HT INSTRUMENTS MACROTESTG3 Multifunction Multi Tester

ຂໍ້ມູນຈໍາເພາະ

• ວົງຈອນເປີດ voltage: 4V ຫາ 12V
• ຄວາມຕ້ານທານຂອງ insulation (DC voltage):
  • ສະບັບທົດສອບtage [V]
  • ໄລຍະ [M]
  • ຄວາມລະອຽດ [M]
  • ຄວາມຖືກຕ້ອງ
• ປະຈຸບັນການທົດສອບສູງສຸດ: 5.81A (at 265V); 10.10A (at 457V)
• ສະບັບທົດສອບtage ranges: 100-265V (Line-Neutral) / 100-460V (Line-Line); 50/60Hz ±5%
• ການປົກປ້ອງຄວາມປອດໄພ: ເສັ້ນ Z (ເສັ້ນ-ເສັ້ນ, ເສັ້ນ-ກາງ, ເສັ້ນ-PE)
• ວັດສະດຸ insulation: PVC, Rubber butyl, EPR, XLPE
• First fault current (IT systems):
  • ໄລຍະ (mA)
  • ຄວາມລະອຽດ (mA)
• ຈໍາ​ກັດ​ການ​ຕິດ​ຕໍ່ voltage (ULIM): 25V, 50V

Electrical Safety Testing

1. Connect the safety tester according to the specified voltage ຊ່ວງ.
2. Select the appropriate insulation resistance test voltage.
3. Measure the insulation resistance and ensure it falls within the specified accuracy range.
4. Check the maximum test current and ensure it is within the safe limits for testing.
5. Perform first fault current tests as required.

ການທົດສອບ RCD

1. Select the RCD type and rated tripping currents for testing.
2. Set the Line-PE and Line-N voltage ອີງຕາມການສະເພາະ.
3. Perform RCD Molded type tripping time range tests based on the specific RCD type and current settings.

“`

ວົງຈອນເປີດ voltage: Short circuit current: Nominal test current: Safety protection:

nominal test voltage ­0% +10% <6.0mA at 500V test voltage

>1mA if load= 1k*Vnom (Vnom=50V, 100V, 250V, 500V, 1000V) the display shows an error message for input voltage >10V

ເສັ້ນ Z (ເສັ້ນ-ເສັ້ນ, ເສັ້ນ-ກາງ, ເສັ້ນ-PE)

ຊ່ວງ []

ຄວາມລະອຽດ []

ຄວາມຖືກຕ້ອງ

0.00 199.9 m (*) 200 1999 m (*)

0.1 m (*) 1 m (*)

(5.0 rdg + 1m) (*)

0.01 9.99 10.0 199.9

0.01 0.1

(5.0 rdg + 3dgt)

(*) By means of IMP57 optional accessory

ປະຈຸບັນການທົດສອບສູງສຸດ

5.81A (at 265V); 10.10A (at 457V)

ສະບັບທົດສອບtage ranges: Protection type: Insulation materials:

100265V (Line-Neutral) / 100460V (Line-Line); 50/60Hz 5% MCB (B, C, D, K), Fuse (gG, aM) PVC, Rubber butyl, EPR, XLPE

ຄວາມ​ຜິດ​ພາດ​ປັດ​ຈຸ​ບັນ​ທໍາ​ອິດ (ລະ​ບົບ IT​)

ໄລຍະ (mA)

ຄວາມລະອຽດ (mA)

0.1 0.9

0.1

1 999

1

ຈໍາ​ກັດ​ການ​ຕິດ​ຕໍ່ voltage (ULIM) 

25V, 50V

Accuracy (5.0 rdg + 1dgt) (5.0 rdg + 3dgt)

HT ITALIA SRL Via della Boaria, 40 48018 ­ Faenza (RA) ­ Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com

ພວກເຮົາຢູ່ໃສ

MACROTESTG3
Professional installation safety tester

Rel 2.02 of 26/05/25 Pag 2 of 6

ການທົດສອບ RCD (ປະເພດກໍລະນີ molded)

RCD type:

AC ( ), A/F ( ), B/B+( ) ­ General (G), Selective (S) and Delayed ( )

Rated tripping currents (IN)::

6mA, 10mA, 30mA, 100mA, 300mA, 500mA, 650mA, 1000mA

Line-PE, Line-N voltage:

