HT INSTRUMENTS MACROTESTG3 Multifunction Multi Tester
Awọn pato
- Open-Circuit voltage: 4V si 12V
- Idaabobo idabobo (DC voltage):
- Idanwo voltage [V]
- Ibiti [M]
- Ipinnu [M]
- Yiye
- O pọju idanwo lọwọlọwọ: 5.81A (at 265V); 10.10A (at 457V)
- Idanwo voltage awọn sakani: 100-265V (Line-Neutral) / 100-460V (Line-Line); 50/60Hz ±5%
- Idaabobo aabo: Laini Z (Laini-Laini, Laini-Asoju, Laini-PE)
- Awọn ohun elo idabobo: PVC, Rubber butyl, EPR, XLPE
- First fault current (IT systems):
- Ibiti (mA)
- Ipinu (mA)
- Ifilelẹ olubasọrọ voltage (ULIM): 25V, 50V
Electrical Safety Testing
- Connect the safety tester according to the specified voltage ibiti.
- Select the appropriate insulation resistance test voltage.
- Measure the insulation resistance and ensure it falls within the specified accuracy range.
- Check the maximum test current and ensure it is within the safe limits for testing.
- Perform first fault current tests as required.
Idanwo RCD
- Select the RCD type and rated tripping currents for testing.
- Set the Line-PE and Line-N voltage ni ibamu si awọn pato.
- Perform RCD Molded type tripping time range tests based on the specific RCD type and current settings.
“`
Open-Circuit voltage: Short circuit current: Nominal test current: Safety protection:
nominal test voltage 0% +10% <6.0mA at 500V test voltage
>1mA if load= 1k*Vnom (Vnom=50V, 100V, 250V, 500V, 1000V) the display shows an error message for input voltage >10V
Laini Z (Laini-Laini, Laini-Asoju, Laini-PE)
Ibiti []
Ipinnu []
Yiye
0.00 199.9 m (*) 200 1999 m (*)
0.1 m (*) 1 m (*)
(5.0 rdg + 1m) (*)
0.01 9.99 10.0 199.9
0.01 0.1
(5.0 rdg + 3dgt)
(*) By means of IMP57 optional accessory
O pọju igbeyewo lọwọlọwọ
5.81A (at 265V); 10.10A (at 457V)
Idanwo voltage ranges: Protection type: Insulation materials:
100265V (Line-Neutral) / 100460V (Line-Line); 50/60Hz 5% MCB (B, C, D, K), Fuse (gG, aM) PVC, Rubber butyl, EPR, XLPE
Aṣiṣe lọwọlọwọ lọwọlọwọ (awọn eto IT)
Ibiti (mA)
Ipinu (mA)
0.1 0.9
0.1
1 999
1
Ifilelẹ olubasọrọ voltage (ULIM)
25V, 50V
Accuracy (5.0 rdg + 1dgt) (5.0 rdg + 3dgt)
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
NIBI A WA
MACROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 2 of 6
Idanwo RCD (Iru ọran ti a mọ)
RCD type:
AC ( ), A/F ( ), B/B+( ) General (G), Selective (S) and Delayed ( )
Rated tripping currents (IN)::
6mA, 10mA, 30mA, 100mA, 300mA, 500mA, 650mA, 1000mA
Line-PE, Line-N voltage:
100V 265V RCD type AC and A/F, 190V 265V RCD type B/B+
Igbohunsafẹfẹ:
50/60Hz 5%
RCD tripping current (Molded case type RCD General)
RCD iru
IN
Range IN [mA] Resolution [mA]
AC, A/F, B/B+
6mA, 10mA
AC, A/F, B/B+ 30mA IN 300mA (0.2 1.1) IN
0.1 INU
AC, A/F 500mA IN 650mA
Accuracy IN – 0%, +10%IN
– 0%, +5%IN
RCD Molded type tripping time range [ms] (TT/TN system)
x 1 / 2
x 1
x 2
x 5
AUTO
GS
GS
GS
GS
GS
6mA 10mA 30mA
m
