HT INSTRUMENTS MACROTESTG3 Multifunction Multi Tester
Specifikationer
- Åbent kredsløb voltage: 4V til 12V
- Isolationsmodstand (DC vol.)tage):
- Test voltage [v]
- Område [M]
- Opløsning [M]
- Nøjagtighed
- Maksimal teststrøm: 5.81A (at 265V); 10.10A (at 457V)
- Test voltage intervaller: 100-265V (Line-Neutral) / 100-460V (Line-Line); 50/60Hz ±5%
- Sikkerhedsbeskyttelse: Z-linje (linje-linje, linje-nul, linje-PE)
- Isoleringsmaterialer: PVC, Rubber butyl, EPR, XLPE
- First fault current (IT systems):
- Område (mA)
- Opløsning (mA)
- Begræns kontakt voltage (ULIM): 25V, 50V
Electrical Safety Testing
- Connect the safety tester according to the specified voltage rækkevidde.
- Select the appropriate insulation resistance test voltage.
- Measure the insulation resistance and ensure it falls within the specified accuracy range.
- Check the maximum test current and ensure it is within the safe limits for testing.
- Perform first fault current tests as required.
RCD test
- Select the RCD type and rated tripping currents for testing.
- Set the Line-PE and Line-N voltage i henhold til specifikationerne.
- Perform RCD Molded type tripping time range tests based on the specific RCD type and current settings.
"`
Åbent kredsløb voltage: Short circuit current: Nominal test current: Safety protection:
nominal test voltage 0% +10% <6.0mA at 500V test voltage
>1mA if load= 1k*Vnom (Vnom=50V, 100V, 250V, 500V, 1000V) the display shows an error message for input voltage> 10V
Z-linje (linje-linje, linje-nul, linje-PE)
Rækkevidde []
Opløsning []
Nøjagtighed
0.00 199.9 m (*) 200 1999 m (*)
0.1 m (*) 1 m (*)
(5.0 rdg + 1m) (*)
0.01 9.99 10.0 199.9
0.01 0.1
(5.0 rdg + 3dgt)
(*) By means of IMP57 optional accessory
Maksimal teststrøm
5.81A (at 265V); 10.10A (at 457V)
Test voltage ranges: Protection type: Insulation materials:
100265V (Line-Neutral) / 100460V (Line-Line); 50/60Hz 5% MCB (B, C, D, K), Fuse (gG, aM) PVC, Rubber butyl, EPR, XLPE
Første fejlstrøm (IT-systemer)
Område (mA)
Opløsning (mA)
0.1 0.9
0.1
1 999
1
Begræns kontakt voltage (ULIM)
25V, 50V
Accuracy (5.0 rdg + 1dgt) (5.0 rdg + 3dgt)
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
HVOR ER VI
MACROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 2 of 6
RCD-test (støbt hustype)
RCD type:
AC ( ), A/F ( ), B/B+( ) General (G), Selective (S) and Delayed ( )
Rated tripping currents (IN)::
6mA, 10mA, 30mA, 100mA, 300mA, 500mA, 650mA, 1000mA
Linje-PE, Linje-N vol.tage:
100V 265V RCD type AC and A/F, 190V 265V RCD type B/B+
Frekvens:
50/60 Hz 5 %
RCD tripping current (Molded case type RCD General)
RCD type
IN
Range IN [mA] Resolution [mA]
AC, A/F, B/B+
6mA,10mA
AC, A/F, B/B+ 30mA IN 300mA (0.2 1.1) IN
0.1 IN
AC, A/F 500mA IN 650mA
Accuracy IN – 0%, +10%IN
– 0%, +5%IN
RCD Molded type tripping time range [ms] (TT/TN system)
x 1 / 2
x 1
x 2
x 5
AUTO
GS
GS
GS
GS
GS
6mA 10mA 30mA
m
