HT INSTRUMENTS MACROTESTG3 Multifunction Multi Tester
Zehaztapenak
- Zirkuitu irekiko boltage: 4V-tik 12V-ra
- Isolamendu-erresistentzia (DC voltage):
- Test voltage [V]
- Barrutia [M]
- Bereizmena [M]
- Zehaztasuna
- Proba korronte maximoa: 5.81A (at 265V); 10.10A (at 457V)
- Test voltage barrutiak: 100-265V (Line-Neutral) / 100-460V (Line-Line); 50/60Hz ±5%
- Segurtasun babesa: Z lerroa (lerro-lerroa, marra-neutroa, lerroa-PE)
- Isolamendu materialak: PVC, Rubber butyl, EPR, XLPE
- First fault current (IT systems):
- Barrutia (mA)
- Ebazpena (mA)
- Mugatu kontaktua voltage (ULIM): 25 V, 50 V
Electrical Safety Testing
- Connect the safety tester according to the specified voltagbarrutia.
- Select the appropriate insulation resistance test voltage.
- Measure the insulation resistance and ensure it falls within the specified accuracy range.
- Check the maximum test current and ensure it is within the safe limits for testing.
- Perform first fault current tests as required.
RCD probak
- Select the RCD type and rated tripping currents for testing.
- Set the Line-PE and Line-N voltage zehaztapenen arabera.
- Perform RCD Molded type tripping time range tests based on the specific RCD type and current settings.
“`
Zirkuitu irekiko boltage: Short circuit current: Nominal test current: Safety protection:
nominal test voltage 0% +10% <6.0mA at 500V test voltage
>1mA if load= 1k*Vnom (Vnom=50V, 100V, 250V, 500V, 1000V) the display shows an error message for input voltage > 10V
Z lerroa (lerro-lerroa, marra-neutroa, lerroa-PE)
Barrutia []
Ebazpena []
Zehaztasuna
0.00 199.9 m (*) 200 1999 m (*)
0.1 m (*) 1 m (*)
(5.0 rdg + 1m) (*)
0.01 9.99 10.0 199.9
0.01 0.1
(5.0 rdg + 3dgt)
(*) By means of IMP57 optional accessory
Proba-korronte maximoa
5.81A (at 265V); 10.10A (at 457V)
Test voltage ranges: Protection type: Insulation materials:
100265V (Line-Neutral) / 100460V (Line-Line); 50/60Hz 5% MCB (B, C, D, K), Fuse (gG, aM) PVC, Rubber butyl, EPR, XLPE
Lehen matxura-korrontea (IT sistemak)
Barrutia (mA)
Ebazpena (mA)
0.1 0.9
0.1
1 999
1
Mugatu kontaktua voltage (ULIM)
25 V, 50 V
Accuracy (5.0 rdg + 1dgt) (5.0 rdg + 3dgt)
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
NON GAUDEN
MAKROTESG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 2 of 6
RCD proba (moldeatutako kasu mota)
RCD type:
AC ( ), A/F ( ), B/B+( ) General (G), Selective (S) and Delayed ( )
Rated tripping currents (IN)::
6mA, 10mA, 30mA, 100mA, 300mA, 500mA, 650mA, 1000mA
Line-PE, Line-N voltage:
100V 265V RCD type AC and A/F, 190V 265V RCD type B/B+
Maiztasuna:
50/60Hz %5
RCD tripping current (Molded case type RCD General)
RCD mota
IN
Range IN [mA] Resolution [mA]
AC, A/F, B/B+
6mA, 10mA
AC, A/F, B/B+ 30mA IN 300mA (0.2 1.1) IN
0.1 IN
AC, A/F 500mA IN 650mA
Accuracy IN – 0%, +10%IN
– 0%, +5%IN
RCD Molded type tripping time range [ms] (TT/TN system)
x 1 / 2
x 1
x 2
x 5
AUTO
GS
GS
GS
GS
GS
6mA 10mA 30mA
m
