HT INSTRUMENTS MACROTESTG3 Multifunction Multi Tester
Specifikacije
- Otvoreno kolo voltage: 4V do 12V
- Otpor izolacije (DC voltage):
- Test voltage [V]
- Raspon [M]
- Rezolucija [M]
- Preciznost
- Maksimalna ispitna struja: 5.81A (at 265V); 10.10A (at 457V)
- Test voltage rasponi: 100-265V (Line-Neutral) / 100-460V (Line-Line); 50/60Hz ±5%
- Sigurnosna zaštita: Z linija (Linija-Linija, Linija-Neutralna, Linija-PE)
- Izolacijski materijali: PVC, Rubber butyl, EPR, XLPE
- First fault current (IT systems):
- Raspon (mA)
- Rezolucija (mA)
- Ograničiti kontakt voltage (ULIM): 25V, 50V
Electrical Safety Testing
- Connect the safety tester according to the specified voltage range.
- Select the appropriate insulation resistance test voltage.
- Measure the insulation resistance and ensure it falls within the specified accuracy range.
- Check the maximum test current and ensure it is within the safe limits for testing.
- Perform first fault current tests as required.
RCD testiranje
- Select the RCD type and rated tripping currents for testing.
- Set the Line-PE and Line-N voltage prema specifikacijama.
- Perform RCD Molded type tripping time range tests based on the specific RCD type and current settings.
“`
Otvoreno kolo voltage: Short circuit current: Nominal test current: Safety protection:
nominal test voltage 0% +10% <6.0mA at 500V test voltage
>1mA if load= 1k*Vnom (Vnom=50V, 100V, 250V, 500V, 1000V) the display shows an error message for input voltage> 10V
Z linija (Linija-Linija, Linija-Neutralna, Linija-PE)
Raspon []
Rezolucija []
Preciznost
0.00 199.9 m (*) 200 1999 m (*)
0.1 m (*) 1 m (*)
(5.0 rdg + 1m) (*)
0.01 9.99 10.0 199.9
0.01 0.1
(5.0 rdg + 3dgt)
(*) By means of IMP57 optional accessory
Maksimalna ispitna struja
5.81A (at 265V); 10.10A (at 457V)
Test voltage ranges: Protection type: Insulation materials:
100265V (Line-Neutral) / 100460V (Line-Line); 50/60Hz 5% MCB (B, C, D, K), Fuse (gG, aM) PVC, Rubber butyl, EPR, XLPE
Prva struja kratkog spoja (IT sistemi)
Raspon (mA)
Rezolucija (mA)
0.1 0.9
0.1
1 999
1
Ograničiti kontakt voltage (ULIM)
25V, 50V
Accuracy (5.0 rdg + 1dgt) (5.0 rdg + 3dgt)
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
GDJE SMO
MACROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 2 of 6
RCD test (tip lijevanog kućišta)
RCD type:
AC ( ), A/F ( ), B/B+( ) General (G), Selective (S) and Delayed ( )
Rated tripping currents (IN)::
6mA, 10mA, 30mA, 100mA, 300mA, 500mA, 650mA, 1000mA
Linija-PE, Linija-N voltage:
100V 265V RCD type AC and A/F, 190V 265V RCD type B/B+
Učestalost:
50/60Hz 5%
RCD tripping current (Molded case type RCD General)
RCD tip
IN
Range IN [mA] Resolution [mA]
AC, A/F, B/B+
6mA,10mA
AC, A/F, B/B+ 30mA IN 300mA (0.2 1.1) IN
0.1 IN
AC, A/F 500mA IN 650mA
Accuracy IN – 0%, +10%IN
– 0%, +5%IN
RCD Molded type tripping time range [ms] (TT/TN system)
x 1/2
x 1
x 2
x 5
AUTO
GS
GS
GS
GS
GS
6mA 10mA 30mA
m
