HT INSTRUMENTS MACROTESTG3 Multifunction Multi Tester
Mga detalye
- Open-circuit voltage: 4V hangtod 12V
- Insulation resistance (DC voltage):
- Pagsulay voltage [V]
- Sakup [M]
- Resolusyon [M]
- Pagkatukma
- Maximum nga pagsulay karon: 5.81A (at 265V); 10.10A (at 457V)
- Pagsulay voltage range: 100-265V (Line-Neutral) / 100-460V (Line-Line); 50/60Hz ±5%
- Panalipod sa kaluwasan: Z Line (Line-Line, Line-Neutral, Line-PE)
- Mga materyales sa pagbulag: PVC, Rubber butyl, EPR, XLPE
- First fault current (IT systems):
- Range (mA)
- Resolution (mA)
- Limitahan ang kontak voltage (ULIM): 25V, 50V
Electrical Safety Testing
- Connect the safety tester according to the specified voltage range.
- Select the appropriate insulation resistance test voltage.
- Measure the insulation resistance and ensure it falls within the specified accuracy range.
- Check the maximum test current and ensure it is within the safe limits for testing.
- Perform first fault current tests as required.
Pagsulay sa RCD
- Select the RCD type and rated tripping currents for testing.
- Set the Line-PE and Line-N voltage sumala sa mga detalye.
- Perform RCD Molded type tripping time range tests based on the specific RCD type and current settings.
“`
Open-circuit voltage: Short circuit current: Nominal test current: Safety protection:
nominal test voltage 0% +10% <6.0mA at 500V test voltage
>1mA if load= 1k*Vnom (Vnom=50V, 100V, 250V, 500V, 1000V) the display shows an error message for input voltage> 10V
Z Line (Line-Line, Line-Neutral, Line-PE)
Sakop []
Resolusyon []
Pagkatukma
0.00 199.9 m (*) 200 1999 m (*)
0.1 m (*) 1 m (*)
(5.0 rdg + 1m) (*)
0.01 9.99 10.0 199.9
0.01 0.1
(5.0 rdg + 3dgt)
(*) By means of IMP57 optional accessory
Maximum nga pagsulay kasamtangan
5.81A (at 265V); 10.10A (at 457V)
Pagsulay voltage ranges: Protection type: Insulation materials:
100265V (Line-Neutral) / 100460V (Line-Line); 50/60Hz 5% MCB (B, C, D, K), Fuse (gG, aM) PVC, Rubber butyl, EPR, XLPE
First fault current (IT systems)
Range (mA)
Resolution (mA)
0.1 0.9
0.1
1 999
1
Limitahan ang kontak voltage (ULIM)
25V, 50V
Accuracy (5.0 rdg + 1dgt) (5.0 rdg + 3dgt)
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
ASA KAMI
MACROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 2 of 6
RCD test (Molded case type)
RCD type:
AC ( ), A/F ( ), B/B+( ) General (G), Selective (S) and Delayed ( )
Rated tripping currents (IN)::
6mA, 10mA, 30mA, 100mA, 300mA, 500mA, 650mA, 1000mA
Line-PE, Line-N voltage:
100V 265V RCD type AC and A/F, 190V 265V RCD type B/B+
Kadaghanon:
50/60Hz 5%
RCD tripping current (Molded case type RCD General)
RCD nga tipo
IN
Range IN [mA] Resolution [mA]
AC, A/F, B/B+
6mA,10mA
AC, A/F, B/B+ 30mA IN 300mA (0.2 1.1) IN
0.1 SA
AC, A/F 500mA IN 650mA
Accuracy IN – 0%, +10%IN
– 0%, +5%IN
RCD Molded type tripping time range [ms] (TT/TN system)
x1/2
x 1
x 2
x 5
AUTO
GS
GS
GS
GS
GS
6mA 10mA 30mA
m
