HT INSTRUMENTS MACROTESTG3 Multifunction Multi Tester
Espesifikasyon
- Open-sikwi voltage: 4V pou 12V
- Rezistans izolasyon (DC voltage):
- Tès voltage [V]
- Ranje [M]
- Resolution [M]
- Presizyon
- Aktyèl tès maksimòm: 5.81A (at 265V); 10.10A (at 457V)
- Tès voltage chenn: 100-265V (Line-Neutral) / 100-460V (Line-Line); 50/60Hz ±5%
- Pwoteksyon sekirite: Liy Z (liy-liy, liy-net, liy-PE)
- Materyèl izolasyon: PVC, Rubber butyl, EPR, XLPE
- First fault current (IT systems):
- Ranje (mA)
- Rezolisyon (mA)
- Limit kontak voltage (ULIM): 25V, 50V
Electrical Safety Testing
- Connect the safety tester according to the specified voltage ranje.
- Select the appropriate insulation resistance test voltage.
- Measure the insulation resistance and ensure it falls within the specified accuracy range.
- Check the maximum test current and ensure it is within the safe limits for testing.
- Perform first fault current tests as required.
Tès RCD
- Select the RCD type and rated tripping currents for testing.
- Set the Line-PE and Line-N voltage dapre espesifikasyon yo.
- Perform RCD Molded type tripping time range tests based on the specific RCD type and current settings.
"`
Open-sikwi voltage: Short circuit current: Nominal test current: Safety protection:
nominal test voltage 0% +10% <6.0mA at 500V test voltage
>1mA if load= 1k*Vnom (Vnom=50V, 100V, 250V, 500V, 1000V) the display shows an error message for input voltage > 10V
Liy Z (liy-liy, liy-net, liy-PE)
Gamme []
Rezolisyon []
Presizyon
0.00 199.9 m (*) 200 1999 m (*)
0.1 m (*) 1 m (*)
(5.0 rdg + 1m) (*)
0.01 9.99 10.0 199.9
0.01 0.1
(5.0 rdg + 3dgt)
(*) By means of IMP57 optional accessory
Maksimòm tès aktyèl la
5.81A (at 265V); 10.10A (at 457V)
Tès voltage ranges: Protection type: Insulation materials:
100265V (Line-Neutral) / 100460V (Line-Line); 50/60Hz 5% MCB (B, C, D, K), Fuse (gG, aM) PVC, Rubber butyl, EPR, XLPE
Premye defo aktyèl (IT sistèm)
Ranje (mA)
Rezolisyon (mA)
0.1 0.9
0.1
1 999
1
Limit kontak voltage (ULIM)
25V, 50V
Accuracy (5.0 rdg + 1dgt) (5.0 rdg + 3dgt)
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
KOTE NOU YE
MACROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 2 of 6
Tès RCD (kalite ka moule)
RCD type:
AC ( ), A/F ( ), B/B+( ) General (G), Selective (S) and Delayed ( )
Rated tripping currents (IN)::
6mA, 10mA, 30mA, 100mA, 300mA, 500mA, 650mA, 1000mA
Liy-PE, Liy-N voltage:
100V 265V RCD type AC and A/F, 190V 265V RCD type B/B+
Frekans:
50/60Hz 5%
RCD tripping current (Molded case type RCD General)
Kalite RCD
IN
Range IN [mA] Resolution [mA]
AC, A/F, B/B+
6mA, 10mA
AC, A/F, B/B+ 30mA IN 300mA (0.2 1.1) IN
NAN NAN
AC, A/F 500mA IN 650mA
Accuracy IN – 0%, +10%IN
– 0%, +5%IN
RCD Molded type tripping time range [ms] (TT/TN system)
x 1 / 2
x 1
x 2
x 5
OTO
GS
GS
GS
GS
GS
6mA 10mA 30mA
m
AC 999 999 999 999 999 999 160 210 A/F 999 999 999 999 999 999 160 210 B/B+ 999 999 999 999 999 999 AC 999 999 999 999 999 999 160 210 A/F 999 999 999 999 999 999 160 210 B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 160 210 A/F 999 999 999 999 999 999 160 210
50 150 50 150
50 150 50 150
50 150 50 150
B/B+ 999 999 999 999 999 999 AC 999 999 999 999 999 999 160 210 100mA A/F 999 999 999 999 999 999 160 210
50 150 50 150
B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 160 210 300mA A/F 999 999 999 999 999 999 160 210
B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 160 210
500mA 650mA
A / F.