AC 999 999 999 999 999 999 160 210 A/F 999 999 999 999 999 999 160 210 B/B+ 999 999 999 999 999 999 AC 999 999 999 999 999 999 160 210 A/F 999 999 999 999 999 999 160 210 B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 160 210 A/F 999 999 999 999 999 999 160 210
50 150 50 150
50 150 50 150
50 150 50 150
B/B+ 999 999 999 999 999 999 AC 999 999 999 999 999 999 160 210 100mA A/F 999 999 999 999 999 999 160 210
50 150 50 150
B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 160 210 300mA A/F 999 999 999 999 999 999 160 210
B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 160 210
500mA 650mA
A/F
999 999 999 999 999 999 160 210
B/B+
50 150 50 150
50 150
AC 999 999 999 999 999 999 160 210 1000mA A/F 999 999 999 999 999 999
B/B+
Resolution: 1ms, Accuracy: (2.0rdg + 2dgt)
RCD Molded type tripping time range [ms] (IT system) (*)
GS
310 310 310 310 310 310
310 310 310 310 310 310 310 310 310 310 310
AUTO+ G S
x 1 / 2
x 1
x 2
x 5
AUTO
GS
GS
GS
GS
GS
6mA AC 999 999 999 999 999 999 160 210
10mA A/F 999 999 999 999 999 999 160 210
30mA B/B+ 999 999
999 999
100mA 300mA
AC A/F B/B+
999 999 999
999 999 999
999 999
999 999 999
999 999 999
999 999
160 160
210 210
500mA 650mA
AC A/F B/B+
999 999
999 999
999 999
999 999
999 999
999 999
160 160
210 210
50 150 50 150
50 150 50 150
50 150
AC 999 999 1000mA A/F 999 999
B/B+
999 999 999 999
160 210
Resolution: 1ms, Accuracy: (2.0rdg + 2dgt) (*) Selection RCD type A/F and type B/B+ available only for Norway country
GS
310 310 310 310 310
AUTO+
GS
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
NON GAUDEN
MAKROTESG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 3 of 6
Lur-isuri-atzerapen-probagailuen probako RCDetan (RCDX10 aukerako osagarriarekin)
RCD type: Rated tripping currents (IN):: Line-PE, Line-N voltage: Maiztasuna:
AC ( ), A/F ( ), B/B+( ) General (G), Selective (S) and Delayed ( ) 0.3A 10A (type AC, A/F) ; 0.3A 3.0A (type B/B+) 100V 265V RCD type AC and A/F, 190V 265V RCD type B/B+ 50/60Hz 5%
Lurraren ihesaren atzerapen-probatzailea RCD-ak abiarazte-korrontea (RCD Orokorra)
RCD mota
IN
Range IN [mA] Resolution [mA]
Accuracy IN
AC, A/F, B/B+ AC, A/F
300mA IN 1A 1.1A IN 10A
(0.3 1.1) IN
0.1IN
– 0%, +5%IN
Lur-isuriaren atzerapena probatzeko RCDek irteteko denbora tartea [ms] (TT/TN sistema)
x 1 / 2
x 1
x 2
x 5
AUTO
0.3A
1.0A
1.1A
3.0A
3.1A
6.5A
6.6A
10.0A
GS
GS
GS
AC 999 999 999 999 999 999 200 250
A/F 999 999 999 999 999 999 200 250
B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 200 250 A/F 999 999 999 999 999 999 200 250 B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 200 250 A/F 999 999 999 999 999 999 200 250 B/B+
AC 999 999 999 999 999 999 200 250 A/F 999 999 999 999 999 999 B/B+
G S 50 150 50 150
50 150 50 150
50 150 50 150
GS
G S 310 310 310 310 310
310 310
Resolution: 1ms, Accuracy: (2.0rdg + 2dgt)
Earth leakage delay tester RCDs trip out time range [ms] (IT system) (*)
x 1 / 2
x 1
x 2
x 5
GS
GS
GS
GS
0.3A
3.0A
AC A/F B/B+
999 999 999 999 999 999 200 250 999 999 999 999 999 999 200 250