AC 999 999 999 999 999 999 160 210 A/F 999 999 999 999 999 999 160 210 B/B+ 999 999 999 999 999 999 AC 999 999 999 999 999 999 160 210 A/F 999 999 999 999 999 999 160 210 B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 160 210 A/F 999 999 999 999 999 999 160 210
50 150 50 150
50 150 50 150
50 150 50 150
B/B+ 999 999 999 999 999 999 AC 999 999 999 999 999 999 160 210 100mA A/F 999 999 999 999 999 999 160 210
50 150 50 150
B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 160 210 300mA A/F 999 999 999 999 999 999 160 210
B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 160 210
500mA 650mA
A / F
999 999 999 999 999 999 160 210
B/B+
50 150 50 150
50 150
AC 999 999 999 999 999 999 160 210 1000mA A/F 999 999 999 999 999 999
B/B+
Resolution: 1ms, Accuracy: (2.0rdg + 2dgt)
RCD Molded type tripping time range [ms] (IT system) (*)
GS
310 310 310 310 310 310
310 310 310 310 310 310 310 310 310 310 310
AUTO+ G S
x 1 / 2
x 1
x 2
x 5
AUTO
GS
GS
GS
GS
GS
6mA AC 999 999 999 999 999 999 160 210
10mA A/F 999 999 999 999 999 999 160 210
30mA B/B+ 999 999
999 999
100mA 300mA
AC A/F B/B+
999 999 999
999 999 999
999 999
999 999 999
999 999 999
999 999
160 160
210 210
500mA 650mA
AC A/F B/B+
999 999
999 999
999 999
999 999
999 999
999 999
160 160
210 210
50 150 50 150
50 150 50 150
50 150
AC 999 999 1000mA A/F 999 999
B/B+
999 999 999 999
160 210
Resolution: 1ms, Accuracy: (2.0rdg + 2dgt) (*) Selection RCD type A/F and type B/B+ available only for Norway country
GS
310 310 310 310 310
AUTO+
GS
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
HVOR ER VI
MACROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 3 of 6
Test på jordlækageforsinkelsestester RCD'er (med RCDX10 valgfrit tilbehør)
RCD type: Rated tripping currents (IN):: Line-PE, Line-N voltage: Frekvens:
AC ( ), A/F ( ), B/B+( ) General (G), Selective (S) and Delayed ( ) 0.3A 10A (type AC, A/F) ; 0.3A 3.0A (type B/B+) 100V 265V RCD type AC and A/F, 190V 265V RCD type B/B+ 50/60Hz 5%
Jordlækageforsinkelsestester RCD'er udløsningsstrøm (RCD Generel)
RCD type
IN
Range IN [mA] Resolution [mA]
Accuracy IN
AC, A/F, B/B+ AC, A/F
300mA IN 1A 1.1A IN 10A
(0.3 1.1) IN
0.1IN
– 0%, +5%IN
Jordlækageforsinkelsestester RCD'er udløsningstidsområde [ms] (TT/TN-system)
x 1 / 2
x 1
x 2
x 5
AUTO
0.3A
1.0A
1.1A
3.0A
3.1A
6.5A
6.6A
10.0A
GS
GS
GS
AC 999 999 999 999 999 999 200 250
A/F 999 999 999 999 999 999 200 250
B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 200 250 A/F 999 999 999 999 999 999 200 250 B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 200 250 A/F 999 999 999 999 999 999 200 250 B/B+
AC 999 999 999 999 999 999 200 250 A/F 999 999 999 999 999 999 B/B+
G S 50 150 50 150
50 150 50 150
50 150 50 150
GS
G S 310 310 310 310 310
310 310
Resolution: 1ms, Accuracy: (2.0rdg + 2dgt)
Earth leakage delay tester RCDs trip out time range [ms] (IT system) (*)
x 1 / 2
x 1
x 2
x 5
GS
GS
GS
GS
0.3A
3.0A
AC A/F B/B+
999 999 999 999 999 999 200 250 999 999 999 999 999 999 200 250
50 150 50 150
3.1A
