HT INSTRUMENTS MACROTESTG3 Multifunction Multi Tester
Spesifikasies
- Oopkring voltage: 4V tot 12V
- Isolasie weerstand (DC voltage):
- Toets voltage [V]
- Reeks [M]
- Resolution [M]
- Akkuraatheid
- Maksimum toetsstroom: 5.81A (at 265V); 10.10A (at 457V)
- Toets voltage reekse: 100-265V (Line-Neutral) / 100-460V (Line-Line); 50/60Hz ±5%
- Veiligheidsbeskerming: Z-lyn (lyn-lyn, lyn-neutraal, lyn-PE)
- Isolasie materiaal: PVC, Rubber butyl, EPR, XLPE
- First fault current (IT systems):
- Omvang (mA)
- Resolusie (mA)
- Beperk kontak voltage (ULIM): 25V, 50V
Electrical Safety Testing
- Connect the safety tester according to the specified voltage reeks.
- Select the appropriate insulation resistance test voltage.
- Measure the insulation resistance and ensure it falls within the specified accuracy range.
- Check the maximum test current and ensure it is within the safe limits for testing.
- Perform first fault current tests as required.
RCD toets
- Select the RCD type and rated tripping currents for testing.
- Set the Line-PE and Line-N voltage volgens die spesifikasies.
- Perform RCD Molded type tripping time range tests based on the specific RCD type and current settings.
"`
Oopkring voltage: Short circuit current: Nominal test current: Safety protection:
nominal test voltage 0% +10% <6.0mA at 500V test voltage
>1mA if load= 1k*Vnom (Vnom=50V, 100V, 250V, 500V, 1000V) the display shows an error message for input voltage> 10V
Z-lyn (lyn-lyn, lyn-neutraal, lyn-PE)
Reeks []
Resolusie []
Akkuraatheid
0.00 199.9 m (*) 200 1999 m (*)
0.1 m (*) 1 m (*)
(5.0 rdg + 1m) (*)
0.01 9.99 10.0 199.9
0.01 0.1
(5.0 rdg + 3dgt)
(*) By means of IMP57 optional accessory
Maksimum toetsstroom
5.81A (at 265V); 10.10A (at 457V)
Toets voltage ranges: Protection type: Insulation materials:
100265V (Line-Neutral) / 100460V (Line-Line); 50/60Hz 5% MCB (B, C, D, K), Fuse (gG, aM) PVC, Rubber butyl, EPR, XLPE
Eerste foutstroom (IT-stelsels)
Omvang (mA)
Resolusie (mA)
0.1 0.9
0.1
1 999
1
Beperk kontak voltage (ULIM)
25V, 50V
Accuracy (5.0 rdg + 1dgt) (5.0 rdg + 3dgt)
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
WAAR ONS IS
MAKROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 2 of 6
RCD-toets (Gevormde omhulseltipe)
RCD type:
AC ( ), A/F ( ), B/B+( ) General (G), Selective (S) and Delayed ( )
Rated tripping currents (IN)::
6mA, 10mA, 30mA, 100mA, 300mA, 500mA, 650mA, 1000mA
Line-PE, Line-N voltage:
100V 265V RCD type AC and A/F, 190V 265V RCD type B/B+
Frekwensie:
50/60Hz 5%
RCD tripping current (Molded case type RCD General)
RCD tipe
IN
Range IN [mA] Resolution [mA]
AC, A/F, B/B+
6mA, 10mA
AC, A/F, B/B+ 30mA IN 300mA (0.2 1.1) IN
0.1 IN
AC, A/F 500mA IN 650mA
Accuracy IN – 0%, +10%IN
– 0%, +5%IN
RCD Molded type tripping time range [ms] (TT/TN system)
x 1 / 2
x 1
x 2
x 5
AUTO
GS
GS
GS
GS
GS
6mA 10mA 30mA
m