AC 999 999 999 999 999 999 160 210 A/F 999 999 999 999 999 999 160 210 B/B+ 999 999 999 999 999 999 AC 999 999 999 999 999 999 160 210 A/F 999 999 999 999 999 999 160 210 B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 160 210 A/F 999 999 999 999 999 999 160 210
50 150 50 150
50 150 50 150
50 150 50 150
B/B+ 999 999 999 999 999 999 AC 999 999 999 999 999 999 160 210 100mA A/F 999 999 999 999 999 999 160 210
50 150 50 150
B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 160 210 300mA A/F 999 999 999 999 999 999 160 210
B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 160 210
500mA 650mA
A/F
999 999 999 999 999 999 160 210
B/B+
50 150 50 150
50 150
AC 999 999 999 999 999 999 160 210 1000mA A/F 999 999 999 999 999 999
B/B+
Resolution: 1ms, Accuracy: (2.0rdg + 2dgt)
RCD Molded type tripping time range [ms] (IT system) (*)
GS
310 310 310 310 310 310
310 310 310 310 310 310 310 310 310 310 310
AUTO+ G S
x1/2
x 1
x 2
x 5
AUTO
GS
GS
GS
GS
GS
6mA AC 999 999 999 999 999 999 160 210
10mA A/F 999 999 999 999 999 999 160 210
30mA B/B+ 999 999
999 999
100mA 300mA
AC A/F B/B+
999 999 999
999 999 999
999 999
999 999 999
999 999 999
999 999
160 160
210 210
500mA 650mA
AC A/F B/B+
999 999
999 999
999 999
999 999
999 999
999 999
160 160
210 210
50 150 50 150
50 150 50 150
50 150
AC 999 999 1000mA A/F 999 999
B/B+
999 999 999 999
160 210
Resolution: 1ms, Accuracy: (2.0rdg + 2dgt) (*) Selection RCD type A/F and type B/B+ available only for Norway country
GS
310 310 310 310 310
AUTO+
GS
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
ASA KAMI
MACROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 3 of 6
Test on earth leakage delay tester RCDs (with RCDX10 optional accessory)
RCD type: Rated tripping currents (IN):: Line-PE, Line-N voltage: Kadaghanon:
AC ( ), A/F ( ), B/B+( ) General (G), Selective (S) and Delayed ( ) 0.3A 10A (type AC, A/F) ; 0.3A 3.0A (type B/B+) 100V 265V RCD type AC and A/F, 190V 265V RCD type B/B+ 50/60Hz 5%
Earth leakage delay tester RCDs tripping current (RCD General)
RCD nga tipo
IN
Range IN [mA] Resolution [mA]
Accuracy IN
AC, A/F, B/B+ AC, A/F
300mA IN 1A 1.1A IN 10A
(0.3 1.1) IN
0.1IN
– 0%, +5%IN
Earth leakage delay tester RCDs trip out time range [ms] (TT/TN system)
x1/2
x 1
x 2
x 5
AUTO
0.3A
1.0A
1.1A
3.0A
3.1A
6.5A
6.6A
10.0A
GS
GS
GS
AC 999 999 999 999 999 999 200 250
A/F 999 999 999 999 999 999 200 250
B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 200 250 A/F 999 999 999 999 999 999 200 250 B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 200 250 A/F 999 999 999 999 999 999 200 250 B/B+
AC 999 999 999 999 999 999 200 250 A/F 999 999 999 999 999 999 B/B+
G S 50 150 50 150
50 150 50 150
50 150 50 150
GS
G S 310 310 310 310 310
310 310
Resolution: 1ms, Accuracy: (2.0rdg + 2dgt)
Earth leakage delay tester RCDs trip out time range [ms] (IT system) (*)
x1/2
x 1
x 2
x 5
GS
GS
GS
GS
0.3A
3.0A
AC A/F B/B+
999 999 999 999 999 999 200 250 999 999 999 999 999 999
50 150 50 150
3.1A
6.5A
AC A/F B/B+
