HT INSTRUMENTS MACROTESTG3 Multifunction Multi Tester

Технічні характеристики

  • Відкритий ланцюг обtage: 4В до 12В
  • Опір ізоляції (DC voltagд):
    • Випробувальний томtage [V]
    • Діапазон [M]
    • Resolution [M]
    • Точність
  • Максимальний випробувальний струм: 5.81A (at 265V); 10.10A (at 457V)
  • Випробувальний томtage діапазони: 100-265V (Line-Neutral) / 100-460V (Line-Line); 50/60Hz ±5%
  • Захист безпеки: Лінія Z (лінія-лінія, лінія-нейтраль, лінія-захищене заземлення)
  • Ізоляційні матеріали: PVC, Rubber butyl, EPR, XLPE
  • First fault current (IT systems):
    • Діапазон (мА)
    • Роздільна здатність (мА)
  • Обмежити контакт обtage (ULIM): 25В, 50В

Electrical Safety Testing

  1. Connect the safety tester according to the specified voltagе діапазон.
  2. Select the appropriate insulation resistance test voltage.
  3. Measure the insulation resistance and ensure it falls within the specified accuracy range.
  4. Check the maximum test current and ensure it is within the safe limits for testing.
  5. Perform first fault current tests as required.

Тестування УЗО

  1. Select the RCD type and rated tripping currents for testing.
  2. Set the Line-PE and Line-N voltage відповідно до специфікацій.
  3. Perform RCD Molded type tripping time range tests based on the specific RCD type and current settings.

“`

Відкритий ланцюг обtage: Short circuit current: Nominal test current: Safety protection:

nominal test voltage ­0% +10% <6.0mA at 500V test voltage


>1mA if load= 1k*Vnom (Vnom=50V, 100V, 250V, 500V, 1000V) the display shows an error message for input voltage> 10В

Лінія Z (лінія-лінія, лінія-нейтраль, лінія-захищене заземлення)

діапазон []

Роздільна здатність []

Точність

0.00 199.9 m (*) 200 1999 m (*)

0.1 m (*) 1 m (*)

(5.0 rdg + 1m) (*)

0.01 9.99 10.0 199.9

0.01 0.1

(5.0 rdg + 3dgt)

(*) By means of IMP57 optional accessory

Максимальний випробувальний струм

5.81A (at 265V); 10.10A (at 457V)

Випробувальний томtage ranges: Protection type: Insulation materials:

100265V (Line-Neutral) / 100460V (Line-Line); 50/60Hz 5% MCB (B, C, D, K), Fuse (gG, aM) PVC, Rubber butyl, EPR, XLPE

Струм першого замикання (IT-системи)

Діапазон (мА)

Роздільна здатність (мА)

0.1 0.9

0.1

1 999

1

Обмежити контакт обtage (ULIM) 

25В, 50В

Accuracy (5.0 rdg + 1dgt) (5.0 rdg + 3dgt)

HT ITALIA SRL Via della Boaria, 40 48018 ­ Faenza (RA) ­ Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com

ДЕ МИ Є

МАКРОТЕСТG3
Professional installation safety tester

Rel 2.02 of 26/05/25 Pag 2 of 6

Випробування ПЗВ (литого типу)

RCD type:

AC ( ), A/F ( ), B/B+( ) ­ General (G), Selective (S) and Delayed ( )

Rated tripping currents (IN)::

6 мА, 10 мА, 30 мА, 100 мА, 300 мА, 500 мА, 650 мА, 1000 мА

Лінія-PE, лінія-N томtage:

100V 265V RCD type AC and A/F, 190V 265V RCD type B/B+

Частота:

50/60 Гц 5%

RCD tripping current (Molded case type ­ RCD General)

Тип УЗО

IN

Range IN [mA] Resolution [mA]

AC, A/F, B/B+

6 мА, 10 мА

AC, A/F, B/B+ 30mA IN 300mA (0.2 1.1) IN

0.1 IN

AC, A/F 500mA IN 650mA

Accuracy IN – 0%, +10%IN
– 0%, +5%IN

RCD Molded type tripping time range [ms] (TT/TN system)

x 1 / 2

х 1

х 2

х 5

АВТО

GS

GS

GS

GS

GS

6 мА 10 мА 30 мА

m

AC 999 999 999 999 999 999 160 210 A/F 999 999 999 999 999 999 160 210 B/B+ 999 999 999 999 999 999 AC 999 999 999 999 999 999 160 210 A/F 999 999 999 999 999 999 160 210 B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 160 210 A/F 999 999 999 999 999 999 160 210