AC 999 999 999 999 999 999 160 210 A/F 999 999 999 999 999 999 160 210 B/B+ 999 999 999 999 999 999 AC 999 999 999 999 999 999 160 210 A/F 999 999 999 999 999 999 160 210 B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 160 210 A/F 999 999 999 999 999 999 160 210
50 150 50 150
50 150 50 150
50 150 50 150
B/B+ 999 999 999 999 999 999 AC 999 999 999 999 999 999 160 210 100mA A/F 999 999 999 999 999 999 160 210
50 150 50 150
B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 160 210 300mA A/F 999 999 999 999 999 999 160 210
B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 160 210
500mA 650mA
A / F
999 999 999 999 999 999 160 210
B/B+
50 150 50 150
50 150
AC 999 999 999 999 999 999 160 210 1000mA A/F 999 999 999 999 999 999
B/B+
Resolution: 1ms, Accuracy: (2.0rdg + 2dgt)
RCD Molded type tripping time range [ms] (IT system) (*)
GS
310 310 310 310 310 310
310 310 310 310 310 310 310 310 310 310 310
AUTO+ G S
x 1 / 2
x 1
x 2
x 5
AUTO
GS
GS
GS
GS
GS
6mA AC 999 999 999 999 999 999 160 210
10mA A/F 999 999 999 999 999 999 160 210
30mA B/B+ 999 999
999 999
100mA 300mA
AC A/F B/B+
999 999 999
999 999 999
999 999
999 999 999
999 999 999
999 999
160 160
210 210
500mA 650mA
AC A/F B/B+
999 999
999 999
999 999
999 999
999 999
999 999
160 160
210 210
50 150 50 150
50 150 50 150
50 150
AC 999 999 1000mA A/F 999 999
B/B+
999 999 999 999
160 210
Resolution: 1ms, Accuracy: (2.0rdg + 2dgt) (*) Selection RCD type A/F and type B/B+ available only for Norway country
GS
310 310 310 310 310
AUTO+
GS
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
WAAR ONS IS
MAKROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 3 of 6
Toets op aardlek-vertragingstoetser RCD's (met RCDX10 opsionele bykomstigheid)
RCD type: Rated tripping currents (IN):: Line-PE, Line-N voltage: Frekwensie:
AC ( ), A/F ( ), B/B+( ) General (G), Selective (S) and Delayed ( ) 0.3A 10A (type AC, A/F) ; 0.3A 3.0A (type B/B+) 100V 265V RCD type AC and A/F, 190V 265V RCD type B/B+ 50/60Hz 5%
Aardlek-vertragingstoetser RCD's uitskakelstroom (RCD Algemeen)
RCD tipe
IN
Range IN [mA] Resolution [mA]
Accuracy IN
AC, A/F, B/B+ AC, A/F
300mA IN 1A 1.1A IN 10A
(0.3 1.1) IN
0.1in
– 0%, +5%IN
Aardlekkasie-vertragingstoetser RCD's skakel uit tydreeks [ms] (TT/TN-stelsel)
x 1 / 2
x 1
x 2
x 5
AUTO
0.3A
1.0A
1.1A
3.0A
3.1A
6.5A
6.6A
10.0A
GS
GS
GS
AC 999 999 999 999 999 999 200 250
A/F 999 999 999 999 999 999 200 250
B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 200 250 A/F 999 999 999 999 999 999 200 250 B/B+ 999 999 999 999 999 999
AC 999 999 999 999 999 999 200 250 A/F 999 999 999 999 999 999 200 250 B/B+
AC 999 999 999 999 999 999 200 250 A/F 999 999 999 999 999 999 B/B+
G S 50 150 50 150
50 150 50 150
50 150 50 150
GS
G S 310 310 310 310 310
310 310
Resolution: 1ms, Accuracy: (2.0rdg + 2dgt)
Earth leakage delay tester RCDs trip out time range [ms] (IT system) (*)
x 1 / 2
x 1
x 2
x 5
GS
GS
GS
GS
0.3A
3.0A
AC A/F B/B+
999 999 999 999 999 999 200 250 999 999 999 999 999 999. 200
50 150 50 150
3.1A
6.5A
AC A/F B/B+