100V 265V RCD type AC and A/F, 190V 265V RCD type B/B+

ຄວາມຖີ່:

50/60Hz 5%

RCD tripping current (Molded case type ­ RCD General)

ປະເພດ RCD

IN

Range IN [mA] Resolution [mA]

AC, A/F, B/B+

6mA, 10mA

AC, A/F, B/B+ 30mA IN 300mA (0.2 1.1) IN

0.1 ນ

AC, A/F 500mA IN 650mA

Accuracy IN – 0%, +10%IN
– 0%, +5%IN

RCD Molded type tripping time range [ms] (TT/TN system)

x 1/2

x 1

x 2

x 5

ອັດຕະໂນມັດ

GS

GS

GS

GS

GS

6mA 10mA 30mA

m

AC 999 999 999 999 999 999 160 210 A/F 999 999 999 999 999 999 160 210 B/B+ 999 999 999 999 999 999 AC 999 999 999 999 999 999 160 210 A/F 999 999 999 999 999 999 160 210 B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 160 210 A/F 999 999 999 999 999 999 160 210

50 150 50 150
50 150 50 150
50 150 50 150

B/B+ 999 999 999 999 999 999 AC 999 999 999 999 999 999 160 210 100mA A/F 999 999 999 999 999 999 160 210

50 150 50 150

B/B+ 999 999 999 999 999 999

AC 999 999 999 999 999 999 160 210 300mA A/F 999 999 999 999 999 999 160 210
B/B+ 999 999 999 999 999 999

AC 999 999 999 999 999 999 160 210

500mA 650mA

ກ / F

999 999 999 999 999 999 160 210.

B/B+

50 150 50 150
50 150

AC 999 999 999 999 999 999 160 210 1000mA A/F 999 999 999 999 999 999
B/B+

Resolution: 1ms, Accuracy: (2.0rdg + 2dgt)

RCD Molded type tripping time range [ms] (IT system) (*)

GS
310 310 310 310 310 310
310 310 310 310 310 310 310 310 310 310

AUTO+ G S

x 1/2

x 1

x 2

x 5

ອັດຕະໂນມັດ

GS

GS

GS

GS

GS

6mA AC 999 999 999 999 999 999 160 210

10mA A/F 999 999 999 999 999 999 160 210

30mA B/B+ 999 999

999 999

100mA 300mA

AC A/F B/B+

999 999 999

999 999 999

999 999

999 999 999

999 999 999

999 999

160 160

210 210

500mA 650mA

AC A/F B/B+

999 999

999 999

999 999

999 999

999 999

999 999

160 160

210 210

50 150 50 150
50 150 50 150
50 150

AC 999 999 1000mA A/F 999 999
B/B+

999 999 999 999

160 210

Resolution: 1ms, Accuracy: (2.0rdg + 2dgt) (*) Selection RCD type A/F and type B/B+ available only for Norway country

GS
310 310 310 310 310

ອັດຕະໂນມັດ+
GS

HT ITALIA SRL Via della Boaria, 40 48018 ­ Faenza (RA) ­ Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com

ພວກເຮົາຢູ່ໃສ

MACROTESTG3
Professional installation safety tester

Rel 2.02 of 26/05/25 Pag 3 of 6

ທົດສອບ RCDs ເຄື່ອງທົດສອບຄວາມລ່າຊ້າຂອງໂລກຮົ່ວ (ມີອຸປະກອນເສີມທາງເລືອກ RCDX10)

RCD type: Rated tripping currents (IN):: Line-PE, Line-N voltage: ຄວາມຖີ່:

AC ( ), A/F ( ), B/B+( ) ­ General (G), Selective (S) and Delayed ( ) 0.3A 10A (type AC, A/F) ; 0.3A 3.0A (type B/B+) 100V 265V RCD type AC and A/F, 190V 265V RCD type B/B+ 50/60Hz 5%

ເຄື່ອງທົດສອບການຊັກຊ້າການຮົ່ວໄຫຼຂອງໂລກ RCDs tripping current (RCD ທົ່ວໄປ)

ປະເພດ RCD

IN

Range IN [mA] Resolution [mA]