6.5A
AC A/F B/B+
999 999 999 999 999 999 200 250 999 999 999 999 999 999 200 250
50 150 50 150
6.6A
10.0A
AC A/F B/B+
999 999 999 999 999 999 200 250 999 999 999 999 999 999 200 250
Resolution: 1ms, Accuracy: (2.0rdg + 2dgt) (*) Selection RCD type A/F and type B/B+ available only for Norway country
AUTO G S
G S 310
310
NoTripTest Non-trip earth loop impedance
Test voltage:
100265V (Line-PE), 50/60Hz 5%
NoTripTest Systems with Neutral wire
Rækkevidde []
Opløsning []
Nøjagtighed (*)
0.01 9.99
0.01
(5 reading + N/10)
10.0 199.9
0.1
(5 reading + N)
200 1999
1
(5 reading + 3N)
(*) If IN <30mA, test current = IN/2 and N[]=30/IN; if IN 30mA, test current <15mA and N=1
NoTripTest Systems without Neutral wire
Rækkevidde []
Opløsning []
Nøjagtighed (*)
1 1999
1
-0%, +(5.0 lettura +N)
(*) if IN <30mA, test current = IN/2 and N[]=(10×30)/IN ; If IN 30mA, test current IN/2 and N[]=(3×30)/IN
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
HVOR ER VI
MACROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 4 of 6
Kontakt voltage (RCD og NoTripTest)
Område [V]
Opløsning [V]
0 Utlim
0.1
Kontakt voltage (EARTH test TT system)
Område [V]
Opløsning [V]
0 99.9
0.1
Kontakt voltage (EARTH test TN system)
Område [V]
Opløsning [V]
0 99.9
0.1
100 999
1
Jordmodstand med 3-tråds metode
Rækkevidde []
Opløsning []
0.01 9.99
0.01
10.0 99.9
0.1
100 999
1
1.00k 49.99k
0.01k
Teststrøm:
<10mA 77.5Hz, Open-circuit voltage: < 20 Vrms
(*) Tilføj 5% til nøjagtigheden, hvis probemodstanden (Rs eller Rh) er > 100 x Rmeas
Accuracy -0%, +(5.0 rdg + 3V)
Accuracy -0%, +(5.0 rdg + 3V)
Accuracy -0%, +(5.0 rdg + 3V)
Nøjagtighed (*)
(5.0 rdg + 3dgt)
Jordmodstand med 4-tråds Wenner-metode
Range [m]
Resolution [m]
0.06 9.99
0.01
10.0 99.9
0.1
100 999
1
1.00k 9.99k
0.01k
10.0k 99.9k
0.1k
100k 999k
1k
1.00M 3.14M
0.01M
(*) with distance d=10m, Distance “d” range:
1 10 m
Teststrøm:
<10mA 77.5Hz, Open-circuit voltage: < 20 Vrms
Accuracy (*) (5.0 rdg + 3dgt)
Fasesekvensrotation med 1-trådsmetode
Voltage-område PN, P-PE[V]
Frekvensområde
100 265
50Hz/60Hz 5%
Måling udføres kun ved direkte kontakt med metaldele af spænding (ikke på isoleringskappen)
Voltage drop on main power lines (V%)
Rækkevidde (%)
Opløsning (%)
0 100
0.1
Accuracy (10.0 rdg + 4dgt)
Lækstrøm (ved HT96U valgfri clamp transducer)
Område [mA]
Opløsning [mA]
0.5 999.9
0.1
Accuracy (5.0 rdg + 2dgt)
Miljøparametre (AUX-funktion)
Parameter
Rækkevidde
Temperatur [°C]
-20 ° C 80 ° C
Temperatur [°F]
-4°F 176°F
Relativ luftfugtighed [%HR]
0 100%HR
DC -udgang voltage
0.1mV 1.0V
0.001Lux 20.00 Lux (*)
Belysningsstyrke [Lux]
0.1 Lux 2000 Lux (*)
1 Lux 20 kLux (*)
(*) Nøjagtigheden af HT53 lux-sonden er i henhold til klasse AA
Opløsning 0.1 °C 0.1 °F
0.1% UR 0.1mV
0.001 0.02 Lux 0.1 2 Lux 1 20 Lux
Accuracy (2.0rdg+2dgt)
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
HVOR ER VI
MACROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 5 of 6
Måling af hovedparametre og harmoniske (PQA)