50 150 50 150
3.1A
6.5A
AC A/F B/B+
999 999 999 999 999 999 200 250 999 999 999 999 999 999 200 250
50 150 50 150
6.6A
10.0A
AC A/F B/B+
999 999 999 999 999 999 200 250 999 999 999 999 999 999 200 250
Resolution: 1ms, Accuracy: (2.0rdg + 2dgt) (*) Selection RCD type A/F and type B/B+ available only for Norway country
AUTO G S
G S 310
310
NoTripTest Non-trip earth loop impedance
Test voltage:
100265V (Line-PE), 50/60Hz 5%
NoTripTest Systems with Neutral wire
Barrutia []
Ebazpena []
Zehaztasuna (*)
0.01 9.99
0.01
(5 reading + N/10)
10.0 199.9
0.1
(5 reading + N)
200 1999
1
(5 reading + 3N)
(*) If IN <30mA, test current = IN/2 and N[]=30/IN; if IN 30mA, test current <15mA and N=1
NoTripTest Systems without Neutral wire
Barrutia []
Ebazpena []
Zehaztasuna (*)
1 1999
1
-0%, +(5.0 lettura +N)
(*) if IN <30mA, test current = IN/2 and N[]=(10×30)/IN ; If IN 30mA, test current IN/2 and N[]=(3×30)/IN
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
NON GAUDEN
MAKROTESG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 4 of 6
Harremanetarako voltage (RCD eta NoTripTest)
Barrutia [V]
Ebazpena [V]
0 Utlim
0.1
Harremanetarako voltage (EARTH test TT system)
Barrutia [V]
Ebazpena [V]
0 99.9
0.1
Harremanetarako voltage (EARTH test TN system)
Barrutia [V]
Ebazpena [V]
0 99.9
0.1
100 999
1
Lurraren erresistentzia 3 hari metodoarekin
Barrutia []
Ebazpena []
0.01 9.99
0.01
10.0 99.9
0.1
100 999
1
1.00k 49.99k
0.01k
Proba korrontea:
<10mA 77.5Hz, Open-circuit voltage: < 20Vrms
(*) Gehitu % 5 zehaztasunari zunda-erresistentziak (Rs edo Rh) > 100 x Rmeas baldin badira
Accuracy -0%, +(5.0 rdg + 3V)
Accuracy -0%, +(5.0 rdg + 3V)
Accuracy -0%, +(5.0 rdg + 3V)
Zehaztasuna (*)
(5.0 rdg + 3dgt)
Lurzoruaren erresistentzia 4 hari Wenner metodoarekin
Range [m]
Resolution [m]
0.06 9.99
0.01
10.0 99.9
0.1
100 999
1
1.00k 9.99k
0.01k
10.0k 99.9k
0.1k
100k 999k
1k
1.00 M 3.14 M
0.01M
(*) with distance d=10m, Distance “d” range:
1 10 m
Proba korrontea:
<10mA 77.5Hz, Open-circuit voltage: < 20Vrms
Accuracy (*) (5.0 rdg + 3dgt)
Fase-sekuentziaren biraketa hari bakarreko metodoarekin
liburukiatage sorta PN, P-PE[V]
Maiztasun tartea
100 265
50Hz/60Hz 5%
Neurketa zuzeneko pieza metalikoekin kontaktuan soilik egiten da (ez isolamendu-zorroan)
liburukiatage drop on main power lines (V%)
Barrutia (%)
Ebazpena (%)
0 100
0.1
Accuracy (10.0 rdg + 4dgt)
Ihes-korrontea (HT96U aukerakoa clamp transduktorea)
Barrutia [mA]
Ebazpena [mA]
0.5 999.9
0.1
Accuracy (5.0 rdg + 2dgt)
Ingurumen-parametroak (AUX funtzioa)
Parametroa
Barrutia
Tenperatura [°C]
-20°C 80°C
Tenperatura [°F]
-4 °F 176 °F
Hezetasun erlatiboa [%HR]
0 100%HR
DC irteera boltage
0.1mV 1.0V
0.001Lux 20.00 Lux (*)
Argiztapena [Lux]
0.1 Lux 2000 Lux (*)
1 Lux 20 kLux (*)
(*) HT53 lux zundaren zehaztasuna AA Klasearen araberakoa da
Resolution 0.1 °C 0.1 °F
0.1% UR 0.1mV
0.001 0.02 Lux 0.1 2 Lux 1 20 Lux
Accuracy (2.0rdg+2dgt)
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
NON GAUDEN