AC 999 999 999 999 999 999 160 210 A/F 999 999 999 999 999 999 160 210 B/B+ 999 999 999 999 999 999 AC 999 999 999 999 999 999 160 210 A/F 999 999 999 999 999 999 160 210 B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 160 210 A/F 999 999 999 999 999 999 160 210
50 150 50 150
50 150 50 150
50 150 50 150
B/B+ 999 999 999 999 999 999 AC 999 999 999 999 999 999 160 210 100mA A/F 999 999 999 999 999 999 160 210
50 150 50 150
B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 160 210 300mA A/F 999 999 999 999 999 999 160 210
B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 160 210
500mA 650mA
A/F
999 999 999 999 999 999 160 210
B/B+
50 150 50 150
50 150
AC 999 999 999 999 999 999 160 210 1000mA A/F 999 999 999 999 999 999
B/B+
Resolution: 1ms, Accuracy: (2.0rdg + 2dgt)
RCD Molded type tripping time range [ms] (IT system) (*)
GS
310 310 310 310 310 310
310 310 310 310 310 310 310 310 310 310 310
AUTO+ G S
x 1 / 2
x 1
x 2
x 5
AUTO
GS
GS
GS
GS
GS
6mA AC 999 999 999 999 999 999 160 210
10mA A/F 999 999 999 999 999 999 160 210
30mA B/B+ 999 999
999 999
100mA 300mA
AC A/F B/B+
999 999 999
999 999 999
999 999
999 999 999
999 999 999
999 999
160 160
210 210
500mA 650mA
AC A/F B/B+
999 999
999 999
999 999
999 999
999 999
999 999
160 160
210 210
50 150 50 150
50 150 50 150
50 150
AC 999 999 1000mA A/F 999 999
B/B+
999 999 999 999
160 210
Resolution: 1ms, Accuracy: (2.0rdg + 2dgt) (*) Selection RCD type A/F and type B/B+ available only for Norway country
GS
310 310 310 310 310
AUTO+
GS
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
NIBI A WA
MACROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 3 of 6
Idanwo lori awọn RCD oluyẹwo idaduro jijo ilẹ (pẹlu ẹya ẹrọ iyan RCDX10)
RCD type: Rated tripping currents (IN):: Line-PE, Line-N voltage: Igbohunsafẹfẹ:
AC ( ), A/F ( ), B/B+( ) General (G), Selective (S) and Delayed ( ) 0.3A 10A (type AC, A/F) ; 0.3A 3.0A (type B/B+) 100V 265V RCD type AC and A/F, 190V 265V RCD type B/B+ 50/60Hz 5%
Idanwo idaduro jijo ile aye RCDs tripping lọwọlọwọ (RCD Gbogbogbo)
RCD iru
IN
Range IN [mA] Resolution [mA]
Accuracy IN
AC, A/F, B/B+ AC, A/F
300mA IN 1A 1.1A IN 10A
(0.3 1.1) IN
0.1NIN
– 0%, +5%IN
Oluyẹwo idaduro jijo ilẹ-aye RCDs jade ni iwọn akoko [ms] (eto TT/TN)
x 1 / 2
x 1
x 2
x 5
AUTO
0.3A
1.0A
1.1A
3.0A
3.1A
6.5A
6.6A
10.0A
GS
GS
GS
AC 999 999 999 999 999 999 200 250
A/F 999 999 999 999 999 999 200 250
B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 200 250 A/F 999 999 999 999 999 999 200 250 B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 200 250 A/F 999 999 999 999 999 999 200 250 B/B+
AC 999 999 999 999 999 999 200 250 A/F 999 999 999 999 999 999 B/B+
G S 50 150 50 150
50 150 50 150
50 150 50 150
GS
G S 310 310 310 310 310
310 310
Resolution: 1ms, Accuracy: (2.0rdg + 2dgt)
Earth leakage delay tester RCDs trip out time range [ms] (IT system) (*)
x 1 / 2
x 1
x 2
x 5
GS
GS
GS
GS
0.3A
3.0A
AC A/F B/B+
999 999 999 999 999 999 200 250 999 999 999 999 999 999 200 250
