HT INSTRUMENTS MACROTESTG3 Multifunction Multi Tester
Manylebau
- Cylched agored voltage: 4V i 12V
- Gwrthiant inswleiddio (cyf. DCtage):
- Prawf cyftage [V]
- Ystod [M]
- Resolution [M]
- Cywirdeb
- Uchafswm cyfredol prawf: 5.81A (at 265V); 10.10A (at 457V)
- Prawf cyftage ystodau: 100-265V (Line-Neutral) / 100-460V (Line-Line); 50/60Hz ±5%
- Diogelu diogelwch: Llinell Z (Llinell-Llinell, Llinell-Niwtral, Llinell-PE)
- Deunyddiau inswleiddio: PVC, Rubber butyl, EPR, XLPE
- First fault current (IT systems):
- Ystod (mA)
- Datrysiad (mA)
- Cyfyngu cyswllt cyftage (ULIM): 25V, 50V
Electrical Safety Testing
- Connect the safety tester according to the specified voltage amrediad.
- Select the appropriate insulation resistance test voltage.
- Measure the insulation resistance and ensure it falls within the specified accuracy range.
- Check the maximum test current and ensure it is within the safe limits for testing.
- Perform first fault current tests as required.
Profi RCD
- Select the RCD type and rated tripping currents for testing.
- Set the Line-PE and Line-N voltage yn ôl y manylebau.
- Perform RCD Molded type tripping time range tests based on the specific RCD type and current settings.
“`
Cylched agored voltage: Short circuit current: Nominal test current: Safety protection:
nominal test voltage 0% +10% <6.0mA at 500V test voltage
>1mA if load= 1k*Vnom (Vnom=50V, 100V, 250V, 500V, 1000V) the display shows an error message for input voltage> 10V
Llinell Z (Llinell-Llinell, Llinell-Niwtral, Llinell-PE)
Ystod []
Penderfyniad []
Cywirdeb
0.00 199.9 m (*) 200 1999 m (*)
0.1 m (*) 1 m (*)
(5.0 rdg + 1m) (*)
0.01 9.99 10.0 199.9
0.01 0.1
(5.0 rdg + 3dgt)
(*) By means of IMP57 optional accessory
Uchafswm cerrynt prawf
5.81A (at 265V); 10.10A (at 457V)
Prawf cyftage ranges: Protection type: Insulation materials:
100265V (Line-Neutral) / 100460V (Line-Line); 50/60Hz 5% MCB (B, C, D, K), Fuse (gG, aM) PVC, Rubber butyl, EPR, XLPE
Cerrynt nam cyntaf (systemau TG)
Ystod (mA)
Datrysiad (mA)
0.1 0.9
0.1
1 999
1
Cyfyngu cyswllt cyftage (ULIM)
25V, 50V
Accuracy (5.0 rdg + 1dgt) (5.0 rdg + 3dgt)
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
LLE YDYM NI
MACROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 2 of 6
Prawf RCD (math cas wedi'i fowldio)
RCD type:
AC ( ), A/F ( ), B/B+( ) General (G), Selective (S) and Delayed ( )
Rated tripping currents (IN)::
6mA, 10mA, 30mA, 100mA, 300mA, 500mA, 650mA, 1000mA
Llinell-PE, Llinell-N cyf.tage:
100V 265V RCD type AC and A/F, 190V 265V RCD type B/B+
Amlder:
50/60Hz 5%
RCD tripping current (Molded case type RCD General)
Math RCD
IN
Range IN [mA] Resolution [mA]
AC, A/F, B/B+
6mA, 10mA
AC, A/F, B/B+ 30mA IN 300mA (0.2 1.1) IN
0.1 YN
AC, A/F 500mA IN 650mA
Accuracy IN – 0%, +10%IN
– 0%, +5%IN
