999 999 999 999 160 210
50 150 50 150
B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 160 210 300mA A/F 999 999 999 999 999 999 160 210
B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 160 210
500mA 650mA
A / F
999 999 999 999 999 999 160 210
B/B+
50 150 50 150
50 150
AC 999 999 999 999 999 999 160 210 1000mA A/F 999 999 999 999 999 999
B/B+
Resolution: 1ms, Accuracy: (2.0rdg + 2dgt)
RCD Molded type tripping time range [ms] (IT system) (*)
GS
310 310 310 310 310 310
310 310 310 310 310 310 310 310 310 310 310
AUTO+ G S
x1/2
x 1
x 2
x 5
AUTO
GS
GS
GS
GS
GS
6mA AC 999 999 999 999 999 999 160 210
10mA A/F 999 999 999 999 999 999 160 210
30mA B/B+ 999 999
999 999
100mA 300mA
AC A/F B/B+
999 999 999
999 999 999
999 999
999 999 999
999 999 999
999 999
160 160
210 210
500mA 650mA
AC A/F B/B+
999 999
999 999
999 999
999 999
999 999
999 999
160 160
210 210
50 150 50 150
50 150 50 150
50 150
AC 999 999 1000mA A/F 999 999
B/B+
999 999 999 999
160 210
Resolution: 1ms, Accuracy: (2.0rdg + 2dgt) (*) Selection RCD type A/F and type B/B+ available only for Norway country
GS
310 310 310 310 310
AUTO+
GS
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
AIA MAKOU
MAKROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 3 of 6
Ho'āʻo ma ka honua hoʻokaʻulua hoʻopaneʻe RCDs (me RCDX10 mea kōkua koho)
RCD type: Rated tripping currents (IN):: Line-PE, Line-N voltage: Ka pinepine:
AC ( ), A/F ( ), B/B+( ) General (G), Selective (S) and Delayed ( ) 0.3A 10A (type AC, A/F) ; 0.3A 3.0A (type B/B+) 100V 265V RCD type AC and A/F, 190V 265V RCD type B/B+ 50/60Hz 5%
ʻO ka mea hoʻāʻo hoʻopaneʻe ka leakale honua i kēia manawa RCDs (RCD General)
ʻAno RCD
IN
Range IN [mA] Resolution [mA]
Accuracy IN
AC, A/F, B/B+ AC, A/F
300mA IN 1A 1.1A IN 10A
(0.3 1.1) IN
0.1 IN
– 0%, +5%IN
ʻO ka mea hoʻāʻo hoʻopaneʻe ka leaka honua RCD e hele i waho o ka manawa [ms] ( ʻōnaehana TT/TN)
x1/2
x 1
x 2
x 5
AUTO
0.3A
1.0A
1.1A
3.0A
3.1A
6.5A
6.6A
10.0A
GS
GS
GS
AC 999 999 999 999 999 999 200 250
A/F 999 999 999 999 999 999 200 250
B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 200 250 A/F 999 999 999 999 999 999 200 250 B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 200 250 A/F 999 999 999 999 999 999 200 250 B/B+
AC 999 999 999 999 999 999 200 250 A/F 999 999 999 999 999 999 B/B+
G S 50 150 50 150
50 150 50 150
50 150 50 150
GS
G S 310 310 310 310 310
310 310
Resolution: 1ms, Accuracy: (2.0rdg + 2dgt)
Earth leakage delay tester RCDs trip out time range [ms] (IT system) (*)
x1/2
x 1
x 2
x 5
GS
GS
GS
GS
0.3A
3.0A
AC A/F B/B+
999 999 999 999 999 999 200 250 999 999 999 999 999 999 200 250
50 150 50 150
3.1A
6.5A
AC A/F B/B+
999 999 999 999 999 999 200 250 999 999 999 999 999 999 200 250
50 150 50 150
6.6A
10.0A
AC A/F B/B+
999 999 999 999 999 999 200 250 999 999 999 999 999 999 200 250