50 150 50 150
3.1A
6.5A
AC A/F B/B+
999 999 999 999 999 999 200 250 999 999 999 999 999 999 200 250
50 150 50 150
6.6A
10.0A
AC A/F B/B+
999 999 999 999 999 999 200 250 999 999 999 999 999 999 200 250
Resolution: 1ms, Accuracy: (2.0rdg + 2dgt) (*) Selection RCD type A/F and type B/B+ available only for Norway country
AUTO G S
G S 310
310
NoTripTest Non-trip earth loop impedance
Idanwo voltage:
100265V (Line-PE), 50/60Hz 5%
NoTripTest Systems with Neutral wire
Ibiti []
Ipinnu []
Yiye (*)
0.01 9.99
0.01
(5 reading + N/10)
10.0 199.9
0.1
(5 reading + N)
200 1999
1
(5 reading + 3N)
(*) If IN <30mA, test current = IN/2 and N[]=30/IN; if IN 30mA, test current <15mA and N=1
NoTripTest Systems without Neutral wire
Ibiti []
Ipinnu []
Yiye (*)
1 1999
1
-0%, +(5.0 lettura +N)
(*) if IN <30mA, test current = IN/2 and N[]=(10×30)/IN ; If IN 30mA, test current IN/2 and N[]=(3×30)/IN
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
NIBI A WA
MACROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 4 of 6
Olubasọrọ voltage (RCD ati NoTripTest)
Ibiti [V]
Ipinnu [V]
0 Utlim
0.1
Olubasọrọ voltage (EARTH test TT system)
Ibiti [V]
Ipinnu [V]
0 99.9
0.1
Olubasọrọ voltage (EARTH test TN system)
Ibiti [V]
Ipinnu [V]
0 99.9
0.1
100 999
1
Ilẹ resistance pẹlu 3-waya ọna
Ibiti []
Ipinnu []
0.01 9.99
0.01
10.0 99.9
0.1
100 999
1
1.00k 49.99k
0.01k
Idanwo lọwọlọwọ:
<10mA 77.5Hz, Open-circuit voltage: <20Vrms
(*) Ṣafikun 5% si deede ti awọn resistance iwadii (Rs tabi Rh)> 100 x Rmeas
Accuracy -0%, +(5.0 rdg + 3V)
Accuracy -0%, +(5.0 rdg + 3V)
Accuracy -0%, +(5.0 rdg + 3V)
Yiye (*)
(5.0 rdg + 3dgt)
Resistance ile pẹlu 4-waya Wenner ọna
Range [m]
Resolution [m]
0.06 9.99
0.01
10.0 99.9
0.1
100 999
1
1.00k 9.99k
0.01k
10.0k 99.9k
0.1k
100k 999k
1k
1.00M 3.14M
0.01M
(*) with distance d=10m, Distance “d” range:
1 10m
Idanwo lọwọlọwọ:
<10mA 77.5Hz, Open-circuit voltage: <20Vrms
Accuracy (*) (5.0 rdg + 3dgt)
Yiyi ti o tẹle alakoso pẹlu ọna 1-waya
Voltage ibiti PN, P-PE[V]
Iwọn igbohunsafẹfẹ
100 265
50Hz/60Hz 5%
Iwọn wiwọn nikan ni a ṣe nipasẹ olubasọrọ taara pẹlu awọn ẹya gbigbe irin (kii ṣe lori apofẹlẹfẹlẹ idabobo)
Voltage drop on main power lines (V%)
Ibiti (%)
Ipinu (%)
0 100
0.1
Accuracy (10.0 rdg + 4dgt)
Njo lọwọlọwọ (nipasẹ HT96U iyan clamp transducer)
Ibiti [mA]
Ipinnu [mA]
0.5 999.9
0.1
Accuracy (5.0 rdg + 2dgt)
Awọn paramita ayika (iṣẹ AUX)
Paramita
Ibiti o
Iwọn otutu [°C]
-20 ° C 80 ° C
Iwọn otutu [°F]
-4°F 176°F
Ọriniinitutu ibatan [% HR]
0 100%HR
DC o wu voltage
0.1mV 1.0V
0.001Lux 20.00 Lux (*)
Imọlẹ [Lux]
0.1 Lux 2000 Lux (*)
1 Lux 20 kLux (*)
(*) Yiye ti HT53 lux probe ni ibamu si Kilasi AA
Resolution 0.1 °C 0.1 °F
0.1% UR 0.1mV
0.001 0.02 Lux 0.1 2 Lux 1 20 Lux
Accuracy (2.0rdg+2dgt)
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
NIBI A WA
MACROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 5 of 6