AC 999 999 999 999 999 999 160 210 A/F 999 999 999 999 999 999 160 210 B/B+ 999 999 999 999 999 999 AC 999 999 999 999 999 999 160 210 A/F 999 999 999 999 999 999 160 210 B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 160 210 A/F 999 999 999 999 999 999 160 210
50 150 50 150
50 150 50 150
50 150 50 150
B/B+ 999 999 999 999 999 999 AC 999 999 999 999 999 999 160 210 100mA A/F 999 999 999 999 999 999 160 210
50 150 50 150
B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 160 210 300mA A/F 999 999 999 999 999 999 160 210
B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 160 210
500mA 650mA
A / F
999 999 999 999 999 999 160 210
B/B+
50 150 50 150
50 150
AC 999 999 999 999 999 999 160 210 1000mA A/F 999 999 999 999 999 999
B/B+
Resolution: 1ms, Accuracy: (2.0rdg + 2dgt)
RCD Molded type tripping time range [ms] (IT system) (*)
GS
310 310 310 310 310 310
310 310 310 310 310 310 310 310 310 310 310
AUTO+ G S
x 1/2
x 1
x 2
x 5
AUTO
GS
GS
GS
GS
GS
6mA AC 999 999 999 999 999 999 160 210
10mA A/F 999 999 999 999 999 999 160 210
30mA B/B+ 999 999
999 999
100mA 300mA
AC A/F B/B+
999 999 999
999 999 999
999 999
999 999 999
999 999 999
999 999
160 160
210 210
500mA 650mA
AC A/F B/B+
999 999
999 999
999 999
999 999
999 999
999 999
160 160
210 210
50 150 50 150
50 150 50 150
50 150
AC 999 999 1000mA A/F 999 999
B/B+
999 999 999 999
160 210
Resolution: 1ms, Accuracy: (2.0rdg + 2dgt) (*) Selection RCD type A/F and type B/B+ available only for Norway country
GS
310 310 310 310 310
AUTO+
GS
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
GDJE SMO
MACROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 3 of 6
Ispitivanje RCD-ova na testeru kašnjenja strujnog propuštanja (s opcionalnim priborom RCDX10)
RCD type: Rated tripping currents (IN):: Line-PE, Line-N voltage: Učestalost:
AC ( ), A/F ( ), B/B+( ) General (G), Selective (S) and Delayed ( ) 0.3A 10A (type AC, A/F) ; 0.3A 3.0A (type B/B+) 100V 265V RCD type AC and A/F, 190V 265V RCD type B/B+ 50/60Hz 5%
Tester kašnjenja struje isključenja RCD-ova (RCD General)
RCD tip
IN
Range IN [mA] Resolution [mA]
Accuracy IN
AC, A/F, B/B+ AC, A/F
300mA IN 1A 1.1A IN 10A
(0.3 1.1) IN
0.1IN
– 0%, +5%IN
Vremenski raspon isključenja ispitivača strujnog propusta kod zaštitne sklopke diferencijalne struje [ms] (TT/TN sistem)
x 1/2
x 1
x 2
x 5
AUTO
0.3A
1.0A
1.1A
3.0A
3.1A
6.5A
6.6A
10.0A
GS
GS
GS
AC 999 999 999 999 999 999 200 250
A/F 999 999 999 999 999 999 200 250
B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 200 250 A/F 999 999 999 999 999 999 200 250 B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 200 250 A/F 999 999 999 999 999 999 200 250 B/B+
AC 999 999 999 999 999 999 200 250 A/F 999 999 999 999 999 999 B/B+
G S 50 150 50 150
50 150 50 150
50 150 50 150
GS
G S 310 310 310 310 310
310 310
Resolution: 1ms, Accuracy: (2.0rdg + 2dgt)
Earth leakage delay tester RCDs trip out time range [ms] (IT system) (*)
x 1/2
x 1
x 2
x 5
GS
GS
GS
GS
0.3A
3.0A
AC A/F B/B+