MAKROTESG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 5 of 6
Parametro eta harmoniko nagusien neurketa (PQA)
AC TRMS Voltage
Range [V] 15.0 459.9
Allowed crest factor
Resolution [V] 0.1V
1,5 ; Frequency: 42.5 69.0 Hz
Zehaztasuna (1.0 err + 1 zirri)
Maiztasuna
Barrutia [Hz]
Bereizmena [Hz]
42.5 69.0
0.01
Baimendutako voltage: 15.0 459.9V ; Allowed current: 5%FS clamp FS clamp
Zehaztasuna (2.0 err + 2 zirri)
AC TRMS Korrontea
FS clamp
[A] barrutia
10A
5% FS 9.99
10A FS 200
5% FS 199.9
200A FS 3000
5% FS 2999
Range: 5 999.9 mV; Values under 5mV are zeroed
Allowed crest factor
3; Frequency: 42.5 69.0 Hz
Ebazpena [A] 0.01 0.1 1
Zehaztasuna
1Ph: (1.0rdg + 3 dgt) 3Ph: (2.0rdg + 5 dgt)
Active power (@ 230V in 1Ph systems, 400V in 3Ph systems, cos=1, f=50.0Hz)
FS clamp
Gama [kW]
Bereizmena [kW]
Zehaztasuna
10A
0.000 9.999
0.001
10A FS 200
0.00 999.99
0.01
1Ph: (2.0rdg + 5 dgt)
200A FS 1000
0.0 999.9
0.1
3Ph: (2.5rdg + 8 dgt)
1000A FS 3000
0 9999
1
Reactive power (@ 230V in 1Ph systems, 400V in 3Ph systems, cos=0, f=50.0Hz)
FS clamp
Barrutia [kVAr]
Ebazpena [kVAr]
Zehaztasuna
10A
0.000 9.999
0.001
10A FS 200
0.00 999.99
0.01
1Ph: (2.0rdg + 7 dgt)
200A FS 1000
0.0 999.9
0.1
3Ph: (3.0rdg + 8 dgt)
1000A FS 3000
0 9999
1
Potentzia-faktorea (@ 230V 1Ph sistemetan, 400V 3Ph sistemetan, f=50.0Hz)
Barrutia
Ebazpena
Zehaztasuna
0.70c 1.00 0.70i
0.01
(4.0rdg + 10dgt) if I 10%FS (2.0rdg + 3dgt) if I > 10%FS
cos (@ 230V in 1Ph systems, 400V in 3Ph systems, f=50.0Hz)
Barrutia
Ebazpena
Zehaztasuna
0.70c 1.00 0.70i
0.01
(4.0rdg + 10dgt) if I 10%FS (1.0rdg + 7dgt) if I > 10%FS
liburukiatage harmonikoak (@ 230V 1Ph sistemetan, 400V 3Ph sistemetan, f=50.0Hz)
Barrutia [%]
Ebazpena [%]
Agindu
Zehaztasuna
0.1 100.0
0.1
01 25
(5.0 ertz + 5 ertz)
Frequency of fundamental: 42.5 69.0 Hz, DC accuracy not declared
Korronte harmonikoak (f=50Hz)
Barrutia [%]
Ebazpena [%]
0.1 100.0
0.1
Agindu 01 9 10 17 18 25
Accuracy (5.0rdg + 5dgt) (10.0rdg + 5dgt) (15.0rdg + 10dgt)
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
NON GAUDEN
MAKROTESG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 6 of 6
2. ZEHAZTAPEN OROKORRAK
DISPLAY AND MEMORY: Features: Memory: Communication:
Touch screen, color graphic LCD, 320x240mm 999 locations, 3 marker levels Optical-USB and built-in WiFi
POWER SUPPLY: Batteries: Battery life: Auto Power OFF:
6 x 1.2V(rechargeable) type AA or 6 x 1.5V type AA > 500 test for each function after 5 min of idleness (disabled)
MECHANICAL FEATURES: Dimensions (L x W x H): Weight (included batteries):
WORKING ENVIRONMENTAL CONDITIONS: Reference temperature: Working temperature: Allowed relative humidity: Storage temperature: Storage humidity:
TEST VERIFIES REFERENCE STANDARDS: Continuity test with 200mA: Insulation resistance: Earth resistance: Fault loop impedance: RCD test: Multifunction: Prospective short circuit current: Earth resistance on TN systems:
225 x 165 x 75 mm 1.2 kg
23°C 5°C 0°C 40°C <80%RH -10°C 60°C <80%RH