RCD Molded type tripping time range [ms] (TT/TN system)
x 1 / 2
x 1
x 2
x 5
AWTO
GS
GS
GS
GS
GS
6mA 10mA 30mA
m
AC 999 999 999 999 999 999 160 210 A/F 999 999 999 999 999 999 160 210 B/B+ 999 999 999 999 999 999 AC 999 999 999 999 999 999 160 210 A/F 999 999 999 999 999 999 160 210 B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 160 210 A/F 999 999 999 999 999 999 160 210
50 150 50 150
50 150 50 150
50 150 50 150
B/B+ 999 999 999 999 999 999 AC 999 999 999 999 999 999 160 210 100mA A/F 999 999 999 999 999 999 160 210
50 150 50 150
B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 160 210 300mA A/F 999 999 999 999 999 999 160 210
B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 160 210
500mA 650mA
A/F
999 999 999 999 999 999 160 210
B/B+
50 150 50 150
50 150
AC 999 999 999 999 999 999 160 210 1000mA A/F 999 999 999 999 999 999
B/B+
Resolution: 1ms, Accuracy: (2.0rdg + 2dgt)
RCD Molded type tripping time range [ms] (IT system) (*)
GS
310 310 310 310 310 310
310 310 310 310 310 310 310 310 310 310 310
AUTO+ G S
x 1 / 2
x 1
x 2
x 5
AWTO
GS
GS
GS
GS
GS
6mA AC 999 999 999 999 999 999 160 210
10mA A/F 999 999 999 999 999 999 160 210
30mA B/B+ 999 999
999 999
100mA 300mA
AC A/F B/B+
999 999 999
999 999 999
999 999
999 999 999
999 999 999
999 999
160 160
210 210
500mA 650mA
AC A/F B/B+
999 999
999 999
999 999
999 999
999 999
999 999
160 160
210 210
50 150 50 150
50 150 50 150
50 150
AC 999 999 1000mA A/F 999 999
B/B+
999 999 999 999
160 210
Resolution: 1ms, Accuracy: (2.0rdg + 2dgt) (*) Selection RCD type A/F and type B/B+ available only for Norway country
GS
310 310 310 310 310
AUTO+
GS
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
LLE YDYM NI
MACROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 3 of 6
Prawf ar brofir oedi gollyngiadau daear RCDs (gyda affeithiwr dewisol RCDX10)
RCD type: Rated tripping currents (IN):: Line-PE, Line-N voltage: Amlder:
AC ( ), A/F ( ), B/B+( ) General (G), Selective (S) and Delayed ( ) 0.3A 10A (type AC, A/F) ; 0.3A 3.0A (type B/B+) 100V 265V RCD type AC and A/F, 190V 265V RCD type B/B+ 50/60Hz 5%
Cerrynt baglu profwr oedi gollyngiadau daear RCDs (RCD Cyffredinol)
Math RCD
IN
Range IN [mA] Resolution [mA]
Accuracy IN
AC, A/F, B/B+ AC, A/F
300mA IN 1A 1.1A IN 10A
(0.3 1.1) IN
0.1IN
– 0%, +5%IN
Amrediad amser tripio profwr gollyngiadau daear RCDs [ms] (system TT/TN)
x 1 / 2
x 1
x 2
x 5
AWTO
0.3A
1.0A
1.1A
3.0A
3.1A
6.5A
6.6A
10.0A
GS
GS
GS
AC 999 999 999 999 999 999 200 250
A/F 999 999 999 999 999 999 200 250
B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 200 250 A/F 999 999 999 999 999 999 200 250 B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 200 250 A/F 999 999 999 999 999 999 200 250 B/B+
AC 999 999 999 999 999 999 200 250 A/F 999 999 999 999 999 999 B/B+
G S 50 150 50 150
50 150 50 150