999 999 999 999 999 999 160 210
B/B+
50 150 50 150
50 150
AC 999 999 999 999 999 999 160 210 1000mA A/F 999 999 999 999 999 999
B/B+
Resolution: 1ms, Accuracy: (2.0rdg + 2dgt)
RCD Molded type tripping time range [ms] (IT system) (*)
GS
310 310 310 310 310 310
310 310 310 310 310 310 310 310 310 310 310
AUTO+ G S
x 1 / 2
x 1
x 2
x 5
OTO
GS
GS
GS
GS
GS
6mA AC 999 999 999 999 999 999 160 210
10mA A/F 999 999 999 999 999 999 160 210
30mA B/B+ 999 999
999 999
100mA 300mA
AC A/F B/B+
999 999 999
999 999 999
999 999
999 999 999
999 999 999
999 999
160 160
210 210
500mA 650mA
AC A/F B/B+
999 999
999 999
999 999
999 999
999 999
999 999
160 160
210 210
50 150 50 150
50 150 50 150
50 150
AC 999 999 1000mA A/F 999 999
B/B+
999 999 999 999
160 210
Resolution: 1ms, Accuracy: (2.0rdg + 2dgt) (*) Selection RCD type A/F and type B/B+ available only for Norway country
GS
310 310 310 310 310
OTO+
GS
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
KOTE NOU YE
MACROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 3 of 6
Tès sou latè tester reta flit RCDs (ak RCDX10 akseswar si ou vle)
RCD type: Rated tripping currents (IN):: Line-PE, Line-N voltage: frekans:
AC ( ), A/F ( ), B/B+( ) General (G), Selective (S) and Delayed ( ) 0.3A 10A (type AC, A/F) ; 0.3A 3.0A (type B/B+) 100V 265V RCD type AC and A/F, 190V 265V RCD type B/B+ 50/60Hz 5%
Tester reta flit latè RCDs deklanchman aktyèl (RCD Jeneral)
Kalite RCD
IN
Range IN [mA] Resolution [mA]
Accuracy IN
AC, A/F, B/B+ AC, A/F
300mA IN 1A 1.1A IN 10A
(0.3 1.1) IN
0.1 POUS
– 0%, +5%IN
Tester reta flit latè RCD yo vwayaje soti ranje tan [ms] (sistèm TT/TN)
x 1 / 2
x 1
x 2
x 5
OTO
0.3A
1.0A
1.1A
3.0A
3.1A
6.5A
6.6A
10.0A
GS
GS
GS
AC 999 999 999 999 999 999 200 250
A/F 999 999 999 999 999 999 200 250
B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 200 250 A/F 999 999 999 999 999 999 200 250 B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 200 250 A/F 999 999 999 999 999 999 200 250 B/B+
AC 999 999 999 999 999 999 200 250 A/F 999 999 999 999 999 999 B/B+
G S 50 150 50 150
50 150 50 150
50 150 50 150
GS
G S 310 310 310 310 310
310 310
Resolution: 1ms, Accuracy: (2.0rdg + 2dgt)
Earth leakage delay tester RCDs trip out time range [ms] (IT system) (*)
x 1 / 2
x 1
x 2
x 5
GS
GS
GS
GS
0.3A
3.0A
AC A/F B/B+
999 999 999 999 999 999 200 250 999 999 999 999 999 999 200
50 150 50 150
3.1A
6.5A
AC A/F B/B+
999 999 999 999 999 999 200 250 999 999 999 999 999 999 200
50 150 50 150
6.6A
10.0A
AC A/F B/B+
999 999 999 999 999 999 200 250 999 999 999 999 999 999 200
Resolution: 1ms, Accuracy: (2.0rdg + 2dgt) (*) Selection RCD type A/F and type B/B+ available only for Norway country
AUTO G S
G S 310
310
NoTripTest Non-trip earth loop impedance
Tès voltage:
100265V (Line-PE), 50/60Hz 5%