999 999 999 999 999 999 200 250 999 999 999 999 999 999 200 250
50 150 50 150
3.1A
6.5A
AC A/F B/B+
999 999 999 999 999 999 200 250 999 999 999 999 999 999 200 250
50 150 50 150
6.6A
10.0A
AC A/F B/B+
999 999 999 999 999 999 200 250 999 999 999 999 999 999 200 250
Resolution: 1ms, Accuracy: (2.0rdg + 2dgt) (*) Selection RCD type A/F and type B/B+ available only for Norway country
AUTO G S
G S 310
310
NoTripTest Non-trip earth loop impedance
Test voltage:
100265V (Line-PE), 50/60Hz 5%
NoTripTest Systems with Neutral wire
Raspon []
Rezolucija []
tačnost (*)
0.01 9.99
0.01
(5 reading + N/10)
10.0 199.9
0.1
(5 reading + N)
200 1999
1
(5 reading + 3N)
(*) If IN <30mA, test current = IN/2 and N[]=30/IN; if IN 30mA, test current <15mA and N=1
NoTripTest Systems without Neutral wire
Raspon []
Rezolucija []
tačnost (*)
1 1999
1
-0%, +(5.0 lettura +N)
(*) if IN <30mA, test current = IN/2 and N[]=(10×30)/IN ; If IN 30mA, test current IN/2 and N[]=(3×30)/IN
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
GDJE SMO
MACROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 4 of 6
Kontakt voltage (RCD i NoTripTest)
Raspon [V]
Rezolucija [V]
0 Utlim
0.1
Kontakt voltage (EARTH test TT system)
Raspon [V]
Rezolucija [V]
0 99.9
0.1
Kontakt voltage (EARTH test TN system)
Raspon [V]
Rezolucija [V]
0 99.9
0.1
100 999
1
Otpor uzemljenja kod 3-žične metode
Raspon []
Rezolucija []
0.01 9.99
0.01
10.0 99.9
0.1
100 999
1
1.00k 49.99k
0.01k
Test struja:
<10mA 77.5Hz, Open-circuit voltage: < 20Vrms
(*) Dodajte 5% tačnosti ako su otpori sonde (Rs ili Rh) > 100 x Rmeas
Accuracy -0%, +(5.0 rdg + 3V)
Accuracy -0%, +(5.0 rdg + 3V)
Accuracy -0%, +(5.0 rdg + 3V)
tačnost (*)
(5.0 rdg + 3dgt)
Otpornost tla Wennerovom metodom sa 4 žice
Domet [m]
Resolution [m]
0.06 9.99
0.01
10.0 99.9
0.1
100 999
1
1.00k 9.99k
0.01k
10.0k 99.9k
0.1k
100k 999k
1k
1.00M 3.14M
0.01M
(*) with distance d=10m, Distance “d” range:
1 10m
Test struja:
<10mA 77.5Hz, Open-circuit voltage: < 20Vrms
Accuracy (*) (5.0 rdg + 3dgt)
Rotacija faznog redoslijeda s 1-žičnom metodom
VoltagRaspon PN, P-PE[V]
Frekvencijski opseg
100 265
50Hz/60Hz 5%
Mjerenje se vrši samo direktnim kontaktom s metalnim dijelovima pod naponom (ne na izolacijskom omotaču)
Voltage drop on main power lines (V%)
Raspon (%)
Rezolucija (%)
0 100
0.1
Accuracy (10.0 rdg + 4dgt)
Struja curenja (po HT96U opcionalnom klamp pretvarač)
Raspon [mA]
Rezolucija [mA]
0.5 999.9
0.1
Accuracy (5.0 rdg + 2dgt)
Parametri okoline (AUX funkcija)
Parametar
Domet
temperatura [°C]
-20°C 80°C
temperatura [°F]
-4°F 176°F
Relativna vlažnost [%HR]
0 100%HR
DC izlaz voltage
0.1mV 1.0V
0.001Lux 20.00 Lux (*)
Osvjetljenje [Lux]
0.1 Lux 2000 Lux (*)
1 Lux 20 kLux (*)
(*) Tačnost HT53 luks sonde je u skladu sa klasom AA
Resolution 0.1 °C 0.1 °F
0.1% UR 0.1mV
0.001 0.02 Lux 0.1 2 Lux 1 20 Lux
Accuracy (2.0rdg+2dgt)
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
GDJE SMO
MACROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 5 of 6