50 150 50 150
GS
G S 310 310 310 310 310
310 310
Resolution: 1ms, Accuracy: (2.0rdg + 2dgt)
Earth leakage delay tester RCDs trip out time range [ms] (IT system) (*)
x 1 / 2
x 1
x 2
x 5
GS
GS
GS
GS
0.3A
3.0A
AC A/F B/B+
999 999 999 999 999 999 200 250 999 999 999 999 999 999 200 250
50 150 50 150
3.1A
6.5A
AC A/F B/B+
999 999 999 999 999 999 200 250 999 999 999 999 999 999 200 250
50 150 50 150
6.6A
10.0A
AC A/F B/B+
999 999 999 999 999 999 200 250 999 999 999 999 999 999 200 250
Resolution: 1ms, Accuracy: (2.0rdg + 2dgt) (*) Selection RCD type A/F and type B/B+ available only for Norway country
AUTO G S
G S 310
310
NoTripTest Non-trip earth loop impedance
Prawf cyftage:
100265V (Line-PE), 50/60Hz 5%
NoTripTest Systems with Neutral wire
Ystod []
Penderfyniad []
Cywirdeb (*)
0.01 9.99
0.01
(5 reading + N/10)
10.0 199.9
0.1
(5 reading + N)
200 1999
1
(5 reading + 3N)
(*) If IN <30mA, test current = IN/2 and N[]=30/IN; if IN 30mA, test current <15mA and N=1
NoTripTest Systems without Neutral wire
Ystod []
Penderfyniad []
Cywirdeb (*)
1 1999
1
-0%, +(5.0 lettura +N)
(*) if IN <30mA, test current = IN/2 and N[]=(10×30)/IN ; If IN 30mA, test current IN/2 and N[]=(3×30)/IN
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
LLE YDYM NI
MACROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 4 of 6
Cyswllt cyftage (RCD a Phrawf DimTrip)
Ystod [V]
Penderfyniad [V]
0 Utlim
0.1
Cyswllt cyftage (EARTH test TT system)
Ystod [V]
Penderfyniad [V]
0 99.9
0.1
Cyswllt cyftage (EARTH test TN system)
Ystod [V]
Penderfyniad [V]
0 99.9
0.1
100 999
1
Gwrthiant daear gyda dull 3 gwifren
Ystod []
Penderfyniad []
0.01 9.99
0.01
10.0 99.9
0.1
100 999
1
1.00k 49.99k
0.01k
Prawf cyfredol:
<10mA 77.5Hz, Open-circuit voltage: < 20Vrms
(*) Ychwanegwch 5% at y cywirdeb os yw gwrthiannau'r chwiliedydd (Rs neu Rh) > 100 x Rmes
Accuracy -0%, +(5.0 rdg + 3V)
Accuracy -0%, +(5.0 rdg + 3V)
Accuracy -0%, +(5.0 rdg + 3V)
Cywirdeb (*)
(5.0 rdg + 3dgt)
Gwrthiant pridd gyda dull Wenner 4-gwifren
Range [m]
Resolution [m]
0.06 9.99
0.01
10.0 99.9
0.1
100 999
1
1.00k 9.99k
0.01k
10.0k 99.9k
0.1k
100k 999k
1k
1.00M 3.14M
0.01M
(*) with distance d=10m, Distance “d” range:
1 10m
Prawf cyfredol:
<10mA 77.5Hz, Open-circuit voltage: < 20Vrms
Accuracy (*) (5.0 rdg + 3dgt)
Cylchdroi dilyniant cyfnod gyda dull 1-wifren
Cyftagystod e PN, P-PE[V]
Amrediad amlder
100 265
50Hz/60Hz 5%
Dim ond trwy gyswllt uniongyrchol â rhannau byw metel y cynhelir mesuriad (nid ar y wain inswleiddio)
Cyftage drop on main power lines (V%)
Ystod (%)
Datrysiad (%)
0 100
0.1
Accuracy (10.0 rdg + 4dgt)
Cerrynt gollyngiad (gan HT96U dewisol clamp trawsddygiadur)
Ystod [mA]
Datrysiad [mA]
0.5 999.9
0.1
Accuracy (5.0 rdg + 2dgt)
Paramedrau amgylcheddol (swyddogaeth AUX)
Paramedr
Amrediad
Tymheredd [°C]
-20 ° C 80 ° C.