IEC/EN61557-4 IEC/EN61557-2 IEC/EN61557-5 IEC/EN61557-3 IEC/EN61557-6 IEC/EN61557-10 EN60909-0 EN61936-1 + EN50522
GENERAL REFERENCE STANDARDS: Safety of measuring instruments: Product type standard: Technical documentation : Insulation: Pollution degree: Encapsulation :
Overboltage category: Max height of use:
IEC/EN61010-1, IEC/EN61010-031, IEC/EN61010-2-032 IEC/EN61557-1 IEC/EN61187 double insulation 2 IP40
CAT IV 300V (to ground), max 415V between inputs 2000m
Tresna honek Low Vol.-ren eskakizunak betetzen ditutage Directive 2014/35/EU (LVD), EMC Directive 2014/35/EU and Directive RED 2014/53/EU
Tresna honek 2011/65/EU (RoHS) eta 2012/19/EB (WEEE) Europako Zuzentarauaren baldintzak betetzen ditu.
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
NON GAUDEN
EURO-INDEXeko zerbitzuak
EURO-INDEX fabrikant, importator en distributeur van different A-merken op het gebied van test- en meetinstrumenten. Daarnaast leveren wij een groot aantal diensten om het gebruik van deze instrumenten in uw bedrijfsvoering te optimiseren. Hau da, tresnaren kalibrazioa erreparatu eta EURO-INDEX Academy-ren bitartez tresnaren bitartez.
Geautoriseerd Service Centrum EURO-INDEX bv Geautoriseerd Service Centrum da. Dit betekent dat uw instrumenten worden behandeld door technici die zijn opgeleid door de fabrikant in beschikken over de juiste gereedschappen en software. Er worden uitsluitend originele onderdelen toegepast en de garantie van uw instrument, evenals de certificering (ATEX, EN50379, etc.) blijven intact.
Kalibrazio-laborategia
Ons moderne service- en kalibratielaboratorium beschikt over een
RvA akreditazioa NEN-EN-ISO/IEC 17025. Ez ezazu akreditazioa.
Geldt voor grootheden, zoals gespecificeerd in de scope bij accreditatienummer K105.
Informazio gehiago
Kijk voor een overzicht van al onze diensten op euro-index.nl/diensten
Mugikor Zerbitzua
Naast de vaste kalibratielaboratoria in Capelle aan den IJssel
eu Zaventem beschikken wij ook over laboratoria op wielen met
izena duen “Mobiele Zerbitzua”. Dit biedt vertrouwde
service en kwaliteit, bij u voor deur!
Informazio gehiago
KWS®
KWS® zerbitzuen sistema bat da eta tresnak topatzeko
met periodiek onderhoud en kalibratie tegen vaste, lage kosten.
Uw kalibratiecertificaten zijn digital beschikbaar Mijn KWS bidez (gratis webataria eta aplikazioa).
Informazio gehiago
Bilera-tresnen erabilera
Uitgebreid sorta
Nauwkeurigheid aantoonbaar atea actueel kalibratiecertificaat
Deskundig advies Complete levering inclusief accessoires
Informazio gehiago
EURO-INDEX Academy Trainingen (individueel en klassikaal) Cursussen en workshops Demonstratie- en instructievideo’s Whitepapers
Informazio gehiago
Zerbitzu-balia
Onderhoud, reparatie en kalibratie
Ikastaroak eta tailerrak
Mugikor Zerbitzua
Wijzigingen voorbehouden EURO-INDEX® NL 24005
Dokumentuak / Baliabideak
 |
HT INSTRUMENTS MACROTESTG3 Multifunction Multi Tester [pdfArgibideak MACROTESTG3 Multifunction Multi Tester, MACROTESTG3, Multifunction Multi Tester, Multi Tester |