50 150 50 150
50 150 50 150
50 150 50 150

B/B+ 999 999 999 999 999 999 AC 999 999 999 999 999 999 160 210 100mA A/F 999 999 999 999 999 999 160 210

50 150 50 150

B/B+ 999 999 999 999 999 999

AC 999 999 999 999 999 999 160 210 300mA A/F 999 999 999 999 999 999 160 210
B/B+ 999 999 999 999 999 999

AC 999 999 999 999 999 999 160 210

500 мА 650 мА

A/F

999 999 999 999 999 999 160 210

B/B+

50 150 50 150
50 150

AC 999 999 999 999 999 999 160 210 1000mA A/F 999 999 999 999 999 999
B/B+

Resolution: 1ms, Accuracy: (2.0rdg + 2dgt)

RCD Molded type tripping time range [ms] (IT system) (*)

GS
310 310 310 310 310 310
310 310 310 310 310 310 310 310 310 310 310

AUTO+ G S

x 1 / 2

х 1

х 2

х 5

АВТО

GS

GS

GS

GS

GS

6mA AC 999 999 999 999 999 999 160 210

10mA A/F 999 999 999 999 999 999 160 210

30mA B/B+ 999 999

999 999

100 мА 300 мА

AC A/F B/B+

999 999 999

999 999 999

999 999

999 999 999

999 999 999

999 999

160 160

210 210

500 мА 650 мА

AC A/F B/B+

999 999

999 999

999 999

999 999

999 999

999 999

160 160

210 210

50 150 50 150
50 150 50 150
50 150

AC 999 999 1000mA A/F 999 999
B/B+

999 999 999 999

160 210

Resolution: 1ms, Accuracy: (2.0rdg + 2dgt) (*) Selection RCD type A/F and type B/B+ available only for Norway country

GS
310 310 310 310 310

АВТО+
GS

HT ITALIA SRL Via della Boaria, 40 48018 ­ Faenza (RA) ­ Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com

ДЕ МИ Є

МАКРОТЕСТG3
Professional installation safety tester

Rel 2.02 of 26/05/25 Pag 3 of 6

Випробування тестером затримки витоку на землю ПЗВ (з додатковим аксесуаром RCDX10)

RCD type: Rated tripping currents (IN):: Line-PE, Line-N voltage: Частота:

AC ( ), A/F ( ), B/B+( ) ­ General (G), Selective (S) and Delayed ( ) 0.3A 10A (type AC, A/F) ; 0.3A 3.0A (type B/B+) 100V 265V RCD type AC and A/F, 190V 265V RCD type B/B+ 50/60Hz 5%

Тестер затримки витоку на землю, струм спрацьовування ПЗВ (RCD General)

Тип УЗО

IN

Range IN [mA] Resolution [mA]

Accuracy IN

AC, A/F, B/B+ AC, A/F

300mA IN 1A 1.1A IN 10A

(0.3 1.1) IN

0.1IN

– 0%, +5%IN

Діапазон часу спрацьовування тестера затримки витоку на землю ПЗВ [мс] (система TT/TN)

x 1 / 2

х 1

х 2

х 5

АВТО

0.3А
1.0А
1.1А
3.0А
3.1А
6.5А
6.6А
10.0А

GS

GS

GS

AC 999 999 999 999 999 999 200 250
A/F 999 999 999 999 999 999 200 250
B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 200 250 A/F 999 999 999 999 999 999 200 250 B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 200 250 A/F 999 999 999 999 999 999 200 250 B/B+

AC 999 999 999 999 999 999 200 250 A/F 999 999 999 999 999 999 B/B+

G S 50 150 50 150
50 150 50 150
50 150 50 150

GS

G S 310 310 310 310 310
310 310

Resolution: 1ms, Accuracy: (2.0rdg + 2dgt)
Earth leakage delay tester RCDs trip out time range [ms] (IT system) (*)

x 1 / 2

х 1

х 2

х 5

GS

GS

GS

GS

0.3А
3.0А

AC A/F B/B+

999 999 999 999 999 999 200 250 999 999 999 999 999 999 200 250 XNUMX

50 150 50 150

3.1А
6.5А

AC A/F B/B+

999 999 999 999 999 999 200 250 999 999 999 999 999 999 200 250 XNUMX

50 150 50 150

6.6А
10.0А

AC A/F B/B+

999 999 999 999 999 999 200 250 999 999 999 999 999 999 200 250 XNUMX

Resolution: 1ms, Accuracy: (2.0rdg + 2dgt) (*) Selection RCD type A/F and type B/B+ available only for Norway country