Tymheredd [°F]
-4°F 176°F
Lleithder cymharol [%HR]
0 100%HR
Allbwn DC cyftage
0.1mV 1.0V
0.001Lux 20.00 Lux (*)
Goleuedd [Lux]
0.1 Lux 2000 Lux (*)
1 Lux 20 kLux (*)
(*) Mae cywirdeb y chwiliedydd lux HT53 yn unol â Dosbarth AA
Resolution 0.1 °C 0.1 °F
0.1% UR 0.1mV
0.001 0.02 Lux 0.1 2 Lux 1 20 Lux
Accuracy (2.0rdg+2dgt)
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
LLE YDYM NI
MACROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 5 of 6
Mesur prif baramedrau a harmonigau (PQA)
AC TRMS Cyftage
Range [V] 15.0 459.9
Allowed crest factor
Resolution [V] 0.1V
1,5 ; Frequency: 42.5 69.0 Hz
Accuracy (1.0rdg + 1dgt)
Amlder
Ystod [Hz]
Datrysiad [Hz]
42.5 69.0
0.01
Caniateir cyftage: 15.0 459.9V ; Allowed current: 5%FS clamp FS clamp
Accuracy (2.0rdg + 2dgt)
AC TRMS Cyfredol
FS clamp
Ystod [A]
10A
5% FS 9.99
10A FS 200
5% FS 199.9
200A FS 3000
5% FS 2999
Range: 5 999.9 mV; Values under 5mV are zeroed
Allowed crest factor
3; Frequency: 42.5 69.0 Hz
Penderfyniad [A] 0.01 0.1 1
Cywirdeb
1Ph: (1.0rdg + 3 dgt) 3Ph: (2.0rdg + 5 dgt)
Active power (@ 230V in 1Ph systems, 400V in 3Ph systems, cos=1, f=50.0Hz)
FS clamp
Ystod [kW]
Datrysiad [kW]
Cywirdeb
10A
0.000 9.999
0.001
10A FS 200
0.00 999.99
0.01
1Ph: (2.0rdg + 5 dgt)
200A FS 1000
0.0 999.9
0.1
3Ph: (2.5rdg + 8 dgt)
1000A FS 3000
0 9999
1
Reactive power (@ 230V in 1Ph systems, 400V in 3Ph systems, cos=0, f=50.0Hz)
FS clamp
Ystod [kVAr]
Datrysiad [kVAr]
Cywirdeb
10A
0.000 9.999
0.001
10A FS 200
0.00 999.99
0.01
1Ph: (2.0rdg + 7 dgt)
200A FS 1000
0.0 999.9
0.1
3Ph: (3.0rdg + 8 dgt)
1000A FS 3000
0 9999
1
Ffactor pŵer (@ 230V mewn systemau 1Ph, 400V mewn systemau 3Ph, f=50.0Hz)
Amrediad
Datrysiad
Cywirdeb
0.70c 1.00 0.70i
0.01
(4.0rdg + 10dgt) if I 10%FS (2.0rdg + 3dgt) if I > 10%FS
cos (@ 230V in 1Ph systems, 400V in 3Ph systems, f=50.0Hz)
Amrediad
Datrysiad
Cywirdeb
0.70c 1.00 0.70i
0.01
(4.0rdg + 10dgt) if I 10%FS (1.0rdg + 7dgt) if I > 10%FS
Cyftagharmonigau e (@ 230V mewn systemau 1Ph, 400V mewn systemau 3Ph, f=50.0Hz)
Amrediad [%]
Datrysiad [%]
Gorchymyn
Cywirdeb
0.1 100.0
0.1
01 25
(5.0rdg + 5dgt)
Frequency of fundamental: 42.5 69.0 Hz, DC accuracy not declared
Harmonigau cyfredol (f=50Hz)
Amrediad [%]
Datrysiad [%]
0.1 100.0
0.1
Gorchymyn 01 9 10 17 18 25
Accuracy (5.0rdg + 5dgt) (10.0rdg + 5dgt) (15.0rdg + 10dgt)
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
LLE YDYM NI
MACROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 6 of 6
2. MANYLION CYFFREDINOL
DISPLAY AND MEMORY: Features: Memory: Communication:
Touch screen, color graphic LCD, 320x240mm 999 locations, 3 marker levels Optical-USB and built-in WiFi
POWER SUPPLY: Batteries: Battery life: Auto Power OFF:
6 x 1.2V(rechargeable) type AA or 6 x 1.5V type AA > 500 test for each function after 5 min of idleness (disabled)
MECHANICAL FEATURES: Dimensions (L x W x H): Weight (included batteries):
WORKING ENVIRONMENTAL CONDITIONS: Reference temperature: Working temperature: Allowed relative humidity: Storage temperature: Storage humidity:
TEST VERIFIES REFERENCE STANDARDS: Continuity test with 200mA: Insulation resistance: Earth resistance: Fault loop impedance: RCD test: Multifunction: Prospective short circuit current: Earth resistance on TN systems:
225 x 165 x 75mm 1.2kg
23°C 5°C 0°C 40°C <80%RH -10°C 60°C <80%RH
IEC/EN61557-4 IEC/EN61557-2 IEC/EN61557-5 IEC/EN61557-3 IEC/EN61557-6 IEC/EN61557-10 EN60909-0 EN61936-1 + EN50522
GENERAL REFERENCE STANDARDS: Safety of measuring instruments: Product type standard: Technical documentation : Insulation: Pollution degree: Encapsulation :
Overvoltage category: Max height of use:
IEC/EN61010-1, IEC/EN61010-031, IEC/EN61010-2-032 IEC/EN61557-1 IEC/EN61187 double insulation 2 IP40
CAT IV 300V (to ground), max 415V between inputs 2000m
Mae'r offeryn hwn yn bodloni gofynion Isel Voltage Directive 2014/35/EU (LVD), EMC Directive 2014/35/EU and Directive RED 2014/53/EU
Mae'r offeryn hwn yn bodloni gofynion Cyfarwyddeb Ewropeaidd 2011/65/EU (RoHS) a 2012/19/EU (WEEE)
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
LLE YDYM NI
Gwasanaethau MYNEGAI EURO
Mae EURO-INDEX yn fabrikant, yn mewnforio ac yn dosbarthu amrywiaeth o A-merken op het gebied van test- en meetinstrumenten. Daarnaast leveren wij een groot aantal diensten om het gebruik van deze instrumenten in uw bedrijfsvoering te optimaliseren. Dit omvat uiteraard onderhoud, reparatie en kalibratie van de instrumenten, maar ook kennisdeling via de EURO-MYNEGAI Academi en verhuur van instrumenten.
Geautoriseerd Service Centrum EURO-MYNEGAI bv is van alle vertegenwoordigde merken een Geautoriseerd Service Centrum. Dit betekent dat uw instrumenten worden behandeld drws technici die zijn opgeleid drws de fabrikant en beschikken dros de juiste gereedschappen en meddalwedd. Er worden uitsluitend originele onderdelen toegepast en de garantie van uw instrument, evenals de certificering (ATEX, EN50379, etc.) blijven intact.
Labordy Calibradu
Ons moderne service- en kalibratielaboratorium beschikt over een
Achrediad RvA ar NEN-EN-ISO/IEC 17025. Deze accreditatie
geldt voor grootheden, zoals gespecificeerd in de scope bij accreditatienummer K105.
Mwy o wybodaeth
Os ydych chi'n gwybod mwy am yr ewro op-index.nl/diensten
Gwasanaeth Symudol
Naast de vaste kalibratielaboratoria in Capelle aan den IJssel
jw.org cy Zaventem beschikken wij ook over laboratoria op wielen met
de naam “Gwasanaeth Symudol”. Dit biedt vertrouwde
gwasanaeth en kwaliteit, bij u voor de deur!
Mwy o wybodaeth
KWS®
Mae KWS® yn system uniek service system ar gyfer uw meetinginstrumenten
cyfarfod cyfnodolyn onderhoud en kalibratie tegen vaste, lage am ddim.
Uw kalibratiecertificaten zijn digital beschikbaar trwy Mijn KWS (am ddim webporth ac ap).
Mwy o wybodaeth
Crynhoi offerynnau cyfarfod
Amrywiaeth eang
Nauwkeurigheid aantoonbaar drws actueel kalibratiecertificaat
Deskundig advies Complete levering inclusief accessoires
Mwy o wybodaeth
EURO-INDEX Academy Trainingen (individueel en klassikaal) Cursussen en workshops Demonstratie- en instructievideo’s Whitepapers
Mwy o wybodaeth
Gwasanaethbali
Onderhoud, reparatie a kalibratie
Cyrsiau a gweithdai
Gwasanaeth Symudol
Wijzigingen voorbehouden EURO-INDEX® NL 24005
Dogfennau / Adnoddau
 |
HT INSTRUMENTS MACROTESTG3 Multifunction Multi Tester [pdfCyfarwyddiadau MACROTESTG3 Multifunction Multi Tester, MACROTESTG3, Multifunction Multi Tester, Multi Tester |