HT INSTRUMENTS MACROTESTG3 Multifunction Multi Tester
Tæknilýsing
- Opið hringrás binditage: 4V til 12V
- Einangrunarviðnám (DC rúmmáltage):
- Próf binditage [V]
- Svið [M]
- Upplausn [M]
- Nákvæmni
- Hámarksprófunarstraumur: 5.81A (at 265V); 10.10A (at 457V)
- Próf binditage svið: 100-265V (Line-Neutral) / 100-460V (Line-Line); 50/60Hz ±5%
- Öryggisvörn: Z-lína (lína-lína, línu-hlutlaus, línu-PE)
- Einangrunarefni: PVC, Rubber butyl, EPR, XLPE
- First fault current (IT systems):
- Svið (mA)
- Upplausn (mA)
- Takmarka snertingu binditage (ULIM): 25V, 50V
Electrical Safety Testing
- Connect the safety tester according to the specified voltage svið.
- Select the appropriate insulation resistance test voltage.
- Measure the insulation resistance and ensure it falls within the specified accuracy range.
- Check the maximum test current and ensure it is within the safe limits for testing.
- Perform first fault current tests as required.
RCD prófun
- Select the RCD type and rated tripping currents for testing.
- Set the Line-PE and Line-N voltage samkvæmt forskriftum.
- Perform RCD Molded type tripping time range tests based on the specific RCD type and current settings.
“`
Opið hringrás binditage: Short circuit current: Nominal test current: Safety protection:
nominal test voltage 0% +10% <6.0mA at 500V test voltage
>1mA if load= 1k*Vnom (Vnom=50V, 100V, 250V, 500V, 1000V) the display shows an error message for input voltage> 10V
Z-lína (lína-lína, línu-hlutlaus, línu-PE)
Svið []
Upplausn []
Nákvæmni
0.00 199.9 m (*) 200 1999 m (*)
0.1 m (*) 1 m (*)
(5.0 rdg + 1m) (*)
0.01 9.99 10.0 199.9
0.01 0.1
(5.0 rdg + 3dgt)
(*) By means of IMP57 optional accessory
Hámarks prófstraumur
5.81A (at 265V); 10.10A (at 457V)
Próf binditage ranges: Protection type: Insulation materials:
100265V (Line-Neutral) / 100460V (Line-Line); 50/60Hz 5% MCB (B, C, D, K), Fuse (gG, aM) PVC, Rubber butyl, EPR, XLPE
Fyrsta bilunarstraumur (upplýsingakerfi)
Svið (mA)
Upplausn (mA)
0.1 0.9
0.1
1 999
1
Takmarka snertingu binditage (ULIM)
25V, 50V
Accuracy (5.0 rdg + 1dgt) (5.0 rdg + 3dgt)
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
HVAR VIÐ ERUM
MACROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 2 of 6
RCD prófun (mótað hylki)
RCD type:
AC ( ), A/F ( ), B/B+( ) General (G), Selective (S) and Delayed ( )
Rated tripping currents (IN)::
6mA, 10mA, 30mA, 100mA, 300mA, 500mA, 650mA, 1000mA
Lína-PE, Lína-N rúmmáltage:
100V 265V RCD type AC and A/F, 190V 265V RCD type B/B+
Tíðni:
50/60Hz 5%
RCD tripping current (Molded case type RCD General)
RCD gerð
IN
Range IN [mA] Resolution [mA]
AC, A/F, B/B+
6mA, 10mA
AC, A/F, B/B+ 30mA IN 300mA (0.2 1.1) IN
0.1 IN
AC, A/F 500mA IN 650mA
Accuracy IN – 0%, +10%IN
– 0%, +5%IN
RCD Molded type tripping time range [ms] (TT/TN system)
x 1 / 2
x 1
x 2
x 5
AUTO
GS
