HT INSTRUMENTS MACROTESTG3 Multifunction Multi Tester
Spesifikasi
- Litar terbuka voltage: 4V hingga 12V
- Rintangan penebat (DC voltage):
- Ujian voltage [V]
- Julat [M]
- Resolusi [M]
- Ketepatan
- Arus ujian maksimum: 5.81A (at 265V); 10.10A (at 457V)
- Ujian voltagjulat e: 100-265V (Line-Neutral) / 100-460V (Line-Line); 50/60Hz ±5%
- Perlindungan keselamatan: Garisan Z (Garis-Garis, Garis-Neutral, Garis-PE)
- Bahan penebat: PVC, Rubber butyl, EPR, XLPE
- First fault current (IT systems):
- Julat (mA)
- Resolusi (mA)
- Hadkan kenalan voltage (ULIM): 25V, 50V
Electrical Safety Testing
- Connect the safety tester according to the specified voltagjulat e.
- Select the appropriate insulation resistance test voltage.
- Measure the insulation resistance and ensure it falls within the specified accuracy range.
- Check the maximum test current and ensure it is within the safe limits for testing.
- Perform first fault current tests as required.
Ujian RCD
- Select the RCD type and rated tripping currents for testing.
- Set the Line-PE and Line-N voltage mengikut spesifikasi.
- Perform RCD Molded type tripping time range tests based on the specific RCD type and current settings.
“`
Litar terbuka voltage: Short circuit current: Nominal test current: Safety protection:
nominal test voltage 0% +10% <6.0mA at 500V test voltage
>1mA if load= 1k*Vnom (Vnom=50V, 100V, 250V, 500V, 1000V) the display shows an error message for input voltage> 10V
Garisan Z (Garis-Garis, Garis-Neutral, Garis-PE)
Julat []
Resolusi []
Ketepatan
0.00 199.9 m (*) 200 1999 m (*)
0.1 m (*) 1 m (*)
(5.0 rdg + 1m) (*)
0.01 9.99 10.0 199.9
0.01 0.1
(5.0 rdg + 3dgt)
(*) By means of IMP57 optional accessory
Arus ujian maksimum
5.81A (at 265V); 10.10A (at 457V)
Ujian voltage ranges: Protection type: Insulation materials:
100265V (Line-Neutral) / 100460V (Line-Line); 50/60Hz 5% MCB (B, C, D, K), Fuse (gG, aM) PVC, Rubber butyl, EPR, XLPE
Arus kerosakan pertama (sistem IT)
Julat (mA)
Resolusi (mA)
0.1 0.9
0.1
1 999
1
Hadkan kenalan voltage (ULIM)
25V, 50V
Accuracy (5.0 rdg + 1dgt) (5.0 rdg + 3dgt)
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
DIMANA KITA BERADA
MACROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 2 of 6
Ujian RCD (Jenis kes acuan)
RCD type:
AC ( ), A/F ( ), B/B+( ) General (G), Selective (S) and Delayed ( )
Rated tripping currents (IN)::
6mA, 10mA, 30mA, 100mA, 300mA, 500mA, 650mA, 1000mA
Line-PE, Line-N voltage:
100V 265V RCD type AC and A/F, 190V 265V RCD type B/B+
Kekerapan:
50/60Hz 5%
RCD tripping current (Molded case type RCD General)
jenis RCD
IN
Range IN [mA] Resolution [mA]
AC, A/F, B/B+
6mA,10mA
AC, A/F, B/B+ 30mA IN 300mA (0.2 1.1) IN
0.1 DALAM
AC, A/F 500mA IN 650mA
Accuracy IN – 0%, +10%IN
– 0%, +5%IN
RCD Molded type tripping time range [ms] (TT/TN system)
x 1 / 2
x 1
x 2
x 5
AUTO
GS
GS
GS
GS
GS
6mA 10mA 30mA
m