Accuracy IN

AC, A/F, B/B+ AC, A/F

300mA IN 1A 1.1A IN 10A

(0.3 1.1) IN

0.1 ນິ້ວ

– 0%, +5%IN

ເຄື່ອງທົດສອບຄວາມລ່າຊ້າການຮົ່ວໄຫຼຂອງແຜ່ນດິນໂລກ RCDs ອອກເດີນທາງຊ່ວງເວລາ [ms] (ລະບົບ TT/TN)

x 1/2

x 1

x 2

x 5

ອັດຕະໂນມັດ

0.3A
1.0A
1.1A
3.0A
3.1A
6.5A
6.6A
10.0A

GS

GS

GS

AC 999 999 999 999 999 999 200 250
A/F 999 999 999 999 999 999 200 250
B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 200 250 A/F 999 999 999 999 999 999 200 250 B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 200 250 A/F 999 999 999 999 999 999 200 250 B/B+

AC 999 999 999 999 999 999 200 250 A/F 999 999 999 999 999 999 B/B+

G S 50 150 50 150
50 150 50 150
50 150 50 150

GS

G S 310 310 310 310 310
310 310

Resolution: 1ms, Accuracy: (2.0rdg + 2dgt)
Earth leakage delay tester RCDs trip out time range [ms] (IT system) (*)

x 1/2

x 1

x 2

x 5

GS

GS

GS

GS

0.3A
3.0A

AC A/F B/B+

999 999 999 999 999 999 200 250 999 999 999 999 999 999 200 250 XNUMX XNUMX XNUMX XNUMX XNUMX XNUMX XNUMX XNUMX

50 150 50 150

3.1A
6.5A

AC A/F B/B+

999 999 999 999 999 999 200 250 999 999 999 999 999 999 200 250 XNUMX XNUMX XNUMX XNUMX XNUMX XNUMX XNUMX XNUMX

50 150 50 150

6.6A
10.0A

AC A/F B/B+

999 999 999 999 999 999 200 250 999 999 999 999 999 999 200 250 XNUMX XNUMX XNUMX XNUMX XNUMX XNUMX XNUMX XNUMX

Resolution: 1ms, Accuracy: (2.0rdg + 2dgt) (*) Selection RCD type A/F and type B/B+ available only for Norway country

AUTO G S

G S 310
310

NoTripTest ­ Non-trip earth loop impedance

ສະບັບທົດສອບtage:

100265V (Line-PE), 50/60Hz 5%

NoTripTest ­ Systems with Neutral wire

ຊ່ວງ []

ຄວາມລະອຽດ []

ຄວາມຖືກຕ້ອງ (*)

0.01 9.99

0.01

(5 reading + N/10)

10.0 199.9

0.1

(5 reading + N)

200 1999

1

(5 reading + 3N)

(*) If IN <30mA, test current = IN/2 and N[]=30/IN; if IN 30mA, test current <15mA and N=1

NoTripTest ­ Systems without Neutral wire

ຊ່ວງ []

ຄວາມລະອຽດ []

ຄວາມຖືກຕ້ອງ (*)

1 1999

1

-0%, +(5.0 lettura +N)

(*) if IN <30mA, test current = IN/2 and N[]=(10×30)/IN ; If IN 30mA, test current IN/2 and N[]=(3×30)/IN

HT ITALIA SRL Via della Boaria, 40 48018 ­ Faenza (RA) ­ Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com

ພວກເຮົາຢູ່ໃສ

MACROTESTG3
Professional installation safety tester

Rel 2.02 of 26/05/25 Pag 4 of 6

ຕິດຕໍ່ voltage (RCD ແລະ NoTripTest)

ຊ່ວງ [V]

ຄວາມລະອຽດ [V]

0 Utlim

0.1

ຕິດຕໍ່ voltage (EARTH test ­ TT system)

ຊ່ວງ [V]

ຄວາມລະອຽດ [V]

0 99.9

0.1

ຕິດຕໍ່ voltage (EARTH test ­ TN system)

ຊ່ວງ [V]

ຄວາມລະອຽດ [V]

0 99.9

0.1

100 999

1

ຄວາມຕ້ານທານກັບດິນດ້ວຍວິທີການ 3 ສາຍ

ຊ່ວງ []

ຄວາມລະອຽດ []

0.01 9.99

0.01

10.0 99.9

0.1

100 999

1

1.00k 49.99k

0.01k

ທົດສອບປະຈຸບັນ:

<10mA ­ 77.5Hz, Open-circuit voltage: < 20Vrms

(*) ເພີ່ມ 5% ໃຫ້ກັບຄວາມຖືກຕ້ອງຖ້າ probe resistance (Rs ຫຼື Rh) > 100 x Rmeas

Accuracy -0%, +(5.0 rdg + 3V)
Accuracy -0%, +(5.0 rdg + 3V)
Accuracy -0%, +(5.0 rdg + 3V)
ຄວາມຖືກຕ້ອງ (*)
(5.0 rdg + 3dgt)

ຄວາມຕ້ານທານຂອງດິນດ້ວຍວິທີການ 4 ສາຍ Wenner

Range [m]

Resolution [m]

0.06 9.99

0.01

10.0 99.9

0.1

100 999

1

1.00k 9.99k

0.01k

10.0k 99.9k

0.1k

100k 999k

1k

ຂະ ໜາດ 1.00M 3.14M

0.01M

(*) with distance d=10m, Distance “d” range:

1 10 ມ

ທົດສອບປະຈຸບັນ:

<10mA ­ 77.5Hz, Open-circuit voltage: < 20Vrms

Accuracy (*) (5.0 rdg + 3dgt)

ການຫມຸນລໍາດັບໄລຍະດ້ວຍວິທີ 1 ສາຍ

ສະບັບtage range PN, P-PE[V]

ຊ່ວງຄວາມຖີ່

100 265

50Hz/60Hz 5%

ການ​ວັດ​ແທກ​ແມ່ນ​ໄດ້​ຮັບ​ການ​ປະ​ຕິ​ບັດ​ພຽງ​ແຕ່​ໂດຍ​ການ​ສໍາ​ພັດ​ໂດຍ​ກົງ​ກັບ​ພາກ​ສ່ວນ​ທີ່​ມີ​ຊີ​ວິດ​ຂອງ​ໂລ​ຫະ (ບໍ່​ແມ່ນ​ຢູ່​ໃນ​ກາບ insulation​)

ສະບັບtage drop on main power lines (V%)

ຊ່ວງ (%)

ຄວາມລະອຽດ (%)

0 100

0.1

Accuracy (10.0 rdg + 4dgt)

ກະແສໄຟຟ້າຮົ່ວໄຫຼ (ໂດຍ HT96U ທາງເລືອກ clamp transducer)

ໄລຍະ [mA]

ຄວາມລະອຽດ [mA]

0.5 999.9

0.1

Accuracy (5.0 rdg + 2dgt)

ພາລາມິເຕີສິ່ງແວດລ້ອມ (ຟັງຊັນ AUX)

ພາລາມິເຕີ

ຊ່ວງ

ອຸນຫະພູມ [°C]

-20°C 80°C ອຸນ​ຫະ​ພູມ

ອຸນຫະພູມ [°F]

-4°F 176°F

ຄວາມຊຸ່ມຊື່ນທີ່ກ່ຽວຂ້ອງ [%HR]

0 100%HR

DC ຜົນຜະລິດ voltage

0.1mV 1.0V

0.001Lux 20.00 Lux (*)

ຄວາມສະຫວ່າງ [Lux]

0.1 Lux 2000 Lux (*)

1 Lux 20 kLux (*)

(*) ຄວາມຖືກຕ້ອງຂອງ HT53 lux probe ແມ່ນອີງຕາມ Class AA

Resolution 0.1 °C 0.1 °F
0.1% UR 0.1mV
0.001 0.02 Lux 0.1 2 Lux 1 20 Lux

Accuracy (2.0rdg+2dgt)

HT ITALIA SRL Via della Boaria, 40 48018 ­ Faenza (RA) ­ Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com

ພວກເຮົາຢູ່ໃສ

MACROTESTG3
Professional installation safety tester

Rel 2.02 of 26/05/25 Pag 5 of 6

ການວັດແທກພາລາມິເຕີຫຼັກ ແລະຄວາມກົມກຽວກັນ (PQA)

AC TRMS Voltage
Range [V] 15.0 459.9
Allowed crest factor

Resolution [V] 0.1V
1,5 ; Frequency: 42.5 69.0 Hz

ຄວາມຖືກຕ້ອງ (1.0rdg + 1dgt)

ຄວາມຖີ່

ຊ່ວງ [Hz]

ຄວາມລະອຽດ [Hz]

42.5 69.0

0.01

ອະນຸຍາດ voltage: 15.0 459.9V ; Allowed current: 5%FS clamp FS clamp

ຄວາມຖືກຕ້ອງ (2.0rdg + 2dgt)