GS
GS
GS
GS
6mA 10mA 30mA
m
AC 999 999 999 999 999 999 160 210 A/F 999 999 999 999 999 999 160 210 B/B+ 999 999 999 999 999 999 AC 999 999 999 999 999 999 160 210 A/F 999 999 999 999 999 999 160 210 B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 160 210 A/F 999 999 999 999 999 999 160 210
50 150 50 150
50 150 50 150
50 150 50 150
B/B+ 999 999 999 999 999 999 AC 999 999 999 999 999 999 160 210 100mA A/F 999 999 999 999 999 999 160 210
50 150 50 150
B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 160 210 300mA A/F 999 999 999 999 999 999 160 210
B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 160 210
500mA 650mA
A / F
999 999 999 999 999 999 160 210
B/B+
50 150 50 150
50 150
AC 999 999 999 999 999 999 160 210 1000mA A/F 999 999 999 999 999 999
B/B+
Resolution: 1ms, Accuracy: (2.0rdg + 2dgt)
RCD Molded type tripping time range [ms] (IT system) (*)
GS
310 310 310 310 310 310
310 310 310 310 310 310 310 310 310 310 310
AUTO+ G S
x 1 / 2
x 1
x 2
x 5
AUTO
GS
GS
GS
GS
GS
6mA AC 999 999 999 999 999 999 160 210
10mA A/F 999 999 999 999 999 999 160 210
30mA B/B+ 999 999
999 999
100mA 300mA
AC A/F B/B+
999 999 999
999 999 999
999 999
999 999 999
999 999 999
999 999
160 160
210 210
500mA 650mA
AC A/F B/B+
999 999
999 999
999 999
999 999
999 999
999 999
160 160
210 210
50 150 50 150
50 150 50 150
50 150
AC 999 999 1000mA A/F 999 999
B/B+
999 999 999 999
160 210
Resolution: 1ms, Accuracy: (2.0rdg + 2dgt) (*) Selection RCD type A/F and type B/B+ available only for Norway country
GS
310 310 310 310 310
SJÁLFVIRK+
GS
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
HVAR VIÐ ERUM
MACROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 3 of 6
Prófun á jarðlekaprófara fyrir lekalokun (með RCDX10 aukabúnaði)
RCD type: Rated tripping currents (IN):: Line-PE, Line-N voltage: Tíðni:
AC ( ), A/F ( ), B/B+( ) General (G), Selective (S) and Delayed ( ) 0.3A 10A (type AC, A/F) ; 0.3A 3.0A (type B/B+) 100V 265V RCD type AC and A/F, 190V 265V RCD type B/B+ 50/60Hz 5%
Jarðlekaprófari fyrir útleysingarstraum RCDs (almenn RCD)
RCD gerð
IN
Range IN [mA] Resolution [mA]
Accuracy IN
AC, A/F, B/B+ AC, A/F
300mA IN 1A 1.1A IN 10A
(0.3 1.1) IN
0.1IN
– 0%, +5%IN
Tímabil útfellingar á jarðlekaprófurum fyrir lekalokun [ms] (TT/TN kerfi)
x 1 / 2
x 1
x 2
x 5
AUTO
0.3A
1.0A
1.1A
3.0A
3.1A
6.5A
6.6A
10.0A
GS
GS
GS
AC 999 999 999 999 999 999 200 250
A/F 999 999 999 999 999 999 200 250
B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 200 250 A/F 999 999 999 999 999 999 200 250 B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 200 250 A/F 999 999 999 999 999 999 200 250 B/B+
AC 999 999 999 999 999 999 200 250 A/F 999 999 999 999 999 999 B/B+
G S 50 150 50 150
50 150 50 150
50 150 50 150
GS
G S 310 310 310 310 310
310 310
Resolution: 1ms, Accuracy: (2.0rdg + 2dgt)