NoTripTest Systems with Neutral wire
Gamme []
Rezolisyon []
Presizyon (*)
0.01 9.99
0.01
(5 reading + N/10)
10.0 199.9
0.1
(5 reading + N)
200 1999
1
(5 reading + 3N)
(*) If IN <30mA, test current = IN/2 and N[]=30/IN; if IN 30mA, test current <15mA and N=1
NoTripTest Systems without Neutral wire
Gamme []
Rezolisyon []
Presizyon (*)
1 1999
1
-0%, +(5.0 lettura +N)
(*) if IN <30mA, test current = IN/2 and N[]=(10×30)/IN ; If IN 30mA, test current IN/2 and N[]=(3×30)/IN
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
KOTE NOU YE
MACROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 4 of 6
Kontakte voltage (RCD ak NoTripTest)
Ranje [V]
Rezolisyon [V]
0 Utlim
0.1
Kontakte voltage (EARTH test TT system)
Ranje [V]
Rezolisyon [V]
0 99.9
0.1
Kontakte voltage (EARTH test TN system)
Ranje [V]
Rezolisyon [V]
0 99.9
0.1
100 999
1
Rezistans tè ak metòd 3-fil
Gamme []
Rezolisyon []
0.01 9.99
0.01
10.0 99.9
0.1
100 999
1
1.00k 49.99k
0.01k
Tès aktyèl:
<10mA 77.5Hz, Open-circuit voltage: <20Vrms
(*) Ajoute 5% nan presizyon an si rezistans sond yo (Rs oswa Rh) > 100 x Rmeas
Accuracy -0%, +(5.0 rdg + 3V)
Accuracy -0%, +(5.0 rdg + 3V)
Accuracy -0%, +(5.0 rdg + 3V)
Presizyon (*)
(5.0 rdg + 3dgt)
Rezistivite tè a ak metòd Wenner 4-fil
Range [m]
Resolution [m]
0.06 9.99
0.01
10.0 99.9
0.1
100 999
1
1.00k 9.99k
0.01k
10.0k 99.9k
0.1k
100k 999k
1k
1.00M 3.14M
0.01M
(*) with distance d=10m, Distance “d” range:
1 10m
Tès aktyèl:
<10mA 77.5Hz, Open-circuit voltage: <20Vrms
Accuracy (*) (5.0 rdg + 3dgt)
Faz sekans wotasyon ak metòd 1-fil
Voltage ranje PN, P-PE[V]
Gamme frekans
100 265
50Hz/60Hz 5%
Mezi se sèlman te pote soti nan kontak dirèk ak pati metal vivan (pa sou djenn izolasyon)
Voltage drop on main power lines (V%)
Ranje (%)
Rezolisyon (%)
0 100
0.1
Accuracy (10.0 rdg + 4dgt)
Kouran flit (pa HT96U si ou vle clamp transducteur)
Ranje [mA]
Rezolisyon [mA]
0.5 999.9
0.1
Accuracy (5.0 rdg + 2dgt)
Paramèt anviwònman (fonksyon AUX)
Paramèt
Range
Tanperati [°C]
-20 ° C 80 ° C
Tanperati [°F]
-4°F 176°F
Imidite relatif [%HR]
0 100%HR
DC pwodiksyon voltage
0.1mV 1.0V
0.001Lux 20.00 Lux (*)
Ekleraj [Lux]
0.1 Lux 2000 Lux (*)
1 Lux 20 kLux (*)
(*) Presizyon nan pwofonde HT53 lux se dapre klas AA
Resolution 0.1 °C 0.1 °F
0.1% UR 0.1mV
0.001 0.02 Lux 0.1 2 Lux 1 20 Lux
Accuracy (2.0rdg+2dgt)
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
KOTE NOU YE
MACROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 5 of 6
Mezi paramèt prensipal ak Harmony (PQA)
AC TRMS Voltage
Range [V] 15.0 459.9
Allowed crest factor
Resolution [V] 0.1V
1,5 ; Frequency: 42.5 69.0 Hz
Accuracy (1.0rdg + 1dgt)
Frekans
Ranje [Hz]
Rezolisyon [Hz]
42.5 69.0
0.01
Pèmèt voltage: 15.0 459.9V ; Allowed current: 5%FS clamp FS clamp
Accuracy (2.0rdg + 2dgt)