999 999 999 999 999 999 200 250 999 999 999 999 999 999. 200
50 150 50 150
6.6A
10.0A
AC A/F B/B+
999 999 999 999 999 999 200 250 999 999 999 999 999 999. 200
Resolution: 1ms, Accuracy: (2.0rdg + 2dgt) (*) Selection RCD type A/F and type B/B+ available only for Norway country
AUTO G S
G S 310
310
NoTripTest Non-trip earth loop impedance
Toets voltage:
100265V (Line-PE), 50/60Hz 5%
NoTripTest Systems with Neutral wire
Reeks []
Resolusie []
Akkuraatheid (*)
0.01 9.99
0.01
(5 reading + N/10)
10.0 199.9
0.1
(5 reading + N)
200 1999
1
(5 reading + 3N)
(*) If IN <30mA, test current = IN/2 and N[]=30/IN; if IN 30mA, test current <15mA and N=1
NoTripTest Systems without Neutral wire
Reeks []
Resolusie []
Akkuraatheid (*)
1 1999
1
-0%, +(5.0 lettura +N)
(*) if IN <30mA, test current = IN/2 and N[]=(10×30)/IN ; If IN 30mA, test current IN/2 and N[]=(3×30)/IN
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
WAAR ONS IS
MAKROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 4 of 6
Kontak voltage (RCD en NoTripTest)
Reeks [V]
Resolusie [V]
0 Utlim
0.1
Kontak voltage (EARTH test TT system)
Reeks [V]
Resolusie [V]
0 99.9
0.1
Kontak voltage (EARTH test TN system)
Reeks [V]
Resolusie [V]
0 99.9
0.1
100 999
1
Grondweerstand met 3-draad metode
Reeks []
Resolusie []
0.01 9.99
0.01
10.0 99.9
0.1
100 999
1
1.00k 49.99k
0.01k
Toetsstroom:
<10mA 77.5Hz, Open-circuit voltage: < 20Vrms
(*) Voeg 5% by die akkuraatheid as die sondeweerstande (Rs of Rh) > 100 x Rmeas
Accuracy -0%, +(5.0 rdg + 3V)
Accuracy -0%, +(5.0 rdg + 3V)
Accuracy -0%, +(5.0 rdg + 3V)
Akkuraatheid (*)
(5.0 rdg + 3dgt)
Grondweerstand met 4-draad Wenner-metode
Reikwydte [m]
Resolution [m]
0.06 9.99
0.01
10.0 99.9
0.1
100 999
1
1.00k 9.99k
0.01k
10.0k 99.9k
0.1k
100k 999k
1k
1.00M 3.14M
0.01 miljoen
(*) with distance d=10m, Distance “d” range:
1 10m
Toetsstroom:
<10mA 77.5Hz, Open-circuit voltage: < 20Vrms
Accuracy (*) (5.0 rdg + 3dgt)
Fasevolgorde rotasie met 1-draad metode
Voltage reeks PN, P-PE[V]
Frekwensie reeks
100 265
50Hz/60Hz 5%
Meting word slegs uitgevoer deur direkte kontak met metaal lewende dele (nie op isolasie omhulsel nie)
Voltage drop on main power lines (V%)
Omvang (%)
Resolusie (%)
0 100
0.1
Accuracy (10.0 rdg + 4dgt)
Lekstroom (deur HT96U opsionele klamp transducer)
Reeks [mA]
Resolusie [mA]
0.5 999.9
0.1
Accuracy (5.0 rdg + 2dgt)
Omgewingsparameters (AUX-funksie)
Parameter
Reeks
Temperatuur [°C]
-20°C 80°C
Temperatuur [°F]
-4°F 176°F
Relatiewe humiditeit [%HR]
0 100%HR
GS -uitset voltage
0.1mV 1.0V
0.001Lux 20.00 Lux (*)
Verligting [Lux]
0.1 Lux 2000 Lux (*)
1 Lux 20 kLux (*)
(*) Akkuraatheid van HT53 lux sonde is volgens Klas AA
Resolution 0.1 °C 0.1 °F
0.1% UR 0.1mV
0.001 0.02 Lux 0.1 2 Lux 1 20 Lux
Accuracy (2.0rdg+2dgt)
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
WAAR ONS IS
MAKROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 5 of 6
Meting van hoofparameters en harmonieke (PQA)
AC TRMS Voltage