Resolution: 1ms, Accuracy: (2.0rdg + 2dgt) (*) Selection RCD type A/F and type B/B+ available only for Norway country
AUTO G S
G S 310
310
NoTripTest Non-trip earth loop impedance
Hōʻike voltage:
100265V (Line-PE), 50/60Hz 5%
NoTripTest Systems with Neutral wire
Range []
Resolution []
Pono (*)
0.01 9.99
0.01
(5 reading + N/10)
10.0 199.9
0.1
(5 reading + N)
200 1999
1
(5 reading + 3N)
(*) If IN <30mA, test current = IN/2 and N[]=30/IN; if IN 30mA, test current <15mA and N=1
NoTripTest Systems without Neutral wire
Range []
Resolution []
Pono (*)
1 1999
1
-0%, +(5.0 lettura +N)
(*) if IN <30mA, test current = IN/2 and N[]=(10×30)/IN ; If IN 30mA, test current IN/2 and N[]=(3×30)/IN
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
AIA MAKOU
MAKROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 4 of 6
Hoʻokaʻaʻike voltage (RCD a me NoTripTest)
Launa [V]
Hoʻoholo [V]
0 Utlim
0.1
Hoʻokaʻaʻike voltage (EARTH test TT system)
Launa [V]
Hoʻoholo [V]
0 99.9
0.1
Hoʻokaʻaʻike voltage (EARTH test TN system)
Launa [V]
Hoʻoholo [V]
0 99.9
0.1
100 999
1
Kūleʻa honua me ke ʻano 3-wire
Range []
Resolution []
0.01 9.99
0.01
10.0 99.9
0.1
100 999
1
1.00k 49.99k
0.01k
Hoʻāʻo i kēia manawa:
<10mA 77.5Hz, Open-circuit voltage: < 20Vrms
(*) Hoʻohui i ka 5% i ka pololei inā kū ka ʻimi noiʻi (Rs a i ʻole Rh) > 100 x Rmeas
Accuracy -0%, +(5.0 rdg + 3V)
Accuracy -0%, +(5.0 rdg + 3V)
Accuracy -0%, +(5.0 rdg + 3V)
Pono (*)
(5.0 rdg + 3dgt)
Ka pale ʻana o ka lepo me ke ʻano Wenner 4-wire
Launa [m]
Resolution [m]
0.06 9.99
0.01
10.0 99.9
0.1
100 999
1
1.00k 9.99k
0.01k
10.0k 99.9k
0.1k
100k 999k
1k
1.00M 3.14M
0.01M
(*) with distance d=10m, Distance “d” range:
1 10m
Hoʻāʻo i kēia manawa:
<10mA 77.5Hz, Open-circuit voltage: < 20Vrms
Accuracy (*) (5.0 rdg + 3dgt)
ʻO ka hoʻololi ʻana o ke kaʻina hana me ke ala 1-wire
Voltage laula PN, P-PE[V]
Laulā pinepine
100 265
50Hz/60Hz 5%
Hoʻokō wale ʻia ke ana ʻana ma ka hoʻopili pololei ʻana me nā ʻāpana ola metala (ʻaʻole ma ka sheath insulation)
Voltage drop on main power lines (V%)
Laulā (%)
Hoʻoholo (%)
0 100
0.1
Accuracy (10.0 rdg + 4dgt)
Leakage o kēia manawa (e HT96U koho clamp transducer)
Launa [mA]
Hoʻoholo [mA]
0.5 999.9
0.1
Accuracy (5.0 rdg + 2dgt)
Nā ʻāpana kaiapuni (hana AUX)
ʻĀpana
Kaulana
Mahana [°C]
-20°C 80°C
Mahana [°F]
-4°F 176°F
ʻAno haʻahaʻa pili [%HR]
0 100%HR
ʻO DC puka voltage
0.1mV 1.0V
0.001Lux 20.00 Lux (*)
Mālamalama [Lux]
0.1 Lux 2000 Lux (*)
1 Lux 20 kLux (*)
(*) ʻO ka pololei o ka HT53 lux probe e like me ka Class AA
Resolution 0.1 °C 0.1 °F
0.1% UR 0.1mV
0.001 0.02 Lux 0.1 2 Lux 1 20 Lux
Accuracy (2.0rdg+2dgt)
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
AIA MAKOU
MAKROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 5 of 6
Ana o na palena nui a me na harmonics (PQA)
AC TRMS Voltage
Range [V] 15.0 459.9
Allowed crest factor
Resolution [V] 0.1V
1,5 ; Frequency: 42.5 69.0 Hz