AUTO G S

G S 310
310

NoTripTest ­ Non-trip earth loop impedance

Випробувальний томtage:

100265V (Line-PE), 50/60Hz 5%

NoTripTest ­ Systems with Neutral wire

діапазон []

Роздільна здатність []

Точність (*)

0.01 9.99

0.01

(5 reading + N/10)

10.0 199.9

0.1

(5 reading + N)

200 1999

1

(5 reading + 3N)

(*) If IN <30mA, test current = IN/2 and N[]=30/IN; if IN 30mA, test current <15mA and N=1

NoTripTest ­ Systems without Neutral wire

діапазон []

Роздільна здатність []

Точність (*)

1 1999

1

-0%, +(5.0 lettura +N)

(*) if IN <30mA, test current = IN/2 and N[]=(10×30)/IN ; If IN 30mA, test current IN/2 and N[]=(3×30)/IN

HT ITALIA SRL Via della Boaria, 40 48018 ­ Faenza (RA) ­ Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com

ДЕ МИ Є

МАКРОТЕСТG3
Professional installation safety tester

Rel 2.02 of 26/05/25 Pag 4 of 6

Контакти тtage (RCD та NoTripTest)

Діапазон [V]

Роздільна здатність [V]

0 Utlim

0.1

Контакти тtage (EARTH test ­ TT system)

Діапазон [V]

Роздільна здатність [V]

0 99.9

0.1

Контакти тtage (EARTH test ­ TN system)

Діапазон [V]

Роздільна здатність [V]

0 99.9

0.1

100 999

1

Опір заземлення за допомогою 3-провідного методу

діапазон []

Роздільна здатність []

0.01 9.99

0.01

10.0 99.9

0.1

100 999

1

1.00 тис. 49.99 тис

0.01 тис

Випробувальний струм:

<10mA ­ 77.5Hz, Open-circuit voltage: < 20 В середньоквадратичного значення

(*) Додайте 5% до точності, якщо опір зонда (Rs або Rh) > 100 x Rmeas

Accuracy -0%, +(5.0 rdg + 3V)
Accuracy -0%, +(5.0 rdg + 3V)
Accuracy -0%, +(5.0 rdg + 3V)
Точність (*)
(5.0 rdg + 3dgt)

Питомий опір ґрунту за 4-провідним методом Веннера

Дальність [м]

Resolution [m]

0.06 9.99

0.01

10.0 99.9

0.1

100 999

1

1.00 тис. 9.99 тис

0.01 тис

10.0 тис. 99.9 тис

0.1 тис

100 тис. 999 тис

1k

1.00M 3.14M

0.01M

(*) with distance d=10m, Distance “d” range:

1 10м

Випробувальний струм:

<10mA ­ 77.5Hz, Open-circuit voltage: < 20 В середньоквадратичного значення

Accuracy (*) (5.0 rdg + 3dgt)

Зміна послідовності фаз за однопровідним методом

томtagдіапазон PN, P-PE[V]

Діапазон частот

100 265

50Hz/60Hz 5%

Вимірювання проводиться лише шляхом безпосереднього контакту з металевими струмоведучими частинами (не на ізоляційній оболонці)

томtage drop on main power lines (V%)

Діапазон (%)

Роздільна здатність (%)

0 100

0.1

Accuracy (10.0 rdg + 4dgt)

Струм витоку (за допомогою додаткового блоку HT96Uamp перетворювач)

Діапазон [мА]

Роздільна здатність [мА]

0.5 999.9

0.1

Accuracy (5.0 rdg + 2dgt)

Параметри навколишнього середовища (функція AUX)

Параметр

Діапазон

Температура [°C]

-20°C 80°C

Температура [°F]

-4°F 176°F

Відносна вологість [% відн. вологості]

0 100%HR

Вихідний струм обtage

0.1 мВ 1.0 В

0.001Lux 20.00 Lux (*)

Освітленість [Люкс]

0.1 Lux 2000 Lux (*)

1 Lux 20 kLux (*)

(*) Точність датчика освітленості HT53 відповідає класу AA

Resolution 0.1 °C 0.1 °F
0.1% UR 0.1mV
0.001 0.02 Lux 0.1 2 Lux 1 20 Lux

Accuracy (2.0rdg+2dgt)