AC 999 999 999 999 999 999 160 210 A/F 999 999 999 999 999 999 160 210 B/B+ 999 999 999 999 999 999 AC 999 999 999 999 999 999 160 210 A/F 999 999 999 999 999 999 160 210 B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 160 210 A/F 999 999 999 999 999 999 160 210
50 150 50 150
50 150 50 150
50 150 50 150
B/B+ 999 999 999 999 999 999 AC 999 999 999 999 999 999 160 210 100mA A/F 999 999 999 999 999 999 160 210
50 150 50 150
B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 160 210 300mA A/F 999 999 999 999 999 999 160 210
B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 160 210
500mA 650mA
A/F
999 999 999 999 999 999 160 210
B/B+
50 150 50 150
50 150
AC 999 999 999 999 999 999 160 210 1000mA A/F 999 999 999 999 999 999
B/B+
Resolution: 1ms, Accuracy: (2.0rdg + 2dgt)
RCD Molded type tripping time range [ms] (IT system) (*)
GS
310 310 310 310 310 310
310 310 310 310 310 310 310 310 310 310 310
AUTO+ G S
x 1 / 2
x 1
x 2
x 5
AUTO
GS
GS
GS
GS
GS
6mA AC 999 999 999 999 999 999 160 210
10mA A/F 999 999 999 999 999 999 160 210
30mA B/B+ 999 999
999 999
100mA 300mA
AC A/F B/B+
999 999 999
999 999 999
999 999
999 999 999
999 999 999
999 999
160 160
210 210
500mA 650mA
AC A/F B/B+
999 999
999 999
999 999
999 999
999 999
999 999
160 160
210 210
50 150 50 150
50 150 50 150
50 150
AC 999 999 1000mA A/F 999 999
B/B+
999 999 999 999
160 210
Resolution: 1ms, Accuracy: (2.0rdg + 2dgt) (*) Selection RCD type A/F and type B/B+ available only for Norway country
GS
310 310 310 310 310
AUTO+
GS
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
DIMANA KITA BERADA
MACROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 3 of 6
Uji pada RCD penguji kelewatan kebocoran bumi (dengan aksesori pilihan RCDX10)
RCD type: Rated tripping currents (IN):: Line-PE, Line-N voltage: Kekerapan:
AC ( ), A/F ( ), B/B+( ) General (G), Selective (S) and Delayed ( ) 0.3A 10A (type AC, A/F) ; 0.3A 3.0A (type B/B+) 100V 265V RCD type AC and A/F, 190V 265V RCD type B/B+ 50/60Hz 5%
Penguji kelewatan kebocoran bumi RCD arus tersandung (RCD Umum)
jenis RCD
IN
Range IN [mA] Resolution [mA]
Accuracy IN
AC, A/F, B/B+ AC, A/F
300mA IN 1A 1.1A IN 10A
(0.3 1.1) IN
0.1IN
– 0%, +5%IN
Penguji kelewatan kebocoran bumi RCD perjalanan keluar julat masa [ms] (sistem TT/TN)
x 1 / 2
x 1
x 2
x 5
AUTO
0.3A
1.0A
1.1A
3.0A
3.1A
6.5A
6.6A
10.0A
GS
GS
GS
AC 999 999 999 999 999 999 200 250
A/F 999 999 999 999 999 999 200 250
B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 200 250 A/F 999 999 999 999 999 999 200 250 B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 200 250 A/F 999 999 999 999 999 999 200 250 B/B+
AC 999 999 999 999 999 999 200 250 A/F 999 999 999 999 999 999 B/B+
G S 50 150 50 150
50 150 50 150
50 150 50 150
GS
G S 310 310 310 310 310
310 310
Resolution: 1ms, Accuracy: (2.0rdg + 2dgt)
Earth leakage delay tester RCDs trip out time range [ms] (IT system) (*)
x 1 / 2
x 1
x 2
x 5
GS
GS
GS
GS
0.3A
3.0A
AC A/F B/B+
999 999 999 999 999 999 200 250 999 999 999 999 999 999 200 250
50 150 50 150
3.1A
6.5A