Wiwọn awọn paramita akọkọ ati awọn irẹpọ (PQA)
AC TRMS Voltage
Range [V] 15.0 459.9
Allowed crest factor
Resolution [V] 0.1V
1,5 ; Frequency: 42.5 69.0 Hz
Ipeye (1.0rdg + 1dgt)
Igbohunsafẹfẹ
Iwọn [Hz]
Ipinnu [Hz]
42.5 69.0
0.01
Ti gba laaye voltage: 15.0 459.9V ; Allowed current: 5%FS clamp FS clamp
Ipeye (2.0rdg + 2dgt)
AC TRMS Lọwọlọwọ
FS clamp
Ibiti [A]
10A
5% FS 9.99
10A FS 200
5% FS 199.9
200A FS 3000
5% FS 2999
Range: 5 999.9 mV; Values under 5mV are zeroed
Allowed crest factor
3; Frequency: 42.5 69.0 Hz
Ipinnu [A] 0.01 0.1 1
Yiye
1Ph: (1.0rdg + 3 dgt) 3Ph: (2.0rdg + 5 dgt)
Active power (@ 230V in 1Ph systems, 400V in 3Ph systems, cos=1, f=50.0Hz)
FS clamp
Iwọn [kW]
Ipinnu [kW]
Yiye
10A
0.000 9.999
0.001
10A FS 200
0.00 999.99
0.01
1Ph: (2.0rdg + 5 dgt)
200A FS 1000
0.0 999.9
0.1
3Ph: (2.5rdg + 8 dgt)
1000A FS 3000
0 9999
1
Reactive power (@ 230V in 1Ph systems, 400V in 3Ph systems, cos=0, f=50.0Hz)
FS clamp
Iwọn [kVar]
Ipinnu [kVar]
Yiye
10A
0.000 9.999
0.001
10A FS 200
0.00 999.99
0.01
1Ph: (2.0rdg + 7 dgt)
200A FS 1000
0.0 999.9
0.1
3Ph: (3.0rdg + 8 dgt)
1000A FS 3000
0 9999
1
Okunfa agbara (@ 230V ninu awọn ọna ṣiṣe 1Ph, 400V ni awọn eto 3Ph, f=50.0Hz)
Ibiti o
Ipinnu
Yiye
0.70c 1.00 0.70i
0.01
(4.0rdg + 10dgt) if I 10%FS (2.0rdg + 3dgt) if I > 10%FS
cos (@ 230V in 1Ph systems, 400V in 3Ph systems, f=50.0Hz)
Ibiti o
Ipinnu
Yiye
0.70c 1.00 0.70i
0.01
(4.0rdg + 10dgt) if I 10%FS (1.0rdg + 7dgt) if I > 10%FS
Voltage harmonics (@ 230V ninu awọn ọna ṣiṣe 1Ph, 400V ni awọn eto 3Ph, f=50.0Hz)
Ibiti [%]
Ipinnu [%]
Bere fun
Yiye
0.1 100.0
0.1
01 25
(5.0rdg + 5dgt)
Frequency of fundamental: 42.5 69.0 Hz, DC accuracy not declared
Ibaramu lọwọlọwọ (f=50Hz)
Ibiti [%]
Ipinnu [%]
0.1 100.0
0.1
Bere fun 01 9 10 17 18 25
Accuracy (5.0rdg + 5dgt) (10.0rdg + 5dgt) (15.0rdg + 10dgt)
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
NIBI A WA
MACROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 6 of 6
2. AWỌN NIPA AWỌN NIPA
DISPLAY AND MEMORY: Features: Memory: Communication:
Touch screen, color graphic LCD, 320x240mm 999 locations, 3 marker levels Optical-USB and built-in WiFi
POWER SUPPLY: Batteries: Battery life: Auto Power OFF:
6 x 1.2V(rechargeable) type AA or 6 x 1.5V type AA > 500 test for each function after 5 min of idleness (disabled)
MECHANICAL FEATURES: Dimensions (L x W x H): Weight (included batteries):
WORKING ENVIRONMENTAL CONDITIONS: Reference temperature: Working temperature: Allowed relative humidity: Storage temperature: Storage humidity:
TEST VERIFIES REFERENCE STANDARDS: Continuity test with 200mA: Insulation resistance: Earth resistance: Fault loop impedance: RCD test: Multifunction: Prospective short circuit current: Earth resistance on TN systems:
225 x 165 x 75mm 1.2kg
23°C 5°C 0°C 40°C <80%RH -10°C 60°C <80%RH
IEC/EN61557-4 IEC/EN61557-2 IEC/EN61557-5 IEC/EN61557-3 IEC/EN61557-6 IEC/EN61557-10 EN60909-0 EN61936-1 + EN50522