Accuracy (1.0rdg + 1dgt)
Ka pinepine
Launa [Hz]
Hoʻoholo [Hz]
42.5 69.0
0.01
ʻAe ʻia voltage: 15.0 459.9V ; Allowed current: 5%FS clamp FS clamp
Accuracy (2.0rdg + 2dgt)
AC TRMS i kēia manawa
FS clamp
Launa [A]
10A
5% FS 9.99
10A FS 200
5% FS 199.9
200A FS 3000
5% FS 2999
Range: 5 999.9 mV; Values under 5mV are zeroed
Allowed crest factor
3; Frequency: 42.5 69.0 Hz
Resolution [A] 0.01 0.1 1
Ka pololei
1Ph: (1.0rdg + 3 dgt) 3Ph: (2.0rdg + 5 dgt)
Active power (@ 230V in 1Ph systems, 400V in 3Ph systems, cos=1, f=50.0Hz)
FS clamp
Kaulana [kW]
Hoʻoholo [kW]
Ka pololei
10A
0.000 9.999
0.001
10A FS 200
0.00 999.99
0.01
1Ph: (2.0rdg + 5 dgt)
200A FS 1000
0.0 999.9
0.1
3Ph: (2.5rdg + 8 dgt)
1000A FS 3000
0 9999
1
Reactive power (@ 230V in 1Ph systems, 400V in 3Ph systems, cos=0, f=50.0Hz)
FS clamp
Laulā [kVAr]
Hoʻoholo [kVAr]
Ka pololei
10A
0.000 9.999
0.001
10A FS 200
0.00 999.99
0.01
1Ph: (2.0rdg + 7 dgt)
200A FS 1000
0.0 999.9
0.1
3Ph: (3.0rdg + 8 dgt)
1000A FS 3000
0 9999
1
Mea mana (@ 230V i nā ʻōnaehana 1Ph, 400V i nā ʻōnaehana 3Ph, f=50.0Hz)
Kaulana
Olelo Hooholo
Ka pololei
0.70c 1.00 0.70i
0.01
(4.0rdg + 10dgt) if I 10%FS (2.0rdg + 3dgt) if I > 10%FS
cos (@ 230V in 1Ph systems, 400V in 3Ph systems, f=50.0Hz)
Kaulana
Olelo Hooholo
Ka pololei
0.70c 1.00 0.70i
0.01
(4.0rdg + 10dgt) if I 10%FS (1.0rdg + 7dgt) if I > 10%FS
Voltage harmonics (@ 230V i nā ʻōnaehana 1Ph, 400V i nā ʻōnaehana 3Ph, f=50.0Hz)
Laulā [%]
Hoʻoholo [%]
Kauoha
Ka pololei
0.1 100.0
0.1
01 25
(5.0rdg + 5dgt)
Frequency of fundamental: 42.5 69.0 Hz, DC accuracy not declared
ʻO nā harmonika o kēia manawa (f=50Hz)
Laulā [%]
Hoʻoholo [%]
0.1 100.0
0.1
Kauoha 01 9 10 17 18 25
Accuracy (5.0rdg + 5dgt) (10.0rdg + 5dgt) (15.0rdg + 10dgt)
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
AIA MAKOU
MAKROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 6 of 6
2. NĀ HOPE
DISPLAY AND MEMORY: Features: Memory: Communication:
Touch screen, color graphic LCD, 320x240mm 999 locations, 3 marker levels Optical-USB and built-in WiFi
POWER SUPPLY: Batteries: Battery life: Auto Power OFF:
6 x 1.2V(rechargeable) type AA or 6 x 1.5V type AA > 500 test for each function after 5 min of idleness (disabled)
MECHANICAL FEATURES: Dimensions (L x W x H): Weight (included batteries):
WORKING ENVIRONMENTAL CONDITIONS: Reference temperature: Working temperature: Allowed relative humidity: Storage temperature: Storage humidity:
TEST VERIFIES REFERENCE STANDARDS: Continuity test with 200mA: Insulation resistance: Earth resistance: Fault loop impedance: RCD test: Multifunction: Prospective short circuit current: Earth resistance on TN systems:
225 x 165 x 75mm 1.2kg
23°C 5°C 0°C 40°C <80%RH -10°C 60°C <80%RH
IEC/EN61557-4 IEC/EN61557-2 IEC/EN61557-5 IEC/EN61557-3 IEC/EN61557-6 IEC/EN61557-10 EN60909-0 EN61936-1 + EN50522