AC A/F B/B+
999 999 999 999 999 999 200 250 999 999 999 999 999 999 200 250
50 150 50 150
6.6A
10.0A
AC A/F B/B+
999 999 999 999 999 999 200 250 999 999 999 999 999 999 200 250
Resolution: 1ms, Accuracy: (2.0rdg + 2dgt) (*) Selection RCD type A/F and type B/B+ available only for Norway country
AUTO G S
G S 310
310
NoTripTest Non-trip earth loop impedance
Ujian voltage:
100265V (Line-PE), 50/60Hz 5%
NoTripTest Systems with Neutral wire
Julat []
Resolusi []
Ketepatan (*)
0.01 9.99
0.01
(5 reading + N/10)
10.0 199.9
0.1
(5 reading + N)
200 1999
1
(5 reading + 3N)
(*) If IN <30mA, test current = IN/2 and N[]=30/IN; if IN 30mA, test current <15mA and N=1
NoTripTest Systems without Neutral wire
Julat []
Resolusi []
Ketepatan (*)
1 1999
1
-0%, +(5.0 lettura +N)
(*) if IN <30mA, test current = IN/2 and N[]=(10×30)/IN ; If IN 30mA, test current IN/2 and N[]=(3×30)/IN
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
DIMANA KITA BERADA
MACROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 4 of 6
Hubungi voltage (RCD dan NoTripTest)
Julat [V]
Resolusi [V]
0 Utlim
0.1
Hubungi voltage (EARTH test TT system)
Julat [V]
Resolusi [V]
0 99.9
0.1
Hubungi voltage (EARTH test TN system)
Julat [V]
Resolusi [V]
0 99.9
0.1
100 999
1
Rintangan tanah dengan kaedah 3 wayar
Julat []
Resolusi []
0.01 9.99
0.01
10.0 99.9
0.1
100 999
1
1.00k 49.99k
0.01k
Ujian semasa:
<10mA 77.5Hz, Open-circuit voltage: < 20Vrms
(*) Tambahkan 5% pada ketepatan jika rintangan probe (Rs atau Rh) > 100 x Rmeas
Accuracy -0%, +(5.0 rdg + 3V)
Accuracy -0%, +(5.0 rdg + 3V)
Accuracy -0%, +(5.0 rdg + 3V)
Ketepatan (*)
(5.0 rdg + 3dgt)
Kerintangan tanah dengan kaedah Wenner 4 wayar
Julat [m]
Resolution [m]
0.06 9.99
0.01
10.0 99.9
0.1
100 999
1
1.00k 9.99k
0.01k
10.0k 99.9k
0.1k
100k 999k
1k
1.00M 3.14M
0.01M
(*) with distance d=10m, Distance “d” range:
1 10m
Ujian semasa:
<10mA 77.5Hz, Open-circuit voltage: < 20Vrms
Accuracy (*) (5.0 rdg + 3dgt)
Putaran urutan fasa dengan kaedah 1 wayar
Voltagjulat PN, P-PE[V]
Julat kekerapan
100 265
50Hz/60Hz 5%
Pengukuran hanya dilakukan dengan sentuhan langsung dengan bahagian hidup logam (bukan pada sarung penebat)
Voltage drop on main power lines (V%)
Julat (%)
Resolusi (%)
0 100
0.1
Accuracy (10.0 rdg + 4dgt)
Arus kebocoran (oleh HT96U pilihan clamp transduser)
Julat [mA]
Resolusi [mA]
0.5 999.9
0.1
Accuracy (5.0 rdg + 2dgt)
Parameter persekitaran (fungsi AUX)
Parameter
Julat
Suhu [°C]
-20 ° C 80 ° C
Suhu [°F]
-4°F 176°F
Kelembapan relatif [%HR]
0 100%HR
Output DC voltage
0.1mV 1.0V
0.001Lux 20.00 Lux (*)
Pencahayaan [Lux]
0.1 Lux 2000 Lux (*)
1 Lux 20 kLux (*)
(*) Ketepatan probe HT53 lux adalah mengikut Kelas AA
Peleraian 0.1 °C 0.1 °F
0.1% UR 0.1mV
0.001 0.02 Lux 0.1 2 Lux 1 20 Lux
Accuracy (2.0rdg+2dgt)
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
DIMANA KITA BERADA
MACROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 5 of 6
Pengukuran parameter utama dan harmonik (PQA)
AC TRMS Voltage