999 999 999 999 999 999 200 250 999 999 999 999 999 999
50 150 50 150
6.6A
10.0A
AC A/F B/B+
999 999 999 999 999 999 200 250 999 999 999 999 999 999
Resolution: 1ms, Accuracy: (2.0rdg + 2dgt) (*) Selection RCD type A/F and type B/B+ available only for Norway country
AUTO G S
G S 310
310
NoTripTest Non-trip earth loop impedance
Pagsulay voltage:
100265V (Line-PE), 50/60Hz 5%
NoTripTest Systems with Neutral wire
Sakop []
Resolusyon []
Pagkatukma (*)
0.01 9.99
0.01
(5 reading + N/10)
10.0 199.9
0.1
(5 reading + N)
200 1999
1
(5 reading + 3N)
(*) If IN <30mA, test current = IN/2 and N[]=30/IN; if IN 30mA, test current <15mA and N=1
NoTripTest Systems without Neutral wire
Sakop []
Resolusyon []
Pagkatukma (*)
1 1999
1
-0%, +(5.0 lettura +N)
(*) if IN <30mA, test current = IN/2 and N[]=(10×30)/IN ; If IN 30mA, test current IN/2 and N[]=(3×30)/IN
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
ASA KAMI
MACROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 4 of 6
Kontaka voltage (RCD and NoTripTest)
Sakop [V]
Resolusyon [V]
0 Utlim
0.1
Kontaka voltage (EARTH test TT system)
Sakop [V]
Resolusyon [V]
0 99.9
0.1
Kontaka voltage (EARTH test TN system)
Sakop [V]
Resolusyon [V]
0 99.9
0.1
100 999
1
Ground resistance with 3-wire method
Sakop []
Resolusyon []
0.01 9.99
0.01
10.0 99.9
0.1
100 999
1
1.00k 49.99k
0.01k
Pagsulay karon:
<10mA 77.5Hz, Open-circuit voltage: < 20Vrms
(*) Add 5% to the accuracy if the probe resistances (Rs or Rh) > 100 x Rmeas
Accuracy -0%, +(5.0 rdg + 3V)
Accuracy -0%, +(5.0 rdg + 3V)
Accuracy -0%, +(5.0 rdg + 3V)
Pagkatukma (*)
(5.0 rdg + 3dgt)
Soil resistivity with 4-wire Wenner method
Range [m]
Resolution [m]
0.06 9.99
0.01
10.0 99.9
0.1
100 999
1
1.00k 9.99k
0.01k
10.0k 99.9k
0.1k
100k 999k
1k
1.00M 3.14M
0.01M
(*) with distance d=10m, Distance “d” range:
1 10m
Pagsulay karon:
<10mA 77.5Hz, Open-circuit voltage: < 20Vrms
Accuracy (*) (5.0 rdg + 3dgt)
Phase sequence rotation with 1-wire method
Voltage range P-N, P-PE[V]
Sakup sa frequency
100 265
50Hz/60Hz 5%
Measurement is only carried out by direct contact with metal live parts (not on insulation sheath)
Voltage drop on main power lines (V%)
Sakup (%)
Resolution (%)
0 100
0.1
Accuracy (10.0 rdg + 4dgt)
Leakage current (by HT96U optional clamp transduser)
Range [mA]
Resolution [mA]
0.5 999.9
0.1
Accuracy (5.0 rdg + 2dgt)
Environmental parameters (AUX function)
Parameter
Sakop
Temperatura [°C]
-20°C 80°C
Temperatura [°F]
-4°F 176°F
Relative humidity [%HR]
0 100%HR
DC output voltage
0.1mV 1.0V
0.001Lux 20.00 Lux (*)
Illuminance [Lux]
0.1 Lux 2000 Lux (*)
1 Lux 20 kLux (*)
(*) Accuracy of HT53 lux probe is according to Class AA
Resolusyon 0.1 °C 0.1 °F
0.1% UR 0.1mV
0.001 0.02 Lux 0.1 2 Lux 1 20 Lux
Accuracy (2.0rdg+2dgt)
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
ASA KAMI
MACROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 5 of 6
Measurement of main parameters and harmonics (PQA)
AC TRMS Voltage
Range [V] 15.0 459.9
Allowed crest factor