Mjerenje glavnih parametara i harmonika (PQA)
AC TRMS Voltage
Range [V] 15.0 459.9
Allowed crest factor
Resolution [V] 0.1V
1,5 ; Frequency: 42.5 69.0 Hz
Tačnost (1.0 poen + 1 poena)
Frekvencija
Raspon [Hz]
Rezolucija [Hz]
42.5 69.0
0.01
Dozvoljeno voltage: 15.0 459.9V ; Allowed current: 5%FS clamp FS clamp
Tačnost (2.0 poen + 2 poena)
AC TRMS struja
FS clamp
Raspon [A]
10A
5% FS 9.99
10A FS 200
5% FS 199.9
200A FS 3000
5% FS 2999
Range: 5 999.9 mV; Values under 5mV are zeroed
Allowed crest factor
3; Frequency: 42.5 69.0 Hz
Rezolucija [A] 0.01 0.1 1
Preciznost
1Ph: (1.0rdg + 3 dgt) 3Ph: (2.0rdg + 5 dgt)
Active power (@ 230V in 1Ph systems, 400V in 3Ph systems, cos=1, f=50.0Hz)
FS clamp
Raspon [kW]
Rezolucija [kW]
Preciznost
10A
0.000 9.999
0.001
10A FS 200
0.00 999.99
0.01
1Ph: (2.0rdg + 5 dgt)
200A FS 1000
0.0 999.9
0.1
3Ph: (2.5rdg + 8 dgt)
1000A FS 3000
0 9999
1
Reactive power (@ 230V in 1Ph systems, 400V in 3Ph systems, cos=0, f=50.0Hz)
FS clamp
Raspon [kVAr]
Rezolucija [kVAr]
Preciznost
10A
0.000 9.999
0.001
10A FS 200
0.00 999.99
0.01
1Ph: (2.0rdg + 7 dgt)
200A FS 1000
0.0 999.9
0.1
3Ph: (3.0rdg + 8 dgt)
1000A FS 3000
0 9999
1
Faktor snage (@ 230V u 1-faznim sistemima, 400V u 3-faznim sistemima, f=50.0Hz)
Domet
Rezolucija
Preciznost
0.70c 1.00 0.70i
0.01
(4.0rdg + 10dgt) if I 10%FS (2.0rdg + 3dgt) if I > 10%FS
cos (@ 230V in 1Ph systems, 400V in 3Ph systems, f=50.0Hz)
Domet
Rezolucija
Preciznost
0.70c 1.00 0.70i
0.01
(4.0rdg + 10dgt) if I 10%FS (1.0rdg + 7dgt) if I > 10%FS
Voltage harmonici (@ 230V u 1-faznim sistemima, 400V u 3-faznim sistemima, f=50.0Hz)
Raspon [%]
Rezolucija [%]
Red
Preciznost
0.1 100.0
0.1
01 25
(5.0rdg + 5dgt)
Frequency of fundamental: 42.5 69.0 Hz, DC accuracy not declared
Strujni harmonici (f=50Hz)
Raspon [%]
Rezolucija [%]
0.1 100.0
0.1
Naručite 01 9 10 17 18 25
Accuracy (5.0rdg + 5dgt) (10.0rdg + 5dgt) (15.0rdg + 10dgt)
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
GDJE SMO
MACROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 6 of 6
2. OPŠTE SPECIFIKACIJE
DISPLAY AND MEMORY: Features: Memory: Communication:
Touch screen, color graphic LCD, 320x240mm 999 locations, 3 marker levels Optical-USB and built-in WiFi
POWER SUPPLY: Batteries: Battery life: Auto Power OFF:
6 x 1.2V(rechargeable) type AA or 6 x 1.5V type AA > 500 test for each function after 5 min of idleness (disabled)
MECHANICAL FEATURES: Dimensions (L x W x H): Weight (included batteries):
WORKING ENVIRONMENTAL CONDITIONS: Reference temperature: Working temperature: Allowed relative humidity: Storage temperature: Storage humidity:
TEST VERIFIES REFERENCE STANDARDS: Continuity test with 200mA: Insulation resistance: Earth resistance: Fault loop impedance: RCD test: Multifunction: Prospective short circuit current: Earth resistance on TN systems:
225 x 165 x 75 mm 1.2 kg
23°C 5°C 0°C 40°C <80%RH -10°C 60°C <80%RH
IEC/EN61557-4 IEC/EN61557-2 IEC/EN61557-5 IEC/EN61557-3 IEC/EN61557-6 IEC/EN61557-10 EN60909-0 EN61936-1 + EN50522