Range [V] 15.0 459.9
Allowed crest factor
Resolution [V] 0.1V
1,5 ; Frequency: 42.5 69.0 Hz
Ketepatan (1.0rdg + 1dgt)
Kekerapan
Julat [Hz]
Resolusi [Hz]
42.5 69.0
0.01
Dibenarkan voltage: 15.0 459.9V ; Allowed current: 5%FS clamp FS clamp
Ketepatan (2.0rdg + 2dgt)
AC TRMS Arus
FS clamp
Julat [A]
10A
5% FS 9.99
10A FS 200
5% FS 199.9
200A FS 3000
5% FS 2999
Range: 5 999.9 mV; Values under 5mV are zeroed
Allowed crest factor
3; Frequency: 42.5 69.0 Hz
Resolusi [A] 0.01 0.1 1
Ketepatan
1Ph: (1.0rdg + 3 dgt) 3Ph: (2.0rdg + 5 dgt)
Active power (@ 230V in 1Ph systems, 400V in 3Ph systems, cos=1, f=50.0Hz)
FS clamp
Julat [kW]
Resolusi [kW]
Ketepatan
10A
0.000 9.999
0.001
10A FS 200
0.00 999.99
0.01
1Ph: (2.0rdg + 5 dgt)
200A FS 1000
0.0 999.9
0.1
3Ph: (2.5rdg + 8 dgt)
1000A FS 3000
0 9999
1
Reactive power (@ 230V in 1Ph systems, 400V in 3Ph systems, cos=0, f=50.0Hz)
FS clamp
Julat [kVAr]
Resolusi [kVAr]
Ketepatan
10A
0.000 9.999
0.001
10A FS 200
0.00 999.99
0.01
1Ph: (2.0rdg + 7 dgt)
200A FS 1000
0.0 999.9
0.1
3Ph: (3.0rdg + 8 dgt)
1000A FS 3000
0 9999
1
Faktor kuasa (@ 230V dalam sistem 1Ph, 400V dalam sistem 3Ph, f=50.0Hz)
Julat
Resolusi
Ketepatan
0.70c 1.00 0.70i
0.01
(4.0rdg + 10dgt) if I 10%FS (2.0rdg + 3dgt) if I > 10%FS
cos (@ 230V in 1Ph systems, 400V in 3Ph systems, f=50.0Hz)
Julat
Resolusi
Ketepatan
0.70c 1.00 0.70i
0.01
(4.0rdg + 10dgt) if I 10%FS (1.0rdg + 7dgt) if I > 10%FS
Voltage harmonik (@ 230V dalam sistem 1Ph, 400V dalam sistem 3Ph, f=50.0Hz)
Julat [%]
Resolusi [%]
Pesanan
Ketepatan
0.1 100.0
0.1
01 25
(5.0rdg + 5dgt)
Frequency of fundamental: 42.5 69.0 Hz, DC accuracy not declared
Harmonik semasa (f=50Hz)
Julat [%]
Resolusi [%]
0.1 100.0
0.1
Pesanan 01 9 10 17 18 25
Accuracy (5.0rdg + 5dgt) (10.0rdg + 5dgt) (15.0rdg + 10dgt)
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
DIMANA KITA BERADA
MACROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 6 of 6
2. SPESIFIKASI AM
DISPLAY AND MEMORY: Features: Memory: Communication:
Touch screen, color graphic LCD, 320x240mm 999 locations, 3 marker levels Optical-USB and built-in WiFi
POWER SUPPLY: Batteries: Battery life: Auto Power OFF:
6 x 1.2V(rechargeable) type AA or 6 x 1.5V type AA > 500 test for each function after 5 min of idleness (disabled)
MECHANICAL FEATURES: Dimensions (L x W x H): Weight (included batteries):
WORKING ENVIRONMENTAL CONDITIONS: Reference temperature: Working temperature: Allowed relative humidity: Storage temperature: Storage humidity:
TEST VERIFIES REFERENCE STANDARDS: Continuity test with 200mA: Insulation resistance: Earth resistance: Fault loop impedance: RCD test: Multifunction: Prospective short circuit current: Earth resistance on TN systems:
225 x 165 x 75mm 1.2kg
23°C 5°C 0°C 40°C <80%RH -10°C 60°C <80%RH
IEC/EN61557-4 IEC/EN61557-2 IEC/EN61557-5 IEC/EN61557-3 IEC/EN61557-6 IEC/EN61557-10 EN60909-0 EN61936-1 + EN50522