HT ITALIA SRL Via della Boaria, 40 48018 ­ Faenza (RA) ­ Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com

ДЕ МИ Є

МАКРОТЕСТG3
Professional installation safety tester

Rel 2.02 of 26/05/25 Pag 5 of 6

Вимірювання основних параметрів та гармонік (PQA)

AC TRMS Voltage
Range [V] 15.0 459.9
Allowed crest factor

Resolution [V] 0.1V
1,5 ; Frequency: 42.5 69.0 Hz

Accuracy (1.0rdg + 1dgt)

Частота

Діапазон [Гц]

Роздільна здатність [Гц]

42.5 69.0

0.01

Дозволено обtage: 15.0 459.9V ; Allowed current: 5%FS clamp FS clamp

Accuracy (2.0rdg + 2dgt)

AC TRMS струм

FS clamp

Діапазон [A]

10А

5% FS 9.99

10A FS 200

5% FS 199.9

200A FS 3000

5% FS 2999

Range: 5 999.9 mV; Values under 5mV are zeroed

Allowed crest factor

3; Frequency: 42.5 69.0 Hz

Роздільна здатність [A] 0.01 0.1 1

Точність
1Ph: (1.0rdg + 3 dgt) 3Ph: (2.0rdg + 5 dgt)

Active power (@ 230V in 1Ph systems, 400V in 3Ph systems, cos=1, f=50.0Hz)

FS clamp

Діапазон [кВт]

Роздільна здатність [кВт]

Точність

10А

0.000 9.999

0.001

10A FS 200

0.00 999.99

0.01

1Ph: (2.0rdg + 5 dgt)

200A FS 1000

0.0 999.9

0.1

3Ph: (2.5rdg + 8 dgt)

1000A FS 3000

0 9999

1

Reactive power (@ 230V in 1Ph systems, 400V in 3Ph systems, cos=0, f=50.0Hz)

FS clamp

Діапазон [кВАр]

Роздільна здатність [кВАр]

Точність

10А

0.000 9.999

0.001

10A FS 200

0.00 999.99

0.01

1Ph: (2.0rdg + 7 dgt)

200A FS 1000

0.0 999.9

0.1

3Ph: (3.0rdg + 8 dgt)

1000A FS 3000

0 9999

1

Коефіцієнт потужності (при 230 В в 1-фазних системах, 400 В в 3-фазних системах, f = 50.0 Гц)

Діапазон

роздільна здатність

Точність

0.70c 1.00 0.70i

0.01

(4.0rdg + 10dgt) if I 10%FS (2.0rdg + 3dgt) if I > 10%FS

cos (@ 230V in 1Ph systems, 400V in 3Ph systems, f=50.0Hz)

Діапазон

роздільна здатність

Точність

0.70c 1.00 0.70i

0.01

(4.0rdg + 10dgt) if I 10%FS (1.0rdg + 7dgt) if I > 10%FS

томtagгармоніки (при напрузі 230 В в однофазних системах, 1 В в трифазних системах, f = 400 Гц)

Діапазон [%]

Роздільна здатність [%]

порядок

Точність

0.1 100.0

0.1

01 25

(5.0rdg + 5dgt)

Frequency of fundamental: 42.5 69.0 Hz, DC accuracy not declared

Гармоніки струму (f=50 Гц)

Діапазон [%]

Роздільна здатність [%]

0.1 100.0

0.1

Замовлення 01 9 10 17 18 25

Accuracy (5.0rdg + 5dgt) (10.0rdg + 5dgt) (15.0rdg + 10dgt)

HT ITALIA SRL Via della Boaria, 40 48018 ­ Faenza (RA) ­ Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com

ДЕ МИ Є

МАКРОТЕСТG3
Professional installation safety tester

Rel 2.02 of 26/05/25 Pag 6 of 6

2. ЗАГАЛЬНІ ТЕХНІЧНІ ХАРАКТЕРИСТИКИ

DISPLAY AND MEMORY: Features: Memory: Communication:

Touch screen, color graphic LCD, 320x240mm 999 locations, 3 marker levels Optical-USB and built-in WiFi

POWER SUPPLY: Batteries: Battery life: Auto Power OFF:

6 x 1.2V(rechargeable) type AA or 6 x 1.5V type AA > 500 test for each function after 5 min of idleness (disabled)