Range [V] 15.0 459.9
Allowed crest factor
Resolution [V] 0.1V
1,5 ; Frequency: 42.5 69.0 Hz
Accuracy (1.0rdg + 1dgt)
Frekwensie
Omvang [Hz]
Resolusie [Hz]
42.5 69.0
0.01
Toegelaat voltage: 15.0 459.9V ; Allowed current: 5%FS clamp FS clamp
Accuracy (2.0rdg + 2dgt)
AC TRMS Stroom
FS clamp
Reeks [A]
10A
5% FS 9.99
10A FS 200
5% FS 199.9
200A FS 3000
5% FS 2999
Range: 5 999.9 mV; Values under 5mV are zeroed
Allowed crest factor
3; Frequency: 42.5 69.0 Hz
Resolusie [A] 0.01 0.1 1
Akkuraatheid
1Ph: (1.0rdg + 3 dgt) 3Ph: (2.0rdg + 5 dgt)
Active power (@ 230V in 1Ph systems, 400V in 3Ph systems, cos=1, f=50.0Hz)
FS clamp
Reeks [kW]
Resolusie [kW]
Akkuraatheid
10A
0.000 9.999
0.001
10A FS 200
0.00 999.99
0.01
1Ph: (2.0rdg + 5 dgt)
200A FS 1000
0.0 999.9
0.1
3Ph: (2.5rdg + 8 dgt)
1000A FS 3000
0 9999
1
Reactive power (@ 230V in 1Ph systems, 400V in 3Ph systems, cos=0, f=50.0Hz)
FS clamp
Reeks [kVAr]
Resolusie [kVAr]
Akkuraatheid
10A
0.000 9.999
0.001
10A FS 200
0.00 999.99
0.01
1Ph: (2.0rdg + 7 dgt)
200A FS 1000
0.0 999.9
0.1
3Ph: (3.0rdg + 8 dgt)
1000A FS 3000
0 9999
1
Kragfaktor (@230V in 1Ph-stelsels, 400V in 3Ph-stelsels, f=50.0Hz)
Reeks
Resolusie
Akkuraatheid
0.70c 1.00 0.70i
0.01
(4.0rdg + 10dgt) if I 10%FS (2.0rdg + 3dgt) if I > 10%FS
cos (@ 230V in 1Ph systems, 400V in 3Ph systems, f=50.0Hz)
Reeks
Resolusie
Akkuraatheid
0.70c 1.00 0.70i
0.01
(4.0rdg + 10dgt) if I 10%FS (1.0rdg + 7dgt) if I > 10%FS
Voltage harmonieke (@ 230V in 1Ph-stelsels, 400V in 3Ph-stelsels, f=50.0Hz)
Reeks [%]
Resolusie [%]
Bestel
Akkuraatheid
0.1 100.0
0.1
01 25
(5.0rdg + 5dgt)
Frequency of fundamental: 42.5 69.0 Hz, DC accuracy not declared
Huidige harmonieke (f=50Hz)
Reeks [%]
Resolusie [%]
0.1 100.0
0.1
Bestel 01 9 10 17 18 25
Accuracy (5.0rdg + 5dgt) (10.0rdg + 5dgt) (15.0rdg + 10dgt)
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
WAAR ONS IS
MAKROTESTG3
Professional installation safety tester
Rel 2.02 of 26/05/25 Pag 6 of 6
2. ALGEMENE SPESIFIKASIES
DISPLAY AND MEMORY: Features: Memory: Communication:
Touch screen, color graphic LCD, 320x240mm 999 locations, 3 marker levels Optical-USB and built-in WiFi
POWER SUPPLY: Batteries: Battery life: Auto Power OFF:
6 x 1.2V(rechargeable) type AA or 6 x 1.5V type AA > 500 test for each function after 5 min of idleness (disabled)
MECHANICAL FEATURES: Dimensions (L x W x H): Weight (included batteries):
WORKING ENVIRONMENTAL CONDITIONS: Reference temperature: Working temperature: Allowed relative humidity: Storage temperature: Storage humidity:
TEST VERIFIES REFERENCE STANDARDS: Continuity test with 200mA: Insulation resistance: Earth resistance: Fault loop impedance: RCD test: Multifunction: Prospective short circuit current: Earth resistance on TN systems:
225 x 165 x 75 mm 1.2 kg
23°C 5°C 0°C 40°C <80%RH -10°C 60°C <80%RH
IEC/EN61557-4 IEC/EN61557-2 IEC/EN61557-5 IEC/EN61557-3 IEC/EN61557-6 IEC/EN61557-10 EN60909-0 EN61936-1 + EN50522