Earth leakage delay tester RCDs trip out time range [ms] (IT system) (*)
x 1 / 2
x 1
x 2
x 5
GS
GS
GS
GS
0.3A
3.0A
AC A/F B/B+
999 999 999 999 999 999 200 250 999 999 999 999 999 999 200 250
50 150 50 150
3.1A
6.5A
AC A/F B/B+
999 999 999 999 999 999 200 250 999 999 999 999 999 999 200 250
50 150 50 150
6.6A
10.0A
AC A/F B/B+
999 999 999 999 999 999 200 250 999 999 999 999 999 999 200 250
Resolution: 1ms, Accuracy: (2.0rdg + 2dgt) (*) Selection RCD type A/F and type B/B+ available only for Norway country
AUTO G S
G S 310
310
NoTripTest Non-trip earth loop impedance
Próf binditage:
100265V (Line-PE), 50/60Hz 5%
NoTripTest Systems with Neutral wire
Svið []
Upplausn []
Nákvæmni (*)
0.01 9.99
0.01
(5 reading + N/10)
10.0 199.9
0.1
(5 reading + N)
200 1999
1
(5 reading + 3N)
(*) If IN <30mA, test current = IN/2 and N[]=30/IN; if IN 30mA, test current <15mA and N=1
NoTripTest Systems without Neutral wire
Svið []
Upplausn []
Nákvæmni (*)
1 1999
1
-0%, +(5.0 lettura +N)
(*) if IN <30mA, test current = IN/2 and N[]=(10×30)/IN ; If IN 30mA, test current IN/2 and N[]=(3×30)/IN
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
HVAR VIÐ ERUM
MACROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 4 of 6
Hafðu samband binditage (RCD og NoTripTest)
Svið [V]
Upplausn [V]
0 Utlim
0.1
Hafðu samband binditage (EARTH test TT system)
Svið [V]
Upplausn [V]
0 99.9
0.1
Hafðu samband binditage (EARTH test TN system)
Svið [V]
Upplausn [V]
0 99.9
0.1
100 999
1
Jarðviðnám með 3-víra aðferð
Svið []
Upplausn []
0.01 9.99
0.01
10.0 99.9
0.1
100 999
1
1.00k 49.99k
0.01 þús
Prófstraumur:
<10mA 77.5Hz, Open-circuit voltage: < 20Vrms
(*) Bætið 5% við nákvæmnina ef viðnám mælisins (Rs eða Rh) er > 100 x Rmeas
Accuracy -0%, +(5.0 rdg + 3V)
Accuracy -0%, +(5.0 rdg + 3V)
Accuracy -0%, +(5.0 rdg + 3V)
Nákvæmni (*)
(5.0 rdg + 3dgt)
Jarðviðnám með 4-víra Wenner aðferð
Range [m]
Resolution [m]
0.06 9.99
0.01
10.0 99.9
0.1
100 999
1
1.00k 9.99k
0.01 þús
10.0k 99.9k
0.1 þús
100k 999k
1k
1.00M 3.14M
0.01M
(*) with distance d=10m, Distance “d” range:
1 10m
Prófstraumur:
<10mA 77.5Hz, Open-circuit voltage: < 20Vrms
Accuracy (*) (5.0 rdg + 3dgt)
Fasaröðarsnúningur með 1-víra aðferð
Voltage svið PN, P-PE[V]
Tíðnisvið
100 265
50Hz/60Hz 5%
Mæling fer aðeins fram með beinni snertingu við málmhluta (ekki á einangrunarhjúp).
Voltage drop on main power lines (V%)
Svið (%)
Upplausn (%)
0 100
0.1
Accuracy (10.0 rdg + 4dgt)
Lekastraumur (með HT96U valfrjálsum clamp transducer)
Svið [mA]
Upplausn [mA]
0.5 999.9
0.1
Accuracy (5.0 rdg + 2dgt)
Umhverfisbreytur (AUX-virkni)
Parameter
Svið
Hitastig [°C]
-20 ° C 80 ° C
Hitastig [°F]
-4°F 176°F
Rakastig [%HR]
0 100%HR
DC framleiðsla voltage
0.1mV 1.0V
0.001Lux 20.00 Lux (*)
Lýsingarstyrkur [Lux]
0.1 Lux 2000 Lux (*)
1 Lux 20 kLux (*)
(*) Nákvæmni HT53 lúxusmælisins er samkvæmt flokki AA.