GENERAL REFERENCE STANDARDS: Safety of measuring instruments: Product type standard: Technical documentation : Insulation: Pollution degree: Encapsulation :
Overvoltage category: Max height of use:
IEC/EN61010-1, IEC/EN61010-031, IEC/EN61010-2-032 IEC/EN61557-1 IEC/EN61187 double insulation 2 IP40
CAT IV 300V (to ground), max 415V between inputs 2000m
Instrumen ini memenuhi keperluan Vol Rendahtage Directive 2014/35/EU (LVD), EMC Directive 2014/35/EU and Directive RED 2014/53/EU
Instrumen ini memenuhi keperluan Arahan Eropah 2011/65/EU (RoHS) dan 2012/19/EU (WEEE)
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
DIMANA KITA BERADA
Diensten van EURO-INDEX
EURO-INDEX adalah fabrikan, pengimport dan pengedar pelbagai A-merken op het gebied van test- en meetinstrumenten. Daarnaast leveren wij een groot aanntal diensten om het gebruik van deze instrumenten in uw bedrijfsvoering te optimaliseren. Dit omvat uiteraard onderhoud, reparatie en kalibratie van de instrumenten, dan ook kennisdeling melalui EURO-INDEX Academy and verhuur van instrumenten.
Geautoriseerd Service Centrum EURO-INDEX bv adalah van alle vertegenwoordigde merken een Geautoriseerd Service Centrum. Dit betekent dat uw instrumenten worden behandeld door technici die zijn opgeleid door de fabrikant and beschikken over de juiste gereedschappen en software. Er worden uitsluitend originele onderdelen toegepast en de garantie van uw instrument, evenals de certificering (ATEX, EN50379, dsb.) blijven utuh.
Kalibratielaboratorium
Ons moderne service- en kalibratielaboratorium beschikt over een
Akreditasi RvA dengan NEN-EN-ISO/IEC 17025. Deze akreditasi
geldt voor grootheden, zoals gespecificeerd in de skop bij accreditatienummer K105.
Lebih banyak maklumat
Kijk voor een overzicht van al onze diensten op euro-index.nl/diensten
Perkhidmatan Mobile
Naast de vaste kalibratielaboratoria di Capelle aan den IJssel
en Zaventem beschikken wij ook over laboratoria op wielen met
dengan nama "Perkhidmatan Mudah Alih". Dit biedt vertrouwde
perkhidmatan en kwaliteit, bij u voor de deur!
Lebih banyak maklumat
KWS®
KWS® ialah sistem perkhidmatan yang unik untuk anda bertemu dengan instrumen
met periodiek onderhoud en kalibratie tegen vaste, lage kosten.
Uw kalibratiecertificaten zijn digitaal beschikbaar via Mijn KWS (gratis webportal en app).
Lebih banyak maklumat
Verhuur van meetinstrumen
Pelbagai jenis Uitgebreid
Nauwkeurigheid aantoonbaar door actueel kalibratiecertificaat
Deskundig advies Complete levering inclusief accessoires
Lebih banyak maklumat
EURO-INDEX Academy Trainingen (individueel en klassikaal) Cursussen en workshops Demonstratie- en instructievideo’s Whitepapers
Lebih banyak maklumat
Servicebalie
Onderhoud, reparatie dan kalibratie
Cursussen dalam bengkel
Perkhidmatan Mobile
Wijzigingen voorbehouden EURO-INDEX® NL 24005
Dokumen / Sumber
 |
HT INSTRUMENTS MACROTESTG3 Multifunction Multi Tester [pdf] Arahan MACROTESTG3 Multifunction Multi Tester, MACROTESTG3, Multifunction Multi Tester, Multi Tester |