GENERAL REFERENCE STANDARDS: Safety of measuring instruments: Product type standard: Technical documentation : Insulation: Pollution degree: Encapsulation :
Oorvoltage category: Max height of use:
IEC/EN61010-1, IEC/EN61010-031, IEC/EN61010-2-032 IEC/EN61557-1 IEC/EN61187 double insulation 2 IP40
CAT IV 300V (to ground), max 415V between inputs 2000m
Hierdie instrument voldoen aan die vereistes van Low Voltage Directive 2014/35/EU (LVD), EMC Directive 2014/35/EU and Directive RED 2014/53/EU
Hierdie instrument voldoen aan die vereistes van Europese Richtlijn 2011/65/EU (RoHS) en 2012/19/EU (WEEE)
HT ITALIA SRL Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M export@ht-instruments.com | ht-instruments.com
WAAR ONS IS
Dienste van EURO-INDEX
EURO-INDEX is vervaardiger, importeur en distributeur van diverse A-merke op die gebied van toets- en meetinstrumente. Verder lewer ons 'n groot aantal dienste om hierdie instrumente te gebruik in jou bedryfsvoering om te optimaliseer. Dit bevat natuurlik onderhoud, herstel en kalibrasie van die instrumente, maar ook kennisdeling via die EURO-INDEX Academy en verhuur van instrumente.
Geautoriseerde Dienssentrum EURO-INDEX bv is van alle verteenwoordigende merke 'n Geautoriseerde Dienssentrum. Dit dui aan dat jou instrumente hanteer word deur tegnici wat deur die vervaardiger opgelaai is en oor die regte gereedskap en sagteware beskik. Dit word slegs oorspronklike onderdelen toegepas en die waarborg van u instrument, sowel as die sertifisering (ATEX, EN50379, ens.) bly ongeskonde.
Kalibratielaboratorium
Ons moderne diens- en kalibratielaboratorium beskik oor 'n
RvA akkreditasie na NEN-EN-ISO/IEC 17025. Hierdie akkreditasie
geldt vir grootheden, soos gespecificeerd in die omvang by akkreditasienummer K105.
Meer inligting
Kyk vir 'n oorsig van al ons dienste op euro-index.nl/dienste
Mobiele diens
Naas die vaste kalibratielaboratoria in Capelle aan den IJssel
en Zaventem het ons ook oor laboratoria op wielen met
die naam "Mobiele Service". Dit bied vertroude
diens en kwaliteit, by u voor die deur!
Meer inligting
KWS®
KWS® is 'n unieke diensstelsel vir jou meetinstrumente
met periodiek onderhoud en kalibratie teen vaste, lage koste.
Jou kalibratiecertificaten is digitaal beskikbaar via My KWS (gratis webportaal en app).
Meer inligting
Verhuur van meetinstrumenten
Uitgebreid assortiment
Nauwkeurigheid aantoonbaar deur actueel kalibratiecertificaat
Deskundig advies Complete levering inclusief accessoires
Meer inligting
EURO-INDEX Academy Trainingen (individueel en klassikaal) Cursussen en workshops Demonstratie- en instructievideo’s Whitepapers
Meer inligting
Diensbalie
Onderhoud, reparatie en kalibratie
Cursussen en werkswinkels
Mobiele diens
Wijzigingen voorbehou EURO-INDEX® NL 24005
Dokumente / Hulpbronne
 |
HT INSTRUMENTS MACROTESTG3 Multifunction Multi Tester [pdf] Instruksies MACROTESTG3 Multifunction Multi Tester, MACROTESTG3, Multifunction Multi Tester, Multi Tester |