GENERAL REFERENCE STANDARDS: Safety of measuring instruments: Product type standard: Technical documentation : Insulation: Pollution degree: Encapsulation :
Hoʻokahulitage category: Max height of use:
IEC/EN61010-1, IEC/EN61010-031, IEC/EN61010-2-032 IEC/EN61557-1 IEC/EN61187 double insulation 2 IP40
CAT IV 300V (to ground), max 415V between inputs 2000m
Hoʻopiha kēia mea hana i nā koi o Low Voltage Directive 2014/35/EU (LVD), EMC Directive 2014/35/EU and Directive RED 2014/53/EU
Hoʻokō kēia mea hana i nā koi o ka European Directive 2011/65/EU (RoHS) a me 2012/19/EU (WEEE)
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
AIA MAKOU
Diensten van EURO-INDEX
He mea kūʻai aku ʻo EURO-INDEX, hoʻopuka a hoʻolaha i nā ʻano like ʻole A-merken op het gebied van test- en meetinstrumenten. Daarnaast leveren wij een groot aantal diensten om het gebruik van deze instrumenten in uw bedrijfsvoering te optimaliseren. Hiki iā ʻoe ke hoʻihoʻi i nā mea hoʻohana, hoʻihoʻi ʻia nā mea hoʻohana, maar ook kennisdeling ma o EURO-INDEX Academy a me nā mea hoʻohana.
ʻO Geautoriseerd Service Centrum EURO-INDEX bv he mea kūʻai aku ia ma Geautoriseerd Service Centrum. Hiki iā ʻoe ke hoʻohana i nā ʻōlelo aʻoaʻo e pili ana i ka ʻenehana puka puka e hoʻopau i ka puka o ka mea hana a me ka loaʻa ʻana o ka pono o ka gereedschappen en software. Er worden uitsluitend originele onderdelen toegepast en de garantie van uw instrument, evenals de certificering (ATEX, EN50379, etc.) blijven intact.
Kalibratielaboratorium
Ons moderne service- en kalibratielaboratorium beschikt over een
RvA accreditatie ma ka NEN-EN-ISO/IEC 17025.
geldt voor grootheden, zoals gespecificeerd in de scope bij accreditatienummer K105.
ʻIke nui
Kijk voor een overzicht van al onze diensten op euro-index.nl/diensten
ʻOihana Mobile
Naast de vaste kalibratielaboratoria in Capelle aan den IJssel
en Zaventem beschikken wij ook over laboratoria op wielen met
ʻO ka inoa ʻo “Mobiele Service”. Dit biedt vertrowde
service en kwaliteit, bij u voor de deur!
ʻIke nui
KWS®
ʻO KWS® kahi ʻōnaehana lawelawe ʻē aʻe no kāu hui ʻana i nā mea kani
met periodiek onderhoud en kalibratie tegen vaste, lage kosten.
Uw kalibratiecertificaten zijn digitaal beschikbaar via Mijn KWS (gratis webportaal en app).
ʻIke nui
Verhuur van meetinstrument
Uitgebreid assortiment
Nauwkeurigheid aantoonbaar door actueel kalibratiecertificaat
Deskundig advies Complete levering inclusief accessoires
ʻIke nui
EURO-INDEX Academy Trainingen (individueel en klassikaal) Cursussen en workshops Demonstratie- en instructievideo’s Whitepapers
ʻIke nui
Servicebalie
Onderhoud, reparatie en kalibratie
ʻO Cursussen ma nā hale hana
ʻOihana Mobile
E hoʻohana i ka EURO-INDEX® NL 24005
Palapala / Punawai
 |
HT INSTRUMENTS MACROTESTG3 Multifunction Multi Tester [pdf] Na kuhikuhi MACROTESTG3 Multifunction Multi Tester, MACROTESTG3, Multifunction Multi Tester, Multi Tester |