AC TRMS Voltage
Range [V] 15.0 459.9
Allowed crest factor
Resolution [V] 0.1V
1,5 ; Frequency: 42.5 69.0 Hz
Nøjagtighed (1.0 aflæsning + 1 cifre)
Frekvens
Område [Hz]
Opløsning [Hz]
42.5 69.0
0.01
Tilladt voltage: 15.0 459.9V ; Allowed current: 5%FS clamp FS clamp
Nøjagtighed (2.0 aflæsning + 2 cifre)
AC TRMS strøm
FS clamp
Område [A]
10A
5% FS 9.99
10A FS 200
5% FS 199.9
200A FS 3000
5% FS 2999
Range: 5 999.9 mV; Values under 5mV are zeroed
Allowed crest factor
3; Frequency: 42.5 69.0 Hz
Opløsning [A] 0.01 0.1 1
Nøjagtighed
1Ph: (1.0rdg + 3 dgt) 3Ph: (2.0rdg + 5 dgt)
Active power (@ 230V in 1Ph systems, 400V in 3Ph systems, cos=1, f=50.0Hz)
FS clamp
Rækkevidde [kW]
Opløsning [kW]
Nøjagtighed
10A
0.000 9.999
0.001
10A FS 200
0.00 999.99
0.01
1Ph: (2.0rdg + 5 dgt)
200A FS 1000
0.0 999.9
0.1
3Ph: (2.5rdg + 8 dgt)
1000A FS 3000
0 9999
1
Reactive power (@ 230V in 1Ph systems, 400V in 3Ph systems, cos=0, f=50.0Hz)
FS clamp
Område [kVAr]
Opløsning [kVAr]
Nøjagtighed
10A
0.000 9.999
0.001
10A FS 200
0.00 999.99
0.01
1Ph: (2.0rdg + 7 dgt)
200A FS 1000
0.0 999.9
0.1
3Ph: (3.0rdg + 8 dgt)
1000A FS 3000
0 9999
1
Effektfaktor (@ 230V i 1Ph-systemer, 400V i 3Ph-systemer, f=50.0Hz)
Rækkevidde
Opløsning
Nøjagtighed
0.70c 1.00 0.70i
0.01
(4.0rdg + 10dgt) if I 10%FS (2.0rdg + 3dgt) if I > 10%FS
cos (@ 230V in 1Ph systems, 400V in 3Ph systems, f=50.0Hz)
Rækkevidde
Opløsning
Nøjagtighed
0.70c 1.00 0.70i
0.01
(4.0rdg + 10dgt) if I 10%FS (1.0rdg + 7dgt) if I > 10%FS
Voltage-harmoniske (@ 230V i 1-fasede systemer, 400V i 3-fasede systemer, f=50.0Hz)
Rækkevidde [%]
Opløsning [%]
Bestille
Nøjagtighed
0.1 100.0
0.1
01 25
(5.0rdg + 5dgt)
Frequency of fundamental: 42.5 69.0 Hz, DC accuracy not declared
Strømoversvingninger (f=50Hz)
Rækkevidde [%]
Opløsning [%]
0.1 100.0
0.1
Bestil 01 9 10 17 18 25
Accuracy (5.0rdg + 5dgt) (10.0rdg + 5dgt) (15.0rdg + 10dgt)
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
HVOR ER VI
MACROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 6 of 6
2. GENERELLE SPECIFIKATIONER
DISPLAY AND MEMORY: Features: Memory: Communication:
Touch screen, color graphic LCD, 320x240mm 999 locations, 3 marker levels Optical-USB and built-in WiFi
POWER SUPPLY: Batteries: Battery life: Auto Power OFF:
6 x 1.2V(rechargeable) type AA or 6 x 1.5V type AA > 500 test for each function after 5 min of idleness (disabled)
MECHANICAL FEATURES: Dimensions (L x W x H): Weight (included batteries):
WORKING ENVIRONMENTAL CONDITIONS: Reference temperature: Working temperature: Allowed relative humidity: Storage temperature: Storage humidity:
TEST VERIFIES REFERENCE STANDARDS: Continuity test with 200mA: Insulation resistance: Earth resistance: Fault loop impedance: RCD test: Multifunction: Prospective short circuit current: Earth resistance on TN systems:
225 x 165 x 75 mm 1.2 kg
23°C 5°C 0°C 40°C <80%RH -10°C 60°C <80%RH
IEC/EN61557-4 IEC/EN61557-2 IEC/EN61557-5 IEC/EN61557-3 IEC/EN61557-6 IEC/EN61557-10 EN60909-0 EN61936-1 + EN50522