Upplausn 0.1 °C 0.1 °F
0.1% UR 0.1mV
0.001 0.02 Lux 0.1 2 Lux 1 20 Lux
Accuracy (2.0rdg+2dgt)
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
HVAR VIÐ ERUM
MACROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 5 of 6
Mæling á helstu breytum og sveiflum (PQA)
AC TRMS Voltage
Range [V] 15.0 459.9
Allowed crest factor
Resolution [V] 0.1V
1,5 ; Frequency: 42.5 69.0 Hz
Nákvæmni (1.0 mælieining + 1 mælieiningar)
Tíðni
Svið [Hz]
Upplausn [Hz]
42.5 69.0
0.01
Leyfilegt árgtage: 15.0 459.9V ; Allowed current: 5%FS clamp FS kl.amp
Nákvæmni (2.0 mælieining + 2 mælieiningar)
AC TRMS straumur
FS kl.amp
Svið [A]
10A
5% FS 9.99
10A FS 200
5% FS 199.9
200A FS 3000
5% FS 2999
Range: 5 999.9 mV; Values under 5mV are zeroed
Allowed crest factor
3; Frequency: 42.5 69.0 Hz
Upplausn [A] 0.01 0.1 1
Nákvæmni
1Ph: (1.0rdg + 3 dgt) 3Ph: (2.0rdg + 5 dgt)
Active power (@ 230V in 1Ph systems, 400V in 3Ph systems, cos=1, f=50.0Hz)
FS kl.amp
Svið [kW]
Upplausn [kW]
Nákvæmni
10A
0.000 9.999
0.001
10A FS 200
0.00 999.99
0.01
1Ph: (2.0rdg + 5 dgt)
200A FS 1000
0.0 999.9
0.1
3Ph: (2.5rdg + 8 dgt)
1000A FS 3000
0 9999
1
Reactive power (@ 230V in 1Ph systems, 400V in 3Ph systems, cos=0, f=50.0Hz)
FS kl.amp
Svið [kVAr]
Upplausn [kVAr]
Nákvæmni
10A
0.000 9.999
0.001
10A FS 200
0.00 999.99
0.01
1Ph: (2.0rdg + 7 dgt)
200A FS 1000
0.0 999.9
0.1
3Ph: (3.0rdg + 8 dgt)
1000A FS 3000
0 9999
1
Aflstuðull (@ 230V í 1Ph kerfum, 400V í 3Ph kerfum, f=50.0Hz)
Svið
Upplausn
Nákvæmni
0.70c 1.00 0.70i
0.01
(4.0rdg + 10dgt) if I 10%FS (2.0rdg + 3dgt) if I > 10%FS
cos (@ 230V in 1Ph systems, 400V in 3Ph systems, f=50.0Hz)
Svið
Upplausn
Nákvæmni
0.70c 1.00 0.70i
0.01
(4.0rdg + 10dgt) if I 10%FS (1.0rdg + 7dgt) if I > 10%FS
Voltage-samhljómar (@ 230V í 1Ph kerfum, 400V í 3Ph kerfum, f=50.0Hz)
Svið [%]
Upplausn [%]
Panta
Nákvæmni
0.1 100.0
0.1
01 25
(5.0rdg + 5dgt)
Frequency of fundamental: 42.5 69.0 Hz, DC accuracy not declared
Núverandi samsvörun (f=50Hz)
Svið [%]
Upplausn [%]
0.1 100.0
0.1
Pantaðu 01 9 10 17 18 25
Accuracy (5.0rdg + 5dgt) (10.0rdg + 5dgt) (15.0rdg + 10dgt)
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
HVAR VIÐ ERUM
MACROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 6 of 6
2. ALMENNAR UPPLÝSINGAR
DISPLAY AND MEMORY: Features: Memory: Communication:
Touch screen, color graphic LCD, 320x240mm 999 locations, 3 marker levels Optical-USB and built-in WiFi
POWER SUPPLY: Batteries: Battery life: Auto Power OFF:
6 x 1.2V(rechargeable) type AA or 6 x 1.5V type AA > 500 test for each function after 5 min of idleness (disabled)
MECHANICAL FEATURES: Dimensions (L x W x H): Weight (included batteries):
WORKING ENVIRONMENTAL CONDITIONS: Reference temperature: Working temperature: Allowed relative humidity: Storage temperature: Storage humidity:
TEST VERIFIES REFERENCE STANDARDS: Continuity test with 200mA: Insulation resistance: Earth resistance: Fault loop impedance: RCD test: Multifunction: Prospective short circuit current: Earth resistance on TN systems:
225 x 165 x 75mm 1.2kg
23°C 5°C 0°C 40°C <80%RH -10°C 60°C <80%RH