Resolution [V] 0.1V
1,5 ; Frequency: 42.5 69.0 Hz
Katukma (1.0rdg + 1dgt)
Frequency
Range [Hz]
Resolution [Hz]
42.5 69.0
0.01
Gitugotan voltage: 15.0 459.9V ; Allowed current: 5%FS clamp FS clamp
Katukma (2.0rdg + 2dgt)
AC TRMS Current
FS clamp
Sakop [A]
10A
5% FS 9.99
10A FS 200
5% FS 199.9
200A FS 3000
5% FS 2999
Range: 5 999.9 mV; Values under 5mV are zeroed
Allowed crest factor
3; Frequency: 42.5 69.0 Hz
Resolusyon [A] 0.01 0.1 1
Pagkatukma
1Ph: (1.0rdg + 3 dgt) 3Ph: (2.0rdg + 5 dgt)
Active power (@ 230V in 1Ph systems, 400V in 3Ph systems, cos=1, f=50.0Hz)
FS clamp
Range [kW]
Resolution [kW]
Pagkatukma
10A
0.000 9.999
0.001
10A FS 200
0.00 999.99
0.01
1Ph: (2.0rdg + 5 dgt)
200A FS 1000
0.0 999.9
0.1
3Ph: (2.5rdg + 8 dgt)
1000A FS 3000
0 9999
1
Reactive power (@ 230V in 1Ph systems, 400V in 3Ph systems, cos=0, f=50.0Hz)
FS clamp
Range [kVAr]
Resolution [kVAr]
Pagkatukma
10A
0.000 9.999
0.001
10A FS 200
0.00 999.99
0.01
1Ph: (2.0rdg + 7 dgt)
200A FS 1000
0.0 999.9
0.1
3Ph: (3.0rdg + 8 dgt)
1000A FS 3000
0 9999
1
Power factor (@ 230V in 1Ph systems, 400V in 3Ph systems, f=50.0Hz)
Sakop
Resolusyon
Pagkatukma
0.70c 1.00 0.70i
0.01
(4.0rdg + 10dgt) if I 10%FS (2.0rdg + 3dgt) if I > 10%FS
cos (@ 230V in 1Ph systems, 400V in 3Ph systems, f=50.0Hz)
Sakop
Resolusyon
Pagkatukma
0.70c 1.00 0.70i
0.01
(4.0rdg + 10dgt) if I 10%FS (1.0rdg + 7dgt) if I > 10%FS
Voltage harmonics (@ 230V in 1Ph systems, 400V in 3Ph systems, f=50.0Hz)
Sakup [%]
Resolution [%]
Pag-order
Pagkatukma
0.1 100.0
0.1
01 25
(5.0rdg + 5dgt)
Frequency of fundamental: 42.5 69.0 Hz, DC accuracy not declared
Current harmonics (f=50Hz)
Sakup [%]
Resolution [%]
0.1 100.0
0.1
Pag-order 01 9 10 17 18 25
Accuracy (5.0rdg + 5dgt) (10.0rdg + 5dgt) (15.0rdg + 10dgt)
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
ASA KAMI
MACROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 6 of 6
2. KINATIBUK-ANG ESPISPIKASYON
DISPLAY AND MEMORY: Features: Memory: Communication:
Touch screen, color graphic LCD, 320x240mm 999 locations, 3 marker levels Optical-USB and built-in WiFi
POWER SUPPLY: Batteries: Battery life: Auto Power OFF:
6 x 1.2V(rechargeable) type AA or 6 x 1.5V type AA > 500 test for each function after 5 min of idleness (disabled)
MECHANICAL FEATURES: Dimensions (L x W x H): Weight (included batteries):
WORKING ENVIRONMENTAL CONDITIONS: Reference temperature: Working temperature: Allowed relative humidity: Storage temperature: Storage humidity:
TEST VERIFIES REFERENCE STANDARDS: Continuity test with 200mA: Insulation resistance: Earth resistance: Fault loop impedance: RCD test: Multifunction: Prospective short circuit current: Earth resistance on TN systems:
225 x 165 x 75mm 1.2kg
23°C 5°C 0°C 40°C <80%RH -10°C 60°C <80%RH
IEC/EN61557-4 IEC/EN61557-2 IEC/EN61557-5 IEC/EN61557-3 IEC/EN61557-6 IEC/EN61557-10 EN60909-0 EN61936-1 + EN50522
GENERAL REFERENCE STANDARDS: Safety of measuring instruments: Product type standard: Technical documentation : Insulation: Pollution degree: Encapsulation :