MECHANICAL FEATURES: Dimensions (L x W x H): Weight (included batteries):
WORKING ENVIRONMENTAL CONDITIONS: Reference temperature: Working temperature: Allowed relative humidity: Storage temperature: Storage humidity:
TEST VERIFIES REFERENCE STANDARDS: Continuity test with 200mA: Insulation resistance: Earth resistance: Fault loop impedance: RCD test: Multifunction: Prospective short circuit current: Earth resistance on TN systems:

225 х 165 х 75 мм 1.2 кг
23°C 5°C 0°C 40°C <80%RH -10°C 60°C <80%RH
IEC/EN61557-4 IEC/EN61557-2 IEC/EN61557-5 IEC/EN61557-3 IEC/EN61557-6 IEC/EN61557-10 EN60909-0 EN61936-1 + EN50522

GENERAL REFERENCE STANDARDS: Safety of measuring instruments: Product type standard: Technical documentation : Insulation: Pollution degree: Encapsulation :
Переволtage category: Max height of use:

IEC/EN61010-1, IEC/EN61010-031, IEC/EN61010-2-032 IEC/EN61557-1 IEC/EN61187 double insulation 2 IP40
CAT IV 300V (to ground), max 415V between inputs 2000m

Цей інструмент задовольняє вимогам Low Voltage Directive 2014/35/EU (LVD), EMC Directive 2014/35/EU and Directive RED 2014/53/EU
Цей прилад відповідає вимогам Європейської Директиви 2011/65/EU (RoHS) та 2012/19/EU (WEEE)

HT ITALIA SRL Via della Boaria, 40 48018 ­ Faenza (RA) ­ Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com

ДЕ МИ Є

Послуги EURO-INDEX

EURO-INDEX is fabrikant, importeur en distributeur van diverse A-merken op het gebied van test- en meetinstrumenten. Daarnaast leveren wij een groot aantal diensten om het gebruik van deze instrumenten in uw bedrijfsvoering te optimaliseren. Dit omvat uiteraard onderhoud, reparatie en kalibratie van de instrumenten, maar ook kennisdeling via de EURO-INDEX Academy en verhuur van instrumenten.

Geautoriseerd Service Centrum EURO-INDEX b.v. is van alle vertegenwoordigde merken een Geautoriseerd Service Centrum. Dit betekent dat uw instrumenten worden behandeld door technici die zijn opgeleid door de fabrikant en beschikken over de juiste gereedschappen en software. Er worden uitsluitend originele onderdelen toegepast en de garantie van uw instrument, evenals de certificering (ATEX, EN50379, etc.) blijven intact.

Kalibratielaboratorium

Ons moderne service- en kalibratielaboratorium beschikt over een

RvA accreditatie naar NEN-EN-ISO/IEC 17025. Deze accreditatie

geldt voor grootheden, zoals gespecificeerd in de scope bij accreditatienummer K105.

Meer info

Kijk voor een overzicht van al onze diensten op euro-index.nl/diensten

Mobiele Service

Naast de vaste kalibratielaboratoria in Capelle aan den IJssel

en Zaventem beschikken wij ook over laboratoria op wielen met

de naam “Mobiele Service”. Dit biedt vertrouwde

service en kwaliteit, bij u voor de deur!

Meer info

KWS®

KWS® is een uniek servicesysteem voor uw meetinstrumenten

met periodiek onderhoud en kalibratie tegen vaste, lage kosten.

Uw kalibratiecertificaten zijn digitaal beschikbaar via Mijn KWS (gratis webportaal en app).

Meer info

Verhuur van meetinstrumenten

Uitgebreid assortiment

Nauwkeurigheid aantoonbaar door actueel kalibratiecertificaat

Deskundig advies Complete levering inclusief accessoires

Meer info

EURO-INDEX Academy Trainingen (individueel en klassikaal) Cursussen en workshops Demonstratie- en instructievideo’s Whitepapers

Meer info

Servicebalie

Onderhoud, reparatie en kalibratie

Cursussen en workshops

Mobiele Service

Wijzigingen voorbehouden EURO-INDEX® NL 24005

Документи / Ресурси

HT INSTRUMENTS MACROTESTG3 Multifunction Multi Tester [pdfІнструкції
MACROTESTG3 Multifunction Multi Tester, MACROTESTG3, Multifunction Multi Tester, Multi Tester

Список літератури

Залиште коментар

Ваша електронна адреса не буде опублікована. Обов'язкові поля позначені *