AC TRMS aktyèl
FS clamp
Ranje [A]
10A
5% FS 9.99
10A FS 200
5% FS 199.9
200A FS 3000
5% FS 2999
Range: 5 999.9 mV; Values under 5mV are zeroed
Allowed crest factor
3; Frequency: 42.5 69.0 Hz
Rezolisyon [A] 0.01 0.1 1
Presizyon
1Ph: (1.0rdg + 3 dgt) 3Ph: (2.0rdg + 5 dgt)
Active power (@ 230V in 1Ph systems, 400V in 3Ph systems, cos=1, f=50.0Hz)
FS clamp
Gamme [kW]
Rezolisyon [kW]
Presizyon
10A
0.000 9.999
0.001
10A FS 200
0.00 999.99
0.01
1Ph: (2.0rdg + 5 dgt)
200A FS 1000
0.0 999.9
0.1
3Ph: (2.5rdg + 8 dgt)
1000A FS 3000
0 9999
1
Reactive power (@ 230V in 1Ph systems, 400V in 3Ph systems, cos=0, f=50.0Hz)
FS clamp
Ranje [kVAr]
Rezolisyon [kVAr]
Presizyon
10A
0.000 9.999
0.001
10A FS 200
0.00 999.99
0.01
1Ph: (2.0rdg + 7 dgt)
200A FS 1000
0.0 999.9
0.1
3Ph: (3.0rdg + 8 dgt)
1000A FS 3000
0 9999
1
Faktè pouvwa (@ 230V nan sistèm 1Ph, 400V nan sistèm 3Ph, f = 50.0Hz)
Range
Rezolisyon
Presizyon
0.70c 1.00 0.70i
0.01
(4.0rdg + 10dgt) if I 10%FS (2.0rdg + 3dgt) if I > 10%FS
cos (@ 230V in 1Ph systems, 400V in 3Ph systems, f=50.0Hz)
Range
Rezolisyon
Presizyon
0.70c 1.00 0.70i
0.01
(4.0rdg + 10dgt) if I 10%FS (1.0rdg + 7dgt) if I > 10%FS
Voltage Harmony (@ 230V nan sistèm 1Ph, 400V nan sistèm 3Ph, f = 50.0Hz)
Ranje [%]
Rezolisyon [%]
Lòd
Presizyon
0.1 100.0
0.1
01 25
(5.0rdg + 5dgt)
Frequency of fundamental: 42.5 69.0 Hz, DC accuracy not declared
Harmony aktyèl (f = 50Hz)
Ranje [%]
Rezolisyon [%]
0.1 100.0
0.1
Lòd 01 9 10 17 18 25
Accuracy (5.0rdg + 5dgt) (10.0rdg + 5dgt) (15.0rdg + 10dgt)
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
KOTE NOU YE
MACROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 6 of 6
2. SPECIFICATIONS JENERAL
DISPLAY AND MEMORY: Features: Memory: Communication:
Touch screen, color graphic LCD, 320x240mm 999 locations, 3 marker levels Optical-USB and built-in WiFi
POWER SUPPLY: Batteries: Battery life: Auto Power OFF:
6 x 1.2V(rechargeable) type AA or 6 x 1.5V type AA > 500 test for each function after 5 min of idleness (disabled)
MECHANICAL FEATURES: Dimensions (L x W x H): Weight (included batteries):
WORKING ENVIRONMENTAL CONDITIONS: Reference temperature: Working temperature: Allowed relative humidity: Storage temperature: Storage humidity:
TEST VERIFIES REFERENCE STANDARDS: Continuity test with 200mA: Insulation resistance: Earth resistance: Fault loop impedance: RCD test: Multifunction: Prospective short circuit current: Earth resistance on TN systems:
225 x 165 x 75mm 1.2kg
23°C 5°C 0°C 40°C <80%RH -10°C 60°C <80%RH
IEC/EN61557-4 IEC/EN61557-2 IEC/EN61557-5 IEC/EN61557-3 IEC/EN61557-6 IEC/EN61557-10 EN60909-0 EN61936-1 + EN50522
GENERAL REFERENCE STANDARDS: Safety of measuring instruments: Product type standard: Technical documentation : Insulation: Pollution degree: Encapsulation :