GENERAL REFERENCE STANDARDS: Safety of measuring instruments: Product type standard: Technical documentation : Insulation: Pollution degree: Encapsulation :
Apọjutage category: Max height of use:
IEC/EN61010-1, IEC/EN61010-031, IEC/EN61010-2-032 IEC/EN61557-1 IEC/EN61187 double insulation 2 IP40
CAT IV 300V (to ground), max 415V between inputs 2000m
Irinṣẹ yii ṣe itẹlọrun awọn ibeere ti Low Voltage Directive 2014/35/EU (LVD), EMC Directive 2014/35/EU and Directive RED 2014/53/EU
Ohun elo yii ni itẹlọrun awọn ibeere ti Itọsọna Yuroopu 2011/65/EU (RoHS) ati 2012/19/EU (WEEE)
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
NIBI A WA
Diensten van EURO-INDEX
EURO-INDEX ni fabrikant, importeur en divider van Oniruuru A-merken op het gebied van igbeyewo- en meetinstrumenten. Daarnaast leveren wij een groot aantal diensten om het gebruik van deze instrumenten ni uw bedrijfsvoering te optimaliseren. Dit omvat uiteraard onderhoud, reparatie en kalibratie van de instrumenten, maar ook kennisdeling nipasẹ de EURO-INDEX Academy en verhuur van instrumenten.
Geautoriseerd Service Centrum EURO-INDEX bv jẹ van alle vertegenwoordigde merken ni Geautoriseerd Service Centrum. Dit betekent dat uw instrumenten worden behandeld enu technici die zijn opgeleid enu de fabrikant en beschikken over de juiste gereedschappen en software. Eri worden uitsluitend originele onderdelen toegepast en de garantie van uw irinse, evenals de certificering (ATEX, EN50379, ati be be lo) blijven mule.
Kalibratielaboratorium
Ons moderne iṣẹ- en kalibratielaboratorium beschikt lori een
RvA acreditatie naar NEN-EN-ISO/IEC 17025. Deze accreditatie
geldt voor grootheden, zoals gespecificeerd ni de scope bij accreditatienummer K105.
Alaye diẹ
Kijk voor een overzicht van al onze diensten op euro-index.nl/diensten
Mobile Service
Naast de vaste kalibratielaboratoria ni Capelle aan den IJssel
en Zaventem beschikken wij ook lori laboratoria op wielen pade
de naam "Mobiele Service". Dit biedt vertrouwde
iṣẹ en kwaliteit, bij u voor de deur!
Alaye diẹ
KWS®
KWS® jẹ een uniek servicesysteem voor uw meetinstrumenten
pade periodiek onderhoud en kalibratie tegen vaste, lage kosten.
Uw kalibratiecertificaten zijn digitaal beschikbaar nipasẹ Mijn KWS (gratis webportaal en app).
Alaye diẹ
Verhuur van meetinstrumenten
Uitgebreid orisirisi
Nauwkeurigheid aantoonbaar enu actueel kalibratiecertificaat
Deskundig advies Complete levering inclusief accessoires
Alaye diẹ
EURO-INDEX Academy Trainingen (individueel en klassikaal) Cursussen en workshops Demonstratie- en instructievideo’s Whitepapers
Alaye diẹ
Servicebalie
Onderhoud, reparatie en kalibratie
Cursussen en idanileko
Mobile Service
Wijzigingen voorbehouden EURO-INDEX® NL 24005
Awọn iwe aṣẹ / Awọn orisun
 |
HT INSTRUMENTS MACROTESTG3 Multifunction Multi Tester [pdf] Awọn ilana MACROTESTG3 Multifunction Multi Tester, MACROTESTG3, Multifunction Multi Tester, Multi Tester |