IEC/EN61557-4 IEC/EN61557-2 IEC/EN61557-5 IEC/EN61557-3 IEC/EN61557-6 IEC/EN61557-10 EN60909-0 EN61936-1 + EN50522
GENERAL REFERENCE STANDARDS: Safety of measuring instruments: Product type standard: Technical documentation : Insulation: Pollution degree: Encapsulation :
Yfirvoltage category: Max height of use:
IEC/EN61010-1, IEC/EN61010-031, IEC/EN61010-2-032 IEC/EN61557-1 IEC/EN61187 double insulation 2 IP40
CAT IV 300V (to ground), max 415V between inputs 2000m
Þetta hljóðfæri uppfyllir kröfur Low Voltage Directive 2014/35/EU (LVD), EMC Directive 2014/35/EU and Directive RED 2014/53/EU
Þetta tæki uppfyllir kröfur Evróputilskipunar 2011/65/ESB (RoHS) og 2012/19/ESB (WEEE)
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
HVAR VIÐ ERUM
Þjónusta EURO-INDEX
EURO-INDEX is fabrikant, importeur en distributeur van diverse A-merken op het gebied van test- en meetinstrumenten. Daarnaast leveren wij een groot aantal diensten om het gebruik van deze instrumenten in uw bedrijfsvoering te optimaliseren. Dit omvat uiteraard onderhoud, reparatie en kalibratie van de instrumenten, maar ook kennisdeling via de EURO-INDEX Academy en verhuur van instrumenten.
Geautoriseerd Service Centrum EURO-INDEX b.v. is van alle vertegenwoordigde merken een Geautoriseerd Service Centrum. Dit betekent dat uw instrumenten worden behandeld door technici die zijn opgeleid door de fabrikant en beschikken over de juiste gereedschappen en software. Er worden uitsluitend originele onderdelen toegepast en de garantie van uw instrument, evenals de certificering (ATEX, EN50379, etc.) blijven intact.
Kalibratielaboratorium
Ons moderne service- en kalibratielaboratorium beschikt over een
RvA accreditatie naar NEN-EN-ISO/IEC 17025. Deze accreditatie
geldt voor grootheden, zoals gespecificeerd in de scope bij accreditatienummer K105.
Meer info
Kijk voor een overzicht van al onze diensten op euro-index.nl/diensten
Mobiele Service
Naast de vaste kalibratielaboratoria in Capelle aan den IJssel
en Zaventem beschikken wij ook over laboratoria op wielen met
de naam “Mobiele Service”. Dit biedt vertrouwde
service en kwaliteit, bij u voor de deur!
Meer info
KWS®
KWS® is een uniek servicesysteem voor uw meetinstrumenten
met periodiek onderhoud en kalibratie tegen vaste, lage kosten.
Uw kalibratiecertificaten zijn digitaal beschikbaar via Mijn KWS (gratis webportaal en app).
Meer info
Verhuur van meetinstrumenten
Uitgebreid assortiment
Nauwkeurigheid aantoonbaar door actueel kalibratiecertificaat
Deskundig advies Complete levering inclusief accessoires
Meer info
EURO-INDEX Academy Trainingen (individueel en klassikaal) Cursussen en workshops Demonstratie- en instructievideo’s Whitepapers
Meer info
Servicebalie
Onderhoud, reparatie en kalibratie
Cursussen en workshops
Mobiele Service
Wijzigingen voorbehouden EURO-INDEX® NL 24005
Skjöl / auðlindir
 |
HT INSTRUMENTS MACROTESTG3 Multifunction Multi Tester [pdfLeiðbeiningar MACROTESTG3 Multifunction Multi Tester, MACROTESTG3, Multifunction Multi Tester, Multi Tester |