AC TRMS ປັດຈຸບັນ

FS clamp

ຊ່ວງ [A]

10A

5% FS 9.99

10A FS 200

5% FS 199.9

200A FS 3000

5% FS 2999

Range: 5 999.9 mV; Values under 5mV are zeroed

Allowed crest factor

3; Frequency: 42.5 69.0 Hz

ຄວາມລະອຽດ [A] 0.01 0.1 1

ຄວາມຖືກຕ້ອງ
1Ph: (1.0rdg + 3 dgt) 3Ph: (2.0rdg + 5 dgt)

Active power (@ 230V in 1Ph systems, 400V in 3Ph systems, cos=1, f=50.0Hz)

FS clamp

ຂອບເຂດ [kW]

ຄວາມລະອຽດ [kW]

ຄວາມຖືກຕ້ອງ

10A

0.000 9.999

0.001

10A FS 200

0.00 999.99

0.01

1Ph: (2.0rdg + 5 dgt)

200A FS 1000

0.0 999.9

0.1

3Ph: (2.5rdg + 8 dgt)

1000A FS 3000

0 9999

1

Reactive power (@ 230V in 1Ph systems, 400V in 3Ph systems, cos=0, f=50.0Hz)

FS clamp

ຊ່ວງ [kVAr]

ຄວາມລະອຽດ [kVAr]

ຄວາມຖືກຕ້ອງ

10A

0.000 9.999

0.001

10A FS 200

0.00 999.99

0.01

1Ph: (2.0rdg + 7 dgt)

200A FS 1000

0.0 999.9

0.1

3Ph: (3.0rdg + 8 dgt)

1000A FS 3000

0 9999

1

ປັດໄຈພະລັງງານ (@ 230V ໃນລະບົບ 1Ph, 400V ໃນລະບົບ 3Ph, f = 50.0Hz)

ຊ່ວງ

ຄວາມລະອຽດ

ຄວາມຖືກຕ້ອງ

0.70c 1.00 0.70i

0.01

(4.0rdg + 10dgt) if I 10%FS (2.0rdg + 3dgt) if I > 10%FS

cos (@ 230V in 1Ph systems, 400V in 3Ph systems, f=50.0Hz)

ຊ່ວງ

ຄວາມລະອຽດ

ຄວາມຖືກຕ້ອງ

0.70c 1.00 0.70i

0.01

(4.0rdg + 10dgt) if I 10%FS (1.0rdg + 7dgt) if I > 10%FS

ສະບັບtage harmonics (@ 230V ໃນລະບົບ 1Ph, 400V ໃນລະບົບ 3Ph, f=50.0Hz)

ຊ່ວງ [%]

ຄວາມລະອຽດ [%]

ສັ່ງ

ຄວາມຖືກຕ້ອງ

0.1 100.0

0.1

01 25

(5.0rdg + 5dgt)

Frequency of fundamental: 42.5 69.0 Hz, DC accuracy not declared

ຄວາມກົມກຽວໃນປະຈຸບັນ (f=50Hz)

ຊ່ວງ [%]

ຄວາມລະອຽດ [%]

0.1 100.0

0.1

ສັ່ງ 01 9 10 17 18 25

Accuracy (5.0rdg + 5dgt) (10.0rdg + 5dgt) (15.0rdg + 10dgt)

HT ITALIA SRL Via della Boaria, 40 48018 ­ Faenza (RA) ­ Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com

ພວກເຮົາຢູ່ໃສ

MACROTESTG3
Professional installation safety tester

Rel 2.02 of 26/05/25 Pag 6 of 6

2. ຂໍ້ມູນຈໍາເພາະທົ່ວໄປ

DISPLAY AND MEMORY: Features: Memory: Communication:

Touch screen, color graphic LCD, 320x240mm 999 locations, 3 marker levels Optical-USB and built-in WiFi

POWER SUPPLY: Batteries: Battery life: Auto Power OFF:

6 x 1.2V(rechargeable) type AA or 6 x 1.5V type AA > 500 test for each function after 5 min of idleness (disabled)

MECHANICAL FEATURES: Dimensions (L x W x H): Weight (included batteries):
WORKING ENVIRONMENTAL CONDITIONS: Reference temperature: Working temperature: Allowed relative humidity: Storage temperature: Storage humidity:
TEST VERIFIES REFERENCE STANDARDS: Continuity test with 200mA: Insulation resistance: Earth resistance: Fault loop impedance: RCD test: Multifunction: Prospective short circuit current: Earth resistance on TN systems:

ຂະ ໜາດ 225 x 165 x 75mm 1.2kg
23°C 5°C 0°C 40°C <80%RH -10°C 60°C <80%RH
IEC/EN61557-4 IEC/EN61557-2 IEC/EN61557-5 IEC/EN61557-3 IEC/EN61557-6 IEC/EN61557-10 EN60909-0 EN61936-1 + EN50522

GENERAL REFERENCE STANDARDS: Safety of measuring instruments: Product type standard: Technical documentation : Insulation: Pollution degree: Encapsulation :
Overvoltage category: Max height of use:

IEC/EN61010-1, IEC/EN61010-031, IEC/EN61010-2-032 IEC/EN61557-1 IEC/EN61187 double insulation 2 IP40
CAT IV 300V (to ground), max 415V between inputs 2000m

ເຄື່ອງມືນີ້ຕອບສະຫນອງຄວາມຕ້ອງການຂອງ Low Voltage Directive 2014/35/EU (LVD), EMC Directive 2014/35/EU and Directive RED 2014/53/EU
ເຄື່ອງ​ມື​ນີ້​ຕອບ​ສະ​ຫນອງ​ຄວາມ​ຕ້ອງ​ການ​ຂອງ European Directive 2011/65/EU (RoHS) ແລະ 2012/19/EU (WEEE)

HT ITALIA SRL Via della Boaria, 40 48018 ­ Faenza (RA) ­ Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com

ພວກເຮົາຢູ່ໃສ

Diensten van EURO-INDEX

EURO-INDEX is fabrikant, importeur en distributeur van diverse A-merken op het gebied van test- en meetinstrumenten. Daarnaast leveren wij een groot aantal diensten om het gebruik van deze instrumenten in uw bedrijfsvoering te optimaliseren. Dit omvat uiteraard onderhoud, reparatie en kalibratie van de instrumenten, maar ook kennisdeling via de EURO-INDEX Academy en verhuur van instrumenten.

Geautoriseerd Service Centrum EURO-INDEX b.v. is van alle vertegenwoordigde merken een Geautoriseerd Service Centrum. Dit betekent dat uw instrumenten worden behandeld door technici die zijn opgeleid door de fabrikant en beschikken over de juiste gereedschappen en software. Er worden uitsluitend originele onderdelen toegepast en de garantie van uw instrument, evenals de certificering (ATEX, EN50379, etc.) blijven intact.

Kalibratielaboratorium

Ons moderne service- en kalibratielaboratorium beschikt over een

RvA accreditatie naar NEN-EN-ISO/IEC 17025. Deze accreditatie

geldt voor grootheden, zoals gespecificeerd in de scope bij accreditatienummer K105.

Meer info

Kijk voor een overzicht van al onze diensten op euro-index.nl/diensten

Mobiele Service

Naast de vaste kalibratielaboratoria in Capelle aan den IJssel

en Zaventem beschikken wij ook over laboratoria op wielen met

de naam “Mobiele Service”. Dit biedt vertrouwde

service en kwaliteit, bij u voor de deur!

Meer info

KWS®

KWS® is een uniek servicesysteem voor uw meetinstrumenten

met periodiek onderhoud en kalibratie tegen vaste, lage kosten.

Uw kalibratiecertificaten zijn digitaal beschikbaar via Mijn KWS (gratis webportaal en app).

Meer info

Verhuur van meetinstrumenten

Uitgebreid assortiment

Nauwkeurigheid aantoonbaar door actueel kalibratiecertificaat

Deskundig advies Complete levering inclusief accessoires

Meer info

EURO-INDEX Academy Trainingen (individueel en klassikaal) Cursussen en workshops Demonstratie- en instructievideo’s Whitepapers

Meer info

Servicebalie

Onderhoud, reparatie en kalibratie

Cursussen en workshops

Mobiele Service

Wijzigingen voorbehouden EURO-INDEX® NL 24005

ເອກະສານ / ຊັບພະຍາກອນ

HT INSTRUMENTS MACROTESTG3 Multifunction Multi Tester [pdf] ຄໍາແນະນໍາ MACROTESTG3 Multifunction Multi Tester, MACROTESTG3, Multifunction Multi Tester, Multi Tester

ເອກະສານອ້າງອີງ

• ຄູ່ມືຜູ້ໃຊ້