Overvoltage category: Max height of use:
IEC/EN61010-1, IEC/EN61010-031, IEC/EN61010-2-032 IEC/EN61557-1 IEC/EN61187 double insulation 2 IP40
CAT IV 300V (to ground), max 415V between inputs 2000m
Enstriman sa a satisfè egzijans Low Voltage Directive 2014/35/EU (LVD), EMC Directive 2014/35/EU and Directive RED 2014/53/EU
Enstriman sa a satisfè egzijans Ewopeyen Directive 2011/65/EU (RoHS) ak 2012/19/EU (WEEE)
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
KOTE NOU YE
Sèvis EURO-INDEX yo
EURO-INDEX se fabrikan, importateur ak distribitè divès kalite A-merken op het gebied van test-en meetinstrumenten. Daarnaast leveren wij een groot aantal diensten om het gebruik van deze instrumenten in uw bedrijfsvoering te optimiseren. Dit omvat uiteraard onderhoud, reparasyon an kalibratie van de instrumenten, maar ook kennisdeling via de EURO-INDEX Academy ak verhuur van instrumenten.
Geautoriseerd Service Centrum EURO-INDEX bv se pou tout vertegenwoordigde merken yon Geautoriseerd Service Centrum. Dit betekent dat uw instrumenten worden behandeld door technici die zijn opgeleid door de fabrikant in beschikken over de juiste gereedschappen en software. Er worden uitsluitend originele onderdelen toegepast en de garantie van uw instrument, evenals de certificering (ATEX, EN50379, etc.) blijven intact.
Laboratwa Kalibrasyon
Ons moderne service- en kalibratielaboratorium beschikt over een
RvA accreditatie naar NEN-EN-ISO/IEC 17025. Deze accreditatie
geldt voor grootheden, zoals gespecificeerd in de scope bij accreditatienummer K105.
Plis enfòmasyon
Kijk voor een overzicht van al onze diensten op euro-index.nl/diensten
Sèvis Mobil
Naast de vaste kalibratielaboratoria in Capelle aan den IJssel
en Zaventem beschikken wij ook over laboratoria op wielen met
non "Mobiele Service". Dit biedt vertrouwde
service en kwaliteit, bij u voor deur!
Plis enfòmasyon
KWS®
KWS® se yon sèl sistèm sèvis pou ou rankontre enstriman
met periodiek onderhoud en kalibratie tegen vaste, lage kosten.
Uw kalibratiecertificaten zijn digital beschikbaar via Mijn KWS (gratis webpòtal ak aplikasyon).
Plis enfòmasyon
Vèsyon enstriman reyinyon yo
Asòtiman Witgebreid
Nauwkeurigheid aantoonbaar pòt actueel kalibratiecertificaat
Deskundig advies Complete levering inclusief accessoires
Plis enfòmasyon
EURO-INDEX Academy Trainingen (individueel en klassikaal) Cursussen en workshops Demonstratie- en instructievideo’s Whitepapers
Plis enfòmasyon
Sèvisbalye
Onderhoud, reparatie en kalibratie
Kou ak atelye
Sèvis Mobil
Wijzigingen voorbehouden EURO-INDEX® NL 24005
Dokiman / Resous
 |
HT INSTRUMENTS MACROTESTG3 Multifunction Multi Tester [pdfEnstriksyon yo MACROTESTG3 Multifunction Multi Tester, MACROTESTG3, Multifunction Multi Tester, Multi Tester |