GENERAL REFERENCE STANDARDS: Safety of measuring instruments: Product type standard: Technical documentation : Insulation: Pollution degree: Encapsulation :
Overvoltage category: Max height of use:
IEC/EN61010-1, IEC/EN61010-031, IEC/EN61010-2-032 IEC/EN61557-1 IEC/EN61187 double insulation 2 IP40
CAT IV 300V (to ground), max 415V between inputs 2000m
Ovaj instrument zadovoljava zahtjeve Low Voltage Directive 2014/35/EU (LVD), EMC Directive 2014/35/EU and Directive RED 2014/53/EU
Ovaj instrument zadovoljava zahtjeve Evropske direktive 2011/65/EU (RoHS) i 2012/19/EU (WEEE)
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
GDJE SMO
Diensten van EURO-INDEX
EURO-INDEX je proizvođač, uvoznik i distributer različitih A-merkena koji se koriste za testiranje i sastanke instrumenata. Daarnaast leveren wij een groot aantal diensten om het gebruik van deze instrumenten in uw bedrijfsvoering te optimaliseren. Dit omvat uiteraard onderhoud, reparatie and kalibratie van de instrumente, maar ook kennisdeling preko EURO-INDEX Academy i verhuur van instrumenten.
Servisni centar za upravljanje EURO-INDEX bv je sve vertegenwoordigde merken een Geautoriseerd Service Centrum. Dit betekent dat uw instrumenten worden behandeld door technici die zijn opgeleid door de fabrikant en beschikken over de juiste gereedschappen en software. Upotrebljava se originalna stavka i garancija za sve instrumente, čak i za certifikaciju (ATEX, EN50379, itd.) netaknuta.
Kalibratielaboratorium
Ons moderne service- en kalibratielaboratorium beschikt over een
RvA akreditacija prema NEN-EN-ISO/IEC 17025. Ova akreditacija
geldt voor grootheden, zoals gespecificeerd in de scope bij accreditatienummer K105.
Više informacija
Kijk voor een overzicht van al onze diensten op euro-index.nl/diensten
Mobile Service
Naast de vaste kalibratielaboratoria in Capelle aan den IJssel
en Zaventem beschikken wij ook over laboratoria op wielen met
od imena “Mobiele Service”. Dit biedt vertrouwde
service en kwaliteit, bij u voor de deur!
Više informacija
KWS®
KWS® je jedinstveni sistem usluga za naše instrumente za sastanke
met periodiek onderhoud en kalibratie tegen vaste, lage kosten.
Uw kalibratiecertificate zijn digital beschikbaar via Mijn KWS (besplatno webportal i aplikacija).
Više informacija
Verhuur van meetinstrumenten
Uitgebreid asortiman
Nauwkeurigheid aantoonbaar door actueel kalibratiecertificat
Deskundig advies Complete levering inclusief accessoires
Više informacija
EURO-INDEX Academy Trainingen (individueel en klassikaal) Cursussen en workshops Demonstratie- en instructievideo’s Whitepapers
Više informacija
Servicebalie
Onderhoud, reparatie en kalibratie
Cursussen en workshops
Mobile Service
Wijzigingen voorbehouden EURO-INDEX® NL 24005
Dokumenti / Resursi
 |
HT INSTRUMENTS MACROTESTG3 Multifunction Multi Tester [pdfUpute MACROTESTG3 Multifunction Multi Tester, MACROTESTG3, Multifunction Multi Tester, Multi Tester |