Labihang kabug-attage category: Max height of use:
IEC/EN61010-1, IEC/EN61010-031, IEC/EN61010-2-032 IEC/EN61557-1 IEC/EN61187 double insulation 2 IP40
CAT IV 300V (to ground), max 415V between inputs 2000m
Kini nga instrumento nagtagbaw sa mga kinahanglanon sa Ubos nga Voltage Directive 2014/35/EU (LVD), EMC Directive 2014/35/EU and Directive RED 2014/53/EU
Kini nga instrumento nagtagbaw sa mga kinahanglanon sa European Directive 2011/65/EU (RoHS) ug 2012/19/EU (WEEE)
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
ASA KAMI
Diensten sa EURO-INDEX
Ang EURO-INDEX kay pabrika, importeur ug distributeur sa lainlaing A-merken op het gebied van test- en meetinstrumenten. Daarnaast leveren wij een groot aantal diensten om het gebruik van deze instrumenten in uw bedrijfsvoering te optimaliseren. Kini nga mga omvat uiteraard onderhoud, reparatie en kalibratie van de instrumenten, maar ook kennisdeling pinaagi sa EURO-INDEX Academy ug verhuur van instrument.
Ang Geautoriseerd Service Centrum EURO-INDEX bv kay gibaligya sa Geautoriseerd Service Centrum. Dili nimo mapili ang imong instrumento nga gigamit ang mga technici sa pultahan aron maablihan ang mga pultahan sa pabrika ug magamit sa software. Er worden uitsluitend originele onderdelen toegepast en de garantie van uw instrument, evenals de certificering (ATEX, EN50379, etc.) blijven intact.
Kalibratielaboratorium
Ons moderne service- en kalibratielaboratorium beschikt over een
RvA accreditatie sa NEN-EN-ISO/IEC 17025. Deze accreditatie
geldt voor grootheden, zoals gespecificeerd in de scope bij accreditatienummer K105.
Dagko nga impormasyon
Mahimo nimong madugangan ang sobra nga gibug-aton sa euro-index.nl/diensten
Serbisyo sa Mobile
Naast de vaste kalibratielaboratoria sa Capelle aan den IJssel
en Zaventem beschikken wij ook over laboratoria op wielen met
nga gitawag og “Mobiele Service”. Dit biedt vertrouwde
serbisyo en kwaliteit, bij u voor de deur!
Dagko nga impormasyon
KWS®
Ang KWS® kay usa ka sistema sa serbisyo alang sa imong mga instrumento
met periodiek onderhoud en kalibratie tegen vaste, lage kosten.
Uw kalibratiecertificaten zijn digitaal beschikbaar via Mijn KWS (gratis webportal en app).
Dagko nga impormasyon
Verhuur van meeting instrument
Uitgebreid assortiment
Nauwkeurigheid aantoonbaar door actueel kalibratiecertificaat
Deskundig advies Complete levering inclusief accessoires
Dagko nga impormasyon
EURO-INDEX Academy Trainingen (individueel en klassikaal) Cursussen en workshops Demonstratie- en instructievideo’s Whitepapers
Dagko nga impormasyon
Servicebalie
Onderhoud, reparatie ug kalibratie
Cursussen sa mga workshop
Serbisyo sa Mobile
Wijzigingen voorbehouden EURO-INDEX® NL 24005
Mga Dokumento / Mga Kapanguhaan
 |
HT INSTRUMENTS MACROTESTG3 Multifunction Multi Tester [pdf] Mga instruksiyon MACROTESTG3 Multifunction Multi Tester, MACROTESTG3, Multifunction Multi Tester, Multi Tester |