GENERAL REFERENCE STANDARDS: Safety of measuring instruments: Product type standard: Technical documentation : Insulation: Pollution degree: Encapsulation :
Overvoltage category: Max height of use:
IEC/EN61010-1, IEC/EN61010-031, IEC/EN61010-2-032 IEC/EN61557-1 IEC/EN61187 double insulation 2 IP40
CAT IV 300V (to ground), max 415V between inputs 2000m
Dette instrument opfylder kravene i Low Voltage Directive 2014/35/EU (LVD), EMC Directive 2014/35/EU and Directive RED 2014/53/EU
Dette instrument opfylder kravene i det europæiske direktiv 2011/65/EU (RoHS) og 2012/19/EU (WEEE)
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
HVOR ER VI
Tjenester fra EURO-INDEX
EURO-INDEX er fabrikant, importør og distributør af diverse A-mærker på området for test- og meetinstrumenter. Derudover leverer vi et stort antal ydelser til at bruge disse instrumenter til at optimere din virksomhed. Dette omfatter naturligvis vedligeholdelse, reparation og kalibrering af instrumenter, men også viden via EURO-INDEX Academy og udlejning af instrumenter.
Geautoriseret Service Centrum EURO-INDEX bv er af alle repræsenterede mærker et Geautoriseret Service Centrum. Dette betyder, at dine instrumenter bliver behandlet af teknikere, som er blevet optaget af fabrikanten og har adgang til de rigtige værktøjer og software. Er ene originale komponenter anvendt og garantien for dit instrument, samt certificeringen (ATEX, EN50379 osv.) forbliver intakt.
Kalibreringslaboratorium
Ons moderne service- og kalibratielaboratorium har over en
RvA akkreditering til NEN-EN-ISO/IEC 17025. Denne akkreditering
geldt voor grootheden, som f.eks. gespecificeret i omfanget af akkrediteringsnummer K105.
Mere information
Se et overblik over alle vores tjenester på euro-index.nl/diensten
Mobiltjeneste
Ud over de vaste kalibratielaboratoria i Capelle aan den IJssel
en Zaventem have wij ook over laboratoria op wielen met
navnet "Mobile Service". Dette tilbyder vertrouwde
service og kvalitet, ved dig for de deur!
Mere information
KWS®
KWS® er et unikt servicesystem til dine mødeinstrumenter
med periodisk vedligeholdelse og kalibrering mod faste, lave omkostninger.
Dit kalibratiecertifikat er digitalt tilgængeligt via Min KWS (gratis webportal og app).
Mere information
Overholdelse af mødeinstrumenter
Udbredt sortiment
Nauwkeurighed aantoonbaar af aktuel kalibratiecertificaat
Deskundig advies Complete levering inclusief accessoires
Mere information
EURO-INDEX Academy Trainingen (individueel en klassikaal) Cursussen en workshops Demonstratie- en instructievideo’s Whitepapers
Mere information
Servicebalie
Onderhoud, reparatie og kalibrering
Kurser og workshops
Mobiltjeneste
Vi har forbeholdt EURO-INDEX® NL 24005
Dokumenter/ressourcer
 |
HT INSTRUMENTS MACROTESTG3 Multifunction Multi Tester [pdf] Instruktioner MACROTESTG3 Multifunction Multi Tester, MACROTESTG3, Multifunction Multi Tester, Multi Tester |